Traversing mechanism. 1D, 2D and 3D traversing system. Applications. Features
|
|
- Elizabeth Lucas
- 5 years ago
- Views:
Transcription
1 1D, 2D and 3D traversing system Applications Computer controlled positioning of DA/PDA, PIV or CTA precision measurement equipment Volume mapping PIV Computer controlled positioning of small flow rigs Computer controlled positioning of spray nozzles for PDA measurements Features Rigid construction with step-motor driven high precision lead screws integrated in all traverse units Improved bearings with high load capacity Electrical limit switches in all units Automatic control integrated in Dantec Dynamics application software igh resolution Description The Dantec Dynamics traversing system combines automated, high resolution positioning with a mechanical solution adapted to the DA, PDA, CTA and PIV measuring system. ith the point measurement techniques DA, PDA and CTA, automated positioning makes it possible to map the flow either by moving the measurement device or the flow rig along a line, in a plane or in a volume. PIV systems already measure in a plane, and a traversing system makes it possible to make volume mapping by traversing perpendicularly to the measurement plane. By traversing in a plane parallel to the measurement plane, a larger area of the flow can be accessed.
2 1D traversing mechanism 1D Traversing mechanism Range Dimensions Max oad Mx 340 Nm ift capacity 170 Nm Included Mounting plate for Dantec Dynamics bench profile or Probe support range 1D Traversing mechanism Model 9041T T T313 range than listed can be delivered on request.
3 2D traversing mechanism 2D Traversing mechanism Range range Dimensions Max oad Mx 175 Nm range 340 Nm ift capacity Included Electromagnetic brake built-in the vertical traverse unit Mounting plate for Dantec Dynamics bench profile or Probe support denotes horizontal direction, denotes vertical direction. 2D Traversing mechanism Model range range 9041T T T than listed can be delivered on request
4 3D traversing mechanism 3D Traversing mechanism Range range Dimensions range Max oad Mx 175 Nm 340 Nm ift capacity Included Electromagnetic brake built-in the vertical traverse unit range Mounting plate for Dantec Dynamics bench profile or Probe support and denotes horizontal direction, denotes vertical direction. 3D Traversing mechanism Model range range range 9041T T T than listed can be delivered on request
5 Controller Number of motor power modules ine voltage Mains supply Interface Dimensions D 2 or VAC z Detachable standard mains cable RS232 and USB 475 x 188 x 410 Included Motor cable - 5 meter Null modem Cable 3 meter Emergency stop including cable - 5 meter Model 9041T T019 Description 2D traversing controller VAC, z 3D traversing controller VAC, z Publication No.: pi_193_v10 Dantec Dynamics undertakes a continuous and intensive product development prograe to ensure that its instruments perform to the highest technical standards. As a result the specifications in this document are subject to change without notice.
Motorized Linear Slides. EZS Series SPF Series SPR Series SPV Series. EZS Series Without Electromagnetic Brake Stroke 300 mm
Motorized Linear Slides EZS Series SPF Series SPR Series SPV Series EZS Series Without Electromagnetic Brake Stroke 0 mm 2 Overview Selection EZS Series SPF Series SPR Series SPV Series EZS/SPF/SPR/SPV
More informationSpraying device LD/U2E Arc spraying. Parts List PL EN 02
Arc spraying Parts List PL 9697 EN 02 Oerlikon Metco 6/2015 Oerlikon Metco AG Switzerland Rigackerstrasse 16 CH-5610 Wohlen +1 56 618 81 81 +1 56 618 81 00 www.oerlikon.com/metco i Warranty Disclaimer
More informationReasonable Price. Comparison of Number of Components
Significantly Reduced Man-Hours and Required for Design The compact body houses the entire linear motion mechanism. The use of conventional internally-produced parts is no longer required, thus reducing
More informationGenesis MX STM-Series
Genesis MX STM-Series TEM00 Visible OEM and End-User OPS Laser Systems Applications like Flow Cytometry, Particle Counting, DNA Sequencing and Microscopy are enable by low noise, visible true CW lasers.
More informationNV disconnectors with fuses
NV disconnectors with fuses Horizontal fuse-switch disconnector type HVL size 00,, 2, and 4a Description Horizontal fuse-switch disconnector type HVL are designed to be used in most demanding fields of
More informationMPS-GR Series. Mechanical-Bearing, Worm-Driven Rotary Stage. Low profile and compact with aperture. Precision worm-gear drive
Rotary Stages Mechanical-Bearing, Worm-Driven Rotary Stage Low profile and compact with aperture Precision worm-gear drive DC servo or stepper motor Continuous 360 rotary positioning Graduated tabletop
More informationRUC industrial relays of small dimensions
RUC industrial relays of small dimensions 135 with adaptor (V) Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching
More informationH Precitech, Inc. Microfinish ϑ 300 CNC ASPHERIC LENS POLISHING MACHINE MACHINE SPECIFICATION REVISION 6. Page 1 of 5
H05941 Microfinish ϑ 300 CNC ASPHERIC LENS POLISHING MACHINE MACHINE SPECIFICATION REVISION 6 Page 1 of 5 1 MACHINE DESCRIPTION The Microfinish 300 is a CNC machine designed for the rapid polishing and
More informationTTA Series. Tabletop Robot. ZR-Axis Type Series Added
GB Tabletop Robot TTA Series ZR-Axis Series Added www.intelligentactuator.de mproved Tabletop Robot for Cell Production Applications. Featuring Significantly Higher Payload, Maximum Speed and Rigidity!
More informationFresnel Reflection. angle of transmission. Snell s law relates these according to the
Fresnel Reflection 1. Reflectivity of polarized light The reflection of a polarized beam of light from a dielectric material such as air/glass was described by Augustin Jean Fresnel in 1823. While his
More informationHandout. and. brief description. Marine Gravity Meter KSS 32- M
and brief description of Marine Gravity Meter KSS 32- M Copyright 1999-2010 Bodensee Gravitymeter Geosystem GmbH All rights reserved 1 KSS32-M Marine Gravity Meter Cover removed Copyright 1999-2010 Bodensee
More informationMPS75SLE. Miniature Mechanical-Bearing Screw-Driven Linear Stage with Linear Feedback. Compact stage with travels to 100 mm
MPSSLE Miniature Mechanical-Bearing Screw-Driven Linear Stage with Linear Feedback Compact stage with travels to 0 mm Low-thermal expansion glass-scale linear encoder Precision-ground ball-screw drive
More informationRS-FS-N01 Wind speed transmitter user's Guide (485type)
RS-FS-N01 Wind speed transmitter user's Guide (485type) Issue: V1.0 1 2 Context 1. Introduction... 4 2. Installation instructions...5 3. Configure the software installation and use... 6 4. Communication
More informationE-220. Compact Linear Actuators DRL Series. Features High Positioning Accuracy E-220
E-220 Compact For details on these products please refer to our website or contact your nearest Oriental Motor sales office. For detailed information about regulations and standards, please see the Oriental
More informationBGS Motorized Linear Rails Selector Chart BGS TM
Selector hart aydon erk Motion Solutions, nc. www.haydonkerkpittman.com Phone: 800 243 2715 nternational: 203 756 7441 MOTORZ BS TM inear Rails with Recirculating Ball Slide The BS inear Rail combines
More informationRDS. Articulating Probe Holder.
Industrial Measuring Technology from Carl Zeiss RDS. Articulating Probe Holder. SIMPLY MEASURE Range of applications You won't find a simpler or more versatile technology. The Zeiss RDS makes it possible,
More informationFluid Mechanics. Standard Traverse Systems for LDV, PDPA and PIV
Fluid Mechanics Standard Traverse Systems for LDV, PDPA and PIV Specifications T1D T2D T3D T3DL T3DH T1DE T2DE T3DE T3DLE T3DHE Max Vertical Load on Z-Axis 72 72 72 72 72 (kg) Max Static Moment M z1 (kgm)
More informationDigital Indicator Solutions
Digital Indicator Solutions Loop-Powered Attachable Compact Attachable Loop-Powered Smart Compact System Loop-Powered Compact Smart System Intelligent Smart System "Intelligent" Options Dual & Display
More informationWe bring quality to light. LGS 350 Goniophotometer
We bring quality to light. LGS 350 Goniophotometer light measurement The features at a glance Type C goniophotometer with horizontal optical axis For samples up to max. 700 mm diameter and 8 kg weight
More informationRS-FX-N01 wind transmitter user's Guide (485type)
RS-FX-N01 wind transmitter user's Guide (485type) Issue:. V1. 0 1 2 Context 1. Introduction...4 2. Installation instructions... 5 3. Configure the software installation and use...7 4. Communication Protocol...
More informationMPS50SL Miniature Mechanical-Bearing Screw-Driven Linear Stage
MPSSL Miniature Mechanical-Bearing Screw-Driven Linear Stage Compact mm width, with travel to mm Precision ground ball-screw or lead-screw drive DC servo or stepper motor Crossed-roller bearings High resolution
More informationMLC 420. MAGNETIC Press Brake ENCODERS OPERATION MANUAL
MLC 420 MAGNETIC Press Brake ENCODERS NON-CONTACT INTEGRATED BEARING SYSTEM USER SELECTABLE REFERENCE POSITION LEFT OR RIGHT MOUNTING HIGH RESOLUTION FROM 0.005mm HIGH PROTECTİON AGAİNST VIBRATION IP67
More informationElectronics Assembly and Test Plan Rev 3
Overview This test plan will describe the process for testing and assembling the electronics system. It will discuss the required equipment, applicable engineering requirements, desired outcomes of each
More informationMotorized Solutions. Hall-Effect solid-state sensor technology integrated into motorized zoom lenses.
Motorized Solutions Hall-Effect solid-state sensor technology integrated into motorized zoom lenses. Hall-Effect sensors are unaffected by ambient light, environmental contamination, and variations in
More information242 Winch 1 User Manual
242 Winch 1 User Manual WWW.WAHLBERG.DK TELEPHONE +45 86 18 14 20 EMAIL: sales@wahlberg.dk Index: TECHNICAL SPECIFICATIONS: 3 GENERAL: 4 PRODUCT CONTENT: 4 DESCRIPTION: 4 AREA OF USE:... 5 OVERVIEW: 5
More informationFOX-50 Heat Flow Meter
FOX-50 Heat Flow Meter Site Preparation Guide Revision A Issued June 2016 Page 1 Table of Contents Table of Contents... 1 Ideal Setup... 2 System Components... 3 Instrument Measurements... 4 Utility Requirements...
More informationGRYF. Measuring Instruments. measuring electrochemical and physical values. monitoring the environment. controlling technological processes
measuring electrochemical and physical values monitoring the environment controlling technological processes www.gryf.cz HB, spol. s r. o.,cechova 314, 580 01 Havlickuv Brod, CZ, Tel.: +420 569 425 024
More informationX/Y Issues on ASP-645-1
X/Y Issues on ASP-645-1 Issues seen with X or Y problems: A) Table will not move in X or Y when you are using the Frame Arrow buttons on the control panel. B) On power up the control panel gives Error
More informationIntroduction to the FTA4000
Introduction to the FTA4000 This document will help you get started with your new FTA4000. The FTA4000 is optimized for contact angle measurements using very small droplets on small samples. It uses a
More informationLaserlyte Alignment System
Laserlyte Alignment System A Global Laser Brand The LaserLyte alignment system is a unique, user adjustable, plug and play system suitable for a wide range of applications, i.e. alignment and these applications
More informationSMALLER SBD15-60 SIZE NEW. HepcoMotion NOW AVAILABLE. SBD Sealed Belt Drive
NEW SMALLER SD15-60 SIZE NOW AVAILALE HepcoMotion SD Sealed elt Drive Introduction The HepcoMotion SD is an exceptionally rugged, quiet and precise linear unit. It uses super-smooth Hepco LG caged linear
More informationPhoto Emission Tech., Inc. 760 Calle Plano, Camarillo, CA USA Tel: (805) Fax: (805)
IQE1800 SYSTEM INTRODUCTION Quantum Efficiency (QE) measurements provide a primary characterization method for completed photovoltaic devices. QE system provides electronics and software designed for fully
More informationParts Manual. SpeedLimiter D000030R01 YOUR EFFICIENCY IS OUR CHALLENGE. ESL2 ( electronic ) SL4 ( mechanical ) Speed Limiter - SL4
Parts Manual ESL2 ( electronic ) Speed Limiter - SL4 10-32 Vdc 00 0002 02 1212 - F1185.03 SL4 ( mechanical ) SpeedLimiter D000030R01 YOUR EFFICIENCY IS OUR CHALLENGE All rights reserved. No part of this
More informationSMART SOFTWARE FOR IMAGING SOLUTIONS. Complex Tasks Made Easy With DynamicStudio
SMART SOFTWARE FOR IMAGING SOLUTIONS Complex Tasks Made Easy With DynamicStudio A magnetic mixing experiment in micro scale, displaying the fingering pattern of the Labyrinthine instability between the
More informationMachineryMate 200 operating guide Handheld vibration meter
MachineryMate 200 operating guide Handheld vibration meter Wilcoxon Sensing Technologies 20511 Seneca Meadows Parkway, Germantown MD 20876, USA Amphenol (Maryland), Inc d/b/a Wilcoxon Sensing Technologies
More informationPAN-TILT MOTOR for MOBOTIX cameras M1, M10, M12. User s Manual V03_EN
PAN-TILT MOTOR for MOBOTIX cameras M1, M10, M12 V03_EN 2007 Table of Contents 1. INTRODUCTION... 2 2. PACKAGE CONTENT... 3 3. SPECIFICATIONS... 4 4. INSTALLATION... 5 4.1 Establishing the best location...
More informationPROBES FOR YSI MULTILAB METERS
PROBES FOR YSI MULTILAB METERS These IDS sensors automatically store their unique serial number and calibration data. They maintain their calibration data even if moved to another meter. The meter monitors
More informationMDVR 800 QUICK START GUIDE
MDVR 800 QUICK START GUIDE Introduction & Warnings Before installing please read the following warnings carefully. Stortech CCTV strongly recommends that all connections and installations are carried out
More informationUser's Guide. Datalogging Light Meter with PC Interface. Model
User's Guide Datalogging Light Meter with PC Interface Model 401036 Warranty EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for one year from date
More informationTemperature Switches
ETS 00 Series Temperature Switch for Inline and Tank Mounting Applications Description The ETS 00 is a compact electronic temperature switch with 4-digit digital display. Pressure resistant to 8700 psi,
More informationManual. Model#-DB25M-3R6A. 6 Axis CNC Interface Breakout Board. Lastest update : Feb Store this manual away for further reference.
Manual 6 Axis CNC Interface Breakout Board Model#-DB25M-3R6A Lastest update : Feb 2016 Read this manual carefully before making connections to the board. Store this manual away for further reference. Safety
More informationEI- Shaft Alignment System
EI- Shaft Alignment System EI-ALIGNMENT EI-SHAFT ACE TM EI-Shaft Ace TM the world s fastest & easiest to use laser shaft alignment system. EI-Shaft Ace TM is the simplest & easiest to use laser shaft alignment
More informationAWG2300. USB Multifunction Arbitrary Waveform Generator SCICORE INSTRUMENTS, INC.
AWG2300 USB Multifunction Arbitrary Waveform Generator Simultaneous dual channel waveform generation DC - 50 MHz output frequency range Waveform sampling rate: 300MS/s Waveform vertical resolution: 14-bit
More informationDew point. Dew point set DS 400. Special features: Dew point set DS 400. Technical data DS 400. Technical data FA 410
Dew point set DS 400 for stationary dew point monitoring of refrigeration or adsorption dryers. The touch screen graphic display enables an intuitive operation and shows the progress of the measured values.
More informationThis manual was downloaded on (0) TS8000. Firewire Option 8000/FA/00 HA Issue 1
TS8000 Firewire Option 8000/FA/00 HA471483 Issue 1 Copyright SSD Drives, Inc. 2006 All rights strictly reserved. No part of this document may be stored in a retrieval system, or transmitted in any form
More informationPARTS-, SPARE & MATERIAL LIST Component: type & version LPU-D-POWER-ON/OFF 230 VAC 50/60 Hz v2a Material no.: 160G4182 Alt.: 1
Page 1 of 6 Notes: All items with stated material number can be purchased as spare parts. When ordering spare parts: please state material number. Document numbers refered to: 160G9358 Posnr Material Description/
More informationM-545 Manual XY Microscope Stage For Olympus, Nikon, Leica & Zeiss Microscopes / PI Piezo Stages
M-545 Manual XY Microscope Stage For Olympus, Nikon, Leica & Zeiss Microscopes / PI Piezo Stages M-545 manual microscopy stages are designed to accommodate the P-545 PInano series of XY / XYZ Piezo stag
More informationAccumeasure TM Capacitance Probes
MTI Instruments Flat Capacitance Probes Accumeasure TM Capacitance Probes for Accumeasure TM D series MTI Instruments Flat Capacitance Probes for Grounded Targets MTI s flat capacitance probe series. The
More informationPOWERLINK Motor Test (Eddy Current Dynamometer)
POWERLINK Motor Test (Eddy Current Dynamometer) info@powerlinkpt.com POWERLINK Motor Performance Test (Eddy Current Dynamometer) POWERLINK Motor Test (Eddy Current Dynamometer) KEY FEATURES High precision
More informationCCN-to-Ethernet Converter Installation Instructions
CCN-to-Ethernet Converter Installation Instructions Installation The CCN-to-Ethernet Converter is a device designed to enable connection of a Carrier Comfort Network (CCN) to a ComfortWORKS 5.0 or greater
More informationMotorized Linear Slides. EZS2 Series
Motorized Linear Slides EZS Series Advancing Positioning Applications Oriental Motor's Motorized Linear Slides The EZS Series motorized linear slide is designed to achieve greater convenience and performance
More information1) HotSync Port: On the bottom of the unit, mates with the cradle. This is the default and does not light the Port LED.
Introduction: The Koala PDA has 5 selectable I/O ports, instead of the usual single Hotsync Port. While these ports can be selected using simple software commands, the Koala Utility is designed to allow
More informationDK-M3-FS and DK-M3-F Focus Module Developer s Kits Tiny, all-in-one smart motion modules for positioning optics in OEM cameras
DK-M3-FS and DK-M3-F Focus Module Developer s Kits Tiny, all-in-one smart motion modules for positioning optics in OEM cameras Tiny all-in-one solution: no external control board needed Superior image
More informationEnergy Management Modular DC Energy analyzer Type VMU-E and VMU-X
Energy Management Modular DC Energy analyzer Type VMU-E and VMU-X Modular solution based on the combination of two units: VMU-E analysis unit and VMU-X universal power supply and RS485 communication unit.
More informationLS Linear Heads. RoHS-Compliant. Rack and Pinion Systems. Features D-114. Linear and Rotary Actuators
inear and Rotary ctuators RoHS-Compliant Rack and Pinion Systems S inear Heads dditional Information Technical reference Page F-1 2S 4S Vertical Stroke: F Type Horizontal Stroke: B Type Vertical Stroke:
More informationFA-2448 SIX POSITION Filter Wheel
15 Discovery Way, Acton, MA 01720 Phone: (978)263-3584, Fax: (978)263-5086 Web Site: www.acton-research.com Operating Instructions Acton Research Corporation FA-2448 SIX POSITION Filter Wheel Rev. 3.05.17
More informationECS servo system MCS servo motors
ECS servo system MCS servo motors for multi-axis applications Lenze Global Drive dynamic, powerful, compact ECS, MCS dynamic, powerful, compact The ECS servo system Servo drives with a high overload capacity
More informationCompact Linear Actuators DRL Series Built-In Controller Type Pulse Input Type
Compact Linear ctuators DRL Series Built-In Controller Type Pulse Input Type This product integrates the stepper motor with a ball screw to achieve linear motion. Performance is improved by reducing the
More informationStandard Options. Model 4100 Position Indicating Meter. Three Phase Motor Control. Positran Transmitter
Standard Options Model 4100 Position Indicating Meter A percent-of-full-travel meter is supplied with a trim potentiometer resistor, terminal block and connectors. A potentiometer is required in the actuator
More informationPARTS-, SPARE & MATERIAL LIST
Page 1 of 5 Notes: All items with stated material number can be purchased as spare parts. When ordering spare parts: please state material number. Document numbers refered to: 160G9358 Posnr Material Description/
More informationWELDING CONSOLE KVS L
WELDING CONSOLE KVS L KVS-L 1x1 KVS-L 2x2 KVS-L 3,5x2 A (mm) AS REQUEST AS REQUEST AS REQUEST B (mm) 1000 2000 3500 C (mm) 1000 2000 2000 DIFFERENT WELDING PROCCESS TIG, MIG,MAG SAW TIG, MIG,MAG SAW TIG,
More informationExpert I/O 1000 Hardware User Manual
Revision 4 January 6, 2010 2008-2010 Dajac Inc. All Rights Reserved. www.dajac.com sales@dajac.com Contents EXPERT I/O 1000...2 PIN CONFIGURATION...2 USB...3 DC IN...4 +B1/+B...4 +5V Output...4 +24V Input...4
More informationLock Driver 8 Technical Manual
Table of contents... 3 Product description... 3 Connections... 4 Connecting Electronic Locks... 5 DIP switch settings... 6 Maintenance... 8 Troubleshooting Guide... 8 Technical data... 8 Appendix... 8
More informationQUAD. Four-Axis Motorized Micromanipulator System. Operation Manual. Rev (( ) One Digital Drive Novato, CA 94949
QUAD Four-Axis Motorized Micromanipulator System Operation Manual Rev. 2.12 ((20141229) One Digital Drive Novato, CA 94949 Voice: 415-883-0128 Web: www.sutter.com Fax: 415-883-0572 Email: info@sutter.com
More informationHarpagon wiring instructions
Harpagon wiring instructions A Cat 5 network cable is used to connect the flow meter collector box to the Harpagon metering system. A 25 ft cable is provided by default. You can order a longer cable when
More informationMotor protection circuit breakers
R Motor protection circuit breakers Motor protection circuit breakers are used for start-up and protection of electric motors (industry, small machines, external use, agricultural machines, compressors,
More informationTemperature logger with internal sensor Instruction manual
LOGGER R0110 Temperature logger with internal sensor Instruction manual Manual for use of temperature logger R0110 Logger is designed for measurement and record of temperature from built-in internal temperature
More informationG S STEM SY R O SENS G-01
SENSOR SYSTEMS -01 Sensor Systems Linear auges Laser Scan Micrometers Contents Linear auges Economical Design Linear auge LF Extra-Slim Linear auge LB ABSOLUTE Waterproof Linear auge LS Low-Cost EC Counter
More informationBasic Polarization Techniques and Devices 1998, 2003 Meadowlark Optics, Inc
Basic Polarization Techniques and Devices 1998, 2003 Meadowlark Optics, Inc This application note briefly describes polarized light, retardation and a few of the tools used to manipulate the polarization
More informationKinematics And Dynamics Lab Manual EXPERIMENT NO:01 STATIC & DYNAMIC BALANCE EXPERIMENT
EXPERIMENT NO:01 STATIC & DYNAMIC BALANCE EXPERIMENT Aim To balance the given masses statically by drawing force polygon and couple polygon and dynamically by trial and error method on a shaft. Theory
More informationour experience...your solution Controlling and Monitoring Gateway
our experience......your solution Controlling and Monitoring Gateway FEATURES Clearly readable dark-blue display (4x20), 8 key keyboard and 8 signaling LEDs provides a comprehensive overview of the system
More informationSeries 1780 dynamometer and thrust stand datasheet
Series 1780 dynamometer and thrust stand datasheet Typical use Inrunner and outrunner brushless motor characterization (0-100A) Propeller characterization (max 40 ) Servo testing and control Battery endurance
More informationMPS75SL. Miniature Mechanical-Bearing Screw-Driven Linear Stage. Compact 75 mm width, with travel to 100 mm. Precision ground ball-screw drive
MPSSL Miniature Mechanical-Bearing Screw-Driven Linear Stage Compact mm width, with travel to 0 mm Precision ground ball-screw drive DC servo or stepper motor nti-creep crossed-roller bearings High resolution
More informationP14542: Vertical XY Camera Rig. Systems Design Review Sep-26-13
P14542: Vertical XY Camera Rig Systems Design Review Sep-26-13 Agenda Team Introduction Problem Statement Key needs/requirements Risk analysis Functional decomposition Morphological analysis Concept generation
More informationMicaSense RedEdge-MX TM Multispectral Camera. Integration Guide
MicaSense RedEdge-MX TM Multispectral Camera Integration Guide Revision: 01 October 2018 MicaSense, Inc. Seattle, WA 2018 MicaSense, Inc. Page 1 of 19 TABLE OF CONTENTS Introduction and Scope 3 Camera
More informationPACSystems* RX3i IC695ACC650
September 2012 PACSystems* RX3i IC695ACC650 Series 90-70 to RX3i Conversion Rack The conversion rack provides a solution for converting an existing Series 90-70 system to PACSystems RX3i, minimizing outage
More informationSMART Coin System QUICK START AND CONFIGURATION GUIDE
SMART Coin System QUICK START AND CONFIGURATION GUIDE SMART Coin System Quick Start and Configuration Guide 2 SMART Coin System Quick Start and Configuration Guide 1 INTRODUCTION 4 2 ASSEMBLY 5 2.1 Detaching
More informationNokeval. FD100 series. User Manual
Nokeval FD100 series User Manual Contents Document information... 2 FD100A4 and FD100A6 field displays... 3 Power supply connection... 4 Configuring... 5 Specifications... 7 Document information Device
More informationTechnical Information Promonitor NRF560
TI00462G/08/EN/03.14 71264171 Products Solutions Services Technical Information For tank side monitor and control of Proservo NMS5 intelligent tank gauge Application is a monitoring unit for use with Proservo
More informationMulti-Range Programmable DC Power Supplies 9115 Series
Data Sheet 1200 W Multi-Range DC Power Supplies Features & Benefits Any 9115 series model can replace several supplies on your bench or in your rack. Unlike conventional supplies with fixed output ratings,
More informationFT Flexitest Family. Switches, Covers and Test Plugs
FT Flexitest Family Switches, Covers and Test Plugs FT Flexitest Switches Description The flexibility provided by the FT case design evolved into a separate family of molded base test switches for testing
More informationHeavy Duty Vibration Meter
USER MANUAL Heavy Duty Vibration Meter Model 407860 Additional User Manual Translations available at www.extech.com Introduction Congratulations on your purchase of the Extech 407860 Vibration Meter. The
More informationHardness measurement of rubber and elastomers IRHD ISO 48 VLRH DIN ISO 27588
LNP nano touch The groundbreaking solution for material testing and geometry acquisition Hardness measurement of rubber and elastomers IRHD ISO 48 VLRH DIN ISO 27588 Deterioration Adhesion Immediate Precise
More informationCOMPACT PRECISION LINEAR MOTORIZED ACTUATORS LSMA Series LSMA-173
COMPACT PRECISION LINEAR MOTORIZED ACTUATORS LSMA Series Narrow Width ized Translation Stages Compact (30 mm) design Precision bearing system Resolution 0.1 microns Standard stroke 20 and 50 mm Optional
More informationPushbuttons and Indicating Lights. Protection Type IP66 NEMA 4X, 13
.5 Pushbuttons and Indicating Lights Product Description Eaton s M22 double pushbutton line is perfect for applications such as motor and pump starting, as well as anytime space is limited. In addition
More informationPSU User s manual Rev. 0 January
PSU User s manual Rev. 0 January 2011 1 This user manual is for the standard version of the converter. All information in this user manual, including methods, techniques and concepts described herein,
More informationEnergy Management Modular DC Energy analyzer Type VIM-E and VIM-X
Energy Management Modular DC Energy analyzer Type VIM-E and VIM-X Modular solution based on the combination of two units: VIM-E analysis unit and VIM-X universal power supply and RS485 communication unit.
More information29 $ Manual Motor Starters FREESHIPPING. MOTOR CONTROLS 25. Features: MMS-32H Frame. MMS-63H Frame.
www.factorymation.com/motorcontrols MOTOR CONTROLS 25 Manual Motor Starters High interrupt capacity Din rail and surface mounting Lockable handle (OFF position) IP20 finger safe terminals Class 10 thermal
More information3 Pole Contactors with AC operating coils
1 3 Pole Contactors with AC operating coils Characteristics General Characteristics Switching Current 9A ~ Rated insulation voltage (Ui) (Conforming to IEC 158-1) V 750 IEC 60947-4 V 1000 Conforming to
More informationCounters, Process Displays, Timers, Tachometers. Product overview
Counters, Process Displays, Timers, Tachometers Product overview Totalizers mechanical Stroke counters Three designs, optional with 5-, 6- or 7-digit display. Manual reset Surface mount with mounting plate
More informationPHYS 1112L - Introductory Physics Laboratory II
PHYS 1112L - Introductory Physics Laboratory II Laboratory Advanced Sheet Diffraction 1. Objectives. The objectives of this laboratory are a. To be able use a diffraction grating to measure the wavelength
More informationYOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND
- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether
More informationHinged safety switches, Palladio line
Hinged safety switches, Palladio line Selection diagram CONTACT BLOCKS 0C 0F 0M C F M snap action snap action snap action C F M CABLE AND CONNECTORS S A P KSM KAM Cable output Cable output M connector
More informationPowerCore Model TEC-10 Installation Manual
PowerCore Model TEC-10 Installation Manual Products covered in this document comply with European Council electromagnetic compatibility directive 2014/30/EU and electrical safety directive 2014/35/EU.
More informationDual channel temperature logger with two binary inputs and LCD display Instruction Manual
LOGGER S0841 Dual channel temperature logger with two binary inputs and LCD display Instruction Manual Instruction Manual for use of S0841 logger Instrument is designed for measurement and record of temperature
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationGOLDAIR TVR /V3.0. Tel: Fax:
2000 series Phase Failure Relay (Over/under voltage,phase loss,phase reversal protector) 1. Applicable range 2000 series phase failure relay is mainly used as a protector against the voltage unbalance,
More informationDiagonal FOV 18.5mm - 2.7mm ( inch); Video Magnification 30x-210x on 22" Monitor.
HD803-BSM22 HD803 3D HD High Definition 1080p Rotational Microscope with Detent Working Distance. Diagonal FOV 18.5mm - 2.7mm (0.72-0.10 inch); Video Magnification 30x-210x on 22" Monitor. HD 1080P 60
More informationMini Feed-Through 15mm
Mini Feed-Through 15mm For wire-to-wire connecting in control, automation, instrumentation and power distribution applications. Altech miniature terminal blocks offer tremendous space advantage as demanded
More information