IBM TotalStorage Ultrium Tape Library 3582 Model L23 automates IBM TotalStorage LTO Ultrium 2 Tape Drives

Transcription

1 Hardware Announcement September 9, 2003 IBM TotalStorage Ultrium Tape Library 3582 Model L23 automates IBM TotalStorage LTO Ultrium 2 Tape Drives Overview Protect your network s data and eliminate individual tape handling with the IBM TotalStorage Ultrium Tape Library 3582 Model L23, an entry tape library that incorporates high-performance IBM TotalStorage LTO Ultrium 2 Tape Drives for the midrange open systems environment. The Ultrium Tape Library 3582 Model L23 can accommodate one or two Ultrium 2 Tape Drives and is available standard with a one-cartridge I/O station and 23 data cartridge slots, giving a native library capacity of up to 4.8 TB uncompressed data storage (9.6 TB with 2:1 compression). Tape cartridge capacity is up to 200 GB native capacity (400 GB with 2:1 compression) with the IBM TotalStorage LTO Ultrium 200 GB Data Cartridge, and drive performance is up to 35 MB/sec native data transfer rate (70 MB/sec with 2:1 compression) with the IBM LTO Ultrium 2 Tape Drives. The Ultrium 2 Tape Drives come in 2-Gbps switched fabric Fibre Channel, LVD Ultra160 SCSI, or HVD Ultra SCSI interfaces to attach to a wide spectrum of open system servers. The Ultrium Tape Library 3582 Model L23 has two 7-cartridge removable cartridge magazines, a bar code reader, and the patented Multi-Path architecture to partition the library into two logical libraries. The library can be mounted in an industry-standard 19-inch rack or as an optional stand-alone desktop unit (part number 18P9237). Options include: Additional 3582 Ultrium 2 LVD Tape Drive (18P9234) Additional 3582 Ultrium 2 HVD Tape Drive (18P9235) Additional 3582 Ultrium 2 Fibre Tape Drive (18P9236) 3582 Stand-alone Cover Kit (18P9237) 3582 Magazine Kit with Dust Cover (18P9238) 3582 Remote Management Unit (18P9239) The Ultrium Tape Library 3582 Model L23 can be used in network-attached storage implementations, including backups and mass storage archives where multi-terabyte capacities are required. IBM LTO Ultrium technology is designed for the heavy demands of automated tape systems. This tape technology has enhanced digital speed matching, power management, channel calibration, servo technology, track layout, head design, error correction codes, and data compression. The results are increased capacity, performance, and reliability in automated tape systems. Storage and tape management for the Ultrium Tape Library is provided by software such as Tivoli Storage Manager and other industry-leading compatible software offerings. Key prerequisites Appropriate levels of host software are required to attach the Ultrium Tape Library 3582 Model L23 with IBM LTO Ultrium 2 Tape Drives to selected IBM xseries, IBM iseries, AS/400, IBM pseries, RS/6000, RS/6000 SP, IBM zseries Linux, Sun, Microsoft Windows NT, Windows 2000, Windows 2003, Linux, and other UNIX and PC servers. Refer to the Technical information section for details. At a glance The Ultrium Tape Library 3582 Model L23 combines IBM tape and automation reliability at open systems prices. Features include: LTO Ultrium 2 native data capacities up to 4.8 TB (up to 9.6 TB using 2:1 compression) Use of LTO Ultrium 2 Tape Drives with a drive data rate of up to 70 MB/second (2:1 data compression) Up to two SCSI or native switched fabric Fibre Channel drive attachments Multi-path support for single or multi-server attachment of homogeneous or heterogeneous systems Rack-mount or stand-alone desktop configuration For ordering, contact: Your IBM representative, an IBM Business Partner, or the Americas Call Centers at 800-IBM-CALL Reference: YE001 Planned availability date September 12, 2003 This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: IBM United States IBM is a registered trademark of International Business Machines Corporation

2 Description The Ultrium Tape Library 3582 Model L23 is an excellent choice if you are: Experiencing growth in online storage requirements Considering an entry tape automation solution for your data storage needs Considering an Ultrium tape solution The Ultrium Tape Library 3582 Model L23 contains one or two IBM LTO Ultrium 2 Tape Drives. The Ultrium Tape Library contains 23 cartridge slots and a one-slot I/O station, providing a native library capacity of up to 4.8 TB (9.6 TB with 2:1 compression). Single-drive units can be upgraded to accommodate two drives Model L23 features Each Ultrium Tape Library 3582 Model L23 has an operator control panel on the front with a Liquid Crystal Display (LCD) and a five-button keypad. The keypad controls navigation through the library menu for displaying status information and error codes on the LCD. From this panel, the operator can initiate actions such as moving and loading tape cartridges or invoking diagnostics. The 3582 Model L23 has two removable magazines. A key lock provides front door locking. The Ultrium Tape Library 3582 Model L23 is designed for either stand-alone desktop operation or rack mount installation into an ANSI/EIA standard 19-inch rack with four EIA units of space. A Remote Management Unit/Specialist option allows network control of the Ultrium Tape Library 3582 Model L23 operations. The IBM LTO Ultrium 2 Tape Drive supports the Ultrium 200 GB Data Cartridge, which is designed for increased tape speeds and high-density data recording. Ultrium 2 Tape Drives The Ultrium Tape Library 3582 Model L23 supports the IBM LTO Ultrium 2 Tape Drive. The IBM LTO Ultrium 2 Tape Drive is the second-generation LTO Ultrium tape drive in the IBM TotalStorage LTO Ultrium family of products. The Ultrium 2 Tape Drive offers the following significant improvements over the Ultrium 1 Tape Drive: Tape drive performance is more than doubled, up to 35 MB/sec native data transfer rate (70 MB/sec with 2:1 compression). Aggregate library data rates of up to 464 GB/hour (with 2:1 compression) for a fully configured two-drive 3582 Model L23 library allow extremely high data transfer performance. IBM Ultrium 2 Tape Drives can read and write original LTO Ultrium Data Cartridges at original Ultrium 1 capacities and with improved performance up to 20 MB/sec native data transfer rate (40 MB/sec with 2:1 compression). Note: Although the IBM Ultrium Tape Drive provides the capability for high tape performance, the actual throughput is a function of many components, such as system processor, disk data rate, data block size, data compressibility, I/O attachments, and the system or application software used. For example, the HVD Ultra SCSI interface has a maximum data transfer rate of 40 MB/sec, so Ultrium Tape Drives on that SCSI interface will have a lower data transfer rate. The compression technology used in the tape drive can potentially double the amount of data that can be stored on the media; however, the actual degree of compression achieved is highly sensitive to the characteristics of the data being compressed. The tape cartridge capacity is potentially doubled up to 200 GB native capacity (400 GB with 2:1 compression) with the use of the new Ultrium 200 GB Data Cartridge. The 3582 Model L23 library can contain up to 4.8 TB (9.6 TB with 2:1 compression), using up to two IBM Ultrium 2 Tape Drives. Digital speed matching The Ultrium 2 Tape Drive is designed to perform dynamic speed matching to adjust the drive s native data rate as closely as possible to the net host data rate (after data compressibility has been factored out). This helps to provide the dual benefit of reducing the number of backhitch repositions and improving throughput performance. Power management The Ultrium 2 Tape Drive power management function controls the drive electronics to be either completely turned off or in a low-power mode. These power modes occur only when the circuit functions are not needed for drive operation. Channel calibration The Ultrium 2 Tape Drive channel calibration feature allows for customization of each read/write data channel for optimum performance. The customization enables compensation for variations in the recording channel transfer function, media characteristics, and read/write head characteristics. Separate writing of multiple filemarks Separate writing of multiple filemarks causes any write command of two or more filemarks to cause a separate dataset to be written containing all filemarks after the first. This feature has two advantages. First, it can help improve performance if a subsequent append overwrites somewhere after the first filemark. Second, write of multiple filemarks typically indicates a point where an append operation might occur after the first of these filemarks. This change can help prevent having to rewrite datasets containing customer data and the first filemark in cases where such an append occurs. Wide attachment options The IBM Ultrium 2 Tape Drives come with LVD Ultra160 SCSI, HVD Ultra SCSI, or switched fabric 2-Gbps Fibre Channel attachments for connection to a wide spectrum of open system servers. Larger internal data buffer There is a 64 MB internal data buffer in the Ultrium 2 Tape Drive as compared to a 32 MB internal data buffer in the Ultrium 1 Tape Drive. Faster cartridge fill times (for both Ultrium 1 and Ultrium 2 data cartridges) The Ultrium 2 Tape Drive can fill an Ultrium GB data cartridge 12% faster, with a sustained data rate 128% better when compared to the Ultrium 1 Tape Drive filling an Ultrium 100 GB data cartridge. The Ultrium 2 Tape Drive can fill an Ultrium 100 GB data cartridge 25% faster, with a sustained data rate 33% better, when compared to the Ultrium 1 Tape Drive. The Ultrium 2 Tape Drive

3 can fill an Ultrium 200 GB data cartridge in 1 hour 44 minutes with a sustained data rate of GB/hr. The Ultrium 2 Tape Drive can fill an Ultrium 100 GB data cartridge in 1 hour 29 minutes with a sustained data rate of 71.9 GB/hr. Faster data access, rewind, and load times The Ultrium 2 Tape Drive has the following improvements: Ultrium 2 Ultrium 1 Cartridge Load Time 15 seconds 18 seconds Maximum Rewind Time 80 seconds 110 seconds Average File Access Time 49 seconds 73 seconds Proven IBM LTO Ultrium 1 features enhanced in the IBM LTO Ultrium 2 Tape Drive include: Servo and track layout technology There are 512 data tracks in the Ultrium 2 tape format versus 384 data tracks in Ultrium 1. Surface Control Guiding Mechanism IBM s patented Surface Control Guiding Mechanism guides the tape along the tape path in the IBM Ultrium Tape Drive. This method uses the surface of the tape, rather than the edges, to control tape motion. This is designed to result in less tape damage (especially to the edges of the tape) and less tape debris, which can come from the damaged edges and can accumulate in the head area. Magneto Resistive (MR) head design Use of flat lap head technology in MR heads for the Ultrium 2 Tape Drive can help minimize contact and wear on the tape as it moves over the read/write heads. LTO Data Compression (LTO-DC) The Ultrium 2 Tape Drive uses LTO-DC which is an implementation of a Lempel-Ziv class 1 (LZ-1) data compression algorithm. LTO-DC is an extension of Adaptive Lossless Data Compression (ALDC) and an improvement over previous lossless compression algorithms. Users of LTO-DC can expect to achieve better data compression as users of ALDC. LTO Cartridge Memory (LTO-CM) Contained within the LTO Ultrium data cartridge is the LTO-CM, which is a passive, contactless silicon storage device that is physically a part of the cartridge. The LTO-CM is used to hold information about that specific cartridge, the media in the cartridge, and the data on the media. The storage capacity of the LTO-CM is 4,096 bytes. Communication between the drive and the LTO-CM is via a low-level RF field transmitted by the drive to the cartridge. Statistical Analysis and Reporting System (SARS) The Ultrium 2 Tape Drive uses the SARS to assist in isolating failures between media and hardware. The SARS uses the cartridge performance history saved in the CM module and the drive performance history kept in the drive flash EEPROM to determine the more likely cause of failure. The SARS can cause the drive to request a cleaner tape, to mark the media as degraded, and to indicate that the hardware has degraded. Multi-Path support The patented Multi-Path function of the Ultrium Tape Library 3582 Model L23 supports a sharing of the library robotics. This is accomplished by partitioning the library into two multiple logical libraries and providing each logical library its own separate and distinct drive, control path, and storage slots. The input/output (I/O) slot is shared on a first-come-first-served basis. This type of partitioning is designed to allow heterogeneous applications to share the library robotics independent of each other. Cartridges under library control are not shared between logical libraries, nor allowed to be moved between logical libraries. An example of heterogeneous sharing is a Windows 2000 application using the drive and storage slots of one logical library while a UNIX application uses the drive and slots of another logical library. High-performance tape cartridge The tape cartridge capacity of the IBM TotalStorage Ultrium 200 GB Data Cartridge has doubled over the original IBM TotalStorage Ultrium Data Cartridge to 200 GB native capacity (400 GB with 2:1 compression). Both cartridges have been designed to provide several enhancements over previous tape technologies. They are designed to work with tape drives that have increased tape speeds and high-density data recording. The case is specially designed for use in automated libraries and is designed for repeated, unattended, trouble-free handling. The tape itself is an advanced metal particle tape developed for durability and capacity. Product positioning As you compare competitive tape solutions, consider: Capacity and performance requirements Data integrity, reliability, and availability Storage usage and application requirements Affordability Loyalty to legacy or existing tape formats The Ultrium Tape Library 3582 Model L23 and compatible software applications lead in addressing these requirements and constitute a functionally rich tape storage solution incorporating LTO Ultrium tape technology. You can help gain flexibility of automated tape library management and unattended save/restore operations. The Ultrium Tape Library is an excellent choice for tape automation for xseries, pseries, RS/6000, iseries, AS/400, and other popular open systems. The 3582 Model L23 utilizes the patented Multi-Path architecture to help allow homogeneous or heterogeneous open systems applications to share the library robotics. The Ultrium Tape Library 3582 Model L23 offers a 24 cartridge capacity and holds up to two IBM LTO Ultrium 2 Tape Drives. It provides excellent price/performance in the open systems environments where the tape automation requirements are satisfied by one to two drives or a library capacity of up to 9.6 TB (with 2:1 compression) or up to 4.8 TB native. The 3582 Model L23 is designed to address growing storage requirements and shrinking backup windows and is part of a family of IBM TotalStorage LTO Ultrium tape products. The 3582 Model L23 is an excellent tape storage solution for customers with existing digital linear tape experience or requiring high-performance automated tape backup. In addition to reading and writing on IBM LTO Ultrium-format tape cartridges, the Ultrium 2 Tape Drives provide an enhanced functional alternative to DLT/SDLT, 1/4-inch, 4mm, 8mm/AIT, or IBM Magstar MP 3570 tape drives. For capacity requirements in the 3.6 TB to 28.8 TB (compressed) range with a scalable automation need, the Ultrium Scalable Tape Library 3583 should be considered

4 with its 1 to 6 IBM LTO Ultrium 2 Tape Drives and 18 to 72 cartridge capacity. For capacity requirements greater than 28.8 TB (compressed), the IBM TotalStorage UltraScalable Tape Library 3584 should be considered. The UltraScalable Tape Library 3584 can match system capacity and performance requirements from 28 TB to 1,376 TB (56 TB to 2,752 TB with 2:1 compression) using up to 192 IBM Ultrium tape drives in up to library frames. For capacity requirements less than 1.4 TB (compressed), the IBM TotalStorage Ultrium Tape Autoloader 3581 and the IBM TotalStorage Ultrium Tape Drive 3580 should be considered. For mission-critical data protection, consider the proven IBM TotalStorage Enterprise Tape Drive 3590 or the IBM TotalStorage Enterprise Automated Tape Library 3494 which are optimized for high-cycle and start/stop intensive tape applications and have enterprise multi-mode and host attachment. Trademarks The e-business logo, TotalStorage, iseries, pseries, SP, and EIA are trademarks of International Business Machines Corporation in the United States or other countries or both. Tivoli, xseries, AS/400, RS/6000, zseries, and Magstar are registered trademarks of International Business Machines Corporation in the United States or other countries or both. Microsoft is a trademark of Microsoft Corporation. Windows NT and Windows are registered trademarks of Microsoft Corporation. UNIX is a registered trademark of the Open Company in the United States and other countries. Other company, product, and service names may be trademarks or service marks of others

5 IBM US Announcement Supplemental Information September 9, 2003 Publications The following publications are shipped with the product. Title IBM TotalStorage Ultrium Tape Library 3582 Setup, Operator, and Service Guide IBM TotalStorage Ultrium Tape Library 3582 Quick Reference IBM Ultrium Device Driver Installation and User s Guide (English) Order number GA GX GA The publications listed above and the following publications are also available at the following Web site: Title IBM TotalStorage Ultrium Tape Library 3582 SCSI Reference (English) IBM Ultrium Device Driver Programming Reference (English) Order number GA GC The Publication Notification System (PNS) is available by order number or product number. Customers currently subscribing to PNS will automatically receive notifications by . Customers who wish to subscribe can visit the PNS Web site location at: messages/welcome The publications listed on the notification can be ordered by calling the Pubs Support Group in Raleigh at , option 1. The IBM Publications Center Portal: The Publications Center is a world-wide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided, as well as payment options via credit card. Furthermore, a large number of publications are available online in various file formats, which can currently be downloaded free of charge. Note that PNS subscribers most often order their publications via the Publication Center. Technical information Specified operating environment Physical specifications Width: 455 mm (17.9 in) Depth: 654 mm (25.8 in) Height: 194 mm (7.7 in) EIA EIA Units: 4 EIA units (if rack mounted) Weight: 30.3 kg (66.7 lb) with two drives To assure installability and serviceability in non-ibm industry standard racks, review the installation planning information for any product-specific installation requirements. Operating environment Temperature: 10 to 38 C (50 to 100 F) Relative Humidity: 20% to 80% Wet Bulb: 26 C (78.8 F) maximum Voltage: V ac, Hz auto-ranging Electrical Power: 2.6 amps (peak)/1.5 amps (RMS) at 100 V ac (maximum configuration) 1.0 amps (peak)/0.6 amps (RMS) at 240 V ac (maximum configuration) 0.26 kva Heat Output (calories per hour/watts): 81,685/95 (maximum configuration) Maximum Noise Level in Bels (operating/idle): 6.5/6.3 (maximum configuration) Hardware requirements Ultrium Tape Library 3582 Model L23 (part number 18P9212 LVD, part number 18P9337 Fibre) The Ultrium Tape Library 3582 Model L23 can be attached to the iseries, pseries, xseries, AS/400, RS/6000, Netfinity, zseries Linux, and non-ibm servers, workstations, and personal computers that support SCSI HVD, SCSI LVD, and Fibre Channel interfaces. The Ultrium Tape Library comes with raven black covers. The Ultrium Tape Library 3582 Model L23 comes standard for mounting in a standard 19-inch EIA equipment rack. The Ultrium Tape Library can be configured for stand-alone desktop operation by ordering the Stand-alone Kit option (part number 18P9237), which comes with raven black covers. This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: IBM United States IBM is a registered trademark of International Business Machines Corporation

6 The Ultrium Tape Library 3582 Model L23 contains a maximum of two IBM LTO Ultrium 2 Tape Drives. The IBM LTO Ultrium 2 Tape Drives come with an LVD SCSI Ultra160 Low Voltage Differential interface, or a Fibre Channel interface by ordering the following part numbers: 3582 Model L23 (LVD), part number 18P9212, which includes one IBM LTO Ultrium 2 Tape Drive with the LVD SCSI Ultra160 Low Voltage Differential interface 3582 Model L23 (Fibre), part number 18P9337, which includes one IBM LTO Ultrium 2 Tape Drive with an LC Fibre Channel interface Only two drives can be installed in a library. The following part numbers provide a second IBM LTO Ultrium 2 Tape Drive that is customer installed in the library: 18P9234, which includes one IBM LTO Ultrium 2 Tape Drive with the LVD SCSI Ultra160 Low Voltage Differential interface 18P9235, which includes one IBM LTO Ultrium 2 Tape Drive with the HVD Ultra/Wide SCSI High Voltage Differential interface 18P9236, which includes one IBM LTO Ultrium 2 Tape Drive with an LC Fibre Channel interface The Remote Management Unit/Specialist (part number 18P9239) provides a Web-based browser interface through the Remote Management Unit (RMU) Ethernet port for remote library management. The RMU supports all operator panel functions as well as the ability to download robotics and drive firmware, and also upload error and event log information. This is required when a Fibre Channel drive is installed. The appropriate power cord will be shipped based on country code. The Ultrium Tape Library 3582 Model L23 with the Ultrium 2 Tape Drive can be attached to the iseries, pseries, xseries, AS/400, RS/6000, RS/6000 SP systems, Netfinity, and non-ibm servers, workstations, and personal computers that support the above interface specifications. A current list of supported open system configurations is available from the following Web site: Select LTO Support, then the Interoperability Matrix and Software ISVs, and view the Supported Servers and Operating Systems for the product. Software requirements: The Ultrium Tape Library 3582 Model L23 is supported on the following operating systems at the minimum levels indicated: OS/400 V5R1, or later AIX V4.3.3, 5L V5.1, V5.2, or later Sun Solaris 7, 8, or 9 Microsoft Windows NT 4.0 with Service Pack 6 Microsoft Windows 2000 (build 2195, or greater) Microsoft Windows 2003 (build 3790, or greater) HP-UX and 11i (64-bit, PCI bus) Linux distributions: Red Hat Enterprise Linux 2.1, United Linux 1.0* * United Linux support includes the following distributions: SuSE Linux Enterprise Server 8 (SLES 8) Turbolinux Enterprise Server 8 (TLES 8) Connectiva Linux Enterprise Edition Powered by United Linux For a current list of host software versions and release levels that support the 3582 Model L23, refer to the following Web site: Select LTO Support, then the Interoperability Matrix and Software ISVs, and view the Supported Servers and Operating Systems for the product. Tivoli Storage Manager and other industry-leading compatible software offerings provides storage and tape management software for the 3582 Model L23. Supporting software and applications must be obtained separately from IBM, IBM Business Partners, or independent software vendors (ISVs). A list of compatible software is available from your IBM representative or at: Select LTO Support, then the Interoperability Matrix and Software ISVs, and view the Supported Storage Management Software for the product. IBM continues to work with ISVs to support the Ultrium Tape Library 3582 Model L23. Individual application vendors should be contacted for specific information and availability dates. Consult with ISV providers for their support of mixed drive types and media types in the same logical library. Compatibility: The IBM LTO Ultrium 2 Tape Drives can read and write original IBM LTO Ultrium Data Cartridges. The LTO Ultrium 200 GB Data Cartridges can only be used on the IBM LTO Ultrium 2 Tape Drives. However, IBM LTO Ultrium 2 Tape Drives and cartridges can be resident in the Ultrium Tape Library 3582 Model L23 with IBM LTO Ultrium 1 tape cartridges. Limitations: Although the compression technology can increase the amount of data stored on the media, the actual degree of compression achieved is highly sensitive to the characteristics of the data being compressed. Fibre Channel cable lengths are limited to 500 m (1650 ft). Total LVD SCSI cable length is limited to 25 m (81 ft) using point-to-point interconnection (for example, one host connected to only one tape drive). Total LVD SCSI cable length is 12 m (39 ft) using multi-drop interconnection (for example, one host connected to more than one tape drive on the same SCSI bus). Stub length at each device must not exceed 0.1 m (0.33 ft). Total HVD SCSI cable lengths are limited to 25 m (81 ft.) using point-to-point or multi-drop interconnection. Stub length at each device must not exceed 0.2 m (0.66 ft). Data transfer rates on the SCSI bus can be affected by the amount of IBM Ultrium Tape Drives attached to the bus. For optimal performance, it is recommended that no more than two IBM Ultrium Tape Drives be attached to an individual SCSI bus. Installing more than one IBM LTO Ultrium Tape Drive on a SCSI bus may impact system performance. Intermixing of other SCSI devices on the same SCSI bus as the Ultrium Tape Library 3582 Model L23 may impact performance of those devices. The Ultrium Tape Library 3582 Model L23 operating environment must not conflict with media operating and storage requirements. If media is stored in the Ultrium Tape Library 3582 Model L23 for more than ten hours the media storage temperature requirements must be met

7 Planning information Customer responsibilities: Physical planning is a customer responsibility. Detailed planning information is in the IBM TotalStorage Ultrium Tape Library 3582 Setup, Operator, and Service Guide (GA ). The Ultrium Tape Library 3582 Model L23 is designated as a customer setup unit (CSU). It is the customers responsibility to install the unit, including the Stand-alone Kit feature (#2200) or the Rack Mount Kit feature (#7003). Customers are responsible for obtaining the appropriate SCSI adapters, cables, and interposers (if required) for system attachment. Customers are also responsible for ordering media. For optimum performance, the customer must obtain the latest level of firmware prior to installing the unit. Customers can download the latest level of firmware from the LTO Web site: Cable orders: A SCSI cable or Fibre Channel cable is required to attach each tape drive in the 3582 Model L23 to the server adapter. A SCSI terminator is included with each SCSI Ultrium Tape Drive. Customers are responsible for selecting and ordering the correct cables to match the IBM LTO Ultrium interface and the server interface. The following SCSI cables can be ordered for the 3582 Model L23: Netfinity 2M Ultra2 SCSI Cable (part number 09K9310) Netfinity 42M Ultra2 SCSI Cable (part number 03K9311) Netfinity 20M Ultra2 SCSI Cable (part number 37L7101) 2 m External 0.8 mm SCSI Cable (part number 01K8027) The following Fibre Channel cables can be ordered for the 3582F23: 1 m LC-LC Fibre Channel Cable (part number 19K1247) 5 m LC-LC Fibre Channel Cable (part number 19K1248) 25 m LC-LC Fibre Channel Cable (part number 19K1249) LC-SC Fibre Channel Cable (part number 19K1250) Installability: Installation time for the Ultrium Tape Library 3582 Model L23 is approximately four hours. Installation time for an additional tape drive installed in the Ultrium Tape Library 3582 Model L23 is approximately one hour. Packaging Number Product Items included of boxes 3582L23 Ultrium 2 LVD Tape Library 3582 (18P9212) 1 Ultrium 2 LVD Tape Drive (minimum 1) Power cord Rack Mount Kit SCSI terminator with each SCSI drive ordered Wrap tool IBM TotalStorage LTO Ultrium 200 GB Data Cartridge IBM TotalStorage LTO Cleaning Cartridge Setup, Operator and Service Guide Quick Reference Card Warranty Information Open systems device drivers Device Driver Installation and User s Guide Additional 3582 Ultrium 2 LVD Tape Drive (18P9234) Additional 3582 Ultrium 2 HVD Tape Drive (18P9235) Additional 3582 Ultrium 2 Fibre Tape Drive (18P9236) 3582 Stand-alone Cover Kit (18P9237) 3582 Magazine Kit with Dust Cover (18P9238) 3582 Remote Management Unit (18P9239) Number Product Items included of boxes 3582L23 Ultrium 2 Fibre Tape Library 3582 (18P9337) 1 Ultrium 2 Fibre Tape Drive (minimum 1) Power cord Rack Mount Kit Wrap tool IBM TotalStorage LTO Ultrium 200 GB Data Cartridge IBM TotalStorage LTO Cleaning Cartridge Setup, Operator and Service Guide Quick Reference Card Warranty Information Open systems device drivers Device Driver Installation and User s Guide Additional 3582 Ultrium 2 LVD Tape Drive (18P9234) Additional 3582 Ultrium 2 HVD Tape Drive (18P9235) Additional 3582 Ultrium 2 Fibre Tape Drive (18P9236) 3582 Stand-alone Cover Kit (18P9237) 3582 Magazine Kit with Dust Cover (18P9238) 3582 Remote Management Unit (18P9239)

8 Supplies For end users The part numbers for additional supplies are: IBM part number 71P L L2086 Supply item IBM TotalStorage LTO Ultrium 200 GB Data Cartridge 20-Pack IBM TotalStorage LTO Ultrium 200 GB Data Cartridge 1-Cartridge IBM TotalStorage LTO Cleaning Cartridge 1-Cleaning Cartridge For information about IBM branded media, such as additional IBM LTO Ultrium data or cleaning cartridges, call 888-IBM-MEDIA ( ) in the U.S. or Canada or refer to the following Web site: Security, auditability, and control This product uses the security and auditability features of the host hardware, software, and application software. The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities. Terms and conditions This product is available for purchase under the terms of the IBM Customer Agreement. IBM hardware products are manufactured from new parts, or new and used parts. In some cases, the hardware product may have been previously installed. Regardless, IBM warranty terms apply. IBM Global Financing: Yes To obtain copies of the IBM Statement of Limited Warranty, contact your reseller or calling IBM. In the United States, call In Canada, call Warranty period: Three years. IBM Ultrium media warranted separately. Warranty service: If required, IBM provides repair or exchange service depending on the type of warranty service specified for your machine below. An IBM technician will attempt to resolve your problem over the telephone. You must follow IBM s problem determination and resolution procedures. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM s normal service area. Contact your local IBM representative or your reseller for country and location specific information. IBM Customer Replaceable Unit (CRU) service CRU: If your problem can be resolved with a CRU, IBM will ship the machine to you for replacement by you. If IBM instructs you to return the replaced CRU, you are responsible for returning it to IBM in accordance with IBM s instructions. If you do not return the defective CRU, if IBM so instructs, within 30 days of your receipt of the replacement CRU, IBM may charge you for the replacement. Licensing: Programs included with this product are licensed under the terms and conditions of the License Agreements that are shipped with the system. Maintenance services ServiceElect and ServiceSuite : ServiceElect and ServiceSuite provide hardware warranty service upgrades, maintenance, and selected annuity support services in one agreement. Warranty service upgrade: During the warranty period, warranty service upgrade provides an enhanced level of service for an additional charge. This enhanced level of service includes a higher level of on-site service labor during the original warranty period. The following warranty service upgrade options are available: IBM On-site Exchange (IOE), 9 hours a day, Monday through Friday excluding holidays, next business day IOE, 24 hours a day, 7 days a week, same day Maintenance service IOE, 9 hours a day, Monday through Friday excluding holidays, next business day IOE, 24 hours a day, 7 days a week, same day Maintenance service (ICA) Currently available maintenance services for ICA legacy contracts. The preferred go-to-market offerings are ServiceElect. However, ICA legacy contracts will still be available for current customers until they are withdrawn. Alternative service (warranty service upgrades): During the warranty period, warranty service upgrade provides an enhanced level of service for an additional charge. This enhanced level of service includes a higher level of on-site service labor during the original warranty period. The following warranty service upgrade options are available: IOE, 9 hours a day, Monday through Friday excluding holidays, next business day IOE, 24 hours a day, 7 days a week, same day Maintenance service IOE, 9 hours a day, Monday through Friday excluding holidays, next business day IOE, 24 hours a day, 7 days a week, same day Mid-range System Option: No Corporate Service Option: No Extended Maintenance Option: No Central Facility Maintenance Service (CFMS) Option: No

9 IBM hourly service rate classification: Two Field-installable features: Yes Model conversions: No Machine installation: Customer setup. Customers are responsible for installation according to the instructions IBM provides with the machine. Graduated charges: No. This product does not contain Licensed Internal Code or Licensed Machine Code. Educational allowance: A reduced charge is available to qualified education customers. The educational allowance may not be added to any other discount or allowance. Prices Product charges Machine Part IBM list Description type Model number price* Ultrium Tape Library 3582 with 3582 L23 18P9212 $13,599 Ultrium 2 LVD Tape Drive with US/CAN standard 110V power cord Ultrium Tape Library 3582 with 18P ,599 Ultrium 2 LVD Tape Drive with US/CAN 250V power cord Ultrium Tape Library 3582 with 18P ,599 Ultrium 2 LVD Tape Drive with Uruguay power cord 38L8880 Ultrium Tape Library 3582 with 18P ,599 Ultrium 2 LVD Tape Drive with Italy power cord 14F0069 Ultrium Tape Library 3582 with 3582 L23 18P ,799 Ultrium 2 Fibre Tape Drive US/CAN standard 110V power cord Ultrium Tape Library 3582 with 18P ,799 Ultrium 2 Fibre Tape Drive with US/CAN 250V power cord Ultrium Tape Library 3582 with 18P ,799 Ultrium 2 Fibre Tape Drive with Uruguay power cord 38L8880 Ultrium Tape Library 3582 with 18P ,799 Ultrium 2 Fibre Tape Drive with Italy power cord 14F0069 Options: Additional 3582 Ultrium 2 LVD 3582 L23 18P9234 7,956 Tape Drive Additional 3582 Ultrium 2 HVD 3582 L23 18P9235 8,364 Tape Drive Additional 3582 Ultrium 2 Fibre 3582 L23 18P9236 9,180 Tape Drive 3582 Stand-alone Cover Kit 3582 L23 18P Magazine Kit with Dust Cover 3582 L23 18P Remote Management Unit 3582 L23 18P * IBM list price does not include tax or shipping and is subject to change without notice. Reseller prices may vary

10 ServiceElect and ServiceSuite charges (IOR) SE&SS warranty service upgrades W95 W24 Machine on-site exch. on-site exch. type/model IOE, 9 x 5 IOE, 24 x L23 $1,725 $2,300 Maintenance service charges ServicePac for warranty and maintenance Machine ServicePac List type/model Description part number price 3582-L23 3-year IOE 9 x 5 96P2904 $1,725 Next Business Day average 3582-L23 3-year IOE 24 X 7 96P2905 2,300 4-hour average 3582-L23 5-year IOE 24 X 7 96P2906 5,058 4-hour average 3582-L23 1-year MA IOE 9 x 5 96P2907 1,587 Next Business Day average 3582-L23 2-year MA IOE 9 x 5 96P2908 3,015 Next Business Day average 3582-L23 1-year MA IOE 24 X 7 96P2909 2,222 4-hour average 3582-L23 2-year MA IOE 24 X 7 96P2910 4,222 4-hour average For ServiceElect (ESA) Maintenance Service Charges, contact IBM Global Services at 888-IBM-4343 ( ). Global Financing: IBM Global Financing offers competitive financing to credit-qualified customers to assist them in acquiring IT solutions. Our offerings include financing for IT acquisition, including hardware, software, and services, from both IBM and other manufacturers or vendors. Offerings (for all customer segments: small, medium, and large enterprise), rates, terms, and availability can vary by country. Contact your local IBM Global Financing organization or visit the Web at: Order now To order, contact the Americas Call Centers, your local IBM representative, or your IBM Business Partner. To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU ( ). Phone: 800-IBM-CALL ( ) Fax: 800-2IBM-FAX ( ) Internet: ibm direct@vnet.ibm.com Mail: The Americas Call Centers Dept. YE001 P.O. Box 2690 Atlanta, GA Reference: YE001 The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products. Note: Shipments will begin after the planned availability date

11 Trademarks TotalStorage, EIA, iseries, pseries, SP, and ServiceSuite are trademarks of International Business Machines Corporation in the United States or other countries or both. AS/400, Netfinity, RS/6000, xseries, zseries, OS/400, AIX, Tivoli, and ServicePac are registered trademarks of International Business Machines Corporation in the United States or other countries or both. Microsoft is a trademark of Microsoft Corporation. Windows NT and Windows are registered trademarks of Microsoft Corporation. Other company, product, and service names may be trademarks or service marks of others