Cosmos- Solidworks Presentation. Presentation Agenda. Introduction to FEA. Introduction to Cosmos. Example #1 (Basic Cosmos Operation)
|
|
- Ross McDaniel
- 6 years ago
- Views:
Transcription
1 Cosmos- Solidworks Presentation Presentation Agenda Created by: Paul Terstappen Jon Vokey Andrew Northcott Mark Howell -Introduction to FEA and Cosmos - -shows the basic uses of the cosmos application in Solidworks - -shows the optimization feature that can be used in the Cosmos application in Solidworks -Advanced applications available in the various CosmosWorks packages -Sample Videos of the advanced applications -Key points recapped Introduction to FEA Introduction to Cosmos -First developed in 1943 and is based on an energy principle such as minimum total potential energy. -With the use of Equations of equilibrium, along with the application of the appropriate physical considerations being applied to each element, a system of equations is generated. -Is an approximate answer, but increasing the elements increases the accuracy. Cosmos -CosmosWorks is the software FEA package that is integrated with Solidworks. The CosmosWorks package is extremely user friendly and works very well. -This package allows the user to improve product quality by exposing the areas that are prone to weakness and failure. Trimming excess material is also a task that the Cosmos package can handle. -Advancing along with technology. Introduction to Cosmos con t (Basic Cosmos Operation) Key features in CosmosWorks -Extremely simple to compare alternative designs -Ability to optimize the design based on criteria and given circumstances -The ability to study the interaction between different assembly components -The ability to study real world situations and conditions -The ability to interpret the results with powerful visualization tools -The ability to find high stress areas, calculate safety factors and find max loads -Export results data into useable forms such as HTML, Excel ect -The ability to study the effects of temperature on the object -Study various simulations such as drops, repeated cycles, fatigue, loads ect.. -For this are using simple handle with a downward force on the object -We will run thru the basic Cosmos commands including setting up materials, restraints and loads -Graphics of the results will be shown to help with the analysis 1
2 1) Select the Cosmos icon from the toolbars 2) Once the Cosmos menu loads select the options tab 1) Select the system of units you want to use in this example choose SI 2) Once the units are selected select a location to save them in 3) Click next to go 1) The material menu comes up and allows you to select the material you want. 2) In this example we choose a steel and we selected AISI 1020 steel 3) Click next to go 1) Restraint tab appears 2) Click next to go enter restraints 1) Name the restraint in the text box 2) Click in the red box and go to the graphics area to select the location of the restraints 3) For this example the rack is to be mounted to a wall so face 1 and face 2 are restrained 4) Click next to go 1) The restraint that was just created now appears in the restraints menu 2) Now we are given the option to add, edit or delete restraints. 3) For this example we leave it alone as we only have the one restraint 4) Click next to go 2
3 1) Load tab appears 2) Click next to go enter loads 1) Now you are asked to select the type of loading force or pressure we chose a force 3) Click next to next menu 1) Name the load in the text box 2) Click in the red box and go to the graphics area to select the location of the loads 3) For this example the rack is to have a downward force applied on it, so a face 1 is selected 4) Click next to go 1) The first option given is the load direction for this chose to normal the force to the top plane 2) The second option given is to select the force value for the load, for this select 1000 N 3) Two more options are given, we select flip direction to have the force act down 4) Click next 1) The load that was just created now appears in the load menu 2) Now we are given the option to add, edit or delete loads. 3) For this leave it alone as we only have the one load to apply 4) Click next to go 1) The analysis menu now shows up 2) We are given the option analysis with the default settings or to change the settings. 3) For this will analyze with the default settings 4) Click next to prompt the next menu 3
4 Example 1) The analysis menu shows up 2) We are asked if we want to run the analysis 3) Hit the run button to begin the analysis, this process may take a few minuets. 4) Wait for the analysis to finish 1) The analysis is complete and the lowest factor of safety found in our design is shown our safety factor is This number can be further used in analysis to help determine max loads ect. 3) Click next to optimize tab 1) The optimize tab gives us the option to optimize the design for this will select NO, the second example will deal with optimization 2) Select No and click next to next tab 1) The results tab comes up displaying numerous options for displaying the results obtained 2) We will show you the stress distribution model and the displacement model to show the areas of concern on this model 3) Once the option is select hit next to generate the results 1) This display shows the stress distribution in the part, there are options for animations as well which we will show at the end of the example 1) This display shows the displacement distribution in the part, there are options for animations as well 4
5 (Optimization) Stress Distribution in the Element Animation -For this are using the part the we designed that would help show the optimization function of CosmosWorks -We will run thru the basic Cosmos commands again however this time we will be optimizing the design based on our loads and restraints. -Un needed material will be removed where allowed. 1) Select the Cosmos icon from the toolbars 2) Once the Cosmos menu loads select the options tab 1) The material menu comes up and allows you to select the material you want. 2) In this example we choose a aluminum and we selected 6061 alloy 3) Click next to go 1) Name the restraint in the text box 2) Click in the red box and go to the graphics area to select the location of the restraints 3) For this example the part is to be mounted to a flat surface so the 4 holes along with the base are restrained 4) Click next to go 1) The first option given is the load direction for this chose to normal the force to the top plane 2) The second option given is to select the force value for the load, for this select 100 N 3) Two more options are given, we select flip direction to have the force act down 4) Click next 5
6 1) The analysis menu shows up 2) We are asked if we want to run the analysis 3) Hit the run button to begin the analysis, this process may take a few minuets. 4) Wait for the analysis to finish, the analysis needs to be completed for the optimization to work 1) The analysis is complete and the lowest factor of safety found in our design is shown our safety factor is This number will be used to help with the optimization 3) Click next to optimize tab 1) The optimize tab gives us the option to optimize the design for this will select YES 2) Select YES and click next to next tab 1) The first menu that appears with the optimization tab allows us to select the criteria to use for optimizing we will use the safety factor set at a value of 1 as the criteria that the part can be optimized to 3) Click next to move on 1) The second menu that appears with the optimization tab allows us to select the dimension we want to alter for optimizing we will use the diameter of the extension shaft as the varying dimension 3) Set upper and lower limits for dimensions 4) Click next to move on 1) With all the criteria and restrictions in place we can click the optimize button to begin the optimization 2) This step may take some time depending on the computer speed ect 6
7 1) Once the optimization is completed the results are shown we can trim the weight from kg to a savings of 0.22% material This trimming in the shaft still maintains a safety factor of 1 3) The option of an animation is given 1) All the analysis results are now displayed for the newly adjusted arm diameter 2) This shows the stress distribution in the part, not letting the safety factor below 1 at any point. In this case the high stress point is shown in red. 3) An animation option is given again to help display the results Advanced Applications of Cosmos Stress Distribution in the Element Animation Cosmos is available in various packages -The basic package is named CosmosWorks Designer, this is the package that is included on most solidworks packages it includes the basic elements as we demonstrated in the 2 examples -The middle of the road package is named CosmosWorks Pro, this package begins to include the effects of temperature changes, natural frequencies, buckling, drop tests and cycle loading. These advanced options are a huge asset in the design process. -The most advanced package is named CosmosWorks Advanced Pro, this allows the user to analyze non linear materials, layers within composites, and allows analyze of more advance parts and assemblies Advanced Cosmos Applications - We have come across a few animations displaying the results of some of the more advanced Cosmos Applications that we are not able to perform our self as we do not have the Pro or advanced pro Cosmos Add in s - These animations include drop test, temperature effect, fatigue loading, frequency, optimization and advanced stress analysis Drop Test Video -The flooring surface that the phone is dropped on can be altered to act as various surfaces -All the parts in the assembly will deform together showing how the assembly will interact amongst it self -This simulates your part being dropped and helps test strength and durability of the part or assembly 7
8 Fatigue Test Video -Can obtain and display life expectances for parts in an assembly -Makes suggestions on what parts need to be altered to extend the overall life of the assembly -Simulates the movement of the parts in a complete assembly, changes to materials ect.. Can be made to alter the life of the part Thermal Test Video -Evaluates temperature of mechanical parts which are greatly effected by temperature variations -Can analyze convection, conduction and radiation Frequencies Test Video -Evaluates natural frequencies, buckling loads and mode shapes -This is a topic that is normally over looked in design -Can analyze isotropic and orthotropic behavior -Measure in-plane stiffness -Analyze take into consideration all contributing factors Optimization Test Video -Minimizes material use and overall weight -Users can automatically optimize the shape of their design based on various analysis -Users can set numerous constraints such as force, mass, dimension, pressure Key points/conclusion Stress Test Video -Analyze can be done in either part or assembly work spaces -User can select from numerous material properties, restraints, loads and many other constraints -Cosmos gives numerous graphical display options to help convey the results obtained -Finite Element Analysis software can be used to in many applications to simulate the reaction of an element to a number of applications. -Aids in producing stiffness and strength visualization while minimizing things like weight, materials, and costs -Allows a detailed image of where structures bend or twist, and indicates the distribution of stresses and displacements. -Allows entire designs to be constructed, refined, and optimized before the design is manufactured. 8
9 Questions 9
SDC. Engineering Analysis with COSMOSWorks. Paul M. Kurowski Ph.D., P.Eng. SolidWorks 2003 / COSMOSWorks 2003
Engineering Analysis with COSMOSWorks SolidWorks 2003 / COSMOSWorks 2003 Paul M. Kurowski Ph.D., P.Eng. SDC PUBLICATIONS Design Generator, Inc. Schroff Development Corporation www.schroff.com www.schroff-europe.com
More informationSolidWorks. An Overview of SolidWorks and Its Associated Analysis Programs
An Overview of SolidWorks and Its Associated Analysis Programs prepared by Prof. D. Xue University of Calgary SolidWorks - a solid modeling CAD tool. COSMOSWorks - a design analysis system fully integrated
More informationThe part to be analyzed is the bracket from the tutorial of Chapter 3.
Introduction to Solid Modeling Using SolidWorks 2007 COSMOSWorks Tutorial Page 1 In this tutorial, we will use the COSMOSWorks finite element analysis (FEA) program to analyze the response of a component
More informationQuarter Symmetry Tank Stress (Draft 4 Oct 24 06)
Quarter Symmetry Tank Stress (Draft 4 Oct 24 06) Introduction You need to carry out the stress analysis of an outdoor water tank. Since it has quarter symmetry you start by building only one-fourth of
More information2: Static analysis of a plate
2: Static analysis of a plate Topics covered Project description Using SolidWorks Simulation interface Linear static analysis with solid elements Finding reaction forces Controlling discretization errors
More informationSIMULATION CAPABILITIES IN CREO
SIMULATION CAPABILITIES IN CREO Enhance Your Product Design with Simulation & Using digital prototypes to understand how your designs perform in real-world conditions is vital to your product development
More informationMSC.visualNastran Desktop FEA Exercise Workbook. Pin and Bracket Assembly: Vibration Simulation in 4D
MSC.visualNastran Desktop FEA Exercise Workbook Pin and Bracket Assembly: Vibration Simulation in 4D WS24-2 Objectives This exercise is design to introduce vibration analysis in visualnastran Desktop.
More informationIntroduction to Computer Aided Engineering: Solidworks and Cosmosworks using CosmosXpress
Introduction to Computer Aided Engineering: Solidworks and Cosmosworks using CosmosXpress Open SolidWorks Tutorial written by Jerry Dutreuil Professor Frank Fisher Stevens Institute of Technology Last
More informationABOUT FEATURES OF SIMULATION MODULE IN SOLIDWORKS
ABOUT FEATURES OF SIMULATION MODULE IN SOLIDWORKS prof.phd.eng. Cătălin IANCU Engineering and Sustainable Development Faculty, C-tin Brâncuşi Univ. of Tg-Jiu, ciancu@utgjiu.ro Abstract: In this paper are
More informationSIMULATION CAPABILITIES IN CREO. Enhance Your Product Design with Simulation & Analysis
SIMULATION CAPABILITIES IN CREO Enhance Your Product Design with Simulation & Using digital prototypes to understand how your designs perform in real-world conditions is vital to your product development
More informationIJMH - International Journal of Management and Humanities ISSN:
EXPERIMENTAL STRESS ANALYSIS SPUR GEAR USING ANSYS SOFTWARE T.VADIVELU 1 (Department of Mechanical Engineering, JNTU KAKINADA, Kodad, India, vadimay28@gmail.com) Abstract Spur Gear is one of the most important
More informationMSC.visualNastran Desktop FEA Exercise Workbook. Foot Support
MSC.visualNastran Desktop FEA Exercise Workbook Foot Support WS3.1-2 Objectives This exercise is design to introduce vibration analysis in visualnastran Desktop. You will determine the natural frequencies
More informationLearning Module 8 Shape Optimization
Learning Module 8 Shape Optimization What is a Learning Module? Title Page Guide A Learning Module (LM) is a structured, concise, and self-sufficient learning resource. An LM provides the learner with
More informationCATIA V5 Analysis. CATIA V5 Training Foils. CATIA V5 Analysis. Copyright DASSAULT SYSTEMES 1. Student Notes:
CATIA V5 Training Foils CATIA V5 Analysis Version 5 Release 19 January 2009 EDU_CAT_EN_V5A_FF_V5R19 1 Lesson 1: Introduction to Finite Element Analysis About this Course Introduction CATIA is a robust
More informationSOLIDWORKS SIMULATION
SOLIDWORKS SIMULATION Innovation is about taking chances, not taking risks Scootchi by Curventa Designworks LTD What if? is the question that fuels innovation. SolidWorks Simulation software takes the
More informationOptimizing the Utility Scale Solar Megahelion Drive End-Cap (Imperial Units)
Autodesk Inventor Tutorial Exercise Optimizing the Utility Scale Solar Megahelion Drive End-Cap www.autodesk.com/sustainabilityworkshop Contents OPTIMIZING THE USS SOLAR TRACKING END CAP... 3 OBJECTIVE...
More informationCHAPTER 8 FINITE ELEMENT ANALYSIS
If you have any questions about this tutorial, feel free to contact Wenjin Tao (w.tao@mst.edu). CHAPTER 8 FINITE ELEMENT ANALYSIS Finite Element Analysis (FEA) is a practical application of the Finite
More informationFEA BENDING, TORSION, TENSION, and SHEAR TUTORIAL in CATIA
1 FEA BENDING, TORSION, TENSION, and SHEAR TUTORIAL in CATIA This tutorial shows the basics of a solid bending, torsional, tension, and shear FEA (Finite Elemental Analysis) model in CATIA. Torsion - page
More informationModule 1: Introduction to Finite Element Analysis. Lecture 4: Steps in Finite Element Analysis
25 Module 1: Introduction to Finite Element Analysis Lecture 4: Steps in Finite Element Analysis 1.4.1 Loading Conditions There are multiple loading conditions which may be applied to a system. The load
More informationSimWise. 3D Dynamic Motion, and Stress Analysis. integrated with Alibre Design
SimWise 3D Dynamic Motion, and Stress Analysis integrated with Alibre Design SimWise 4D for Alibre Integrated Motion Simulation and Stress Analysis SimWise 4D is a software tool that allows the functional
More informationRevised Sheet Metal Simulation, J.E. Akin, Rice University
Revised Sheet Metal Simulation, J.E. Akin, Rice University A SolidWorks simulation tutorial is just intended to illustrate where to find various icons that you would need in a real engineering analysis.
More informationRevision of the SolidWorks Variable Pressure Simulation Tutorial J.E. Akin, Rice University, Mechanical Engineering. Introduction
Revision of the SolidWorks Variable Pressure Simulation Tutorial J.E. Akin, Rice University, Mechanical Engineering Introduction A SolidWorks simulation tutorial is just intended to illustrate where to
More informationKISSsoft 03/2013 Tutorial 5
KISSsoft 03/2013 Tutorial 5 Shaft analysis KISSsoft AG Rosengartenstrasse 4 8608 Bubikon Switzerland Tel: +41 55 254 20 50 Fax: +41 55 254 20 51 info@kisssoft.ag www.kisssoft.ag Contents 1 Starting KISSsoft...
More informationIntroduction To Finite Element Analysis
Creating a Part In this part of the tutorial we will introduce you to some basic modelling concepts. If you are already familiar with modelling in Pro Engineer you will find this section very easy. Before
More informationAn Overview of Computer Aided Design and Finite Element Analysis
An Overview of Computer Aided Design and Finite Element Analysis by James Doane, PhD, PE Contents 1.0 Course Overview... 4 2.0 General Concepts... 4 2.1 What is Computer Aided Design... 4 2.1.1 2D verses
More informationEngineering Analysis with
Engineering Analysis with SolidWorks Simulation 2013 Paul M. Kurowski SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites
More informationEngineering Analysis with SolidWorks Simulation 2012
Engineering Analysis with SolidWorks Simulation 2012 Paul M. Kurowski SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites
More informationTutorial 1: Welded Frame - Problem Description
Tutorial 1: Welded Frame - Problem Description Introduction In this first tutorial, we will analyse a simple frame: firstly as a welded frame, and secondly as a pin jointed truss. In each case, we will
More informationComputer Life (CPL) ISSN: Finite Element Analysis of Bearing Box on SolidWorks
Computer Life (CPL) ISSN: 1819-4818 Delivering Quality Science to the World Finite Element Analysis of Bearing Box on SolidWorks Chenling Zheng 1, a, Hang Li 1, b and Jianyong Li 1, c 1 Shandong University
More informationEngineering Effects of Boundary Conditions (Fixtures and Temperatures) J.E. Akin, Rice University, Mechanical Engineering
Engineering Effects of Boundary Conditions (Fixtures and Temperatures) J.E. Akin, Rice University, Mechanical Engineering Here SolidWorks stress simulation tutorials will be re-visited to show how they
More informationSet No. 1 IV B.Tech. I Semester Regular Examinations, November 2010 FINITE ELEMENT METHODS (Mechanical Engineering) Time: 3 Hours Max Marks: 80 Answer any FIVE Questions All Questions carry equal marks
More informationAbout the Author. Acknowledgements
About the Author Dr. Paul Kurowski obtained his MSc and PhD in Applied Mechanics from Warsaw Technical University. He completed postdoctoral work at Kyoto University. Dr. Kurowski is an Assistant Professor
More information16 SW Simulation design resources
16 SW Simulation design resources 16.1 Introduction This is simply a restatement of the SW Simulation online design scenarios tutorial with a little more visual detail supplied on the various menu picks
More informationABOUT OPTIMIZATION DESIGN STUDY ON SOLIDWORKS
ABOUT OPTIMIZATION DESIGN STUDY ON SOLIDWORKS prof.phd.eng. Cătălin IANCU Engineering and Sustainable Development Faculty, C-tin Brâncuşi Univ. of Tg-Jiu, ciancu@utgjiu.ro Abstract: In this paper are presented
More informationNew Capabilities in Project Hydra for Autodesk Simulation Mechanical
New Capabilities in Project Hydra for Autodesk Simulation Mechanical Sualp Ozel, PE. Autodesk SM2447-L In this hands-on lab, we will go through several exercises and cover several new capabilities included
More informationSolidWorks 2013 Part II - Advanced Techniques
SolidWorks 2013 Part II - Advanced Techniques Parts, Surfaces, Sheet Metal, SimulationXpress, Top-Down Assemblies, Core and Cavity Molds Paul Tran CSWE, CSWI Supplemental Files SDC PUBLICATIONS Schroff
More informationIntroduction to Engineering Analysis
Chapter 1 Introduction to Engineering Analysis This chapter introduces you to the Stress Analysis and Dynamic Simulation environments. You learn how digital prototyping can be used to simulate your designs
More informationSolidWorks 2014 Part II - Advanced Techniques
SolidWorks 2014 Part II - Advanced Techniques Parts, Surfaces, Sheet Metal, SimulationXpress, Top-Down Assemblies, Core and Cavity Molds Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices.
More informationEngineering Optimization
Engineering Optimization Most engineering design involves using optimization software which minimizes or maximizes a merit or objective function while satisfying functional constraints (such as stress
More informationGenerative Part Structural Analysis Fundamentals
CATIA V5 Training Foils Generative Part Structural Analysis Fundamentals Version 5 Release 19 September 2008 EDU_CAT_EN_GPF_FI_V5R19 About this course Objectives of the course Upon completion of this course
More informationCOSMOS. Vehicle Suspension Analysis ---- SolidWorks Corporation. Introduction 1. Role of vehicle suspension 2. Motion analysis 2
---- WHITE PAPER Vehicle Suspension Analysis CONTENTS Introduction 1 Role of vehicle suspension 2 Motion analysis 2 Motion analysis using COSMOSMotion 3 Real-life example 4-5 Exporting loads to COSMOSWorks
More informationEngineering Analysis
Engineering Analysis with SOLIDWORKS Simulation 2018 Paul M. Kurowski SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
More informationLesson 6: Assembly Structural Analysis
Lesson 6: Assembly Structural Analysis In this lesson you will learn different approaches to analyze the assembly using assembly analysis connection properties between assembly components. In addition
More informationCould a skydiver, whose parachute failed to open, hit one side of a playground seesaw and send
Solidworks Shawna Wise 1. INTRODUCTION Could a skydiver, whose parachute failed to open, hit one side of a playground seesaw and send a small girl, sitting on the other side, flying seven stories high
More informationTUTORIAL 2. OBJECTIVE: Use SolidWorks/COSMOS to model and analyze a cattle gate bracket that is subjected to a force of 100,000 lbs.
TUTORIAL 2 OBJECTIVE: Use SolidWorks/COSMOS to model and analyze a cattle gate bracket that is subjected to a force of 100,000 lbs. GETTING STARTED: 1. Open the SolidWorks program. 2. Open a new part file.
More informationCrane Hook Design and Analysis
Crane Hook Design and Analysis G Bhagyaraj 1, K Suryaprakash 2, K Subba Rao 3 1M.Tech. CAD/CAM, Godavari Institute of Engineering and Technology, Rajahmundry 2Associate Professor, Godavari Institute of
More informationDMU Engineering Analysis Review
Page 1 DMU Engineering Analysis Review Preface Using This Guide Where to Find More Information Conventions What's New? Getting Started Inserting a CATAnalysis Document Using DMU Space Analysis From CATAnalysis
More informationAbout the Author. Acknowledgements
About the Author Dr. Paul Kurowski obtained his M.Sc. and Ph.D. in Applied Mechanics from Warsaw Technical University. He completed postdoctoral work at Kyoto University. Dr. Kurowski is an Assistant Professor
More informationSimWise 4D. Integrated Motion and Stress Analysis
SimWise 4D Integrated Motion and Stress Analysis SimWise 4D Integrated Motion Simulation and Stress Analysis SimWise 4D is a software tool that allows the functional performance of mechanical parts and
More informationFirst Steps - Ball Valve Design
COSMOSFloWorks 2004 Tutorial 1 First Steps - Ball Valve Design This First Steps tutorial covers the flow of water through a ball valve assembly before and after some design changes. The objective is to
More informationSOLIDWORKS Simulation
SOLIDWORKS Simulation Length: 3 days Prerequisite: SOLIDWORKS Essentials Description: SOLIDWORKS Simulation is designed to make SOLIDWORKS users more productive with the SOLIDWORKS Simulation Bundle. This
More informationTUTORIAL 7: Stress Concentrations and Elastic-Plastic (Yielding) Material Behavior Initial Project Space Setup Static Structural ANSYS ZX Plane
TUTORIAL 7: Stress Concentrations and Elastic-Plastic (Yielding) Material Behavior In this tutorial you will learn how to recognize and deal with a common modeling issues involving stress concentrations
More informationABAQUS for CATIA V5 Tutorials
ABAQUS for CATIA V5 Tutorials AFC V2.5 Nader G. Zamani University of Windsor Shuvra Das University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com ABAQUS for CATIA V5,
More information#SEU Welcome! Solid Edge University 2016
#SEU 2016 Welcome! Solid Edge University 2016 Realize innovation. Fundamental Simulation Capabilities in Solid Edge Craig Ruchti, Solid Edge Global Technical Business Development Realize innovation. Fundamental
More informationDMU Engineering Analysis Review
DMU Engineering Analysis Review Overview Conventions What's New? Getting Started Entering DMU Engineering Analysis Review Workbench Generating an Image Visualizing Extrema Generating a Basic Analysis Report
More information3D SolidWorks Tutorial
ROCHESTER INSTITUTE OF TECHNOLOGY MICROELECTRONIC ENGINEERING 3D SolidWorks Tutorial Dr. Lynn Fuller webpage: http://people.rit.edu/lffeee Electrical and Microelectronic Engineering Rochester Institute
More informationAbaqus CAE Tutorial 6: Contact Problem
ENGI 7706/7934: Finite Element Analysis Abaqus CAE Tutorial 6: Contact Problem Problem Description In this problem, a segment of an electrical contact switch (steel) is modeled by displacing the upper
More informationTOPOLOGY OPTIMIZATION OF WING RIBS IN CESSNA CITATION
TOPOLOGY OPTIMIZATION OF WING RIBS IN CESSNA CITATION [1],Sathiyavani S [2], Arun K K [3] 1,2 student, 3 Assistant professor Kumaraguru College of technology, Coimbatore Abstract Structural design optimization
More informationVD - Design Validation
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2017 295 - EEBE - Barcelona East School of Engineering 717 - EGE - Department of Engineering Presentation BACHELOR'S DEGREE IN ELECTRICAL
More informationANSYS Element. elearning. Peter Barrett October CAE Associates Inc. and ANSYS Inc. All rights reserved.
ANSYS Element Selection elearning Peter Barrett October 2012 2012 CAE Associates Inc. and ANSYS Inc. All rights reserved. ANSYS Element Selection What is the best element type(s) for my analysis? Best
More informationmachine design, Vol.9(2017) No.1, ISSN pp
machine design, Vol.9(2017) No.1, ISSN 1821-1259 pp. 29-34 Research paper DYNAMIC ANALYSIS AND PARAMETRIC OPTIMISATION OF THE CONNECTING ROD USING AUTODESK INVENTOR Vasile George CIOATĂ 1, * - Imre KISS
More informationDESIGN & ANALYSIS OF CONNECTING ROD OF FORMING AND CUTTING DIE PILLAR STATION OF VACUUM FORMING MACHINE
Research Paper ISSN 2278 0149 www.ijmerr.com Vol. 3, No. 3, July, 2014 2014 IJMERR. All Rights Reserved DESIGN & ANALYSIS OF CONNECTING ROD OF FORMING AND CUTTING DIE PILLAR STATION OF VACUUM FORMING MACHINE
More informationFinite Element Analysis with Inspire Finite Element Analysis By Rahul Ponginan Updated by Sanjay Nainani
Finite Element Analysis with Inspire Finite Element Analysis By Rahul Ponginan Updated by Sanjay Nainani Finite Element Analysis was first developed over 60 years ago as a method to accurately predict
More informationCHAPTER 4. Numerical Models. descriptions of the boundary conditions, element types, validation, and the force
CHAPTER 4 Numerical Models This chapter presents the development of numerical models for sandwich beams/plates subjected to four-point bending and the hydromat test system. Detailed descriptions of the
More informationChapter 1 Introduction
Chapter 1 Introduction GTU Paper Analysis (New Syllabus) Sr. No. Questions 26/10/16 11/05/16 09/05/16 08/12/15 Theory 1. What is graphic standard? Explain different CAD standards. 2. Write Bresenham s
More informationSTATIC FINITE ELEMENT ANALYSIS AND VALIDATION OF N1 TYPE VEHICLE CHASSIS MEMBERS FOR BENDING PERFORMANCE
STATIC FINITE ELEMENT ANALYSIS AND VALIDATION OF N1 TYPE VEHICLE CHASSIS MEMBERS FOR BENDING PERFORMANCE 1 CHINMAY POTDAR, 2 AMEY PISE, 3 AISHWARYA DUBEY, 4 SUSHRUT JADHAV 1, 3 TATA Technologies Limited,
More informationANSYS Workbench Guide
ANSYS Workbench Guide Introduction This document serves as a step-by-step guide for conducting a Finite Element Analysis (FEA) using ANSYS Workbench. It will cover the use of the simulation package through
More informationSOLIDWORKS SIMULATION
SUPPORTING EXCELLENCE GET ENGINEERING INSIGHTS WITH VIRTUAL SOPHISTICATED IS NO LONGER JUST FOR SPECIALISTS Concurrent Engineering for more informed design Simulation gives product engineers access to
More informationTop Layer Subframe and Node Analysis
Top Layer Subframe and Node Analysis By Paul Rasmussen 2 August, 2012 Introduction The top layer of the CCAT backing structure forms a critical interface between the truss and the primary subframes. Ideally
More informationStamp a Part Perfectly on the Very First Hit.
Stamp a Part Perfectly on the Very First Hit. Using the right software tool it is possible. DYNAFORM allows you to accurately simulate the stamping of parts to predict formability issues, validate die
More informationLoads Recognition Tools Checks Reports
Loads Recognition Tools Checks Reports SDC Verifier is a powerful postprocessor program with an advanced calculation core which works seamlessly with Siemens multi-solver, FEA software suite Femap. SDC
More informationSeparation Connector. Analysis of Final Design Concepts Document
Separation Connector By Koll Christianson, Amelia Fuller, Luis Herrera, Zheng Lian, and Shaun Shultz Team 19 Analysis of Final Design Concepts Document Submitted towards partial fulfillment of the requirements
More informationSolidworks tutorial. simulation. Author : M.Ghasemi. Contact us: solidworksadvisor.com
Solidworks tutorial simulation Author : M.Ghasemi Contact us: info @ solidworksadvisor.com This time we are going to use the solidworks simulation to analyze a chair leg. We all have seen a chair like
More informationLesson: Lightweighting of Robot Gripper Arm
Lesson: Lightweighting of Robot Gripper Arm This functionality is only available in Fusion 360 Ultimate. In this exercise we'll perform a Shape Optimization study to reduce the weight of a robot gripper
More informationDesign and Analysis for a Large Two-Lens Cell Mount Katie Schwertz OptoMechanics 523: Final Project May 15, 2009
Design and Analysis for a Large Two-Lens Cell Mount Katie Schwertz OptoMechanics 523: Final Project May 5, 2009 Abstract Presented below is a cell mount for two lenses that are 6 in diameter and made of
More informationVibration Analysis with SOLIDWORKS Simulation and SOLIDWORKS. Before you start 7
i Table of contents Before you start 7 Notes on hands-on exercises and functionality of Simulation Prerequisites Selected terminology 1: Introduction to vibration analysis 10 Differences between a mechanism
More informationHeat Exchanger Efficiency
6 Heat Exchanger Efficiency Flow Simulation can be used to study the fluid flow and heat transfer for a wide variety of engineering equipment. In this example we use Flow Simulation to determine the efficiency
More informationAbaqus/CAE Axisymmetric Tutorial (Version 2016)
Abaqus/CAE Axisymmetric Tutorial (Version 2016) Problem Description A round bar with tapered diameter has a total load of 1000 N applied to its top face. The bottom of the bar is completely fixed. Determine
More informationCOMPUTER AIDED ENGINEERING. Part-1
COMPUTER AIDED ENGINEERING Course no. 7962 Finite Element Modelling and Simulation Finite Element Modelling and Simulation Part-1 Modeling & Simulation System A system exists and operates in time and space.
More informationEN1740 Computer Aided Visualization and Design Spring /26/2012 Brian C. P. Burke
EN1740 Computer Aided Visualization and Design Spring 2012 4/26/2012 Brian C. P. Burke Last time: More motion analysis with Pro/E Tonight: Introduction to external analysis products ABAQUS External Analysis
More informationby Mahender Reddy Concept To Reality / Summer 2006
by Mahender Reddy Demand for higher extrusion rates, increased product quality and lower energy consumption have prompted plants to use various methods to determine optimum process conditions and die designs.
More informationPressure Vessel Engineering Ltd. ASME Calculations - CRN Assistance - Vessel Design - Finite Element Analysis
PVEng Pressure Vessel Engineering Ltd. ASME Calculations - CRN Assistance - Vessel Design - Finite Element Analysis Design Conditions Code: ASME VIII-1 Year: 2007 Finite Element Analysis Report - VIII-1
More informationSDC Verifier is a powerful postprocessor program with an advanced calculation core which works seamlessly with Siemens multi-solver, FEA software
SDC Verifier is a powerful postprocessor program with an advanced calculation core which works seamlessly with Siemens multi-solver, FEA software suite Simcenter 3D. SDC Verifier & Simcenter 3D SDC Verifier
More informationTime and Location: T 6:30 PM to 9:20 PM SAL 127 (Section 1, 28758) Th 6:30 PM to 9:20 PM SAL 127 (Section 2, 28759)
UNIVERSITY OF SOUTHERN CALIFORNIA AME 408, Computer-Aided Design of Mechanical Systems Fall 2017 Time and Location: T 6:30 PM to 9:20 PM SAL 127 (Section 1, 28758) Th 6:30 PM to 9:20 PM SAL 127 (Section
More informationTopology Optimization Design of Automotive Engine Bracket
Energy and Power Engineering, 2016, 8, 230-235 Published Online April 2016 in SciRes. http://www.scirp.org/journal/epe http://dx.doi.org/10.4236/epe.2016.84021 Topology Optimization Design of Automotive
More informationStatic Analysis of Bajaj Pulsar 150 CC Crankshaft Using ANSYS
Static Analysis of Bajaj Pulsar 150 CC Crankshaft Using ANSYS Surekha S. Shelke 1, Dr. C. L. Dhamejani 2, A. S. Gadhave 3 1 P.G. Student, Department of Mechanical Engineering, JCOE Kuran 2 Principal, Department
More informationAnalysis of Machine Elements using SolidWorks Simulation 2010
Analysis of Machine Elements using SolidWorks Simulation 2010 John R. Steffen, Ph.D., P.E. SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation CHAPTER #2 CURVED BEAM ANALYSIS This
More informationES 230 Strengths Intro to Finite Element Modeling & Analysis Homework Assignment 5
ES 230 Strengths Intro to Finite Element Modeling & Analysis Homework Assignment 5 The GREAT Combined Load Problem Moving on to Principal Stresses and von Mises Failure Criteria Open up your ANSYS model
More informationAn Introduction to Stress Analysis Applications with SolidWorks Simulation, Student Guide
Engineering Design and Technology Series An Introduction to Stress Analysis Applications with SolidWorks Simulation, Student Guide SolidWorks Corporation 300 Baker Avenue Concord, Massachusetts 01742 USA
More informationMultiframe August 2007
Multiframe 10.03 09 August 2007 Windows Release Note This release note describes the Windows version 10.03 of Multiframe, Steel Designer and Section Maker. This release will run on Windows 2000/XP/2003/Vista.
More informationNX Advanced FEM. fact sheet
Advanced FEM fact sheet www.ugs.com Summary Advanced FEM is a comprehensive multi-cad finite element modeling and results visualization product that is designed to meet the needs of experienced CAE analysts.
More information2008 International ANSYS Conference
2008 International ANSYS Conference FEM AND FSI SIMULATIONS OF IMPACT LOADS ON GRP SUBSEA COMPOSITE COVERS Kjetil Rognlien, MSc Technical Consultant EDR AS, Norway 2008 ANSYS, Inc. All rights reserved.
More informationAnalysis of Machine Elements Using SolidWorks Simulation 2013
Analysis of Machine Elements Using SolidWorks Simulation 2013 John R. Steffen, Ph.D., P.E. SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com
More informationFINITE ELEMENT MODELING OF THICK PLATE PENETRATIONS IN SMALL CAL MUNITIONS
FINITE ELEMENT MODELING OF THICK PLATE PENETRATIONS IN SMALL CAL MUNITIONS Raymond Chaplin RDAR-MEM-I Picatinny Arsenal, NJ raymond.c.chaplin@us.army.mil 973-724-8562 Why Finite Element Modeling? Reduced
More informationMechanical simulation design of the shaft type hybrid mechanical arm based on Solidworks
International Forum on Energy, Environment and Sustainable Development (IFEESD 2016) Mechanical simulation design of the shaft type hybrid mechanical arm based on Solidworks Liu Yande1, a Hu Jun2,b Ouyang
More informationStatic and dynamic simulations for automotive interiors components using ABAQUS
Static and dynamic simulations for automotive interiors components using ABAQUS Mauro Olivero, Vincenzo Puleo, Massimo Barbi, Fabrizio Urbinati, Benedetta Peyron Fiat Research Centre Giancarlo Luciani,
More informationFrame Analysis Using Multiframe4D
Frame Analysis Using Multiframe4D 1. The software is on the computers in the college computing lab (http://thelab.tamu.edu) in Programs under the Windows Start menu. Multiframe4D is under the COSC menu.
More informationReport Generator. TITLE: Report Generator COMPANY ADRESS CITY COUNTRY. SUBJECT: User Guide Extension V AUTHOR: Magnus Gustafsson
COMPANY ADRESS CITY COUNTRY DATE: 2018-05-24 NO. of Pages 31 TITLE: SUBJECT: AUTHOR: Magnus Gustafsson PREPARED FOR: First Lastname Table of Contents 1. INTRODUCTION... 3 2. MODEL... 6 2.1. GEOMETRY...
More informationSolidWorks Optimization
white paper SolidWorks Optimization inspiration SUMMARY Optimization is the calculation of weight, stress, cost, deflection, natural frequencies, and temperature factors, which are dependent on variables
More informationDesign of a Precision Robot Wrist Interface. Patrick Willoughby Advisor: Alexander Slocum MIT Precision Engineering Research Group
Design of a Precision Robot Wrist Interface Patrick Willoughby Advisor: Alexander Slocum MIT Precision Engineering Research Group Project Summary Problem: Current bolted robot wrist replacements are inaccurate,
More information