TABLE OF CONTENT. VERSION 15: WHAT S NEW p. 2
|
|
- Timothy Todd
- 6 years ago
- Views:
Transcription
1
2 VERSION 15: WHAT S NEW p. 2 TABLE OF CONTENT 1. General Vectorisation of images Vectorise lines Edges Helmert Annotations: Manhole pointers Positioning Cross sections Settings Multiple sections Gradient Intersections Drawing tools Trim/Extend based on selection Do not change height Extend line Extrapolate Z Snapping to points DWG/DXF Xref US Feet Images in hyperlinks WMTS LandXML Import Shape Help system Edit attributes Relative external links Info Layer tools JPG Text in linestyles... 10
3 VERSION 15: WHAT S NEW p Unpack texts CRS OSGB New CRS management system User defaults Resizable dialogs VBA VBA editor POM Technical improvements New File version Multithreading for pointcloud rendering in 3D window bit Licensing Pointclouds Vectorisation Vectorise section Vectorise 3Dlines Classification Ground point classification Colorisation Undo/Redo-system D Window Drawing Tools Clipping Walking Section planes Section box Snapping Vertical lines Tab DTM Reduction Rendering Boundary lines... 17
4 VERSION 15: WHAT S NEW p From - To Volume operation Active DTM... 18
5 VERSION 15: WHAT S NEW p GENERAL 1.1. VECTORISATION OF IMAGES This feature converts an image into lines VECTORISE LINES Import an image that contains lines that need to be vectorised. Right-click the image, then select Vectorise lines. An example: Original image: Vectorised result: Lines are not lines, but pixels. The lines are real Pythagoras lines EDGES This method can be used when the image doesn t contain lines, but colorized areas. Right-click the image, then select Vectorise edge. Original image: Vectorised result:
6 VERSION 15: WHAT S NEW p. 6 Lines are created on the edge of one color to the other HELMERT Helmert transformation is extended with a Z component: 1.3. ANNOTATIONS: MANHOLE POINTERS When selecting the annotation style pointer manhole broken, the placement of the text is automatically done like the examples above: the first line of text is placed above the horizontal line, the next lines of texts are placed below the horizontal line POSITIONING Range simple text annotations are drawn closer to the line when set bottom/inside CROSS SECTIONS The cross sections settings dialog is reworked. Each line in the list corresponds with a line in the resulting profile drawing. When having selected references, you can add them separately. The resulting drawing no longer contains curves, but regular lines.
7 VERSION 15: WHAT S NEW p SETTINGS It is now possible to save the profile settings for both along & perpendicular cross sections. In one Pythagoras session, the settings are stored MULTIPLE SECTIONS When selecting multiple paths, and starting the tool Cross section along path, multiple resulting drawings are created GRADIENT Cross section along path: gradient is shown INTERSECTIONS The intersection of line-references with a cross section along a path is shown with height and distance DRAWING TOOLS TRIM/EXTEND BASED ON SELECTION It is now possible to trim or extend multiple lines at once. Select the lines that need to be extended or trimmed. Select the tool Trim selected lines, or Extend selected lines in the drawing tools. Click on the line where the lines need to be extended to, or trimmed to. When trimming, click on the side where the lines need to remain DO NOT CHANGE HEIGHT When holding SHIFT while using the default trim/extend-tool changes., the height of the moved point no longer
8 VERSION 15: WHAT S NEW p EXTEND LINE When holding CTRL: the original point is kept EXTRAPOLATE Z When the new line snaps to the second line the Z value is not calculated based on the second line if ALT or CTRL are pressed. This applies to: Create parallel line Extend Line Trim/extend/align line SNAPPING TO POINTS Some tools (like extend line) previously didn t snap to points. They do now. This snapping to points is also applied to: Create parallel line Create perpendicular line Extend line Trim/extend/align line 1.6. DWG/DXF XREF When the DWG/DXF contains Xrefs (External References), an error message is displayed US FEET When exporting or importing, it is possible to choose US feet as unit IMAGES IN HYPERLINKS These are now exported to DXF WMTS WMTS is now also supported by Pythagoras. The settings for WMTS can be made in the same location as WMS: Settings Webservice manager. Examples of WMTS s for Belgium: NGI Cartoweb: topographic maps AGIV: GRB, orthographic pictures, ABW, and some other historical maps.
9 VERSION 15: WHAT S NEW p. 9 e=wmts&version=1.0.0 WMTS is usually hosted by governmental organisations. All information can usually be found on the webpages of such organisations. By entering WMTS nameoftheinformationyouseek in your favourite internet search robot, you will find more information about the WMTS LANDXML Export LandXML is now available. It can export the following types of objects: points: as CgPoints lines: as PlanFeature lines arcs: as PlanFeature arcs circles: as PlanFeature polylines curves: as PlanFeature polylines clothoids: as PlanFeature polylines polygons: as parcels It also exports terrain models as surfaces. The question is raised if you want to export all DTMs, the active DTM or skip DTMs. The resulting file can be validated with the validator tool available on landxml.org IMPORT SHAPE If there is not enough memory to import the complete SHP, it is still imported partially. It is also possible to define a Bounding Box HELP SYSTEM Each dialog now has a? : This leads directly to the HELP page of the dialog EDIT ATTRIBUTES RELATIVE EXTERNAL LINKS Relative external links are now also available:
10 VERSION 15: WHAT S NEW p INFO dz and slope are now also displayed in the Info-tab of lines: LAYER TOOLS The Isolate tool can now be applied to Local+Page, Local or Page JPG A new type of JPG version is now supported TEXT IN LINESTYLES Texts can now be used in linestyles UNPACK TEXTS Texts can now be unpacked via Edit Adapt Unpack.
11 VERSION 15: WHAT S NEW p CRS OSGB36 OS-GB36 is now supported (British Coordinate System). Go to Settings Preferences CRS and select OSGB36 in the list NEW CRS MANAGEMENT SYSTEM We can now easily add a new CRS that uses Tranverse Mercator, Lambert 1 and 2 projection systems by using an external XML-file. These XML-files use an unique formatting required for Pythagoras and are created by Pythagoras themselves. They are downloaded by the user when setting the CRS active in the Preferences-menu. The XML is based on the information provided by USER DEFAULTS The maximum number of user defaults is now RESIZABLE DIALOGS Dialogs can now be resized, for instance the layer manager VBA VBA EDITOR Add comment-block Uncomment block Improved find over all macro files: files don t have to be open POM Annotation objects can now be created via VBA via the CadObject class with the method CreateAnnotation. A HTML-Window can be created via VBA. Class: HTMLWindow TECHNICAL IMPROVEMENTS NEW FILE VERSION The file format is redesigned from zero. This results in: Lesser sensitivity for corruption: when having a sudden interrupt of the writing process (power problems/network problems) this doesn t result in a corrupted file. Forward compatibility: version 16 -files can be opened in Pythagoras V15
12 VERSION 15: WHAT S NEW p. 12 Backbard compatibility: older files that are opened in a more recent version, no longer need to be converted. For instance V15-files that are opened in V16, no longer need to be converted. The forward and backward compatibility issues will only begin to show its advantages as from version MULTITHREADING FOR POINTCLOUD RENDERING IN 3D WINDOW For reading the data and rendering data, a different thread is used. This results in a higher framerate when rendering pointclouds in the 3D window BIT Pythagoras is now available in both 32-bit and 64-bit LICENSING The licensing system is improved.
13 VERSION 15: WHAT S NEW p POINTCLOUDS 2.1. VECTORISATION VECTORISE SECTION Using section planes One of the two planes of the section plane is closest to the camera: the objects that lie in this plane, are vectorised. Section of pointcloud file of techroom: Result after vectorising: Using section box First, the largest areas of the box are taken into account. Then, the area that is closest to the camera is taken and vectorised VECTORISE 3DLINES The pointcloud: The result:
14 VERSION 15: WHAT S NEW p CLASSIFICATION The LAS format can include classification information of the points: whether a point is on the ground, vegetation, water, a building, This classification information is now also imported into Pythagoras GROUND POINT CLASSIFICATION A new algorithm is implemented to classify the ground points of a point cloud. Right click on a pointcloud to access this feature. The identification of all ground points is time consuming. It processes every point of the point cloud and rewrites it into a new (or updated) ppc file. How it works A rough DTM of the lowest points of the pointcloud is calculated. Then every point of the pointcloud is compared with this DTM: is the difference in height below a certain factor, then it is considered a groundpoint. Is the difference in height greater than a certain factor, then it is considered to be not a groundpoint. In case classification information was already included in the pointcloud, only the ground classification is changed. The other classifications are left untouched COLORISATION Colorisation can now be done based on elevation, RGB-values, classification (if available).
15 VERSION 15: WHAT S NEW p UNDO/REDO-SYSTEM Pointcloud operations can now be undone/redone.
16 VERSION 15: WHAT S NEW p D WINDOW 3.1. DRAWING TOOLS Extra drawing tools in 3D window for parallel lines, perpendicular lines, cut objects, divide objects, extend line, trim/extend/project, create intersection point: 3.2. CLIPPING It is now possible to delete parts of a pointcloud, using any camera view WALKING This tool lets you walk through pointclouds on eye height SECTION PLANES It is now possible to save section planes. This is integrated in the Custom Camera s. When creating or editing a section plane, it is possible to define its width SECTION BOX This tool lets you define a section box SNAPPING It is now possible to snap to ½, ¼, of a line 3.7. VERTICAL LINES Improved feedback in the control panel for vertical lines 3.8. TAB When moving your cursor over lines, points, or polygons, the Control Panel shows different information when using the TAB button. For example, for lines it shows 3D-length, 2D-length, deltaz, Bearing, Slope percentage.
17 4. DTM VERSION 15: WHAT S NEW p REDUCTION It is now much simpler to reduce the number of points that needs to be used when calculating a DTM. This is especially useful when working with pointclouds RENDERING Rendering in 2D and 3D Window is improved. In the 2D-Window, when having a dense DTM, the triangles are no longer shown onscreen when zoomed out a lot. This results in a light green area: 4.3. BOUNDARY LINES When selecting the DTM menu Boundary lines, the boundary of the active DTM is created as lines on the active layer FROM - TO There is now also a to -column in the DTM colorizing dialog, making it more clear. The to -boundary is also shown in the legend.
18 VERSION 15: WHAT S NEW p VOLUME OPERATION It is now possible to cancel a DTM volume calculation by pressing ESCAPE during the calculation ACTIVE DTM It is now possible to not have an active DTM.
DesignCAD 3D Max 22.1 Release Notes
DesignCAD 3D Max 22.1 Release Notes December 2012 This update to DesignCAD offers the following improvements and fixes: BasicCAD: We have added some new Query/Change parameters to address missing functionality:
More informationDWG/DXF Export. Some attribute values in blocks weren't exporting correctly.
DesignCAD 3D Max 20.1 Release Notes Nov. 9, 2010 DesignCAD 3D Max 20.1 introduces the following fixes and changes: DWG/DXF Export. Sometimes arcs and elliptical arcs, when exported to dwg or dxf format,
More informationTCP MDT Digital Terrain Model - V7.5
TCP MDT Digital Terrain Model - V7.5 Standard Version Introduction The Standard Version is suitable for carrying out all kinds of topographical survey projects, terrain profiles, volume calculations etc.
More informationPictometry for ArcGIS Desktop Local Guide For ArcGIS Desktop Version 10.3
for ArcGIS Desktop Local Guide For ArcGIS Desktop Version 10.3 June 2015 Copyright 2010-2015 International Corp. All rights reserved. No part of this publication may be reproduced, stored in a retrieval
More informationPictometry for ArcGIS Desktop Local Guide For ArcGIS Desktop Version 10
Pictometry for ArcGIS Desktop Local Guide For ArcGIS Desktop Version 10 September 2013 Copyright 2010-2013 Pictometry International Corp. All rights reserved. No part of this publication may be reproduced,
More informationEDITING SHAPES. Lesson overview
3 CREATING AND EDITING SHAPES Lesson overview In this lesson, you ll learn how to do the following: Create a document with multiple artboards. Use tools and commands to create basic shapes. Work with drawing
More informationDesignCAD 2D 2018 Release Notes
DesignCAD 2D 2018 Release Notes Oct 30, 2017 DesignCAD 2D 2018 (internal version number 27) has the following improvements. Icon Scaling Previous versions only had two icon sizes available 16-pixel and
More informationHow to create shapes. Drawing basic shapes. Adobe Photoshop Elements 8 guide
How to create shapes With the shape tools in Adobe Photoshop Elements, you can draw perfect geometric shapes, regardless of your artistic ability or illustration experience. The first step to drawing shapes
More informationPoint Cloud Classification
Point Cloud Classification Introduction VRMesh provides a powerful point cloud classification and feature extraction solution. It automatically classifies vegetation, building roofs, and ground points.
More informationWhat s new in Civil Designer 2015
What s new in Civil Designer 2015 We have concentrated on adding in additional functionality requested by our extensive client base as well as optimising existing features. Survey & Terrain Significant
More informationTutorial (Intermediate level): Dense Cloud Classification and DTM generation with Agisoft PhotoScan Pro 1.1
Tutorial (Intermediate level): Dense Cloud Classification and DTM generation with Agisoft PhotoScan Pro 1.1 This tutorial illustrates how to perform dense point cloud classification in manual and automatic
More informationUndo Button Clicking this tool will undo the last action. Clicking on this tool multiple times will undo all subsequent changes that were made.
SMS Featured Icons: Editor Window This document includes a brief description of the tools in the SMS Desktop Software Editor windows, as well as showing you the toolbar shortcuts to easily access these
More informationLand Development Suite for BricsCAD Manual: Survey and Cogo commands:
Land Development Suite for BricsCAD Manual: Survey and Cogo commands: Before you begin go to Drafting -- Drawing Setup Drawing Setup - Select English or Metric units -changes the ltscale and labeling precision,
More informationMET 107 Drawing Tool (Shapes) Notes Day 3
MET 107 Drawing Tool (Shapes) Notes Day 3 Shapes: (Insert Tab Shapes) Example: Select on the rounded rectangle Then use the mouse to position the upper left corner and produce the size by dragging out
More informationFixed problem with PointXYZ command's Z value changing to previous Y value.
DesignCAD 3D Max 19.1 Release Notes Mar. 20, 2009 DesignCAD 19.1 offers the following fixes and enhancements: The number of useable layers was increased from 1,000 to 2,000. Fixed problem with PointXYZ
More informationGrading and Volumes CHAPTER INTRODUCTION OBJECTIVES
CHAPTER 10 Grading and Volumes INTRODUCTION AutoCAD Civil 3D uses surface breaklines, cogo points, contours, feature lines, and grading objects to create a surface design. There are numerous ways to grade
More informationNEWSLETTER Practical Solutions to Technical Problems. Welcome to NRG Import PDF. Import Point Cloud. Overview. Road / Rail Design
NEWSLETTER 2018 2018 Welcome to NRG 2018 Import PDF Page NRGWIN Projects Overview 2 Road Design 7 Import Point Cloud Overview DTM Map Workspace 2 Show List 2 Merge multiple files 3 Multiple render models
More informationDigital Terrain Model V 6.5
TCP MDT Digital Terrain Model V 6.5 Professional Version Introduction The Professional Version is designed to assist users in all the phases of carrying out a Surveying or Civil Engineering project. Its
More informationTBC v License Matrix - Rev 0
Command Name Viewer (Unlicensed) Base Intermediate Advanced Advanced Drafting Aerial Photogrammetry Data Prep GIS Scanning Tunneling Category 3D Preset Views x x x x General Software 3D View Projection
More informationRoof Designer USER S GUIDE
Roof Designer USER S GUIDE Roof Designer-1 Roof Designer-2 Roof Designer The Roof Designer makes it easy to define and place custom roofs in your project. You can start the Roof Designer independently,
More informationTerraScan New Features
www.terrasolid.com TerraScan New Features Arttu Soininen 23.01.2018 Import Scanner Positions for Trajectories File / Import scanner positions menu command in Manage Trajectories reads scanner positions
More informationRoadway Design using GeoTools
Roadway Design using GeoTools Introduction GeoTools is a general-purpose productivity tool for users of all types of geographic data. In the Civil Tools section, there are many tools for Civil engineering
More informationReference Manual. Version 1.1
Version 1.1 TABLE OF CONTENTS 1. INSTALLATION... 1 Requirements... 1 Installation process... 1 After installation... 3 2. USER INTERFACE... 4 Introduction... 4 Main window... 5 Project management window...
More informationHome Designer Update Notes
Home Designer 18.3.2.2 Update Notes October 28, 2016 1 General Notes This is a list of the changes made to Home Designer 2017 in the 18.3.2.2, 18.3.1.2, 18.3.0.47, 18.2.1.2, 18.2.0.42, and 18.1.1.4 program
More information14. Using Illustrator CC with Other Adobe Applications
14. Using Illustrator CC with Other Adobe Applications Lesson overview In this lesson, you ll learn how to do the following: Place linked and embedded graphics in an Illustrator file. Place multiple images
More informationTutorial: Using LiDAR Data for Power Line Corridor Management
Tutorial: Using LiDAR Data for Power Line Corridor Management Contents Introduction... 2 Software requirements... 2 Sample data... 2 Exercise 1: Power line corridor modeling... 3 Classifying power lines
More informationPipe Networks CHAPTER INTRODUCTION OBJECTIVES
CHAPTER 11 Pipe Networks INTRODUCTION Pipe networks are integral to a site-design solution. The piping system s complexity can vary from simple culverts to several storm and sanitary networks that service
More informationTechnical note. This note is a work through of the functionality provided in the point cloud module in SCC and later.
15 Moyville Lawns, Taylors Lane, Rathfarnham Dublin 16 Ireland Tel: +3531 4958714/5/6 Fax: +3531 4958717 Email: sales@atlascomputers.ie support@atlascomputers.ie Web: www.atlascomputers.ie Technical note
More informationMARS v Release Notes Revised: May 23, 2018 (Builds and )
MARS v2018.0 Release Notes Revised: May 23, 2018 (Builds 8302.01 8302.18 and 8350.00 8352.00) Contents New Features:... 2 Enhancements:... 6 List of Bug Fixes... 13 1 New Features: LAS Up-Conversion prompts
More informationRoof Wizard. Advanced Software for Roof Modeling and Estimating. Tutorial for Modifying Reports
Roof Wizard Advanced Software for Roof Modeling and Estimating Tutorial for Modifying Reports Document Issue 1.0.0-25th October 1999 Table of Contents TABLE OF CONTENTS... 2 INTRODUCTION... 2 Using this
More informationIntroduction to Microsoft Office PowerPoint 2010
Introduction to Microsoft Office PowerPoint 2010 TABLE OF CONTENTS Open PowerPoint 2010... 1 About the Editing Screen... 1 Create a Title Slide... 6 Save Your Presentation... 6 Create a New Slide... 7
More informationCity of La Crosse Online Mapping Website Help Document
City of La Crosse Online Mapping Website Help Document This document was created to assist in using the new City of La Crosse online mapping sites. When the website is first opened, a map showing the City
More informationTRAINING SESSION Q2 2016
There are 8 main topics in this training session which focus on the Sketch tools in IRONCAD. Content Sketch... 2 3D Scene Background Settings... 3 Creating a new empty Sketch... 4 Foam with cut out for
More informationVectorworks Essential Tutorial Manual by Jonathan Pickup. Sample
Vectorworks Essential Tutorial Manual by Jonathan Pickup Table of Contents 0.0 Introduction... iii 0.1 How to Use this Manual... iv 0.2 Real World Sizes... iv 0.3 New Ways of Drawing... v 1.0 Introduction
More informationTutorial 7: Adding Features and Editing Line and Polygon Layers
Tutorial 7: Adding Features and Editing Line and Polygon Layers Tutorial Content 7.1. When should I use a line layer to represent data? 7.2. How do I add line features? 7.3. How to use the snapping tool?
More informationADAPT-Builder. Toolbar Descriptions Updated November Copyright All rights reserved 2017
ADAPT-Builder Toolbar Descriptions Updated November 2017 Copyright All rights reserved 2017 Main Toolbar The Main Toolbar is where the typical functions that are in most programs such as New, Open, Save,
More informationIntraMaps End User Manual
IntraMaps End User Manual For IntraMaps Version 8 Date: 6 th July 2014 Contents Introduction... 4 What is IntraMaps?... 4 Application... 5 Main Toolbar... 6 View... 7 Original View:... 7 Pan:... 7 Zoom
More informationInterface to icon Construction Instruments and Machine Control
Interface to icon Construction Instruments and Machine Control CONTENTS 1. Preamble 2. Install and Configure LSS 3. Exporting data to Leica Machine Control (Scanlaser) 4. Importing LSS exported files into
More informationGDL Toolbox 2 Reference Manual
Reference Manual Archi-data Ltd. Copyright 2002. New Features Reference Manual New Save GDL command Selected GDL Toolbox elements can be exported into simple GDL scripts. During the export process, the
More informationLD20493 From AutoCAD Civil 3D to Storm and Sanitary Analysis - Pond Design Using Volume-Grading Tools
LD20493 From AutoCAD Civil 3D to Storm and Sanitary Analysis - Pond Design Using Volume-Grading Tools Kevin Larkin LSC Design, Inc. Learning Objectives Learn how to dynamically model stormwater ponds using
More informationTutorial 01 Quick Start Tutorial
Tutorial 01 Quick Start Tutorial Homogeneous single material slope No water pressure (dry) Circular slip surface search (Grid Search) Intro to multi scenario modeling Introduction Model This quick start
More informationMap Viewer User Guide. January 2018
January 2018 Revision History Map Viewer 3.0.1 Revision Date Author / Reviewer Description of Changes 1 April 6, 2017 RWE Addition of Known Issues, format changes. 2 April 11, 2017 RWE Revision for PROD
More informationPhotoshop / Editing paths
Photoshop / Editing paths Path segments, components, and points Select a path Adjust path segments Add or delete anchor points Convert between smooth points and corner points Adjust path components Path
More informationAutodesk Fusion 360 Training: The Future of Making Things Attendee Guide
Autodesk Fusion 360 Training: The Future of Making Things Attendee Guide Abstract After completing this workshop, you will have a basic understanding of editing 3D models using Autodesk Fusion 360 TM to
More informationRelay Online How To:
Relay Online How To: ---------------------------------------- Event Announcements Page --------------------------------------- The Event Announcements page is a great way to share upcoming meetings, fundraisers
More informationSI-100 Digital Microscope. User Manual
SI-100 Digital Microscope User Manual Read this manual before use Keep for future reference Content 1 Introduction... 3 1.1 About The SI-100... 3 1.2 Advantage of SI-100... 3 1.3 Product Specification...
More informationInDesign CC 2014 Essential Skills
InDesign CC 2014 Essential Skills Adobe InDesign Creative Cloud 2014 University Information Technology Services Training, Outreach, Learning Technologies & Video Production Copyright 2015 KSU Division
More informationAdobe InDesign CS6 Tutorial
Adobe InDesign CS6 Tutorial Adobe InDesign CS6 is a page-layout software that takes print publishing and page design beyond current boundaries. InDesign is a desktop publishing program that incorporates
More informationGuide to WB Annotations
Guide to WB Annotations 04 May 2016 Annotations are a powerful new feature added to Workbench v1.2.0 (Released May 2016) for placing text and symbols within wb_view tabs and windows. They enable generation
More informationRelease Notes SPECTRA PRECISION SURVEY OFFICE. Version
Release Notes SPECTRA PRECISION SURVEY OFFICE Version 3.90.1 Corporate office: Spectra Precision 10368 Westmoor Drive Westminster, CO 80021 USA www.spectraprecision.com Copyright and trademarks: 2005-2017,
More informationDisplay Layers in Geosoft 3D View
Use the New 2D/3D Workflow features in Target for ArcGIS In Target for ArcGIS version 3.5, there are three new interconnected features that make integrating 2D and 3D data in plan and section maps easier.
More informationGEO 154 CARTOGRAPHY II- PLOTTING USING AUTOCAD- ASSIGMENT HELP
GEO 154 CARTOGRAPHY II- PLOTTING USING AUTOCAD- ASSIGMENT HELP DOCUMENT. For one to two reasons data may not be in a format that can be integrated into AutoCAD software, but coordinates may be separated
More information2D rendering takes a photo of the 2D scene with a virtual camera that selects an axis aligned rectangle from the scene. The photograph is placed into
2D rendering takes a photo of the 2D scene with a virtual camera that selects an axis aligned rectangle from the scene. The photograph is placed into the viewport of the current application window. A pixel
More informationREVIT ARCHITECTURE 2016
Page 1 of 6 REVIT ARCHITECTURE 2016 Revit Architecture 2016: CREATE A CHAMFERED COLUMN COMPONENT About creating a chamfered column family typical to the Victorian cottage style. Add the column to your
More informationTcpMDT Version 7.0 Summary of Differences with Version 6.5
Sumatra, 9 E-29190 Málaga (Spain) www.aplitop.com Tel.: +34 95 2439771 Fax: +34 95 2431371 TcpMDT Version 7.0 Summary of Differences with Version 6.5 CAD Versions supported TcpMDT 7 works with several
More informationGoogle LayOut 2 Help. Contents
Contents Contents... 1 Welcome to LayOut... 9 What's New in this Release?... 10 Learning LayOut... 12 Technical Support... 14 Welcome to the LayOut Getting Started Guide... 15 Introduction to the LayOut
More informationSetting Up Your Drawing Environment
Setting Up Your Drawing Environment In This Chapter 3 After you start a drawing, you can change its settings, including drawing units and limits, snap and grid settings, and layer, linetype, and lettering
More informationCHAPTER 1 COPYRIGHTED MATERIAL. Getting to Know AutoCAD. Opening a new drawing. Getting familiar with the AutoCAD and AutoCAD LT Graphics windows
CHAPTER 1 Getting to Know AutoCAD Opening a new drawing Getting familiar with the AutoCAD and AutoCAD LT Graphics windows Modifying the display Displaying and arranging toolbars COPYRIGHTED MATERIAL 2
More informationRevit Architecture 2015 Basics
Revit Architecture 2015 Basics From the Ground Up Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationLet s see the use of each option available under create feature line window:
FEATURE LINE: Feature line is a kind of a line or an object which we can use as a base line or foot print of grading object. In civil 3d if you want use grading tool you have some kind of base or foot
More informationExcel Rest of Us! AQuick Reference. for the. Find the facts you need fast. FREE daily etips at dummies.com
Find the facts you need fast FREE daily etips at dummies.com Excel 2002 AQuick Reference for the Rest of Us! Colin Banfield John Walkenbach Bestselling author of Excel 2002 Bible Part Online II Part II
More informationTcpMDT. Digital Terrain Model Version 7.5. TcpMDT
Digital Terrain Model Version 7.5 Versions and Modules PROFESSIONAL STANDARD IMAGES SURVEYING POINT CLOUD Product Features STANDARD Surveying Points Management Digital Terrain Model Contours Terrain Cross
More informationTCP MDT Digital Terrain Model - V7
TCP MDT Digital Terrain Model - V7 Professional Version Introduction The Professional Version is designed to assist the user at all stages of developing a project in the context of Topography and Civil
More informationSketchUp + Google Earth LEARNING GUIDE by Jordan Martin. Source (images): Architecture
SketchUp + Google Earth LEARNING GUIDE by Jordan Martin Source (images): www.sketchup.com Part 1: Getting Started with SketchUp GETTING STARTED: Throughout this manual users will learn different tools
More informationMODULE 1 BASIC LIDAR TECHNIQUES
MODULE SCENARIO One of the first tasks a geographic information systems (GIS) department using lidar data should perform is to check the quality of the data delivered by the data provider. The department
More informationStickFont Editor v1.01 User Manual. Copyright 2012 NCPlot Software LLC
StickFont Editor v1.01 User Manual Copyright 2012 NCPlot Software LLC StickFont Editor Manual Table of Contents Welcome... 1 Registering StickFont Editor... 3 Getting Started... 5 Getting Started...
More informationTerraScan Tool Guide
TerraScan Main Toolbox General Toolbar Draw Toolbar Groups Toolbar Vectorize Towers Toolbar Road Toolbar Buildings Toolbar Building Edges Toolbar View Laser Toolbar Model Toolbar Vectorize Wires Toolbar
More informationMapInfo Professional Evolution!
MapInfo Professional Evolution! A long history of improvement This presentation covers what is new in all of the MapInfo Pro releases since v9.0! MapInfo Pro Release History A feature release every year
More informationGstarCAD Complete Features Guide
GstarCAD 2017 Complete Features Guide Table of Contents Core Performance Improvement... 3 Block Data Sharing Process... 3 Hatch Boundary Search Improvement... 4 New and Enhanced Functionalities... 5 Table...
More information4) Finish the spline here. To complete the spline, double click the last point or select the spline tool again.
1) Select the line tool 3) Move the cursor along the X direction (be careful to stay on the X axis alignment so that the line is perpendicular) and click for the second point of the line. Type 0.5 for
More informationFollow-Up on the Nueces River Groundwater Problem Uvalde Co. TX
Follow-Up on the Nueces River Groundwater Problem Uvalde Co. TX Analysis by Ryan Kraft 12/4/2014 1 Problem Formulation A reduction in discharge was detected at a gauging station along a portion of the
More informationWhat's New in Surfer 14?
What's New in Surfer 14? There are many very exciting new features in Surfer v14! We focused on increasing usability, improving workflows to increase time savings, and including the most popular new features
More informationEnd User Guide. 2.1 Getting Started Toolbar Right-click Contextual Menu Navigation Panels... 2
TABLE OF CONTENTS 1 OVERVIEW...1 2 WEB VIEWER DEMO ON DESKTOP...1 2.1 Getting Started... 1 2.1.1 Toolbar... 1 2.1.2 Right-click Contextual Menu... 2 2.1.3 Navigation Panels... 2 2.1.4 Floating Toolbar...
More information4 TRANSFORMING OBJECTS
4 TRANSFORMING OBJECTS Lesson overview In this lesson, you ll learn how to do the following: Add, edit, rename, and reorder artboards in an existing document. Navigate artboards. Select individual objects,
More informationGeneral GPS TPS ROB X POLE VOL RDN RPL Jobs management System settings (units, precision, parameters, etc.)
XPAD Survey Modules XPAD Survey GPS TPS XPOLE General GPS TPS ROB XPOLE VOL RDN RPL Jobs management System settings (units, precision, parameters, etc.) Instruments GPS GPS TPS ROB XPOLE VOL RDN RPL Instrument
More informationFor more tips on using this workbook, press F1 and click More information about this template.
Excel: Menu to ribbon reference To view Office 2003 menu and toolbar commands and their Office 2010 equivalents, click a worksheet tab at the bottom of the window. If you don't see the tab you want, right-click
More informationRoadway Alignments and Profiles
NOTES Module 15 Roadway Alignments and Profiles In this module, you learn how to create horizontal alignments, surface profiles, layout (design) profiles, and profile views in AutoCAD Civil 3D. This module
More informationSWITCHING FROM RHINO TO VECTORWORKS
SWITCHING FROM RHINO TO VECTORWORKS INTRODUCTION There are a lot of 3D modeling software programs to choose from and each has its own strengths and weaknesses. For architects, flexibility and ease of use
More informationEXPORTING ASSETS. Lesson overview
15 EXPORTING ASSETS Lesson overview In this lesson, you ll learn how to do the following: Create pixel-perfect drawings. Use the Export For Screens command. Work with the Asset Export panel. Generate,
More informationWMS 9.1 Tutorial Watershed Modeling DEM Delineation Learn how to delineate a watershed using the hydrologic modeling wizard
v. 9.1 WMS 9.1 Tutorial Learn how to delineate a watershed using the hydrologic modeling wizard Objectives Read a digital elevation model, compute flow directions, and delineate a watershed and sub-basins
More information4) Click on Load Point Cloud to load the.czp file from Scene. Open Intersection_Demo.czp
Intersection 3D Demo 1) Open the Crash Zone or Crime Zone diagram program. 2) Click on to open the CZ Point Cloud tool. 3) Click on 3D/Cloud Preferences. a) Set the Cloud File Units (Feet or Meters). b)
More informationUpdated April 28, 2010
Performance Chief Architect download is faster and more efficient now that Library Catalogs are download on demand and can be mass downloaded or on an as needed basis. New Ray Trace Rendering Engine. Enhanced
More informationOrcad Capture Quick Reference
Orcad Capture Quick Reference Shortcut keys The toolbar The schematic page editor tool palette The part editor tool palette Cadence PCB Systems Division (PSD) offices PSD main office (Portland) (503) 671-9500
More informationStitchGraph User Guide V1.8
StitchGraph User Guide V1.8 Thanks for buying StitchGraph: the easy way to create stitch layouts for hardanger and other complex embroidery stitch types. StitchGraph is intended to allow you to create
More informationChapter 4 Determining Cell Size
Chapter 4 Determining Cell Size Chapter 4 Determining Cell Size The third tutorial is designed to give you a demonstration in using the Cell Size Calculator to obtain the optimal cell size for your circuit
More informationKitchen and Bath Design Tutorial
Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques
More informationCAPLAN version 4.7. April 2018
1 CAPLAN version 4.7 April 2018 During the winter months, we have again been able to implement a number of your suggestions in CAPLAN, many of which originated from our New Developments in CAPLAN event.
More informationSWITCHING FROM SKETCHUP TO VECTORWORKS
SWITCHING FROM SKETCHUP TO VECTORWORKS INTRODUCTION There are a lot of 3D modeling software programs to choose from and each has its own strengths and weaknesses. For architects, flexibility and ease of
More informationLayout Tutorial. Getting Started. Creating a Layout Template
Layout Tutorial This tutorial will explain how create a layout template, send views to a layout page, then save the document in PDF format. In this tutorial you will learn about: Creating a Layout Template
More informationPiping Design. Site Map Preface Getting Started Basic Tasks Advanced Tasks Customizing Workbench Description Index
Piping Design Site Map Preface Getting Started Basic Tasks Advanced Tasks Customizing Workbench Description Index Dassault Systèmes 1994-2001. All rights reserved. Site Map Piping Design member member
More informationProcessing LandXML files in SCC for machine control
15 Moyville Lawns, Taylors Lane, Rathfarnham Dublin 16 Ireland Tel: +3531 4958714/5/6 Fax: +3531 4958717 Email: sales@atlascomputers.ie support@atlascomputers.ie Web: www.atlascomputers.ie Ryan Balinger
More informationBook 5. Chapter 1: Slides with SmartArt & Pictures... 1 Working with SmartArt Formatting Pictures Adjust Group Buttons Picture Styles Group Buttons
Chapter 1: Slides with SmartArt & Pictures... 1 Working with SmartArt Formatting Pictures Adjust Group Buttons Picture Styles Group Buttons Chapter 2: Slides with Charts & Shapes... 12 Working with Charts
More informationK e y b o a r d s h o rt c ut s
Keyboard shortcuts Mouse navigation Middle button (wheel) Click + drag = pan Double-click = re-center view Left button Click = tool operation Click + spacebar = pan Shift + click + drag = multi-select
More informationLESSON 2 MODELING BASICS
LESSON 2 MODELING BASICS In this lesson we ll start to model a multi-story office building from scratch. We ll construct the base grid, create the two towers and place slabs between the stories. Also we
More informationTutorial for Lane County Mapping Applications
Tutorial for Lane County Mapping Applications Contents Overview... 2 Tools... 2 Navigation Tools... 3 Display Tools... 5 Information Tools... 6 Sharing Tools... 7 Common Tasks... 9 Identify or Show Data
More informationXnView Image Viewer. a ZOOMERS guide
XnView Image Viewer a ZOOMERS guide Introduction...2 Browser Mode... 5 Image View Mode...14 Printing... 22 Image Editing...26 Configuration... 34 Note that this guide is for XnView version 1.8. The current
More informationTable of Contents. iii
ToolBook Concepts Table of Contents Welcome... 1 The Interface... 3 The Main Window... 3 The Menu Bar... 3 The Tool Bar... 4 View Descriptions of Icons on the Tool Bar... 5 Move and Resize the Tool Bar...
More informationV-BOX Cloud Configuration
V-BOX Cloud Configuration Website: http://www.we-con.com.cn/en Technical Support: support@we-con.com.cn Skype: fcwkkj Phone: 86-591-87868869 QQ: 1043098682 Technical forum: http://wecon.freeforums.net/
More informationCS 465 Program 4: Modeller
CS 465 Program 4: Modeller out: 30 October 2004 due: 16 November 2004 1 Introduction In this assignment you will work on a simple 3D modelling system that uses simple primitives and curved surfaces organized
More informationDraw Guide. Chapter 3 Working with Objects and Object Points
Draw Guide Chapter 3 Working with Objects and Object Points Copyright This document is Copyright 2005 2011 by its contributors as listed below. You may distribute it and/or modify it under the terms of
More information