Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Features Size ø58 mm Precise optical sensing Output signal level TTL or HTL EURO flange B Connection axial, radial or tangential Pulses per revolution up to 5000 High protection up to IP 67 High resistance to shock and vibrations EIL580 with EURO flange B Technical data - electrical ratings Voltage supply 5 VDC ±5 % 8... VDC 4.75... VDC Reverse polarity protection Yes Short-circuit proof Yes (HTL) Yes (TTL, max. 1 s and 1 signal) Consumption w/o load 70 m Pulses per revolution 0...5000 Phase shift 90 ± Scan ratio 40...60 % Reference signal Zero pulse, width 90 ± % Sensing method Optical Output frequency 0 khz (TTL) 160 khz (HTL) Output signals +, B+, R+, -, B-, R- Output stages TTL/RS422 HTL/push-pull Interference immunity DIN EN 600-6-2 Emitted interference DIN EN 600-6-3 pproval UL 508 / CS 22.2 Technical data - mechanical design Size (flange) Shaft type dmitted shaft load Protection DIN EN 60529 ø1 mm ø11 x mm solid shaft with 40 N axial 80 N radial IP 65 (without shaft seal), IP 67 (with shaft seal) Operating speed 6000 rpm (+20 C, IP 67) 12000 rpm (+20 C, IP 65) Starting torque 0.0 Nm (+20 C, IP 65) 0.02 Nm (+20 C, IP 67) Materials Housing: aluminium die-cast Flange: aluminium Solid shaft: stainless steel Operating temperature -40...+85 C Relative humidity 90 % non-condensing Resistance DIN EN 60068-2-6 Vibration g, -2000 Hz DIN EN 60068-2-27 Shock 0 g, 6 ms Connection Flange connector M12, 8-pin Flange connector M23, 12-pin Cable Weight approx. 485 g 1
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Part number EURO flange B EIL580-S 1 B1... Pulse number - see table E H N Q Voltage supply / output stages 5 VDC, TTL/RS422, 6 channel 8... VDC, TTL/RS422, 6 channel 8... VDC, HTL/push-pull, 6 channel 4.75... VDC, HTL/push-pull, 6 channel R L F B T U D P Q Connection Cable radial, 1 m Cable radial, 2 m Flange connector M23, 12-pin, radial, male, ccw Flange connector M12, 8-pin, radial, male, ccw Cable axial, 1 m Cable axial, 2 m Flange connector M23, 12-pin, axial, male, ccw Flange connector M12, 8-pin, axial, male, ccw Cable tangential, 1 m Cable tangential, 2 m Protection 5 IP 65 7 IP 67 Specification solid shaft B1 ø11 x mm, with Pulse number Flange 1 EURO flange B 0 0 720 1250 2500 120 360 800 1440 00 0 400 900 00 3600 200 500 00 1800 4000 250 512 24 2000 4096 256 600 1200 2048 5000 ccessories Mounting accessories K 35 Spring washer coupling for solid shaft ø6...12 mm K 50 Spring washer coupling for solid shaft ø11...16 mm K 60 Spring washer coupling for solid shaft ø11...22 mm 2
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Output signals Trigger level Outputs TTL/RS422 Output level High 2.5 V Output level Low 0.5 V Load 20 m Terminal assignment Flange connector M23, 12-pin / cable Pin Core color ssignment 1 pink B- 2 3 blue R+ 4 red R- 5 green + 6 yellow - 7 8 grey B+ 9 white GND 11 12 brown UB Screen: Connected to housing Cable data: PVC, [4x2x0.14 mm 2 ], bending radius > mm, outer diameter 6.5 mm 2 3 4 1 9 11 8 12 5 7 6 Outputs Output level High Output level Low Load HTL/Push-pull UB -3 V 1.5 V 20 m Flange connector M12, 8-pin Pin ssignment 1 GND 2 UB 3 + 4-5 B+ 6 B- 7 R+ 8 R- 7 6 1 2 8 5 3 4 3
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse EURO flange B, flange connector M12, radial 0.02 51.4 11.8 3 ø0 M12x1 EURO flange B, flange connector M23, radial 0.02 3 55.5 14.4 M23x1 ø0 4
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse EURO flange B, cable radial 0.02 ~52 11.8 3 ø0 EURO flange B, flange connector M12, axial 0.02 22 11 M12x1 3 ø0 5
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse EURO flange B, flange connector M23, axial 0.02 26 8.5 M23x1 3 ø0 EURO flange B, cable axial 0.02 ~25 11 3 ø0 6
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse EURO flange B, cable tangential 0.02 128 3 ø0 19.5 7