Supplement for Administrator Guide KX-HDV130. SIP Phone. Please use this supplement manual together with the latest English Administrator Guide.

Transcription

1 Supplement for Administrator Guide Model o. SIP Phone KX-HDV130 Please use this supplement manual together with the latest English Administrator Guide. Document Version

2 1. Additional Information for Specifying the Server Address 1.1 Basic format Format: name> * The server name (<host>) may be the IP address or the domain. * Maximum length: 384 characters 1.2 Macros used with file names Macro Format {XXXX} Macro Expansion If the URL contains {MAC}, it will be replaced with the {MAC} device s MAC address in uppercase letters. Example: {MAC} 0080F0C571EB If the URL contains {mac}, it will be replaced with the {mac} device s MAC address in lowercase letters. Example: {mac} 0080f0c571eb If the URL contains {MODEL}, it will be replaced with {MODEL} the device s model name. Example: {MODEL} KX-HDV130 If the URL contains {fwver}, it will be replaced with the {fwver} device s firmware version. Example: {fwver} Macros distinguish between uppercase and lowercase letters. Macros not specified above will be treated as strings of characters. 1.3 Target WEB Settings/Configuration Parameters WEB Setting Configuration Parameter DHCP Host ame DHCP_HOST_AME Standard File URL CFG_STADARD_FILE_PATH Product File URL CFG_PRODUCT_FILE_PATH Master File URL CFG_MASTER_FILE_PATH - CFG_ROOT_CERTIFICATE_PATH - CFG_CLIET_CERT_PATH - CFG_PKE_PATH Firmware File URL FIRM_FILE_PATH HTTP User Agent HTTP_USER_AGET - XMPP_ROOT_CERT_PATH - XMPP_CLIET_CERT_PATH - XMPP_PKE_PATH - LDAP_ROOT_CERT_PATH - LDAP_CLIET_CERT_PATH - LDAP_PKE_PATH - LAGUAGE_PATHx - WEB_LAGUAGE_PATHx User Agent SIP_USER_AGET - SIP_TLS_ROOT_CERT_PATH - SIP_TLS_CLIET_CERT_PATH - SIP_TLS_PKE_PATH - POWER_O_DISPLA_LOGO_PATH 2. Additional Information for Specifying the LDAP Server Add "ldap://"or "ldaps://" before the LDAP server address. (Example) LDAP_SERVER="ldap:// "

3 KX HDV130 Software File Version or later VoIP Settings [Line 1] [Line 2] Change the followings in "SRTP Mode" on page 134. (Before) (After) SRTP RTP/SRTP When RTP/SRTP is selected, operation is in RTP mode. SRTP RTP/SRTP RTP/SRTP: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls XML Settings XML_SOFT_KE_AMEx x=1-3 Specifies the name of Soft Key A/B/C assigned to an XML application. Max. 5 characters XML XMLAPP_URL_SOFT_KEx x=1-3 Specifies the URL that is accessed when the Soft Key A/B/C is pressed. Max. 256 characters ("&" may also be used) XMLAPP_URL_FLEX_BUTTOx x=1-2 Specifies the URL that is accessed when the FFx key is pressed. Max. 256 characters ( "&" may also be used.)

4 XSI Settings XSI_PHOEBOOK_CCLIC_ITVL Specifies the interval, in minutes, between periodic checks for updates of the Xsi Directory (Phonebook) files. If this parameter is set to "0", the timing is the same as updating the configuration files XSI_PHOEBOOK_RESC_DURATIO Specifies the time range, in minutes, during which connected units can access the server. Xsi Directory (Phonebook) files will be downloaded at a random time within this range BSD_GROUP_EABLE_n BSD_GROUP_EABLE_1, BSD_GROUP_EABLE_2 Specifies whether to enable or disable the "Group" type for Xsi phonebooks. : Enable BSD_GROUPCOM_EABLE_n BSD_GROUPCOM_EABLE_1, BSD_GROUPCOM_EABLE_2 Specifies whether to enable or disable the "Group Common" type for Xsi phonebooks. : Enable BSD_ETERPRISE_EABLE_n BSD_ETERPRISE_EABLE_1, BSD_ETERPRISE_EABLE_2 Specifies whether to enable or disable the "Enterprise" type for Xsi phonebooks. : Enable

5 BSD_ETERPRISECOM_EABLE_n BSD_ETERPRISECOM_EABLE_1, BSD_ETERPRISECOM_EABLE_2 Specifies whether to enable or disable the "Enterprise Common" type for Xsi phonebooks. : Enable BSD_PERSOAL_EABLE_n BSD_PERSOAL_EABLE_1, BSD_PERSOAL_EABLE_2 Specifies whether to enable or disable the "Personal" type for Xsi phonebooks. : Enable : Disable SRTP Settings Change the followings in "SRTP_COECT_MODE_n" on page 270. (Before) 0: SRTP 1: RTP/SRTP When RTP/SRTP is selected, operation is in RTP mode. (After) 0: SRTP 1: RTP/SRTP 0: Use only SRTP for outgoing and incoming calls. 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls.

6 Flexible Key Settings Change the followings in "FLEX_BUTTO_FACILIT_ACTx" on page 281. (Before) X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_FORWARD (After) X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_FORWARD, X_PAASOIC_IPTEL_APPLICATIO Call Control Settings VM_SUBSCRIBE_SPECIFIC_n VM_SUBSCRIBE_SPECIFIC_1, VM_SUBSCRIBE_SPECIFIC_2 Specifies the defined name of a voice mail box. Max. 32 characters SHARED_STOP_LIE_SEIZE Specifies whether to stop seizing the Shared Call line at the unit side. : Stop seizing the line : Seize the line

7 KX HDV130 Software File Version or later Call Control Add the following WEB setting. Barge in Configuration File Reference Specifies the feature number for performing barging in. 0 4 digits (0 9, *, #) ot stored. UM_PLA_BARGE_I System Settings FWD_DD_MEU_EABLE Specifies whether the "Fwd/DD" setting is displayed in MEU. : Displayed : ot displayed BLOCK_AO_MEU_EABLE Specifies whether the "Block Anonymous" setting is displayed in MEU. : Displayed : ot displayed AO_CALL_MEU_EABLE Specifies whether the "Anonymous Call" setting is displayed in MEU. : Displayed : ot displayed TIME_ZOE_SET_EABLE Specifies whether the "Time Zone" setting is displayed in MEU. : Displayed : ot displayed

8 VM_FUCTIO_EABLE Specifies whether to enable the Voice Mail function. : Enable the Voice Mail function XSI Settings BSD_MULTI_TPE_EABLE Specifies whether you can select the type of Xsi phonebook. : Enable XMPP (UC-OE) Settings UC_USERID_CASE_SESITIVE Specifies whether the authentication ID is case-sensitive when accessing the UC server. : Enable AT Settings EXTERAL_RTP_PORTx x=1-3 Specifies the port number of the router in Static AT status. 0, (only even ports) 0: Disable SIP Settings SIP_REPLACE_EABLE_n SIP_REPLACE_EABLE_1, SIP_REPLACE_EABLE_2 Specifies whether to use "Replaces Header". : Use "Replaces Header" : Do not use "Replaces Header"

9 SIP_IC_IVITE_RTP_MODE_n SIP_IC_IVITE_RTP_MODE_1, SIP_IC_IVITE_RTP_MODE_2 Specifies whether to send RTP after receiving a second IVITE. 0: Start receiving RTP after receiving a second IVITE 1: Start sending/receiving RTP after receiving a second IVITE SIP-TLS Settings SIP_TLS_RADOM_PORT Specifies whether to assign a random port (ephemeral port) number or a static port number. All lines that use SIP-TLS are defined by this parameter. UDP/TCP ports are unaffected by this parameter. : Assign a random TLS port number : Assign a static TLS port number (Refer to SIP_SRC_PORT_n) VQ Report by PUBLISH VQREPORT_SED_OPT_CODEC_EABLE Specifies whether to enable the sending of VQREPORT (SIP-PUBLISH) when the codec is changed. : Send VQREPORT when a change of codec is detected : Send VQREPORT at the end of a conversation VQREPORT_SED_OPT_W_CHAGE Specifies the number of consecutive times the MOS (Mean Opinion Score) value may fall below the threshold value specified by either ALERT_REPORT_MOSQ_CRITICAL or ALERT_REPORT_MOSQ_WARIG before the phone sends VQREPORT. The ALERT_REPORT_TRIGGER setting determines whether ALERT_REPORT_MOSQ_CRITICAL or ALERT_REPORT_MOSQ_WARIG is used as the threshold. 0 5 (The number of consecutive times. 0:Disable) If "2" is specified and the MOS value falls within the threshold 2 consecutive times, VQREPORT is sent. 0

10 Telephone Settings CIP_FROM_EABLE Specifies whether to use the 'FROM' header or the 'PAI' header in CIP(Calling umber Identification Presentation). : Use 'FROM' header : Use 'PAI' header IDLE_DISPLA_TPE Specifies what is shown on the display in standby mode. 0: Off 1: Phone umber 2: Phone umber and ame 3: ame "ame" is the display name for the line. 3 UM_PLA_BARGE_I Web User Interface Reference Specifies the feature number for performing barging in. 0 4 digits (0 9, *, #) Barge in SOFT_KE_LABELx x=1-3 Specifies the text of the soft keys displayed on the screen for quick dialing. This setting is available only when "DISCLOSE_FUCTIO_EABLE" is set to "". Max. 5 characters SOFT_KE_LABEL1: 1 SOFT_KE_LABEL2: 2 SOFT_KE_LABEL3: 3

11 SOFT_KE_QUICK_DIALx x=1-3 Specifies quick-dial numbers to assign to the soft keys. This setting is available only when "DISCLOSE_FUCTIO_EABLE" is set to "". Max. 32 characters BLF_DISPLA_OFF_OUTGOIG Specifies whether to display the phone numbers of BLF keys or PAI after dialing. : Do not display : Display the numbers Call Control Settings FWD_SCHRO_FORCE_DISABLE_n FWD_SCHRO_FORCE_DISABLE_1, FWD_SCHRO_FORCE_DISABLE_2 Specifies whether to synchronize the Call Forward settings in FWD_DD_SCHRO_EABLE_n. : Do not synchronize : Synchronize COF_SERVER_HOLD_EABLE Specifies whether to hold the call when connecting an -party conference. : Hold the call : Do not hold the call

12 KX HDV130 Software File Version or later etwork Status Change the followings in "Setting Mode" on page 74. (Before) (After) Disable LLDP Manual Disable LLDP CDP LLDP/CDP Manual Ethernet Port Settings Add the following WEB setting. Enable CDP Configuration File Reference Selects whether to enable or disable the CDP feature. es o o CDP_EABLE Packet Interval Configuration File Reference Specifies the interval, in seconds, between sending CDP frames CDP_ITERVAL Call Control Add the following WEB setting. Group Call Pickup Configuration File Reference Specifies the feature number for performing group call pickup. 0 4 digits (0 9, *, #) ot stored. UM_PLA_PICKUP_GROUP Private Hold Configuration File Reference Selects whether to enable or disable private hold. es o o PRIVATE_HOLD_EABLE

13 Program Key (o. 1 2) Change the followings in "Type" on page 148. (Before) One Touch Dial BLF Line ACD Wrap Up Call Forward (After) One Touch Dial BLF Line ACD Wrap Up Call Forward Group Call Pickup System Settings CALL_SETTIGS_MEU_EABLE Specifies whether the "Call Settings" setting is displayed in MEU. : Displayed : ot displayed DISCLOSE_FUCTIO_EABLE Specifies whether to disclose functions and some keys for HOTEL telephones. : Enable to disclose DELA_RIG_TIME_n DELA_RIG_TIME_1, DELA_RIG_TIME_2 Specifies the length of time, in seconds, until the unit rings : Disable 0 OFF_HOOK_MOITOR_EABLE Specifies whether to enable or disable the Off-hook Monitor function. : Enable Off-hook Monitor

14 PRIVATE_HOLD_EABLE Web User Interface Reference Specifies whether to enable or disable private hold. : Enable private hold Private Hold COF_OWER_OUT_EABLE Specifies whether to allow the remaining two parties in a three-party conference to continue the conversation if the conference originator leaves the conference call (Unattended Conference). : Enable Unattended Conference : Disable PCAP_EABLE Specifies whether to enable or disable packet capturing using the Wireshark utility (PCAP Remote). : Enable PCAP Remote PCAP_REMOTE_ID Specifies the ID of the IP phone whose packets will be captured using the Wireshark utility (PCAP Remote) characters PCAP_REMOTE_PASS Specifies the password of the IP phone whose packets will be captured using the Wireshark utility (PCAP Remote). 0, 6 64 characters

15 PCAP_REMOTE_PORT Specifies the port of the IP phone to use for capturing packets using the Wireshark utility (PCAP Remote) DTMF_OUT_EABLE Specifies whether received outband DTMF signals are output audibly. : Enable audible outband DTMF CACEL_OPERATIO_MODE Specifies the operation of the [CACEL] button when a line is in use. 0: Cancel the current operation 1: Return to standby mode Ethernet Port Settings CDP_EABLE Web User Interface Reference Specifies whether to enable or disable the CDP feature. : Enable CDP Enable CDP CDP_ITERVAL Web User Interface Reference Specifies the interval, in seconds, between sending CDP frames Packet Interval

16 TR-069 Settings TR069_REGISTERIG Specifies the line status that TR-069 outputs while the line is being registered. Max.16 characters Error TR069_REGISTERED Specifies the line status that TR-069 outputs when the line has been registered. Max.16 characters Registering XML Settings XML_PHOEBOOK_URL Specifies the URL to download the XML phonebook file from. Max.256 characters XML_PHOEBOOK_CCLIC_ITVL Specifies the interval, in minutes, between periodic checks for updates to the XML phonebook. If this parameter is set to "0", the timing is the same as that for updating the configuration files. 0, XML_CURSOR_SKIP_EABLE Selects whether to skip displaying the cursor on line 1 (id=1) of the display on the XML menu. : Enable skipping the cursor display on line 1 (id=1)

17 XMLAPP_URL_REDIAL_KE When the redial key is defined by an XML element, specifies the URL that is accessed when the [REDIAL] key is pressed. Max.256 characters (The ampersand [&] character is available) Call Center Settings UC_HOTELIG_MODE Specifies the Flexible Seating mode. This service allows a guest to use the host's device as his own. 0: Hoteling not supported 1: Hoteling supported 2: Host 3: Guest 0 UC_FLEXIBLESEATIG_ULOCKPI Specifies the unlock PI for Flexible Seating digits SIP Settings SIP_183_TALK_EABLE Specifies whether the unit's sate is "Talking" or "Calling" when it receives a SIP 183 message. : Talking : Calling SRTP Settings DISPLA_SRTP_CALL_EABLE Selects whether an icon is displayed when the unit is using encrypted call mode (SRTP). : Display an icon for encrypted calls : Disable

18 uacsta Settings UACSTA_EABLE_n UACSTA_EABLE_1, UACSTA_EABLE_2 Selects whether to enable or disable the uacsta feature. : Enable : Disable Telephone Settings UM_PLA_PICKUP_GROUP Web User Interface Reference Specifies the feature number for performing group call pickup. 0 4 digits (0 9, *, #) Group Call Pickup Flexible Button Settings Change the followings in "FLEX_BUTTO_FACILIT_ACTx" on page 281. (Before) X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_FORWARD (After) X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_FORWARD, X_PAASOIC_IPTEL_APPLICATIO X_PAASOIC_IPTEL_GROUPPICKUP

19 Call Control Settings DIALPLA_REPLACE_LOG_EABLE Specifies whether to log the number after it was modified by the Dial Plan or the number as it was input. : Log the number in the outgoing call log after it was modified by the Dial Plan : Log the number in the outgoing call log as it was input DIALPLA_MEMOR_DIAL_EABLE Specifies whether to enable Dial Plan processing for memory dialing. : Enable Dial Plan : Disable SIGALIG_AUTO_AS_EABLE_n SIGALIG_AUTO_AS_EABLE_1, SIGALIG_AUTO_AS_EABLE_2 Specifies whether to enable paging mode with "Click to Dial". : Enable Logging Settings SSLOG_OUT_START Specifies whether to enable or disable exporting of the Application Log : Enable export to syslog PQX8313XA PP0316SM2086