SOYAL AR-321H/AR-721H/ AR-725H/AR-757H ACCESS CONTROL SYSTEM. Contents AR-321H [Metal Case] AR-721H. AR-725H [Illuminated Touch-panel] AR-725H-M
|
|
- Roger Conley
- 5 years ago
- Views:
Transcription
1 SOYAL AR-H/AR-H/ AR-H/ ACCESS CONTROL SYSTEM Contents AR-H [Metal Case] Product Water proof Strip d x AR-H Product f x AR-H [Illuminated Touch-panel] AR-H-M Products c x e x A. B. C. D. AR-H Products f x A. E.. AR-X Products Tools a x e x b x A. A. B. C. G. H. D. c x Product f x P Parts a. Button Head Pozidriv Tapping Screw: Mx0 b. c. d. Button Head Pozidriv Slotting Screw:.x0 lat Head Cap Philips Tapping Screw: x9. lat Head Cap Philips Tapping Screw: x e. f. Security Torx Screw: M.x lat Head Hex Socket Screw: Mx
2 Access Metal Case / Illuminated Touch-panel Installation AR-H [Metal Case] AR-H Pull the cables from the square hole of the mounting plate. Use a screwdriver to screw the mounting plate onto the wall. Attach the water proof strip to the body, then connect the terminal cables to the body and attach the body to the mounting plate. Use the Allen key and screws (accessories supplied) to assemble the body onto the mounting plate. Turn on the power, and LED will light and beep will sound. c. AR-H [Illuminated Touch-panel] AR-H-M AR-H C. A. B.. A. A. B. C. E. e.. Pull the cables from the square hole of the mounting plate. Use a screwdriver to screw the base onto the wall. Connect the terminal cables to the body and attach the body to the mounting plate. Assemble the covers with the Allen key and screws (accessories supplied). Turn on the power and LED will light and beep will sound. A. B. D. A. d. C. Pull the cables from the square access hole of the mounting plate C. Use a screwdriver to screw the metal plate C onto the wall. Take off the plastic mounting plate B from the body A, and pull the cables through the access hole of C and B, then connect to the body A. Assemble plate B with the body A, and embed the water proof strip D onto the plastic side frame. Assemble the body A onto the mounting plate C with the Allen key and screws (accessories supplied). Turn on the power and LED will light and beep will sound. Use a screwdriver to screw the base onto the wall. Attach the water proof gasket to the body A, and pull the cables from the square hole of the base, and connect to the body A. Assemble the body A with the base. Screw A and tight with the Allen key and screws (accessories supplied). Turn on the power and LED will light and beep will sound. AR-X A. G. A. b. A. e. H. A.+A. D. a. Put on G, and attach A onto the plastic plate A, and screw it with the Allen key and screws (accessories supplied). Put the ring O on the metal frame, and put them together onto the reader A, and screw them and buckle up the buckles on the back. Embed the water proof strip D onto the frame side of the base. ollowing by the install process of AR-H-M. Notice Pull the cables from the square hole of the mounting plate. Use a screwdriver to screw the base onto the wall. Connect the terminal cables to the body and attach the body to the mounting plate. Assemble the covers with the Allen key and screws (accessories supplied). Turn on the power and LED will light and beep will sound..tubing: The communication wires and power line should NOT be bound in the same conduit or tubing..wire selection: Use AWG - Shielded Twist Pair to avoid star wiring..power supply: Don t equip reader and lock with the same power supply. The power for reader may be unstable when the lock is activating, that may make the reader malfunction. The standard installation: Door relay and lock use the same power supply, and reader use independent power supply.
3 SOYAL AR-H/AR-H/ AR-H/ ACCESS CONTROL SYSTEM Connector Table AR-H [Metal Case] khz P AR-H khz.mhz P P AR-H [Illuminated Touch-panel] khz.mhz P Cable: Door Relay Common--Point Door Sensor Exit Switch Alarm RelayPower Cable: Wiegand Beeper LED Blue White Purple White White Orange Purple Gray Thick Red Thick Black Thin Blue Thin Green k Brown Yellow () DCVAmp (N.C.) DCVAmp () DCVAmp Negative Trigger Input Negative Trigger Input or N.C. shift by J jumper and Shared Com with Door Relay DC Power V DC Power 0V Wiegand DAT: Input Wiegand DAT:0 Input Beeper Output V/00mA, Low LED Green Output V/0mA, Max LED Red Output V/0mA, Max P Cable: Module Thick Green Thick Blue RS-() RS-() khz Main Board P.MHz Main Board P Cable: Contact Rating: A VAC/VDC Tamper Switch Red Orange Yellow N.C. After S/N: 00-XXXXXX I/O Board I/O Board Connectors Comparison AR-H khz ( POptional) AR-H AR-H khz khz khz ( POptional) ( POptional) P.MHz.MHz.MHz ( POptional) ( POptional) P Cable: P (Optional) -PIN Connector Cable: P Door bell Arming Duress LED indicator Black White Purple Brown White Red White Yellow White Green White. Duress Arming BE Output AR Output DU Output/ TTL out Hi input/ Green light brighten Wiring Diagram Connector AR-H to Electric Bolt Electric Bolt E V Exit Switch V VDC Connector to Magnet Lock Magnet Lock V V VDC PB V EXIT N.C. PB V EXIT VDC V Push Button VDC V Push Button
4 Access Metal Case / Illuminated Touch-panel Connector AR-H to Electric Strike Connector to Door Sensor Electric Strike V V VDC VDC V V Alarm PB V EXIT Door Sensor ALM V N.C. CTL V Relay Outpot Module VDC V Push Button VDC V Door Sensor Connector AR-H to Reader Connector to Reader WG WG 0 BZ GLED RLED V WG WG 0 BZ GLED RLED V Converter Node ID 00 AR-E Host CH CH Door No. V Door No. VDC VDC V Node ID Door No. 9 Door No. Adding and Deleting Tag Mode/Mode Add Single Tag or Random tags Input (or Master Code) 9 UUUUU 0000 Induct the tag(s) with reader (single tag or random numbered cards one by one) Done [e.g.] readom cards with user addresses No. 00 and No. 0: Access programming mode Induct the tags one by one Done Add the Sequential tags Input (or Master Code) 9 UUUUU QQQQQ Induct the tags (Present the tag with the lowest number first.) OK [e.g.] User Address NO.0 to NO.0 have 0 pcs of sequential tags:(~): Access programming mode Close Tag into R Area(only use the tag NO.) OK Delete a Single Tag Input (or Master Code) 0 SSSSS 9 EEEEE [e.g.] Delete User Address: 000 Tag Information Access programming mode Delete a batch of Tags Input (or Master Code) 0 SSSSS 9 EEEEE CARD CODE CARD CODE [e.g.] Delete User Address: 000~00 Access programming mode SITE CODE SITE CODE Delete All Tags Input (or Master Code) 9 9 Mode At this mode, User Address = Card Code Add Tags Delete All Tags Input (or Master Code) SSSSS EEEEE OK Input (or Master Code) 9 9 [e.g.] Add User Address: 0000~0 Access programming mode OK Delete Tags Input (or Master Code) 0 SSSSS (or 9 )EEEEE OK [e.g.] Delete a tag with card code Access programming mode 0 OK
5 SOYAL AR-H/AR-H/ AR-H/ ACCESS CONTROL SYSTEM Operation process A. Enter/ Exit Program Mode Enter the program mode Input or PPPPPP [e.g.] The Default Value=, if already changed the Master Code=, input program mode accessed Exit the program mode Input Master Code modification Access programming mode 09 PPPPPPRRRRRR [Input the -digit new master code twice.] [e.g.] Set the Master code to be, input 09 B. Chang the Node ID of Reader Access programming mode 00 NNN [Node ID: 00~] C.Set up M/M/M Access programming mode 0 N [N=//] D. Set up the password M/M: Individual pass code Card or PIN: Access programming mode UUUUU PPPP [i.e. User address: 0000 and pass code:, input 0000 ] Card and PIN: Access programming mode UUUUU PPPP [i.e. User address: 0000 and pass code:, input 0000 ] M: Public pass word PIN only: Access programming mode PPPP [Input -digit pass code, default value: ] Card and PIN: Access programming mode PPPP [Input -digit pass code, default value: ] E. Dual Door Open(M/M) Requires indoor reader and outdoor readers. Access programming mode 0 [0= Dual Door Open]. Anti-pass-back(M/M) Usually, anti-pass-back is commonly applied to parking areas in order to prevent from multi-entry with one card at a time, or to situations need access and exit monitor. Reader enable Access programming mode 0 [= Anti-pass-back enable.] Card enable Access programming mode SSSSS EEEEE N [SSSSS= User address start; EEEEE= User address end; N=0(control)/ (Not control)/ (reset)] [e.g.] User address from 00 to 00 enable the anti-pass-back function: G. Auto Open Time Zone Door will keep open after the first flashing card.there are time zones supported when Stand-Alone, and time zones when it is on network. Enable/Disable auto open zone Access programming mode 0 00 [00= enable Auto-Open Time Zone; 000= disable Auto-Open Time Zone] Enable/Disable auto open door without presenting card Access programming mode 00 [00= enable Auto-Open Time Zone; 000= disable Auto-Open Time Zone] Set up open time Access programming mode 0 N HHMMhhmm N: sets of auto-open zone (N=0=st set; N==nd set) HHMMhhmm=Staring time to ending time (e.g. 0000=0:0 to :00) = days of week (Sat/ri/Thu/Wed/Tue/Mon/Sun) (= 0: disable; : enable) [e.g.] To set the second time zone as 9:0 AM to :0 PM, Monday, Wednesday and riday: Done H. Lift control Connect with AR-0ROB to control which floors the user will be able to access. Enable Access programming mode 00 [00= enable lift control] loor/ Stop Set Single floor Access programming mode UUUUU 0 UUUU=User Address =loor number (0~ floor/stop) [e.g.] User address NO., allow to access the th floor: 000 Multi floors 0 Access programming mode UUUUU S [UUUUU=User address S: sets of lift control (Input: 0~) : floors/stop setting (=0=Disable, ==Enable) [e.g.] User address NO., only to the th and the 0th floor: Access programming mode Please refer to below floor chart
6 Access Metal Case / Illuminated Touch-panel I. Setting Up the Arming Conditions:. Arming is enabled.alarm system connected Application:. Door open too long: Door is open longer than door relay time plus door close time.. orce open (Opened without a valid user card): Access by force or illegal procedure.. Door position abnormal: When power is off and then on, reader on arming bffore power off. Enable/Disable Arming status: Standby Mode Card only Card or Passcode Card and Passcode After door open Door is not open Input digit user address Induct valid card Input digit Induct valid card Input digit Input digit arming code Input digit pass code pass code Input digits arming code Induct valid card Input digits arming code arming code Enter Program Mode Enable: Access programming mode Disable: Access programming mode There is NO arming mode for M. actory default armingcode is: unction Default Value AR-H / AR-H / AR-H / 0 DDD Default Value unction Selection Value Application Attendance Auto Re-lock Auto Open Door open buttin inpu Master Reader of Network Access/Exit Anti-pass-back 0: Yes 0: Disable 0: Disable 0: Disable 0: Slave 0: Exit 0: Disable : No : Enable : Enable : Enable : Mater : Access : Enable /Stand-Alone /Stand-Alone /Stand-Alone NNN Default Value unction Selection Value Application Dual Door Open 0: Disable : Enable 0 /Stand-Alone orce Open Alarm Output 0: Disable : Enable /Stand-Alone AR-H / AR-H / AR-H DDD Default Value unction Selection ValueApplication Auto-open door without 0: Disable cards at auto open zone : Enable 00 /Stand-Alone Alarm Output/ Lift Control 0: Alarm Output : Lift Control 00 /Stand-Alone Stop Alarm by door open or door close button 0: None : Yes 0 /Stand-Alone Door bell 0: Disable : Enable /Stand-Alone Mode / Mode / Mode Selection= 0(none value)/ ( x each value) [i.e.] DDD value of Enable Auto Open + Exit by Push Button + Anti-pass-back =00+0+=; As a result of that, the command will be 0. DDD Default Value unction Selection ValueApplication Auto-open door without 0: Disable cards at auto open zone : Enable 00 /Stand-Alone Lift Control/ Duress unction 0: Lift Control : Duress 00 /Stand-Alone Stop Alarm by door open or door close button 0: None : Yes 0 /Stand-Alone Mode / Stand-Alone User Capacity Access Mode Auto-show Duty time Event log Capacity 0 Holidays Anti force Time Zone Lift Control Anti-passback M / Stand-Alone,0/,000(H).Card only.card and PIN (-digit PIN).Card or User address (-digit) + Individual PIN (-digit individual PIN) Yes 00/ 00(H)/ 000(H) Yes Yes Yes M Stand-Alone,.Card only.card and PIN (-digit public PIN= Arming PWD) No No No No No No No.Card or PIN (-digit public PIN= Duress code) 00/ M /,0/.Card only Yes 00(H)/ Yes Yes Yes.Card and PIN (-digit individual PIN) Stand-Alone,000(H).Card or PIN (-digit individual PIN) 000(H) Mode, the number of users up to, since it reads CARD CODE( digits) only, unlike that Mode/Mode read SITE CODE and CARD CODE(0 digits). actory Reset by its commands When the device is stand-alone (not networking) Access programming mode Note: After the Master Code is changed, factory reset doesn t restore the Master Code back to.
7 SOYAL AR-H/AR-H/ AR-H/ ACCESS CONTROL SYSTEM Command List unction Entering programming mode Command PPPPPP PPPPPP=Master Code, default value= Mode M/M/M Exiting programming mode M/M/M Exiting programming mode and enabling arming status Node ID setting 00 NNN NNN=Node ID M/M/M M/M (Connecting to E,or total unit is < ) Node ID setting 00 NNN VVV nnn range: 00~ NNN=Node ID of Access, VVV=Virtual E Node ID, M/M (Connecting to PC directly without via E and > ) nnn=door number; range:00~ Mifare tag / card format (Optional) 0 N N: 0=ISOA; =ISOB; =ISO9; M/M =I Code; =I Code PS.. Please select the compliance,first.. Make sure reader and card using the same compliance. Door relay time setting 0 TTT TTT=Door relay time 000= Output constantly M/MM 00~00=~00 sec. 0~09=0.~0.9 sec. Alarm relay time setting Control mode setting Arming delay time setting Alarm delay time setting Master card setting 0 TTT 0 N 0 TTT 0 TTT 0 SSSSS EEEEE TTT=Alarm relay time 00~00=~00 sec. N=Mode =Mode;=Mode;=Mode TTT=Arming delay time 00~00=~00 sec. TTT=Alarm delay time 00~00=~00 sec. SSSSS-EEEEE= ( for AR-H); M/M/M M/M/M M/M/M M/M/M M/M SSSSS=Starting user address; EEEEE=Ending user address Auto-open time zone setting 0 N HHMMhhmm N= 0(st time zone) / (nd time zone) M/M/M HHMM= Starting time; hhmm= ending time (i.e.: 0000=0:0 to :00) = days of week (Sat/ri/Thu/Wed/Tue/Mon/Sun) (= 0: disable; : enable) Master code setting 09 PPPPPPRRRRRR PPPPPP=New master code M/M/M RRRRRR=Repeat the new master code Suspend / Delete tag Set a sequence of cards as "read and access" 0 SSSSS EEEEE 0 SSSSS 9 EEEEE SSSSS EEEEE =Suspend 9 =Delete; SSSSS=Starting user address, EEEEE=Ending user address SSSSS=Starting card number M/M/M M EEEEE=Ending card number Active the suspended cards SSSSS EEEEE SSSSS=Starting user address M/M EEEEE=Ending user address Set the cards as Card mode OR PIN mode UUUUU PPPP Access mode: Card or PIN; UUUUU=user address; M/M by user address PPPP=-digit pass code 000~9999 Set the cards as Card AND PIN mode UUUUU PPPP Access mode: Card and PIN; UUUUU=user address; M/M by user address PPPP=-digit pass code 000~9999 Arming output time setting M/M: Duress code setting TTT PPPP TTT=Arming output time; 000~0=0~0 sec. PPPP=-digit pass code (default value=) M/M/M M/M/M M: Public PIN setting (Card or PIN) P.S. Duress code will be unavailable and become a public PIN at access mode Card or PIN of M Card number modification UUUUU SSSSSCCCCC UUUUU= User address; SSSSS=-digit site code; M/M CCCCC=-digit card code M/M: Arming pass code setting PPPP PPPP=-digit pass code ( default value=; disable Arming PWD=0000) M/M/M M: Public PIN setting (Card and PIN) P.S. Arming PWD code will be unavailable and become a public PIN at access mode Card PIN and of M Door open waiting time Set the card by induction(m/m) TTT 9 UUUUU QQQQQ TTT=Door open waiting time: 00~00=~00 sec.; default value: sec. UUUUU=User address; M/M/M M/M QQQQQ=Card quantity(0000=continuously inducting) Reader additional setting Lift control setting: multi-doors 0 DDD UUUUU S Please refer to function default value for details. UUUUU=User address, S= sets of lift control(0~); = assigned floor M/M/M M/M (=0: Disable, : Enable) Add/Delete tag by induction (M only) AR-0ROsite number dip switch Reader parameter setting Real time clock setting Anti-pass-back (Enable user) N NNN TTT DDD YYMMDDHHmmss SSSSS EEEEE N N=0(Delete tag); N=(Add tag) NNN=site number, TTT= relay time: 000~00=~00 sec. Please refer to function default value for details. YYMMDDHHmmss: Year/ Month/ Day/ Hour/ Min./ Sec. SSSSS=Starting user address; EEEEE=Ending user address; M M/M M/M/M M/M/M M/M N=0/Enable; N=/Disable; N=/Initial Single floor setting Dual door control/ Active or inactive arming for force open Delete all tags UUUUU NNN 9 9 UUUUU=User Address; =loor (0~ floor) Please refer to function default value for details. M/M M/M/M M/M/M
8 Access Metal Case / Illuminated Touch-panel
SOYAL AR-321H/AR-331H/ AR-721H/AR-725H/AR-757H ACCESS CONTROL SYSTEM V Contents AR-321H [Touch-panel Metal Housing] 1 Product 2 User Guide 3 Ter
SOYAL AR-H/AR-H/ AR-H/AR-H/AR-H ACCESS CONTROL SYSTEM Contents AR-H [Touch-panel Metal Housing] Product User Guide Terminal Cables Water proof Strip d x AR-H [Touch-panel Metal Housing]/ AR-H-S [Metal
More informationAR-321 (H) / AR-331 (H)/ AR-721(H) / AR-725 (H) / AR-757 (H)
AR- (H) / AR- (H)/ AR-(H) / AR- (H) / AR- (H) SOYAL ACCESS CONTROL SYSTEM V0 Contents AR- (H):Touch-panel Metal Housing Product User Guide Terminal Cables Tools Water proof Strip d x P P P P AR- (H):Touch-panel
More informationOption. AR-701B-X Fit 35mm DIN Rail or Mount directly AR-721K AR-725K AR-331K 1456 RAM. WG 26 / WG 34 Power Supply. YES Power Consumption
SOYAL ACCESS CTROL SYSTEM AR-E V0 Contents Product User Guide Panel Mounting Base WG Key-panel Reader Option AR-0B-X Fit mm DIN Rail or Mount directly AR-K AR-K AR-K Option For Stand-alone Command Setting
More informationSOYAL AR-725E-M / AR-725E / AR-725X V Contents AR-725E-M. Installation AR-725E-M AR-725E AR-725X. Parts Description AR-725E AR-725X
SOYAL ACCESS CONTROL SYSTEM AR-E-M / AR-E / AR- 0909 Contents AR-E-M Products User Guide Terminal Cables Tools P P P P c x d x A. B. C. D. P P P P AR-E Products User Guide Terminal Cables Tools P P P P
More informationSOYAL AR-725 (E-V2) V Contents AR-725 (E-V2-M) Installation AR-725 (E-V2-M) AR-725 (E-V2) AR-725 (X) Parts Description AR-725 (E-V2) AR-725 (X)
SOYAL ACCESS CONTROL SYSTEM AR- (E-V) V0 Contents AR- (E-V-M) Products User Guide Terminal Cables Tools P P P c x d x A. B. C. D. P P P P AR- (E-V) Products User Guide Terminal Cables Tools P P P e x A.
More informationECL-ACC980IP-V2/VP. Contents ECL-ACC980IP-V2. Installation ECL-ACC980IP-V2 ECL-ACC980IP-VP. Parts Description ECL-ACC980IP-VP A. B. C.
EC-ACC90IP-/P Contents EC-ACC90IP- Products User Guide Terminal Cables Tools P P P a x A. E. F. P P P P EC-ACC90IP-P Products User Guide Terminal Cables Tools P P P b x A. B. C. D. P P P P c x Parts Description
More informationAR-881(EF-MT) P4 P5 P6 P7. P7 only provide to the controller that have doorbell function.
SOYAL ACCESS CONTROL SYSTEM AR- (EF) V00 Contents Product User Guide Terminal Cables Tools Optional P P P Flat Head Cap Philips Tapping Screw: x0 Security Torx: Mx0 WG keyboard AR-(EF-DO) Installation
More informationSOYAL AR-331(EF) Contents. Front Panel & Indicator. Installation. Connector Table CN6 CN2 V Option. 4 Accessories. 2 Terminal Cables 3 Tools
SOYAL ACCESS CONTROL SYSTEM AR- (E/EF) V0 Contents Product Terminal Cables Tools Accessories Option P P Flat Head Cap Philips Tapping Screw: x0 Security Torx: Mx0 AR-(E) AR-(EF) P P P Security Torx Wrenches
More informationBiometrics Device Access controller Fingerprint & Finger Vein V Connector Table () Cable: P Wire Application Anti-Tamper Switch Wire Color Red Orange
SOYAL ACCESS CONTROL SYSTEM AR- (EF-V) / (EV-V) V Contents AR- (EF-V):Fingerprint Products User Guide Terminal Cables Tools Optional P P P AR- (EV-V):Vein P P P AR-RB Products User Guide Terminal Cables
More informationP4 P5 P6. Security trigger signal 2 Purple Security trigger signal Output 6 Thin Blue Wiegand DAT: 1 Input
SOYAL ACCESS CONTROL SYSTEM AR- (E) / (EF) V Contents AR- (EF):Fingerprint Products User Guide Terminal Cables Tools DO AR- (E) Or MT P P P P P P P P P P P P Water proof Strip Optional Products User Guide
More informationFunction Menu. 1.Add/Delete. 1. Password 2. Access Mode 3. Extend Options 4. Single Floor 5. Multi Floors 6. Enroll FP 7.
Function Menu 1.Add/Delete 2.User Setting 1. Password 2. Access Mode 3. Extend Options 4. Single Floor 5. Multi Floors 6. Enroll FP 7. Delete FP 1. Add - Card ID 2. Add - RF-learn 3. Suspend - Addr 4.
More informationCV-550SPK V2 Waterproof Keypad/Reader/Controller Installation Instructions
CV-550SPK V2 Waterproof Keypad/Reader/Controller Installation Instructions Packing List NAME MODEL/SIZE QTY Self tapping screw 0.15 x 1.06 (4mm 27 mm) Rubber plug 0.23 x 1.2 (6mm 30 mm) Star screw driver
More informationAR-721E-V2 (AR-721E-V2-X) AR-701B-X Fit 35mm DIN Rail or Mount directly 16,000 32,000. Connector CN18 Host TCP/IP. Code Pin Description
SOYAL ACCESS CTROL SYSTEM AR-E-V V0 Contents Product User Guide Panel Mounting Base (AR-E-V-X) Metal Box (AR-E-V-M) Option Option Specification CPU Memory Power Supply Power Consumption Interface / Baud
More informationDigital Keypad Introduction
K2 Digital Keypad Introduction The K02 uses the latest microprocessor technology to operate door strikes and security systems that require a momentary (timed) or latching dry contact closure. All programming
More informationEL-ST100 KEYPAD CONTROLLER
WIRING DIAGRAM EL-ST100 KEYPAD CONTROLLER WEATHER-PROOF STANDALONE ACCESS CONTROLLER WITH KEYPAD & PROXIMITY TECHNOLOGY Programming and Installation Manual NOTE: www.elock2u.com ICT at work! Version 3.6
More informationQUICK START GUIDE. 2.4 Inch Finger Vein Terminal Time Attendance & Access Control
QUICK START GUIDE 2.4 Inch Finger Vein Terminal Time Attendance & Access Control Version: 1.0 Date: Apr., 2017 1 2.4-Inch TFT LCD USB Storage Device Port Keypad& Card Reader Doorbell & LED Indicator Fingerprint
More informationCM-110SK Standalone Keypad Installation Instructions
CM-0SK Standalone Keypad Installation Instructions. Packing List Qty Name Remarks 2 2 Keypad User manual Screwdriver Wall plugs Self-tapping screws Torx screw 0.8 x 2.4 Φ(20 mm 60 mm) 0.24 x.2 Φ (6 mm
More informationCV-110SPK Standalone Keypad/Prox Access Control Installation Instructions
CV-110SPK Standalone Keypad/Prox Access Control Installation Instructions 1. Packing List Qty Name Remarks 1 1 1 2 2 1 Keypad User manual Screwdriver Wall plugs Self-tapping screws Torx screw 0.8 x 2.4
More informationPartizan PAB-FC2. Fingerprint scan time Fingerprint identification time. <0.5 s < % <0.0198% Ingress protection rating
1. Features & Technical Parameters 1.1 Features: Partizan PAB-FC2 Metal vandalproof housing Secure and reliable biometric fingerprint recognition Simple for using, wiring can be done by a user without
More informationAR-727HB-RAY AR-716E-RAY EAR-727HB-RAY Series of Controllers
AR-727HB-RAY AR-716E-RAY EAR-727HB-RAY Series of Controllers Installation and Programming Guide AR-716E-RAY EAR-727HB-RAY AR-727HB-RAY 10th August 2011 Version 1.00 Southern Office: Raytel House Brook
More informationEZTAG3 PROXIMITY AND KEYPAD DOOR ENTRY
EZTAG PROXIMITY AND KEYPAD DOOR ENTRY USER MANUAL www.espuk.com EZTAG Manual_Layout.indd 8//06 5:8:0 System Components Proximity and Reader 0 x Proximity Tags x Hex Key x Plastic wall plug x Countersunk
More informationQUICK START GUIDE. 2.4 Inch TFT Terminal Time Attendance & Access Control
QUICK START GUIDE 2.4 Inch TFT Terminal Time Attendance & Access Control Safety Precautions The following precautions are to keep user safe and prevent any damage. Please read carefully before installation.
More informationAR-727H. Technical Manual. 26 August Version 1.00
AR-727H Technical Manual 26 August 2008 Version 1.00 Southern Office: Raytel House Brook Road Rayleigh Essex, SS6 7XH Tel: (01268) 749310 Fax: (01268) 749315 Northern Office: Unit 3 Block 5 Oakbank Industrial
More informationQuick Start Guide. ProBio & ProFAC + ZKBioSecurity 3.0
Quick Start Guide ProBio & ProFAC + ZKBioSecurity 3.0 CONTENT 1 Safety Precautions...2 On Using Face Recognition Device...3 Device Overview...5 Product Dimensions & Installation...6 Power Connection...7
More informationEZTAG3 PROXIMITY AND KEYPAD DOOR ENTRY
EZTAG Manual.qxp_Layout 0/0/06 :7 Page EZTAG PROXIMITY AND KEYPAD DOOR ENTRY USER MANUAL www.espuk.com EZTAG Manual.qxp_Layout 0/0/06 :7 Page System Components Proximity and Reader 0 x Proximity Tags x
More informationStandalone Keypad Access Control. User Manual. Please read the manual carefully before use this unit
Standalone Keypad Access Control User Manual Please read the manual carefully before use this unit 1. Packing List Name Quantity Remarks Keypad 1 User manual 1 Screw driver 1 Φ20mm 60mm,Special for keypad
More informationStandalone Keypad Access Control. User Manual. SS-TS2000 Size:120*80*25 mm
Standalone Keypad Access Control User Manual SS-TS2000 Size:120*80*25 mm Please read the manual carefully before use this unit 1. Packing List Name Quantity Remarks Keypad 1 User manual 1 Screw driver
More informationSingle Door Standalone Access Control User Manual
Single Door Standalone Access Control User Manual Reading this manual carefully before install and use the device 1. Packing List Name Quantity Remarks Keypad User manual Screw driver Rubber plug Self
More informationGV-AS/EV Controller. User s Manual
GV-AS/EV Controller User s Manual Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. AS100.110.120.210.400.410.810-EV48-C
More informationWaterproof. Keypad/Reader/Controller
Waterproof Keypad/Reader/Controller User Manual W1-C W3-C User manual 1. Packing List Name Quantity Remarks Digital Keypad-W1-C/W3-C 1 User manual 1 Screw driver 1 Rubber bungs 4 6*27mm, used for fixing
More informationF6-Fingerprint. Access Control/Reader. User Manual. F6 - Simplified Instruction. (Master Code) # (Factory default:1234) Enter the Programming Mode
-Fingerprint Access Control/Reader Function Description Enter the Programming Mode - Simplified Instruction Operation (Factory default:1234) Change the Master Code Add Fingerprint User Add Card User Add
More informationEZ-TAG2 Manual_Layout 5 11/12/ :14 Page 1 U S E R M A N UAL
EZ-TAG2 Manual_Layout 5 11/12/2012 09:14 Page 1 USER MANUAL EZ-TAG2 Manual_Layout 5 11/12/2012 09:14 Page 2 Contents EZ-TAG2 and Back Plate 1 x Security Torx Key 4 x Screws and raw plugs 1 x Marking out
More information2000 Series e/em Style Keypad Installation and Programming Manual
2000 Series e/em Style Keypad Installation and Programming Manual Document Number: 6054022 Revision: 0 Date: 12/21/06 Table of Contents Table of Contents Section 1: Introduction... 6 1 Product Description...6
More informationInstruction Manual. Vogue. Security. Technology. Innovation 2013-V01
Instruction Manual DH16A-60DTE Model 60 with plastic keypad, stand alone access control DH16A-60DTQE Model 60 with plastic keypad, networked access control 2013-V01 Security Technology Vogue Innovation
More informationUser Manual. Split access control with intelligent secured power supply.
User Manual Split access control with intelligent secured power supply. Contents. Introduction, features and specifications. Installation and Wiring Diagram 3. Manager Card Operation 4. User Settings 5.
More informationW3-H Waterproof Keypad/Reader/Controller
W3-H Waterproof Keypad/Reader/Controller User Manual 1. Packing list Name Quantity Digital Keypad W3-H 1 User Manual 1 Screw Driver Rubber Bungs Self Tapping Screws Diode 1 4 4 1 Manager Card 2 Remark
More informationFingerprint Access Control F1. User Manual
Fingerprint Access Control F1 User Manual 1. Introduction F1 is a metal shell standalone fingerprint access control, using the America Atmel s MCU, with precise electron circuit and good productive technology.
More informationSafety Precautions How to place the finger Product Contents Product PIN Diagram Product Dimensions Cables and Connectors Installation of Back Plate
www.zkaccess.com Safety Precautions How to place the finger Product Contents Product PIN Diagram Product Dimensions Cables and Connectors Installation of Back Plate Power Connection Ethernet Connection
More informationDG-800 Stand-Alone Proximity Reader Instruction Manual
DG-800 Stand-Alone Proximity Reader Instruction Manual I. Features 1. Memory volume up to 1000+10 proximity cards/tokens and PINs with the programming time up to 0.5 seconds. 2. Access modes: a. Only Proximity
More informationFinger Vein Access Control device Quick Start Guide Version: 1.0 Date: June USB slot. USB slot
Overview Fingerprint & Finger Vein Device Front Left Side: Finger Vein Device Touch screen Card reader Fingerprint reader Finger vein reader Finger vein sensor: During registration, after finger touches
More informationKP2000E/EM Series Style Keypad
23852973 KP2000E/EM Series Style Keypad Installation and Programming Instructions Models KP2000EXX and KP2000EMXX Specifications Parameter Voltage Requirements Keypad Current Requirements (Max) Relay Contact
More informationGV-Card Reader. User s Manual
GV-Card Reader User s Manual Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. READER-B 2016 GeoVision, Inc. All rights
More informationGV-AS Controller. Installation Guide
GV-AS Controller Installation Guide Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. 2011 GeoVision, Inc. All rights reserved.
More informationW3-M. Metal waterproof standalone access control/reader. User Manual
W3M Metal waterproof standalone access control/reader User Manual Name Digital Keypad W3M User Manual Screw driver Rubber bungs Selftapping screws Diode 1. Packing List Quantity 1 1 1 4 4 1 Remark 6*27mm,
More informationOperation manual For NG BIOSINGLE Version 1.1
Operation manual For NG BIOSINGLE Version 1.1 SMART-I ELECTRONICS SYSTEMS PVT. LTD.(An ISO 9001:2008 certified company) R&D, Training & Customer Support Center: First Floor, Arihant Plaza Phase II, Village-Ovala,
More informationINSTALLATION INSTRUCTIONS 920P EntryCheck TM
801 Avenida Acaso, Camarillo, Ca. 93012 (805) 494-0622 www.sdcsecurity.com E-mail: service@sdcsecurity.com INSTALLATION INSTRUCTIONS 920P EntryCheck TM The EntryCheck 920P Indoor/Outdoor Keypad is a surface-mount
More informationUser Manual. PCKeypad Wireless Keypad
User Manual PCKeypad Wireless Keypad Description The PCKeypad is a wireless keypad with a PentaCODE transmitter built-in. It works with all of Elsema s PCR series receivers. The installer has the option
More informationCC Series metal access control Manual
CC Series metal access control Manual 1.Description CC Series is a standalone for two doors, support card, pin, card+pin access way. It is with 2 relays to control 2 doors and supports up to 2000 users
More informationSpecifications: Features:
ROFU Features: Applicable card mode EM Card / Key Fob 1 Administrator and 200 Users 200 Proximity Cards / Key fobs Access Modes:Use Bluetooth smartphone or Card / Key fob to access Built-in Tamper alarm
More informationACCESS CONTROL SYSTEM
ACCESS CONTROL SYSTEM System versions Standalone controllers series based on integrated models KZ-400, 500, 600, 700, KZC-300,800, 900 KaDe Lite system based on integrated controllers KZ-1000 KaDe Premium
More informationTEC100 USER/INSTALLER MANUAL V2.0 REV. 03/2018
TEC100 USER/INSTALLER MANUAL V2.0 REV. 03/2018 00. CONTT 01. SAFETY INSTRUCTIONS INDEX 01. SAFETY INSTRUCTIONS STANDARDS TO FOLLOW 02. PRODUCT PRODUCT PROFILE TECHNICAL PARAMETERS 03. INSTALLATION PRODUCT
More informationW Series. Color Screen Fingerprint & Card Time Attendance and Access Control W 1 W 2
W Series Color Screen Fingerprint & Card Time Attendance and Access Control W 1 W 2 W1 & W2 Features * Standard 2.8-inch TFT LCD, 512MB Flash, industrial high speed CPU * Touch keypad & touch active sensor
More information9212i INSTALLATION. Stand-Alone Keypad. Instructions
INSTALLATION 9212i Stand-Alone Keypad Instructions Features: 4 Independent Outputs 4 Independent Timers All Outputs Assignable by Code On board 5 Amp Form C Relay 120 Users Remote Triggering Input Keypad
More informationWELCOME. For customer support or any inquiries, please visit our web site at or contact us at
WELCOME Congratulations on purchasing the GBF Smart Four Wire Intercom System. Our factory engineers were the first to enable multiple security cameras being monitored through a smart mobile device and
More informationGV-RK1352 and GV-R1352 Card Reader
GV-RK1352 and GV-R1352 Card Reader The GV-RK1352 and GV-R1352 are card readers designed to recognize identifications cards. GV-RK1352 comes with keypad, allowing it to also recognize PIN codes. Featured
More informationINSTALLATION INSTRUCTIONS 920 EntryCheck TM
801 Avenida Acaso, Camarillo, Ca. 93012 (805) 494-0622 www.sdcsecurity.com E-mail: service@sdcsecurity.com INSTALLATION INSTRUCTIONS 920 EntryCheck TM The EntryCheck 920 Indoor/Outdoor Keypad is a surface-mount
More informationDOLXFD1000B. Waterproof Access Control/Reader
DOLXFD1000B Waterproof Access Control/Reader INTRODUCTION The DOLXFD1000B is a single- entry multi-function Access Controller with integrated keypad and card reader. It is designed and manufactured to
More informationACTpro Single Door IP Controller. Operating & Installation Instructions
ACTpro 1500 Single Door IP Controller Operating & Installation Instructions 18-00079 Issue 1 This manual refers to the ACTpro 1500 a TCP/IP based control unit supporting up to 32 doors. Access Control
More informationWiring Diagram and Programming Instructions for MAW6 Digital Keypad and Proximity Card/F reader
Wiring Diagram and Programming Instructions for MAW6 Digital Keypad and Proximity Card/F reader www.grantsautomation.com.au grant@grantsautomation.com.au Wiring Diagrams for MAW6 Digital Keypad For Pedestrian
More information212iL Rev. 1.1
212iL 1 International Electronics, Inc. 427 Turnpike Street Canton, Massachusetts 02021 212iL (illuminated Luxury) Keypad Single Unit Keypad- Control Installation Manual Features: 120 User Capability Illuminated
More informationINSTALLATION GUIDE 2.4 Inch TFT Terminal Time Attendance & Access Control
STALLATION GUIDE.4 Inch TFT Terminal Time Attendance & Access Control Optional accessories Safety Precautions The following precautions are to keep user s safe and prevent any damage. Please read carefully
More informationGV-AS/EV Controller. User s Manual
GV-AS/EV Controller User s Manual Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. ASEV-H 2016 GeoVision, Inc. All rights
More informationAS Keypad User Manual
AS Keypad User Manual Specifications Operating Voltage: 12~24 VAC/DC Current Draw: TBA Input: request-to-exit (for Relay 1) time out reed switch contact (for Relay 1) Output: Relay 1: N.O./N.C./Com. Output
More informationREX F-0-9 Standalone or Access Controller
REX F-0-9 Standalone or Access Controller Power supply The controller need s external power supply to operate. The Spider W40 power supply is sufficient to power two controllers and two 12V electric strikes
More informationWiring Guide EP.NMINI. Version 1.02 Last Updated:
Wiring Guide EP.NMINI Version 1.02 Last Updated: 14-10-2014 1 Note: See http://www.entrypass.net/ for updates, revisions, and download the latest installation manual There are currently 2 version of EntryPass
More informationFingerprint Identification Proximity Reader. Quick Installation Guide
Fingerprint Identification Proximity Reader Quick Installation Guide 1. WHAT S INCLUDED Please unpack and check the contents of the box. If any of these parts are missing, please contact a nearby distributor
More informationConnecting a Cisco Reader Module
CHAPTER 3 Overview The optional Cisco Reader Module (Figure 3-1) is similar to the Cisco Physical Access Gateway, providing the same ports for Weigand readers and other input and output devices. The Cisco
More informationTwo Door Controller GEN-045
Australian Owned, Designed and Manufactured Two Door Controller GEN-045 Genesis Electronics Australia Pty Ltd www.genesiselectronics.com.au Distributed by: Genesis reserves the right to change or modify
More informationPR602LCD v1.0 Installer Manual Rev. A
PR602LCD v1.0 Installer Manual Rev. A Introduction This document contents minimum information required for electrical connections and installation of the PR602LCD access controller in Roger Access Control
More informationSF200. Installation Guide & Quick Start Guide. 2 TFT AC Terminal Version: 1.0 Date: June 2014
SF200 Installation Guide & Quick Start Guide 2 TFT AC Terminal Version: 1.0 Date: June 2014 All design and specification declared are subject to change without notice in advance. Contents Safety Precautions
More informationMS-7000: SuperStar Reader
The MS-7000 SuperStar Reader The MS-7000 SuperStar Reader is intended for installation in proximity applications where an extended read range is required. The reader provides an audio beeper and a multi
More informationStandalone Access Control
Standalone Access Control BELL_A BELL_B D0 D1 D_in(LED) Open (BZ) COM ALARM- Light Green Pink Red Black Green White Brown Yellow Blue Purple Orange Grey Door Bell DC 12V Power Green White Reader Red Black
More informationClick Save to return to the main Setup screen.
ON-SITE Setup Guide Thank you for purchasing the ON-SITE. This guide will assist you in the setup of the system. You can call for FREE technical support to get help anytime at 757-258-0910. Please note,
More informationINSTALLATION INSTRUCTIONS Model 930 EntryCheck
SECURITY DOOR CONTROLS 3580 Willow Lane, Westlake Village, CA 91361-4921 (805) 494-0622 Fax: (805) 494-8861 www.sdcsecurity.com E-mail: service@sdcsecurity.com INSTALLATION INSTRUCTIONS Model 930 EntryCheck
More informationINSTALLATION INSTRUCTIONS 921P EntryCheck TM
80 Avenida Acaso, Camarillo, Ca. 90 (805) 494-06 www.sdcsecurity.com E-mail: service@sdcsecurity.com INSTALLATION INSTRUCTIONS 9P EntryCheck TM The EntryCheck 9P Indoor/Outdoor Keypad is a surface mount
More informationMODEL KP-100 ACCESS CONTROL DIGITAL KEYPAD OPERATING INSTRUCTIONS
MODEL KP-100 ACCESS CONTROL DIGITAL KEYPAD OPERATING INSTRUCTIONS Model KP-100 is a self-contained digital keypad. This keypad is suitable for residential, industrial, and commercial installations. It
More informationKey Switch. Document version: 1.5 (Updated 02 May 2017)
Key Switch Document version: 1.5 (Updated 02 May 2017) Contents ii Contents 1 Key Switch R10S.3... 4 2 Quick Guides...4 2.1 Controlling an Electric Lock...5 2.2 Controlling an Alarm System... 5 2.3 Controlling
More informationHSY-S209 EM Metal waterproof access control system User Manual
HSY-S209 EM Metal waterproof access control system User Manual Reading carefully before Install and use this manual 1. Product Profile The product is Contact-less inductive card Metal Password Access Controller,
More informationInstallation Guide for PR311SE and PR311SE-BK v1.0 Access Controllers Rev. B
Installation Guide for PR311SE and PR311SE-BK v1.0 Access Controllers Rev. B Introduction This document contains minimum information that is necessary to properly install the device and to perform its
More informationADVANTAGE DKE QUICK START GUIDE. 2 Make sure you have everything shown here. 3. What s what? All important internal components labeled for you
1 of 6 START HERE 1 Carefully unpack box. 2 Make sure you have everything shown here. 3 Unlock and remove front panel of keypad unit, then using carriage bolts and hex nuts, attach unit to pedestal as
More informationOperation Manual. Thank you for selecting Keyking products. Please read this manual thoroughly before use. Models: TC418/419 Standalone Controller
Operation Manual Thank you for selecting Keyking products. Please read this manual thoroughly before use. Models: TC418/419 Standalone Controller KEYKING GROUP Index Chapter 1: Summay...3 1.1 Outline...3
More informationWiring Guide. EP.NMiNi 2. Version 1.04 Last Updated:
Wiring Guide EP.NMiNi 2 Version 1.04 Last Updated: 31-01-2013 Before you begin Technical Support If you cannot find the answer to your question in this manual or in the Help files, we recommend you contact
More informationIndoor/Outdoor Proximity Reader and Keypad with 10cm (4in) Read Range
Indoor/Outdoor Proximity Reader and Keypad with 10cm (4in) Read Range Stand alone CR-R885-SB Installation and Operating Instructions V1.1 TABLE OF CONTENTS Installation... 2 Mounting and Wiring... 2 Mounting
More informationTwo-door Access Controller
Two-door Access Controller Quick Start Guide V1.0.0 Preface Overview This document elaborates on structure, installation, interface and wiring of two-door access controller. Symbol Definition The following
More information232iLM Keypad Installation and Programming Instructions
232iLM Keypad Installation and Programming Instructions Note: This product is designed to be installed and serviced by security and lock industry professionals. Specifications Case Dimensions: 6 1 / 2
More informationOperating Instructions KEYPAD. Compatible WIRELESS ACCESS CONTROL
Operating Instructions KEYPAD Compatible WIRELESS ACCESS CONTROL Contents Technical specifications page 1 Approvals page 1 Changing the Master code page 2 Adding a User code page 3 Deleting a User code
More informationgenesis TECHNICAL MANUAL Two-Door Controller GEN-045
Two-Door Controller GEN-045 Genesis Electronics Australia Pty Ltd www.genesiselectronics.com.au info@genesiselectronics.com.au Australian Owned, Designed and Manufactured Distributed By:- Genesis reserves
More informationU-FLASH Setup Guide U-FLASH.
U-FLASH Setup Guide Thank you for purchasing the U-FLASH. This guide will assist you in the setup of the system. You can call for FREE technical support to get help anytime at 757-258-0910. Please note,
More informationRD-SR2 ACCESS SECURITY PRODUCTS LTD. Proximity Card Reader with Remote Control. User Manual
RD-SR2 Proximity Card Reader with Remote Control User Manual INTRODUCTION The RD-SR2 is a compact, weather resistant multi-function card reader that can be used as a standalone programmable access control
More informationVANDAL RESISTANT BACK-LIT WEATHERPROOF ACCESS CONTROL KEYPAD
VANDAL RESISTANT BACK-LIT WEATHERPROOF ACCESS CONTROL KEYPAD Post Mount Keypad Programming & Installation Manual 1. Connect Power 12V DC to 24V AC/DC to terminals (+) and (-) Post Mount Keypad Quick Start
More informationMS-5000: MiniStar Reader
The MS-5000 MiniStar Reader The MS-5000 MiniStar Reader is intended for installation in a single gang electrical "J-Box," in proximity applications where an unobtrusive reader is required. It can also
More informationSL2000E. Status Output. Electronic Code Lock. Features. Input. Exit Button Input. Introduction. Door Contact Input. Functional Description.
SL2000E Electronic Code Lock Features Door Relay output Status transistor output Aux transistor output Door Contact input Exit Button input INSTALLER code for programming MASTER code for arming/disarming
More informationInstallation Instructions
Alliance Arming Station AL-1111, AL-1116 1048520C September 2006 Copyright 2006, GE Security Inc. Introduction This is the GE Alliance Arming Station for models AL-1111 (four-line LCD) and AL-1116 (four-line
More informationE-Access ANXELL TECHNOLOGY CORPORATION E3AK4 E3AK2. Specifications Voltage (Input): 12 to 24 VDC
E-Access E3AK1 E3AK2 E3AK3 E3AK4 4-3/4" x 2-15/16" x 1-13/16" (120 x 74 x 46.2 mm ) 4-1/2" x2-3/4" x1-5/8" (114 x 70 x 41 mm) 4-13/16" x 3" x 2-1/2" (123 x 77 x 64.2 mm) 3-7/16" x 3-7/16" x 1-3/4" (87.3
More informationKeypad CT2000. Art. No.: , (black) Art. No.: , (white) Installation Manual
secure open Keypad CT Art. No.:, (black) Art. No.:, (white) Installation Manual CT_installation_ENGmay Conlan ApS Speditorvej A DK- Aalborg Tel: + Fax: + www.conlan.eu info@conlan.eu Table of contents.
More informationACCESS CONTROL QUICK INSTALL GUIDE. tel: +44 (0) fax: +44 (0) web:
ACCESS CONTROL QUICK INSTALL GUIDE tel: +44 (0)1457 874 999 fax: +44 (0)1457 829 201 email: sales@cop-eu.com web: www.cop-eu.com WIRING CONFIGURATION - ACS CONTROLLERS CONNECTIONS Dahua access controllers
More informationRBR-SB-KTZ001 LAR 2. User Manual
RBR-SB-KTZ001 LAR 2 User Manual INTRODUCTION KTZ001 is a compact, waterproof stand-alone programmable access control system that provides proximity entry for up to 2000 users. Read both EM and HID card.
More informationDG Series. Access Control Proximity Readers DG-160 DG-800
DG Series Access Control Proximity Readers DG-800 + DG-160 + Features: Applicable card modeem Card / Key Fob 1 Administrator and 200 Users 200 Proximity Cards / Key fobs Access ModesUse Bluetooth smartphone,
More informationFTK5 PROXIMITY KEYPAD
FTK5 PROXIMITY KEYPAD Before using the unit, please read the instructions and retain for future reference 1 There are 600 user codes (fobs or cards) and 1 programming code: Careful administration records
More informationInstallation Instructions (KF-2000)
VERSION 2005. 10 Installation Instructions (KF-2000) Keico Hightech, Inc. Installation Instructions KF-2000 Keico Hightech Ace Twin Tower I 12 th FL 212-1, Guro-Dong, Guro-Gu Phone +82-2-853-9000 Fax +82-2-830-7809
More information