ISO ed2 Overview and Status September, Keith A. Hunten, P.E. Lockheed Martin Aeronautics Co. Advanced Development Programs
|
|
- Spencer Young
- 5 years ago
- Views:
Transcription
1 ISO ed2 Overview and Status September, 2013 Keith A. Hunten, P.E. Lockheed Martin Aeronautics Co. Advanced Development Programs
2 AP 209 ed2 Status The first edition of AP209 has been modularized and new capabilities added Built upon the full capabilities of AP203 ed2, now AP242 In addition to the AP209 ed1 classical finite element analysis, a STEP adaptation of CGNS computational fluid dynamics capability has been added that was built upon a new generic mesh based engineering analysis framework A discrete and continuous field representation based upon DT-NURBS capability was integrated with all types of analytical models The 19 new modules have been balloted and approved The AP209 ed2 DIS document is available Currently out for a Draft International Standard (DIS) ballot set to close in October 2013
3 AP 209 ed2 Modular Overview Product Identification Core Activity and Work Management Product Structure Analysis Identification Rules and Requirement Product Concept, Configuration & Effectivity Analysis Model Management Resource Information Product characteristic Fields and Properties Document Management Analysis Shape Geometric Shape Geometric Shape Related Analysis Control and Results AP242 Modules Presentation
4 (AP209) ed2: Multidisciplinary Analysis and Design Analysis Discipline Product Definitions Finite Element Analysis (FEA) Computational Fluid Dynamics (CFD) Generic Structured/ Unstructured Mesh and Mesh-less Numerical Analyses Kinematic Analyses Discrete and Continuous Scalar, Vector and Tensor Fields (properties, loads, results) Analysis Reports AP242-Based Design Discipline Product Definitions Part, product, document identification and management (PLM) Activity/Work Management Product Structure (Assemblies) GD&T/PMI Information Presentation/Draughting 3D/2D Shape Representations AP242 Commonality Advanced B-Representation Faceted B-Representation Manifold Surfaces With Topology Wireframe & Surface without Topology Wireframe Geometry with Topology Tessellated Shape Representation Composite Constituent Shape Representations CFD & Panel Aero CAD FEA Information Associatively Shared Between Analysis & Design Part Definitions 3D Shape Representations Composite Constituents Material Specifications & Properties Composite Constituents Ply Boundaries, Surfaces and Volumes Laminate Stacking Tables Composite Assemblies Reinforcement Orientations Material Specifications & Properties Composites Homogeneous (metallic)
5 CAD to Mesh/CAE Shape Management CAD (DMU) Idealisation/Cleaning to MESH creation and analysis AP 209 ed2 supports the idealised CAD Geometry when the CAD model has been updated/modified AP209 manages both a design and analysis product structure so versioning in each is supported, along with relationships between the analysis and design versions AP209 ed2 can represent a nominal design shape, an idealized analysis shape(s), and analysis shape(s) Part Allows Analysis to Revise Independently of Design Analysis Part Version Assembly Design Discipline Product Definition Analysis Design Version Relationship Analysis Version Analysis Discipline Product Definition Nominal Design Shape Idealized Analysis Shape Analysis Model Shape
6 Multi-Physics Coupling in AP209 ed2 Computer Aided Design Solid Models External Lofts Composite shape and structure Vehicle Loft with Structural Layout Finite Element Model Simulation Data Management Maneuver Loads Structural Finite Element Model & results Physical test strain and deflection results Fluid Dynamics Panel Methods CFD Wind tunnel data Interdisciplinary Communication Open Standards Memory/Stream/File based communication Panel Aerodynamic Model
7 What are the Links to Other Standards? AP233 (SE), AP239 (PLCS) Only the product structure core modules in AP209 ed2 are common between AP233, AP239 AP242 (Managed Model Based 3D Engineering) All of AP242 is a subset of AP209 ed2 AP237 (Fluid dynamics) The entire contents of AP237 have been subsumed in AP209 ed2
8 Development and Review Involvement The participants in the development of AP209 ed2 over the last 12 years include: MSC.Software, EPM Technologies, LKSoft, eurostep, Theorem, CAESAR Systems Lockheed Martin Aeronautics, Boeing (Commercial, Military, and Computer Systems), Northrop Grumman, BAE Systems, Volvo Aero (EAR model), JPL, NASA, ESA, AIAA/NASA CGNS The EU GEM (Generic Engineering Analysis Model) project Many other members of ISO TC194/SC4/WG3/T9 Engineering Analysis The Composites structure and shape capabilities shared with AP203 ed2 and AP242 have been extensively reviewed, implemented and piloted in the LOTAR program LM Aero, BAE Systems, EADS, Airbus, Boeing Vistagy/FIberSim (in CATIA, Unigraphics, and Pro/E) and Dassault Systemes CATIA are implementing it
Structural Analysis Interoperability based on ISO STEP AP209: Scope and status of implementation
Structural Analysis Interoperability based on ISO STEP AP209: Scope and status of implementation AFNeT Standardization Days Paris, 19 th April 2017 Presented by Albert Lévy (CIMPA, on behalf of Airbus)
More informationAFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse. Presentation by DASSAULT SYSTEMES
AFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse Presentation by DASSAULT SYSTEMES CAD functional capabilities supported by the STEP AP242 interface 3DEXPERIENCE 3D geometry 3D Product
More informationAFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse
AFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse Christian Caillet Datakit c.caillet@datakit.com Presentation : Datakit - CrossCADWare Content Product : Datakit CrossCADWare suite - CrossCADWare
More informationOptimized Composite Design Methodologies that Enable Rapid Change
Optimized Composite Design Methodologies that Enable Rapid Change Realize innovation. Agenda Multi Ply Introduction Application Rapid Change Acquired by Siemens PLM Software 2011 Leading composite design
More informationAFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse
AFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse Presentation by Trevor Leeson Theorem Solutions Date 09/10/2018, Theorem Solutions CAD functional capabilities supported by the STEP AP242
More informationAFNeT STEP AP242 Benchmark
e AFNeT STEP AP242 Benchmark Test report for the STEP AP242 Benchmark #1 Short Report September 2015 Preamble AFNeT mission is to promote the use of digital technologies in the extended enterprise. The
More informationThe Role of Geometry in the Multidisciplinary Design of Aerospace Vehicles
The Role of Geometry in the Multidisciplinary Design of Aerospace Vehicles SIAM Conference on Geometric Design Thomas A. Zang & Jamshid A. Samareh Multidisciplinary Optimization Branch NASA Langley Research
More informationCAx-IF Recommended Practices
for Status: Released Contacts: Jochen Boy ProSTEP ivip Association Dolivostraße 11 64293 Darmstadt / Germany jochen.boy@prostep.com CAx-IF Phil Rosché SCRA / PDES, Inc. 5300 International Blvd. North Charleston,
More informationImplementor Forums : CAx-IF and CAE-IF to accelerate interoperability solutions availability
Implementor Forums : CAx-IF and CAE-IF to accelerate interoperability solutions availability By Jean-Marc CREPEL, Associated CAE Expert, AFNeT April 19 & 20, AFNeT Standardization Days - Paris 1 The LOTAR
More informationME 345: Modeling & Simulation. Introduction to Finite Element Method
ME 345: Modeling & Simulation Introduction to Finite Element Method Examples Aircraft 2D plate Crashworthiness 2 Human Heart Gears Structure Human Spine 3 F.T. Fisher, PhD Dissertation, 2002 Fluid Flow
More informationSupporting Simulations to Guide Engineering Design
Supporting Simulations to Guide Engineering Design Mark S. Shephard Scientific Computation Research Center, Rensselaer Polytechnic Institute, Troy, NY 12810 Mark W. Beall, Bruce E. Webster Simmetrix, Inc.,
More informationAn Advanced Extensible Parametric Geometry Engine for Multi-Fidelity and Multi-Physics Analysis in Conceptual Design
An Advanced Extensible Parametric Geometry Engine for Multi-Fidelity and Multi-Physics Analysis in Conceptual Design Rob McDonald & David Marshall Cal Poly Andy Ko. JR Gloudemans NASA Glenn July 23, 2012
More informationME 475 FEA of a Composite Panel
ME 475 FEA of a Composite Panel Objectives: To determine the deflection and stress state of a composite panel subjected to asymmetric loading. Introduction: Composite laminates are composed of thin layers
More informationReducing overdesign with predictive performance and producibility simulation
American Society of Composites 29 th technical Conf., 16 th US-Japan Conf. on Composite Materials, San Diego, USA, September 10, 2014 Reducing overdesign with predictive performance and producibility simulation
More informationMorphing high lift structures: Smart leading edge device and smart single slotted flap Hans Peter Monner, Johannes Riemenschneider Madrid, 30 th
Morphing high lift structures: Smart leading edge device and smart single slotted flap Hans Peter Monner, Johannes Riemenschneider Madrid, 30 th March 2011 Outline Background Project overview Selected
More informationAFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse , G. Wahu
AFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse 16.10.2018, G. Wahu ABOUT CORETECHNOLOGIE CT is the leading supplier of CAD interoperability software solutions n More than 15 years of
More informationCAD - How Computer Can Aid Design?
CAD - How Computer Can Aid Design? Automating Drawing Generation Creating an Accurate 3D Model to Better Represent the Design and Allowing Easy Design Improvements Evaluating How Good is the Design and
More informationTraining Course Content
Pioneering engineering software systems, support & services. Training Course Content 29800 Middlebelt Road Suite 100 Farmington Hills, MI 48334 United States of America Tel: +1 248 737 9760 Fax: +1 248
More informationGeometric Modeling Lecture Series. Prof. G. Wang Department of Mechanical and Industrial Engineering University of Manitoba
Geometric Modeling 25.353 Lecture Series Prof. G. Wang Department of Mechanical and Industrial Engineering University of Manitoba Introduction Geometric modeling is as important to CAD as governing equilibrium
More informationCreating Mold Bases with NX Expressions
Creating Mold Bases with NX Expressions By Murat Ugur, April 29, 2013 In this article, I introduce Siemens PLM Systems NX expressions, part families, and the visual parameter editor. I show how to create
More informationInteraction of design and analysis, integration of CAD and FEA U. Rabien & R. Bronsart Germanischer Lloyd, Vorsetzen 32, Hamburg, Germany
Interaction of design and analysis, integration of CAD and FEA U. Rabien & R. Bronsart Germanischer Lloyd, Vorsetzen 32, 20459 Hamburg, Germany ABSTRACT This paper describes an implemented strategy for
More informationSimcenter 3D Engineering Desktop
Simcenter 3D Engineering Desktop Integrating geometry and FE modeling to streamline the product development process Benefits Speed simulation processes by up to 70 percent Increase product quality by rapidly
More informationOverview of Product Information Interoperability Using STEP (ISO 10303)
Overview of Product Information Interoperability Using STEP (ISO 10303) Diego Tamburini 1997 For Georgia Tech ME6754 et al. 5/98 Updates - M. C. Ramesh 11/00 Updates - R. Peak 1 Product Information Interoperability
More informationANALYSIS AND VISUALIZATION OF COMPLEX COMPUTER AIDED DESIGN MODELS AS A DESIGN STRUCTURE MATRIX
13 TH INTERNATIONAL DEPENDENCY AND STRUCTURE MODELLING CONFERENCE, DSM 11 CAMBRIDGE, MASSACHUSETTS, USA, SEPTEMBER 14 15, 2011 ANALYSIS AND VISUALIZATION OF COMPLEX COMPUTER AIDED DESIGN MODELS AS A DESIGN
More informationToward Simulation-Based Design
Toward Simulation-Based Design Mark S. Shephard Scientific Computation Research Center, Rensselaer Polytechnic Institute, Troy, NY 12810 Mark W. Beall, Robert M. O Bara, Bruce E. Webster Simmetrix, Inc.,
More informationGeometric Modeling. Introduction
Geometric Modeling Introduction Geometric modeling is as important to CAD as governing equilibrium equations to classical engineering fields as mechanics and thermal fluids. intelligent decision on the
More informationFinite element method - tutorial no. 1
Martin NESLÁDEK Faculty of mechanical engineering, CTU in Prague 11th October 2017 1 / 22 Introduction to the tutorials E-mail: martin.nesladek@fs.cvut.cz Room no. 622 (6th floor - Dept. of mechanics,
More informationChapter 9 3D Modeling
Chapter 9 3D Modeling Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display. 3D Modeling Snapshot Since Mid 1980 s become common place in industry Software Types Wireframe
More informationNX Advanced Simulation
Siemens PLM Software Integrating FE modeling and simulation streamlines product development process Benefits Speed simulation processes by up to 70 percent Perform accurate, reliable structural analysis
More informationCAD embedding and integration analysis of CFD and Electromagnetic simulation, with Confidence
CAD embedding and integration analysis of CFD and Electromagnetic simulation, with Confidence Summary Fred Mendonça, CD-adapco, London fred@uk.cd-adapco.com Process Integration, Partnership, CAE Workflow,
More informationFor Structural analysis, Thermal analysis, Mechanisms simulation and other Fields
What is SAMCEF Field? An Integrated Environment for CAE Modeling, Analysis and Results processing For Structural analysis, Thermal analysis, Mechanisms simulation and other Fields SAMTECH s.a. - www.samcef.com
More informationCGNS Steering Committee Telecon Minutes 25 May :00 AM Eastern Time
CGNS Steering Committee Telecon Minutes 25 May 2005 11:00 AM Eastern Time 1. The meeting was called to order at 11:05 AM. There were 11 attendees, listed in Attachment 1. 2. The minutes of the 16 March
More informationIntroduction to Solid Modeling Parametric Modeling. Mechanical Engineering Dept.
Introduction to Solid Modeling Parametric Modeling 1 Why draw 3D Models? 3D models are easier to interpret. Simulation under real-life conditions. Less expensive than building a physical model. 3D models
More informationAerodynamic Analysis of Forward Swept Wing Using Prandtl-D Wing Concept
Aerodynamic Analysis of Forward Swept Wing Using Prandtl-D Wing Concept Srinath R 1, Sahana D S 2 1 Assistant Professor, Mangalore Institute of Technology and Engineering, Moodabidri-574225, India 2 Assistant
More informationNX Advanced Simulation: FE modeling and simulation
Advanced Simulation: FE modeling and simulation NX CAE Benefits Speed simulation processes by up to 70 percent Increase product quality by rapidly simulating design trade-off studies Lower overall product
More informationAir Force Materiel Command
Air Force Materiel Command Developing, Fielding, and Sustaining America s Aerospace Force High-Fidelity Physics- Based Modeling in Support of Test & Evaluation Dr. Ed Kraft AEDC/CZ NDIA M&S Conference
More informationAn Introduction to SySML
An Introduction to SySML Ljerka Beus-Dukic University of Westminster, London, UK L.Beus-Dukic@wmin.ac.uk 2007, Ljerka Beus-Dukic 1 What is SySML? SysML is a graphical modelling language for Systems Engineering
More informationTest Suite for the CAx Implementor Forum Round 9J December 2001 March 2002
Test Suite for the CAx Implementor Forum Round 9J December 2001 March 2002 Release 2.0 February 20 th, 2002 Contacts: Jochen Boy ProSTEP GmbH Dolivostraße 11 64293 Darmstadt/Germany jboy@prostep.de Phil
More informationIntroduction to Abaqus. About this Course
Introduction to Abaqus R 6.12 About this Course Course objectives Upon completion of this course you will be able to: Use Abaqus/CAE to create complete finite element models. Use Abaqus/CAE to submit and
More informationINTEGRATION OF MSC.FLIGHTLOADS AND DYNAMICS AT LOCKHEED MARTIN AERONAUTICS COMPANY * Dan Egle Lockheed Martin Aeronautics Company Fort Worth, TX
INTEGRATION OF MSC.FLIGHTLOADS AND DYNAMICS AT LOCKHEED MARTIN AERONAUTICS COMPANY * Dan Egle Lockheed Martin Aeronautics Company Fort Worth, TX John Ausman MSC.Software Corporation Santa Ana, CA Abstract
More informationThe Role of Finite Element Analysis in Light Aircraft Design and Certification
The Role of Finite Element Analysis in Light Aircraft Design and Certification Nigel Bamber Wey Valley Aeronautics Ltd www.weyvalleyaero.co.uk Engineering Consultancy Civil and Military Aerospace and Motorsport
More informationIntegrating multi-body simulation and CFD: toward complex multidisciplinary design optimisation
Integrating multi-body simulation and CFD: toward complex multidisciplinary design optimisation Federico Urban ESTECO Italy Martin Mühlmeier AUDI Germany Stefano Pieri Department of Energetics University
More informationASSOCIATIVE SIZING OF AERONAUTICAL STRUCTURES FROM CATIA V5 TO SAMCEF : APPLICATIONS TO STATIC AND BIRD IMPACT ANALYSES
ASSOCIATIVE SIZING OF AERONAUTICAL STRUCTURES FROM CATIA V5 TO SAMCEF : APPLICATIONS TO STATIC AND BIRD IMPACT ANALYSES A.P. Gonze & J. Verstuyft SONACA S.A. Abstract : This paper presents an associative
More informationIndustrial finite element analysis: Evolution and current challenges. Keynote presentation at NAFEMS World Congress Crete, Greece June 16-19, 2009
Industrial finite element analysis: Evolution and current challenges Keynote presentation at NAFEMS World Congress Crete, Greece June 16-19, 2009 Dr. Chief Numerical Analyst Office of Architecture and
More informationFEMAP All Rights Reserved NASTRAN 1
FEMAP 1 Overview Femap V10.3 is a Windows-native pre- and postprocessor used by engineering organizations world wide to model various products, processes, and systems. Its graphical user interface provides
More informationAFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse
AFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse Andy Attfield, Siemens PLM Unrestricted Responding to Industry Trends Open Standards to address Process Complexity Standard CaX formats
More informationYour Home for Advanced Aerodynamic/ Aeroelastic/Aeroservoelastic/Computer Aided Engineering Software Products and Services
Your Home for Advanced Aerodynamic/ Aeroelastic/Aeroservoelastic/Computer Aided Engineering Software Products and Services About ZONA ZONA Technology, Inc. (ZONA) is a privately held company that was founded
More informationProgram: Advanced Certificate Program
Program: Advanced Certificate Program Course: CFD-Vehicle Aerodynamics Directorate of Training and Lifelong Learning #470-P, Peenya Industrial Area, 4th Phase Peenya, Bengaluru 560 058 www.msruas.ac.in
More informationMSC Software Aeroelastic Tools. Mike Coleman and Fausto Gill di Vincenzo
MSC Software Aeroelastic Tools Mike Coleman and Fausto Gill di Vincenzo MSC Software Confidential 2 MSC Software Confidential 3 MSC Software Confidential 4 MSC Software Confidential 5 MSC Flightloads An
More informationLecture 1 GENERAL INTRODUCTION: HISTORICAL BACKGROUND AND SPECTRUM OF APPLICATIONS
Lecture 1 GENERAL INTRODUCTION: HISTORICAL BACKGROUND AND SPECTRUM OF APPLICATIONS 1.1 INTRODUCTION Analysis of physical problems in any area of engineering and science involves a multipronged approach:
More informationSIMULATION CAPABILITIES IN CREO
SIMULATION CAPABILITIES IN CREO Enhance Your Product Design with Simulation & Using digital prototypes to understand how your designs perform in real-world conditions is vital to your product development
More informationSimulation Model Creation and Assembly Essentials. R2014x
Simulation Model Creation and Assembly Essentials R2014x About this Course Course objectives Upon completion of this course you will be able to: Clean and repair native and imported geometry. Use advanced
More informationSimcenter 3D Structures
Simcenter 3D Structures Integrating FE modeling and simulation streamlines product development Benefits Speed simulation processes by up to 70 percent Perform accurate, reliable structural analysis with
More informationDigital-X. Towards Virtual Aircraft Design and Testing based on High-Fidelity Methods - Recent Developments at DLR -
Digital-X Towards Virtual Aircraft Design and Testing based on High-Fidelity Methods - Recent Developments at DLR - O. Brodersen, C.-C. Rossow, N. Kroll DLR Institute of Aerodynamics and Flow Technology
More informationEnabling Efficient Optimization / Sensitivity and Robustness Analysis for Crashworthiness, NVH, and Multi-disciplinary Concept Assessments
Parametric Modeling of Car Body Structures Enabling Efficient Optimization / Sensitivity and Robustness Analysis for Crashworthiness, NVH, and Multi-disciplinary Concept Assessments White Paper by Dr.
More informationNX Advanced FEM. Benefits
Advanced FEM fact sheet Siemens PLM Software www.siemens.com/plm Summary Advanced FEM software is a comprehensive multi-cad finite element modeling and results visualization product that is designed to
More information2D CAD. Courseware Issued: DURATION: 64 hrs
2D CAD Introduction File management Orthographic drawings View management Display management Layer management Selection methods Parametric drawings Symbol creation using block BOM / Joinery details creation
More informationMSC.Patran Laminate Modeler
MSC.Patran Laminate Modeler PRODUCT LINE MSC.Patran OVERVIEW For the development of optimized laminated structures CAPABILITIES Calculate failure indices Optimize materials, plies, and layups Size zones
More informationAutomated CFD blade design within a CAD system
Automated CFD blade design within a CAD system Petter Andersson, Volvo Aero Corporation, Sweden Malin Ludvigson, Volvo Aero Corporation, Sweden Ola Isaksson, Volvo Aero Corporation, Sweden Summary: The
More informationPRODUCT RELEASE ANNOUNCEMENT
Product Category Visualize 3D Product Group CATIA V5 for CREO Release Version 19.3 Document Type Product Release Announcement Status Released Revision 1.0 Author Product Manager Issued 10/08/2016 THEOREM
More informationA GRAPHICALLY INTERACTIVE APPROACH TO STRUCTURED AND UNSTRUCTURED SURFACE GRID QUALITY ANALYSIS. John E. Stewart * Jamshid S.
A GRAPHICALLY INTERACTIVE APPROACH TO STRUCTURED AND UNSTRUCTURED SURFACE GRID QUALITY ANALYSIS John E. Stewart * Jamshid S. Abolhassani Abstract A graphically interactive approach to structured and unstructured
More informationGEOMETRY MODELING & GRID GENERATION
GEOMETRY MODELING & GRID GENERATION Dr.D.Prakash Senior Assistant Professor School of Mechanical Engineering SASTRA University, Thanjavur OBJECTIVE The objectives of this discussion are to relate experiences
More informationmidas NFX An insight into midas NFX
midas NFX An insight into midas NFX Total Analysis Solutions for Multi-disciplinary Optimum Design Part 1. Work environment Multi-disciplinary CAE solutions in one unique work environment 1 Part 1. Work
More informationValidation of an Unstructured Overset Mesh Method for CFD Analysis of Store Separation D. Snyder presented by R. Fitzsimmons
Validation of an Unstructured Overset Mesh Method for CFD Analysis of Store Separation D. Snyder presented by R. Fitzsimmons Stores Separation Introduction Flight Test Expensive, high-risk, sometimes catastrophic
More informationTest Suite for the CAx Implementor Forum Round 30J
Test Suite for the CAx Implementor Forum Round 30J March September 2012 Release 1.0 June 14, 2012 Jochen Boy ProSTEP ivip Association Dolivostraße 11 64293 Darmstadt / Germany jochen.boy@prostep.com Contacts
More informationCGNS Steering Committee Telecon Minutes 7 January :00 AM Eastern Time
CGNS Steering Committee Telecon Minutes 7 January 2009 11:00 AM Eastern Time 1. The face-to-face meeting was called to order at 7:05 PM eastern time, in Orlando FL at the AIAA ASM Conference. There were
More informationGeometric Modeling Topics
Geometric Modeling Topics George Allen, george.allen@siemens.com Outline General background Convergent modeling Multi-material objects Giga-face lattices Page 2 Boundary Representation (b-rep) Topology
More informationFinite Element Analysis of Von Mises Stresses & Deformation at Tip of Cutting Tool
Finite Element Analysis of Von Mises Stresses & Deformation at Tip of Cutting Tool Maheshwari N Patil Shreepad Sarange Dr.D.Y.Patil Institute of Engineering & Technology, Ambi Dr.D.Y.Patil College of Engineering,Lohegaon
More informationmidas NFX 2017R1 Release Note
Total Solution for True Analysis-driven Design midas NFX 2017R1 Release Note 1 midas NFX R E L E A S E N O T E 2 0 1 7 R 1 Major Improvements Midas NFX is an integrated finite element analysis program
More informationProduct Synthesis. DMU - Engineering Analysis Review 2 (ANR) CATIA V5R18
Product Synthesis DMU - Engineering Analysis Review 2 (ANR) CATIA V5R18 Product Synthesis DMU - Engineering Analysis Review Provide an easy-to-use capability to visualize and perform DMU reviews of Engineering
More informationGeometric Modeling. Creating 3D solid geometry in a computer! MAE 455 Computer-Aided Design and Drafting
Geometric Modeling Creating 3D solid geometry in a computer! Partial History of Geometric Modeling 1963 Wireframe Computer Graphics Invented (Ivan Sutherland, MIT) 2 Partial History 1964 DAC-1, General
More informationMultidisciplinary design optimization (MDO) of a typical low aspect ratio wing using Isight
Multidisciplinary design optimization (MDO) of a typical low aspect ratio wing using Isight Mahadesh Kumar A 1 and Ravishankar Mariayyah 2 1 Aeronautical Development Agency and 2 Dassault Systemes India
More informationimaginit.com/simulation Complete and robust mechanical simulation solution
imaginit.com/simulation Complete and robust mechanical simulation solution A mechanical simulation solution for finite imaginit.com/simulation element analysis powered by the Autodesk Nastran solver Accurately
More informationCAD Working Group, SIGGRAPH CAD-to-X3D Conversion for Product Structure, Geometry Representation and Metadata
CAD Working Group, SIGGRAPH 2014 CAD-to-X3D Conversion for Product Structure, Geometry Representation and Metadata Hyokwang Lee and Don Brutzman Web3D Korea Chapter / Web3D CAD Working Group 2015. 8. 11.
More informationLecture 1 Course Introduction
UMass Lowell Computer Science 91.580.201 Geometric Modeling Prof. Karen Daniels Spring, 2009 Lecture 1 Course Introduction Course Introduction What is Geometric Modeling? Adapted from: Geometric Modeling
More informationFuture Trends in the CAD The Death of the File. Sean Barker BAE Systems Advanced Technology Centre
Future Trends in the CAD The Death of the File Sean Barker BAE Systems Advanced Technology Centre Message For engineering, the file will be replaced by the database therefore data sustainment must change
More informationNX Advanced FEM. fact sheet
Advanced FEM fact sheet www.ugs.com Summary Advanced FEM is a comprehensive multi-cad finite element modeling and results visualization product that is designed to meet the needs of experienced CAE analysts.
More informationFinite Element Analysis Using Creo Simulate 4.0
Introduction to Finite Element Analysis Using Creo Simulate 4.0 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationANSA. Training Course Content
ANSA µeta Training Course Content BETA CAE Systems USA, Inc., 29800 Middlebelt Road, Suite # 100, Farmington Hills, MI 48334 Ansa Hotline: (248) 737-9760 x 5; Technical Support: support@ansa-usa.com; Website:
More informationMT 21_CAD/CAM 3(1-2) Than Lin, Ph.D. Assistant Professor Asian Institute of Technology. Lecture: Week 1
MT 21_CAD/CAM 3(1-2) Lecture: Week 1 Than Lin, Ph.D. Assistant Professor Asian Institute of Technology 1 Grading: Quizzes (5%) Mid-Term Exam (30%) Laboratory Exercises (10%) & Project (15%) and Final Exam
More informationStatus of the ISO-STEP Initiative for CGNS-Based Fluid Dynamics Standard
Status of the ISO-STEP Initiative for CGNS-Based Fluid Dynamics Standard Presented to the AIAA CGNS Subcommittee January 9, 2001 Raymond R. Senior Technical Fellow Boeing, Phantom Works St. Louis, MO (314)
More informationInaugural OpenVSP Workshop
Inaugural OpenVSP Workshop Rob McDonald San Luis Obispo August 22, 2012 Geometry as Origin of Analysis (Design) Shape is fundamental starting point for physics-based analysis Aerodynamics Structures Aeroelasticity
More informationProposal for ISO/IEC SC24 Technical Report: CAD-to-X3D Conversion for Product Structure, Geometry Representation and Metadata
Proposal for ISO/IEC SC24 Technical Report: CAD-to-X3D Conversion for Product Structure, Geometry Representation and Metadata Hyokwang Lee and Don Brutzman Web3D Korea Chapter / Web3D CAD Working Group
More informationTest Suite for the CAD work package of the STEP AP242 Benchmark #2
Test Suite for the CAD work package of the STEP AP242 Benchmark #2 February 2016 October 2016 April 15th, 2016 Contacts Kevin Le Tutour Boost Conseil 30 rue de Miromesnil 75008 Paris /France kevin.letutour@boost-conseil.com
More informationSnP-1 Project Proposal for RP A-6 as an ANSI Standard
1. Proposed title of Recommended Practice: Standard Coordinate System for Reporting the Mass Properties of Flight Vehicles RP A-6 (proposal to ANSI standard) 2. Proposed Consensus Body Chair (CB Chair):
More informationTHE BENEFIT OF ANSA TOOLS IN THE DALLARA CFD PROCESS. Simona Invernizzi, Dallara Engineering, Italy,
THE BENEFIT OF ANSA TOOLS IN THE DALLARA CFD PROCESS Simona Invernizzi, Dallara Engineering, Italy, KEYWORDS automatic tools, batch mesh, DFM, morphing, ride height maps ABSTRACT In the last few years,
More informationChapter 12 Solid Modeling. Disadvantages of wireframe representations
Chapter 12 Solid Modeling Wireframe, surface, solid modeling Solid modeling gives a complete and unambiguous definition of an object, describing not only the shape of the boundaries but also the object
More informationProposal for ISO/IEC SC24 Technical Report:
Proposal for ISO/IEC SC24 Technical Report: CAD-to-X3D Conversion for Product Structure, Geometry Representation and Metadata And X3D Printing and Scanning Hyokwang Lee and Don Brutzman Web3D Korea Chapter
More informationHM-1 Committee for Integrated Vehicle Health Management. PHM Society Panel Discussion September 26, 2012
HM-1 Committee for Integrated Vehicle Health Management PHM Society Panel Discussion September 26, 2012 Goals for HM-1 Committee Review industry experience and the state-of-the-art technologies for integrated
More informationFemap v and NX Nastran v9.1
Femap v11.1.2 and NX Nastran v9.1 Technical Seminar for Femap and NX Nastran Users Hosted by: Adrian Jensen, BSME, P.E., Sr Staff Mechanical Engineer George Laird, PhD, PE, Principal Mechanical Engineer
More informationComputer Aided Design Applications MMJ 1543
Computer Aided Design Applications MMJ 1543 Dr Jamaludin Mohd Taib jamalt@fkm.utm.my http://www.fkm.utm.my/~jamalt Lecture 1 1 Computer Aided Design Computer Graphics Geometric Modelling CAD Tools in design
More informationBuyer s guide for FEA software
Answers for industry. Buyer s guide for FEA software Tips to help you select an FEA solution siemens.com/plm/femap 2 To enable effective finite element modeling and analysis, don t overlook the pre- and
More informationAbaqus/CAE: Geometry Import and Meshing
Abaqus/CAE: Geometry Import and Meshing Day 1 Overview of Abaqus/CAE Lecture 1 Demonstration 1 Demonstration 2 Workshop 1 Workshop 2 Workshop 3 Geometry Import and Repair Geometry Import and Repair: Lens
More informationDevelopment of a computational method for the topology optimization of an aircraft wing
Development of a computational method for the topology optimization of an aircraft wing Fabio Crescenti Ph.D. student 21 st November 2017 www.cranfield.ac.uk 1 Overview Introduction and objectives Theoretical
More informationTOPOLOGY OPTIMIZATION OF WING RIBS IN CESSNA CITATION
TOPOLOGY OPTIMIZATION OF WING RIBS IN CESSNA CITATION [1],Sathiyavani S [2], Arun K K [3] 1,2 student, 3 Assistant professor Kumaraguru College of technology, Coimbatore Abstract Structural design optimization
More informationANALYSIS OF AIRCRAFT WING WITH DIFFERENT MATERIALS USING ANSYS SOFTWARE
ANALYSIS OF AIRCRAFT WING WITH DIFFERENT MATERIALS USING ANSYS SOFTWARE K.Ravindra 1, P.V Divakar Raju 2 1 PG Scholar,Mechanical Engineering,Chadalawada Ramanamma Engineering College,Tirupati,Andhra Pradesh,India.
More informationCODE Product Solutions
CODE Product Solutions Simulation Innovations Glass Fiber Reinforced Structural Components for a Group 1 Child Harold van Aken About Code Product Solutions Engineering service provider Specialised in Multiphysics
More informationReasoning Boolean Operation for Modeling, Simulation and Fabrication of Heterogeneous Objects. Abstract
Reasoning Boolean Operation for Modeling, Simulation and Fabrication of Heterogeneous Objects X. Hu, T. Jiang, F. Lin, and W. Sun Department of Mechanical Engineering and Mechanics, Drexel University,
More informationVALLIAMMAI ENGINEERING COLLEGE
VALLIAMMAI ENGINEERING COLLEGE SRM Nagar, Kattankulathur 603 203 DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK M.E: CAD/CAM I SEMESTER ED5151 COMPUTER APPLICATIONS IN DESIGN Regulation 2017 Academic
More informationRecent Advances in MSC/PATRAN Pre-Processing Software Allows Modeling of Complex Automotive Lamp Designs
Recent Advances in MSC/PATRAN Pre-Processing Software Allows Modeling of Complex Automotive Lamp Designs William I. Moore, Eric S. Donovan and Christopher R. Powers Delphi Interior and Lighting Systems
More information