Information Document
|
|
- Patricia Harper
- 5 years ago
- Views:
Transcription
1 Information Document
2 SST Systems, Inc. produced this document for distribution to piping analysis software evaluators. Information contained herein is subject to change without prior notice. CAEPIPE and CAdvantagE are trademarks of SST Systems, Inc. OpenGL is a registered trademark of Silicon Graphics Inc. All other product names mentioned in this document are trademarks or registered trademarks of their respective companies/holders. CAEPIPE Information Document Version 7.30 Copyright May 2015, SST Systems, Inc. All Rights Reserved. Please direct inquiries to your local distributor or to SST Systems, Inc Technology Drive, Suite 236 San Jose, California Telephone: (408) Facsimile: (408) info@sstusa.com Page 2
3 CAEPIPE - Pipe Stress Analysis Software Rapidly Create & Analyze Piping Systems of Any Complexity with the Least Effort Why CAEPIPE Easy to (re) Learn, Cuts your time in half Acclaimed userinterface, Quick to Learn and Use Uniquely Quick Iterative Studies Most Cost-effective Realistic Graphical Visualization using industry-standard OpenGL Verified accuracy results 30+ Years! Mature, Robust and Comprehensive Easier Faster More Productive Design Better Piping, Faster Reduce Overall Costs Make Your Job Easier Become Twice as Productive Get DONE faster when you use CAEPIPE's carefully designed features for rapid modeling, powerful analyses with quick solution times, and easy results review. You will benefit from being able to quickly evaluate alternate design solutions ("what-if" scenarios). Avoid frustration when you work with the elegantly simple and intuitive user-interface to model or edit simple or complex piping systems. Save your money because first, CAEPIPE costs less and second, you will see dramatically increased productivity. CAEPIPE pays for itself faster than others do, if at all. CAEPIPE - the first pipe stress analysis software on the PC back in was an immediate success when it entered the energy, process and aerospace markets. Since that time, most of SST Systems' efforts have been directed towards aggressively providing CAEPIPE s large and loyal installed user base with enhancements and improvements that have made CAEPIPE comprehensive and robust. Now, in its latest generation, it allows you to perform complete static and dynamic analyses, check your design for compliance with required piping codes (ASME, B31, European, Canadian, Swedish and more) and with guidelines (WRC, NEMA, API), among many other things. Find out why more and more companies stuck with costly competing software (with costly capital costs, needlessly required training costs, that run in the thousands of dollars every year) are switching to CAEPIPE. Download a free uncrippled, fully-featured copy that you can learn to use in 20 minutes or less. (go to This document contains a non-comprehensive list of CAEPIPE s features. We suggest you print this document before reviewing it. Page 3
4 Modeling Capabilities Native 32-bit Windows application with an acclaimed user interface Multiple, independently resizable windows View Results, Graphics, Input and Details all at the same time Industry standard OpenGL graphics, capabilities include: Zoom, pan and rotate 3D Rendering Selective showing and plotting of various entities View from any direction (automatic iso and plan views) Color coded stress contour mapping Copy image from the graphics window to the clipboard Several graphics output formats - HPGL, DXF, EPS, EMF Plot of single line graphics to AutoCAD format Specify title for plot separate from model Print in color (Low/Medium/High Resolution, and Black/White background) No anisotropic graphical distortions upon window resizing Page 4
5 Easy model generation and powerful editing features Instantaneous error checking of input data Various element types Pipe Elbow/Bend (Flexibility factor, User SIF, Different material, Thickness, etc.) Miter bend (Flexibility factor, User SIF, Different material, Thickness, etc.) Jacketed pipe Jacketed bend Reducer Rigid element Valve Bellows Slip joint (with friction) Hinge joint (with friction and rotation limits) Ball joint (with friction and rotation limits) Beam (end releases, beta angle, shear deformation) Elastic element Page 5
6 Tie rod (with different stiffnesses and gaps in tension/compression) Cold spring (cut short or long) Various support types Rigid and flexible anchor Release anchors during hanger design Two-way rigid restraint Skewed restraint (translational or rotational) Guide (with gap, friction and stiffness) Hangers Variable spring support Constant support User defined Rod hanger Limit stop (with gap, friction and stiffness) Snubber (rigid or flexible) Generic Support Page 6
7 Supports can be connected to other nodes Other useful data Flange Force and moment Jacket end cap Spider Nozzles attached to cylindrical and spherical shells Weld Threaded joint Concentrated mass SIFs (tee, branch, and such) Built-in databases Pipe sizes (ISO, ANSI, JIS and DIN, including bend radius data) Insulation materials Over 30 spring hanger catalogs Flanges (weights, SIFs) Large Valve library (types, lengths, weights); User-definable too Material libraries for commonly used materials and codes (user-definable too) B31.1 and B31.3 Material libraries with over 400 materials Nozzle flexibilities according to WRC 297, API 650 and PD5500 SIF values for different components from each piping code AISC library of beam sections (user-definable too) Piping codes B31.1 B31.1 (1967) B31.3 B31.4 B31.5 B31.8 B31.9 ASME Section III, Class 2 (1980, 1986, 1992) European EN French RCC-M and CODETI Swedish Dutch Stoomwezen Norwegian British BS 806 Canadian Z183 Canadian Z184 Rotating equipment NEMA SM-23 (Turbines) API 610 (Vertical and Horizontal pumps) ANSI/HI (Rotodynamic pumps) API 617 (Compressors) Page 7
8 Internal and External Pressure Design of pipe and pipe fittings as per EN (2012) Flange stresses as per ASME Sec. VIII Div. 1 Calculation of allowable nozzle loads for nozzles to spherical and cylindrical shells as per European code EN Non-linearities Friction in Ball, Hinge and Slip joints Gaps and friction in Limit stops and Guides Rotation limits in Ball and Hinge joints, Tension/compression stiffnesses and gaps in Tie rods Nozzle stiffnesses WRC 297 API 650 PD 5500 Units in any combination SI Metric English Any combination of above List window Fully editable and printable Display/edit itemized listings of components/materials/sections/etc. with all details Many keyboard shortcuts for quick and efficient operation Node search feature Comments in the model (make as many comments anywhere) Page 8
9 Block and Edit operations Generate new piping from existing piping Change material, pipe size, and temperature and pressure in one click Changes immediately updated in all open windows Edit, split and combine elements Merge models interactively Copy and Paste single or multiple elements with supports Extensive Find and Replace command Powerful multiple UNDO and REDO command Finding and Editing of Comment texts Automatic backup and periodic saving of model data Default settings for ease of use When a bend is input, by default, the radius, radius type, thickness, material and flexibility factor from the previous bend are used. When a hanger is input, the defaults are set from the previous hanger. Conversion of a time function to a force spectrum Local coordinate system shown for most elements including a nozzle Automatic node number increment (can be turned off) Specify slope for an element Large model sizes (7,000 elements with node numbers up to 99,999) Redefining a model's vertical axis without affecting the layout Analysis Features Rotate sections of piping model Static linear/non-linear analysis Sustained Expansion Operating Occasional Hydrotest Cold Spring Automatic spring hanger design Over 32 hanger catalogs (US, European, Japanese and Indian manufacturers) Loads Weight and upto 10 pressure cases (i.e., up to 11 sustained cases) External forces and moments for up to 10 thermal cases + 1 max sustained case Hydrotest case Up to 10 thermal loads with 50+ thermal ranges (expansion) Up to 10 thermal displacements for anchors and nozzles (expansion) Up to 10 operating cases (combination of weight, pressure and temperature) Flange equivalent pressures for 10 operating cases Rotating equipment reports for 10 operating cases Up to 4 wind loads (occasional cases) Seismic anchor movements (occasional) Static seismic acceleration (occasional) Page 9
10 Force Spectrum load (occasional) Seismic response spectra (occasional) Harmonic loads, e.g., periodic excitation from equipment such as pumps (occasional) Time history loads, e.g., a fluid hammer (occasional) Non-repeated anchor movement: (settlement) Peak pressure for occasional loads 95+ load combinations Support Load Summary for 150+ load combinations Analysis options Thermal case = Operating Sustained (recommended) Solve Thermal case independently Modal analysis: Fast solver Includes Dynamic Susceptibility analysis Seismic response spectrum analysis Combination method: SRSS or Absolute sum or Closely spaced modes as per NRC Guide 1.92 Spectrum Types: Frequency (or period) versus displacement, velocity or acceleration. Linear or logarithmic interpolation, multiple units supported Spectrum entered interactively or through user created text file Missing mass correction for response spectrum analysis Time history analysis Force spectrum analysis Harmonic analysis FRP piping analysis (user-definable allowables for different directions) Buried piping analysis Results Review Output Displacements at All nodes Ball joints (with bending displacements) Flexible joints (Bellows, Slip, Hinge and Ball joints) Guides, Hangers, Limit stops Minimum and maximum displacements for each load case Page 10
11 Deflected shape (animation possible) Support loads for all load cases Support load summary (150+) Element forces and moments (local and global) Internal and External Pressure Design results as per EN (2012) Stresses Code compliance stresses Sorted code stresses Von Mises, Maximum and Minimum stresses Operating stresses for nondestructive examination (NDE) Page 11
12 Plotted stresses and stress ratios Hanger report Flange report Rotating equipment reports Frequencies and mode shapes (animation possible) Response spectrum analysis results Color coded stresses and stress ratios Center of gravity calculation Clean, Concise, Clearly Organized, Formatted and Customizable reports Overstressed nodes shown in reverse text Print preview for reports and graphics Bill of materials and Table of contents for reports Page 12
13 Related Features Neutral file input and output (.mbf) Compact and fast: Program size still approximately 2 MB! Widest Support for Importing / Exporting piping data Import data from plant design systems (optional) AVEVA s PDMS Intergraph s PDS and SmartPlant 3D Autodesk s AutoCAD Plant 3D CADMATIC Dassault Systemes CATIA Bentley s AutoPLANT AVEVA s Tribon (ship building) Other plant design software that produce piping layout in PCF format Import data from pipe stress analysis programs (built-in) Intergraph s CAESAR II Algor s PipePak Export to 2D DXF (built-in) Aveva s PDMS (built-in) CADMATIC (built-in) Piping Component File (PCF) format (built-in) Intergraph s CAESAR-II (optional) DST s PIPESTRESS (optional) Advanced 32-bit Windows technology Multithreading: Layout, Graphics, Animation and Analysis run in separate threads Robust Exception handling: Better error diagnostics Memory mapped files: Really fast data access Ability to change display and print fonts for text and graphics Long filename support (including spaces) Advanced software features Super fast dynamic scrollbar with tracking scroll box in real-time for text and graphics Dynamic updating of data in all open windows Layout, List and Graphics Synchronization of the highlight/cursor between all open text and graphics windows Simultaneous visual updates of deflected and mode shapes. Simply switch between different load cases (or mode shapes) to show corresponding deflected (or mode shape). Flashing cursor in graphics window synchronized at all times with the input window A pop-up context menu of frequently used commands in Graphics window Graphics scales dynamically in real-time. Simply resize the window for fast and dynamic resizing. SST continues to constantly enhance and improve CAEPIPE. Please check with us if you do not see a feature listed in this document. Tel: , info@sstusa.com Page 13
Information Document
Information Document SST Systems, Inc. produced this document for distribution to piping analysis software evaluators. Information contained herein is subject to change without prior notice. CAEPIPE and
More informationCOADE CAESAR II. Pipe Stress Analysis
COADE CAESAR II Pipe Stress Analysis CAESAR II: The World Standard for Pipe Stress Analysis Since its introduction in 1984, CAESAR II has become the world s most widely used pipe flexibility and stress
More informationcheckstress [for Intergraph's PDS]
checkstress [for Intergraph's PDS] Introduction Under the checkstress brand name, three products are available namely checkstress (which generates only CAEPIPE input file), checkstress II (which generates
More informationCAEPIPE. Tutorial for Modeling and Results Review Problem 1
CAEPIPE Tutorial for Modeling and Results Review Problem 1 CAEPIPE Tutorial, 2018, SST Systems, Inc. All Rights Reserved. Disclaimer Please read the following carefully: This software and this manual have
More informationLoad Case Definition in CAESAR II
Load Case Definition in CAESAR II The CAESAR II Load Case Editor is a very versatile instrument for combining native and combination loads in nearly any manner required by the various piping codes supported
More informationcheckstress User s Manual
TM checkstress User s Manual checkstress User s Manual, Server Version 9.xx, 2016, SST Systems, Inc. All rights reserved. Disclaimer Please read the following carefully: This software and this document
More informationAUTOPIPE / CAESAR TRANSLATION
AUTOPIPE / CAESAR TRANSLATION CONTENTS AutoPIPE / Caesar Translation... 1 Caesar Neutral File Versions... 2 Transfering Caesar Model to AutoPIPE... 3 Transfer Large Caesar Models... 9 AutoPIPE Configurable
More informationROHR2. Program System ROHR2 Interfaces - Overview and Details. SIGMA Ingenieurgesellschaft mbh
ROHR2 Program System ROHR2 Interfaces - Overview and Details ROHR2 Interfaces Feature List Content ROHR2 Introduction... 1 1 ROHR2 interfaces... 1 1.1 ROHR2 Interfaces overview... 2 1.2 Licenses and system
More informationTutorial. BOSfluids. Water hammer (part 3) Dynamic Analysis using Caesar II
BOSfluids Tutorial Water hammer (part 3) Dynamic Analysis using Caesar II The Water hammer tutorial is a 3 part tutorial describing the phenomena of water hammer in a piping system and how BOSfluids can
More informationROHR2 Interfaces. Program System ROHR2 Interfaces - Overview and Details. SIGMA Ingenieurgesellschaft mbh
Program System ROHR2 Interfaces - Overview and Details Contents 1 Integration of ROHR2... 1 2 Interfaces to CAD-Systems... 2 2.1 2D CAD-Systems - Overview... 2 2.2 Neutral Interface... 3 2.3 Interface
More informationPTC Creo Simulate. Features and Specifications. Data Sheet
PTC Creo Simulate PTC Creo Simulate gives designers and engineers the power to evaluate structural and thermal product performance on your digital model before resorting to costly, time-consuming physical
More informationPD2CAEPIPE - Plant Design-to-CAEPIPE Translator
PD2CAEPIPE - Plant Design-to-CAEPIPE Translator (for converting PCF files) 1.0 Installing Program To install PD2CAEPIPE on Windows NT, load the product CD supplied by InfoPlant and run the program "SETUP.EXE"
More informationRF-PIPING. Add-on Modules for PIPELINES. Program Description
Version February 2016 Programs RF-PIPING Add-on Modules for PIPELINES Program Description All rights, including those of translations, are reserved. No portion of this book may be reproduced mechanically,
More informationTutorial on Modeling of Expansion Joints using CAEPIPE
Tutorial on Modeling of Expansion Joints using CAEPIPE The following examples illustrate the modeling of various types of expansion joints in CAEPIPE stress models. Example 1: Tied Bellow (without gaps)
More informationVARIOUS APPROACHES USED IN THE SEISMIC QUALIFICATION OF THE PIPING SYSTEMS IN NUCLEAR FACILITIES. Introduction
VARIOUS APPROACHES USED IN THE SEISMIC QUALIFICATION OF THE PIPING SYSTEMS IN NUCLEAR FACILITIES A. Musil, P. Markov Stevenson&Associates, Pilsen, Czech Republic Introduction In the firm Stevenson&Associates
More informationGeneric Neutral Files
Chapter 8 Interfaces 8-57 Generic Neutral Files CAESAR II Neutral File Interface The general neutral file can be used to send data either in to or out of the standard CAESAR II binary input file, otherwise
More informationNEi FEA. IRONCAD Advanced FEA. IRONCAD Advanced FEA. NEi FEA
2011 Overview has been designed as a universal, adaptive and user-friendly graphical user interface for geometrical modeling, data input and visualization of results for all types of numerical simulation
More informationTutorial 1: Welded Frame - Problem Description
Tutorial 1: Welded Frame - Problem Description Introduction In this first tutorial, we will analyse a simple frame: firstly as a welded frame, and secondly as a pin jointed truss. In each case, we will
More informationBackground CE 342. Why RISA-2D? Availability
Background CE 342 RISA-2D RISA-2D is a structural analysis program, which can model: Beams, frames, trusses and plates. Any linear elastic structural material. Typical supports, such as pins, rollers and
More informationAUTOPIPE NOZZLE. LOCAL STRESS ANALYSIS V8i Release Tutorial with Examples
AUTOPIPE NOZZLE LOCAL STRESS ANALYSIS V8i Release 8.11 Tutorial with Examples 1 Table of Contents List of Examples... 2 Example 1: The basic operating procedures of AutoPIPE Nozzle... 3 Starting AutoPIPE
More informationMultiframe Windows Version 16. User Manual
Multiframe Windows Version 16 User Manual Bentley Systems, Incorporated 2013 License & Copyright Multiframe Program & User Manual 2013 Bentley Systems, Incorporated iii Table of Contents License & Copyright...
More informationTutorial for Response Spectrum Analysis using CAEPIPE
Tutorial for Response Spectrum Analysis using CAEPIPE The following are the Steps for performing the Response Spectrum Analysis using CAEPIPE. General The Response Spectrum is a plot of the maximum response
More informationSimulation of AJWSP10033_FOLDED _ST_FR
Phone: 01922 453038 www.hyperon-simulation-and-cad-services.co.uk Simulation of AJWSP10033_FOLDED _ST_FR Date: 06 May 2017 Designer: Study name: AJWSP10033_FOLDED_STATIC Analysis type: Static Description
More informationTRIFLEX Windows Enhancements & Modifications 16 February 2002
Enhancements 1. Euro Code - In TRIFLEX Windows Release 1.6.0, the requirements of the new Euro Piping Code have been incorporated. The User will now be able to quickly check compliance with the new Euro
More informationDEMO OF SMART STRESS ISO (SSI)
DEMO OF SMART STRESS ISO (SSI) The information flow in the complete Life Cycle Solution is the following: PDS PDMS AutoPlant Piping Specs I-EXPORT IDF/PCF I-CONVERT I-SKETCH (ISOGEN) PIPENET Standard PIPENET
More informationThe CAESAR II Piping Model. How Good Is It?
The CAESAR II Piping Model How Good Is It? Quick Agenda Introduction The digital model What s missing in our CAESAR II model? Model precision and construction tolerances Engineering Sensitivity Boundary
More informationSOLIDWORKS SIMULATION
SOLIDWORKS SIMULATION Innovation is about taking chances, not taking risks Scootchi by Curventa Designworks LTD What if? is the question that fuels innovation. SolidWorks Simulation software takes the
More informationCE Advanced Structural Analysis. Lab 4 SAP2000 Plane Elasticity
Department of Civil & Geological Engineering COLLEGE OF ENGINEERING CE 463.3 Advanced Structural Analysis Lab 4 SAP2000 Plane Elasticity February 27 th, 2013 T.A: Ouafi Saha Professor: M. Boulfiza 1. Rectangular
More informationPiping Design. Site Map Preface Getting Started Basic Tasks Advanced Tasks Customizing Workbench Description Index
Piping Design Site Map Preface Getting Started Basic Tasks Advanced Tasks Customizing Workbench Description Index Dassault Systèmes 1994-2001. All rights reserved. Site Map Piping Design member member
More informationCREO ENGINEER PACKAGES. 3D CAD solutions optimized for your product development tasks
CREO ENGINEER PACKAGES 3D CAD solutions optimized for your product development tasks From the smallest product design firm to the largest, manufacturing organizations are under constant pressure to develop
More informationSAP2000 Version Release Notes
SAP2000 Version 21.0.0 Release Notes Copyright Computers and Structures, Inc., 2018 Notice Date: 2018-12-20 This file lists all changes made to SAP2000 since the previous version. Most changes do not affect
More informationRelease 4.0 June 2018
SINETZ Program System for Steady State Calculation of Flow Distribution, Pressure Drop and Heat Loss in Branched and Intermeshed Piping Networks Includes SINETZfluid SINETZ Introduction - Editing a System
More informationCSiBridge 2014 (Version ) Release Notes
CSiBridge 2014 (Version 16.0.1) Release Notes Copyright Computers and Structures, Inc., 2013 Notice Date: 2013-09-27 This file lists all changes made to CSiBridge since the previous version. Most changes
More informationTutorial. BOSfluids. Water hammer (part 1) Modeling
BOSfluids Tutorial Water hammer (part 1) Modeling The Water hammer tutorial is a 3 part tutorial describing the phenomena of water hammer in a piping system and how BOSfluids can be used to examine the
More informationMechanical Design CATIA - Structure Design 1 (SR1) CATIA V5R20
Mechanical Design CATIA - Structure Design 1 (SR1) CATIA V5R20 Mechanical Design CATIA - Structure Design Rapidly design structures using catalogues of standard or custom sections Product overview CATIA
More informationGenerative Part Structural Analysis Expert
CATIA V5 Training Foils Generative Part Structural Analysis Expert Version 5 Release 19 September 2008 EDU_CAT_EN_GPE_FI_V5R19 About this course Objectives of the course Upon completion of this course
More informationORBIS MODERN ROLLING-ELEMENT BEARING ANALYSIS SOFTWARE
ORBIS MODERN ROLLING-ELEMENT BEARING ANALYSIS SOFTWARE OVERVIEW Introduction ORBIS is a computer program to solve the nonlinear elastic behavior of rollingelement ball bearings. The model considers each
More informationPV Elite 2011 version Quick Start Page 1-21
PV Elite 2011 version Quick Start Page 1-21 INTRODUCTION The 2009 version of PV Elite introduces an updated user interface. The interface is the area on the screen where you, the user enter all the information
More informationSimWise 4D. Integrated Motion and Stress Analysis
SimWise 4D Integrated Motion and Stress Analysis SimWise 4D Integrated Motion Simulation and Stress Analysis SimWise 4D is a software tool that allows the functional performance of mechanical parts and
More informationAdvance Design. Tutorial
TUTORIAL 2018 Advance Design Tutorial Table of Contents About this tutorial... 1 How to use this guide... 3 Lesson 1: Preparing and organizing your model... 4 Step 1: Start Advance Design... 5 Step 2:
More informationPTC CREO PARAMETRIC ESSENTIALS PACKAGES. Powerful 3D CAD solutions optimized for your product development tasks. Essentials Packages
PTC CREO PARAMETRIC ESSENTIALS PACKAGES Powerful 3D CAD solutions optimized for your product development tasks Product design firms and manufacturing companies are under constant pressure to develop more
More informationSAFI Sample Projects. Design of a Steel Structure. SAFI Quality Software Inc. 3393, chemin Sainte-Foy Ste-Foy, Quebec, G1X 1S7 Canada
SAFI Sample Projects Design of a Steel Structure SAFI Quality Software Inc. 3393, chemin Sainte-Foy Ste-Foy, Quebec, G1X 1S7 Canada Contact: Rachik Elmaraghy, P.Eng., M.A.Sc. Tel.: 1-418-654-9454 1-800-810-9454
More information2: Static analysis of a plate
2: Static analysis of a plate Topics covered Project description Using SolidWorks Simulation interface Linear static analysis with solid elements Finding reaction forces Controlling discretization errors
More informationMultiframe August 2007
Multiframe 10.03 09 August 2007 Windows Release Note This release note describes the Windows version 10.03 of Multiframe, Steel Designer and Section Maker. This release will run on Windows 2000/XP/2003/Vista.
More informationSolidWorks. An Overview of SolidWorks and Its Associated Analysis Programs
An Overview of SolidWorks and Its Associated Analysis Programs prepared by Prof. D. Xue University of Calgary SolidWorks - a solid modeling CAD tool. COSMOSWorks - a design analysis system fully integrated
More informationSIMULATION CAPABILITIES IN CREO
SIMULATION CAPABILITIES IN CREO Enhance Your Product Design with Simulation & Using digital prototypes to understand how your designs perform in real-world conditions is vital to your product development
More informationIntroduction to Engineering Analysis
Chapter 1 Introduction to Engineering Analysis This chapter introduces you to the Stress Analysis and Dynamic Simulation environments. You learn how digital prototyping can be used to simulate your designs
More informationASME Fatigue DOCUMENTATION. ANSYS Mechanical Application. Extension version Compatible ANSYS version
ASME Fatigue ANSYS Mechanical Application DOCUMENTATION Extension version 180.1 Release date 06-Apr-17 Compatible ANSYS version 18.0 www.edrmedeso.com Table of Contents 1 INTRODUCTION... 3 2 PRODUCT RESTRICTIONS...
More informationDMU Engineering Analysis Review
DMU Engineering Analysis Review Overview Conventions What's New? Getting Started Entering DMU Engineering Analysis Review Workbench Generating an Image Visualizing Extrema Generating a Basic Analysis Report
More information17. SEISMIC ANALYSIS MODELING TO SATISFY BUILDING CODES
17. SEISMIC ANALYSIS MODELING TO SATISFY BUILDING CODES The Current Building Codes Use the Terminology: Principal Direction without a Unique Definition 17.1 INTRODUCTION { XE "Building Codes" }Currently
More informationsolidthinking Design Release Notes
solidthinking Design 2017.2 Release Notes The solidthinking Design package includes Inspire and Evolve 2017.2. Inspire is available on Windows, while Evolve is available on Windows and Mac. solidthinking
More informationWP1 NUMERICAL BENCHMARK INVESTIGATION
WP1 NUMERICAL BENCHMARK INVESTIGATION 1 Table of contents 1 Introduction... 3 2 1 st example: beam under pure bending... 3 2.1 Definition of load application and boundary conditions... 4 2.2 Definition
More informationSimLab 14.3 Release Notes
SimLab 14.3 Release Notes Highlights SimLab 14.0 introduced new graphical user interface and since then this has evolved continuously in subsequent versions. In addition, many new core features have been
More informationChapter 5 Modeling and Simulation of Mechanism
Chapter 5 Modeling and Simulation of Mechanism In the present study, KED analysis of four bar planar mechanism using MATLAB program and ANSYS software has been carried out. The analysis has also been carried
More informationFEMAP FEMAP Modeler. Meshing: Subdivision and semi-automatic meshing of solids Automatic and mapped meshing (with quads or bricks), including biasing
FEMAP FEMAP Modeler Overview FEMAP V9.3 is a Windows-native pre- and post-processor used by engineering organizations world wide to model various products, processes, and systems. Its graphical user interface
More informationSolid design. Reliable pipelines. Simulation results can be viewed and printed in different formats in tables, graphs and in 3D illustrations.
Bringing added value to pipeline engineers worldwide SAGE Profile has been specifically designed to assist pipeline engineers in the design, installation and analysis of offshore pipelines. The powerful
More informationSIMULATION CAPABILITIES IN CREO. Enhance Your Product Design with Simulation & Analysis
SIMULATION CAPABILITIES IN CREO Enhance Your Product Design with Simulation & Using digital prototypes to understand how your designs perform in real-world conditions is vital to your product development
More informationANSYS Element. elearning. Peter Barrett October CAE Associates Inc. and ANSYS Inc. All rights reserved.
ANSYS Element Selection elearning Peter Barrett October 2012 2012 CAE Associates Inc. and ANSYS Inc. All rights reserved. ANSYS Element Selection What is the best element type(s) for my analysis? Best
More informationUniversal Installation Instructions for SSTLM Software
Universal Installation Instructions for SSTLM Software Thank you for downloading software from sstusa.com. Please carefully review and follow all instructions. IMPORTANT NOTE: SST software mentioned in
More informationTutorial on Qualification of Nozzles attached to Spherical/Cylindrical Vessels using CAEPIPE
Tutorial on Qualification of Nozzles attached to Spherical/Cylindrical Vessels using CAEPIPE The following are the steps for qualifying nozzles welded to Spherical/Cylindrical Vessels such as pressure
More informationCOADE. CADWorx. Plant Design Suite
COADE CADWorx Plant Design Suite CADWorx: The most complete plant design suite for the AutoCAD platform! CADWorx is COADE s integrated series of AutoCAD -based tools for plant design that provides intelligent
More informationCOADE. CADWorx. Plant Design Suite
COADE CADWorx Plant Design Suite CADWorx: The most complete plant design suite for the AutoCAD platform! CADWorx is COADE s integrated series of AutoCAD -based tools for plant design that provides intelligent
More informationPV Elite. System Requirements. Version: 2018 ( ) Date: 27 November 2017
PV Elite Product: PV Elite (PVE) Version: 2018 (20.00.00.0000) Date: 27 November 2017 Description: Sections: Intergraph PV Elite analyzes and design pressure vessels and heat exchangers in accordance with
More informationGEAR DESIGN SOLUTIONS
GEAR DESIGN SOLUTIONS Release 5.0 2012 Dontyne_Brochure2012.indd 2 28/08/2012 09:59 Dontyne SyStems Dontyne Systems offers software and services aimed at the optimum production of gear components and their
More informationME 442. Marc/Mentat-2011 Tutorial-1
ME 442 Overview Marc/Mentat-2011 Tutorial-1 The purpose of this tutorial is to introduce the new user to the MSC/MARC/MENTAT finite element program. It should take about one hour to complete. The MARC/MENTAT
More informationSimWise. 3D Dynamic Motion, and Stress Analysis. integrated with Alibre Design
SimWise 3D Dynamic Motion, and Stress Analysis integrated with Alibre Design SimWise 4D for Alibre Integrated Motion Simulation and Stress Analysis SimWise 4D is a software tool that allows the functional
More informationComplete and robust mechanical simulation solution. imaginit.com/simulation-mechanical
Complete and robust mechanical simulation solution A mechanical simulation solution for finite element analysis powered by the Autodesk Nastran solver Accurately predict product behavior, optimize and
More informationGetting Started. Introduction to the Basics. Cadpipe Control Center
Getting Started Introduction to the Basics Cadpipe Control Center The Cadpipe Control Center provides a central location to organize your projects, settings and drawings. For existing Industrial users,
More informationTRINITAS. a Finite Element stand-alone tool for Conceptual design, Optimization and General finite element analysis. Introductional Manual
TRINITAS a Finite Element stand-alone tool for Conceptual design, Optimization and General finite element analysis Introductional Manual Bo Torstenfelt Contents 1 Introduction 1 2 Starting the Program
More informationmidas Civil Advanced Webinar Date: February 9th, 2012 Topic: General Use of midas Civil Presenter: Abhishek Das Bridging Your Innovations to Realities
Advanced Webinar Date: February 9th, 2012 Topic: General Use of midas Civil Presenter: Abhishek Das Contents: Overview Modeling Boundary Conditions Loading Analysis Results Design and Misc. Introduction
More informationGASWorkS Product Description
GASWorkS v10 Description: 1 GASWorkS Product Description GASWorkS has continued to evolve since our first quite simple but effective version of the software was released in 1991. Our latest release sports
More informationNX Advanced FEM. fact sheet
Advanced FEM fact sheet www.ugs.com Summary Advanced FEM is a comprehensive multi-cad finite element modeling and results visualization product that is designed to meet the needs of experienced CAE analysts.
More informationRevised Sheet Metal Simulation, J.E. Akin, Rice University
Revised Sheet Metal Simulation, J.E. Akin, Rice University A SolidWorks simulation tutorial is just intended to illustrate where to find various icons that you would need in a real engineering analysis.
More informationFEA BENDING, TORSION, TENSION, and SHEAR TUTORIAL in CATIA
1 FEA BENDING, TORSION, TENSION, and SHEAR TUTORIAL in CATIA This tutorial shows the basics of a solid bending, torsional, tension, and shear FEA (Finite Elemental Analysis) model in CATIA. Torsion - page
More informationModel Library Mechanics
Model Library Mechanics Using the libraries Mechanics 1D (Linear), Mechanics 1D (Rotary), Modal System incl. ANSYS interface, and MBS Mechanics (3D) incl. CAD import via STL and the additional options
More informationDesign smarter with powerful, easy-to-use 3D CAD solutions
Creo Parametric Essentials Packages Design smarter with powerful, easy-to-use 3D CAD solutions PTC s 3D CAD product design solution, Creo Parametric, gives you the right tools to achieve the highest quality
More informationWhat s new in Femap 9.3
What s new in Femap 9.3 fact sheet www.ugs.com/femap Summary Femap version 9.3 is the latest release of UGS robust pre and post processor for engineering finite element analysis (FEA). Femap software is
More informationTABLE OF CONTENTS WHAT IS ADVANCE DESIGN? INSTALLING ADVANCE DESIGN... 8 System requirements... 8 Advance Design installation...
Starting Guide 2019 TABLE OF CONTENTS INTRODUCTION... 5 Welcome to Advance Design... 5 About this guide... 6 Where to find information?... 6 Contacting technical support... 6 WHAT IS ADVANCE DESIGN?...
More informationSimulation of RF HEat Test
Simulation of RF HEat Test Date: Tuesday, December 22, 2015 Designer: Solidworks Study name: Stress One Third Emissivity Analysis type: Nonlinear - Dynamic Description No Data Table of Contents Description...
More informationGETTING STARTED COMPUTERS & STRUCTURES INC.
SAP2000 Linear and Nonlinear Static and Dynamic Analysis and Design of Three-Dimensional Structures GETTING STARTED COMPUTERS & STRUCTURES INC. Computers and Structures, Inc. Berkeley, California, USA
More informationUsing MSC.Nastran for Explicit FEM Simulations
3. LS-DYNA Anwenderforum, Bamberg 2004 CAE / IT III Using MSC.Nastran for Explicit FEM Simulations Patrick Doelfs, Dr. Ingo Neubauer MSC.Software GmbH, D-81829 München, Patrick.Doelfs@mscsoftware.com Abstract:
More informationPTC Creo Piping and Cabling Extension
PTC Creo Piping and Cabling Extension Accelerate your Piping and Cabling Design Process Traditional mechanical products are becoming more and more complex due to their increased reliance on electrical
More informationFEMAP All Rights Reserved NASTRAN 1
FEMAP 1 Overview Femap V10.3 is a Windows-native pre- and postprocessor used by engineering organizations world wide to model various products, processes, and systems. Its graphical user interface provides
More informationGlobal to Local Model Interface for Deepwater Top Tension Risers
Global to Local Model Interface for Deepwater Top Tension Risers Mateusz Podskarbi Karan Kakar 2H Offshore Inc, Houston, TX Abstract The water depths from which oil and gas are being produced are reaching
More informationSpaceClaim Professional The Natural 3D Design System. Advanced Technology
SpaceClaim Professional The Natural 3D Design System SpaceClaim Professional is the 3D productivity tool for engineers who contribute to the design and manufacture of mechanical products across a broad
More informationMULTIFRAME & VISUAL ANALYSIS
By Jacques Cattan MSC SOFTWARE REVIEW: MULTIFRAME & VISUAL ANALYSIS In the January issue of Modern Steel Construction, I reviewed six structural analysis software packages; this month I m reviewing two
More informationNovember c Fluent Inc. November 8,
MIXSIM 2.1 Tutorial November 2006 c Fluent Inc. November 8, 2006 1 Copyright c 2006 by Fluent Inc. All Rights Reserved. No part of this document may be reproduced or otherwise used in any form without
More informationVibration Analysis with SOLIDWORKS Simulation and SOLIDWORKS. Before you start 7
i Table of contents Before you start 7 Notes on hands-on exercises and functionality of Simulation Prerequisites Selected terminology 1: Introduction to vibration analysis 10 Differences between a mechanism
More informationValidation Report: Additional Data Mapping to Structural Analysis Packages
Autodesk Moldflow Structural Alliance 2012 Validation Report: Additional Data Mapping to Structural Analysis Packages Mapping process-induced stress data from Autodesk Moldflow Insight Dual Domain and
More informationExample 24 Spring-back
Example 24 Spring-back Summary The spring-back simulation of sheet metal bent into a hat-shape is studied. The problem is one of the famous tests from the Numisheet 93. As spring-back is generally a quasi-static
More informationMetraloop expansion joints for seismic applications
Search METRALOOP EXPANSION JOINTS Metraloop expansion joints for seismic applications A safe, cost-effective seismic expansion joint. Piping used in applications and locations subject to seismic conditions
More informationCOMOS. Process P&ID Operation. Third-party software 1. Overview of the P&ID module 2. Preparations 3. Overview of P&ID objects 4.
Third-party software 1 Overview of the P&ID module 2 COMOS Process Operating Manual Preparations 3 Overview of P&ID objects 4 Create P&ID 5 Using components 6 Using pipes 7 Connecting objects 8 Data flow
More informationENGINEERING MEASUREMENTS ENTERPRISE LTD. TECHNICAL REPORT RESULTS OF DEVIATION MEASUREMENTS AND GEOMETRY OF ROTARY KILN GEOCEMENT PLANT
GEOSERVEX s.c. Zbigniew i Boleslaw Krystowczyk e-mail: office@geoservex.com.pl http://www.geoservex.com.pl office: ul. Kościuszki /19A 8-9 Bydgoszcz, POLAND tel: (+48) 34 6 fax: (+48) 34 6 EU VAT ID No:
More informationTekla Structures Analysis Guide. Product version 21.0 March Tekla Corporation
Tekla Structures Analysis Guide Product version 21.0 March 2015 2015 Tekla Corporation Contents 1 Getting started with analysis... 7 1.1 What is an analysis model... 7 Analysis model objects...9 1.2 About
More informationCoupled Analysis of FSI
Coupled Analysis of FSI Qin Yin Fan Oct. 11, 2008 Important Key Words Fluid Structure Interface = FSI Computational Fluid Dynamics = CFD Pressure Displacement Analysis = PDA Thermal Stress Analysis = TSA
More informationMultiframe June 2003 Release Note
Multiframe 8.53 18 June 2003 Release Note This release note describes the Windows version 8.53 of Multiframe, Steel Designer and Section Maker. This release contains numerous enhancements to this range
More informationSimLab 14.2 Release Notes
SimLab 14.2 Release Notes Highlights SimLab 14.2 comes with various changes that improve performance and graphics rendering. In addition to java scripting, python scripting is introduced. The enhancements,
More informationChapter 2. Structural Tutorial
Chapter 2. Structural Tutorial Tutorials> Chapter 2. Structural Tutorial Static Analysis of a Corner Bracket Problem Specification Problem Description Build Geometry Define Materials Generate Mesh Apply
More informationSAP2000 FEATURES & A TO Z PROBLEMS. Collected by: MSc. NGUYEN LAN BRIDGE AND TUNNEL DIVISION DA NANG UNIVERSITY
SAP2000 FEATURES & A TO Z PROBLEMS Collected by: MSc. NGUYEN LAN BRIDGE AND TUNNEL DIVISION DA NANG UNIVERSITY INTERNAL CIRCULATION, 2007 SAP2000 FEATURES INTEGRATED SOFTWARE FOR STRUCTURAL ANALYSIS &
More informationLesson 6: Assembly Structural Analysis
Lesson 6: Assembly Structural Analysis In this lesson you will learn different approaches to analyze the assembly using assembly analysis connection properties between assembly components. In addition
More information