Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable Increased ability to withstand vibration and installation errors. Eliminates machine downtime and repairs. Sturdy "Safety-Lock TM Design bearing structure Fewer components and connection points increase the operational reliability Kübler OptoASIC technology with highest integration density (Chip-on- Board) Remains sealed, even in the roughest environments, ensures highest safety against field breakdowns Resistant die cast housing and protection up to IP 67 Can be used in a wide temperature range without additional expense Wide temperature range RoHS Fast Fast data availability while reducing the load on the bus and the control Intelligent functions like the transmission of speed, acceleration or exiting a working area Fast, simple and error-free connection / Versatile Up-to-the minute field bus performance in the application Profibus-DPV0 with the current encoder profile supports Class and Class Enhanced programming possibilities Connection options Bus cover with M connector or cable connection Fast start-up with pre-defined GSD file A variety of scaling options for the most diverse applications 6 bit singleturn resolution Comprehensive diagnostics, programmable to Class Reliable installation in a wide diversity of mounting situations Extensive choice of proven mounting options also available in seawater resistant version, certified acc. to salt-spray test IEC 68-- => 67 hours. Mechanical characteristics: Max. speed without shaft seal (IP 65) up to 70 C: 9 000 min -, continuous 7 000 min - Max. speed without shaft seal (IP 65) up to Tmax: 7 000 min -, continuous 4 000 min - Max. speed with shaft seal (IP 67) up to 70 C: 8 000 min -, continuous 6 000 min - Max. speed with shaft seal (IP 67) up to Tmax: 6 000 min -, continuous 000 min - Starting torque without shaft seal (IP65): < 0.0 Nm Starting torque with shaft seal (IP67): Shaft version: < 0,05 Nm Hollow shaft version: <0.0 Nm Moment of inertia: Shaft version:.0 x 0-6 kgm Hollow shaft version: 6.0 x 0-6 kgm Radial load capacity of shaft: 80 N Axial load capacity of shaft: 40 N Weight: approx. 0.5 kg with bus terminal cover approx. 0.50 kg with fixed connection Protection acc. to EN 60 59: housing: IP 67, shaft: IP 65, opt. IP 67 EX approval for hazardous areas: optional zone and Working temperature: 40 C... +80 C Materials: Shaft: stainless steel, Flange: aluminium, Housing: die cast zinc Shock resistance acc. to DIN-IEC 68--7: >500 m/s, 6 ms Vibration resistance acc. to DIN-IEC 68--6: >00 m/s, 55... 000 Hz 0 www.kuebler.com /008
General electrical characteristics: Supply voltage: 0... 0 V DC Current consumption 4 V DC, max.90 ma (w/o output load): Reverse polarity protection Yes at power supply (Ub): UL certified File 468 Conforms to CE requirements acc. to EN 6000-6-, EN 6000-6-4 and EN 6000-6- RoHS compliant acc. to EU guideline 00/95/EG SET control button (zero or defined value, option) Protected against accidental activation, can only be pushed in with the tip of a ball pen or similar. Diagnostic LED (yellow) LED on with: Sensor error: Profibus error Interface characteristics Profibus-DP Singleturn resolution (max, scaleable): Code:... 6556 (6 bits), default scale value is set to 89 ( bits) Binary Baud rate: Node address: Termination switchable: Mbits/s... 7 (set by rotary switches) Set by DIP switches Absolute Encoders Interface: Specification according to Profibus-DP.0 Standard (DIN 945 part ) Protocol: Profibus Encoder Profile V. Class and Class with manufacturer-specific enhancements Profibus Encoder-Profile V. The PROFIBUS-DP device profile describes the functionality of the communication and the user-specific component within the PROFIBUS field bus system. For encoders, the encoder profile is definitive. Here the individual objects are defined independent of the manufacturer. Furthermore, the profiles offer space for additional manufacturer-specific functions; this means that PROFIBUS-compliant device systems can be used now with the guarantee that they are ready for the future too. The following parameters can be programmed: Direction of rotation Scaling/Number of steps per revolution Preset value Diagnostics mode The following functionality is integrated: Galvanic isolation of the bus stage with DC/DC converter Line driver acc. to RS 485 max. MB Address programmable via DIP switches Diagnostics LED Full Class and Class functionality Terminal assignment with terminal box: Signal : BUS IN BUS OUT B A 0 V + V 0V + V B A Pin : 4 5 6 7 8 Shield must be connected to the cable gland (with the contact surface as large as possible) Terminal assignment M connector version: 5 : Signal : BUS-A BUS-B Shield Pin: 4 5 4 4 Power supply: Signal : U B 0 V Pin: 4 : Signal : BUS_VDC ) BUS-A BUS_GND ) BUS-B Shield Pin: 4 5 4 5 ) for powering an external Profibus-DP terminating resistor /008 www.kuebler.com
Dimensions shaft version: With removable bus terminal cover: ø 58 mm, Synchro flange Flange type and 4 (Drawing with cable version) 57 [,4] 50 [,97] 58 50 [,8] [,97] D h8 40 [,57] 60 [,6] X [0,] [0,] 4 [0,6] 75 [,95] 76 [,0] 0 [,8] 4,5 [0,57] 4 [,65] x 0 xm4, 6 [0,4] deep Status LED SET button ø 58 mm, Clamping flange Flange type and (Drawing with x M connector) 57 [,4] 58 [,8] 6 f8 [,4] D h8 40 [,57] 60 [,6] X 0 [0,9] 65 [,56] 66 [,6] 0 [,57] 4,5 [0,57] 0 48 [,89] x 0 xm, 6 [0,4] deep xm4, 4 [0,] deep 6,5 mm, Square flange Flange type 5 and 7 (Drawing with cable version) 57 [,4],75 [,5] D h8 40 [,57] 60 [,6] X 7, [0,8] 7,5 [0,] 0 [,8] 67,5 [,66] 68,5 [,7] 4,5 [0,57] 5,5 [0,] 5,4 [,06] 6,5 [,5] www.kuebler.com /008
Order code shaft version: 8. 5 8 5 8. X X X X. X X X Type Flange Shaft = Clamping flange ø 58 IP 65 = Synchro flange ø 58 mm, IP65 = Clamping flange ø 58 mm, IP 67 4 = Synchro flange ø 58 mm, IP67 5 = Square flange,5" / 6,5 mm, IP 65 7 = Square flange,5" / 6,5 mm, IP 67 = Shaft 6 mm x 0 mm (ø x L) ) = Shaft 0 mm x 0 mm (ø x L) ) = Shaft /4" x 7/8" (ø x L) 4 = Shaft /8" x 7/8" (ø x L) Options (service) = no Option = SET Field bus profile = Profibus DP-V0 Encoder profile Class Type of connection = with removable bus terminal cover, with radial screwed cable passage = Removable bus terminal cover with x M connector - seawater resistant version on request Absolute Encoders Output circuit / Power supply = Profibus DP V0 Encoder Profile V 0... 0 V DC ) Preferred type with flange type ) Preferred type with flange type Preferred types are indicated in bold Use Couplings for the connection BUS-IN and Connectors for the connection BUS-OUT. Compatible self-assembly connectors: Connector (BUS-OUT): 05.BMSWS.85-8.5 Coupling (BUS-IN): 05.BM WS.85-8.5 Accessories: Cables and connectors, also pre-assembled, can be found in the chapter Connection Technology Mounting attachments and couplings can be found in the chapter Accessories /008 www.kuebler.com
Dimensions hollow shaft version With removable bus terminal cover: ø 58 mm, Flange with long torque stop Flange type and (Drawing with x M connector) Y 4,5 [0.57] [0.09],4 57 [.5] 49,5 [.95] 4 [0.55],99-0.0 [0.6] [.] max. 40 [.57] 60 [.6] x 0 6,7 [.44] 40,9 [.6] 4 [0.6] 9 [0.75] 7 [.8] 80,4 [.5] 4 [.65] DH7 Torque stop slot, Recommendation: cyl. pin. acc. DIN 7 Ø4 xm, 5,5 [0.] deep ø 58 mm, Flange with stator coupling Flange type 5 and 6, pitch circle ø 6 mm (Drawing with cable version) Y 4,5 [0.57] 57, [.6] max. [.] 0,8 [0.0] 40 [.57] 60 [.6] [.68] 68 6 [.48] D H7 4 [0.6] 9 [0.75] 5 7, [.89] [0.], 0 [0.79] 8, [.0] Fastening screw DIN 9 M x 8, washer included ø 58 mm, Flange with stator coupling Flange type and 4, pitch circle ø 65 mm (Drawing with x M connector) 57 [.5] 49,5 [.95] Y 4,5 [0.57] x0 4, [0.7] max. [.] 40 [.57] 60 [.6],5 [0.09] 8, [.8] 84,4 [.5] 9 [0.75] 65 [.56] DH7 Y: Depth for blind hollow shaft: 0 mm 4 www.kuebler.com /008
Order code hollow shaft version: 8. 5 8 7 8. X X X X. X X X Type Flange = Flange with torque stop IP 65 = Flange with torque stop IP 67 = Flange with stator coupling pitch circle ø 65, IP 65 4 = Flange with stator coupling pitch circle ø 65, IP 67 5 = Flange with stator coupling pitch circle ø 6, IP 65 6 = Flange with stator coupling pitch circle ø 6, IP 67 Hollow shaft = ø 0 mm 4 = ø mm 5 = ø 4 mm 6 = ø 5 mm 8= ø 9,5 mm [/8 ] 9 = ø,7 mm [/ ] Output circuit / Power supply = Profibus DP V0 Encoder Profile V 0... 0 V DC Preferred types are indicated in bold Options (service) = no option = SET button Field bus profile = Profibus DP-V0 Encoder profile Class Type of connection = With removable bus terminal cover, with radial screwed cable passage = Removable bus terminal cover with x M connector - seawater resistant version on request Use Couplings for the connection BUS-IN and Connectors for the connection BUS-OUT. Compatible self-assembly connectors: Connector (BUS-OUT): 05.BMSWS.85-8.5 Coupling (BUS-IN): 05.BM WS.85-8.5 Cables and connectors, also pre-assembled, can be found in the chapter Connection Technology Mounting attachments and couplings can be found in the chapter Accessories Absolute Encoders /008 www.kuebler.com 5