ENCODER Profibus Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Technical Data Profibus Interface Connection Technical Drawing......3...4...4...5 - Solid shaft: maximum diameter 0 mm - Blind hollow shaft: maximum diameter 5 mm - Housing diameter 58 mm - Protection class up to IP67 - Total resolution up to 8 Bit - Maximum revolution speed 9000 turns/min - Temperature range -40...+80 C 9.03.7
- - The multiturn encoders Sendix 5868 and 5888 with Profibus interface and optical sensor technology are the ideal solution for all Profibus applications. With a maximum resolution of 8 bits these encoders are available with blind hollow shaft up to 5 mm. RoHS / -40... +80 C IP Mechanical drive Safety-ock TM High rotational speed Temperature range High protection level High shaft load capacity Magnetic field proof Shock / vibration resistant Reverse polarity protection SinCos Reliable Tried-and-tested in applications with the highest demands, such as in wind energy or mobile automation. Absolutely reliable operation in areas with strong magnetic fields, thanks to mechanical gear with optical sensor technology. Flexible Fast, simple, error-free connection using versions with M connector. Wide-ranging programming options thanks to latest encoder profile. Order code Shaft version 8.5868 Type. X X 3 X. 3 X a b c d e f a Flange = clamping flange, IP65 ø 58 mm [.8 ] 3 = clamping flange, IP67 ø 58 mm [.8 ] = synchro flange, IP65 ø 58 mm [.8 ] 4 = synchro flange, IP67 ø 58 mm [.8 ] 5 = square flange, IP65 63.5 mm [.5 ] 7 = square flange, IP67 63.5 mm [.5 ] c Interface / power supply 3 = V0 encoder profile V., 0... 30 V DC d Type of connection, removable bus terminal cover = with radial cable gland fitting = with 3 x radial M connectors e Fieldbus profile 3 = V0 encoder profile class f Options (service) = no option 3 = SET button b Shaft (ø x ), with flat = 6 x 0 mm [0.4 x 0.39 ] ) = 0 x 0 mm[0.39 x 0.79 ] ) 3 = /4 x 7/8 4 = 3/8 x 7/8 Optional on request - Ex / - surface protection salt spray tested - seawater resistant (stainless steel V4A) Salt spray tested / stainless steel V4A as standard types (deliverable as from unit) salt spray tested: stainless steel V4A: 8.5868.33.3-C V4A 8.5868.33.3-V4A.4404
- 3 - Order code Hollow shaft 8.5888 Type. X X 3 X. 3 X a b c d e f If for each parameter of an encoder the underlined preferred option is selected, then the delivery time will be 0 working days for a maximum of 0 pieces. Qts. up to 50 pcs. of these types generally have a delivery time of 5 working days. a Flange = with spring element, long, IP65 = with spring element, long, IP67 3 = with stator coupling, IP65 ø 65 mm [.56 ] 4 = with stator coupling, IP67 ø 65 mm [.56 ] 5 = with stator coupling, IP65 ø 63 mm [.48 ] 6 = with stator coupling, IP67 ø 63 mm [.48 ] c Interface / power supply 3 = V0 encoder profile V., 0... 30 V DC d Type of connection, removable bus terminal cover = with radial cable gland fitting = with 3 x radial M connectors e Fieldbus profile 3 = V0 encoder profile class f Options (service) = no option 3 = SET button b Blind hollow shaft (insertion depth max. 30 mm [.8 ] ) 3 = ø 0 mm [0.39 ] 4 = ø mm [0.47 ] 5 = ø 4 mm [0.55 ] 6 = ø 5 mm [0.59 ] 8 = ø 3/8 9 = ø / Optional on request - Ex / - surface protection salt spray tested - seawater resistant (stainless steel V4A) Salt spray tested / stainless steel V4A as standard types (deliverable as from unit) salt spray tested: stainless steel V4A: 8.5888.43.3-C V4A 8.5888.43.3-V4A 8.5888.53.3-C.4404 Mounting accessory for shaft encoders Order no. Coupling bellows coupling ø 9 mm [0.75 ] for shaft 6 mm [0.4 ] 8.0000.0.0606 bellows coupling ø 9 mm [0.75 ] for shaft 0 mm [0.39 ] 8.0000.0.00 Mounting accessory for hollow shaft encoders Dimensions in mm [inch] Order no. Cylindrical pin, long with fixing thread 8.000.4700.0000 for flange with spring element 8 0,3 (flange type + ) 5 0, SW7 [0,8] 0,6 0,6 4 m8 M4 30,8 R7 0,8 Connection technology Cordset, pre-assembled M female connector with coupling nut for bus in, 5-pin 5 m [6.40 ] PUR cable M male connector with external thread for bus out, 5-pin 5 m [6.40 ] PUR cable M female connector with coupling nut for power supply, 4-pin m [6.56 ] PUR cable Order no. 05.00.60.3.005M 05.00.60.34.005M 05.00.606.6.00M Connector, self-assembly (straight) M female connector with coupling nut for bus in, 5-pin 05.BMWS 85-8.5 M male connector with external thread for bus out, 5-pin 05.BMSWS 85-8.5 M female connector with coupling nut for power supply, 4-pin 05.B84-0
- 4 - Technical data Mechanical characteristics Maximum speed IP65 up to 70 C [58 F] 9000 min -, 7000 min - (continuous) IP65 up to Tmax 7000 min -, 4000 min - (continuous) IP67 up to 70 C [58 F] 8000 min -, 6000 min - (continuous) IP67 up to Tmax 6000 min -, 3000 min - (continuous) Starting torque - at 0 C [68 F] IP65 < 0.0 Nm IP67 < 0.05 Nm Mass moment of inertia shaft version 3.0 x 0-6 kgm hollow shaft version 7.5 x 0-6 kgm oad capacity of shaft radial 80 N axial 40 N Weight with bus terminal cover approx. 0.57 kg [0. oz] with fixed connection approx. 0.5 kg [8.34 oz] Protection housing side IP67 acc. to EN 6059 shaft side IP65, opt. IP67 Working temperature range -40 C... +80 C [-40 F... +76 F] Materials shaft / hollow shaft stainless steel flange aluminum housing zinc die-cast Shock resistance acc. to EN 60068--7 500 m/s, 6 ms Vibration resistance acc. to EN 60068--6 00 m/s, 55... 000 Hz Electrical characteristics Power supply 0... 30 V DC Power consumption (no load) max. 0 ma Reverse polarity protection yes of the power supply U approval file 468 CE compliant acc. to EMC guideline 04/30/EU RoHS guideline 0/65/EU SET button (zero or defined value, option) Protection against accidental activation. Button can only be operated with a ball-pen or pencil. Diagnostic ED (yellow) ED is ON with following errors Sensor error (Profibus error) Interface characteristics Resolution singleturn... 65536 (6 bit), scalable default: 89 (3 bit) Number of revolutions (multiturn)... 4096 ( bit), scalable Total resolution... 68.435.456 (8 bit), scalable default: 33.554.43 (5 bit) Code binary Interface Interface specification acc. to PROFIBUS-DP.0 / standard (DIN 945 part 3) / RS485 driver galvanically isolated Protocol Profibus encoder profile V. class and class with manufacturer-specific add-ons Baud rate max. Mbit/s Device address... 7 set by rotary switches Termination switchable set by DIP switches Profibus encoder profile V. The device profile describes the functionality of the communication and the user-specific component within the Profibus field bus system. For encoders, the encoder profile is definitive. Here the individual objects are defined independent of the manufacturer. Furthermore, the profiles offer space for additional manufacturer-specific functions; this means that Profibus-compliant device systems can be used now with the guarantee that they are ready for the future too. The following parameters can be programmed Direction of rotation. Scaling (number of steps per revolution). Preset value. Diagnostics mode. The following functionality is integrated Galvanic isolation of the bus stage with DC/DC converter. ine driver acc. to RS485 max. MB. Address programmable via DIP switches. Diagnostics ED. Full class and class functionality. Terminal assignment terminal box Interface Type of connection BUS IN BUS OUT 3 (terminal box) Interface Type of connection Function 3 x M connector 3 (3 x M connector) Signal: B A 0 V +V 0 V +V B A Terminal: 3 4 5 6 7 8 Signal: PB_A PB_B Shield Power supply Pin: 3 4 5 Signal: + 0 V Pin: 3 4 The shield of the connection cable must be connected over a large area via the cable gland. 5 3 4 3 4 ) For supplying an external Profibus DP termination resistor. Signal: BUS_VDC ) PB_A BUS_GND ) PB_B Shield Pin: 3 4 5 4 5 3
- 5 - Absolute encoders multiturn Dimensions shaft version, with removable bus terminal cover Dimensions in mm [inch] Synchro flange, ø 58 [.8] Flange type and 4 (drawing with cable) 4,5 [0,57] 5,5 [.03] 3 x M4, 6 [0.4] deep 50 [,97] 58 [,8] D 40 [,57] 60 [,36] D Fit 6 [0.4] h7 0 [0.39] 0 [0.39] f7 0 [0.79] /4 h7 7/8 3/8 h7 7/8 3 [0,] 3 [0,] 4 [0,6] 86 [3,39] 87, [3,43] 9 [0.75] 4 [,65] 3x 0 Clamping flange, ø 58 [.8] Flange type and 3 (drawing with 3 x M connector) 3 x M3, 6 [0.4] deep 57 [.4] 50 [.97] 3 x M4, 8 [0.3] deep 58 [.8] 53 [.] 36 [.4] D 40 [.57] 60 [.36] 48 [.89] 0 [0.39] 3 [0.] 3 [0.] 76 [3.0] 30 [.8] 4,5 0,57 0 3x0 D Fit 6 [0.4] h7 0 [0.39] 0 [0.39] f7 0 [0.79] /4 h7 7/8 3/8 h7 7/8 77, [3.03] Square flange, 63.5 [.5] Flange type 5 and 7 (drawing with cable) 57 [,4] 3,7 5 h7 [,5] D 40 [,57] 60 [,36] 7, [0,8] 7,5 [0,3] 78,5 [3,] 30 [,8] 4,5 [0,57] 5,5 [0,] 5,4 [,06] 63,5 [,5] 79,5 [3,3] D Fit 6 [0.4] h7 0 [0.39] 0 [0.39] f7 0 [0.79] /4 h7 7/8 3/8 h7 7/8
- 6 - Dimensions hollow shaft version (blind hollow shaft), with removable bus terminal cover Dimensions in mm [inch] Flange with spring element, long Flange type and (drawing with 3 x M connector) Slot spring element recommendation: cylindrical pin DIN 7, ø 4 [0.6] 3 x M3, 5.5 [0.] deep 3 Recommended torque for the clamping ring 0.6 Nm max. 3 [.] 34 4,5 [0.57] 40 [.58] 60 [.36] D H7 3x0,4 [0.09] 5,5 [.03] 4 [0.55] 3,99-0,0 [0.6] 36,7 [.44] 40,9 [.6] D Fit 0 [0.39] H7 30 [.8] [0.47] H7 30 [.8] 4 [0.55] H7 30 [.8] 5 [0.59] H7 30 [.8] 3/8 H7 30 [.8] / H7 30 [.8] 4 [0.6] 84, [3.3] 9,4 [3.6] 9 [0.75] 4 [.65] = insertion depth max. blind hollow shaft Flange with stator coupling, ø 63 [.48] Flange type 5 and 6 Pitch circle diameter for fixing screws 63 [.48] (drawing with cable) 4,5 0,57 57,3 Recommended torque for the clamping ring 0.6 Nm D Fit 0 [0.39] H7 30 [.8] [0.47] H7 30 [.8] 4 [0.55] H7 30 [.8] 5 [0.59] H7 30 [.8] 3/8 H7 30 [.8] / H7 30 [.8] = insertion depth max. blind hollow shaft 3, max. 0,8 0,03 4 0,6 84 3,3 9 3,63 9 0,75 40,57 60,36 68,68 63,48 D H7 3, 0, 5 0 0,79 Flange with stator coupling, ø 65 [.56] Flange type 3 and 4 Pitch circle diameter for fixing screws 65 [.56] (drawing with 3 x M connector) 57,4 Recommended torque for the clamping ring 0.6 Nm 4,5 [0.57] 3x0 4,3 [0.7] D Fit 0 [0.39] H7 30 [.8] [0.47] H7 30 [.8] 4 [0.55] H7 30 [.8] 5 [0.59] H7 30 [.8] 3/8 H7 30 [.8] / H7 30 [.8] = insertion depth max. blind hollow shaft max. 3 [.],5 [0.09] 94, [3.7] 95,5 [3.76] 9 [0.75] 40 [.57] 60 [.36] D H7 65 [.56] Subject to change without prior notice. WayCon Positionsmesstechnik GmbH email: info@waycon.de internet: www.waycon.biz Head Office Mehlbeerenstr. 4 804 Taufkirchen Tel. +49 (0)89 67 97 3-0 Fax +49 (0)89 67 97 3-50 Office Köln Auf der Pehle 503 Brühl Tel. +49 (0)3 56 79 44 Fax +49 (0)3 56 79 45