Create MyConfig CMC 4.6. New Functions

Size: px

Start display at page:

Download "Create MyConfig CMC 4.6. New Functions"

Miles Reynolds
5 years ago
Views:

1 Create MyConfig CMC 4.6 New Functions

2 SUA/SCI/CMC application environment 840D Powerline NCU 57x.y SW PL PCU50.3 Win XP HMI-Advanced 840D sl Hardware NCU 7x0.2 SW 1.4 SW 1.5 SW 2.4 SW 2.5 SW 2.6 SW D sl PCU50.5 Win7 SW2.7 SP3 Hardware NCU 7x0.3 SW 4.5 SW 4.4 SW 4.5 SP2 SUA SUA SCI 2.6 SP1 CMC 4.4 (German only) CMC 4.5 CMC 4.6 SUA SCI CMC SinuCom Update Agent SinuCom Installer Create MyConfig SUA 3.0.6, SCI 2.6 SP1, CMC 4.5/4.6 can be installed in parallel on the PC Page 2/50

3 SINAMICS system configuration with Create My Config Automatic configuration with comparative topology Default topology in a SINAMICS offline topology package Page 3/50

4 Definition of terms In order to avoid confusion with the setpoint topology of SINAMICS regarding CMC, the term setpoint topology will only be used as from CMC 4.6 when referring to the setpoint topology of SINAMICS. In the future, the term default topology shall replace the existing term setpoint topology regarding CMC issues. Default topology: A SINAMICS Offline Topology package (SOT) allows to load a CMC package with a configured default topology in SINAMICS with the aim to activate it as a setpoint topology. Comparative topology: Within a CMC package, a configured comparative topology can be compared with the setpoint topology of SINAMICS and an error evaluation can be performed. Setpoint topology: When uploading a DRV online archive or an offline archive, you can display the setpoint topology of SINAMICS in CMC-Topo for diagnosing and, if required, further process this for a comparative or default topology Page 4/50

5 Topologyies Terminology Starter Prj setpoint topology Create MyConfig - Topo SINAMICS SINAMICS Offline Topology package (SOT) with default topology [*.utz] Actual topology [p9901] Setpoint topology [p9903] Comparative topology [*.ust] Setpoint topology [*.arc] for diagnosing and further processing Page 5/50

6 Create MyConfig New functions CMC Page 6/50

7 New functions CMC 4.6 Expert/Shield Password protection for logbook, package, project and components Change of the dialog pages SINAMICS device configuration + archive data selection system configuration configuring of the archive source (online archive including all data -> 00 ) Blocking of configured dialog page functions Dialog page for storing archives and backup Selection of the Windows XP resp.windows 7 operating system System variables for the configuration of dialog pages with read only access New type-oriented input function Expert Cross-reference list Information for language archive IntelliSense and context menu for system variables in manipulation tasks and step conditions Display of the internal versions of the project, components and package Shield Adjust abort conditions Page 7/50

8 New functions CMC 4.6 Diff Merging of files during folder / archive comparison Editing / merging during file comparison Bit editor for the input of hex values Uploading and downloading of online archives during folder / archive comparison Uploading and downloading of online archives during NC data comparison Fading out of NC data which are only included in one archive Plaintext PLC blocks Topo Redesign of graphic in Topo (SMI, SMC, DQE, DQI ) Uploading of online archives for diagnosing Axis-drive assignment for diagnosing single machines Axis-drive assignment for commissioning with CMC packages for series machines Support of the HF spindle Page 8/50

9 New functions CMC 4.6 Setup CMC silent installation CMC Report Display of the versions entered in the project, components resp. package. These versions are called up via the context menu in the Windows explorer or in the menu project in Expert Page 9/50

10 Password protection Page 10/50

11 Redesign of the dialog pages CMC 4.5 CMC 4.6 Conversion Page 11/50

12 Dialog page system configuration n Archiving of all machine data (00) Page 12/50

13 Dialog page SINAMICS topology New function List for comparative topology List for default topology Initial condition Automatic configuration Default topology Offline archive comparative topology comparative topology default topology comparative topology Page 13/50

system PCU under the Package tab PCU, NCU login

14 Selection of the operating system PCU50 Dialog page access to Windows / Linux Selection of the operating system PCU under the Package tab PCU, NCU login information, release for Windows package Page 14/50

15 Storing of archives Backup.arc StepBegin.arc StepEnd.arc Result.arc Page 15/50

16 CF card backup before and after package processing <CF-Id>_backup.tgz <CF-Id>_result.tgz Page 16/50

17 Blocking of configured dialog page functions Page 17/50

18 Introduction of system variables for dialog page configuring The ambient conditions and all configurations on the dialog pages can be read via system variables in manipulation tasks and step conditions Page 18/50

19 IntelliSense when scripting in manipulation tasks and step conditions Autocomplete tool for processing instructions which have been given by a programmer. Example: Page 19/50

20 New type-bound input functions Page 20/50

21 Cross-reference list in the project Cross-reference list for identifiers Page 21/50

22 Cross-reference list in the project Cross-reference list for folder and file objects Page 22/50

23 Installation of language archives Information output when displaying linked language archives Page 23/50

24 CMC Report for projects, packages, components via the menu in Expert and via the context menu in the Windows explorer Page 24/50

25 CMC package processing When processing packages, the package is not always terminated in case of errors. If it is suitable under the given supplementary conditions to continue the package, the user can decide whether the package shall be continued or aborted. Example: Error message One file could not be copied. Continue or Abort Page 25/50

26 Bit editor in CMC-Diff, NC data comparison Page 26/50

27 CMC-Diff merging during the folder-archive comparison Page 27/50

28 Editing and merging during the CMC-Diff file comparison Page 28/50

29 Commissioning of single machines Uploading and downloading of online archives during the Diff NC data comparison and folder / archive comparison Page 29/50

30 Commissioning of single machines Uploading of online archives in Topo Page 30/50

31 Fading out of NC data which are only included in one archive Archive 1 with 00 stored Archive 2 with FF stored Page 31/50

32 PLC plaintext names during the CMC-Diff folder archive comparison and in CMC Expert in components when copying Page 32/50

33 Redesign of graphic in Topo Hardware-based display of SMI, SMC, DQE and Combi Page 33/50

34 Commissioning of single machines Uploading of online archives in Topo Page 34/50

35 Axis-drive assignment Specification of the axis-drive assignment via the comparative topology resp. the default topology in CMC packages Calculation using the I/O address Calculation using the drive number Display of the dagnosis for the axis-drive assignment Page 35/50

Axis-drive assignment 840D sl NC Profibus SINAMICS Drive number MD 30110[AXn] $MA_CTRLOUT_MODULE_NR[0,AX1] I/O address MD 13050[DRVn] $MN_DRIVE_LOGIC_ADDRESS[0] dpslot CU p978[n] DO Variable Axis

36 Axis-drive assignment 840D sl NC Profibus SINAMICS Drive number MD 30110[AXn] $MA_CTRLOUT_MODULE_NR[0,AX1] I/O address MD 13050[DRVn] $MN_DRIVE_LOGIC_ADDRESS[0] dpslot CU p978[n] DO Variable Axis name Index Value Index Value Number Index Value X AX1 DRV1 DRV DO3 dosp Y AX2 DRV2 DRV DO4 dob Z AX3 DRV3 DRV DO5 doy Sp AX4 DRV4 DRV DO6 doz B AX5 DRV5 DRV DO7 dox AX6 DRV6 DRV Permanent syst.assignmt dosp dob doy doz dox Axis X Y Z Sp B DO Variable dox doy doz dosp dob Page 36/50

37 Axis-drive assignment - configuring and diagnosing Calculation using the I/O address or drive number Page 37/50

38 Silent Installation CMC 4.6 The CMC 4.6 can be installed in silent mode. Via an opfile, you can include installation parameters : Command line call for automated installation. Sample call for installation in German: setup.exe /W /L1031 /V"commandline=-OF:OPFILE.txt" The installation directory contains a sample opfile OPFILE.TXT Page 38/50

39 CMC Report CMC Report for project and package Page 39/50

SINUMERIK 810D / 840Di sl / 840D / 840D sl Upgrade Instructions HMI Advanced 7.6 SP1 for PCU 50.3

SINUMERIK 810D / 840Di sl / 840D / 840D sl Upgrade Instructions HMI Advanced 7.6 SP1 for PCU 50.3 HMI Advanced 7.6 SP1 for PCU 50.3 HMI-Advanced 07.06.01.00 (07.60.47.00) for PCU 50.3 6FC5253-7BX10-6AG Installation on the PCU 50.3 Installation of this software requires a PCU 50.3 with PCU base software