Import Collection Data from TEMS Pocket into ibwave Design.

Transcription

1 Import Collection Data from TEMS Pocket into ibwave Design. A. Export ibwave compatible data from TEMS Pocket using TEMS Discovery. B. Import data into ibwave Design. A. Export ibwave compatible data from TEMS Pocket using TEMS Discovery. Collection data from TEMS Pocket is in a zipped folder. This folder contains the following types of files: 1. Open TEMS Discovery 2. Click on Next drop down icon and select Import Drive Test Data 3. The following window appears.

2 4. Import the zipped folder containing collection data. 5. After clicking on the import button above, the status can be seen in the Task window.

3 6. If the import is successful, project name will appear in the Project List pane window. 7. Double click on project name (FIS in above example), following window appears.

4 8. Go to GIS/Coverage Map and observe that Floor Prints has unspecified address. 9. Right click on the file under unspecified address and select Rectify (Georefrence) Floor Print

5 10. Floor Print rectifier window opens where we can specify three points on the floor image file for geo-coding. 11. Type in the address to locate the building in consideration and then click on button. Address pops up in Google search box and click on Find address. 12. Ensure orientation of building in Google Earth is same as the image file.

6 13. Click on a point on image file (preferably corner of building) and then click on corresponding point in Google Map window. Click on update 1 st mapping. 14. Repeat the above step for two other points and you will notice on top right corner, image X,Y coordinates will have corresponding longitude and latitude information filled.

7 15. Click on save and close the window. Note that unspecified address has a name now. 16. Click on Export Geo-rectified Floor Print and save the file. A MapInfo tab file will be created.

8 17. Now the data has to be exported. In TEMS Discovery, Got to Dataset tab. Right-click on the desired data to be exported and select the option Send to Table View 18. Observe that data is geo-coded. Save the data to excel. 19. Save the file as.csv in Microsoft Excel. Now both data file and tab file can be imported in ibwave Design.

9 B. Import data into ibwave Design. IBwave Design supports importing collected data through plain text files where data is separated by configurable delimiters. For the data to be imported in ibwave design it must have at least three required fields: - Latitude, Longitude and Numerical data. You can add survey/collection data to a layout plan in ibwave Design by the following Procedure: 1) Select the Import survey data button from the Survey panel in ibwave Design. 2) Survey Data import window opens up as shown below:

10 3) Import the files i. Under "Input files", click the ellipsis button adjacent to the Data file (.csv,.txt, etc.) box. Select a data file, and click Open ii. Click the ellipsis button adjacent to the MapInfo coordinates mapping file (*.tab) box. Select the corresponding TAB file, and click Open. (Image and TAB files must be located in the same folder; otherwise, coordinates cannot be mapped.) If a Layout Plan image was not loaded, select Use Tab image as plan background image to insert a background image. Note: In case MapInfo TAB file is unavailable, only data file can be imported. However, trace might need to be re-adjusted manually on the layout plan.

11 4) Settings Tab i. Select a Technology and ensure that appropriate separator is selected. Comma is selected as Delimiter separating fields. 5) Select data types to import i. Click on Columns assignations & preview tab. You must assign Latitude, Longitude and at least one numerical data point to import the collection/survey data. Optionally, you can also assign a time stamp.

12 ii. Right click on a column heading to import X(Longitude), Y(Latitude) and at least one Numerical data field as shown below: iii. Select OK and the plan and collected data points will load into the Layout Plan.

13