Supplement for Administrator Guide KX-HDV330. SIP Phone. Please use this supplement manual together with the latest English Administrator Guide.

Transcription

1 Supplement for Administrator Guide Model o. SIP Phone KX-HDV330 Please use this supplement manual together with the latest English Administrator Guide. Document Version

2 1. Additional Information for Specifying the Server Address 1.1 Basic format Format: name> * The server name (<host>) may be the IP address or the domain. * Maximum length: 384 characters 1.2 Macros used with file names Macro Format {XXXX} Macro Expansion If the URL contains {MAC}, it will be replaced with the {MAC} device s MAC address in uppercase letters. Example: {MAC} 0080F0C571EB If the URL contains {mac}, it will be replaced with the {mac} device s MAC address in lowercase letters. Example: {mac} 0080f0c571eb If the URL contains {MODEL}, it will be replaced with {MODEL} the device s model name. Example: {MODEL} KX-HDV330 If the URL contains {fwver}, it will be replaced with the {fwver} device s firmware version. Example: {fwver} ote Macros distinguish between uppercase and lowercase letters. Macros not specified above will be treated as strings of characters. 1.3 Target WEB Settings/Configuration Parameters WEB Setting Configuration Parameter DHCP Host ame DHCP_HOST_AME Standard File URL CFG_STADARD_FILE_PATH Product File URL CFG_PRODUCT_FILE_PATH Master File URL CFG_MASTER_FILE_PATH - CFG_ROOT_CERTIFICATE_PATH - CFG_CLIET_CERT_PATH - CFG_PKEY_PATH Firmware File URL FIRM_FILE_PATH HTTP User Agent HTTP_USER_AGET - XMPP_ROOT_CERT_PATH - XMPP_CLIET_CERT_PATH - XMPP_PKEY_PATH - LDAP_ROOT_CERT_PATH - LDAP_CLIET_CERT_PATH - LDAP_PKEY_PATH - LAGUAGE_PATHx - WEB_LAGUAGE_PATHx User Agent SIP_USER_AGET - SIP_TLS_ROOT_CERT_PATH - SIP_TLS_CLIET_CERT_PATH - SIP_TLS_PKEY_PATH - POWER_O_DISPLAY_LOGO_PATH 2. Additional Information for Specifying the LDAP Server Add "ldap://"or "ldaps://" before the LDAP server address. (Example) LDAP_SERVER="ldap:// "

3 KX HDV330 Software File Version or later Import Display File Correct the following description on page 117 This screen allows you to specify the file of the wallpaper to import. This screen allows you to specify the file of the screen saver to import. Correct the followings in " Import Display File" on page 117 Specifies the file of the wallpaper to import. Specifies the file of the screen saver to import Wait Time Correct the following description on page 118 This screen allows you to specify the time to wait for the wallpaper to display. This screen allows you to specify the time to wait for the screen saver to display. Correct the followings in " Wait Time" on page 118 Specifies the time, in seconds, to wait for the wallpaper to display. Specifies the time, in seconds, to wait for the screen saver to display VoIP Settings [Line 1] [Line 12] Change the followings in " SRTP Mode " on page 136 SRTP RTP/SRTP ote When RTP/SRTP is selected, operation is in RTP mode. SRTP RTP/SRTP ote RTP/SRTP: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls.

4 System Settings SYS_HOME_MEU_ICOx X=1-20 Specifies an arrangement of the icons on the Home menu. 0: Original position 1: one 2: Function 3: Phonebook 4: Call History 5: Voice Message 6: FWD/DD 7: Application 8: Basic Settings 9: System Settings 10: Advanced Settings 11: Line Status 12: Presence 13: Call Center/Call Centre 14: Paging 17: XML shortcut1 18: XML shortcut2 19: XML shortcut3 20: XML shortcut4 21: XML shortcut5 22: XML shortcut6 0 Location numbers (x=1 20) of the icons on the Home menu. Page 1 Page 2 Page 3

5 XML Settings XMLAPP_URL_FLEX_BUTTOx STRIG x=1 24 Specifies the URL that is accessed when the FFx key is pressed. Max. 256 characters ("&" may also be used) Empty string SYS_HOME_MEU_XML_AMEx STRIG x=1-6 Specifies the name of an icon for an XML feature on the Home menu. Max. 24 characters x=1:application x=2:application x=3:application x=4:application x=5:application x=6:application SYS_HOME_MEU_XML_URLx STRIG x=1-6 Specifies the URL that is accessed by an XML feature on the Home menu. Max. 256 characters ( "&" may also be used.) Empty string SYS_HOME_MEU_XML_ICOx x=1-6 Specifies feature of an icon on the Home menu Icon Type ote o.12, 16, 20 29: Blank

6 XSI Settings XSI_PHOEBOOK_CYCLIC_ITVL Specifies the interval, in minutes, between periodic checks for updates of the Xsi Directory (Phonebook) files. If this parameter is set to "0", the timing is the same as updating the configuration files XSI_PHOEBOOK_RESYC_DURATIO Specifies the time range, in minutes, during which connected units can access the server. Xsi Directory (Phonebook) files will be downloaded at a random time within this range BSD_GROUP_EABLE_n Parameter ame Example BSD_GROUP_EABLE_1, BSD_GROUP_EABLE_2,,BSD_GROUP_EABLE_12 Specifies whether to enable or disable the "Group" type for Xsi phonebooks. Y: Enable : Disable BSD_GROUPCOM_EABLE_n Parameter ame Example BSD_GROUPCOM_EABLE_1, BSD_GROUPCOM_EABLE_2,,BSD_GROUPCOM_EABLE_12 Specifies whether to enable or disable the "Group Common" type for Xsi phonebooks. Y: Enable : Disable

7 BSD_ETERPRISE_EABLE_n Parameter ame Example BSD_ETERPRISE_EABLE_1, BSD_ETERPRISE_EABLE_2,,BSD_ETERPRISE_EABLE_12 Specifies whether to enable or disable the "Enterprise" type for Xsi phonebooks. Y: Enable : Disable BSD_ETERPRISECOM_EABLE_n Parameter ame Example BSD_ETERPRISECOM_EABLE_1, BSD_ETERPRISECOM_EABLE_2,,BSD_ETERPRISECOM_EABLE_12 Specifies whether to enable or disable the "Enterprise Common" type for Xsi phonebooks. Y: Enable : Disable BSD_PERSOAL_EABLE_n Parameter ame Example BSD_PERSOAL_EABLE_1, BSD_PERSOAL_EABLE_2,,BSD_PERSOAL_EABLE_12 Specifies whether to enable or disable the "Personal" type for Xsi phonebooks. Y: Enable : Disable SRTP Settings Change the followings in " SRTP_COECT_MODE_n " on page 277 0: SRTP 1: RTP/SRTP ote When RTP/SRTP is selected, operation is in RTP mode. 0: SRTP 1: RTP/SRTP 2: RTP&SRTP (Panasonic PBX only) ote 0: Use only SRTP for outgoing and incoming calls. 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls. 2: Use RTP or SRTP for both outgoing and incoming calls. This value is valid only when the unit is connected to a Panasonic PBX. "SRTP_MIX_TRASFER_EABLE_n" must also be set to "Y".

8 Flexible Key Settings Change the followings in " FLEX_BUTTO_FACILITY_ACTx " on page 288 X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_LIESTATUS, X_PAASOIC_IPTEL_FORWARD, X_PAASOIC_IPTEL_PHOEBOOK, X_PAASOIC_IPTEL_CALLLOG, X_PAASOIC_IPTEL_PARARIG, X_PAASOIC_IPTEL_HOTELIG, X_PAASOIC_IPTEL_TRASFER, X_PAASOIC_IPTEL_BLIDTRASFER, X_PAASOIC_IPTEL_COFERECE, X_PAASOIC_IPTEL_DIRECTPICKUP, X_PAASOIC_IPTEL_CALLPARK, X_PAASOIC_IPTEL_PARKRETRIEVE X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_LIESTATUS, X_PAASOIC_IPTEL_FORWARD, X_PAASOIC_IPTEL_PHOEBOOK, X_PAASOIC_IPTEL_CALLLOG, X_PAASOIC_IPTEL_PARARIG, X_PAASOIC_IPTEL_HOTELIG, X_PAASOIC_IPTEL_TRASFER, X_PAASOIC_IPTEL_BLIDTRASFER, X_PAASOIC_IPTEL_COFERECE, X_PAASOIC_IPTEL_DIRECTPICKUP, X_PAASOIC_IPTEL_CALLPARK, X_PAASOIC_IPTEL_PARKRETRIEVE, X_PAASOIC_IPTEL_APPLICATIO

9 DSS Key Settings Change the followings in " DSS_BUTTO_FACILITY_ACTx " on page 290 X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_LIESTATUS, X_PAASOIC_IPTEL_FORWARD, X_PAASOIC_IPTEL_PHOEBOOK, X_PAASOIC_IPTEL_CALLLOG, X_PAASOIC_IPTEL_PARARIG, X_PAASOIC_IPTEL_HOTELIG, X_PAASOIC_IPTEL_TRASFER, X_PAASOIC_IPTEL_BLIDTRASFER, X_PAASOIC_IPTEL_COFERECE, X_PAASOIC_IPTEL_DIRECTPICKUP, X_PAASOIC_IPTEL_CALLPARK, X_PAASOIC_IPTEL_PARKRETRIEVE X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_LIESTATUS, X_PAASOIC_IPTEL_FORWARD, X_PAASOIC_IPTEL_PHOEBOOK, X_PAASOIC_IPTEL_CALLLOG, X_PAASOIC_IPTEL_PARARIG, X_PAASOIC_IPTEL_HOTELIG, X_PAASOIC_IPTEL_TRASFER, X_PAASOIC_IPTEL_BLIDTRASFER, X_PAASOIC_IPTEL_COFERECE, X_PAASOIC_IPTEL_DIRECTPICKUP, X_PAASOIC_IPTEL_CALLPARK, X_PAASOIC_IPTEL_PARKRETRIEVE, X_PAASOIC_IPTEL_APPLICATIO Call Control Settings VM_SUBSCRIBE_SPECIFIC_n Parameter ame Example VM_SUBSCRIBE_SPECIFIC_1, VM_SUBSCRIBE_SPECIFIC_2,..., VM_SUBSCRIBE_SPECIFIC_12 STRIG Specifies the defined name of a voice mail box. Max. 32 characters Empty string SHARED_STOP_LIE_SEIZE Specifies whether to stop seizing the line of the Shared Call at the unit side or not. Y: Stop seizing line : Seize line

10 KX HDV330 Software File Version or later Call Control Add the following WEB setting. Barge in Configuration File Reference Specifies the feature number for performing barging in. 0 4 digits (0 9, *, #) ot stored. UM_PLA_BARGE_I System Settings FWD_DD_MEU_EABLE Specifies whether the "Fwd/DD" setting is displayed in MEU. Y: Displayed : ot displayed Y BLOCK_AOY_MEU_EABLE Specifies whether the "Block Anonymous" setting is displayed in MEU. Y: Displayed : ot displayed Y AOY_CALL_MEU_EABLE Specifies whether the "Anonymous Call" setting is displayed in MEU. Y: Displayed : ot displayed Y TIME_ZOE_SET_EABLE Specifies whether the "Time Zone" setting is displayed in MEU. Y: Displayed : ot displayed

11 DISPLAY_CALL_KEY_EABLE Specifies whether call information is displayed on Line and BLF program/dss keys. Y: Displayed : ot displayed LCD_SCREE_TIMEOUT Specifies the length of time before the LCD backlight turns off when the unit is idle. 0: 30sec 1: 1min 2: 5min 3: 10min 4: 30min 5: 60min 6: 120min 7: 180min 8: 300min 9: Always On 1 LCD_ACTIVE_LEVEL Specifies the backlight level of the LCD when it is active LCD_IACTIVE_LEVEL Specifies the backlight level of the LCD when it is inactive. 0: Off 1: Low 0 DSS_LCD_ACTIVATIO Specifies the activation of the backlight of DSS units' LCD. 0: Off 1: On 2: Auto 2 DSS_LCD_BACKLIGHT Specifies the backlight level of DSS units' LCD

12 DSS_LCD_COTRAST Specifies the contrast level of DSS units' LCD XSI Settings BSD_MULTI_TYPE_EABLE Specifies whether you can select the type of Xsi phonebook. Y: Enable : Disable XMPP (UC-OE) Settings UC_USERID_CASE_SESITIVE Specifies whether the authentication ID is case-sensitive when accessing the UC server. Y: Enable : Disable AT Settings EXTERAL_RTP_PORTx x=1-24 Specifies the port number of the router in Static AT status. 0, (only even ports) 0: Disable SIP Settings SIP_REPLACE_EABLE_n Parameter ame Example SIP_REPLACE_EABLE_1, SIP_REPLACE_EABLE_2,, SIP_REPLACE_EABLE_12 Specifies whether to use "Replaces Header". Y: Use "Replaces Header" : Do not use "Replaces Header" Y

13 SIP_IC_IVITE_RTP_MODE_n Parameter ame Example SIP_IC_IVITE_RTP_MODE_1, SIP_IC_IVITE_RTP_MODE_2,, SIP_IC_IVITE_RTP_MODE_12 Specifies whether to send RTP after receiving a second IVITE. 0: Start receiving RTP after receiving a second IVITE 1: Start sending/receiving RTP after receiving a second IVITE SIP-TLS Settings SIP_TLS_RADOM_PORT Specifies whether to assign a random port (ephemeral port) number or a static port number. ote All lines that use SIP-TLS are defined by this parameter. UDP/TCP ports are unaffected by this parameter. Y: Assign a random TLS port number : Assign a static TLS port number (Refer to SIP_SRC_PORT_n) Y VQ Report by PUBLISH VQREPORT_SED_OPT_CODEC_EABLE Specifies whether to enable the sending of VQREPORT (SIP-PUBLISH) when the codec is changed. Y: Send VQREPORT when a change of codec is detected : Send VQREPORT at the end of a conversation VQREPORT_SED_OPT_W_CHAGE Specifies the number of consecutive times the MOS (Mean Opinion Score) value may fall below the threshold value specified by either ALERT_REPORT_MOSQ_CRITICAL or ALERT_REPORT_MOSQ_WARIG before the phone sends VQREPORT. The ALERT_REPORT_TRIGGER setting determines whether ALERT_REPORT_MOSQ_CRITICAL or ALERT_REPORT_MOSQ_WARIG is used as the threshold. 0 5 (The number of consecutive times. 0:Disable) ote If "2" is specified and the MOS value falls within the threshold 2 consecutive times, VQREPORT is sent. 0

14 Telephone Settings WALLPAPER_WAIT_TIME Web User Interface Reference Specifies the time, in seconds, to wait for the screen saver to display. 0 (Do not display the screen saver) Wait Time CIP_FROM_EABLE Specifies whether to use the 'FROM' header or the 'PAI' header in CIP (Calling umber Identification Presentation). Y: Use 'FROM' header : Use 'PAI' header IDLE_DISPLAY_TYPE Specifies what is shown on the display in standby mode. 0: Off 1 :Phone umber 2: Phone umber and ame 3: ame ote "ame" is the display name for the line. 3 UM_PLA_BARGE_I Web User Interface Reference STRIG Specifies the feature number for performing barging in. 0 4 digits (0 9, *, #) Empty string Barge in BLF_DISPLAY_OFF_OUTGOIG Specifies whether to display the phone numbers of BLF keys or PAI after dialing. Y: Do not display : Display the phone numbers

15 SPLIT_HOLD_TRS_EABLE Specifies whether to enable the Call Split feature by pressing the HOLD key while a call is either on transfer hold or conference hold. Y: Enable the Call Split feature by using the HOLD key : Disable FWD_SYCHRO_FORCE_DISABLE_n Parameter ame Example FWD_SYCHRO_FORCE_DISABLE_1, FWD_SYCHRO_FORCE_DISABLE_2,, FWD_SYCHRO_FORCE_DISABLE_12 Specifies whether to synchronize the Call Forward settings in FWD_DD_SYCHRO_EABLE_n. Y: Do not synchronize : Synchronize COF_SERVER_HOLD_EABLE Specifies whether to hold the call when connecting an -party conference. Y: Hold the call : Do not hold the call

16 KX HDV330 Software File Version or later etwork Status Change the followings in " Setting Mode " on page 74. Disable LLDP Manual Disable LLDP CDP LLDP/CDP Manual Ethernet Port Settings Add the following WEB setting. Enable CDP Configuration File Reference Selects whether to enable the CDP feature. Yes o o CDP_EABLE Packet Interval Configuration File Reference Specifies the interval, in seconds, between sending CDP frames CDP_ITERVAL Call Control Add the following WEB setting. Group Call Pickup Configuration File Reference Specifies the feature number for performing group call pickup. 0 4 digits (0 9, *, #) ot stored. UM_PLA_PICKUP_GROUP Private Hold Configuration File Reference Selects whether to enable or disable private hold. Yes o o PRIVATE_HOLD_EABLE

17 Flexible Key Settings (o. 1 24) Change the followings in " Type" on page 149. One Touch Dial BLF Line ACD Wrap Up Line Status Call Forward Phonebook Call History Simultaneous Ring Hoteling (Hospitality) Transfer Blind Transfer Conference Directed Call Pickup Call Park Call Park Retrieve One Touch Dial BLF Line ACD Wrap Up Line Status Call Forward Phonebook Call History Simultaneous Ring Hoteling (Hospitality) Transfer Blind Transfer Conference Directed Call Pickup Call Park Call Park Retrieve Group Call Pickup

18 DSS Console Change the followings in " Type" on page 158. One Touch Dial BLF Line ACD Wrap Up Line Status Call Forward Phonebook Call History Simultaneous Ring Hoteling (Hospitality) Transfer Blind Transfer Conference Directed Call Pickup Call Park Call Park Retrieve One Touch Dial BLF Line ACD Wrap Up Line Status Call Forward Phonebook Call History Simultaneous Ring Hoteling (Hospitality) Transfer Blind Transfer Conference Directed Call Pickup Call Park Call Park Retrieve Group Call Pickup

19 System Settings AUTO_IPUT_KEY_TIME Specifies the number of seconds after which the cursor automatically moves to the next position during character input. 0 3 [0: off] 0 START_DIAL_POUD_KEY Specifies whether to send the dialed number when the '#' key is pressed during pre-dialing. Y: Enable dialing by using '#' : Disable CALL_SETTIGS_MEU_EABLE Specifies whether the "Call Settings" setting is displayed in MEU. Y: Displayed : ot displayed Y DELAY_RIG_TIME_n Parameter ame Example DELAY_RIG_TIME_1, DELAY_RIG_TIME_2,,DELAY_RIG_TIME_12 Specifies the length of time, in seconds, until the unit rings : Disable 0 OFF_HOOK_MOITOR_EABLE Specifies whether to enable or disable the Off-hook Monitor function. Y: Enable Off-hook Monitor : Disable Y

20 PRIVATE_HOLD_EABLE Web User Interface Reference Specifies whether to enable or disable private hold. Y: Enable private hold : Disable Private Hold COF_OWER_OUT_EABLE Specifies whether to allow the remaining two parties in a three-party conference to continue the conversation if the conference originator leaves the conference call (Unattended Conference). Y: Enable Unattended Conference : Disable PCAP_EABLE Specifies whether to enable or disable packet capturing using the Wireshark utility (PCAP Remote). Y: Enable PCAP Remote : Disable PCAP_REMOTE_ID STRIG Specifies the ID of the IP phone whose packets will be captured using the Wireshark utility (PCAP Remote) characters Empty string PCAP_REMOTE_PASS STRIG Specifies the password of the IP phone whose packets will be captured using the Wireshark utility (PCAP Remote). 0, 6 64 characters Empty string PCAP_REMOTE_PORT Specifies the port of the IP phone to use for capturing packets using the Wireshark utility (PCAP Remote)

21 DTMF_OUT_EABLE Specifies whether received outband DTMF signals are output audibly. Y: Enable audible outband DTMF : Disable Y CACEL_OPERATIO_MODE Specifies the operation of the [CACEL] button when a line is in use. 0: Cancel the current operation 1: Return to standby mode Ethernet Port Settings CDP_EABLE Web User Interface Reference Specifies whether to enable the CDP feature. Y: Enable CDP : Disable Enable CDP CDP_ITERVAL Web User Interface Reference Specifies the interval, in seconds, between sending each CDP frames Packet Interval

22 XML Settings XML_PHOEBOOK_URL STRIG Specifies the URL to download the XML phonebook file from. Max.256 characters Empty string XML_PHOEBOOK_CYCLIC_ITVL Specifies the interval, in minutes, between periodic checks for updates to the XML phonebook. If this parameter is set to "0", the timing is the same as that for updating the configuration files. 0, XML_CURSOR_SKIP_EABLE Selects whether to skip displaying the cursor on line 1 (id=1) of the display on the XML menu. Y: Enable skipping the cursor display on line 1 (id=1) : Disable XMLAPP_URL_REDIAL_KEY STRIG When the redial key is defined by an XML element, specifies the URL that is accessed when the [REDIAL] key is pressed. Max.256 characters (The ampersand [&] character is available) Empty string

23 Call Center Settings UC_HOTELIG_MODE Specifies the Flexible Seating mode. This service allows a guest to use the host's device as his own. 0: Hoteling not supported 1: Hoteling supported 2: Host 3: Guest 0 UC_FLEXIBLESEATIG_ULOCKPI STRIG Specifies the unlock PI for Flexible Seating digits Empty string SIP Settings SIP_183_TALK_EABLE Specifies whether the unit's sate is "Talking" or "Calling" when it receives a SIP 183 message. Y: Talking : Calling SRTP Settings DISPLAY_SRTP_CALL_EABLE Selects whether an icon is displayed when the unit is using encrypted call mode (SRTP). Y: Display an icon for encrypted calls : Disable

24 uacsta Settings UACSTA_EABLE_n Parameter ame Example UACSTA_EABLE_1, UACSTA_EABLE_2,,UACSTA_EABLE_12 Selects whether to enable or disable the uacsta feature. Y: Enable : Disable Telephone Settings UM_PLA_PICKUP_GROUP Web User Interface Reference STRIG Specifies the feature number for performing group call pickup. 0 4 digits (0 9, *, #) Empty string Group Call Pickup

25 Flexible Key Settings Change the followings in " FLEX_BUTTO_FACILITY_ACTx " on page 288 X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_LIESTATUS, X_PAASOIC_IPTEL_FORWARD, X_PAASOIC_IPTEL_PHOEBOOK, X_PAASOIC_IPTEL_CALLLOG, X_PAASOIC_IPTEL_PARARIG, X_PAASOIC_IPTEL_HOTELIG, X_PAASOIC_IPTEL_TRASFER, X_PAASOIC_IPTEL_BLIDTRASFER, X_PAASOIC_IPTEL_COFERECE, X_PAASOIC_IPTEL_DIRECTPICKUP, X_PAASOIC_IPTEL_CALLPARK, X_PAASOIC_IPTEL_PARKRETRIEVE X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_LIESTATUS, X_PAASOIC_IPTEL_FORWARD, X_PAASOIC_IPTEL_PHOEBOOK, X_PAASOIC_IPTEL_CALLLOG, X_PAASOIC_IPTEL_PARARIG, X_PAASOIC_IPTEL_HOTELIG, X_PAASOIC_IPTEL_TRASFER, X_PAASOIC_IPTEL_BLIDTRASFER, X_PAASOIC_IPTEL_COFERECE, X_PAASOIC_IPTEL_DIRECTPICKUP, X_PAASOIC_IPTEL_CALLPARK, X_PAASOIC_IPTEL_PARKRETRIEVE, X_PAASOIC_IPTEL_APPLICATIO X_PAASOIC_IPTEL_GROUPPICKUP

26 DSS Key Settings Change the followings in " DSS_BUTTO_FACILITY_ACTx " on page 290 X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_LIESTATUS, X_PAASOIC_IPTEL_FORWARD, X_PAASOIC_IPTEL_PHOEBOOK, X_PAASOIC_IPTEL_CALLLOG, X_PAASOIC_IPTEL_PARARIG, X_PAASOIC_IPTEL_HOTELIG, X_PAASOIC_IPTEL_TRASFER, X_PAASOIC_IPTEL_BLIDTRASFER, X_PAASOIC_IPTEL_COFERECE, X_PAASOIC_IPTEL_DIRECTPICKUP, X_PAASOIC_IPTEL_CALLPARK, X_PAASOIC_IPTEL_PARKRETRIEVE X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_LIESTATUS, X_PAASOIC_IPTEL_FORWARD, X_PAASOIC_IPTEL_PHOEBOOK, X_PAASOIC_IPTEL_CALLLOG, X_PAASOIC_IPTEL_PARARIG, X_PAASOIC_IPTEL_HOTELIG, X_PAASOIC_IPTEL_TRASFER, X_PAASOIC_IPTEL_BLIDTRASFER, X_PAASOIC_IPTEL_COFERECE, X_PAASOIC_IPTEL_DIRECTPICKUP, X_PAASOIC_IPTEL_CALLPARK, X_PAASOIC_IPTEL_PARKRETRIEVE, X_PAASOIC_IPTEL_APPLICATIO X_PAASOIC_IPTEL_GROUPPICKUP

27 Call Control Settings DIALPLA_REPLACE_LOG_EABLE Specifies whether to log the number after it was modified by the Dial Plan or the number as it was input. Y: Log the number in the outgoing call log after it was modified by the Dial Plan : Log the number in the outgoing call log as it was input Y DIALPLA_MEMORY_DIAL_EABLE Specifies whether to enable Dial Plan processing for memory dialing. Y: Enable Dial Plan : Disable Y SIGALIG_AUTO_AS_EABLE_n Parameter ame Example SIGALIG_AUTO_AS_EABLE_1, SIGALIG_AUTO_AS_EABLE_2,, SIGALIG_AUTO_AS_EABLE_12 Specifies whether to enable paging mode with "Click to Dial". Y: Enable : Disable Y Logging Settings SYSLOG_OUT_START Specifies whether to enable or disable exporting of the Application Log Y: Enable export to syslog : Disable

28 KX HDV330 Software File Version or later VoIP Settings [Line 1] [Line 12] Change the in " SRTP Mode " on page 136. SRTP RTP/SRTP ote When RTP/SRTP is selected, operation is in RTP mode. 0:SRTP 1:RTP/SRTP 2:Panasonic Original 3:SRTP/RTP ote 0: Use only SRTP for outgoing and incoming calls. 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls. 2: Use RTP or SRTP for both outgoing and incoming calls. This value is valid only when the unit is connected to a Panasonic PBX. "SRTP_MIX_TRASFER_EABLE_n" mustalso be set to "Y". 3: If you are using "RTP/AVP" and append "a=crypto", and the response message includes "a=crypto", the conversation will be established with SRTP. If "a=crypto" is not included, the conversation will be established with RTP Call Control Add the following WEB setting. Missed Call otification - Message Configuration File Reference Selects whether to display 'Missed calls' on the screen in standby mode. Yes o Yes OTIFY_MISSEDCALL_EABLE Missed Call otification - LED Configuration File Reference Selects whether the LED is used to indicate a missed call Yes o Yes OTIFY_MISSEDCALL_LED_EABLE Voice Message otification - Message Configuration File Reference Selects whether to display 'Voice MSG' on the screen in standby mode. Yes o Yes OTIFY_VOIC _EABLE

29 Voice Message otification - LED Configuration File Reference Selects whether the LED is used to indicate a new voice message. Yes o Yes OTIFY_VOIC _LED_EABLE Voice Message otification - Alarm Configuration File Reference Selects whether an alarm sound is used to indicate a new voice message. Yes o Yes OTIFY_VOIC _ALARM_EABLE Flexible Key Settings (o. 1 24) Change the in " Parameter" on page 150. Max. 35 characters Max. 128 characters DSS Console Change the in " Parameter" on page 159. Max. 35 characters Max. 128 characters System Settings OTIFICATIO_MEU_EABLE Specifies whether to display the notification settings under MEU. Y: Display the notification settings : Do not display Y OTIFY_MISSEDCALL_EABLE Web User Interface Reference Specifies whether to display 'Missed calls' on the screen in standby mode. Y: Enable displaying 'Missed calls' in standby mode. : Disable Y Missed Call otification - Message

30 OTIFY_VOIC _EABLE Web User Interface Reference Specifies whether to display 'Voice MSG' on the screen in standby mode. Y: Enable displaying 'Voice MSG' in standby mode. : Disable Y Voice Message otification - Message ECO_MODE_MEU_EABLE Specifies whether the "ECO mode" setting is displayed under MEU. Y: Enable displaying the ECO mode function under MEU. : Disable Y OTIFY_MISSEDCALL_LED_EABLE Web User Interface Reference Specifies whether the LED is used to indicate a missed call Y: Enable LED indication for a missed call. : Disable Y Missed Call otification - LED OTIFY_VOIC _LED_EABLE Web User Interface Reference Specifies whether the LED is used to indicate a missed call Y: Enable LED indication for a missed call. : Disable Y Voice Message otification - LED OTIFY_VOIC _ALARM_EABLE Web User Interface Reference Specifies whether the LED is used to indicate a new voice message. Y: Enable LED indication for voice messages. : Disable Y Voice Message otification - Alarm

31 OTIFICATIO_ALARM_TYPE Specifies whether a voice mail alarm notification is used only the first time or every time. 0: First time only 1: Every time 0 BOOTLOG_SERVER_URI STRIG Specifies the URI for a boot logging server. Max. 256 characters Empty string TR-069 Settings TR069_REGISTERIG STRIG Specifies the line status that TR-069 outputs while the line is being registered. Max.16 characters Error TR069_REGISTERED STRIG Specifies the line status that TR-069 outputs when the line has been registered. Max.16 characters Registering etwork Phonebook (Common) W_PHOEBOOK_ADVACED_SERACH Specifies whether to perform a narrowing search with the LDAP phonebook. Y: Enable : Disable

32 SIP Settings SED_180_ALERT_EABLE Specifies whether to send 180 before an alert. Y: Send 180 : Do not send SRTP Settings Change the in " SRTP_COECT_MODE_n " on page : SRTP 1: RTP/SRTP ote 0: Use only SRTP for outgoing and incoming calls. 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls. 0: SRTP 1: RTP/SRTP 2: SRTP & RTP (Panasonic PBX only) 3: SRTP & RTP (RTP/AVP, a=crypto) ote 0: Use only SRTP for outgoing and incoming calls. 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls. 2: Use RTP or SRTP for both outgoing and incoming calls. This value is valid only when the unit is connected to a Panasonic PBX. "SRTP_MIX_TRASFER_EABLE_n" mustalso be set to "Y". 3: If you are using "RTP/AVP" and append "a=crypto", and the response message includes "a=crypto", the conversation will be established with SRTP. If "a=crypto" is not included, the conversation will be established with RTP Telephone Settings CALLPARK_METHOD Specifies the method for the "Call Park" function. 1: Info message type 2: Refer type 2 CALL_PARK_PROG_KEY_MODE Specifies the Call Park operation when it is assigned to a function key. 0: umbering plan 1: Specified park area with "CALLPARK_METHOD". 0

33 Flexible Button Settings Change the in "FLEX_BUTTO_FACILITY_ARGx" on page 289. Max. 35 characters Max. 128 characters DSS Key Settings Change the in "DSS_BUTTO_FACILITY_ARGx" on page 291. Max. 35 characters Max. 128 characters

34 KX HDV330 Software File Version or later TWAMP Settings Add the TWAMP Settings to the [etwork] tab of Web User Interface Programming. Add the following web settings to the TWAMP settings. Enable TWAMP Configuration File Reference Selects whether to enable the TWAMP server function. Yes o o TWAMP_EABLE Control Port Configuration File Reference Specifies the port for the TWAMP control session TWAMP_COTROL_PORT Test Port Configuration File Reference Specifies the port for the TWAMP test session TWAMP_TEST_PORT Wait Time for Control Configuration File Reference Specifies the time, in seconds, for the TWAMP server to wait for incoming packets for maintaining the session TWAMP_SERVER_WAIT_TIME Wait Time for Reflector Configuration File Reference Specifies the time, in seconds, for the TWAMP reflector to wait for incoming packets for maintaining the session TWAMP_REFLECTOR_WAIT_TIME

35 System Settings DISPLAY_DIVERSIO_EABLE Specifies whether the "Diversion" call information is displayed when receiving an incoming call. Y: Enable displaying the "Diversion" information : Disable TWAMP Settings Add the TWAMP Settings to Configuration File Programming. Add the following configuration parameter to the TWAMP settings. TWAMP_EABLE Web User Interface Reference Specifies whether to enable the TWAMP server function. Y: Enable the TWAMP server function. : Disable Enable TWAMP TWAMP_COTROL_PORT Web User Interface Reference Specifies the port for the TWAMP control session Control Port TWAMP_TEST_PORT Web User Interface Reference Specifies the port for the TWAMP test session Test Port TWAMP_SERVER_WAIT_TIME Web User Interface Reference Specifies the time, in seconds, for the TWAMP server to wait for incoming packets for maintaining the session Wait Time for Control

36 TWAMP_REFLECTOR_WAIT_TIME Web User Interface Reference Specifies the time, in seconds, for the TWAMP reflector to wait for incoming packets for maintaining the session Wait Time for Reflector TWAMP_PADDIG_ZERO Specifies the packet padding for the TWAMP test session. Y: All zeros : Random PQX8315VA PP0316SM4116