SOYAL AR-725 (E-V2) V Contents AR-725 (E-V2-M) Installation AR-725 (E-V2-M) AR-725 (E-V2) AR-725 (X) Parts Description AR-725 (E-V2) AR-725 (X)
|
|
- Marsha Elliott
- 6 years ago
- Views:
Transcription
1 SOYAL ACCESS CONTROL SYSTEM AR- (E-V) V0 Contents AR- (E-V-M) Products User Guide Terminal Cables Tools P P P c x d x A. B. C. D. P P P P AR- (E-V) Products User Guide Terminal Cables Tools P P P e x A. E. F. P P P P AR- (X) Products Tools a x d x A. A. Parts Description a. Button Head Pozidriv Tapping Screw: Mx0 d. Security Torx Screw: e. M.x Installation AR- (E-V-M) c. C. A. AR- (E-V) AR- (X) B. F. B. A. B. C. f. A. E. e. C. G. H. D. F. A. b. Button Head Pozidriv c. Slotting Screw:.x0 B. D. Flat Head Hex Socket Screw: Mx A. g. d. C. b x c x Flat Head Cap Philips Tapping Screw: x9. Pull the cables from the square access hole of the mounting plate C. Use a screwdriver to screw the metal plate C to the wall. Take off the plastic mounting plate B from the body A, and pull the cables through the access hole of C and B, then connect to the body A. Assemble plate B with the body A, and embed the water proof strip D onto the plastic side frame. Assemble the body A onto the mounting plate C with the Allen key and screws (accessories supplied). Turn on the power and LED will light and beep will sound. Use a screwdriver to screw the base F onto the wall. Attach the water proof gasket to the body A, and pull the cables from the square hole of the base F, and connect to the body A. Assemble the body A with the base F. Screw A and F tight with the Allen key and screws (accessories supplied). Turn on the power and LED will light and beep will sound. G. A. A. b. A. e. f. H. A.+A. D. a. Put on G, and attach A onto the plastic plate A, and screw it with the Allen key and screws (accessories supplied). Put the ring O on the metal frame, and put them together onto the reader A+A, and screw them and buckle up the buckles on the back. Embed the water proof strip D onto the frame side of the base. Following by the install process of AR- (E-V-M).
2 Access controller Illuminated Touch-panel V0 Notice. Tubing: The communication wires and power line should NOT be bound in the same conduit or tubing.. Cable selection: Use AWG - Shielded Twist Pair to avoid star wiring. Use CAT for TCP/IP connection.. Power supply: Don t equip reader and lock with the same power supply. The power for reader may be unstable when the lock is activating, that may make the reader malfunction. The standard installation: Door relay and lock use the same power supply, and reader use independent power supply. Connector Table P P Cable: P Blue White ()DCVAmp Lock Relay Purple White ()DCVAmp Common--Point White ()DCVAmp Door Contact Orange Negative Trigger Input Exit Switch Purple Negative Trigger Input Transistor Output Max. /00mA Alarm Relay Gray (Open Collector Active Low) Thick Red DC Power Thick Black DC 0V Cable: P Beeper Pink Beeper Output V/00mA, Low LED Yellow Red LED Output V/0mA, Max Brown Green LED Output V/0mA, Max Door Output Transistor Output Max. /00mA Blue White (Open Collector Active Low) Wiegand Thin Green Wiegand DAT: 0 Input Thin Blue Wiegand DAT: Input WG Door Contact Orange Negative Trigger Input WG Exit Switch Purple Negative Trigger Input P P P P P Cable: P Orange White Net - TX+ TCP/IP Output Orange Net - TX- Green White Net - RX+ Green Net - RX Cable: P RS- for Lift Thick Green RS-(B-) Thick Blue RS-(A+) Cable: P Red Anti-Tamper Orange Switch Yellow Cable: P Power Red DC Output Security trigger signal Purple Security trigger signal Output Arming Red White Arming Output Duress Yellow White Duress Output Cable: P Optional:(Request to purchase AR-L additionally) TTL Port Black DC 0V Yellow TX White TE Orange RX Red DC V Wiring Diagram Connect AR-H to Electric Bolt Connect to Magnet Lock Electric Bolt E Exit Switch DC Magnet Lock DC P P DC DC
3 SOYAL ACCESS CONTROL SYSTEM AR- (E-V) V0 Connect to Electric Strike Electric Strike P DC Strengthen security with AR-RB Electric Bolt P DDR DC P DC CTL DC DC AR-RB Connect to Door Contact P Door Contact ALM Exit Switch E Electric Bolt CTL Reader BZ RLED GLED WG 0 WG DC DC Connect to Reader If any fire emergency, the people can escape by press a switch to open all doors Electric Strike Magnet Lock Electric Bolt DC P E BZ RLED GLED Door Output WG 0 WG WG-DS WG- CTL DC P Alarm Relay Outpot Module Door Contact Door Contact DC DC P Transistor IN00 P P Transistor IN00 Fire Emergency Adding and Deleting Tag Add Single Tag or Random tags Input (or Master Code) 9 UUUUU 0000 Present the tag(s) with (single tag or random numbered cards one by one) Done [e.g.] readom cards with user addresses No. 00 and No. 0: Access programming mode Present the tags one by one Done Add the Sequential tags Input (or Master Code) 9 UUUUU QQQQQ Present the tags (Present the tag with the lowest number first.) OK [e.g.] User Address NO.0 to NO.0 have 0 pcs of sequential tags:(~): Access programming mode Close Tag into RF Area(only use the tag NO.) OK Delete a Single Tag Input (or Master Code) 0 SSSSS 9 EEEEE [e.g.] Delete User Address: 000 Access programming mode Tag Information CARD CODE SITE CODE CARD CODE SITE CODE
4 Access controller Illuminated Touch-panel V0 Delete a batch of Tags Input (or Master Code) 0 SSSSS 9 EEEEE [e.g.] Delete User Address: 000~00 Access programming mode Delete All Tags Input (or Master Code) 9 9 Programming A. Entering and Exiting Programming Mode Entering Input or PPPPPP [e.g.] The Default Value=, if already changed the Master Code=, input Access programming mode Exiting Input Changing the Master Code Access programming mode 09 PPPPPPRRRRRR [Input the -digit new master code twice.] [e.g.] If want to changing the Master Code=, input 09 B. Changing the Node ID of Reader Access programming mode 00 NNN MMM AAA [NNN= Node ID: 000~; MMM=AR- (E-V) Door NO.:~; AAA=WG Reader Door NO.:~ C.Setting up the control mode (M/M) Access programming mode 0 N [N=/] Mode Support M Networking/ Stand-Alone User Capacity,000 (0~,999) Access Mode.Card only.card and PIN (-digit PIN).Card or User address (-digit) + Individual PIN (-digit individual PIN) Event Capacity,000 0 Holidays Duress Time Zone V V unlimited Lift Anti-passback Control V M Networking/,000.Card only,000 V V unlimited V.Card and PIN (-digit individual PIN) Stand-Alone (0~,999).Card or PIN (-digit individual PIN) D. Setting up the password Individual PWD (M/M) Card or PIN: Access programming mode UUUUU PPPP [e.g. User address: 0000 and PWD:. Input 0000 ] Card and PIN: Access programming mode UUUUU PPPP [e.g. User address: 0000 and PWD:. Input 0000 ] E. Anti-pass-back Usually, anti-pass-back is commonly applied to parking areas in order to prevent from multi-entry with one card at a time, or somewhere wants to monitor not only the access but also exit condition. Enable device Access programming mode 0 U DDD U= Enable target unit(0=ar-ef/ev,=reader) [Please refer to function default value for details.] [e.g.] If the AR-EF/EV set to exit reader, WG Reader set to access reader. Access programming mode [Please refer to function default value for details.] Enable card user Access programming mode SSSSS EEEEE P SSSSS= starting user address; EEEEE= ending user address [P=0 Enable/ P= Disable/ P= Reset] [e.g.] User address from 00 to 00 enable the anti-pass-back function: F. Auto Open Zone Door will keep opening after first man flashing card. When the reader is stand-alone, supporting only sets of auto-open zone by device setting. Auto-open zone can extend up to unlimited sets by Networking. Enable/Disable auto open zone Access programming mode 0 U DDD U= Enable target unit(0=ar-(e-v),=reader) [Please refer to function default value for details.] [e.g.] If the AR- (E-V) set to Enable aut open zone. Access programming mode [Please refer to function default value for details.] Enable/Disable auto open door without presenting card Access programming mode U DDD U= Enable target unit(0=ar-(e-v),=reader) [Please refer to function default value for details.] [e.g.] If the WG Reader set to Enable aut open door without presenting card. Access programming mode [Please refer to function default value for details.] Setting up access time Access programming mode 0 MW NN HHMMhhmm H [M=AR- (E-V); W=Reader(0=disable,=enable); NN: sets of auto-open zone (NN=00~); HHMMhhmm=Starting time to ending time; H= days of week + Holiday (F= 0: disable; : enable)] [e.g.]ar- (E-V) (without WG reader), to set second time zone which could be passed only at 9:0am to :0pm on Mon, Wed and Fri. Access programming mode setting is completed
5 SOYAL ACCESS CONTROL SYSTEM AR- (E-V) V0 G. Lift control Connect with AR-0ROB to control floors which the user will be able to access. [BAUD900] Set Floor Single floor (G) L L L L L L L L Access programming mode UUUUU LL 0 UUUU=User Address LL=Floor number (0~ floor) [e.g.] User address NO. only can reach the elevator to the th floor: Multi floors 0 9 Access programming mode UUUUU G LLLLLLLL 0 9 [UUUUU=User address G: sets of lift control (Input: 0~) LLLLLLLL: 0 9 floors setting (L=0=Disable, L==Enable) [e.g.] User address NO. can reach only the th and 0th floor: 0 9 Access programming mode H. Setting Up the Arming Conditions: Application:. Arming is enabled. Door open too long: Door is open longer than door relay time plus door close time..alarm system connected. Force open (Opened without a valid user card): Access by force or illegal procedure. Enable Arming status:. Door position abnormal: Arming is enabled and the power is suddenly off then on. Standby Mode Card only Card or Passcode Card and Passcode Enable all devices Enable particular device Input digit user address Input Induct valid card Input digit pass Induct valid card Input digit Induct valid card Input digit digit pass code Input digits code Input digits arming arming code arming code U or arming code or U code or U Enter Program Mode Enable all devices: Access programming mode Enable particular device: Access programming mode U Disable Arming status: Standby Mode Card only Disable all devices Induct valid card Input digit arming code 9 Disable particular device Induct valid card Input digit arming code U or Factory default armingcode is:. U=Reader unit (0=AR- (E-V), =WG Reader). Restoring Factory Settings Reset all device parameters and user card data Reset all device parameters and user card data: Access programming mode Reset all user card data: Access programming mode 9 9 Reset IP Setting: Press IP Resent Button of main board for few seconds. (Reference to picture) After operation as above, you will hear the long reminder sound,and wait until the sound disappear then reset the power of the controller,the device will restore factory setting. Card or Passcode Card and Passcode Input digit user address Input Induct valid card Input digit pass digit pass code Input digits code Input digits arming arming code 9 or U code 9 or U Firmware Upgrade Get the upgrade software from SOYAL or our distributor and run UdpUpdater software Execute the software The software is within SOYAL CD or Login the SOYAL web to downloads Update the firmware [Please login the SOYAL web to download the new ISP Firmware.]. Input the Target Address and Port. [Load F/W] open the documents that have the new ISP Firmware. Click the new ISP Firmware and [Open] it. Click [Update Device] to start the firmware update. Till the screen shown [Firmware Update is Complete]
6 Access controller Illuminated Touch-panel V0 IP Setting Open your Web Browser and input factory default IP address: If the IP address of AR- (E-V) has changed We must enter the new IP address. Page menu Monitor the on-line computer IP Setting Change the Log-in information Current State Online Status is able to monitor and show which computer is linking on Ethernet Module Show which computer is linking on Ethernet Module. Current IP address of the AR- (E-V) Log-in User Password When you choose the "Networking Setting" or "User Password" at first. Log-in window will pop out and please input At the Factory Default User name: admin Password: No as default value,so please just press OK to log-in admin Networking Setting You will find initial IP Address 9... and check MAC Address is the same as sticker on Ethernet Module device. Please revise IP address you want, and then click Update button. After updating the IP, please re-connect the Web Browser by new IP address. User Password Change the log-in password to lock the IP setting of Ethernet Module. The password composes of 0 characters at most, it can be either A~Z or 0~9.
7 SOYAL ACCESS CONTROL SYSTEM AR- (E-V) V0 Command List Function Command Exposition Entering programming mode PPPPPP PPPPPP: Master Code, (Default value: ) Exiting programming mode Exiting programming mode and enabling all device into arming status. Including AR- (E-V), WG Reader Enabling each device into arming status. U U=Enable target unit (0=AR- (E-V), =WG Reader) Node ID setting 00 NNN MMM AAA NNN=Node ID,(00~) MMM=AR- (E-V) Door Number,(00~) AAA=WG Reader Door Number,(00~) default value = CCCCCCCCCCCC CCCCCCCCCCCC = 900 IP Address assign (Must power reset) If set to will enable DHCP otherwise will disable DHCP Netmask Gateway assign Door relay time setting 0 U TTT U=Enable target unit (0=AR-(E-V), =WG Reader) TTT=Door relay time;000 (Output constantly) 00~00=-00 Sec.;0~09=0.~0.9Sec. Alarm relay time setting 0 TTT TTT=Alarm relay time;000 (Output constantly) 00~00=~00 Sec. Mode setting 0 M M= (Mode );M= (Mode ) Arming delay time setting 0 TTT Base on second, range: 00~ Alarm delay time setting 0 TTT Base on second, range: 00~ Master card setting 0 SSSSS EEEEE SSSSS-EEEEE=00000~999 SSSSS= starting user address; EEEEE= ending user address M=AR-(E-V); W=WG Reader (0=disable; =enable) NN= sets of auto-open zone (Range: 00~) Auto-open zone setting HHMMhhmm=staring time to ending time 0 MW NN HHMMhhmm (e.g.: 0000=0:0 to :00) H : days of week -Sun/Mon/Tue/Wed/Thu/Fri/Sat (Input value: 0=disable; =enable) H: Holiday (Input value: 0=disable; =enable) Master code settings 09 PPPPPPRRRRRR PPPPPP= New master code RRRRRR= Repeat the new master code Suspend or delete tags Suspend:0 SSSSS EEEEE :Suspend 9 :Delete Delete: 0 SSSSS 9 EEEEE SSSSS= starting user address; EEEEE= ending user address Recover tag SSSSS EEEEE SSSSS= starting user address; EEEEE= ending user address Setting up Card or PIN mode by user address UUUUU PPPP UUUUU= user address; PPPP=-digit individual PWD (Access mode: Card or PIN) Setting up Card and PIN mode by user address UUUUU PPPP UUUUU= user address; PPPP=-digit individual PWD (Access mode: Card and PIN) Arming output setting TTT Base on ms, range:~, default value=0, Input 0= Timeless Duress code setting PPPP PPPP=-digit PWD ( ) Default value:0000 Card number modification UUUUU SSSSSCCCCCC UUUUU=user address SSSSS= digit site code ; CCCCC= digit card code Arming PWD setting PPPP PPPP=-digit PWD ( ) Default value: Enabling or Disabling into arming status Card+NNNN NNNN:Arming PWD Enabling or Disabling each device into arming status. Card+NNNN U U=Enable target unit (0=AR-(E-V), =WG Reader) Enabling all device into arming status. Disabling all device into arming status. Card+NNNN Card+NNNN Door open waiting time U TTT Set the card by induction 9 UUUUU QQQQQ Reader additional setting 0 U DDD 9 U=Enable target unit (0=AR-(E-V), =WG Reader) TTT=Door open waiting time:00~00;default value: sec. UUUUU=user address QQQQQ=Card quantity(0000=continuously inducting) U=Enable target unit (0=AR-(E-V), =WG Reader) DDD=Function default value
8 Access controller Illuminated Touch-panel V0 Command List Function Command Exposition Lift control setting: multi-doors UUUUU G LLLLLLLL UUUUU=user address;g= sets of lift control(0~); LLLLLLLL= assigned floor (F=0: Disable, : Enable) MMM=Node ID of lift controller AR-0RO/ AR-0ROB relay time setting MMM TTT TTT= relay time: 000~00=~00 sec. U=Enable target unit (0=AR-(E-V), =WG Reader) Factory setting U DDD DDD:Function default value Real time clock setting YYMMDDHHMMSS YYMMDDHHmmSS: Year/Month/Day/Hour/Min./Sec. SSSSS= starting user address; EEEEE= ending user address Anti-pass-back (Enable user) SSSSS EEEEE P P=0=Enable; P==Disable; P==Initial Lift control setting: single door UUUUU LL UUUUU=user address;ll:floor number(0~ floor) Duress Function and Arming output setting FFF Arming output and Duress function: FFF= 00 (default value) Delete all tag 9 9 Same tag reading interval time TTTT Base on 0ms, range from 0 to 000 Auto ring the clock alarm schedule SS HHMMTT H SS= sets auto alarm schedule, range 0~ HHMM= HH:MM (ex. 00: Ring bell at 0:0) TT=Period of time to ring bell (Base on second, range 0~99 sec.) : days of week -Sun/Mon/Tue/Wed/Thu/Fri/Sat (Input value: 0=disable; =enable) H: Holiday (Input value: 0=disable; =enable) MM= Month of year (0=Jan...0=Oct.) Holiday Setting MMDD F DD= Date of month (0=st day of month) F= 0:Delete ; : Add Enabling or Disabling into Full Access status MW M=AR-(E-V); W=WG Reader (0=disable; =enable) RS port function setting (Needs to be restarted after setting) AB TTL port BAUD setting DDD Function Default Value A=0:AR0RO B=0: 900(default value) :Host (default value) : 900 :LED Panel : 00 :Printer : 00 DDD : 00=00 bps DDD : 0=900 bps DDD : 9=900 bps 0 U DDD Default Value Function Option Value Application Time Attendance 0: Yes : No 00 Networking Auto Re-lock 0: Disable : Enable 00 Networking/Stand-Alone Auto Open 0: Disable : Enable 00 Networking/Stand-Alone When Access Mode is "Card and PIN", Readers can skip pressing PIN code. 0: Disable : Enable 00 Networking/Stand-Alone Exit by Push Button 0: Disable : Enable 0 Networking/Stand-Alone Enable force Open 0: Slave : Mater 0 Networking As Access/Exit Reader 0: Exit : Access 0 Networking Anti-pass-back 0: Disable : Enable Networking U DDD Default Value Function Option Value Application Enable Egress Beep Sounds 0: Disable : Enable 00 Networking/Stand-Alone Enable Arm/Disarm Zone() 0: Disable : Enable 00 Networking/Stand-Alone Reader and controller share the same door relay (only for reader) 0: Disable : Enable 0 Networking/Stand-Alone Free Access Mode 0: Disable : Enable 0 Networking/Stand-Alone Stop Alarm by... 0: None : Push button/door Closed 0 Networking/Stand-Alone Open door immediately without st card presented at auto open zone 0: Disable : Enable Networking/Stand-Alone U=Reader (0=AR-(E-V), =WG);DDD = Value FFF Default Value Function Option Value Application Expiry User Access Trigger Alarm 0:Disable :Enable 00 Networking/Stand-Alone Auto Reset Anti-pass on TZ Duress Function and Arming output setting 0:Disable 0:Wiegand output :Enable : Arming and Duress Networking/Stand-Alone Networking/Stand-Alone RS- 0ROB:00 HOST: Networking/Stand-Alone LED: 0 PRN: 0 0 [e.g.]setting AR- (E-V) : Arming and Duress+PRN (x00)+(x 0)=0 Access programming mode 0 setting is completed
ECL-ACC980IP-V2/VP. Contents ECL-ACC980IP-V2. Installation ECL-ACC980IP-V2 ECL-ACC980IP-VP. Parts Description ECL-ACC980IP-VP A. B. C.
EC-ACC90IP-/P Contents EC-ACC90IP- Products User Guide Terminal Cables Tools P P P a x A. E. F. P P P P EC-ACC90IP-P Products User Guide Terminal Cables Tools P P P b x A. B. C. D. P P P P c x Parts Description
More informationSOYAL AR-725E-M / AR-725E / AR-725X V Contents AR-725E-M. Installation AR-725E-M AR-725E AR-725X. Parts Description AR-725E AR-725X
SOYAL ACCESS CONTROL SYSTEM AR-E-M / AR-E / AR- 0909 Contents AR-E-M Products User Guide Terminal Cables Tools P P P P c x d x A. B. C. D. P P P P AR-E Products User Guide Terminal Cables Tools P P P P
More informationAR-881(EF-MT) P4 P5 P6 P7. P7 only provide to the controller that have doorbell function.
SOYAL ACCESS CONTROL SYSTEM AR- (EF) V00 Contents Product User Guide Terminal Cables Tools Optional P P P Flat Head Cap Philips Tapping Screw: x0 Security Torx: Mx0 WG keyboard AR-(EF-DO) Installation
More informationSOYAL AR-331(EF) Contents. Front Panel & Indicator. Installation. Connector Table CN6 CN2 V Option. 4 Accessories. 2 Terminal Cables 3 Tools
SOYAL ACCESS CONTROL SYSTEM AR- (E/EF) V0 Contents Product Terminal Cables Tools Accessories Option P P Flat Head Cap Philips Tapping Screw: x0 Security Torx: Mx0 AR-(E) AR-(EF) P P P Security Torx Wrenches
More informationSOYAL AR-321H/AR-721H/ AR-725H/AR-757H ACCESS CONTROL SYSTEM. Contents AR-321H [Metal Case] AR-721H. AR-725H [Illuminated Touch-panel] AR-725H-M
SOYAL AR-H/AR-H/ AR-H/ ACCESS CONTROL SYSTEM Contents AR-H [Metal Case] Product Water proof Strip d x AR-H Product f x AR-H [Illuminated Touch-panel] AR-H-M Products c x e x A. B. C. D. AR-H Products f
More informationAR-321 (H) / AR-331 (H)/ AR-721(H) / AR-725 (H) / AR-757 (H)
AR- (H) / AR- (H)/ AR-(H) / AR- (H) / AR- (H) SOYAL ACCESS CONTROL SYSTEM V0 Contents AR- (H):Touch-panel Metal Housing Product User Guide Terminal Cables Tools Water proof Strip d x P P P P AR- (H):Touch-panel
More informationSOYAL AR-321H/AR-331H/ AR-721H/AR-725H/AR-757H ACCESS CONTROL SYSTEM V Contents AR-321H [Touch-panel Metal Housing] 1 Product 2 User Guide 3 Ter
SOYAL AR-H/AR-H/ AR-H/AR-H/AR-H ACCESS CONTROL SYSTEM Contents AR-H [Touch-panel Metal Housing] Product User Guide Terminal Cables Water proof Strip d x AR-H [Touch-panel Metal Housing]/ AR-H-S [Metal
More informationOption. AR-701B-X Fit 35mm DIN Rail or Mount directly AR-721K AR-725K AR-331K 1456 RAM. WG 26 / WG 34 Power Supply. YES Power Consumption
SOYAL ACCESS CTROL SYSTEM AR-E V0 Contents Product User Guide Panel Mounting Base WG Key-panel Reader Option AR-0B-X Fit mm DIN Rail or Mount directly AR-K AR-K AR-K Option For Stand-alone Command Setting
More informationBiometrics Device Access controller Fingerprint & Finger Vein V Connector Table () Cable: P Wire Application Anti-Tamper Switch Wire Color Red Orange
SOYAL ACCESS CONTROL SYSTEM AR- (EF-V) / (EV-V) V Contents AR- (EF-V):Fingerprint Products User Guide Terminal Cables Tools Optional P P P AR- (EV-V):Vein P P P AR-RB Products User Guide Terminal Cables
More informationP4 P5 P6. Security trigger signal 2 Purple Security trigger signal Output 6 Thin Blue Wiegand DAT: 1 Input
SOYAL ACCESS CONTROL SYSTEM AR- (E) / (EF) V Contents AR- (EF):Fingerprint Products User Guide Terminal Cables Tools DO AR- (E) Or MT P P P P P P P P P P P P Water proof Strip Optional Products User Guide
More informationAR-721E-V2 (AR-721E-V2-X) AR-701B-X Fit 35mm DIN Rail or Mount directly 16,000 32,000. Connector CN18 Host TCP/IP. Code Pin Description
SOYAL ACCESS CTROL SYSTEM AR-E-V V0 Contents Product User Guide Panel Mounting Base (AR-E-V-X) Metal Box (AR-E-V-M) Option Option Specification CPU Memory Power Supply Power Consumption Interface / Baud
More informationFunction Menu. 1.Add/Delete. 1. Password 2. Access Mode 3. Extend Options 4. Single Floor 5. Multi Floors 6. Enroll FP 7.
Function Menu 1.Add/Delete 2.User Setting 1. Password 2. Access Mode 3. Extend Options 4. Single Floor 5. Multi Floors 6. Enroll FP 7. Delete FP 1. Add - Card ID 2. Add - RF-learn 3. Suspend - Addr 4.
More informationAR-727H. Technical Manual. 26 August Version 1.00
AR-727H Technical Manual 26 August 2008 Version 1.00 Southern Office: Raytel House Brook Road Rayleigh Essex, SS6 7XH Tel: (01268) 749310 Fax: (01268) 749315 Northern Office: Unit 3 Block 5 Oakbank Industrial
More informationQUICK START GUIDE. 2.4 Inch Finger Vein Terminal Time Attendance & Access Control
QUICK START GUIDE 2.4 Inch Finger Vein Terminal Time Attendance & Access Control Version: 1.0 Date: Apr., 2017 1 2.4-Inch TFT LCD USB Storage Device Port Keypad& Card Reader Doorbell & LED Indicator Fingerprint
More informationCV-550SPK V2 Waterproof Keypad/Reader/Controller Installation Instructions
CV-550SPK V2 Waterproof Keypad/Reader/Controller Installation Instructions Packing List NAME MODEL/SIZE QTY Self tapping screw 0.15 x 1.06 (4mm 27 mm) Rubber plug 0.23 x 1.2 (6mm 30 mm) Star screw driver
More informationAR-727HB-RAY AR-716E-RAY EAR-727HB-RAY Series of Controllers
AR-727HB-RAY AR-716E-RAY EAR-727HB-RAY Series of Controllers Installation and Programming Guide AR-716E-RAY EAR-727HB-RAY AR-727HB-RAY 10th August 2011 Version 1.00 Southern Office: Raytel House Brook
More informationCM-110SK Standalone Keypad Installation Instructions
CM-0SK Standalone Keypad Installation Instructions. Packing List Qty Name Remarks 2 2 Keypad User manual Screwdriver Wall plugs Self-tapping screws Torx screw 0.8 x 2.4 Φ(20 mm 60 mm) 0.24 x.2 Φ (6 mm
More informationQuick Start Guide. ProBio & ProFAC + ZKBioSecurity 3.0
Quick Start Guide ProBio & ProFAC + ZKBioSecurity 3.0 CONTENT 1 Safety Precautions...2 On Using Face Recognition Device...3 Device Overview...5 Product Dimensions & Installation...6 Power Connection...7
More informationFinger Vein Access Control device Quick Start Guide Version: 1.0 Date: June USB slot. USB slot
Overview Fingerprint & Finger Vein Device Front Left Side: Finger Vein Device Touch screen Card reader Fingerprint reader Finger vein reader Finger vein sensor: During registration, after finger touches
More informationQUICK START GUIDE. 2.4 Inch TFT Terminal Time Attendance & Access Control
QUICK START GUIDE 2.4 Inch TFT Terminal Time Attendance & Access Control Safety Precautions The following precautions are to keep user safe and prevent any damage. Please read carefully before installation.
More informationPartizan PAB-FC2. Fingerprint scan time Fingerprint identification time. <0.5 s < % <0.0198% Ingress protection rating
1. Features & Technical Parameters 1.1 Features: Partizan PAB-FC2 Metal vandalproof housing Secure and reliable biometric fingerprint recognition Simple for using, wiring can be done by a user without
More informationDigital Keypad Introduction
K2 Digital Keypad Introduction The K02 uses the latest microprocessor technology to operate door strikes and security systems that require a momentary (timed) or latching dry contact closure. All programming
More informationCV-110SPK Standalone Keypad/Prox Access Control Installation Instructions
CV-110SPK Standalone Keypad/Prox Access Control Installation Instructions 1. Packing List Qty Name Remarks 1 1 1 2 2 1 Keypad User manual Screwdriver Wall plugs Self-tapping screws Torx screw 0.8 x 2.4
More informationEL-ST100 KEYPAD CONTROLLER
WIRING DIAGRAM EL-ST100 KEYPAD CONTROLLER WEATHER-PROOF STANDALONE ACCESS CONTROLLER WITH KEYPAD & PROXIMITY TECHNOLOGY Programming and Installation Manual NOTE: www.elock2u.com ICT at work! Version 3.6
More informationEZ-TAG2 Manual_Layout 5 11/12/ :14 Page 1 U S E R M A N UAL
EZ-TAG2 Manual_Layout 5 11/12/2012 09:14 Page 1 USER MANUAL EZ-TAG2 Manual_Layout 5 11/12/2012 09:14 Page 2 Contents EZ-TAG2 and Back Plate 1 x Security Torx Key 4 x Screws and raw plugs 1 x Marking out
More informationSingle Door Standalone Access Control User Manual
Single Door Standalone Access Control User Manual Reading this manual carefully before install and use the device 1. Packing List Name Quantity Remarks Keypad User manual Screw driver Rubber plug Self
More informationOperation manual For NG BIOSINGLE Version 1.1
Operation manual For NG BIOSINGLE Version 1.1 SMART-I ELECTRONICS SYSTEMS PVT. LTD.(An ISO 9001:2008 certified company) R&D, Training & Customer Support Center: First Floor, Arihant Plaza Phase II, Village-Ovala,
More informationW3-H Waterproof Keypad/Reader/Controller
W3-H Waterproof Keypad/Reader/Controller User Manual 1. Packing list Name Quantity Digital Keypad W3-H 1 User Manual 1 Screw Driver Rubber Bungs Self Tapping Screws Diode 1 4 4 1 Manager Card 2 Remark
More informationFingerprint Identification Proximity Reader. Quick Installation Guide
Fingerprint Identification Proximity Reader Quick Installation Guide 1. WHAT S INCLUDED Please unpack and check the contents of the box. If any of these parts are missing, please contact a nearby distributor
More informationACTpro Single Door IP Controller. Operating & Installation Instructions
ACTpro 1500 Single Door IP Controller Operating & Installation Instructions 18-00079 Issue 1 This manual refers to the ACTpro 1500 a TCP/IP based control unit supporting up to 32 doors. Access Control
More informationGV-AS Controller. Installation Guide
GV-AS Controller Installation Guide Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. 2011 GeoVision, Inc. All rights reserved.
More informationWiring Guide EP.NMINI. Version 1.02 Last Updated:
Wiring Guide EP.NMINI Version 1.02 Last Updated: 14-10-2014 1 Note: See http://www.entrypass.net/ for updates, revisions, and download the latest installation manual There are currently 2 version of EntryPass
More informationEZTAG3 PROXIMITY AND KEYPAD DOOR ENTRY
EZTAG PROXIMITY AND KEYPAD DOOR ENTRY USER MANUAL www.espuk.com EZTAG Manual_Layout.indd 8//06 5:8:0 System Components Proximity and Reader 0 x Proximity Tags x Hex Key x Plastic wall plug x Countersunk
More informationWaterproof. Keypad/Reader/Controller
Waterproof Keypad/Reader/Controller User Manual W1-C W3-C User manual 1. Packing List Name Quantity Remarks Digital Keypad-W1-C/W3-C 1 User manual 1 Screw driver 1 Rubber bungs 4 6*27mm, used for fixing
More informationSF200. Installation Guide & Quick Start Guide. 2 TFT AC Terminal Version: 1.0 Date: June 2014
SF200 Installation Guide & Quick Start Guide 2 TFT AC Terminal Version: 1.0 Date: June 2014 All design and specification declared are subject to change without notice in advance. Contents Safety Precautions
More informationStandalone Keypad Access Control. User Manual. SS-TS2000 Size:120*80*25 mm
Standalone Keypad Access Control User Manual SS-TS2000 Size:120*80*25 mm Please read the manual carefully before use this unit 1. Packing List Name Quantity Remarks Keypad 1 User manual 1 Screw driver
More information180 Series Keypad. Handbook. Revision 2.1
180 Series Keypad Handbook Revision 2.1 Revision History Revision 1.0 Initial release Revision 2.0 Major update with addition of 180-40 Added 180-40 to document and various headings Note regarding unique
More informationTwo Door Controller GEN-045
Australian Owned, Designed and Manufactured Two Door Controller GEN-045 Genesis Electronics Australia Pty Ltd www.genesiselectronics.com.au Distributed by: Genesis reserves the right to change or modify
More informationInstruction Manual. Vogue. Security. Technology. Innovation 2013-V01
Instruction Manual DH16A-60DTE Model 60 with plastic keypad, stand alone access control DH16A-60DTQE Model 60 with plastic keypad, networked access control 2013-V01 Security Technology Vogue Innovation
More informationGV-AS/EV Controller. User s Manual
GV-AS/EV Controller User s Manual Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. AS100.110.120.210.400.410.810-EV48-C
More informationStandalone Keypad Access Control. User Manual. Please read the manual carefully before use this unit
Standalone Keypad Access Control User Manual Please read the manual carefully before use this unit 1. Packing List Name Quantity Remarks Keypad 1 User manual 1 Screw driver 1 Φ20mm 60mm,Special for keypad
More informationEZTAG3 PROXIMITY AND KEYPAD DOOR ENTRY
EZTAG Manual.qxp_Layout 0/0/06 :7 Page EZTAG PROXIMITY AND KEYPAD DOOR ENTRY USER MANUAL www.espuk.com EZTAG Manual.qxp_Layout 0/0/06 :7 Page System Components Proximity and Reader 0 x Proximity Tags x
More informationIndustrial Serial Device Server
1. Quick Start Guide This quick start guide describes how to install and use the Industrial Serial Device Server. Capable of operating at temperature extremes of -10 C to +60 C, this is the Serial Device
More informationF3102 / F3107 / F3110 / F3115 / F3210 / F3215 PN: 86085K K
F3102 / F3107 / F3110 / F3115 / F3210 / F3215 86085K3000020 PN: 86085K3000030 Zavio F3102/F3107/F3110/F3115/F3210/F3215 Quick Installation Guide Please follow the installation steps below to set up F3102
More information2M IR Mini Dome Quick Installation Guide
1 2M IR Mini Dome Quick Installation Guide Please follow the installation steps below to set up 2M IR Mini Dome IP Camera. Check the package contents against the list below. See P.1 Physical overview.
More informationGV-Card Reader. User s Manual
GV-Card Reader User s Manual Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. READER-B 2016 GeoVision, Inc. All rights
More informationWELCOME. For customer support or any inquiries, please visit our web site at or contact us at
WELCOME Congratulations on purchasing the GBF Smart Four Wire Intercom System. Our factory engineers were the first to enable multiple security cameras being monitored through a smart mobile device and
More informationInstallation & User Manual
Contents Installation Instructions 3 Installation Diagrams 4 System Overview 6 Wiring Diagrams 8 Network Diagrams 9 Operation Instructions Fingerprint Enrollment 12 21 Wi-Enterprise Controller www.transmittersolutionssmart.com
More informationQuick Start Guide. GV-CS1320 Camera Access Controller
Quick Start Guide GV-CS1320 Camera Access Controller Thank you for purchasing GV-CS1320 Camera Access Controller. This guide is designed to assist the new user in getting immediate results from the controllers.
More informationgenesis TECHNICAL MANUAL Two-Door Controller GEN-045
Two-Door Controller GEN-045 Genesis Electronics Australia Pty Ltd www.genesiselectronics.com.au info@genesiselectronics.com.au Australian Owned, Designed and Manufactured Distributed By:- Genesis reserves
More informationUser Manual. Split access control with intelligent secured power supply.
User Manual Split access control with intelligent secured power supply. Contents. Introduction, features and specifications. Installation and Wiring Diagram 3. Manager Card Operation 4. User Settings 5.
More informationREX F-0-9 Standalone or Access Controller
REX F-0-9 Standalone or Access Controller Power supply The controller need s external power supply to operate. The Spider W40 power supply is sufficient to power two controllers and two 12V electric strikes
More information2000 Series e/em Style Keypad Installation and Programming Manual
2000 Series e/em Style Keypad Installation and Programming Manual Document Number: 6054022 Revision: 0 Date: 12/21/06 Table of Contents Table of Contents Section 1: Introduction... 6 1 Product Description...6
More informationSpecifications: Features:
ROFU Features: Applicable card mode EM Card / Key Fob 1 Administrator and 200 Users 200 Proximity Cards / Key fobs Access Modes:Use Bluetooth smartphone or Card / Key fob to access Built-in Tamper alarm
More informationW3-M. Metal waterproof standalone access control/reader. User Manual
W3M Metal waterproof standalone access control/reader User Manual Name Digital Keypad W3M User Manual Screw driver Rubber bungs Selftapping screws Diode 1. Packing List Quantity 1 1 1 4 4 1 Remark 6*27mm,
More informationGV-RK1352 and GV-R1352 Card Reader
GV-RK1352 and GV-R1352 Card Reader The GV-RK1352 and GV-R1352 are card readers designed to recognize identifications cards. GV-RK1352 comes with keypad, allowing it to also recognize PIN codes. Featured
More informationInstallation & User Manual V2.08
YOUR SECURITY IS OUR PRIORITY Other products from GSD Contents Installation Instructions Installation Diagrams System Overview Wiring Diagrams Network Diagrams Operation Instructions Fingerprint Enrollment
More informationZAVIO Outdoor IR Mini Dome. Quick Installation Guide
ZAVIO Outdoor IR Mini Dome Quick Installation Guide 0 Quick Installation Guide Please follow the installation steps below to set up your IP Camera. Check the package contents with the list below. See P.1
More informationThis document mainly introduces the windows and operations of the F18 model 2.4 inch color TFT product.
F18 User Manual Version: 1.0 Date: Dec. 2011 Introduction: This document mainly introduces the windows and operations of the F18 model 2.4 inch color TFT product. About this manual 1. Not all the devices
More informationPanoramic Fisheye IP Camera. Quick Installation Guide
Panoramic Fisheye IP Camera Quick Installation Guide 8608595330000 Please follow the installation below steps to set up Panoramic Fisheye IP Camera. Check the package contents against the list below.see
More informationC5S120 Installation and Connection Guide
C5S120 Installation and Connection Guide Version: V1.1 1. Cautions Please note the following cautions. Mis-operation may lead to personal injury or equipment failure: 1) Do not energize the system before
More informationF6-Fingerprint. Access Control/Reader. User Manual. F6 - Simplified Instruction. (Master Code) # (Factory default:1234) Enter the Programming Mode
-Fingerprint Access Control/Reader Function Description Enter the Programming Mode - Simplified Instruction Operation (Factory default:1234) Change the Master Code Add Fingerprint User Add Card User Add
More informationCRC220 and CRC221 INSTALLATION GUIDE. REF No.: DOC0014 ISSUE: 09
CRC220 and CRC221 INSTALLATION GUIDE REF No.: DOC0014 ISSUE: 09 30th July 2015 2 Contents CRC220 & CRC221 INSTALLATION GUIDE 1. Scope 1-1 2. Introduction 2-1 2.1 Features 2-1 2.1.1. PCB Features 2-1 2.1.2.
More informationSafety Precautions How to place the finger Product Contents Product PIN Diagram Product Dimensions Cables and Connectors Installation of Back Plate
www.zkaccess.com Safety Precautions How to place the finger Product Contents Product PIN Diagram Product Dimensions Cables and Connectors Installation of Back Plate Power Connection Ethernet Connection
More informationStandalone Access Control
Standalone Access Control BELL_A BELL_B D0 D1 D_in(LED) Open (BZ) COM ALARM- Light Green Pink Red Black Green White Brown Yellow Blue Purple Orange Grey Door Bell DC 12V Power Green White Reader Red Black
More informationInstallation Guide for PR311SE and PR311SE-BK v1.0 Access Controllers Rev. B
Installation Guide for PR311SE and PR311SE-BK v1.0 Access Controllers Rev. B Introduction This document contains minimum information that is necessary to properly install the device and to perform its
More informationEncoder Firmware V User s Manual. Outdoor PTZ Camera Hardware Manual KCM /05/09.
Encoder Firmware V4.06.09 User s Manual Outdoor PTZ Camera Hardware Manual KCM-8211 2013/05/09 1 Table of Contents Precautions... 3 Introduction... 4 List of Models... 4 Package Contents... 5 Safety Instructions...
More informationRevision Date: 02 Mar 2018
KAS Bluetooth Locks HOMES AIRBNB OFFICES SHARED SPACE Revision Date: 02 Mar 2018 COPYRIGHT: Information in this document is subject to change without further notice. No part of this document can be reproduced
More informationTwo-door Access Controller
Two-door Access Controller Quick Start Guide V1.0.0 Preface Overview This document elaborates on structure, installation, interface and wiring of two-door access controller. Symbol Definition The following
More informationKP2000E/EM Series Style Keypad
23852973 KP2000E/EM Series Style Keypad Installation and Programming Instructions Models KP2000EXX and KP2000EMXX Specifications Parameter Voltage Requirements Keypad Current Requirements (Max) Relay Contact
More informationPR602LCD v1.0 Installer Manual Rev. A
PR602LCD v1.0 Installer Manual Rev. A Introduction This document contents minimum information required for electrical connections and installation of the PR602LCD access controller in Roger Access Control
More informationACCESS CONTROL QUICK INSTALL GUIDE. tel: +44 (0) fax: +44 (0) web:
ACCESS CONTROL QUICK INSTALL GUIDE tel: +44 (0)1457 874 999 fax: +44 (0)1457 829 201 email: sales@cop-eu.com web: www.cop-eu.com WIRING CONFIGURATION - ACS CONTROLLERS CONNECTIONS Dahua access controllers
More informationCC Series metal access control Manual
CC Series metal access control Manual 1.Description CC Series is a standalone for two doors, support card, pin, card+pin access way. It is with 2 relays to control 2 doors and supports up to 2000 users
More informationGV-AS200 Controller. Hardware Installation Guide
GV-AS200 Controller Hardware Installation Guide Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. 2008 GeoVision, Inc.
More informationStartup Guide. NetAXS-123. Version 5.2
NetAXS-123 Startup Guide Version 5.2 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
More informationOperating Instructions KEYPAD. Compatible WIRELESS ACCESS CONTROL
Operating Instructions KEYPAD Compatible WIRELESS ACCESS CONTROL Contents Technical specifications page 1 Approvals page 1 Changing the Master code page 2 Adding a User code page 3 Deleting a User code
More informationHSY-S209 EM Metal waterproof access control system User Manual
HSY-S209 EM Metal waterproof access control system User Manual Reading carefully before Install and use this manual 1. Product Profile The product is Contact-less inductive card Metal Password Access Controller,
More informationISC GB-XX ISC GB-XX ISC GB-XX ISC GB-XX
ISC910-1-0-GB-XX ISC911-5-0-GB-XX ISC920-0-0-GB-XX ISC921-5-0-GB-XX The ImproX IXP20 is a fully featured, stand-alone Access Control System supporting up to 1 000 Tagholders and 5 000 transactions. Designed
More informationBC Digital Keypad. User Manual
BC2200 Digital Keypad User Manual Name Digital Keypad BC2200 User manual Screw driver Rubber bungs Self tapping screws Diode 1. Packing List Quantity Remarks 1 1 1 4 Φ6mm 28 mm, used for fixing 4 Φ4mm
More informationINSTALLATION GUIDE 2.4 Inch TFT Terminal Time Attendance & Access Control
STALLATION GUIDE.4 Inch TFT Terminal Time Attendance & Access Control Optional accessories Safety Precautions The following precautions are to keep user s safe and prevent any damage. Please read carefully
More informationClick Save to return to the main Setup screen.
ON-SITE Setup Guide Thank you for purchasing the ON-SITE. This guide will assist you in the setup of the system. You can call for FREE technical support to get help anytime at 757-258-0910. Please note,
More informationACTpro 1500 Single Door IP Controller
ACTpro 1500 Single Door IP Controller ACTpro 1520 Single Door IP Controller with 12 V DC 2 amp power supply. Operating & Installation Instructions 18-00085 Issue 2 This manual refers to the ACTpro 1500
More informationSL2000E. Status Output. Electronic Code Lock. Features. Input. Exit Button Input. Introduction. Door Contact Input. Functional Description.
SL2000E Electronic Code Lock Features Door Relay output Status transistor output Aux transistor output Door Contact input Exit Button input INSTALLER code for programming MASTER code for arming/disarming
More informationQuick Start Guide.
1 Table of Content 1. Package Contents...1 2. Cautions... 1 3. System Requirements... 1 4. Hardware Overview... 2 4.1 Mini Dome Network Camera...2 4.2 IR Mini Dome Network Camera...3 4.3 Vandal-proof
More informationGV-AS/EV Controller. User s Manual
GV-AS/EV Controller User s Manual Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. ASEV-H 2016 GeoVision, Inc. All rights
More informationRD-SR2 ACCESS SECURITY PRODUCTS LTD. Proximity Card Reader with Remote Control. User Manual
RD-SR2 Proximity Card Reader with Remote Control User Manual INTRODUCTION The RD-SR2 is a compact, weather resistant multi-function card reader that can be used as a standalone programmable access control
More informationTEC100 USER/INSTALLER MANUAL V2.0 REV. 03/2018
TEC100 USER/INSTALLER MANUAL V2.0 REV. 03/2018 00. CONTT 01. SAFETY INSTRUCTIONS INDEX 01. SAFETY INSTRUCTIONS STANDARDS TO FOLLOW 02. PRODUCT PRODUCT PROFILE TECHNICAL PARAMETERS 03. INSTALLATION PRODUCT
More informationSecurity at Fingertips
Security at Fingertips www.esslsecurity.com Contents 1. Operating Instruction... - 1-1.1 Abbreviated Operating Procedures... - 1-1.2 Introduction to Fingerprint Recognition technology... - 2-1.3 About
More informationComfort, the Intelligent Home System. Comfort Fingerprint Reader Interface FPR01
Comfort, the Intelligent Home System Comfort Fingerprint Reader Interface FPR01 Introduction to the Comfort Fingerprint Reader Interface... 1 Specifications... 2 Equipment... 2 Settings... 2 Connections...
More informationPRO3200 Professional Modular Access Control Hardware
PRO3200 Access Control Hardware As a part of the WIN-PAK software controlled hardware family the PRO3200 professional modular access control hardware is an advanced access control panel capable of providing
More informationU-FLASH Setup Guide U-FLASH.
U-FLASH Setup Guide Thank you for purchasing the U-FLASH. This guide will assist you in the setup of the system. You can call for FREE technical support to get help anytime at 757-258-0910. Please note,
More informationOutdoor Hemispheric Mounting on the Ceiling with Gang Box (Face Down)
Outdoor Hemispheric Mounting on the Ceiling with Gang Box (Face Down) Installation Guide For Models: KCM-7911 2014/01/17 Table of Contents Installation Procedures... 3 Step 1: Prepare for Waterproof Installation...
More informationINSTALLATION GUIDE Xpass S2 English Version 2.2 EN XPS2 V2.20A
www.supremainc.com INSTALLATION GUIDE English Version 2.2 EN 101.00.XPS2 V2.20A Contents Safety Instructions... 3 Getting Started... 4 Components... 4 Features... 5 Part names and features... 5 Cables
More informationFingerprint Access Control F1. User Manual
Fingerprint Access Control F1 User Manual 1. Introduction F1 is a metal shell standalone fingerprint access control, using the America Atmel s MCU, with precise electron circuit and good productive technology.
More informationQuick Start Installation Guide
apc/l Quick Start Installation Guide Version A2 Document Part Number UM-201 May 2010 OVERVIEW The apc/l is an intelligent access control and alarm monitoring control panel which serves as a basic building
More informationUser Manual. PCKeypad Wireless Keypad
User Manual PCKeypad Wireless Keypad Description The PCKeypad is a wireless keypad with a PentaCODE transmitter built-in. It works with all of Elsema s PCR series receivers. The installer has the option
More informationInstallation Instructions
Alliance Arming Station AL-1111, AL-1116 1048520C September 2006 Copyright 2006, GE Security Inc. Introduction This is the GE Alliance Arming Station for models AL-1111 (four-line LCD) and AL-1116 (four-line
More informationAccess control panel U-Prox IC E (Elevator control)
1.003 Access control panel U-Prox IC E (Elevator control) Installation and programming manual About this document http://u-prox.com This manual covers installation, adjustment and use of U-Prox IC E (hereinafter
More informationKeypad CT2000. Art. No.: , (black) Art. No.: , (white) Installation Manual
secure open Keypad CT Art. No.:, (black) Art. No.:, (white) Installation Manual CT_installation_ENGmay Conlan ApS Speditorvej A DK- Aalborg Tel: + Fax: + www.conlan.eu info@conlan.eu Table of contents.
More informationCP150B Vandal & Weather Resistant Keypad Security Systems
Vandal & Weather Resistant Keypad Security Systems EN Security System CP150B - Vandal & Weather Resistant Keypad The CP150B keypad provides alarm and or access control functionality when used on selected
More information