Tracker Software. 103 年 11 月 Department of Physics, NDHU 國立東華大學物理學系製作

I/ Video Capture 1. Remove the len s cover 2. Turn on Computer 3. Open the XCAP For Window icon OK

I/ Video Capture 1. Remove the len s cover 2. Turn on Computer 3. Open the XCAP For Window icon OK 4. Select live to connect CAMERA to Software Adjusting the value in Frame Rate box to increase or decrease

IOP Horizons in Physics. Department of Physics University of Limerick

IOP Horizons in Physics Department of Physics University of Limerick 1 Import Video Using the Video tab Import the video you want to analyse. Your video may not have the correct orientation. If so filters

Visual Physics Camera Parallax Lab 1

In this experiment you will be learning how to locate the camera properly in order to identify and minimize the sources of error that are introduced by parallax and perspective. These sources of error

ROSE-HULMAN INSTITUTE OF TECHNOLOGY

Introduction to Working Model Welcome to Working Model! What is Working Model? It's an advanced 2-dimensional motion simulation package with sophisticated editing capabilities. It allows you to build and

How to Measure Wedge. Purpose. Introduction. Tools Needed

Purpose Optical Wedge Application (OWA) is an add-on analysis tool for measurement of optical wedges in either transmission or reflection. OWA can measure a single part or many parts simultaneously (e.g.

3D Surface Plots with Groups

Chapter 942 3D Surface Plots with Groups Introduction In PASS, it is easy to study power and sample size calculations for a range of possible parameter values. When at least 3 input parameters vary, you

Visual Physics - Introductory Lab Lab 0

Your Introductory Lab will guide you through the steps necessary to utilize state-of-the-art technology to acquire and graph data of mechanics experiments. Throughout Visual Physics, you will be using

Chapter 3: Rate Laws Excel Tutorial on Fitting logarithmic data

Chapter 3: Rate Laws Excel Tutorial on Fitting logarithmic data The following table shows the raw data which you need to fit to an appropriate equation k (s -1 ) T (K) 0.00043 312.5 0.00103 318.47 0.0018

Creating a Text Frame. Create a Table and Type Text. Pointer Tool Text Tool Table Tool Word Art Tool

Pointer Tool Text Tool Table Tool Word Art Tool Picture Tool Clipart Tool Creating a Text Frame Select the Text Tool with the Pointer Tool. Position the mouse pointer where you want one corner of the text

0 Graphical Analysis Use of Excel

Lab 0 Graphical Analysis Use of Excel What You Need To Know: This lab is to familiarize you with the graphing ability of excels. You will be plotting data set, curve fitting and using error bars on the

Three-Dimensional (Surface) Plots

Three-Dimensional (Surface) Plots Creating a Data Array 3-Dimensional plots (surface plots) are often useful for visualizing the behavior of functions and identifying important mathematical/physical features

How to use Excel Spreadsheets for Graphing

How to use Excel Spreadsheets for Graphing 1. Click on the Excel Program on the Desktop 2. You will notice that a screen similar to the above screen comes up. A spreadsheet is divided into Columns (A,

Microsoft Excel. Charts

Microsoft Excel Charts Chart Wizard To create a chart in Microsoft Excel, select the data you wish to graph or place yourself with in the conjoining data set and choose Chart from the Insert menu, or click

ENV Laboratory 2: Graphing

Name: Date: Introduction It is often said that a picture is worth 1,000 words, or for scientists we might rephrase it to say that a graph is worth 1,000 words. Graphs are most often used to express data

Pre-Lab Excel Problem

Pre-Lab Excel Problem Read and follow the instructions carefully! Below you are given a problem which you are to solve using Excel. If you have not used the Excel spreadsheet a limited tutorial is given

Layout. Usual menu tabs. Top toolbar. Right toolbar. Left toolbar. Work area

Layout Top toolbar Usual menu tabs Left toolbar Right toolbar Work area Layout - left toolbar Contains tools like textbox, mediabox, line etc. Textbox tool Mediabox tool Layout - top toolbar Edit size,

BioFuel Graphing instructions using Microsoft Excel 2003 (Microsoft Excel 2007 instructions start on page mei-7)

BioFuel Graphing instructions using Microsoft Excel 2003 (Microsoft Excel 2007 instructions start on page mei-7) Graph as a XY Scatter Chart, add titles for chart and axes, remove gridlines. A. Select

A Simple First-Model Using the Berkeley-Madonna Program

A Simple First-Model Using the Berkeley-Madonna Program For this introduction, we will be creating a model of a simple system with two compartments analogous to containers of a liquid which can flow between

ME 142 Engineering Computation I. Graphing with Excel

ME 142 Engineering Computation I Graphing with Excel Common Questions from Unit 1.2 HW 1.2.2 See 1.2.2 Homework Exercise Hints video Use ATAN to find nominal angle in each quadrant Use the AND logical

To graph the point (r, θ), simply go out r units along the initial ray, then rotate through the angle θ. The point (1, 5π 6. ) is graphed below:

Polar Coordinates Any point in the plane can be described by the Cartesian coordinates (x, y), where x and y are measured along the corresponding axes. However, this is not the only way to represent points

PASS Sample Size Software

Chapter 941 Introduction In PASS, it is easy to study power and sample size calculations for a range of possible parameter values. When at least 2 input parameters vary, you can create stunning 3D power

Goals: Course Unit: Describing Moving Objects Different Ways of Representing Functions Vector-valued Functions, or Parametric Curves

Block #1: Vector-Valued Functions Goals: Course Unit: Describing Moving Objects Different Ways of Representing Functions Vector-valued Functions, or Parametric Curves 1 The Calculus of Moving Objects Problem.

Chapter 10 Working with Graphs and Charts

Chapter 10: Working with Graphs and Charts 163 Chapter 10 Working with Graphs and Charts Most people understand information better when presented as a graph or chart than when they look at the raw data.

Revolve Vertices. Axis of revolution. Angle of revolution. Edge sense. Vertex to be revolved. Figure 2-47: Revolve Vertices operation

Revolve Vertices The Revolve Vertices operation (edge create revolve command) creates circular arc edges or helixes by revolving existing real and/or non-real vertices about a specified axis. The command

TABLE OF CONTENTS INTRODUCTION... 2 OPENING SCREEN BEGIN ANALYSIS... 4 Start a New File or Open a Previously Saved File... 4

3D-BLAST August 2010 TABLE OF CONTENTS INTRODUCTION... 2 OPENING SCREEN... 3 BEGIN ANALYSIS... 4 Start a New File or Open a Previously Saved File... 4 PROGRAM TOOLBAR... 5 NAVIGATING IN THE PROGRAM...

Creating a Basic Chart in Excel 2007

Creating a Basic Chart in Excel 2007 A chart is a pictorial representation of the data you enter in a worksheet. Often, a chart can be a more descriptive way of representing your data. As a result, those

Models for Nurses: Quadratic Model ( ) Linear Model Dx ( ) x Models for Doctors:

The goal of this technology assignment is to graph several formulas in Excel. This assignment assumes that you using Excel 2007. The formula you will graph is a rational function formed from two polynomials,

Physics 211 E&M and Modern Physics Spring Lab #1 (to be done at home) Plotting with Excel. Good laboratory practices

NORTHERN ILLINOIS UNIVERSITY PHYSICS DEPARTMENT Physics 211 E&M and Modern Physics Spring 2018 Lab #1 (to be done at home) Lab Writeup Due: Mon/Wed/Thu/Fri, Jan. 22/24/25/26, 2018 Read Serway & Vuille:

Excel R Tips. is used for multiplication. + is used for addition. is used for subtraction. / is used for division

Excel R Tips EXCEL TIP 1: INPUTTING FORMULAS To input a formula in Excel, click on the cell you want to place your formula in, and begin your formula with an equals sign (=). There are several functions

Autodesk Inventor - Basics Tutorial Exercise 1

Autodesk Inventor - Basics Tutorial Exercise 1 Launch Inventor Professional 2015 1. Start a New part. Depending on how Inventor was installed, using this icon may get you an Inch or Metric file. To be

To graph the point (r, θ), simply go out r units along the initial ray, then rotate through the angle θ. The point (1, 5π 6

Polar Coordinates Any point in the plane can be described by the Cartesian coordinates (x, y), where x and y are measured along the corresponding axes. However, this is not the only way to represent points

Lecture 4: Transforms. Computer Graphics CMU /15-662, Fall 2016

Lecture 4: Transforms Computer Graphics CMU 15-462/15-662, Fall 2016 Brief recap from last class How to draw a triangle - Why focus on triangles, and not quads, pentagons, etc? - What was specific to triangles

3D Studio Max Lesson 1.1: A Basic Overview of 3DSMax's Main Tool Bar

3D Studio Max Lesson 1.1: A Basic Overview of 3DSMax's Main Tool Bar Introduction In this tutorial, we'll just be taking a look at parts of the environment of 3D Studio Max version 4.26, and helping you

Flow Sim. Chapter 16. Airplane. A. Enable Flow Simulation. Step 1. If necessary, open your ASSEMBLY file.

Chapter 16 Airplane Flow Sim A. Enable Flow Simulation. Step 1. If necessary, open your ASSEMBLY file. Step 2. If necessary, turn on Flow Simulation, click the flyout of Options on the Standard toolbar

Polar Coordinates. Chapter 10: Parametric Equations and Polar coordinates, Section 10.3: Polar coordinates 27 / 45

: Given any point P = (x, y) on the plane r stands for the distance from the origin (0, 0). θ stands for the angle from positive x-axis to OP. Polar coordinate: (r, θ) Chapter 10: Parametric Equations

Visual Physics Introductory Lab [Lab 0]

Your Introductory Lab will guide you through the steps necessary to utilize state-of-the-art technology to acquire and graph data of mechanics experiments. Throughout Visual Physics, you will be using

LEXT 3D Measuring LASER Microscope

LEXT 3D Measuring LASER Microscope Warning: This instrument may only be operated by those who have been trained by AAF staff and have read and signed the AAF laboratory policies. A) STARTUP 1. Computer

Department of Chemical Engineering ChE-101: Approaches to Chemical Engineering Problem Solving Excel Tutorial VIII

Department of Chemical Engineering ChE-101: Approaches to Chemical Engineering Problem Solving Excel Tutorial VIII EXCEL Basics (last updated 4/12/06 by GGB) Objectives: These tutorials are designed to

Galaxie Report Editor

Varian, Inc. 2700 Mitchell Drive Walnut Creek, CA 94598-1675/USA Galaxie Report Editor User s Guide Varian, Inc. 2008 Printed in U.S.A. 03-914949-00: Rev 6 Galaxie Report Editor i Table of Contents Introduction...

Using Graphics. Digital Camera. Auto Shapes

AutoShape Using Graphics Internet The following graphic elements are available to enhance your presentation Clip Art AutoShapes Fill effects Shadow effects 3D effects Digital Camera WordArt Digital Camera

Flow Sim. Chapter 12. F1 Car. A. Enable Flow Simulation. Step 1. If necessary, open your ASSEMBLY file.

Chapter 12 F1 Car Flow Sim A. Enable Flow Simulation. Step 1. If necessary, open your ASSEMBLY file. Step 2. If necessary, turn on Flow Simulation, click the flyout of Options on the Standard toolbar and

GETTING STARTED TABLE OF CONTENTS

Sketchup Tutorial GETTING STARTED Sketchup is a 3D modeling program that can be used to create 3D objects in a 2D environment. Whether you plan to model for 3D printing or for other purposes, Sketchup

Polar Coordinates. 2, π and ( )

Polar Coordinates Up to this point we ve dealt exclusively with the Cartesian (or Rectangular, or x-y) coordinate system. However, as we will see, this is not always the easiest coordinate system to work

Wireless Circuits and Systems Laboratory

Wireless Circuits and Systems Laboratory Procedure #9 8714 VNA Data Acquisition and Manipulation (using Microsoft Excel) Contained in this procedure: 1) Acquiring 1- and 2-port data from the HP8714 and

Microsoft Word for Report-Writing (2016 Version)

Microsoft Word for Report-Writing (2016 Version) Microsoft Word is a versatile, widely-used tool for producing presentation-quality documents. Most students are well-acquainted with the program for generating

Introduction.

Product information Image Systems AB Main office: Ågatan 40, SE-582 22 Linköping Phone +46 13 200 100, fax +46 13 200 150 info@imagesystems.se, Introduction TEMA Automotive is the world leading system

Faculty of Engineering. Irrigation & Hydraulics Department Excel Tutorial (1)

Problem Statement: Excel Tutorial (1) Create an Excel spread sheet that can calculate the flow area A, wetted perimeter P, hydraulic radius R, top water surface width B, and hydraulic depth D for the following

Section 10.1 Polar Coordinates

Section 10.1 Polar Coordinates Up until now, we have always graphed using the rectangular coordinate system (also called the Cartesian coordinate system). In this section we will learn about another system,

Microsoft Office Word 2016 for Mac

Microsoft Office Word 2016 for Mac Working with Graphics University Information Technology Services Learning Technologies, Training & Audiovisual Outreach Copyright 2016 KSU Division of University Information

Creating and Modifying Charts

Creating and Modifying Charts Introduction When you re ready to share data with others, a worksheet might not be the most effective way to present the information. A page full of numbers, even if formatted

99 Shapes and Shape Manager

99 Shapes and Shape Manager Copyright Bentley Systems. Introduction Bentley Rebar asks the user to place a bar by the number of legs, rather than input of the code shape as some other programs do. This

Product information. Hi-Tech Electronics Pte Ltd

Product information Introduction TEMA Motion is the world leading software for advanced motion analysis. Starting with digital image sequences the operator uses TEMA Motion to track objects in images,

Math 231E, Lecture 34. Polar Coordinates and Polar Parametric Equations

Math 231E, Lecture 34. Polar Coordinates and Polar Parametric Equations 1 Definition of polar coordinates Let us first recall the definition of Cartesian coordinates: to each point in the plane we can

Scientific Graphing in Excel 2007

Scientific Graphing in Excel 2007 When you start Excel, you will see the screen below. Various parts of the display are labelled in red, with arrows, to define the terms used in the remainder of this overview.

Select the Points You ll Use. Tech Assignment: Find a Quadratic Function for College Costs

In this technology assignment, you will find a quadratic function that passes through three of the points on each of the scatter plots you created in an earlier technology assignment. You will need the

Technology Assignment: Limits at Infinity

The goal of this technology assignment is to find the location of the horizontal asymptote for your model from Technology Assignment: Rational Model. You will produce a graph similar to the one below.

Reflections, Translations, and Dilations

Reflections, Translations, and Dilations Step 1: Graph and label the following points on your coordinate plane. A (2,2) B (2,8) C (8,8) D (8,2) Step 2: Step 3: Connect the dots in alphabetical order to

Flow Sim. Chapter 16. Airplane. A. Add-In. Step 1. If necessary, open your ASSEMBLY file.

Chapter 16 A. Add-In. Step 1. If necessary, open your ASSEMBLY file. Airplane Flow Sim Step 2. Click Tools Menu > Add-Ins. Step 3. In the dialog box, scroll down to Flow Simulation and place a check in

Two-Dimensional Projectile Motion

Two-Dimensional Projectile Motion I. Introduction. This experiment involves the study of motion using a CCD video camera in which a sequence of video frames (a movie ) is recorded onto computer disk and

Learning Photoshop Elements Step-by-step Lesson Two

Learning Photoshop Elements Step-by-step Lesson Two Layers and Shapes Overview The power and flexibility of Photoshop lies in its layers. Before students get started using Elements in integrated projects,

DASYLab Techniques. Usage- Chart Recorder, Y/t Chart, X/Y Chart. Using Cursors in the Display Modules

DASYLab Techniques Using Cursors in the Display Modules Updated to include DASYLab 2016 features The DASYLab graphical display modules render the data into a graphical chart display in the following DASYLab

UNIVERSITY OF SHEFFIELD SYMPODIUM USER GUIDE (2011)

UNIVERSITY OF SHEFFIELD SYMPODIUM USER GUIDE (2011) Index Overview... 1 Switching On... 2 Using Pen Tool Buttons... 3 Using Sympodium Pen as a Mouse... 3 Using Sympodium Pen to Write... 4 Using Floating

Figure 1: My Blocks are blue in color, and they appear in the Custom palette in NXT-G.

What is a My Block? The Common and Complete palettes in the NXT-G programming system contain all of the built-in blocks that you can use to create an NXT program. The NXT-G software also allows you to

Chemistry 1A Graphing Tutorial CSUS Department of Chemistry

Chemistry 1A Graphing Tutorial CSUS Department of Chemistry Please go to the Lab webpage to download your own copy for reference. 1 When you open Microsoft Excel 2003, you will see a blank worksheet: Enter

Hands-on Lab: LabVIEW Angle Sensor

Hands-on Lab: LabVIEW Angle Sensor Third party vendors like Hi Technic, offer a range of sensors. One example is the angle sensor, and LabVIEW LEGO Mindstorms has a control block for it. This lab will

GCC vinyl cutter, cutting plotter for sign making

Plotter Setup In "Plotter Setup," you can choose "Plotter List," "Environment," "Pen," and so on. [Plotter list] In this area, you can choose the machine type and set some basic information for your plotter

Flair Geometry Editor Part II. FLUKA Beginner s Course

Flair Geometry Editor Part II FLUKA Beginner s Course Listbox - Objects Lists the type/name of bodies, regions, objects Text coloring: RED Error in the card description Magenta Visible body/object Orange

Polar Coordinates

Polar Coordinates 7-7-2 Polar coordinates are an alternative to rectangular coordinates for referring to points in the plane. A point in the plane has polar coordinates r,θ). r is roughly) the distance

A Simple First-Model Using the Berkeley-Madonna Program

A Simple First-Model Using the Berkeley-Madonna Program For this introduction, we will be creating a model of a simple system with two compartments analogous to containers of a liquid which can flow between

Creating T-Spline Forms

1 / 28 Goals 1. Create a T-Spline Primitive Form 2. Create a T-Spline Revolve Form 3. Create a T-Spline Sweep Form 4. Create a T-Spline Loft Form 2 / 28 Instructions Step 1: Go to the Sculpt workspace

Tracker Help. To start using Tracker, see getting started.

Tracker Help Tracker is a free video analysis and modeling tool built on the Open Source Physics (OSP) Java framework. Features include object tracking with position, velocity and acceleration overlays

Microsoft Office Word 2013

Microsoft Office Word 2013 Working with Graphics University Information Technology Services Training, Outreach & Learning Technologies Copyright 2014 KSU Department of University Information Technology

Steady Flow: Lid-Driven Cavity Flow

STAR-CCM+ User Guide Steady Flow: Lid-Driven Cavity Flow 2 Steady Flow: Lid-Driven Cavity Flow This tutorial demonstrates the performance of STAR-CCM+ in solving a traditional square lid-driven cavity

Video-Based Motion Analysis

Video-Based Motion Analysis Bruce McKay Saint Ignatius College Introduction This session will cover the basics of recording and producing video clips for analysis. Video analysis provides the opportunity

Shade tutorial: Shoes for Poser.

Shade tutorial: Shoes for Poser www.oscillator.se/3d Notes Welcome to the Shade tutorial: Shoes for Poser. This is my first tutorial for Shade. I was inspired by the friendly and generous people at Shader

BC is parallel to DE. AB is twice as long as BD. AD = 36 cm and AC = 27 cm. (a) Work out the length of AB. AB =... cm (2 marks)

shape and space 2 higher Question 1 BC is parallel to DE. AB is twice as long as BD. AD = 36 cm and AC = 27 cm. (a) Work out the length of AB. (b) Work out the length of AE. AB =... cm AE =... cm Question

form are graphed in Cartesian coordinates, and are graphed in Cartesian coordinates.

Plot 3D Introduction Plot 3D graphs objects in three dimensions. It has five basic modes: 1. Cartesian mode, where surfaces defined by equations of the form are graphed in Cartesian coordinates, 2. cylindrical

Microsoft Office Word 2016 for Windows

Microsoft Office Word 2016 for Windows Working with Graphics University Information Technology Services Learning Technologies, Training & Audiovisual Outreach Copyright 2016 KSU Division of University

DesignCAD 3D Max 22.1 Release Notes

DesignCAD 3D Max 22.1 Release Notes December 2012 This update to DesignCAD offers the following improvements and fixes: BasicCAD: We have added some new Query/Change parameters to address missing functionality:

Polar Coordinates. Chapter 10: Parametric Equations and Polar coordinates, Section 10.3: Polar coordinates 28 / 46

Polar Coordinates Polar Coordinates: Given any point P = (x, y) on the plane r stands for the distance from the origin (0, 0). θ stands for the angle from positive x-axis to OP. Polar coordinate: (r, θ)

Magic-E-Board. User Manual

Magic-E-Board Magic-E-Board Magic-E-Board...2 1) Included Parts and Optional Accessories...4 1.1) Package Checklist...4 1.2) Optional Accessories...4 2) Magic-E-Board Software Installation...5 3) Magic-E-Board

Metrics Tutorial. Table of Contents. 1. Introduction

Metrics Tutorial Table of Contents 1. Introduction 2. The Set-Up Editor 3. The Project File Manager 4. Data Windows 5. Plot Windows 6. Exporting and Importing Data 7. Linking Metrics and Excel 1. Introduction

PARAMETRIC EQUATIONS AND POLAR COORDINATES

10 PARAMETRIC EQUATIONS AND POLAR COORDINATES PARAMETRIC EQUATIONS & POLAR COORDINATES A coordinate system represents a point in the plane by an ordered pair of numbers called coordinates. PARAMETRIC EQUATIONS

SizeStrain For XRD profile fitting and Warren-Averbach analysis

SizeStrain For XRD profile fitting and Warren-Averbach analysis I. How to use MDI SizeStrain? 1. Start MDI SizeStrain, use menu File -> Open Pattern for new Analysis to open an XRD pattern file from Program

Warning : This document is not printer friendly and might take a long time to print. more exam papers at : more exam papers at : more exam papers at : more exam papers at : more exam papers at : more

The Graph Tab. Create a Graph Format a Graph

The Graph Tab Create a Graph Format a Graph Create a Graph To create a Graph, you must first have at least one group and at least one measured column that you wish to compare. The first group will make

Core practical 10: Use ICT to analyse collisions between small spheres

Core practical 10 Teacher sheet Core practical 10: between small To investigate the conservation of momentum in two dimensions To determine whether a collision is elastic Specification links Procedure

Appendix E: Software

Appendix E: Software Video Analysis of Motion Analyzing pictures (movies or videos) is a powerful tool for understanding how objects move. Like most forms of data, video is most easily analyzed using a

Design a Simple Fan in 123D Design

Design a Simple Fan in 123D Design Learn to use 123D Design to make and print this simple fan. 123D Design is a free, powerful, yet simple 3D creation and editing tool. It allows you to design and build

In the end, your design should look similiar as shown below skeng Steelwork 3skeng by SHK Engineering GmbH & Co. KG 1

Learn to use (4) 3skeng Steelwork (ver.1.0) This document contains all scene texts of the SketchUp file in case you have problems to fit the text on your screen. Scene Learn to use Steelwork How-to use

2nd GRADE-Math Year at a Glance

2nd Grade - Math Year at a Glance: 2017-2018 Chariton Community School District Operations and Algebraic Thinking Represent and solve problems Number and Operations in Base Ten Use place value understanding

Flair Geometry Editor Part II. FLUKA Beginner s Course

Flair Geometry Editor Part II FLUKA Beginner s Course Starting the Geometry Editor Click on icon or from Menu View Geometry Editor or with [F4] shortcut Either start flair with option -g 2 Geometry editor

A 10-minute introduction to. SynRad+ A test-particle Monte Carlo simulator for synchrotron radiation

A 10-minute introduction to SynRad+ A test-particle Monte Carlo simulator for synchrotron radiation 1 The basics First, let s learn the SynRad+ terminology and the interface in a few slides. Or, if you

Adjust model for 3D Printing. Direct modeling tools 13,0600,1489,1616(SP6)

Adjust model for 3D Printing Direct modeling tools 13,0600,1489,1616(SP6) Sometimes, the model needs to be prepared or adapted for printing. Adding material, change of a draft angles are an example. In

Introduction to Google SketchUp

Introduction to Google SketchUp When initially opening SketchUp, it will be useful to select the Google Earth Modelling Meters option from the initial menu. If this menu doesn t appear, the same option

Flow Sim. Chapter 14 P-51. A. Set Up. B. Create Flow Simulation Project. Step 1. Click Flow Simulation. SolidWorks 10 Flow Sim P-51 Page 14-1

Chapter 14 A. Set Up. P-51 Flow Sim Step 1. If necessary, open your ASSEMBLY file. Step 2. Click Tools Menu > Add-Ins. Step 3. In the dialog box, scroll down to Flow Simulation and place a check in the

PhysicsAndMathsTutor.com

PhysicsAndMathsTutor.com January 2007 2. Figure 1 A a θ α A uniform solid right circular cone has base radius a and semi-vertical angle α, where 1 tanα = 3. The cone is freely suspended by a string attached

GETTING STARTED WITH SKETCHUP

MENUS TOOLBARS GETTING STARTED WITH SKETCHUP When opening a new document the image will likely look like this. Familiarize yourself with the options available in the program. Additional toolbars can be

CAMI Education links: Maths NQF Level 2

- 1 - CONTENT 1.1 Computational tools, estimation and approximations 1.2 Numbers MATHEMATICS - NQF Level 2 LEARNING OUTCOME Scientific calculator - addition - subtraction - multiplication - division -

ezimagex2 User s Guide Version 1.0

ezimagex2 User s Guide Version 1.0 Copyright and Trademark Information The products described in this document are copyrighted works of AVEN, Inc. 2015 AVEN, Inc. 4595 Platt Rd Ann Arbor, MI 48108 All