RF WIREWOUND CHIP INDUCTORS
|
|
|
- Andra Felicity Quinn
- 5 years ago
- Views:
Transcription
1 RF WIREWOUND CHIP INDUCTORS These high frequency High-Q chip inductors feature a monolithic body made of low loss ceramic wound with wire to achieve optimal high frequency performance. These RF chip inductors are compact in size and are provided on tape and reel packaging which makes them ideal for high volume RF applications. They feature a nickel barrier with a top plating of gold for the ceramic core types (all 42, all 63, and most 85 types), and with a top plating of 1% tin for the ferrite core types (85 size, 47 nh and higher). Most inductance values between those listed are available on request. APPLICATIONS PRODUCT RANGE SUMMARY CELL/PCS Modules Broadband Components RF Tranceivers Cable Modem Bluetooth Wireless LAN RFID Cordless Phone Computer Peripherals ASDL EIA SIZE (mm) SIZE CODE L RANGE Q FACTOR (Typ.) SRF (Typ.) TEMPERATURE 42 (15) L nh 55 (9 MHz) >11 GHz (1. nh) -4 C to C 63 (168) L nh 6 (9 MHz) >13 GHz (2. nh) -4 C to C 85 (212) L , nh 6 (5 MHz) >11 GHz (2.2 nh) -4 C to C* MECHANICAL CHARACTERISTICS L W S T Length Width Thickness End Band 42 (15) Inches mm.39 ±.4 (1. ±.1).22 ±.4 (.55 ±.1).2 ±.4 (.5 ±.1).8 ±.4 (.2 ±.1) *-4 deg. C to +85 deg. C for ferrite core types 63 (168) Inches mm.63 ±.8 (1.6 ±.2).41 ±.8 (1.5 ±.2).41 ±.8 (1.5 ±.2).14 ±.4 (.35 ±.1) 85 (212) Inches mm.79 ±.8 (2. ±.2).49 ±.8 (1.25 ±.2).47 ±.8 (1.2 ±.2).16 ±.4 (.4 ±.1) HOW TO ORDER L- 7 W 4N3 S V 4 T DEVICE Inductor SIZE 7 = = = 85 TYPE W = Wirewound on Ceramic Core F = Wirewound on Ferrite Core VALUE See Table TOLERANCE* C = ±.2 nh S = ±.3 nh G = ± 2% J = ± 5% K = ± 1% TERMINATION V = Ni / Au for W types, and V = Ni / 1% Sn for F types Example : L-7W4N3SV4T is: 42 Wirewound, 4.3 nanohenry, +/-.3 nh tolerance, Ni / Au termination, No Marking, Paper tape on a 7 reel. * See selection chart on the following pages for available tolerances of each value. MARKING 4 = No Marking PACKAGING Tape and Reel Size Code Tape Reel Qty 42 T Paper 7 1, 63 E Embossed 7 3, 85 E Embossed 7 2, Bulk (Loose Pcs.) Size Code All S 22
2 RF WIREWOUND CHIP INDUCTOR SELECTION CHART Inductor Value EIA Size 42 (L-7) 63 (L-14) 85 (L-15) See web page for WireWound Inductor Product Detail Summary by part number Core Type CERAMIC CORE ( VV Type) EIA Size Inductor Value nh Code 42 (L-7) 63 (L-14) 85 (L-15) Core Type Tolerance Toler- Toler- nh Code Current ance Current ance Current 1. 1N C, S 136 ma 1.2 1N2 C, S 13 ma 1.6 1N6 C, S 7 ma 1.8 1N8 C, S 14 ma C, S 7 ma 1.9 1N9 C, S 14 ma 2. 2N C, S 14 ma C, S 7 ma 2.2 2N2 C, S 96 ma C, S 8 ma 2.4 2N4 C, S 79 ma 2.6 2N6 C, S 64 ma 2.7 2N7 C, S 64 ma C, S 8 ma 3.3 3N3 C, J, K 84 ma C, S 7 ma C, S 8 ma 3.6 3N6 C, J, K 84 ma C, S 7 ma 3.9 3N9 C, J, K 84 ma C, S 7 ma C, S 6 ma 4.3 4N3 C, J, K 7 ma C, S 7 ma 4.7 4N7 C, J, K 64 ma C, S 7 ma C, S 6 ma 5.1 5N1 C, J, K 8 ma C, J, K 7 ma 5.6 5N6 C, J, K 76 ma C, J, K 7 ma C, J, K 6 ma 6.2 6N2 C, J, K 76 ma 6.8 6N8 C, J, K 68 ma C, J, K 7 ma C, G J, K 6 ma 7.5 7N5 C, J, K 68 ma C, J, K 7 ma J, K 6 ma 8.2 8N2 C, J, K 68 ma C, J, K 7 ma C, G, J, K 6 ma 8.7 8N7 C, J, K 48 ma C, J, K 7 ma 9. 9N C, J, K 68 ma 9.5 9N5 C, J, K 68 ma C, J, K 7 ma 1 1N G, J, K 48 ma G, J, K 7 ma G, J, K 6 ma 11 11N G, J, K 64 ma G, J, K 7 ma 12 12N G, J, K 64 ma G, J, K 7 ma G, J, K 6 ma 13 13N G, J, K 56 ma J, K 6 ma 15 15N G, J, K 56 ma G, J, K 7 ma G, J, K 6 ma 16 16N G, J, K 56 ma G, J, K 7 ma G, J, K 6 ma 18 18N G, J, K 42 ma G, J, K 7 ma G, J, K 6 ma 19 19N G, J, K 48 ma 2 2N G, J, K 42 ma G, J, K 7 ma G, J, K 6 ma 22 22N G, J, K 4 ma G, J, K 7 ma G, J, K 6 ma 23 23N G, J, K 4 ma G, J, K 7 ma 24 24N G, J, K 4 ma G, J, K 7 ma J, K 6 ma 27 27N G, J, K 4 ma G, J, K 6 ma G, J, K 6 ma 3 3N G, J, K 4 ma G, J, K 7 ma 33 33N G, J, K 4 ma G, J, K 6 ma G, J, K 5 ma 36 36N G, J, K 32 ma J, K 6 ma 39 39N G, J, K 32 ma G, J, K 6 ma G, J, K 5 ma 4 4N G, J, K 32 ma 43 43N G, J, K 1 ma G, J, K 7 ma J, K 6 ma 47 47N G, J, K 1 ma G, J, K 6 ma G, J, K 5 ma 51 51N J, K 1 ma G, J, K 6 ma J, K 6 ma 56 56N J, K 1 ma G, J, K 6 ma G, J, K 5 ma 68 68N J, K 1 ma G, J, K 6 ma G, J, K 5 ma 72 72N G, J, K 4 ma 82 82N J, K 1 ma G, J, K 4 ma G, J, K 5 ma 1 R1 J, K 1 ma G, J, K 4 ma G, J, K 5 ma 11 R11 J, K 1 ma 12 R12 J, K 1 ma G, J, K 3 ma G, J, K 5 ma 15 R15 G, J, K 28 ma G, J, K 4 ma 18 R18 G, J, K 24 ma G, J, K 4 ma 22 R22 G, J, K 2 ma G, J, K 4 ma 27 R27 G, J, K 17 ma G, J, K 35 ma Tolerance Current Tolerance Current Tolerance Current 33 R33 J, K 15 ma G, J, K 3 ma Ceramic 39 R39 J, K 1 ma G, J, K 21 ma 47 R47 J, K 1 ma J, K 5 ma 56 R56 J, K 45 ma 68 R68 J, K 4 ma 82 R82 J, K 3 ma 1 1R J, K 18 ma 12 1R2 J, K 15 ma 15 1R5 J, K 13 ma 18 1R8 J, K 12 ma 22 2R2 J, K 11 ma 27 2R7 J, K 1 ma 33 3R3 J, K 21 ma 39 3R9 J, K 2 ma 47 4R7 J, K 18 ma 56 5R6 J, K 16 ma 68 6R8 J, K 13 ma 82 8R2 J, K 12 ma 1 1R J, K 8 ma Consult factory for Non-Standard values. FERRITE CORE ( F Type) 23
3 Q RF CHARACTERISTICS CHARACTERISTICS (TYPICAL) Q Q vs Frequency for 42 Size 2.2 nh 3.3 nh 5.6 nh 8.2 nh 15 nh 36 nh (nh) L vs Frequency for 42 Size 2.2 nh 3.3 nh 5.6 nh 8.2 nh 15 nh 36 nh Q Q vs Frequency for 63 Size 2. nh 1 nh 22 nh 1 nh 18 nh (nh) L vs Frequency for 63 Size 2.nH 1 nh 22 nh 1 nh 18 nh Q vs Frequency for 85 Size 2.7 nh 27.nH 1nH 27 nh 47 nh 68 nh 5 3 F M H r e q u e n c y ( z ) I n d u c t a n c e ( n H ) L vs Frequency for 85 Size nh 27.nH 12 1nH 27 nh 1 47 nh 68 nh F r e q u e n c y ( M H z ) 24
4 42 INDUCTANCE RANGE / ELECTRICAL 25MHz Availiable 25MHz Q 1.8GHz SRF (min.) DC Resistance Current L-7W1NSV4T 1. nh ±.2 nh, ±.3 nh GHz.45 Ω 136 ma L-7W1N2SV4T 1.2 nh ±.2 nh, ±.3 nh GHz.6 Ω 13 ma L-7W1N8SV4T 1.8 nh ±.2 nh, ±.3 nh GHz.7 Ω 14 ma L-7W1N9SV4T 1.9 nh ±.2 nh, ±.3 nh GHz.7 Ω 14 ma L-7W2NSV4T 2. nh ±.2 nh, ±.3 nh GHz.7 Ω 14 ma L-7W2N2SV4T 2.2 nh ±.2 nh, ±.3 nh GHz.7 Ω 96 ma L-7W2N4SV4T 2.4 nh ±.2 nh, ±.3 nh GHz.68 Ω 79 ma L-7W2N7SV4T 2.7 nh ±.2 nh, ±.3 nh GHz.12 Ω 64 ma L-7W3N3JV4T 3.3 nh ±.2 nh, ±5%, ±1% GHz.66 Ω 84 ma L-7W3N6JV4T 3.6 nh ±.2 nh, ±5%, ±1% GHz.66 Ω 84 ma L-7W3N9JV4T 3.9 nh ±.2 nh, ±5%, ±1% GHz.66 Ω 84 ma L-7W4N3JV4T 4.3 nh ±.2 nh, ±5%, ±1% GHz.91 Ω 7 ma L-7W4N7JV4T 4.7 nh ±.2 nh, ±5%, ±1% GHz.13 Ω 64 ma L-7W5N1JV4T 5.1 nh ±.2 nh, ±5%, ±1% GHz.83 Ω 8 ma L-7W5N6JV4T 5.6 nh ±.2 nh, ±5%, ±1% GHz.83 Ω 76 ma L-7W6N2JV4T 6.2 nh ±.2 nh, ±5%, ±1% GHz.83 Ω 76 ma L-7W6N8JV4T 6.8 nh ±.2 nh, ±5%, ±1% GHz.83 Ω 68 ma L-7W7N5JV4T 7.5 nh ±.2 nh, ±5%, ±1% GHz.14 Ω 68 ma L-7W8N2JV4T 8.2 nh ±.2 nh, ±5%, ±1% GHz.14 Ω 68 ma L-7W8N7JV4T 8.7 nh ±.2 nh, ±5%, ±1% GHz.2 Ω 48 ma L-7W9NJV4T 9. nh ±.2 nh, ±5%, ±1% GHz.14 Ω 68 ma L-7W9N5JV4T 9.5 nh ±.2 nh, ±5%, ±1% GHz.2 Ω 68 ma L-7W1NJV4T 1. nh ±2%, ±5%, ±1% GHz.195 Ω 48 ma L-7W11NJV4T 11. nh ±2%, ±5%, ±1% GHz.12 Ω 64 ma L-7W12NJV4T 12. nh ±2%, ±5%, ±1% GHz.12 Ω 64 ma L-7W13NJV4T 13. nh ±2%, ±5%, ±1% GHz.21 Ω 56 ma L-7W15NJV4T 15. nh ±2%, ±5%, ±1% GHz.172 Ω 56 ma L-7W16NJV4T 16. nh ±2%, ±5%, ±1% GHz.22 Ω 56 ma L-7W18NJV4T 18. nh ±2%, ±5%, ±1% GHz.23 Ω 42 ma L-7W19NJV4T 19. nh ±2%, ±5%, ±1% GHz.22 Ω 48 ma L-7W2NJV4T 2. nh ±2%, ±5%, ±1% GHz.25 Ω 42 ma L-7W22NJV4T 22. nh ±2%, ±5%, ±1% GHz.3 Ω 4 ma L-7W23NJV4T 23. nh ±2%, ±5%, ±1% GHz.214 Ω 4 ma L-7W24NJV4T 24. nh ±2%, ±5%, ±1% GHz.3 Ω 4 ma L-7W27NJV4T 27. nh ±2%, ±5%, ±1% GHz.298 Ω 4 ma L-7W3NJV4T 3. nh ±2%, ±5%, ±1% GHz.3 Ω 4 ma L-7W33NJV4T 33. nh ±2%, ±5%, ±1% GHz.35 Ω 4 ma L-7W36NJV4T 36. nh ±2%, ±5%, ±1% GHz.43 Ω 32 ma L-7W39NJV4T 39. nh ±2%, ±5%, ±1% GHz.55 Ω 32 ma L-7W4NJV4T 4. nh ±2%, ±5%, ±1% GHz.438 Ω 32 ma L-7W43NJV4T 43. nh ±2%, ±5%, ±1% GHz.81 Ω 1 ma L-7W47NJV4T 47. nh ±2%, ±5%, ±1% 22@2MHz GHz.83 Ω 1 ma L-7W51NJV4T 51. nh +/-5%, +/-1% 22@2MHz 49 N/A 1.7 GHz.82 Ω 1 ma L-7W56NJV4T 56. nh +/-5%, +/-1% 22@2MHz 49 N/A 1.7 GHz.97 Ω 1 ma L-7W68NJV4T 68. nh +/-5%, +/-1% 22@2MHz 42 N/A 1.6 GHz 1.12 Ω 1 ma 25
5 42 INDUCTANCE RANGE / ELECTRICAL CHARACTERISTICS 63 INDUCTANCE RANGE / ELECTRICAL L/Q Freq. Availiable 25MHz L/Q Test Freq. Q 25MHz Availiable L/Q 9MHz Q L/Q 1.8GHz SRF (min.) 26 DC Resistance Current L-14W1N6SV4E 1.6 nh 25 MHz ±.2 nh, ±.3 nh GHz.8 Ω 7 ma L-14W1N8SV4E 1.8 nh 25 MHz ±.2 nh, ±.3 nh GHz.8 Ω 7 ma L-14W2NSV4E 2. nh 25 MHz ±.2 nh, ±.3 nh GHz.8 Ω 7 ma L-14W3N3SV4E 3.3 nh 25 MHz ±.2 nh, ±.3 nh GHz.8 Ω 7 ma L-14W3N6SV4E 3.6 nh 25 MHz ±.2 nh, ±.3 nh 2 6. GHz.8 Ω 7 ma L-14W3N9SV4E 3.9 nh 25 MHz ±.2 nh, ±.3 nh GHz.8 Ω 7 ma L-14W4N3SV4E 4.3 nh 25 MHz ±.2 nh, ±.3 nh GHz.6 Ω 7 ma L-14W4N7SV4E 4.7 nh 25 MHz ±.2 nh, ±.3 nh GHz.11 Ω 7 ma L-14W5N1JV4E 5.1 nh 25 MHz ±.2 nh, ±5%, ±1% GHz.11 Ω 7 ma L-14W5N6JV4E 5.6 nh 25 MHz ±.2 nh, ±5%, ±1% GHz.11 Ω 7 ma L-14W6N8JV4E 6.8 nh 25 MHz ±.2 nh, ±5%, ±1% GHz.11 Ω 7 ma L-14W7R5JV4E 7.5 nh 25 MHz ±.2 nh, ±5%, ±1% GHz.11 Ω 7 ma L-14W8N2JV4E 8.2 nh 25 MHz ±.2 nh, ±5%, ±1% GHz.1 Ω 7 ma L-14W8N7JV4E 8.7 nh 25 MHz ±.2 nh, ±5%, ±1% GHz.12 Ω 7 ma L-14W1NJV4E 1. nh 25 MHz ±2%, ±5%, ±1% GHz.13 Ω 7 ma L-14W11NJV4E 11. nh 25 MHz ±2%, ±5%, ±1% GHz.86 Ω 7 ma L-14W12NJV4E 12. nh 25 MHz ±2%, ±5%, ±1% GHz.13 Ω 7 ma L-14W15NJV4E 15. nh 25 MHz ±2%, ±5%, ±1% GHz.17 Ω 7 ma L-14W18NJV4E 18. nh 25 MHz ±2%, ±5%, ±1% GHz.17 Ω 7 ma L-14W22NJV4E 22. nh 25 MHz ±2%, ±5%, ±1% GHz.22 Ω 7 ma L-14W27NJV4E 27. nh 25 MHz ±2%, ±5%, ±1% GHz.22 Ω 6 ma L-14W33NJV4E 33. nh 25 MHz ±2%, ±5%, ±1% GHz.22 Ω 6 ma L-14W39NJV4E 39. nh 25 MHz ±2%, ±5%, ±1% GHz.25 Ω 6 ma L-14W47NJV4E 47. nh 2 MHz ±2%, ±5%, ±1% 4 2. GHz.28 Ω 6 ma L-14W51NJV4E 51. nh 2 MHz ±2%, ±5%, ±1% GHz.3 Ω 6 ma L-14W56NJV4E 56. nh 2 MHz ±2%, ±5%, ±1% GHz.31 Ω 6 ma L-14W68NJV4E 68. nh 2 MHz ±2%, ±5%, ±1% GHz.34 Ω 6 ma L-14W72NJV4E 72. nh 15 MHz ±2%, ±5%, ±1% GHz.49 Ω 4 ma L-14W82NJV4E 82. nh 15 MHz ±2%, ±5%, ±1% GHz.54 Ω 4 ma L-14WR1JV4E 1. nh 15 MHz ±2%, ±5%, ±1% GHz.63 Ω 4 ma L-14WR12JV4E 12. nh 15 MHz ±2%, ±5%, ±1% GHz.65 Ω 3 ma L-14WR15JV4E 15. nh 15 MHz ±2%, ±5%, ±1% GHz.92 Ω 28 ma L-14WR18JV4E 18. nh 1 MHz ±2%, ±5%, ±1% 3 1. GHz 1.25 Ω 24 ma L-14WR22JV4E 22. nh 1 MHz ±2%, ±5%, ±1% 3 1. GHz 1.7 Ω 2 ma L-14WR27JV4E 27. nh 1 MHz ±2%, ±5%, ±1% 3 1. GHz 1.8 Ω 17 ma L-14WR33JV4E 33. nh 1 MHz ±5%, ±1% 25 9 MHz 3.6 Ω 15 ma L-14WR39JV4E 39. nh 1 MHz ±5%, ±1% MHz 5.3 Ω 1 ma L-14WR47JV4E 47. nh 1 MHz ±5%, ±1% 23 7 MHz 5.6 Ω 1 ma SRF (min.) DC Resistance Current L-7W82NJV4T 82. nh +/-5%, +/-1% 16@15 MHz 39 N/A 1.5 GHz 1.25 Ω 1 ma L-7WR1JV4T 1. nh +/-5%, +/-1% 16@15 MHz 36 N/A 1.3 GHz 2.52 Ω 1 ma L-7WR11JV4T 11. nh +/-5%, +/-1% 14@15 MHz 35 N/A 1.2 GHz 2.66 Ω 1 ma L-7WR12JV4T 12. nh +/-5%, +/-1% 14@15 MHz 35 N/A 1.1 GHz 2.66 Ω 1 ma
6 85 INDUCTANCE RANGE / ELECTRICAL CHARACTERISTICS L Test Availiable Tolerances Q (min.) Q Test DC Resistance L Test SRF (min.) L Test Q Test Freq. Freq. Freq. L-15W2N2SV4E 2.2 nh 25 MHz ±.2 nh, ±.3 nh 5 1 MHz >6 MHz.6 Ω 8 ma L-15W2N7SV4E 2.7 nh 25 MHz ±.2 nh, ±.3 nh 3 1 MHz >6 MHz.8 Ω 8 ma L-15W3N3SV4E 3.3 nh 25 MHz ±.2 nh, ±.3 nh 6 1 MHz >6 MHz.8 Ω 8 ma L-15W3N9SV4E 3.9 nh 25 MHz ±.2 nh, ±.3 nh 6 1 MHz >6 MHz.6 Ω 6 ma L-15W4N7SV4E 4.7 nh 25 MHz ±.2 nh, ±.3 nh 6 1 MHz 58 MHz.6 Ω 6 ma L-15W5N6SV4E 5.6 nh 25 MHz ±.2 nh, ±5%, ±1% 6 1 MHz 58 MHz.8 Ω 6 ma L-15W6N8SV4E 6.8 nh 25 MHz ±.2 nh, ±5%, ±1% 6 1 MHz 55 MHz.6 Ω 6 ma L-15W8N2SV4E 8.2 nh 25 MHz ±.2 nh, ±5%, ±1% 6 1 MHz 55 MHzz.6 Ω 6 ma L-15W1NJV4E 1. nh 25 MHz ±2%, ±5%, ±1% 6 5 MHz 48 MHz.8 Ω 6 ma L-15W12NJV4E 12. nh 25 MHz ±2%, ±5%, ±1% 6 5 MHz 41 MHz.8 Ω 6 ma L-15W15NJV4E 15. nh 25 MHz ±2%, ±5%, ±1% 6 5 MHz 36 MHz.8 Ω 6 ma L-15W16NJV4E 16. nh 25 MHz ±2%, ±5%, ±1% 6 5 MHz 35 MHz.8 Ω 6 ma L-15W18NJV4E 18. nh 25 MHz ±2%, ±5%, ±1% 6 5 MHz 34 MHz.8 Ω 6 ma L-15W2NJV4E 2. nh 25 MHz ±2%, ±5%, ±1% 6 5 MHz 34 MHz.8 Ω 6 ma L-15W22NJV4E 22. nh 25 MHz ±2%, ±5%, ±1% 6 5 MHz 33 MHz.1 Ω 6 ma L-15W27NJV4E 27. nh 25 MHz ±2%, ±5%, ±1% 6 5 MHz 26 MHz.12 Ω 6 ma L-15W33NJV4E 33. nh 25 MHz ±2%, ±5%, ±1% 6 5 MHz 24 MHz.15 Ω 5 ma L-15W39NJV4E 39. nh 25 MHz ±2%, ±5%, ±1% 6 5 MHz 21 MHz.18 Ω 5 ma L-15W47NJV4E 47. nh 2 MHz ±2%, ±5%, ±1% 6 5 MHz 17 MHz.15 Ω 5 ma L-15W56NJV4E 56. nh 2 MHz ±2%, ±5%, ±1% 6 5 MHz 16 MHz.25 Ω 5 ma L-15W68NJV4E 68. nh 15 MHz ±2%, ±5%, ±1% 6 5 MHz 145 MHz.27 Ω 5 ma L-15W82NJV4E 82. nh 15 MHz ±2%, ±5%, ±1% 6 5 MHz 135 MHz.32 Ω 5 ma L-15WR1JV4E 1 nh 1 MHz ±2%, ±5%, ±1% MHz 12 MHz.43 Ω 5 ma L-15WR12JV4E 12 nh 1 MHz ±2%, ±5%, ±1% 5 25 MHz 11 MHz.48 Ω 5 ma L-15WR15JV4E 15 nh 1 MHz ±2%, ±5%, ±1% 5 25 MHz 95 MHz.56 Ω 4 ma L-15WR18JV4E 18 nh 1 MHz ±2%, ±5%, ±1% 5 25 MHz 9 MHz.78 Ω 4 ma L-15WR22JV4E 22 nh 1 MHz ±2%, ±5%, ±1% 5 25 MHz 86 MHz 1. Ω 4 ma L-15WR27JV4E 27 nh 1 MHz ±2%, ±5%, ±1% MHz 85 MHz 1.46 Ω 35 ma L-15WR33JV4E 33 nh 25 MHz ±2%, ±5%, ±1% MHz 8 MHz 1.65 Ω 3 ma L-15WR39JV4E 39 nh 25 MHz ±2%, ±5%, ±1% MHz 78 MHz 2.2 Ω 21 ma L-15FR47JV4E 47 nh 25 MHz ±5%, ±1% 45 1 MHz 375 MHz.95 Ω 5 ma L-15FR56JV4E 56 nh 25 MHz ±5%, ±1% 45 1 MHz 34 MHz 1.1 Ω 45 ma L-15FR68JV4E 68 nh 25 MHz ±5%, ±1% 35 1 MHz 188 MHz 1.2 Ω 4 ma L-15FR82JV4E 82 nh 8 MHz ±5%, ±1% 35 1 MHz 21 MHz 1.5 Ω 3 ma L-15F1RJV4E 1 nh 8 MHz ±5%, ±1% 35 5 MHz 2 MHz 2.13 Ω 18 ma L-15F1R2JV4E 12 nh 8 MHz ±5%, ±1% 15 8 MHz 2 MHz 2.38 Ω 15 ma L-15F1R5JV4E 15 nh 8 MHz ±5%, ±1% 15 8 MHz 2 MHz 2.9 Ω 13 ma L-15F1R8JV4E 18 nh 8 MHz ±5%, ±1% 15 8 MHz 12 MHz 3. Ω 12 ma L-15F2R2JV4E 22 nh 8 MHz ±5%, ±1% 15 8 MHz 11 MHz 3.1 Ω 11 ma L-15F2R7JV4E 27 nh 8 MHz ±5%, ±1% 15 8 MHz 1 MHz 3.5 Ω 1 ma L-15F3R3JV4E 33 nh 8 MHz ±5%, ±1% 15 8 MHz 7 MHz 2.3 Ω 21 ma L-15F3R9JV4E 39 nh 8 MHz ±5%, ±1% 15 8 MHz 6 MHz 2.5 Ω 2 ma L-15F4R7JV4E 47 nh 8 MHz ±5%, ±1% 15 8 MHz 5 MHz 2.8 Ω 18 ma L-15F5R6JV4E 56 nh 8 MHz ±5%, ±1% 15 8 MHz 45 MHz 3. Ω 16 ma L-15F6R8JV4E 68 nh 8 MHz ±5%, ±1% 15 8 MHz 45 MHz 3.2 Ω 13 ma L-15F8R2JV4E 82 nh 8 MHz ±5%, ±1% 15 8 MHz 4 MHz 3.5 Ω 12 ma L-15F1RJV4E 1 nh 8 MHz ±5%, ±1% 1 8 MHz 4 MHz 5. Ω 8 ma 27
Air Core RF Inductors
GENERAL DESCRIPTION AVX Air Core RF Inductors, part of the wound air core inductor family, are ideal for RF circuits, broadband I/O filtering, frequency selection, or impedance matching. The air core inductor
Wirewound Chip Inductors
FEATURES CERAMIC BODY, WIRE WOUND CHIP INDUCTOR SIZES K (0402) HIGH CURRENT AND LOW DCR *See Part Number System for Details REFLOW SOLDERING APPLICABLE TAPE & REEL PACKAGING FOR AUTOMATIC PICK-PLACE Specifications
Shielded Power Inductors High Inductance
Document 1244-1 Shielded Power Inductors High Inductance High inductance values (22 47 µh) not available in the corresponding LPS series of parts Rugged construction improves pick and place operation Core
RF Chip Inductors WC701.I (11/04)
Wire-Wound - 42, 63, 85, 18, 126, 121 & 1812 RF Chip Inductors WC71.I (11/4) WIRE-WOUND RF CHIP INDUCTORS Pulse is one of the largest magnetic component design and manufacturing companies in the world.
YAGEO CORPORATION SMD INDUCTOR / BEADS. Power supply, power amplifiers Switching regulators. Features
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors STD0804 Series Yageo SMD power inductors are best designed for noise / EMI / RFI filters for surface mounting applications. These components contain
Atom FBM GENERAL S SERIES. Specification CHIP FERRITE BEAD MULTILAYER TYPE. Part No. InduSTance 1. Percent RDC 2 IDC Tolerance Max Max
CHIP FERRITE BEAD MULTILAYER TYPE FBM GENERAL S SERIES Specification Part No. InduSTance 1 Percent RDC 2 IDC Tolerance Max Max (MA) FBM 0402 ST 060 S 6 @ 100 MHZ S 0.05 500 FBM 0402 ST 100 S 10 @ 100 MHZ
X2Y - series Surface-mount ceramic EMI filter
DISCRETE CERAMICS X2Y series Surface mount component June 2002 Rev 6 X2Y - series 2002 July 26 v1.07 www.yageo.com X2Y Series Table of Contents 1. Introduction, Benefits, Applications 2. Available Capacitances
COMPETITIVE CROSS REFERENCE PART NUMBER ORDERING GUIDE
Miniature, Wirewound Components Pulse s popular RF chip inductors provide high-quality filtering in mobile phones, wireless applications, digital cameras, disk drives and audio equipment. The inductors
User Selectable Up to Two Frequencies LVDS, LVPECL OR CMOS. 6 Pad Standard Package
MVQI Series 5X7 Ceramic SMD VCXO User Selectable Up to Two Frequencies LVDS, LVPECL OR CMOS 6 Pad Standard Package OneClock Range CMOS Range LVDS & LVPECL Temperature Stability* Operating Temperature Range
ITEM : EMI_ESD FILTER APPROVAL SHEET ARRAY TYPE EMI_ESD FILTER CUSTOMER : DATE :
ITEM : EMI_ESD FILTER ESTABLISHMENT 26. 2. 6 APPROVED REVISION 26. 7. 19 Series NO:FLE67191 APPROVAL SHEET ARRAY TYPE EMI_ESD FILTER CUSTOMER : DATE : You can reapprove only the changed quality request
C Max. E F G. Unit. How to Order. SEI Type Dimensions Inductance Tolerance Inductance Current Packaging
These revolutionary, highly reliable wound chip inductors for automatic mounting, have been developed in response to the trend toward high density in electronic equipment. With metal terminals and a body
MULTILAYER CERAMIC CHIP INDUCTORS
INTRODUCTION Multilayer inductor HBL series made of advanced ceramics and low resistance silver conductors provides excellent Q and SRF characteristics. HBLS 列 料, 數 率 FEATURES 1.Supports operating frequency
How to Order CB 03 Y T Y N 601
(General Use) Features Standard type used to suppress lower-frequency, lower current signals. Impedance over a broad frequency range. Suitable for flow and reflow soldering Available in 8 sizes. Applications
Multi-Layer Ferrite Chip Beads
Multi-Layer Ferrite Chip Beads ORDERING CODE... 1 External Dimensions... 2 Beads For Signal Lines(BF series)... 3 Beads For Power Lines (BP series)... 8 Beads For High Speed Signal Lines (BH series)...
Data Sheet 6GX. MGA MHz MHz Flat Gain High Linearity Gain Block. Features. Description. Specifications. Applications.
MGA-30689 40MHz - 3000MHz Flat Gain High Linearity Gain Block Data Sheet Description Avago Technologies MGA-30689 is a flat gain, high linearity, low noise, 22dBm Gain Block with good OIP3 achieved through
EM8D-100L EMI FILTER/TVS ARRAY DESCRIPTION DFN-16 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS CIRCUIT DIAGRAM & PIN CONFIGURATION
EMI FILTER/TVS ARRAY DESCRIPTION The is a DFN-16, 8 line low pass filter array with integrated TVS diodes. The is designed to suppress unwanted EMI/RFI signals and provide ESD protection for high-speed
ELECTRICAL SPECIFICATIONS** Frequency. Power Handling. Directivity. .064±.013 [1.64±0.33] Pin ±.004 [3.05±0.10] Pin 3
![ELECTRICAL SPECIFICATIONS** Frequency. Power Handling. Directivity. .064±.013 [1.64±0.33] Pin ±.004 [3.05±0.10] Pin 3](/thumbs/89/100344529.jpg "ELECTRICAL SPECIFICATIONS** Frequency. Power Handling. Directivity. .064±.013 [1.64±0.33] Pin ±.004 [3.05±0.10] Pin 3")
Pico Xinger 20dB Directional Coupler Description The 1P620 Pico Xinger is a low profile, miniature 20dB directional coupler in an easy to use surface mount package designed for MMDS and WLAN applications.
MPS4101-6LP Datasheet 50 MHz 25 GHz RoHS-Compliant Control Device QFN SPST PIN
MPS4101-6LP Datasheet 50 MHz 25 GHz RoHS-Compliant Control Device QFN SPST PIN Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA:
Product Datasheet Revision: April 2014
ALP8 8 GHz Product Datasheet Revision: April 1 Applications W-Band Imaging Sensors Radar X =.mm Y =.8mm Product Features RF frequency: 8 GHz Broadband Operation Linear gain: 9 db, typical Noise Figure:
SRR1210A Series - Shielded Power Inductors
*RoHS COMPLIANT & AEC-Q QUALIFIED Features Shielded construction Inductance range: to μh Heating current up to 11 A Dimensions: 12 x 12 x 10 mm AEC-Q qualified RoHS compliant* and halogen free** SRR1210A
APPLICATIONS Computers and peripheral equipment Consumer products High speed circuits Suitable for circuits with unstable ground PART NUMBERING SYSTEM
The ferrite beads have been developed to pass signal frequencies from 1MHz to 1MHz while exhibiting high impedance characteristics to reduce EMI noise above these specific frequencies. FEATURES Designed
EMIFILr (Inductor type) Chip Ferrite Bead
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead EMIFILr (Inductor type) Chip Ferrite Bead BLM21A Series (85 Size) 1 c Dimensions c Equivalent Circuit.5±.2.85±.2
6 Channel EMI Filter Array with ESD Protection
6 Channel EMI Filter Array with ESD Protection Features Six channels of EMI filtering for data ports Pi-style EMI filters in a capacitor-resistor-capacitor (C-R-C) network Greater than 32dB attenuation
CR0603/CR0805/CR Chip Resistors
*RoHS COMPLIANT Features RoHS compliant* Power rating at 70 C: CR0603-0.10 W, CR0805-0.125 W, CR1206-0.25 W Tight tolerances of bottom electrode width Suitable for all types of soldering processes Three
Multi-Layer Ferrite Chip Beads
Multi-Layer Ferrite Chip Beads ODEING CODE BH 15 3 T T S 5 PODUCT CODE BF : For General Signal Lines BP : For Power Lines BH : For High Speed Signal Lines (1MHz~) BS : For Higher Speed Signal Lines (5MHz~)
Transient Voltage Suppressor. Operating Temperature : -55 to Storage Temperature : -55 to + 150
Operating Temperature : -55 to + 125 Storage Temperature : -55 to + 150 Packaging Method : Tape & Reel(per Specifications) Features: Full compliance on : IEC 61000-4-2 (ESD) ±15kV (air) ± 8kV (contact)
66 Toroid Series. Laird Technologies Web site: Features
66 Toroid Series Features Highest saturation flux density (Bs) and excellent DC bias handling capability in the industry Avaliable in wide range of size selection Designed for extended operating temerature
ELECTRICAL SPECIFICATIONS**
ico Xinger 1dB Directional Coupler Description The 161 ico Xinger is a low profile, miniature 1dB directional coupler in an easy to use surface mount package designed for MMDS and WLAN applications. The
ML Varistor Series. Surface Mount Varistors
Pb The ML Series family of Transient Voltage Surge Suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress a variety of transient events,
Monolithic Amplifier CMA-545G1+ Low Noise, High IP to 2.2 GHz. The Big Deal
Low Noise, High IP3 Monolithic Amplifier 50Ω The Big Deal 0.4 to 2.2 GHz Ceramic, Hermetically Sealed, Nitrogen filled Low profile case,.045 high High Gain, 31.5 db Low Noise Figure, 1.0 db High IP3, 35-37
MHz BAW Filter
Applications S-Band For high-selectivity applications Product Features Usable bandwidth 30 MHz Low loss High selectivity Single-ended operation Ceramic chip-scale Package (CSP) Small Size Hermetic RoHS
SSL0618 Series. SMD Power Inductors. Description
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SSL0618 Series For SSL series provide excellent current carrying capabilities in a small footprint. They have a flat top for reliable pick and
Typical Performance 1. 2 OIP3 _ measured with two tones at an output of 0 dbm per tone separated by 1 MHz. RFout
Device Features 3 ~ 3.3V supply No Dropping Resistor Required No matching circuit needed Lead-free/Green/RoHS compliant SOT-343 package Product Description BeRex s BGS6 is a high SiGe HBT MMIC amplifier,
ML Varistor Series. Surface Mount Varistors. Features. Size Metric EIA
The ML Series family of Transient Voltage Surge Suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress a variety of transient events,
LCD and Camera EMI Filter Array with ESD Protection
LCD and Camera EMI Filter Array with ESD Protection Features Six and eight channels of EMI filtering with integrated ESD protection 0.4mm pitch, 15-bump, 2.360mm x 1.053mm footprint Chip Scale Package
Low Current, High Performance NPN Silicon Bipolar Transistor. Technical Data AT AT-32033
Low Current, High Performance NPN Silicon Bipolar Transistor Technical Data AT-311 AT-333 Features High Performance Bipolar Transistor Optimized for Low Current, Low Voltage Operation 9 MHz Performance:
Power Splitter/Combiner 2 Way-90 50Ω 5 to 11 GHz
MMIC Surface Mount Power Splitter/Combiner 2 Way-90 50Ω 5 to 11 GHz The Big Deal Wideband (5-11 GHz) Good Isolation and Return Loss Highly repeatable performance (GaAs based design) No external termination
SYFER PRODUCT CHIP SIZE DIELECTRIC CAP RANGE Y2/X1** 1808 C0G/NP0 C0G/NP0 X7R. 1nF 1812 C0G/NP0 C0G/NP0 X7R X7R
Rheinland Safety & Surge Protection Certification Chart SAFETY CLASSIFICATION SYFER PRODUCT CHIP SIZE DIELECTRIC CAP RANGE APPROVAL ECIFICATION APPROVAL BODY CERTIFICATE NUMBER FLEXICAP TM OPTION ( only)
SECTION 1 IMP / UMP R107
1 SECTION 1 / UMP R107 Contents Introduction... 1-4 to 1-6 Characteristics...1-7 Board to board connectors...1-8 Receptacle packaging...1-9 Assembly instructions... 1-9 to 1-10 UMP Characteristics...1-11
INPAQ. Specification. MCB0603 Series. Product Name Chip Ferrite Bead Series MCB 0603 Size EIAJ Global RF/Component Solutions
MCB0603 Series Specification Product Name Chip Ferrite Bead Series MCB 0603 Size EIAJ 0603 Chip Ferrite Bead (MCB0603 Series) Engineering Spec. 1.Features Monolithic inorganic material construction. Closed
INPAQ. Specification. MCB0603 Series. Product Name Chip Ferrite Bead Series MCB 0603 Size EIAJ Global RF/Component Solutions
MCB0603 Series Specification Product Name Chip Ferrite Bead Series MCB 0603 Size EIAJ 0603 Chip Ferrite Bead (MCB0603 Series) Engineering Spec. Monolithic inorganic material construction. Closed magnetic
ELECTRICAL SPECIFICATIONS**
REV A Hybrid Couplers 3 db, 90 Description The 1P503AS Pico Xinger is a low profile, high performance 3dB hybrid coupler in an easy to use manufacturing friendly surface mount package. It is designed for
ESD4-DFN LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
LOW CAPACITANCE TVS ARRAY Description The is a multi-line, low capacitance, 7pF @ 2.5V bias transient voltage suppressor array. This device is designed to protect applications such as wireless telecommunication
Chip EMIFILr Inductor Type for GHz Noise Chip Ferrite Beads
1 Chip EMIFILr Inductor Type for GHz Noise Chip Ferrite Beads BLM18H Series (63 Size) Dimension Equivalent Circuit.4±.2.8±.15 1.6±.15.8±.15 (esistance element becomes dominant at high frequencies.) (in
Impedance (Ω) at DC Resistance
Type BMB-A Series Key Features Effective EMI Protection Wide Frequency Characteristics High soldering Heat Resistance Various Package Sizes Available Suited to a Variety of Applications Terminal finish
ML Varistor Series. Surface Mount Varistors
The ML Series family of Transient Voltage Surge Suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress a variety of transient events,
EMIFILr (Inductor type) Chip Ferrite Bead for GHz Noise
EMIFILr (Inductor type) Chip Ferrite Bead for GHz Noise BLM18H Series (63 Size) 1 c Dimensions c Equivalent Circuit.4±.2.8±.15 1.6±.15.8±.15 (esistance element becomes dominant at high frequencies.) :
for Bluetooth/Wimax Application
ANTENNA PRODUCTS Sept., 2008 V8 Tommy Chen Page 1 sheet 190-1 A4 for Bluetooth/Wimax Application Quick Reference Data Centre Frequency Bandwidth VSWR Polarization Azimuth Beamwidth Peak Gain Impedance
PLR0521E ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION DFN-2 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The is an ultra low capacitance transient voltage suppressor array, designed to protect computing applications from the damaging effects of Electrostatic Discharge
Control Devices Surface Mount Input-Limiting Diode Element
GC4212-6LP Datasheet Control Devices Surface Mount Input-Limiting Diode Element Released December 2017 Contents 1 Revision History... 1 1.1 Revision 1.0... 1 2 Product Overview... 2 2.1 Applications...
GBLC03 - GBLC24C. Ethernet 10/100/1000 Base T SMART Phones Handheld - Wireless Systems USB Interface
ultra LOW CAPACITANCE TVS ARRAY Description The GBLCxx and GBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and
Gain Equalizers EQY-SERIES. Microwave. The Big Deal
Microwave Gain Equalizers 50Ω DC to 6 GHz EQY-SERIES The Big Deal Excellent Return Loss, 20dB typ. Wide bandwidth, DC - 6 GHz Small Size, 2 mm x 2 mm CASE STYLE: MC1631-1 Product Overview EQY series of
Chip EMIFILr Inductor Type Chip Ferrite Beads
1 Chip EMIFILr Inductor Type Chip Ferrite Beads BLM18B Series (63 Size) Dimension Equivalent Circuit.4±.2.8±.15 1.6±.15.8±.15 (esistance element becomes dominant at high frequencies.) (in mm) Packaging
USB208. ultra low capacitance steering diode array. Description. applications
ultra low capacitance steering diode array Description The is an ultra low capacitance steering diode array. This device provides circuit protection for computer interfaces, wireless bus applications and
Product Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
PSM WATT TVS ARRAY - ASYMMETRICAL DATA LINE PROTECTOR PIN CONFIGURATION
600 WATT TVS ARRAY - ASYMMETRICAL DATA LINE PROTECTOR Description The is an asymmetrical transient voltage suppressor (TVS) array, designed specifically for RS-485 applications. This device provides protection
CDMSP M Surface Mount TVS Diode Array
*RoHS COMPLIANT Features RoHS compliant* Protects four I/O lines Ultra-low capacitance ~.55 pf ESD protection > kv Surge protection Applications High Definition Multimedia Interface (HDMI) Digital Visual
Enables prolonged battery life. Saves DC power consumption when it is not reguired.
Ultra Low Noise, Low Current, Shutdown Monolithic Amplifier 50Ω 10 to 13 GHz The Big Deal Ultra-low noise figure, 1.3 db Low Current, 13 ma at 3V and 29mA at 5V Excellent ESD protection, Class 1C Small
GHz db Min db Max Max: Phase Balance. .053±.011 [1.35±0.27] Pin ±.004 [3.05±0.10] Pin 3
![GHz db Min db Max Max: Phase Balance. .053±.011 [1.35±0.27] Pin ±.004 [3.05±0.10] Pin 3](/thumbs/81/84156060.jpg "GHz db Min db Max Max: Phase Balance. .053±.011 [1.35±0.27] Pin ±.004 [3.05±0.10] Pin 3")
` Model 1P603S Hybrid Coupler 3 db, 90 Features: 2.3 2.7 GHz. W-LAN and MMDS Low Loss High Isolation 90 o Quadrature Surface Mountable Tape And Reel Available in Lead-Free (as illustrated) or Tin- Lead
2 Channel Headset EMI Filter with ESD Protection
2 Channel Headset EMI Filter with ESD Protection Features Two channels of EMI filtering, one for a microphone and one for an earpiece speaker Pi-style EMI filters in a capacitor-resistor-capacitor (C-R-C)
PLR ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SC-89 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance (0.7pF Max. I/O to I/O) steering diode and TVS array combo. This device provides circuit protection for interfaces
Fine-Coax Wire Connector for Portable Devices. FI-JH Series
COMPONENTS PRODUCT INFORMATION NEW Fine-Coax Wire Connector for Portable Devices FI-JH CONNECTOR MB-0179-1 November 2007 RoHS Compliant In addition to incorporating new functions such as one
Glass Ceramic ESD Suppressor
Glass Ceramic ESD Suppressor Ideal ESD Suppressor for Ultra High Speed Lines 2014.2 1/19 Contents Development Background Electrical Characteristics Application in Circuit IC Module Mobile RF Antenna TV/STB
Used to help achieve electromagnetic compliance of end products Replace larger surface mount TVS Zeners in many applications.
RoHS Description The ML Series family of transient voltage surge suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress a variety of
PLC497 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. Designed for protection against Electrostatic Discharge (ESD), Electrical Fast Transients
G IP3=38. P1dB= Single. Units
Product Description SG0 SG0 is a high performance InGaP HBT amplifier utilizing a Darlington configuration with an active bias network. The active bias network provides stable current over temperature
CP05 - CP24C MULTI-LINE TVS ARRAY PIN CONFIGURATIONS
MULTI-LINE TVS ARRAY Description The CPxx and CPxxC series are subminiature monolithic TVS suppressor arrays designed for the protection of sensitive IC components from the damaging effects of Electrostatic
0.5mm Pitch FPC Connector. FA10 Series
COMPONENTS PRODUCT INFORMATION NEW 0.5mm Pitch FPC Connector FA10 Series CONNECTOR MB-0255-2 April 2016 RoHS Compliant The FA10 Series is a 0.5mm pitch, top and bottom-surface connection type, one-action
PESD2CAN CAN BUS ESD PROTECTION DIODE DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
CAN BUS ESD PROTECTION DIODE DESCRIPTION The is designed to protect Controller Area Network (CAN) bus lines and other industrial applications such as DeviceNet Bus lines from the damaging effects of Electrostatic
Monolithic Amplifier CMA-252LN+ Ultra Low Noise, High IP to 2.5 GHz. The Big Deal
Ultra Low, High IP3 Monolithic Amplifier 50Ω The Big Deal 1.5 to 2.5 GHz Ceramic, Hermetically Sealed, Nitrogen filled Low profile case,.045 high Ultra Low High Gain, High IP3 Class 1B HBM ESD (500V) CASE
Typical Performance 1. IS-95C ACPR dbm WCDMA ACLR dbm
Device Features OIP3 = 49.0 dbm @ 1900 MHz Gain = 12.5 db @ 1900 MHz Output P1 db = 30.3 dbm @ 1900 MHz 50 Ω Cascadable Patented Over Voltage Protection Circuit Lead-free/RoHS-compliant SOIC-8 package
Thin Wire Coaxial Connector for Small Portable Devices CONNECTOR. FI-J Series
COMPONENTS PRODUCT INFORMATION NEW Thin Wire Coaxial Connector for Small Portable Devices CONNECTOR MB-0143-1 FI-J November 2005 Outline Thin wire coaxial connector compatible to AWG #42, 44 cables for
RSB6.8S LOW CAPACITANCE TVS ARRAY DESCRIPTION SC-79 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
LOW CAPACITANCE TVS ARRAY DESCRIPTION The is a low capacitance, transient voltage suppressor designed to protect applications such as wireless telecommunication devices, PCMCIA cards and portable electronics.
EMIFILr (Inductor type) Chip Ferrite Bead
1 EMIFILr (Inductor type) Chip Ferrite Bead BLM21B Series (85 Size) Dimensions Equivalent Circuit.5±.2 *2.85±.2 *1 2.±.2 1.25±.2 *1 BLM21BD222SN1 / 21BD272SN1 :1.25±.2 *2 BLM21BD272SN1:.3±.2 EIA CODE :
Schottky Surface Mount Limiting Diode Driver RoHS Compliant
GC9952-6LP Datasheet Schottky Surface Mount Limiting Diode Driver RoHS Compliant Preliminary December 2017 Contents 1 Revision History... 1 1.1 Revision 1.0... 1 2 Product Overview... 2 2.1 Applications...
Automotive Camera Module RF Connector POK15 Series
Features 1. Superior locking mechanism Our exclusive locking method keeps the mating part in constant contact with the electric reference plane(top Touch), ensuring high contact stability and reliability.
The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment.
Compliance with RoHS Directive The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. FEATURES 1. 2.5 mm wide ultra-slim two-piece connectors
GBLC03 - GBLC24C. Ethernet 10/100/1000 Base T SMART Phones Handheld - Wireless Systems USB Interface
ultra LOW CAPACITANCE TVS ARRAY Description The GBLCxx and GBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and
MH Series High Current Chip Ferrite Beads
*ohs COMPLIANT & **HALOGEN FEE Features High resistance to heat and humidity esistance to mechanical shock and pressure Accurate dimensions for automatic surface mounting Wide impedance range ohs compliant*
TQQ MHz LTE Band 3 Uplink BAW Filter
Applications LTE Band 3 Uplink Infrastructure Base Station General Purpose Wireless 6 Pin 3x3 mm leadless SMT Package Product Features Functional Block Diagram 75 MHz Bandwidth High Attenuation Low Loss
Headset/Speaker EMI Filter with ESD Protection CM1416/D. Features. Product Description. Applications. ±30kV ESD protection on each channel per
Headset/Speaker EMI Filter with ESD Protection CM1416 Features Functionally and pin compatible with the CSPEMI201A and CM1411 OptiGuard coated for improved reliability at assembly Two channels of EMI filtering
AEM GcDiode TM ESD Suppressors
Part Number: ES0603V014BT, ES0402V014BT Features Glass ceramic monolithic structure Ultra low capacitance (0.25pF typical) Low leakage current (
MADR TR. SPDT PIN Diode Driver Rev. V3. Features. Functional Block Diagram. Description. Pin Configuration. Ordering Information
Features Moderate Speed, CMOS Technology (25 ns) Complementary Outputs High Drive Current Capability (± 50 ) Low Current Consumption Plastic SOIC Body for SMT Applications Tape and Reel Packaging Available
ULL0402FC05C. Description. Mechanical characteristics PIN CONFIGURATION. SMART Phones Portable Electronics SMART Cards
LOW CAPACITANCE unbumped flip chip tvs array Description The ULLC0402FC05C Flip Chip employs advanced silicon P/N junction technology for unmatched board-level transient voltage protection against Electrostatic
TransferJet RF Coupler Part No. SR4T014 lamiiant Product Specification
TransferJet RF Coupler lamiiant Product Specification 1. Features Coupler for TransferJet applications Short range coupling device for secure data transfer Point to point connectivity SMD mounting Small
EMIFILr (Inductor type) Chip Ferrite Bead
1 EMIFILr (Inductor type) Chip Ferrite Bead BLM18B Series (63 Size) Dimensions Equivalent Circuit.4±.2.8±.15 1.6±.15.8±.15 (esistance element becomes dominant at high frequencies.) : Electrode (in mm)
2731GN-120V Datasheet Class-AB GaN-on-SiC HEMT Transistor
2731GN-120V Datasheet Class-AB GaN-on-SiC HEMT Transistor Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100
MLVG0402 Series Engineering Specification
RoHS Pb MLVG0402 Series Engineering 1. Scope (1) Lead free type (2) SMD type zinc oxide based ceramic chip (3) Insulator over coat keeps excellent low and stable leakage current (4) Plating termination
EMIFILr (Inductor type) Chip Ferrite Bead
EMIFILr (Inductor type) Chip Ferrite Bead BLM21B Series (85 Size) 1 c Dimensions c Equivalent Circuit E T 2.±.2 1.25±.2 Part Number T E BLM21B (exclude items below).85±.2.5±.2 BLM21BD222SN1 1.25±.2.5±.2
Type 168/185 Metallized Polyester Radial Lead Capacitors
Radial Box Metallized Polyester Capacitors for Automatic Insertion The Type 168/185 series radial lead metallized polyester box capacitors are available in bulk (Type 168) or on ammo pack or tape and reel
3M 4-Wall, Tripolarized Header.050".100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series
Tripolarized for robust alignment when mating to 820 series socket 50 mil 100 mil halves the connector length vs. traditional 100 mil x 100 mil products Latching Ejector for rugged high performance applications
MMA043AA Datasheet 0.5 GHz 12 GHz GaAs phemt MMIC Wideband Low-Noise Amplifier
MMA043AA Datasheet 0.5 GHz 12 GHz GaAs phemt MMIC Wideband Low-Noise Amplifier Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA:
External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805] [1206]
![External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805] [1206]](/thumbs/89/97514564.jpg "External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805] [1206]")
Multilayer Chip Ferrite Bead G Series Operating Temp. : - ~+12 FEATUES Internal silver printed layers and magnetic shielded structures to minimize crosstalk Can be used in a wide range of frequency (from
Motocraft Multilayer Varistor
MLV1005 / 1608 SERIES ENGINEERING SPECIFICATION 1. SCOPE (1) Lead free type (2) SMD type zinc oxide based ceramic chip (3) Insulator over coat keeps excellent low and stable leakage current (4) Plating
Surface Mount Multilayer Ceramic Chip Capacitors
Surface Mount Multilayer Ceramic Chip Capacitors Access hole at slot location (Ø 40 mm min.) W 3 Includes flange distortion at outer edge D Full radius W 2 (measured at hub) A C Arbor hole diameter N (hub
SR70 ULTRA LOW CAPACITANCE STEERING DIODE ARRAY DESCRIPTION SOT-143 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE ARRAY DESCRIPTION The is an ultra low capacitance steering diode array. Designed for protection against Electrostatic Discharge (ESD), Electrical Fast Transients (EFT)
SRV05-4. ultra low capacitance steering diode/tvs array. Description. sot-23-6 package. applications
ultra low capacitance steering diode/tvs array Description The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
For Automotive Chip Ferrite Bead for Automotive
For Automotive Chip Ferrite Bead for Automotive BLM21B Series (85 Size) 1 c Dimensions c Equivalent Circuit.5±.2 *2.85±.2 *1 2.±.2 1.25±.2 *1 BLM21BD222SH1 / 21BD272SH1 :1.25±.2 *2 BLM21BD272SH1:.3±.2
2R2. Design Code Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors AEC-Q200 qualified available with PPAP for size