S1F77330 Series Technical Manual

Size: px

Start display at page:

Download "S1F77330 Series Technical Manual"

Sharlene Willis
5 years ago
Views:

1 Series Technical Manual Rev.2.1

2 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. When exporting the products or technology described in this material,you should comply with the applicable export control laws and regulations and follow the procedures required by such lows and regulations. You are requested not to use, to resell, to export and/or to otherwise dispose of the products(and any technical information furnished, if any)for the development and/or manufacture of weapon of mass destruction or for other military purposed. All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies. SEIKO EPSON CORPORATION 2013, All rights reserved.

3 Table of Contents 1. OVERVIEW Features Application Package Application Circuit Example Pin Assignment(M0A) Pin Description(M0A) Truth Table(M0A) Pin Assignment(B0A) Pin Description(B0A) Truth Table(B0A) Block Diagram ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings Recommended Operating Conditions DC Electrical Characteristics AC Electrical Characteristics Capacitance TYPICAL CHARACTERISTICS DIAGRAMS TEST DIAGRAMS PACKAGE INFORMATION Package Outline Package Outline Marking(M0A) Marking(B0A) Revision History...14 Series Technical Manual Seiko Epson Corporation i

4 1. OVERVIEW 1. OVERVIEW The series is the bus switch suitable for USB applications. The adopted CMOS process technology characterizes the series by low power consumption. The compact WCSP adopted for the package enables the series to be mounted on high-density assemblies. The built-in level shift circuit eliminates the need of external level shift circuitry for the input to this IC. 1.1 Features Input voltage range : 3.0V to 3.6V Low-current consumption : 14μA (MAX) Static current : 1μA (MAX) Bus switch ON resistance : 6.0Ω (typ) Bus switch pin capacity (D system) : 2.7pF (typ) Bus switch pin capacity (D* system) : 1.45pF (typ) 1.2 Application Mobile communication equipment (mobile phones, cordless phones, and wireless communication devices) Mobile AV equipment Home appliances Cameras, and video equipment Portable game devices Battery-based equipment 1.3 Package M0A:PLP-10 (2.50mm 2.70mm) B0A:WCSP-10 (1.118mm 1.625mm) 1.4 Application Circuit Example FS USB Controller or HS USB Controller VDD DX DY Control D1X D1Y D2X D2Y USB Connector 1 USB Connector 2 USB Host Controller USB Device Controller VDD DX DY USB Connector Control SEL XOE SEL XOE Figure 1 Application Circuit Example Series Technical Manual Seiko Epson Corporation 1

5 1. OVERVIEW 1.5 Pin Assignment(M0A) D1X VDD D1X D1Y D2X SEL DX DY XOE DX DY D2X D1Y D2Y 5 D2Y VSS 6 SEL XOE Control (TOP VIEW) Figure 2 Pin Assignment Figure 3 Bus switch symbol * Central land area in this IC is not used. Do not mount any pin 1.6 Pin Description(M0A) Pin No. Pin Name Pin Description 1 VDD Power supply pin 2 D1X Data port 1 (X) 3 D1Y Data port 1 (Y) 4 D2X Data port 2 (X) 5 D2Y Data port 2 (Y) 6 VSS GND pin 7 XOE Bus switch enable input pin 8 DY Data port COM(Y) 9 DX Data port COM(X) 10 SEL Switch select input pin 1.7 Truth Table(M0A) SEL XOE Bus Switch status X HIGH Disconnected LOW LOW DX = D1X, DY = D1Y HIGH LOW DX = D2X, DY = D2Y 2 Seiko Epson Corporation Series Technical Manual

6 1. OVERVIEW 1.5 Pin Assignment(B0A) A B C D E SEL D1X VDD DX D1Y DY D2X VSS DX DY SEL F XOE D2Y XOE Control D1X D2X D1Y D2Y (TOP VIEW) Figure 2 Pin Assignment Figure 3 Bus switch symbol 1.6 Pin Description(B0A) Pin No. Pin Name Pin Description A1 SEL Switch select input pin C1 DX Data port COM(X) D1 DY Data port COM(Y) F1 XOE Bus switch enable input pin E2 VSS GND pin F3 D2Y Data port 2 (Y) D3 D2X Data port 2 (X) C3 D1Y Data port 1 (Y) A3 D1X Data port 1 (X) B2 VDD Power supply pin 1.7 Truth Table(B0A) SEL XOE Bus Switch status X HIGH Disconnected LOW LOW DX = D1X, DY = D1Y HIGH LOW DX = D2X, DY = D2Y Series Technical Manual Seiko Epson Corporation 3

7 1. OVERVIEW 1.8 Block Diagram D1X D2X DX D1Y D2Y DY VDD SEL Level Shifter XOE Level Shifter Gate Control VSS Figure 4 Block diagram 4 Seiko Epson Corporation Series Technical Manual

8 2. ELECTRICAL CHARACTERISTICS 2. ELECTRICAL CHARACTERISTICS 2.1 Absolute Maximum Ratings Item Symbol Min. Max. Unit Supply voltage VDD V Input pin voltage XOE, SEL VIN V Switch input voltage D1X,D2X,D1Y,D2Y,DX,DY VSW V Storage temperature TSTG C 2.2 Recommended Operating Conditions Item Symbol Min. Max. Unit Supply voltage VDD V Input pin voltage XOE,SEL VIN V Switch input voltage D1X,D2X,D1Y,D2Y,DX,DY VSW V Operating temperature Ta C 2.3 DC Electrical Characteristics (Unless otherwise specified: Ta=-40 C to 85 C) Item Symbol Conditions VDD[V] Min. Typ. Max. Unit Clamp diode voltage VIK IL=18mA V High Level Input voltage VIH 3.0 to V Low Level Input voltage VIL 3.0 to V Input pin leak IIN 0V VIN VDD 3.6* μa Switch off leak IOZ 0V VSW VDD 3.6* μa Power off Leakage current IOFF 0V VSW VDD,VDD=0V μa (DX, DY) Switch ON resistance RON VSW=0.4V, ION, =-8mA Ω ΔON resistance ΔRON VSW=0.4V, ION, =-8mA Ω ON resistance flatness RON (Flat) 0V VSW 1V, ION=-8mA Ω Quiesent current ICC VIN=3.6V μa Current consumption ICCT VIN=0V, VSW=2.6V μa * Describe the value based on the USB full speed standard. Series Technical Manual Seiko Epson Corporation 5

9 2. ELECTRICAL CHARACTERISTICS 2.4 AC Electrical Characteristics (Unless otherwise specified: Ta=-40 C to 85 C) Item Symbol Conditions VDD[V] Min. Typ. Max. Unit Turn ON Time ton RL=50Ω, CL=5pF 3.0 to μs Turn OFF Time toff RL=50Ω, CL=5pF 3.0 to ns Propagation Delay tpd RL=50Ω, CL=5pF ns OFF Isolation OIRR RL=50Ω, CL=0pF, f=240mhz 3.0 to db Crosstalk Xtalk RL=50Ω, f=240mhz 3.0 to db -3dB Bandwidth BW RL=50Ω, CL=0pF, f=240mhz 3.0 to MHz Channel to Channel tsk(o) RL=50Ω, CL=5pF 3.0 to ps Skew Skew of Opposite tsk(p) RL=50Ω, CL=5pF 3.0 to ps Transitions of the Same Output Total Jitter tj RL=50Ω, CL=5pF, tr=tf=500ps at 480Mbps 3.0 to ps 2.5 Capacitance (Unless otherwise specified: Ta=-40 C to 85 C) Item Symbol Conditions VDD[V] Min. Typ. Max. Unit Control input pin CIN VDD=0V, f=1mhz pf capacitance Bus switch ON CON VIN=0V, f=1mhz pf capacitance Bus switch OFF COFF1 VDD=0V,f=1MHz pf capacitance1 (D1X, D1Y, D2X, D2Y) Bus switch OFF capacitance2 (DX, DY) COFF2 VDD=0V,f=1MHz pf 6 Seiko Epson Corporation Series Technical Manual

10 3. TYPICAL CHARACTERISTICS DIAGRAMS 3. TYPICAL CHARACTERISTICS DIAGRAMS Gain[dB] Gain[dB] Frequency[MHz] Frequency[MHz] Figure 5 Gain-frequency characteristic Figure 6 OFF Isolation Gain[dB] Frequency[MHz] Figure 7 Crosstalk Figure 8 HS-Eye characteristic Series Technical Manual Seiko Epson Corporation 7

11 4. TEST DIAGRAMS 4. TEST DIAGRAMS V ON D1n, D2n Dn NC ID (OFF) A V IN XOE V S I ON XOE V S V IN R ON = V ON / I ON Figure 9 ON resistance Figure 10 OFF-leakage t RISE = 500ps t FALL = 500ps D1n, D2n V IN Dn C L R L VOUT Input: D1n Input: D2n 800mV 90% 90% 50% 50% 400mV 10% 10% V XOE V OH Output: DX, DY 50% 50% V OL t PLH t PHL t PD = t PLH or t PHL Figure 11 AC characteristic Figure 12 Switch Propagation delay waveform t RISE = 2.5ns t FALL = 2.5ns 1.8V Input: XOE 0V 90% 90% 50% 50% 10% 10% V OH 90% 90% Output: DX, DY V OL t ON t OFF Figure 13 Turn on/turn off waveform 8 Seiko Epson Corporation Series Technical Manual

12 4. TEST DIAGRAMS t RISE = 500ps t FALL = 500ps 800mV Input: D1X, D1Y Input: D2X, D2Y 90% 90% 50% 50% 400mV 10% 10% t RISE = 500ps t FALL = 500ps V OH Input: D1n Input: D2n 800mV 400mV 90% 90% 50% 50% 10% 10% Output1: DX (or DY) V OL t PLH1 50% 50% t PHL1 V OH V OH Output: DX, DY 50% 50% Output2: DY (or DX) 50% 50% V OL V OL t PLH t PHL t PLH2 t PHL2 t SK(P) = t PLH - t PHL t SK(O) = t PLH1 - t PLH2 or t PHL1 - t PHL2 Figure 14 Switch skew test waveform Network Analyzer R S V IN V S V XOE V OUT R T Figure 15 Bandwidth measurement circuit Series Technical Manual Seiko Epson Corporation 9

13 4. TEST DIAGRAMS Network Analyzer R S R T V IN V S V XOE V OUT R T O IRR = 20 log 10(V OUT/V IN) Figure 16 OFF isolation NC Network Analyzer R S V IN V S V XOE R T V OUT R T Figure 17 Crosstalk XOE VXOE = 0V Dn f=1mhz Capacitance Metar Dn f=1mhz Capacitance Metar D1n, D2n D1n, D2n XOE Figure 18 ON capacitance Figure 19 OFF Capacitance 10 Seiko Epson Corporation Series Technical Manual

14 5. PACKAGE INFORMATION 5. PACKAGE INFORMATION 5.1 Package Outline Top View Bottom View 1=1mm Series Technical Manual Seiko Epson Corporation 11

15 5. PACKAGE INFORMATION 5.1 Package Outline Top View A1 Corner D Index y S A1 A A2 E Bottom View F E D C B A A1 Corner SD e ZD ZE SE φb + φx M e 2 (unit:mm) Symbol Dimension in Milimeters Min. Nom. Min. D E A A A e e b x y SD SE ZD ZE Seiko Epson Corporation Series Technical Manual

16 5. PACKAGE INFORMATION 5.2 Marking(M0A) 3 3 A 3 3 A : Product Code * * * * * * : Lot Code INDEX 5.2 Marking(B0A) INDEX 3 A : Product Code 3 A * * * * * * * * : Lot Code Series Technical Manual Seiko Epson Corporation 13

17 6. Revision History 6. Revision History Rev. No. Date Page Category Contents Rev /01 All new Attachment-1 Rev /02 P1 revise add M0A P2 revise add M0A P13 revise add M0A Rev /02 P5 revise 2.3 DC Electrical Characteristics Input pin leak (Conditions) 0V VIN VCC 0V VIN VDD (VDD[V]) * Switch off leak (Conditions) 0V VSW VCC 0V VSW VDD (VDD[V]) * Power off Leakage current (Conditions) 0V VSW VCC,VCC=0V 0V VSW VDD,VDD=0V 14 Seiko Epson Corporation Series Technical Manual

18 International Sales Operations AMERICA EPSON ELECTRONICS AMERICA, INC. 214 Devcon Drive, San Jose, CA 95112, USA Phone: FAX: EUROPE EPSON EUROPE ELECTRONICS GmbH Riesstrasse 15, Munich, GERMANY Phone: FAX: ASIA EPSON (CHINA) CO., LTD. 7F, Jinbao Bldg., No.89 Jinbao St., Dongcheng District, Beijing , CHINA Phone: FAX: SHANGHAI BRANCH 7F, Block B, Hi-Tech Bldg., 900 Yishan Road, Shanghai , CHINA Phone: FAX: SHENZHEN BRANCH 12F, Dawning Mansion, Keji South 12th Road, Hi-Tech Park, Shenzhen , CHINA Phone: FAX: EPSON HONG KONG LTD. Unit ,7/F Trade Square,681 Cheung Sha Wan Road, Kowloon Hong Kong Phone: FAX: Telex: EPSCO HX EPSON TAIWAN TECHNOLOGY & TRADING LTD. 14F, No. 7, Song Ren Road, Taipei 110, TAIWAN Phone: FAX: EPSON SINGAPORE PTE., LTD. 1 HarbourFront Place, #03-02 HarbourFront Tower One, Singapore Phone: FAX: SEIKO EPSON CORP. KOREA OFFICE 50F, KLI 63 Bldg., 60 Yoido-dong, Youngdeungpo-Ku, Seoul , KOREA Phone: FAX: SEIKO EPSON CORP. MICRODEVICES OPERATIONS DIVISION IC Sales Dept. IC International Sales Group 421-8, Hino, Hino-shi, Tokyo , JAPAN Phone: FAX: Document Code: First Issue January 2009 H Revised February 2013 in JAPAN

The S1F77330 series is the bus switch suitable for USB applications. The adopted CMOS process technology characterizes

OVERVIEW Power Bus Switch IC 2 to 1 Bus Switch The S1F77330 series is the bus switch suitable for USB applications. The adopted CMOS process technology characterizes the S1F77330 series by low power consumption.