AFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse
|
|
- Ashlynn Welch
- 5 years ago
- Views:
Transcription
1 AFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse Christian Caillet Datakit
2 Presentation : Datakit - CrossCADWare Content Product : Datakit CrossCADWare suite - CrossCADWare (library components for integration in an application) - CrossManager (conversion application) - CrossCADPlg (plugins for SW, OCC..) Next Slides Table of functional capabilities Additional Information - Domain (Geometry, PMI, Modelling, others on MBD, PDM) - for each item, status - R&D projects - AP242 group - Pilots : LOTAR - IF Test in progress or to come : CA-IF, PDM-IF - COTS: able, planned AP242 E2 IS = 2019, (later)
3 CAD functional capabilities supported by the STEP AP242 interface Datakit CrossCADWare suite Implementation Format CAD information 3D geometry 3D Product & Manufacturing Information - PMI (GD&T, 3D annotations, 3D symbols, UDA) Assembly structure Kinematics Composite design Electrical Wiring Harness STEP compressed file Validation Properties 3D exact BREP representation 3D tessellated BREP representation presentation (color, layers, transparency, invisibility, etc) graphic presentation semantic representation 1 STEP file with assembly structure and 3D geometry 1 assembly with references to CAD 3D files) nested assembles with references to CAD 3D files) Motion Mechanism Ply definition based on exact surface Ply definition based on 3D tessellated solid BREP Topology (AP242 ed2 DIS) Wire list (AP242 ed2 DIS) P21- AIM ML BO M. Pilot 3D geometry, PMI, assembly structure, composite Additional information on the version(s) of the COTS AP242 interface: next slides 17 October Christian Caillet - c.caillet@datakit.com Level of implementation IF test 3 COTS E2 IS? E2 IS?
4 PDM functional capabilities supported by the STEP AP242 interface Datakit CrossCADWare suite PDM information "As Designed" PDM product structure Nested PDM product structure Assembly validation properties Lifecycle management Document structure Person and organization Date and Time Classification Material properties Customized PDM properties Configuration management - based on effectivities Configuration management - based on specifications Implementation Format P21- AIM ML BO M. (R) (R) Level of implementation Pilot (R) COTS (R) (R) (R) (R) (R) E2 IS? (R) E2 IS? Additional information on the version(s) of the COTS AP242 interface: next slides 17 October Christian Caillet - c.caillet@datakit.com IF test 4
5 CrossCADWare Additional Informations Additional Information on 3D Geometry In COTS : read mode normal (full computation of geometry) or fast (computation deferred to caller) Validation properties : read, read+check, write on geometry, tessellation.. For E2 IS : tessellation with parameters, curved triangles (read) Later : tessellation with curved triangles (write) IF Test to come : Persistent ID on geometry, PMI 5
6 CrossCADWare Additional Informations Additional Information on PMI & Modelling For E2 IS : PMI with placeholder, enhanced validation properties For E2 IS according to IF tests : new types of PMI Continuing, according to IF tests & pilots : PMI in assembly, view in assembly Topic of AP242 group + IF tests to come : Hole Features (with tolerancing) Topic of AP242 group + Pilots to come (after E2) : Holes & Fasteners 6
7 CrossCADWare Additional Informations On other domains of MBD LOTAR Pilot : Electrical Harness (coming works on product structure, E2, validation properties) AP242 group : Additive Manufacturing (discussions on standard, proofs of concept) R&D : User Defined Features, 3D parametric model, Machining Features (proposals, proofs of concept) Follow-up on STEP-NC AP238 7
8 CrossCADWare Additional Informations Additional Information on PDM Frame : PDM-IF, on Business Objects Model in ML Read/Write CAD Assemblies, parts as STEP Part21 or other formats Read PDM data Current works on : effectivities, attributes Preparing upgrade to AP242E2 8
9 MERCI DE VOTRE ATTENTION Christian Caillet Datakit 9
AFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse. Presentation by DASSAULT SYSTEMES
AFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse Presentation by DASSAULT SYSTEMES CAD functional capabilities supported by the STEP AP242 interface 3DEXPERIENCE 3D geometry 3D Product
More informationAFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse
AFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse Presentation by Trevor Leeson Theorem Solutions Date 09/10/2018, Theorem Solutions CAD functional capabilities supported by the STEP AP242
More informationAFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse , G. Wahu
AFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse 16.10.2018, G. Wahu ABOUT CORETECHNOLOGIE CT is the leading supplier of CAD interoperability software solutions n More than 15 years of
More informationAFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse
AFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse Andy Attfield, Siemens PLM Unrestricted Responding to Industry Trends Open Standards to address Process Complexity Standard CaX formats
More informationAFNeT STEP AP242 Benchmark
e AFNeT STEP AP242 Benchmark Test report for the STEP AP242 Benchmark #1 Short Report September 2015 Preamble AFNeT mission is to promote the use of digital technologies in the extended enterprise. The
More informationAFNeT STEP AP242 Benchmark
e AFNeT STEP AP242 Benchmark Test report for the STEP AP242 Benchmark #2 CAD test cases - Short Report v1.1 June 2017 Related websites AP242 project: AP242 Benchmark: PDM-IF: CAx-IF: http://www.ap242.org/
More informationTest Suite for the CAD work package of the STEP AP242 Benchmark #2
Test Suite for the CAD work package of the STEP AP242 Benchmark #2 February 2016 October 2016 April 15th, 2016 Contacts Kevin Le Tutour Boost Conseil 30 rue de Miromesnil 75008 Paris /France kevin.letutour@boost-conseil.com
More informationKick Off meeting teleconference
AP242 Benchmark #2 1 Kick Off meeting teleconference CAD test cases - Workpackage n 1 16 th of February 2016 Report v1 benchmark.ap242.org Attendees 2 n Jochen Boy n Chris Fellows n Jacques Heinisch n
More informationProposal for ISO/IEC SC24 Technical Report: CAD-to-X3D Conversion for Product Structure, Geometry Representation and Metadata
Proposal for ISO/IEC SC24 Technical Report: CAD-to-X3D Conversion for Product Structure, Geometry Representation and Metadata Hyokwang Lee and Don Brutzman Web3D Korea Chapter / Web3D CAD Working Group
More informationImplementor Forums : CAx-IF and CAE-IF to accelerate interoperability solutions availability
Implementor Forums : CAx-IF and CAE-IF to accelerate interoperability solutions availability By Jean-Marc CREPEL, Associated CAE Expert, AFNeT April 19 & 20, AFNeT Standardization Days - Paris 1 The LOTAR
More informationISO ed2 Overview and Status September, Keith A. Hunten, P.E. Lockheed Martin Aeronautics Co. Advanced Development Programs
ISO 10303-209 ed2 Overview and Status September, 2013 Keith A. Hunten, P.E. Lockheed Martin Aeronautics Co. Advanced Development Programs AP 209 ed2 Status The first edition of AP209 has been modularized
More informationCAD Working Group, SIGGRAPH CAD-to-X3D Conversion for Product Structure, Geometry Representation and Metadata
CAD Working Group, SIGGRAPH 2014 CAD-to-X3D Conversion for Product Structure, Geometry Representation and Metadata Hyokwang Lee and Don Brutzman Web3D Korea Chapter / Web3D CAD Working Group 2015. 8. 11.
More informationProposal for ISO/IEC SC24 Technical Report:
Proposal for ISO/IEC SC24 Technical Report: CAD-to-X3D Conversion for Product Structure, Geometry Representation and Metadata And X3D Printing and Scanning Hyokwang Lee and Don Brutzman Web3D Korea Chapter
More informationTest Suite for the CAx Implementor Forum Round 30J
Test Suite for the CAx Implementor Forum Round 30J March September 2012 Release 1.0 June 14, 2012 Jochen Boy ProSTEP ivip Association Dolivostraße 11 64293 Darmstadt / Germany jochen.boy@prostep.com Contacts
More information3D Visualization. Requirements Document. LOTAR International, Visualization Working Group ABSTRACT
3D Visualization Requirements Document LOTAR International, Visualization Working Group ABSTRACT The purpose of this document is to provide the list of requirements and their associated priorities related
More informationPresentation at ProSTEP Symposium 2010
Presentation at ProSTEP Symposium 2010 Winfried Weber, T-Systems International GmbH April 28, 2010 COM/FOX enables high end applications of JT and PLMXML This presentation describes a case study based
More informationParallel Geometry Validation
Parallel Geometry Validation Cristina Martínez Gulfstream Aerospace Corporate Product Lifecycle Management GPDIS_2018.ppt 1 Agenda Gulfstream Product Line Project Schedule 3D Model Based Type Design (MBTD)
More information6th JT Application Benchmark SHORT REPORT
ProSTEP ivip/vda JT Application Benchmark 6th JT Application Benchmark SHORT REPORT JT Application Benchmark TABLE OF CONTENTS Contents Table of Contents 3 Disclaimer 4 Copyright 4 1 Introduction 5 2 Approach
More informationPRODUCT RELEASE ANNOUNCEMENT
Product Category Visualize 3D Product Group CATIA V5 for CREO Release Version 19.3 Document Type Product Release Announcement Status Released Revision 1.0 Author Product Manager Issued 10/08/2016 THEOREM
More informationWebinar Lose Your Paper Manuals Integrate Interactive Work Instructions
Webinar Lose Your Paper Manuals Integrate Interactive Work Instructions August 11 th, 2016 2016 PROSTEP, Inc. No part of this presentation may be reproduced or transmitted in any form for any purpose without
More informationTowards a Curation and Preservation Architecture for CAD Engineering Models
Towards a Curation and Preservation Architecture for CAD Engineering Models Alex Ball, Lian Ding, Manjula Patel University of Bath Outline Introduction Industrial Context Computer-aided design (CAD) Management
More informationTest Suite for the CAx Implementor Forum Round 9J December 2001 March 2002
Test Suite for the CAx Implementor Forum Round 9J December 2001 March 2002 Release 2.0 February 20 th, 2002 Contacts: Jochen Boy ProSTEP GmbH Dolivostraße 11 64293 Darmstadt/Germany jboy@prostep.de Phil
More informationStructural Analysis Interoperability based on ISO STEP AP209: Scope and status of implementation
Structural Analysis Interoperability based on ISO STEP AP209: Scope and status of implementation AFNeT Standardization Days Paris, 19 th April 2017 Presented by Albert Lévy (CIMPA, on behalf of Airbus)
More informationCAD Comparison and Related Technology For Enhanced Digital Workflows
CAD Comparison and Related Technology For Enhanced Digital Workflows Thursday, November 16, 2017 Annalise Suzuki Director of Technology & Engagement Elysium Company Intro 30+ Years of CAD Expertise Strong
More informationNX Collaboration and Supplier Exchange. Andy Attfield, Siemens PLM
NX Collaboration and Supplier Exchange Andy Attfield, Siemens PLM Agenda Three Challenges The JT Solution A Day in the Life of AeroKabins GmbH. The Hybrid Solution A Day in the Life of TurboFan-tastic
More informationWebinar. Search No Further D PDF Pro, Version 2.2 is Here! June 16 th, PROSTEP, Inc.
Webinar Search No Further... - 3D PDF Pro, Version 2.2 is Here! June 16 th, 2016 2016 PROSTEP, Inc. No part of this presentation may be reproduced or transmitted in any form for any purpose without the
More informationVPI. Update for PLM Seed Grant and Associated Work. Virtual Product Integration. Nathan Hartman Christoph Hoffmann
Update for PLM Seed Grant and Associated Work Nathan Hartman Christoph Hoffmann Adrian Lim, Andrew Gunselman, Mark Potrzebowski, Adam Shelton Original Project Objectives A case study to identify geometric
More informationWebinar. 2016: The Year of 3D PDF - Why we still need client based 3D PDF conversion January 21st, PROSTEP, Inc.
Webinar 2016: The Year of 3D PDF - Why we still need client based 3D PDF conversion January 21st, 2016 2016 PROSTEP, Inc. No part of this presentation may be reproduced or transmitted in any form for any
More informationJWG16 - Formats for visualization and other derived forms of product data Joint ISO/TC 184/SC 4 - ISO/IEC JTC 1/SC 24 - ISO/TC 171/SC 2 WG
JWG16 - Formats for visualization and other derived forms of product data Joint ISO/TC 184/SC 4 - ISO/IEC JTC 1/SC 24 - ISO/TC 171/SC 2 WG https://isotc.iso.org/livelink/livelink?func=ll&objid=19599172&obja
More informationCurriculum Guide. Creo 4.0
Curriculum Guide Creo 4.0 Live Classroom Curriculum Guide Update to Creo Parametric 4.0 from Creo Parametric 3.0 Introduction to Creo Parametric 4.0 Advanced Modeling using Creo Parametric 4.0 Advanced
More informationFor Structural analysis, Thermal analysis, Mechanisms simulation and other Fields
What is SAMCEF Field? An Integrated Environment for CAE Modeling, Analysis and Results processing For Structural analysis, Thermal analysis, Mechanisms simulation and other Fields SAMTECH s.a. - www.samcef.com
More informationWhite Paper. PROSTEP AG Dolivostrasse Darmstadt Germany Phone Fax
White Paper 3D Formats in the Field of Engineering a Comparison When the source system is not available, too costly to propagate widely, or full model fidelity is not required, neutral 3D formats are essential
More informationCT CoreTechnologie 3D_Evolution Release Note 4.0 SP0
New 3D_Evolution 4.0 version 1. 3D_Evolution 4.0 presents a totally new graphic interface: - Easy to use, - Faster access to tools and commands, - Streamlined interface design, - Larger graphical window,
More informationCreo 3.0. Curriculum Guide
Creo 3.0 Curriculum Guide Live Classroom Curriculum Guide Update to Creo Parametric 3.0 from Creo Parametric 2.0 Introduction to Creo Parametric 3.0 Advanced Modeling using Creo Parametric 3.0 Advanced
More informationTetra4D Converter. Version 5.1. User Guide. Details on how to use Tetra4D Converter
Tetra4D Converter Version 5.1 User Guide Details on how to use Tetra4D Converter Table of Contents Chapter 1: Getting started... 6 Help... 6 Installation and activation... 7 Installation of Acrobat Pro
More information7th JT Application Benchmark SHORT REPORT
ProSTEP ivip/vda 7th SHORT REPORT TABLE OF CONTENTS Contents Table of Contents 3 Disclaimer 4 Copyright 4 1 Introduction 5 2 Approach 5 2.1 Four Steps 5 2.2 Building Blocks 6 2.3 Documentation 6 2.4 Criteria
More informationCollaborative Product Visualization (CPV)
ProSTEP ivip Documentation Referring to PSI 2 Collaborative Product Visualization (CPV) Status: Final ProSTEP ivip Association Abstract ProSTEP ivip s project group Collaborative Product Visualization
More informationData Exchange for Digitalization and the Model Based Enterprise Andy Attfield, Siemens PLM
Data Exchange for Digitalization and the Model Based Enterprise Andy Attfield, Siemens PLM Agenda Three Digitalization Challenges Exchange Format Choices A Day in the Life of TurboFan-tastic Gmbh Exchange
More informationCoCreate OneSpace Modeling Data Adapter
CoCreate OneSpace Modeling 2007 - Data Adapter This document contains the individual datasheets for the native CAD adapters Table of Contents 1. CATIA V4 Data Adapter 2. Unigraphics Data Adapter 3. Pro/ENGINEER
More informationSolidView 2016 Features List
SolidView 2016 Features List SolidView/Lite Features View, measure and modify SVD files from SolidView/Pro. View STL, SFX, SolidWorks, OBJ, AMF and VRML CAD files. SolidView Features View, measure, modify
More information3D Modeling: Surfaces
CS 430/536 Computer Graphics I 3D Modeling: Surfaces Week 8, Lecture 16 David Breen, William Regli and Maxim Peysakhov Geometric and Intelligent Computing Laboratory Department of Computer Science Drexel
More informationSolidView Features List
SolidView 2012.0 Features List SolidView/Lite Features View, measure and modify SVD fi les from SolidView/Pro. View STL, SFX, SolidWorks and VRML CAD fi les. SolidView Features View, measure, modify and
More informationPTC CREO ROADMAP. Raphael Nascimento Product Manager. 3 March, 2016
PTC CREO ROADMAP Raphael Nascimento Product Manager 3 March, 2016 PTC CREO ROADMAP Review of PTC Creo 3.0 New Since June 2014 PTC Creo 4.0 and Beyond 2 PTC CREO ROADMAP Review of PTC Creo 3.0 New Since
More informationFeature and Topology Detection
Feature and Topology Detection Greater possibilities with Capvidia extension and PARTsolutions Cadenas Industry Forum February 5th, 2015 Thomas Tillmann Capvidia GmbH Agenda Company Overview Application
More informationTetra4D Converter. Version 2017 SP2. User Guide Document version: V2.2. Tetra4D Converter 2017 SP2 Users Guide V2.2 1
Tetra4D Converter Version 2017 SP2 User Guide Document version: V2.2 Tetra4D Converter 2017 SP2 Users Guide V2.2 1 Table of Contents Chapter 1: Getting started... 6 Help... 6 Installation and activation...
More informationGeometric Modeling. Introduction
Geometric Modeling Introduction Geometric modeling is as important to CAD as governing equilibrium equations to classical engineering fields as mechanics and thermal fluids. intelligent decision on the
More informationPTC CREO. ESSENTIALS PACKAGES Powerful 3D CAD solutions optimized for your product development tasks. PTC Creo Essentials Packages
PTC CREO PACKAGES Powerful 3D CAD solutions optimized for your product development tasks Product design firms and manufacturing companies are under constant pressure to develop more products in less time,
More informationSolidView Features List
SolidView 2012.1 Features List SolidView/Lite Features View, measure and modify SVD fi les from SolidView/Pro. View STL, SFX, SolidWorks and VRML CAD fi les. SolidView Features View, measure, modify and
More informationPTC Creo 3.0 Unite Technology
PTC Creo 3.0 Unite Technology Marc Schuetz PTC Creo Product Management November 20, 2014 Agenda PTC Creo Unite Technology Breakthrough capabilities to improve productivity in Multi-CAD environments Key
More informationDesign smarter with powerful, easy-to-use 3D CAD solutions
Creo Parametric Essentials Packages Design smarter with powerful, easy-to-use 3D CAD solutions PTC s 3D CAD product design solution, Creo Parametric, gives you the right tools to achieve the highest quality
More informationWhat's New in NX 11 for Design Engineering
What's New in NX 11 for Design Engineering NX 11 for Design Productivity Convergent Modeling Many industries use scanned 3D data as part of their design processes. If you have worked with this data in
More informationSTEP Model Support in PCB Editor
A Parallel Systems Technical Note STEP Model Support in PCB Editor Overview The PCB Editor products currently provide 3D viewing of a BRD (board drawing) based on the open drawings layer visibility and
More informationWeb3D Design Printing and Scanning WG
Web3D Design Printing and Scanning WG formerly CAD Working Group Activities in support of 3D Visualization for CAX activities For presentation to SC 4 WG 16 Nov 2018 3D Visualization always involves a
More informationOn-Board Data Systems
On-Board Data Systems Ph. Armbruster TEC-ED Email: philippe.armbruster@esa.int Slide : 1 Avionics for multi-mission platforms, hard Facts Avionics take an important share of the platform cost Many building
More informationGeometric Modeling Topics
Geometric Modeling Topics George Allen, george.allen@siemens.com Outline General background Convergent modeling Multi-material objects Giga-face lattices Page 2 Boundary Representation (b-rep) Topology
More informationMULTICAx IGES Plug-in
MULTICAx IGES Plug-in Overview What's New User Tasks Requirements Methodologies and Advice Initializing the Environment Importing IGES Data Importing Part Files Interactively Translating Files from the
More informationSOLIDWORKS TECHNICAL COMMUNICATIONS
SOLIDWORKS TECHNICAL COMMUNICATIONS ADDING INNOVATION TO YOUR TECHNICAL COMMUNICATION DELIVERABLES POWERFUL, YET SIMPLE SOLUTIONS TO HELP YOU GROW YOUR BUSINESS You put significant time and money into
More informationUpdate to Creo Parametric 4.0 from Creo Parametric 2.0
Update to Creo from Creo Parametric 2.0 Overview Course Code Course Length TRN-5125-T 16 Hours In this course, you will learn how to utilize the variety of functionality enhancements in Creo. You will
More informationA REUSE METHOD OF MECHANICAL PRODUCT DEVELOPMENT KNOWLEDGE BASED ON CAD MODEL SEMANTIC MARKUP AND RETRIEVAL
A REUSE METHOD OF MECHANICAL PRODUCT DEVELOPMENT KNOWLEDGE BASED ON CAD MODEL SEMANTIC MARKUP AND RETRIEVAL Qinyi MA*, Lu MENG, Lihua SONG, Peng XUE, Maojun ZHOU, Yajun WANG Department of Mechanical Engineering,
More informationJTOpen and JT2Go. Mike Zink Senior Product Mgr. Siemens PLM Software
JTOpen and JT2Go Mike Zink Senior Product Mgr. What is JT JT is an industry focused, high-performance, lightweight, flexible file format for capturing and repurposing 3D data that enables collaboration,
More informationCAD package for electromagnetic and thermal analysis using finite element. CAD geometry import in flux : principle and good practices
CAD package for electromagnetic and thermal analysis using finite element CAD geometry import in flux : principle and good practices Flux Table of contents Table of contents 1. Introduction...1 2. The
More informationCAM Express for machinery
Siemens PLM Software CAM Express for machinery Optimized NC programming for machinery and heavy equipment Benefits Effectively program any type of machinery part Program faster Reduce air cutting Automate
More informationUsing Siemens NX 11 Software. Assembly example - Gears
Using Siemens NX 11 Software Assembly example - Gears Based on a NX tutorial from the NX documentation 1. 1 Introduction. Start NX 11 and create a new assembly file called assembly_gear.prt. 2 Adding a
More informationTGeoCad: an Interface between ROOT and CAD Systems
TGeoCad: an Interface between ROOT and CAD Systems C Luzzi 1 2 and F Carminati 2 1 University of Ferrara, Via Giuseppe Saragat, 1, 44020 FE, Italy 2 CERN, 1211 Geneva 23, Switzerland E-mail: cluzzi@cern.ch
More informationThe Quality Of 3D Models
The Quality Of 3D Models Problems and Solutions for Applications Post-Design Fathi El-Yafi Senior Product Engineer Product Department of EXA Corporation 1 : Overview Status Problems Identified Defect Sources
More informationArbortext IsoDraw 7.1 Curriculum Guide
Arbortext IsoDraw 7.1 Curriculum Guide Live Classroom Curriculum Guide Arbortext IsoDraw 7.1 Foundation with CADprocess Arbortext IsoDraw 7.1 Foundation Arbortext IsoDraw 7.1 CADprocess Arbortext IsoDraw
More informationANSA. Training Course Content
ANSA µeta Training Course Content BETA CAE Systems USA, Inc., 29800 Middlebelt Road, Suite # 100, Farmington Hills, MI 48334 Ansa Hotline: (248) 737-9760 x 5; Technical Support: support@ansa-usa.com; Website:
More information105 - Synchronizing History
4 th Generation VLC courtesy of Edison2 105 - Synchronizing History Matt Lombard, Solid Edge Employee #SEU13 Agenda: 105 - Synchronizing History Who is Matt Lombard? Why you should mix methods (Synchronous
More informationAutoCAD DWG Drawing Limitations in SAP 3D Visual Enterprise 9.0 FP02
AutoCAD DWG Drawing Limitations in SAP 3D Visual Enterprise 9.0 FP02 AutoCAD Import Limitations The following is a list of AutoCAD features that will not give an expected viewable when using SAP 3D Visual
More informationCAD INTEROPERABILITY SOFTWARE SUITE.
CAD INTEROPERABILITY SOFTWARE SUITE www.coretechnologie.com 1 2 TABLE OF CONTENTS CONVERSION 4 FEATURE BASED 6 SIMPLIFIER 8 EDM 10 FEM TOOLS 12 MODELING 14 ADVANCED ANALYZER 16 3 CONVERSION FEATURE BASED
More informationME COMPUTER AIDED DESIGN COMPUTER AIDED DESIGN 2 MARKS Q&A
ME6501 - COMPUTER AIDED DESIGN COMPUTER AIDED DESIGN 2 MARKS Q&A Unit I 1. What is CAD? Computer aided design (CAD) is the technology concerned with the use of computer systems to assist the creation,
More informationUtilities for Analysing the Content of JT Files. Product Release Version 19.3 USER GUIDE
Utilities for Analysing the Content of JT Files Product Release Version 19.3 USER GUIDE Document Revision: 1.0 Issued: 18/08/2016 Contents Overview of JT... 3 Working with JT files...3 The JT File Architecture...3
More informationCreo 2.0. Curriculum Guide
Creo 2.0 Curriculum Guide Live Classroom Curriculum Guide Update to Creo Parametric 2.0 from Creo Elements/Pro 5.0 Update to Creo Parametric 2.0 from Pro/ENGINEER Wildfire 4.0 Introduction to Creo Parametric
More informationSolid Edge ST8. Jon Sutcliffe Majenta PLM / Paul Abbott Siemens. SOLID EDGE UNIVERSITY IRELAND 2015 Design Without Boundaries #SEUIRE15
Jon Sutcliffe Majenta PLM / Paul Abbott Siemens Solid Edge ST8 Solid Edge University Ireland 2015 Dec 8 th, Dublin Restricted Siemens AG 2014 SOLID EDGE UNIVERSITY IRELAND 2015 Design Without Boundaries
More informationSpinFire Ultimate Release Notes
SpinFire Ultimate 11.3.0 Release Notes Overview Supported Environments SpinFire Ultimate 11.3.0 improves on the 11.2.0 release with the addition of several new features, a set of smaller enhancements as
More informationUsing 3D PDF with MIL-STD-31000A BEST PRACTICES 3D PDF CONSORTIUM DRAFT VERSION 3 09/25/17
2017 Using 3D PDF with MIL-STD-31000A BEST PRACTICES 3D PDF CONSORTIUM DRAFT VERSION 3 09/25/17 Table of Contents 1 Introduction 2 2 Background 2 3 The MIL-STD-31000A TDP 2 4 Best Practices for using 3D
More informationSmart Integration of JT in Additive Manufacturing - A Use Case for 3D Printing
Smart Integration of JT in Additive Manufacturing - A Use Case for 3D Printing ProSTEP ivip Symposium 2015 May 6 th, 2015 Marco Grimm, Alexander Christ, Reiner Anderl 1 Outline 1 Motivation 2 Additive
More informationHow To Protect your Intellectual Property
How-To Guide SAP 3D Visual Enterprise Author Document Version: 1.0 2015-01-22 Typographic Conventions Type Style Example Description Words or characters quoted from the screen. These include field names,
More informationFuture Trends in the CAD The Death of the File. Sean Barker BAE Systems Advanced Technology Centre
Future Trends in the CAD The Death of the File Sean Barker BAE Systems Advanced Technology Centre Message For engineering, the file will be replaced by the database therefore data sustainment must change
More informationclustering SVG shapes
Clustering SVG Shapes Integrating SVG with Data Mining and Content-Based Image Retrieval Michel Kuntz Fachhochschule Kaiserslautern Zweibrücken, Germany SVG Open 2010 1 Presentation Overview Context, Problem,
More informationBerlin Institute of Technology Department of Geodesy and Geoinformation Science. Plane Based Free Stationing for Building Models
Berlin Institute of Technology Department of Geodesy and Geoinformation Science Plane Based Free Stationing for Building Models Christian Manthe, Germany 1.05.011 Introduction Motivation Plane based building
More informationAutodesk Fusion 360: Introduction. Overview
Overview Fusion 360 is a cloud-based CAD/CAM tool for collaborative product development. The tools in Fusion enable exploration and iteration on product ideas and collaboration within a product development
More informationFundamentals of STEP Implementation
Fundamentals of STEP Implementation David Loffredo loffredo@steptools.com STEP Tools, Inc., Rensselaer Technology Park, Troy, New York 12180 A) Introduction The STEP standard documents contain such a large
More informationCPSC 695. Data Quality Issues M. L. Gavrilova
CPSC 695 Data Quality Issues M. L. Gavrilova 1 Decisions Decisions 2 Topics Data quality issues Factors affecting data quality Types of GIS errors Methods to deal with errors Estimating degree of errors
More informationTetra4D Reviewer. Version 5.1. User Guide. Details on how to use Tetra4D Reviewer.
Tetra4D Reviewer Version 5.1 User Guide Details on how to use Tetra4D Reviewer. ii Contents Chapter 1: Work area... 7 Looking at the work area... 7 Toolbars and toolbar presets... 8 About toolbars and
More informationPASSPORT. Become a SolidWorks Expert CADTEK S TRAINING INCLUDED COURSES:
SolidWorks TRAINING CADTEK S TRAINING PASSPORT Become a SolidWorks Expert Our training passport is the perfect solution to achieving a high quality skillset and full competency in the SolidWorks software
More informationINTEROPERABILITÀ MODELLAZIONE PARAMETRICA- DIRETTA IN CREO
INTEROPERABILITÀ MODELLAZIONE PARAMETRICA- DIRETTA IN CREO Claudio De Nadai Technical Account Manager Webex, 18/07/2016 AGENDA Direct Modeling in Creo Direct Modeling Use Cases The Round-Trip Summary &
More information2D CAD. Courseware Issued: DURATION: 64 hrs
2D CAD Introduction File management Orthographic drawings View management Display management Layer management Selection methods Parametric drawings Symbol creation using block BOM / Joinery details creation
More information3D CAD Systems: 3D Scanners, Reverse Engineering & Inspection Presenter
3D CAD Systems: 3D Scanners, Reverse Engineering & Inspection Presenter Chris Duchaine Application Engineer Agenda Why 3D Scan? Artec 3D Technology Inspection Reverse Engineering Q&A Why 3D Scanning? 3D
More informationIME CADCAM TRAINING COURSE 2017 SCHEDULE Petaling Jaya (Date change without prior notice)
SOLIDWORKS 3D Modeling Upgrade S-UPG 1 5 17 16 20 18 15 Essentials S-ESS 5 9-13 6-8,10 & 13 6-10 3-7 2-5 & 8 5-9 Essentials (Weekend) S-ESS(WE) 5 Advanced Part Modeling S-APM 3 16-18 14-16 13-15 10-12
More informationLive Classroom Curriculum Guide
Curriculum Guide Live Classroom Curriculum Guide Creo Elements/Pro 5.0 (formerly Pro/ENGINEER Wildfire 5.0) Update from Pro/ENGINEER Wildfire 4.0 Creo Elements/Pro 5.0 (formerly Pro/ENGINEER Wildfire 5.0)
More informationCREO ENGINEER PACKAGES. 3D CAD solutions optimized for your product development tasks
CREO ENGINEER PACKAGES 3D CAD solutions optimized for your product development tasks From the smallest product design firm to the largest, manufacturing organizations are under constant pressure to develop
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 14306 Second edition 2017-11 Industrial automation systems and integration JT file format specification for 3D visualization Systèmes d'automatisation industrielle et intégration
More informationPTC CREO PARAMETRIC ESSENTIALS PACKAGES. Powerful 3D CAD solutions optimized for your product development tasks. Essentials Packages
PTC CREO PARAMETRIC ESSENTIALS PACKAGES Powerful 3D CAD solutions optimized for your product development tasks Product design firms and manufacturing companies are under constant pressure to develop more
More informationModeling the Virtual World
Modeling the Virtual World Joaquim Madeira November, 2013 RVA - 2013/2014 1 A VR system architecture Modeling the Virtual World Geometry Physics Haptics VR Toolkits RVA - 2013/2014 2 VR object modeling
More informationGL9: Engineering Communications. GL9: CAD techniques. Curves Surfaces Solids Techniques
436-105 Engineering Communications GL9:1 GL9: CAD techniques Curves Surfaces Solids Techniques Parametric curves GL9:2 x = a 1 + b 1 u + c 1 u 2 + d 1 u 3 + y = a 2 + b 2 u + c 2 u 2 + d 2 u 3 + z = a
More informationSTEP AP209 ed2 Linear Static Structural FEA Handbook
STEP AP209 ed2 Linear Static Structural FEA Handbook Volume 1: FEA Input for LOTAR EAS Pilot Study #1 Release 2.2 May 16, 2018 Contacts: Jochen Boy PROSTEP AG Dolivostraße 11 64293 Darmstadt / Germany
More informationTekla Structures and Autodesk Revit useful geometry exchange
Tekla Structures and Autodesk Revit useful geometry exchange General guidance: Updated: 2nd June, 2014 (New material is starred) David Lash Engineering Segment FROM Autodesk Revit Architectural to Tekla
More informationDesign Validation Simulation (Basic) SIM-BSC 3 days Simulation Professional SIM-PRO 2 days 2
J- RM SOLIDWORKS 3D Modeling Upgrade S-UPG 1 18 15 13 17 14 19 16 21 Essentials S-ESS 4 days+2days 5 2-5 & 8 5-9 3-7 31-4 4-8 9-13 30,31-3 4-8 Essentials (Weekend) S-ESS(WE) 5 Advanced Part Modeling S-APM
More informationReplacing parts in an assembly
Replacing parts in an assembly Publication Number spse01665 Replacing parts in an assembly Publication Number spse01665 Proprietary and restricted rights notice This software and related documentation
More information