Modular Patient Monitor ---- CritiVue 70. Modular Patient Monitor ---- CritiVue 60. Multiparameter Patient Monitor ---- M9500

Transcription

1 Modular Patient Monitor ---- CritiVue 70 Informative, integrative and high end modular patient montior 15 color TFT LCD with full touch screen for quick menu setting & data review Thermal recorder supporting 3 waveform and 4 record mode 4 different display modes, 7 real time waveforms Fanless cooling system to assure quiet operation Patented with technology of Ambient Brighness Sensor Can upgrade with AGM, BIS, RM, CO, GPRS module, 12 lead ECG module, etc. Various connectibility and mounting solutions LAN/WLAN network solution for up to 128 bedside monitor Applicable to ICU, OR, ER, PACU, patient ward, etc Standard configuration of ECG, NIBP, RESP, SPO2, TEMP, PR (Pulse Rate), Drug dose calculation, OXYCRG + Modular Function Optional configuration of built in thermal printer, 12 lead ECG, IBP, Nellcor SPO2, EtCO2, ICG, GPRS module, Multi-Gas, Temp probe, Remote Controller, Bracket, Trolley, Li-ion Battery Modular Patient Monitor ---- CritiVue 60 Informative, integrative and high end modular patient montior 12.1 color TFT LCD with full touch screen for quick menu setting & data review Thermal recorder supporting 3 waveform and 4 record mode 4 different display modes, 7 real time waveforms Fanless cooling system to assure quiet operation Patented with technology of Ambient Brighness Sensor Can upgrade with AGM, BIS, RM, CO, GPRS module, 12 lead ECG module, etc. Various connectibility and mounting solutions LAN/WLAN network solution for up to 128 bedside monitor Applicable to ICU, OR, ER, PACU, patient ward, etc Standard configuration of ECG, NIBP, RESP, SPO2, TEMP, PR (Pulse Rate), Drug dose calculation, OXYCRG + Modular Function Optional configuration of built in thermal printer, 12 lead ECG, IBP, Nellcor SPO2, EtCO2, ICG, GPRS module, Multi-Gas, Temp probe, Remote Controller, Bracket, Trolley, Li-ion Battery Multiparameter Patient Monitor ---- M (1024x768) high resolution Color TFT LCD Backlight buttons, easy to operate at night Rechargeable lithium battery, long life time Various extensible interfaces Nurse call function Dual alarm light Any two sets can be each other's central monitor Maximum 10 waveform display Short trend display 168 hour trend data and trend maps for HR, SPO2, NIBP, PR, RESP., CO2, TEMP-1/TEMP-2, AA, N2O, O2, IBP-1/IBP-2, ST, C. I. Standard configuration: ECG, HR, NIBP, RESP, SPO2, 2-TEMP, Lithium battery, OXYCRG, ethernet network Optional configuration: built in 3 channel thermal recorder, 12 lead ECG, 2-IBP, Nellcor/Masimo SPO2, EtCO2 (side stream, main stream), ICG, anesthetic Gas, SD card, USB port, wireless connectivity, wall mount, rolling stand

2 Multiparameter Patient Monitor ---- GT9003F 15 high resolution Color TFT LCD 7 lead ECG with maximum 9 waveform display on the same screen 720 hours trend datat including 2880 groups of NIBP data for record/review 60 minutes real time ECG waveform display Frozen waveform record, review and output SPO2 pulse tone modulation (pitch tone) ST analysis, arrhythmia analysis Pacemaker detection, protection of interference from defibrillation and high frequency ESU Complete and flexible mounting solution for transportation and monitoring Wire/wireless to central monitoring system Standard configuration: ECG, NIBP, RESP,SPO2, 1-TEMP, HR, Drug dose calculation, OXYCRG Optional configuration: built in thermal printer, 2-TEMP, Nellcor SPO2, EtCO2, single/dual IBP Multiparameter Patient Monitor ---- H9 15 high resolution Color TFT LCD Backlight buttons, easy to operate at night Various language operating systems Built in detachable rechargeable lithium battery, 2.5 hour operating time Dual alarm light with 3 level audible and visual alarm Supporting wireless or wired networking Maximum 8 waveform display 120 hour waveform for review 400 group NIBP measurement 72 hour trend data and trend graph 200 group alarm event for review Arrhythmia analysis and drug dose calculation Standard configuration of ECG, NIBP, RESP,SPO2, 1-TEMP, PR, Drug dose calculation, OXYCRG Optional configuration of touch screen, built in thermal printer, 2-TEMP, EtCO2, single/dual IBP Multiparameter Patient Monitor ---- CPM-9000W 12.1 high resolution Color TFT LCD (optional 15" LCD) Wall mounting design with only super thin 6cm in width Multiple language available Built in rechargeable lithium battery Over pressure protection Arrhythmia and ST-segment analysis Audible and visual alarm Supporting wireless or wired networking Nurse call function 72 hour tabular and graphic trends of all parameters group of NIBP data storage and review Maximum 7 waveform display Standard configuration of ECG, NIBP, RESP, SPO2, 1-TEMP, PR, Drug dose calculation, OXYCRG Optional configuration of built in thermal printer, 2-TEMP, EtCO2, single/dual IBP

3 Multiparameter Patient Monitor ---- CMS8000 High resolution 12.1" color TFT display ECG waveforms of 7 leads display on the same screen Arrhythmia analysis and S-T segment analysis Data and waveform color be adjustable Built-in rechargeable lithium battery Ethernet connection to support network capacity & compatibility with HIS 72-hours graphic and tabular trends of all parameters 72 alarm events of all parameters recall 32 seconds full-disclosure waveform review 500 NIBP measurement data can be stored and recall Lightweight,compact and portable Suitable for adult,pediatric and neonatal patient Standard configuration of ECG, NIBP, RESP,SPO2, 1-TEMP, PR, Drug dose calculation, OXYCRG Optional configuration of built in thermal printer, EtCO2, single/dual IBP Multiparameter Patient Monitor ---- H high resolution Color TFT LCD 7/12 lead real time display Various language operating systems Built in detachable rechargeable lithium battery, 2.5 hour operating time Dual alarm light with 3 level audible and visual alarm Supporting wireless or wired networking Maximum 7 waveform display 680 hour waveform for review 8000 group NIBP measurement 72 hour trend data and trend graph 200 group alarm event for review Arrhythmia analysis and drug dose calculation Standard configuration of ECG, NIBP, RESP,SPO2, 1-TEMP, PR, Drug dose calculation, OXYCRG Optional configuration of touch screen, built in thermal printer, 2-TEMP, EtCO2, single/dual IBP Multiparameter Patient Monitor ---- CPM high resolution Color TFT LCD Anti interference from defibrillation and electrosurgical unit Multiple language available Built in rechargeable lithium battery Over pressure protection Arrhythmia and ST-segment analysis Audible and visual alarm Supporting wireless or wired networking Nurse call function 72 hour tabular and graphic trends of all parameters group of NIBP data storage and review Maximum 4 waveform display Standard configuration of ECG, NIBP, RESP, SPO2, 1-TEMP, PR, Drug dose calculation, OXYCRG

4 Multiparameter Patient Monitor ---- CMS6000A High resolution 8.4" color TFT display ECG waveforms of 5 leads display on the same screen Arrhythmia analysis and S-T segment analysis Data and waveform color be adjustable Built-in rechargeable lithium battery Ethernet connection to support network capacity & compatibility with HIS 72-hours graphic and tabular trends of all parameters 72 alarm events of all parameters recall 32 seconds full-disclosure waveform review 500 NIBP measurement data can be stored and recall Lightweight,compact and portable Suitable for adult,pediatric and neonatal patient Standard configuration of ECG, NIBP, RESP,SPO2, 1-TEMP, PR, Drug dose calculation, OXYCRG Optional configuration of built in thermal printer, EtCO2, single/dual IBP Multiparameter Patient Monitor ---- H6 8.4 high resolution Color TFT LCD Backlight buttons, easy to operate at night Various language operating systems Built in detachable rechargeable lithium battery, 2.5 hour operating time Dual alarm light with 3 level audible and visual alarm Supporting wireless or wired networking Maximum 8 waveform display 120 hour waveform for review 400 group NIBP measurement 72 hour trend data and trend graph 200 group alarm event for review Arrhythmia analysis and drug dose calculation Standard configuration of ECG, NIBP, RESP,SPO2, 1-TEMP, PR, Drug dose calculation, OXYCRG Optional configuration of touch screen, built in thermal printer, 2-TEMP, EtCO2, single/dual IBP Handheld Patient Monitor ---- PM-900A 5" Color LCD with touch screen Storage/Review data upt to 9999 exams and 3888 group trend data Adjustable audible and visible alarm, and sensor off alarm Long time monitoring and sleeping monitoring USB and bluetooth data upload Built in rechargeable Li-ion battery supporting 15 hour operation Horizontal amd vertical display selectable Free advanced software for data downloading, telemonitoring, and optional bluetooth printer to print out ECG waveform/other data Easy to carry, with stand for fixing, suitable for ambulance center All in one designed module Meeting requirements of hospital & other deparments in emergency treatment, first aid, rescue, etc Standard configuration of ECG, NIBP, SPO2, 1-TEMP, PR Optional configuration of bluetooth printer to print out the waveform and data

5 Vital Sign Monitor ---- CareVue 30 Series Very light weight, dedicated to mobile medical applications Numeric LED + 3.2' Graphic TFT LCD with integrative display Two Plethysmogram waveforms More than 10 hours long life Li-ion battery SD Card for storage of more than 10,000 patients data and info Storage of 4,000 groups trend data Anti-defibrillation and anti-electrosurgical interference Shockproof and waterproof with high reliability Car power adaptor and nurse call Unique ambient brightness sensor to ensure patients for better rest Ethernet connection Various connectibility and mounting solutions LAN/WLAN network solution for up to 128 bedside monitor Configuration as follows Model NIBP SPO2 TEMP ECG CareVue 30A CareVue 30B CareVue 30C CareVue 30D CareVue 30E CareVue 30F CareVue 30G EtCO2 Vital Sign Monitor ---- PC-900 Series Tabletop design with high resolution display for remote view 3.5" LCD + Big, bright digital LEDs Up to 12,000 groups of NIBP measurement storage Up to 96 hours of SPO2 and HR trend storage Up to 2,000 group of SPO2 measurement storage 120 hours ECG waveforms storage and review Accurate NIBP measurement with hardware and software overpressure protection Built in rechargeable Lithium ion battery with 6 hour operatio time Audible & visible alarm with 3 levels of alarm events Nurse call function Tourniquet function Applicable to adult, pediatric and neonate USB connectivity for data uploading and software upgrading Optional: built in thermal printer, Nellcor SPO2 Configuration as follows Model ECG SPO2 NIBP TEMP EtCO2 PC-900 PC-900S PC-900N PC-900SN PC-900SNT PC-900A

6 Vital Sign Monitor ---- PM-800 Series 2.8 inch color LCD with real time display Different configuration as per parameters of NIBP, SPO2, Pulse Rate and Temperature SPO2 waveform, PR (Pulse Rate) strength display Maximum 3888 groups of storage/review trend data with duration for each data selectable Built-in rechargeable Li-ion battery supporting 5 hour operation Automatic power off in case no operation within the preset time, with time interval selectable USB interface for PC connection to support tele-monitoring by data transmission via internet Battery capacity indicator and prompt when power low Audible & visual alarm when parameters exceeds and/or sensor-off Configuration as follows Model NIBP SPO2 TEMP PR PM-800A PM-800B PM-800C Capnograph Monitor ---- PC-900A Applicable for Emergency Medical Service, Intensive Care Unit (ICU) etc 3.5" LCD to display CO2 waveform, SpO2 plethysmogram and system parameters Big LED to display End-tidal Carbon Dioxide (EtCO2), Insred Carbon Dioxide (InsCO2), Resration Rate (RR), SpO2 and Pulse Rate (PR) CO2 measuring module with advanced technology for quick and accurate EtCO2 and RR measurement EtCO2 and SpO2 trend graph display for last 12, 24, or 96 hours Unique SpO2 measuring technique ensures sensitive and accurate SpO2, PR (Pulse Rate) measurement Audible & visible alarm with 3 levels of alarm events Nurse call function Built in rechargeable Lithium ion battery with 6 hour operatio time USB connectivity for data uploading and software upgrading Optional: built in thermal printer, Nellcor SPO2 Capnograph Monitor ---- KMI605A Big LCD to display parameter measurement Standard configuration of EtCO2/CO2, RESP., with optional SPO2 Infrared ray gas analysis KPA, mmhg or % selectable Audible and visual alarm for exceeding limits and apnea 24 hour trend diagram keeps still available after power off Data output via RS232 port Easy to connect and fix with anesthesia machine Sidestream mode, working under heavy humidity environment, suitable for intubatton patient; mainstream probe with more convenience in use Digital SPO2 system to guarantee accuracy in case movement or weak perfusion

7 Handheld Pulse Oximeter ---- PM-600A Laptop design with compact structure, easy for carrying and handling Standard configuration of SPO2, TEMP, PR (Pulse Rate) and PLETH 2.8 inch color TFT LCD for real time display in big font and big screen Storage/Review trend data up to 3888 groups Long time monitoring and sleeping monitoring Unique software for telemonitoring by data transmission synchronously via internet USB/Bluetooth for reviewing the measurements in big screen via connecting PC and upload history data to PC for review, printing or storage Operated by AC power or the builtin rechargeable Li-ion battery Built-in rechargeable Li-ion battery with maximum 15 hour operation time Automatic power off in case no operation within the preset time duration Two solution to charge battery: USB port via PC or by AC power via adapter Audible and visual alarm in case parameters exceeded and sensor-off Handheld Pulse Oximeter ---- PM-600B Laptop design with compact structure, easy for carrying and handling Standard configuration of SPO2, TEMP, PR (Pulse Rate) and PLETH 2.8 inch color LCD for real time display SpO2 waveform and PR strength Storage/Review trend data up to 3888 groups Long time monitoring and sleeping monitoring Unique software for telemonitoring by data transmission synchronously via internet USB interface for reviewing the measurements in big screen via connecting PC and upload history data to PC for review, printing or storage Operated by ACommon AA alkaline or rechargeable battery Built-in rechargeable battery with maximum 6 hour operation time Automatic power off in case no operation within the preset time duration Audible and visual alarm in case parameters exceeded and sensor-off Optional AC power and mobile phone software Handheld Pulse Oximeter ---- PM-600C Laptop design with compact structure, easy for carrying and handling Brightness adjustable LED to display SPO2 and PR (Pulse Rate) Standard configuration of SPO2, PR, and PR strength Built-in rechargeable Li-ion battery with maximum 15 hour operation time Automatic power off in case no operation within 3 minutes Battery charging by USB port via in connection with PC Indicator for battery capacity with instant prompt for low battery capacity Audible and visual alarm for sensor-off with alarm limit selectable Applicable to adult and children Suitable for use in hospital operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment Dimension of 63x120x23mm Net weight of 190g excluding sensor and batteries

8 Handheld Pulse Oximeter ---- PM-600D Laptop design with compact structure, easy for carrying and handling Large brightness adjustable LED to display SPO2 and PR (Pulse Rate) Standard configuration of SPO2, PR, and PR strength Operated by A Common AA alkaline or rechargeable battery Rechargeable battery with maximum 7 hour operation time Automatic power off in case no operation within 3 minutes Battery charging USB port via in connection with PC Indicator for battery capacity with instant prompt for low battery capacity Audible and visual alarm for sensor-off with alarm limit selectable Applicable to adult, pediatric, infant and neonate Applicable to animals selectively Suitable for use in hospital operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment Dimension of 63x120x32mm Net weight of 130g excluding sensor and batteries Handheld Pulse Oximeter ---- PM-600E Laptop design with compact structure, easy for carrying and handling Large brightness adjustable LED to display SPO2 and PR (Pulse Rate) Standard configuration of SPO2, PR, and PR strength Operated by A Common AA alkaline or rechargeable battery Rechargeable battery with maximum 7 hour operation time Automatic power off in case no operation within 3 minutes Battery charging USB port via in connection with PC Indicator for battery capacity with instant prompt for low battery capacity Audible and visual alarm for sensor-off with alarm limit selectable Applicable to adult, pediatric, infant and neonate Suitable for use in hospital operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment Optional AC power Dimension of 63x120x32mm Net weight of 130g excluding sensor and batteries Fingertip Pulse Oximeter ---- CMS50B Integrated with SPO2 probe and display module, small, easy for carrying Segment LCD to display of SpO2, PR and pulse strength Immediate real time spot check Single button interface, easy for operation Automatic power off after 5 seconds without operation or signal Indicator for battery capacity with instant prompt for low battery capacity Less than 0.4% perfusion AAA alkaline with maximum 30 hour operation time Interference resistant capacity agasint ambient light Applicable to hospital, community medical center, sports healthcare, etc Dimension of 66x36x33mm, with net weight of 65g including battery

9 Fingertip Pulse Oximeter ---- A3 Colorful OLED with 6 display modes, big font, digital and PLETH Standard configuration of SPO2, Pulse Rate, pulse strength and PLETH Four direction readings automatically Audible and visual alarm with limit can be set manually Automatic power off when no signals fater 8 seconds Indicator for battery capacity with instant prompt for low battery capacity Accurate monitoring enven in case of perfusion less than 0.4% Powered by AAA alkaline/rechargeable battery Power consumption less than 30mA Applicable to hospital, community medical center, sports healthcare, etc Fingertip Pulse Oximeter ---- YK-80A Integrated with SPO2 probe and display module, small, easy for carrying Two color OLED display with four dispaly modes Standard configuration of SPO2, Pulse Rate, pulse strength and PLETH Customized option of five color (pink, blue, purple, green, grey) Automatic power off after 8 seconds without operation Indicator for battery capacity with instant prompt for low battery capacity Less than 0.4% perfusion AAA alkaline battery with maximum 50 hour operation time Low power consumption Applicable to hospital, community medical center, home healthcare Fingertip Pulse Oximeter ---- YK-80B Integrated with SPO2 probe and display module, small, easy for carrying Two color OLED display with four dispaly modes Standard configuration of SPO2, Pulse Rate, pulse strength and PLETH Customized option of two color (black and white) Automatic power off after 8 seconds without operation Indicator for battery capacity with instant prompt for low battery capacity Less than 0.4% perfusion AAA alkaline battery with maximum 50 hour operation time Low power consumption Applicable to hospital, community medical center, home healthcare Fingertip Pulse Oximeter ---- CMS50DL Integrated with SPO2 probe and display module, small, easy for carrying LED to display SpO2, PR, SPO2 bar graph and PR strength Four direction readings automatically Easy operation Automatic power off after 5 seconds without operation Indicator for battery capacity with instant prompt for low battery capacity Less than 0.4% perfusion AAA alkaline with maximum 30 hour operation time Applicable to hospital, community medical center, home healthcare Dimension of 66x36x33mm, with net weight of 65g including battery

10 Respiration Sleep Monitor ---- YH-300 Indicated for the screening of sleep disordered breathing Records data of respiratory oral and nasal airflow, snoring, oxygen saturation, pulse rate & CPAP pressure 7 parameters of SPO2, Pulse Rate, Airflow, Snoring, CPAP Pressure, Recording Time and Battery Power Compliant with level IV of international sleep diagnosis standard Compliance evaluation of CPAP therapy Online data analysis Watch style, light weight and low power consumption 2 inch OLED, displays all parameters and waves in real time Countdown setting for record, device automatically start record at the end of countdown Patient information can be displayed on device Icon operation, recording time and battery power indication Abundant applications as screening of SDB, evaluation of CPAP compliance, homecare of respiratory and pulmonary disease User friendly can be used in patients's home 24 hours embedded recording capacity, micro-sd and bluetooth optional Powerful software and concise report, with analysis software including sleep disordered breathing, oxygen desaturation index. Respiration Sleep Monitor ---- CMS-RS01 Suitable for patients suffered with SAS, OSAHS, COPD, ARDS, vascular diseases, as well persons over 60 years Applicable to hospital examination or healthcare at home Wrist type equipment, tiny and light Convenient operation 1.8" color OLED to display SpO2, pulse rate, pulse waveform and nose flow waveform Alarms for low-power, finger-out and exceeding limits Adjustable screen brightness Real-time clock Time power on/off and manual power on/off TF card multi-case record Data uploaded by internal card reader PC analysis software Specifications SpO2: Measuring range of 35%~100%, Accuracy of ± 2% for 70%~100%, and unspecified for <70% Pulse Rate: Measuring range of 30bpm~250bpm, Accuracy of ±2 bpm or ±2% (whichever bigger) Nose air flow measure: Measuring range of 8rpm~ 40rpm, Accuracy of ±2rpm Dimension: 69mm(L) 50mm(W) 17.3mm (H) Power Supply : ONE 3.7V Lithium Battery

11 Maternal/Fetal Monitor ---- SRF618K9 Inegrated wireless technology to enhance triplets nonitoring and two bed monitoring With unique solution for monitoring both fetal and maternal well being 12.1" foldable high resolution TFT LCD with sensitive/reliable touch buttons and three options for display interface Waterproof transducer with wide beam, high sensitivity, wireless and SOV Storage of 72 hours CTG graph, 1000 NIBP, other maternal parameters SD card to store more than 5000 files Powerful file management with data input and transmission function Tri-network (RS485, LAN, WLAN) for convenient and flexible operation Central monitoring system supporting connection of up to 60 units Multi-core processor to enable real time analysis and assist clinical diagnosis Built in thermal printer of 156mm supporting 75mm/s play back printing Multi-language operation Standard configuration of FHR, TOCO, FM, AFM for fetal, ECG, NIBP, SPO2, RESP and TEMP for maternal Optional configuration of Twins FHR, Tirplets FHR, Wireless transducer, Fetal Simulator, Li-ion battery, trolley Maternal/Fetal Monitor---- CMS800F 8.4 inch TFT color LCD with touch screen and 60 degree folding Three display modes of Standard View, Mother View, Fetal View Single or twins ultrasound transducer Data graph and trend table review of both mother and fetal Built in thermal printer Built in network capability for connect with central monitoring software Progammable alarms All the colors and looks or the parameters can be customized Multi-face views, select focus on mother or fetal Storage of patient information and data Audible and vistual alarm, three level, ajustable high and low limits Colors of parameters and waveforms can be set as per user willing Interface: Socket for connecting fetal FHR, TOCO, and Fetal Movement sensor; Socket for connecting mother's ECG, NIBP and SPO2 sensor; Net Socket(RJ45) for communication cable with Central Monitoring Station Sofrware. Standard configuration of FHR, TOCO, FM, AFM for fetal, ECG, NIBP, SPO2, RESP and TEMP for maternal Fetal Monitor ---- SRF618B5 8.4 inch TFT LCD with 70 degree folding FHR and TOCO displayed I curves and digits Normal FHR range with adjustment in highlight FHR display for twins as separate or overlap 4 types self defined event marks 10 hour data memory Built in thermal printer with high resolution and long life time Built in PC network connection capacity optional telemetry network Waterproof probe for parturition under water Optional touch screen with intuitive user interface for easy operation Optional compatibility with telemetry networking Optional twins monitoring function Standard configuration of FHR (Fetal Heart Rate), TOCO (Uterus Constriction)

12 Fetal Monitor---- CMS800G Light dexterous appearance, tops horizontally and walls can be hoisted 8.4 inch TFT color LCD with touch screen and 60 degree folding Simultaneously display of waveforms and digits FHR 120 BPM-160 BPM normal range label Storage of continuous 12 hour patient data for recall and printing Continuous 24 hour rea -time monitoring Waveform/picture freezing Built in rechargeable battery(2pcs) to guarantee continuous 2 hour operation afte the mais power breaking off Extra-long life, high-resolution built-in thermal recorder Audible and vistual alarm for upper and lower FHR limits High 9 elements Doppler transducer of 1MHz Built in high-resolution thermal recorder with extra long life Built-in communication port, can be connected with central monitoring system Standard configuration of FHR, TOCO, FM Fetal Monitor--- SRF-618B++ Monitoring FHR (Fetal Heart Rate), TOCO (Uterus Constriction) and FM (Fetal Movement) 5.7 inch blue backlight LCD screen with high resolution and luminence for displaying Recoding all the parameters in graphic tendency curve as well numeric data Alarm on probe off position, abnormal FHR, with adjustable FHR alarming limitation and delay Built in thermal printer with 3 grade (1/2/3 crn/min) tracing speed Built in network connection capacity Optional twins monitoring function Fetal Monitor ---- SRF618B Monitoring FHR (Fetal Heart Rate), TOCO (Uterus Constriction) and FM (Fetal Movement) LED display of FHR, TOCO and FM in numeric data Recoding all the parameters in graphic tendency curve as well numeric data Built in thermal printer with 3 grade (1/2/3 crn/min) tracing speed Built in network connection capacity Light weight (2kG only) can be fixed on wall or laid on table while working

13 Fetal Doppler ---- BF-610 Applicable to detect fetal heart heart rate from the twelfth week LCD to display FHR, real time FHR, heart rate graph, battery capacity, sound volume and synchronous FHR signal Probes of 2MHz and 5MHz for detection of FHR and umbilical blood stream as well interchange RS232 interface for data transmission to PC Alarm for FHR beyond normal range and lower battery capacity Built in rechargeable battery supporting 4 hour operation Store and hold DHR data and graphics for up to 12 hours (optional) Optional built in thermal printer to print out real time FHR graph Handheld Fetal Doppler ---- BF-560 Pocket Fetal Doppler mainly applies to detect the fetal heartbeat rate from the twelfth week Backlight LCD to display FHR, probe working frequency, battery capacity, doppler signal and alarm User frendly interface makes easy operation Output jack can be connect toinstruments (headset) Sound amplified and recorded function Clear sound with a high quality loudspeaker 1.5V batteries be chosen by alkaline battery or rechargeable batteries Mutlti probe with 2.0MHz as standard one, and optional 3.0/5.0/8.0MHz Handheld Fetal Doppler ---- BF-500 Series Pocket Fetal Doppler mainly applies to detect the fetal heartbeat rate from the twelfth week LCD to display FHR accurately (only for BF-500+ and BF-500++) Built-in rechargeable battery can work continuously more than 4 hours Blue backlight LCD display for use conveniently at night (only for BF-500++) Only 250g, can be carried conveniently with a gallus Alarm function when FHR is out of the normal range or battery power is in shortage (only for BF-500+ and BF-500++) Built-in speaker and collocated with earphone jack Standard configuratio of 2.5MHz probe, easy to replace FDA approved BF Handheld Fetal Doppler ---- FD-01 Applicable to detect fetal heart heart rate from the twelfth week Pocket design, easy and convenient to use Big LCD with backlightfor dynamic display of FHR and battery capacity High quality loud speaker with clear timebre and adjustable volume Audio output can be connected to recorder and/or earphone Two operation mode of real time and average Alarm for FHR beyond normal range and lower battery capacity Powered by different battery: AA battery/9v battery/built in rechargeable battery supporting 8 hour operation Automatic power off in 1 minute without any operation Probe of 2.5MHz for accurate detection of FHR

14 Handheld Fetal Doppler ---- Sonoline A Meeting routine examination requirement of obstetricians, midwives, and pregnant women Two modes: manual mode and heart rate processing mode Audio output for connection with earphone/recorder with audio input With slim, power saving and interchangeable ultrasound probe. Easy to use Auto and manual counting Built-in loud speaker Automatic switch-off Battery energy indication Handheld Fetal Doppler ---- Sonoline B Meeting routine examination requirement of obstetricians, midwives, and pregnant women Three modes: manual, areal-time FHR display, averaged FHR display Audio output for connection with earphone/recorder with audio input With slim, power saving and interchangeable ultrasound probe. Easy to use Accurate FHR detection and LCD display Auto and manual counting Built-in loud speaker Automatic switch-off Battery energy indication Handheld Fetal Doppler ---- F60 Home using Fetal Doppler, suitable for the 16 weeks or above pregnant women at home to kow the fetus healthy situation Safe and no radiation, probe and main unit ae all in one design Alarm function when FHR is out of the normal range High sensitive doppler probe Big LCD display and two audio output Recording and playback, Speak FHR number It can be recorded and connected the speaker 2xAAA battery of 1.5V Size of 117x56x31mm Handheld Fetal Doppler ---- F20 Home using Fetal Doppler, suitable for the 16 weeks or above pregnant women at home to kow the fetus healthy situation Safe and no radiation, probe and main unit ae all in one design Alarm function when FHR is out of the normal range High sensitive doppler probe Big LCD display and two audio output Recording and playback, Speak FHR number It can be recorded and connected the speaker 2xAAA battery of 1.5V Size of 110x50x34mm

15 Optional & Consumable Items 5 Lead ECG Cable 7 Lead ECG Cable Temperature Probe Disposable Electrode NIBP Cuff SPO2 Sensor Bracket Trolley