4) Click on Load Point Cloud to load the.czp file from Scene. Open Intersection_Demo.czp
|
|
- Austin Daniels
- 6 years ago
- Views:
Transcription
1 Intersection 3D Demo 1) Open the Crash Zone or Crime Zone diagram program. 2) Click on to open the CZ Point Cloud tool. 3) Click on 3D/Cloud Preferences. a) Set the Cloud File Units (Feet or Meters). b) These units should match the Export Units set Scene. c) Feet for this example. d) Un-Check Show Ground Plane (if checked). 4) Click on Load Point Cloud to load the.czp file from Scene. Open Intersection_Demo.czp NOTE: This example was previously saved with the ground level adjusted. For this example this step is not necessary but will be helpful for future work. 5) Ground Level Adjust to adjust the point cloud so the lowest point is at the ground plane (elevation of 0). The altimeter on the scanner sets the overall point cloud height. For drawing purposes it will be easier to have zero elevation. a) Click on Display Tools. b) Click on Elevation Adjust. c) Click on OK to make the adjustment. 6) Maximize Viewing When working with point clouds in CZ, it is best to view both CZ and the Point Cloud tool at the same time. If two (2) monitors are available, this can be done by placing CZ full screen on the left monitor and CZ Point Tool full screen on the right. When dual monitors are not an option: a) Move the mouse to the title bar of CZ. b) Click and hold the left mouse button.
2 c) Drag the cursor to the left edge of the computer s screen until a ripple effect occurs at the cursor. Ripple effect appears d) Release the cursor. e) Move the mouse to the title bar of CZ Point Cloud. f) Click and hold the left mouse button. g) Drag the cursor to the right edge of the computer s screen until a ripple effect occurs at the cursor. h) Release the cursor. 7) Before you start drawing in the point cloud it is a good idea to set the line type properties to a bright color and heavy line thickness so that it stands out from the point cloud. To do this: a) In the Tool Zone, click located under Properties b) Choose a color from the Color Palette c) Click d) Choose either 3 Medium or 5 Heavy Line thickness options
3 Road Edges 8) First, get an optimal view to draw the first road edge. Click on left most Iso View tool (1) and then use the Zoom Window tool (2) to zoom in closer. MOUSE NAVIGATION Freely modify the view with your mouse. a) Hold down the left mouse button and move the mouse to rotate the view clockwise and counter-clockwise as well as change the vertical angle of the view. b) Roll the mouse wheel to zoom in and out. c) Hold down the mouse wheel to pan. 9) In the CZ Point Cloud tool click on the Single Line tool. Click on Pt 1 and then Pt 2 in the point cloud. DELTA Z: While drawing the line watch the Delta Z value. In this example there is approximately a one foot change in elevation between Point 1 and Point 2. The Delta Z value is the change in elevation from the last point placed to the next point (cursor location). If you see a drastic change in elevation it may be due to the cursor being on an erroneous point.
4 ERROR HANDLING a) While drawing a continuous line, curve, or arc you can UNDO the last point selection by pressing the ESC key. b) If you complete the placement of an object in error, you can click on the UNDO tool in the diagram program. c) You can ERASE unwanted objects in the drawing by selecting them and pressing the DEL key. 10) In the CZ Point Cloud tool click on the 3pt Arc tool. Snap to Pt 2, Pt 3, and Pt 4 in the point cloud. Snap to Pt 2 at the end of the last line placed in the 2D diagram. NOTE: You can only snap to cloud points in the CZ Point Cloud tool. Snap to actual drawing entities in the 2D drawing window.
5 11) In the CZ Point Cloud tool click on the Single Line and then Pt 6 in the point cloud. tool. Click on Pt 5 12) In the CZ Point Cloud tool click on the 3pt Arc tool. Snap to Pt 6, Pt 7, and Pt 8 in the point cloud. Snap to Pt 6 at the end of the last line placed in the 2D diagram. 13) Draw the double yellow centerline. a) Draw a Single Line starting from the center of the double yellow line Pt 9 to Pt 10. b) Click on the line just drawn in the diagram to select it. c) Click on the Reset Properties tool.
6 d) With the line still selected, click on the Line Type properties button, then click on Center Lines, and then the Double Solid line type. You can select any line, arc, or curve and change it to a custom line type. PLACING SYMBOLS IN THE POINT CLOUD a) Clicking on a 3D point will set the elevation of a symbol. b) You can click on a point cloud point directly when placing a symbol or you can place a Point diagram window. in the cloud and click on that same point in the 2D FLIP Z (F key = keyboard shortcut)
7 Using the Flip Z tool, you can turn the whole point cloud environment upside down. From underneath it s easier to place point at location of a symbol. 14) Place the Stop Sign symbol. a) Turn Flip Z ON. SEEK (S key = keyboard shortcut) Set the focus of all the navigation and zoom tools on a specific location in the cloud using the Seek tool. a) Turn the Seek tool ON. b) Click on the base of the Stop sign in the cloud.
8 Any navigation or zooming you do will be focused around the Seek point you selected. Click on Seek again to turn it off. c) Place a Point at the base of the stop sign. d) Click on Flip Z to turn it off and set the ground orientation to normal. e) Open up the Crash symbols group. f) Select the _sign Stop symbol. Signs>General>_sign Stop g) Place the first symbol point on the stop sign base point. Rotate and click the final point symbol point.
9 h) Adjust the height of the Stop Sign symbol to match the actual height in the point cloud. It s apparent that the stop sign symbol is much higher than the actual sign. Select the Stop Sign symbol in the diagram window. i) Click on the 3D Builder tool on the Speedbar. j) Enter a Symbol Height of 8. 15) Draw the power lines across the roadway. a) Make the power lines stand out more by increasing the Pt. Size.
10 b) Use the Curve tool to trace the power lines. c) Angle the view so it s clear behind the power lines so you don t actually click on a point other than the power line. 16) Place and align a vehicle in the ditch. To align a symbol to a surface you use the 3D Symbol Align (to Plane) tool. This tool is located on the 3D Recon Animate menu or the right click mouse menu when you right click on a selected symbol.
11 NOTE: To align a symbol to a plane you need a surface you can click on, one that s created with the Surface tools, or three points you can snap to. In this example you will place three points in the ditch that define the place of the vehicle in the ditch. a) Place three points in the ditch near the location of three of the vehicles wheels. b) Place a vehicle in the ditch. c) Changing the view in the cloud will show that the vehicle isn t aligned at this point. d) Select the vehicle symbol in the diagram.
12 e) Right click your mouse and click on 3D Symbol Align (to Plane). f) Snap to each of the three points. Click OK when the Symbol aligned message pops up. g) The vehicle symbol will align to the selected points in 3D.
Cad Zone Point Cloud. Intro
Cad Zone Point Cloud Intro What is a point cloud? It s potentially millions of points captured at a scene using a laser scanner or a photogrammetric system. The point cloud gives you a complete and accurate
More informationVersion 10 Addendum to the User s Manual
Version 10 Addendum to the User s Manual Introduction to Version 10 This latest release of the diagram program boasts improved productivity via the new user interface, real-time 3D, a new 3D rendering
More informationQuick Crash Scene Tutorial
Quick Crash Scene Tutorial With Crash Zone or Crime Zone, even new users can create a quick crash scene diagram in less than 10 minutes! In this tutorial we ll show how to use Crash Zone s unique features
More informationCADZONE Application Workflow SCENE5.1 & CAD Zone: Capturing Data to Diagram Preparation
CADZONE Application Workflow SCENE5.1 & CAD Zone: Capturing Data to Diagram Preparation Table of Contents Application Description...5 Required Materials...5 Focus 3D Setup...6 Plan the Scan...7 Target
More informationThis is the opening view of blender.
This is the opening view of blender. Note that interacting with Blender is a little different from other programs that you may be used to. For example, left clicking won t select objects on the scene,
More informationWelcome to Easy Plan 5.0!
Welcome to 5.0! This manual introduces you to, a drawing program for creating pre fire and site diagrams. It explains how to get help with the program, program basic concepts, and includes a basic tutorial
More informationFrequently Asked Questions
Frequently Asked Questions FAQ Sections FAQ Sections... 1 General Questions about FARO Zone 3D... 2 Q. What makes FARO Zone 3D different from other drawing or CAD programs?... 2 Q. What is the difference
More informationPanasonic VRF Software. New features of VRF software
Panasonic VRF Software New features of VRF software April 2013 1 Contents: Mounting scheme... 5 1. Import building scheme into software... 5 1.1. Export building scheme as DXF from AutoCAD... 5 1.2. Export
More informationRevit - Conceptual Mass. STEP 1: open Revit _ from the home screen under Families click on New Conceptual Mass _ open the Mass template file
Revit - Conceptual Mass STEP 1: open Revit _ from the home screen under Families click on New Conceptual Mass _ open the Mass template file STEP 2: type LL to create a new level _ enter 100 _ create 2
More informationPAGE TITLE KEYBOARD SHORTCUTS
PAGE TITLE KEYBOARD SHORTCUTS DEFAULT KEYBOARD SHORTCUTS MARKUP Align Bottom Ctrl + Alt + B Align Center Ctrl + Alt + E Align Left Ctrl + Alt + L Align Middle Ctrl + Alt + M Align Right Ctrl + Alt + R
More informationQuick Scene 5. Crash Scene Diagrams in 5 Minutes! The CAD Zone, Inc All rights reserved.
5 Crash Scene Diagrams in 5 Minutes! The CAD Zone, Inc. 2013 All rights reserved. 800 641 9077 www.cadzone.com Page 1 800 641 9077 www.cadzone.com Page 2 Welcome to! This manual introduces you to, a drawing
More informationExercise Guide. Published: August MecSoft Corpotation
VisualCAD Exercise Guide Published: August 2018 MecSoft Corpotation Copyright 1998-2018 VisualCAD 2018 Exercise Guide by Mecsoft Corporation User Notes: Contents 2 Table of Contents About this Guide 4
More informationThe Villa Savoye ( ), Poisy, Paris.
Learning SketchUp Villa Savoye This tutorial will involve modeling the Villa Savoye by Le Corbusier Files needed to complete this tutorial are available in Mr. Cochran s Web Site The Villa Savoye (1929-1931),
More informationDigital City: Introduction to 3D modeling
Digital City: Introduction to 3D modeling Weixuan Li, 2017 PART I: Install SketchUp and Introduction 1. Download SketchUp Download SketchUp from their official website: https://www.sketchup.com Go to the
More informationK e y b o a r d s h o rt c ut s
Keyboard shortcuts Mouse navigation Middle button (wheel) Click + drag = pan Double-click = re-center view Left button Click = tool operation Click + spacebar = pan Shift + click + drag = multi-select
More informationPhotocopiable/digital resources may only be copied by the purchasing institution on a single site and for their own use ZigZag Education, 2013
SketchUp Level of Difficulty Time Approximately 15 20 minutes Photocopiable/digital resources may only be copied by the purchasing institution on a single site and for their own use ZigZag Education, 2013
More informationUndo Button Clicking this tool will undo the last action. Clicking on this tool multiple times will undo all subsequent changes that were made.
SMS Featured Icons: Editor Window This document includes a brief description of the tools in the SMS Desktop Software Editor windows, as well as showing you the toolbar shortcuts to easily access these
More informationReset Cursor Tool Clicking on the Reset Cursor tool will clear all map and tool selections and allow tooltips to be displayed.
SMS Featured Icons: Mapping Toolbar This document includes a brief description of some of the most commonly used tools in the SMS Desktop Software map window toolbar as well as shows you the toolbar shortcuts
More informationBeginning Paint 3D A Step by Step Tutorial. By Len Nasman
A Step by Step Tutorial By Len Nasman Table of Contents Introduction... 3 The Paint 3D User Interface...4 Creating 2D Shapes...5 Drawing Lines with Paint 3D...6 Straight Lines...6 Multi-Point Curves...6
More informationThis lesson introduces Blender, covering the tools and concepts necessary to set up a minimal scene in virtual 3D space.
3D Modeling with Blender: 01. Blender Basics Overview This lesson introduces Blender, covering the tools and concepts necessary to set up a minimal scene in virtual 3D space. Concepts Covered Blender s
More informationSolidWorks 2½D Parts
SolidWorks 2½D Parts IDeATe Laser Micro Part 1b Dave Touretzky and Susan Finger 1. Create a new part In this lab, you ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select
More information3ds Max Cottage Step 1. Always start out by setting up units: We re going with this setup as we will round everything off to one inch.
3ds Max Cottage Step 1 Always start out by setting up units: We re going with this setup as we will round everything off to one inch. File/Import the CAD drawing Be sure Files of Type is set to all formats
More informationVisual 2012 Help Index
Visual 2012 Help Index Absolute Coordinates 2.1 Cartesian Coordinates Aim 7.4.3 Place and Aim Luminaires 7.4.4 Reaiming Luminaires Align Cursor and Plane to Current View 9.6 Align to View Align Cursor
More informationSOLIDWORKS 2017 Keyboard Modifiers & Shortcuts
SOLIDWORKS 2017 Keyboard Modifiers & Shortcuts Copy/Paste Ctrl+C and Ctrl+V These are similar in functionality to Windows. Sketches Copies and pastes sketch entities. Part Copies and pastes sketches. Assemblies
More informationSolidWorks Intro Part 1b
SolidWorks Intro Part 1b Dave Touretzky and Susan Finger 1. Create a new part We ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select File New Templates IPSpart If the SolidWorks
More informationMouse Navigation. Middle Button (wheel) Pan. Click + Drag. Re-Center View. Double-Click. Context Menu. Tool Operation. Click. Click. Multi-Select.
BLUEBEAM REVU KEYBOARD SHORTCUTS Mouse Navigation Middle Button (wheel) Pan Re-Center View Click + Drag Double-Click Left Button Right Button Tool Operation Click Context Menu Click Pan Click + Spacebar
More informationLuana Valentini InternetGIS course
Google SketchUp - A brief introduction - Luana Valentini InternetGIS course - 2011 Create 3D models and share them with the world Google SketchUp is software that allows you to create 3D models of anything
More informationXPEL DAP SUPPORT. DAP Tool List & Overview DESCRIPTION ICON/TOOL (SHORTCUT)
Pointer (S) Left-click on individual entities to add them to the current selection (selected entities will turn red). If the entity selected is a member of a group, the entire group will be added to the
More informationModeling a Gear Standard Tools, Surface Tools Solid Tool View, Trackball, Show-Hide Snaps Window 1-1
Modeling a Gear This tutorial describes how to create a toothed gear. It combines using wireframe, solid, and surface modeling together to create a part. The model was created in standard units. To begin,
More informationStickFont Editor v1.01 User Manual. Copyright 2012 NCPlot Software LLC
StickFont Editor v1.01 User Manual Copyright 2012 NCPlot Software LLC StickFont Editor Manual Table of Contents Welcome... 1 Registering StickFont Editor... 3 Getting Started... 5 Getting Started...
More informationAdjust model for 3D Printing. Positioning - Orientate the part 13,0600,1489,1604(SP6)
Adjust model for 3D Printing 13,0600,1489,1604(SP6) In this document, we will learn about. Position and Orientate a Body means that we move and rotate the body to fit our 3D printing considerations. Typical
More information4. If you are prompted to enable hardware acceleration to improve performance, click
Exercise 1a: Creating new points ArcGIS 10 Complexity: Beginner Data Requirement: ArcGIS Tutorial Data Setup About creating new points In this exercise, you will use an aerial photograph to create a new
More informationBasic Modeling 1 Tekla Structures 12.0 Basic Training September 19, 2006
Tekla Structures 12.0 Basic Training September 19, 2006 Copyright 2006 Tekla Corporation Contents Contents 3 1 5 1.1 Start Tekla Structures 6 1.2 Create a New Model BasicModel1 7 1.3 Create Grids 10 1.4
More informationGETTING STARTED WITH SKETCHUP
MENUS TOOLBARS GETTING STARTED WITH SKETCHUP When opening a new document the image will likely look like this. Familiarize yourself with the options available in the program. Additional toolbars can be
More informationParametric Modeling with. Autodesk Fusion 360. First Edition. Randy H. Shih SDC. Better Textbooks. Lower Prices.
Parametric Modeling with Autodesk Fusion 360 First Edition Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
More informationArchitectural items bin. Piping bin PractiCAD. Work box
MetaLab Screen Overview Menu Fittings bin Architectural items bin AutoCAD tools Model space Reports bin Ultimatics bin Tags bin Automatics bin Command promt Piping bin PractiCAD tools Screen Overview Toolbars
More informationDevelopment Authority of the North Country (DANC) Internet Mapping Application Instructions Public Viewer 1. Purpose. 2. Logging-in. 3.
Development Authority of the North Country (DANC) Internet Mapping Application Instructions Public Viewer 1. Purpose The purpose of this document is to outline basic functionality of the DANC Internet
More informationSketchUp Tool Basics
SketchUp Tool Basics Open SketchUp Click the Start Button Click All Programs Open SketchUp Scroll Down to the SketchUp 2013 folder Click on the folder to open. Click on SketchUp. Set Up SketchUp (look
More informationPress the Plus + key to zoom in. Press the Minus - key to zoom out. Scroll the mouse wheel away from you to zoom in; towards you to zoom out.
Navigate Around the Map Interactive maps provide many choices for displaying information, searching for more details, and moving around the map. Most navigation uses the mouse, but at times you may also
More informationDESCRIPTION. Allows you to copy items selected. Allows you to paste items in virtual clipboard. Deletes selected items.
Pointer/Selector tool Allows you to select an entity. Left click to select (item will turn red), right click to unselect. Zoom Rotate (R) Drag a box around what you would like to zoom into. Right click
More informationUsing the Markup Commands
Using SoftPlan review 1 Using the Markup Commands The Markup menu supplies various commands that allow you to add changes, comments, and suggestions to a drawing or to specific areas of a drawing. To open
More informationPictometry for ArcGIS Desktop Local Guide For ArcGIS Desktop Version 10
Pictometry for ArcGIS Desktop Local Guide For ArcGIS Desktop Version 10 September 2013 Copyright 2010-2013 Pictometry International Corp. All rights reserved. No part of this publication may be reproduced,
More informationA Guide to Autodesk Maya 2015
A Guide to Autodesk Maya 2015 Written by Mitchell Youngerman Table of Contents Layout of Toolbars...pg 1 Creating Objects...pg 2 Selecting & Deselecting Objects...pg 3 Changing Perspective... pg 4 Transforming
More informationSecurity Management System Object Counting
Security Management System Object Counting This document describes the steps for using the Object Counting module available in the Security Management System software. (A) Object Counting Configuration
More informationIn this exercise, you will convert labels into geodatabase annotation so you can edit the text features.
Instructions: Use the provided data stored in a USB. For the report: 1. Start a new word document. 2. Follow an exercise step as given below. 3. Describe what you did in that step in the word document
More informationHow to...create a Video VBOX Gauge in Inkscape. So you want to create your own gauge? How about a transparent background for those text elements?
BASIC GAUGE CREATION The Video VBox setup software is capable of using many different image formats for gauge backgrounds, static images, or logos, including Bitmaps, JPEGs, or PNG s. When the software
More informationTutorial 3: Constructive Editing (2D-CAD)
(2D-CAD) The editing done up to now is not much different from the normal drawing board techniques. This section deals with commands to copy items we have already drawn, to move them and to make multiple
More informationPhotogrammetry Guide to Creating Digital 3D Models
Photogrammetry Guide to Creating Digital 3D Models By Emily Hauf (SUNY Geneseo) and the Paleontological Research Institution Guide Version 1.0 Part I - Photography Create studio setup with black cloth
More informationMaya Lesson 3 Temple Base & Columns
Maya Lesson 3 Temple Base & Columns Make a new Folder inside your Computer Animation Folder and name it: Temple Save using Save As, and select Incremental Save, with 5 Saves. Name: Lesson3Temple YourName.ma
More informationVectorworks Essential Tutorial Manual by Jonathan Pickup. Sample
Vectorworks Essential Tutorial Manual by Jonathan Pickup Table of Contents 0.0 Introduction... iii 0.1 How to Use this Manual... iv 0.2 Real World Sizes... iv 0.3 New Ways of Drawing... v 1.0 Introduction
More informationSketchUp. SketchUp. Google SketchUp. Using SketchUp. The Tool Set
Google Google is a 3D Modelling program which specialises in making computer generated representations of real-world objects, especially architectural, mechanical and building components, such as windows,
More informationExcerpt from "Inside CorelCAD" - Windows edition To purchase the full book, please go to
chapter 3 CAD Concepts 37 1. Start any drawing command, such as Line. : line Specify start point» (Move cursor.) 2. Right-click the coordinate field. Notice the short cut menu. 3. Choose Relative. (The
More information1 In the Mini Window Editor, double-click phase 1 (GF-Wall-External) to make it current:
1 This Quick Start tutorial introduces you to the basics of creating an intelligent drawing using the BIM components supplied with MicroGDS 2010. Here we demonstrate how to construct the external walls
More informationThe principles of CCTV design in VideoCAD
The principles of CCTV design in VideoCAD By Stanislav Utochkin, cctvcad.com CCTV focus readers have already had an opportunity to read about VideoCAD in the past issues. This is the only specialised program
More informationNURBS modeling for Windows. Training Manual Level 1
NURBS modeling for Windows Training Manual Level 1 Rhino Level 1 Training 2nd Ed.doc Robert McNeel & Associates 1997-2000 All Rights Reserved. Printed in U.S.A. Copyright by Robert McNeel & Associates.
More informationLIGHTCONVERSE TOOLS Interface Overview
MANUAL 1 Contents Contents... 1 LIGHTCONVERSE TOOLS Interface Overview... 2 Tool Manager... 3 Mouse... 4 Mouse Control Operation:... 4 3D Space Area... 4 Modes... 5 Balance Calculator in Warehouse Mode...
More informationLESSON 2 MODELING BASICS
LESSON 2 MODELING BASICS In this lesson we ll start to model a multi-story office building from scratch. We ll construct the base grid, create the two towers and place slabs between the stories. Also we
More informationPictometry for ArcGIS Desktop Local Guide For ArcGIS Desktop Version 10.3
for ArcGIS Desktop Local Guide For ArcGIS Desktop Version 10.3 June 2015 Copyright 2010-2015 International Corp. All rights reserved. No part of this publication may be reproduced, stored in a retrieval
More informationScreenshots related to release of Panasonic VRF v New indoor unit models and also fixed indoor unit calculations in case of ECOi systems
Screenshots related to release of Panasonic VRF v7.16.0 New indoor unit models and also fixed indoor unit calculations in case of ECOi systems Same system but mounting scheme Calculations of SCOP/SEER
More informationGetting Started with ShowcaseChapter1:
Chapter 1 Getting Started with ShowcaseChapter1: In this chapter, you learn the purpose of Autodesk Showcase, about its interface, and how to import geometry and adjust imported geometry. Objectives After
More informationRhinoceros NURBS modeling for Windows. Version 1.0 Training Manual Level 1
Rhinoceros NURBS modeling for Windows Version 1.0 Training Manual Level 1 rhinolevel 1.doc Robert McNeel & Associates 1997. All Rights Reserved. Printed in U.S.A. Copyright by Robert McNeel & Associates.
More informationPremiere Pro Desktop Layout (NeaseTV 2015 Layout)
Premiere Pro 2015 1. Contextually Sensitive Windows - Must be on the correct window in order to do some tasks 2. Contextually Sensitive Menus 3. 1 zillion ways to do something. No 2 people will do everything
More informationFrom Chrome or Firefox browser, Open Google.com/MyMaps (You must log-in to a Google account)
DETAILED INSTRUCTIONS FOR GTFS BUILDER CREATING SHAPES DISPLAYED IN GOOGLE TRANSIT (see last page for quick guide/summary or short videos found here /supportcenter/builder-apps/gtfs-builder/advanced-topics
More informationForensic Mapping Using CAD Zone
[Type the document title] Student Manual Basic and Intermediate Training Forensic Mapping Using CAD Zone For Version 9 Crash Zone & Crime Zone In the course, Forensic Mapping using CAD Zone, the student
More informationUser Guide. for. JewelCAD Professional Version 2.0
User Guide Page 1 of 121 User Guide for JewelCAD Professional Version 2.0-1 - User Guide Page 2 of 121 Table of Content 1. Introduction... 7 1.1. Purpose of this document... 7 2. Launch JewelCAD Professional
More informationsolidthinking Environment...1 Modeling Views...5 Console...13 Selecting Objects...15 Working Modes...19 World Browser...25 Construction Tree...
Copyright 1993-2009 solidthinking, Inc. All rights reserved. solidthinking and renderthinking are trademarks of solidthinking, Inc. All other trademarks or service marks are the property of their respective
More informationChair. Top Rail. on the Standard Views toolbar. (Ctrl-7) on the Weldments toolbar. at bottom left corner of display to deter- mine sketch plane.
Chapter 7 A. 3D Sketch. Step 1. If necessary, open your CHAIR file. Chair Top Rail Step 2. Click Isometric on the Standard Views toolbar. (Ctrl-7) Step 3. Zoom in around top of back leg, Fig. 1. To zoom,
More informationR2CAD User Guide V1.7. Copyright All rights reserved.
R2CAD User Guide V1.7 Copyright All rights reserved. Table of Contents 1. About R2CAD... 1 1.1 System Requirements... 1 2. User Interface... 2 2.1 Main menu... 2 2.2 Mouse Operation... 2 2.3 Setting...
More informationAutodesk Moldflow Insight AMI User Interface
Autodesk Moldflow Insight 2012 AMI User Interface Revision 1, 18 March 2012. This document contains Autodesk and third-party software license agreements/notices and/or additional terms and conditions for
More informationUser Interface Guide
User Interface Guide 1 Contents Overview... 3 Tabmenu... 4 Design modes... 4 Tool groups... 5 Design function groups... 5 Main menu... 6 Toolbars... 7 Drawing area... 9 Status bar... 11 Coordinate box...
More informationWorking with Plan Production ObjectsChapter1:
Chapter 1 Working with Plan Production ObjectsChapter1: The lessons in this chapter guide you through the processes of creating and working with plan production objects. Plan production objects include
More informationA Quick Spin on Autodesk Architectural Studio
December 2-5, 2003 MGM Grand Hotel Las Vegas A Quick Spin on Autodesk Architectural Studio Mario Guttman, AIA Kevin Durham Christie Landry (Instructor) (Assistant) (Assistant) BD13-5L Autodesk Architectural
More informationBeaumont Middle School Design Project April May 2014 Carl Lee and Craig Schroeder
Beaumont Middle School Design Project April May 2014 Carl Lee and Craig Schroeder 1 2 SketchUp 1. SketchUp is free, and you can download it from the website www.sketchup.com. For some K12 use, see www.sketchup.com/3dfor/k12-education.
More informationSketchUp: an Overview. By Norm Berls
SketchUp: an Overview By Norm Berls Objectives and Non-Objectives Introduction to the SketchUp mindset. Highlights Best Practices Pitfalls Not a Class Won t cover every aspect Hardware Toshiba laptop S70B
More informationVizit Pro User Manual
Vizit Pro User Manual 1 Table of Contents Vizit Pro User Manual... 1 Using Vizit Pro... 3 The Vizit Pro User Interface... 3 Toolbars... 4 File Tab Toolbar... 4 Edit Tab Toolbar... 5 Annotations Tab Toolbar...
More informationAcrobat X Professional
Acrobat X Professional Toolbar Well Page Navigations/Page Indicator Buttons for paging through document Scroll Bar/box page indicator appears when using the scroll button to navigate. When you release
More informationCase Study 1: Piezoelectric Rectangular Plate
Case Study 1: Piezoelectric Rectangular Plate PROBLEM - 3D Rectangular Plate, k31 Mode, PZT4, 40mm x 6mm x 1mm GOAL Evaluate the operation of a piezoelectric rectangular plate having electrodes in the
More informationAppendix B Import (CAD Transfer) Mode Keyboard Shortcuts
Import (CAD Transfer) Mode Keyboard Shortcuts Mode-Changing Keys E F H W V P Switch to Edit mode (press twice for Entry mode) Switch to Profile View mode Switch to Highway mode (if available) Switch to
More informationTechnique or Feature Where Introduced
Part 6: Keypad 4 Mirrored features Patterned features First extrusion Rounded corners In the earpiece part, you defined a radial pattern, one that created new instances of a feature at intervals around
More informationto display both cabinets. You screen should now appear as follows:
Technical Support Bulletin: AllenCAD Tutorial Last Updated November 12, 2005 Abstract: This tutorial demonstrates most of the features of AllenCAD necessary to design or modify a countertop using the program.
More informationA QUICK TOUR OF ADOBE ILLUSTRATOR CC (2018 RELEASE)
A QUICK TOUR OF ADOBE ILLUSTRATOR CC (2018 RELEASE) Lesson overview In this interactive demonstration of Adobe Illustrator CC (2018 release), you ll get an overview of the main features of the application.
More informationPrimal s 3D Real-time on Anatomy.tv
USER GUIDE Primal s 3D Real-time on Anatomy.tv Welcome to our user guide to 3D Real-time on Anatomy.tv. Please read on, or select one of the links opposite to jump straight to a particular topic. Anatomy.tv
More informationLAB # 2 3D Modeling, Properties Commands & Attributes
COMSATS Institute of Information Technology Electrical Engineering Department (Islamabad Campus) LAB # 2 3D Modeling, Properties Commands & Attributes Designed by Syed Muzahir Abbas 1 1. Overview of the
More informationUSING THE TRIBALL FOR POSITIONING
USING THE TRIBALL FOR POSITIONING Although many important positioning tools are available, none are as versatile as the TriBall tool. This TriBall tool offers complete repositioning of many items: Shapes
More informationWizard PDS. Automated Perimeter Definition System. January Education and Training Center Wizard Date 5/4/2016. Page 1
PDS Automated Perimeter Definition System January 2016 Page 1 Table of Contents Information Page 3 O Page 32 Operating Procedures Basic Operation Manually Reposition a Truss Snap to Rail Centerline Flip
More informationReference Image. Source:
Mesh Modeling By Immer Baldos This document is a tutorial on mesh modeling using Blender version 2.49b. The goal is to create a model of an elevator. This tutorial will tackle creating the elevator cart,
More informationQuickTutor. An Introductory SilverScreen Modeling Tutorial. Solid Modeler
QuickTutor An Introductory SilverScreen Modeling Tutorial Solid Modeler TM Copyright Copyright 2005 by Schroff Development Corporation, Shawnee-Mission, Kansas, United States of America. All rights reserved.
More informationUSER GUIDE ikdesign V1.1. Advanced software for Inflatable kite design
USER GUIDE ikdesign V1.1 Advanced software for Inflatable kite design http://perso.orange.fr/ikdesign/ User guide, ikdesign v1.1. September 4, 2007. Thanks to Laure Gicquel for the correction. ikdesign
More informationDesigning a track in Adams/Car:
Warning: Remember to change your working directory before you begin this lesson. If you do not, Adams may not work correctly. Also remember to move everything you wish to keep from the working directory
More informationCO 2 Shell Car. Body. in the Feature Manager and click Sketch from the context toolbar, Fig. 1. on the Standard Views toolbar.
CO 2 Shell Car Chapter 2 Body A. Save as "BODY". Step 1. If necessary, open your BLANK file. Step 2. Click File Menu > Save As. Step 3. Key-in BODY for the filename and press ENTER. B. FRONT Wheel Shell.
More informationToon Boom Harmony Essentials V15.0
Essentials Toon Boom Harmony Essentials V15.0 Keyboard Shortcuts Guide TOON BOOM ANIMATION INC. 4200 Saint-Laurent, Suite 1020 Montreal, Quebec, Canada H2W 2R2 +1 514 278 8666 contact@toonboom.com toonboom.com
More informationToon Boom Harmony Essentials 16.0
Essentials Toon Boom Harmony Essentials 16.0 Keyboard Shortcuts TOON BOOM ANIMATION INC. 4200 Saint-Laurent, Suite 1020 Montreal, Quebec, Canada H2W 2R2 +1 514 278 8666 contact@toonboom.com toonboom.com
More informationChapter 10 - Tools. Visual includes various tools to provide design aids, system setting control, and other functions.
Chapter 10 - Tools Visual includes various tools to provide design aids, system setting control, and other functions. 10.1 Customize Dialog The Customize dialog allows advanced users to have control of
More informationOsmond Tutorial. First Page / J C Chavez / / Osmond Tutorial
Osmond Tutorial Draft Version corresponding to Osmond PCB Design Version 1.0b2 November 30, 2002 J C Chavez http://www.swcp.com/~jchavez/osmond.html jchavez@swcp.com First Page / J C Chavez / jchavez@swcp.com
More informationAUTODESK FUSION 360 Designing a RC Car Body
AUTODESK FUSION 360 Designing a RC Car Body Abstract This project explores how to use the sculpting tools available in Autodesk Fusion 360 Ultimate to design the body of a RC car. John Helfen john.helfen@autodesk.com
More informationPhotocopiable/digital resources may only be copied by the purchasing institution on a single site and for their own use ZigZag Education, 2013
SketchUp Level of Difficulty Time Approximately 15 20 minutes Photocopiable/digital resources may only be copied by the purchasing institution on a single site and for their own use ZigZag Education, 2013
More informationRoadway Alignments and Profiles
NOTES Module 15 Roadway Alignments and Profiles In this module, you learn how to create horizontal alignments, surface profiles, layout (design) profiles, and profile views in AutoCAD Civil 3D. This module
More informationEdupen Pro User Manual
Edupen Pro User Manual (software for interactive LCD/LED displays and monitors) Ver. 3 www.ahatouch.com Some services in Edupen Pro require dual touch capability. In order to use dual touch, your computer
More informationTutorial 3: Using the Waveform Viewer Introduces the basics of using the waveform viewer. Read Tutorial SIMPLIS Tutorials SIMPLIS provide a range of t
Tutorials Introductory Tutorials These tutorials are designed to give new users a basic understanding of how to use SIMetrix and SIMetrix/SIMPLIS. Tutorial 1: Getting Started Guides you through getting
More informationChapter 12: Pull Toy - Solids and Transforms
This tutorial demonstrates using solid primitives and simple transforms. You will learn how to: Enter coordinates to place points exactly. Draw a free-form curve and polygon. Create a pipe along a curve.
More information