THE CONTACT MEASURING 3D MEASURING MACHINE ZEISS PRISMO 7 vs. MOBIL MEASURING ARM FARO
|
|
- Alisha McKenzie
- 5 years ago
- Views:
Transcription
1 THE INTERNATIONAL CONFERENCE OF THE CARPATHIAN EURO-REGION SPECIALISTS IN INDUSTRIAL SYSTEMS THE CONTACT MEASURING 3D MEASURING MACHINE ZEISS PRISMO 7 vs. MOBIL MEASURING ARM FARO Ing.Radovan HRIVNÁK,Ing.Ján BEČKA The Department of Machining and Automation, Department of Design and Mechanical Elements, Faculty of Mechanical Engineering, University of Žilina, Univerzitná 1, Žilina, Slovakia Abstract: My contribution includes the contact measuring the part using to the mobil measuring arm FARO and the 3D measuring machine ZEISS Prismo 7. After I was comparing the measurig process for these 2 machines (values of dimensions). Keyworks: measuring machine, part, dimension, mobil measuring arm FARO. INTRODUCTION The 3D measuring of parts is at current era more exactly measuring s way. At current era is this modern method using in bigger extent on practice (car s industry, plane s industry, procesing,...). THE EXPERIMENTS On my contribution made two experiments. The first experiment was made using the mobil measuring arm FARO (contact measuring), fig. 3 and second experiment was made using the 3D measuring machine ZEISS Prismo 7, fig. 4. By these experiments was measuring the part, fig. 1. I choosed these dimensions, fig. 2.
2 Fig.1 The scaned object THE EXPERIMENT 1 This experiment was realizing using to the mobil measuring arm FARO in in the Department of Design and Mechanical Elements, the Mechanical Engineering, University of Žilina [7]. By using of FARO were measuring the dimensions fig. 2. A - A Fig.2 The measured dimensions
3 table 1. Specified values of dimensions a 86 h 40 b 40 i 23 c 40 j 26,5 d 57 k 97,5±0,2 e 67,5 l 124±0,2 f 39 m 15 H13 g 62 n 30 The mobile measuring arm FARO with laser head, fig. 3 is contact and contactless scanning equipment. This equipment has laser head contactless laser s scanning. The clouds poinds (given 3 coordinates x, y, z) of this scanner are transformation on the special software PolyWorks we have the virtual 3D object [2], [4]. Fig.3 Mobil measuring arm FARO with laser head [4] The specification of this equipment: - effective scanning breadth (64 mm), - measuring frequency (30 pictures/s), - weight (530 g), - dimensions (105 x 44 x 124 mm), - scanning distance (89 mm až 184 mm), - accurancy (0,03 mm contact scanning), - accurancy (0,05 mm contactless scanning), - suitable for scanning complex parts.
4 table 2. Measured values of dimensions by using FARO a 85,969 h 40,135 b 39,724 i 23,034 c 40,133 j 26,701 d 57,024 k 97,388 e 67,144 l 124,191 f 38,972 m 14,952 g 62,006 n 30,245 THE EXPERIMENT 2 The second experiment was realize using the 3D measuring machine ZEISS Prismo 7 [13], fig. 4. The measuring machine ZEISS Prismo 7 is especialy contact measuring machine. The measuring datas with this machine are evaluate by software Umess 1. The datas of the ZEISS Prismo 7 (the portal machine)[10]: - Measuring range [mm] (X x Y x Z): 700 x x 650, - Measuring error - (2,7+L/300)µm. By means of the ZEISS Prismo 7, fig. 4 were measuring the dimensions, fig. 2. Fig.4 Stacionary measuring machine ZEISS Primo 7 [12]
5 The PRISMO series of coordinate measuring machines set the standard in industrial measuring technology worldwide. With its scanning probe and the legendary VAST expert system, PRISMO is the market leader in its class. It has become the standard for scanning CMMs. Its success is evident by the constant performance enhancements and development of the product line to include new fields of application and sensor systems [12]. table 3. Measured values of dimensions by using ZEISS Prismo 7 a 85,920 h 39,960 b 39,690 i 23,080 c 39,990 j 26,680 d 56,950 k 97,320 e 67,100 l 123,960 f 38,950 m 14,950 g 69,920 n 29,980 CONCLUSION On the tab. 2 and tab. 3 are presentation measured values of dimensions (a, b, c,...), which are presentation on the tab. 1. More important dimensions (k, l, m) are made on prescribe tolerations. The mobil measuring arm measured with this accurancy 0,05 mm and 3D measuring machine with this accurancy 0,003 mm. REFERENCES [1] Macuš P., Technológie Reverse Engineeringu, Rigorózna práca, Žilina, [2] Morovič L., Reverse Engineering, Projekt dizertačnej práce, Trnava, [3] [4] [5] Hrivnák R., Proces Reverse Engineering, skenovanie objektov a spracovanie naskenovaných dát, Zborník Automation in production Planning and Manufacturing, May 2006, Žilina Valča Slovakia. [6] [7] [8] [9] [10] ght_ _i-e.pdf [11] 4e [12] [13]
INSPECTION OF FREE FORM SURFACES
7 th INTERNATIONAL MULTIDISCIPLINARY CONFERENCE Baia Mare, Romania, May 17-18, 2007 ISSN-1224-3264 INSPECTION OF FREE FORM SURFACES Prof. Ing. Dr. Jozef Peterka Ing. Ladislav Morovič - Ing. Peter Pokorný,
More informationEMRP JRP IND62 TIM: Use of on-board metrology systems for area-scanning on machine tools
EMRP JRP IND62 TIM: Use of on-board metrology systems for area-scanning on machine tools Author: Co-authors: doc. Ing. Vít Zelený, CSc. doc. Ing. Ivana Linkeová, Ph.D. Ing. Jakub Sýkora Pavel Skalník Jaromír
More informationAN EVALUATION OF NON-CONTACT LASER SCANNER PERFORMANCE USING CALIBRATED ARTIFACTS
AN EVALUATION OF NON-CONTACT LASER SCANNER PERFORMANCE USING CALIBRATED ARTIFACTS Michael Gomez, Colleen Vaccaro, Chase Maness, Connor Lawrence, Carson Murray, Luis Vargas, Greg Caskey, Chris Evans, and
More informationLaser scanning and CAD conversion accuracy correction of a highly curved engineering component using a precision tactile measuring system
Laser scanning and CAD conversion accuracy correction of a highly curved engineering component using a precision tactile measuring system Athanasios Giannelis 1, Ioanna Symeonidou 2, Dimitrios Tzetzis
More informationApplication of reverse engineering techniques in mechanics system services
Available online at www.sciencedirect.com Procedia Engineering 48 (2012 ) 96 104 MMaMS 2012 Application of reverse engineering techniques in mechanics system services Michal Dúbravík a *, Štefan Kender
More informationCREATING OF 3D MODEL WITH DIFFICULT SHAPES WITHOUT THE PARAMETERS AND DIMENSIONS OF REAL PART
THE INTERNATIONAL CONFERENCE OF THE CARPATHIAN EURO-REGION SPECIALISTS IN INDUSTRIAL SYSTEMS 7 th EDITION CREATING OF 3D MODEL WITH DIFFICULT SHAPES WITHOUT THE PARAMETERS AND DIMENSIONS OF REAL PART Katarína
More informationQUALITY CONTROL OF PARTS AND ASSEMBLIES USING SOFTWARE GOM INSPECT BASED ON PORTABLE CMM DATA
8 th International Quality Conference May 23 rd 2014 Center for Quality, Faculty of Engineering, University of Kragujevac Milan Blagojevic 1) Miroslav Zivkovic 1) 1) Faculty of Engineering, University
More informationThe FaroArm. The world s best-selling measurement arm
The FaroArm The world s best-selling measurement arm The FaroArm One step closer to perfection Versatile Three models: Quantum, Platinum and Fusion. FARO offers diverse mounting options and accessories
More informationCompany overview. PolyWorks 3D metrology software helps oil field equipment manufacturer cut motor component inspection time in half
Company overview PolyWorks 3D metrology software helps oil field equipment manufacturer cut motor component inspection time in half Weatherford International Ltd. (NYSE: WFT) is one of the world s largest
More informationREPLICATING A CMM-BASED INSPECTION PROCESS. InnovMetric Software replicates a CMM-based inspection process using a 3D digitizer and PolyWorks
PRATT & WHITNEY REPLICATING A CMM-BASED INSPECTION PROCESS InnovMetric Software replicates a CMM-based inspection process using a 3D digitizer and PolyWorks Today, manufacturers in the automotive and aerospace
More informationAICON MoveInspect XR8
AICON MoveInspect XR8 PORTABLE. ROBUST. ACCURATE. PRODUCT BROCHURE THE NEW BENCHMARK FOR INSPECTION, TRACKING AND POSITIONING Today, every company has to meet the challenge to develop products within shorter
More informationReverse Engineering: Mechanical. Dr. Tarek A. Tutunji
Reverse Engineering: Mechanical Dr. Tarek A. Tutunji Mechanical RE References: 1. RE (reverse engineering) as necessary phase by rapid product development by Sokovic and Kopac 2. A Practical Appreciation
More information3D Scanners help Grovely Wood
The BENNINGHOVEN company was founded by Otto Benninghoven in 1909, in Hilden, Germany and was set up to produce gear wheels and machine tools. The company diversified into the field of industrial combustion
More information3D Scanning. Qixing Huang Feb. 9 th Slide Credit: Yasutaka Furukawa
3D Scanning Qixing Huang Feb. 9 th 2017 Slide Credit: Yasutaka Furukawa Geometry Reconstruction Pipeline This Lecture Depth Sensing ICP for Pair-wise Alignment Next Lecture Global Alignment Pairwise Multiple
More informationProposed new tests for evaluating CMM performance
Introduction Proposed new tests for evaluating CMM performance Pereira, P. H. & Beutel, D. E. Technical Services Division, Caterpillar Inc., Peoria, IL The current series of international standards for
More informationCOMPONENT BASE MODELS FOR WORKPLACE
COMPONENT BASE MODELS FOR WORKPLACE Ľuboslava Šidlovská Dominika Palaščáková Abstract: A research center that is used to verify the identification of selected algorithms and methods for secure grip of
More informationComparision of contact and contactless measuring methods for form evaluation
Available online at www.sciencedirect.com Procedia Engineering 48 (2012 ) 273 279 MMaMS 2012 Comparision of contact and contactless measuring methods for form evaluation Peter Ka uch a, Miroslav Dovica
More information3D Scanners help Grovely Wood speed up their production time
Coventry St Michaels Cathedral, built in the late 14th century. It was one of the most beautiful and largest parish churches of its time, in England until it was destroyed during the Second World War.
More informationAutomatically search for holes and locate hole centers to offset measurement
New Tools in PolyWorks 2018 InnovMetric Software Inc. All rights reserved. PolyWorks is a registered trademark of InnovMetric Software Inc. InnovMetric, PolyWorks Inspector, PolyWorks Modeler, PolyWorks
More information3D scanning in automotive and aerospace OVERVIEW - TRENDS
PROCESS INNOVATION THROUGH MEASUREMENT INTEGRATION 3D scanning in automotive and aerospace OVERVIEW - TRENDS 2017-08-29 Geert Creemers, CEO ARGON Measuring Solutions CONTENTS ARGON IN A NUTSHELL Technologies
More informationMULTIPLE-SENSOR INTEGRATION FOR EFFICIENT REVERSE ENGINEERING OF GEOMETRY
Proceedings of the 11 th International Conference on Manufacturing Research (ICMR2013) MULTIPLE-SENSOR INTEGRATION FOR EFFICIENT REVERSE ENGINEERING OF GEOMETRY Feng Li, Andrew Longstaff, Simon Fletcher,
More informationCHAPTER. SAToolkit. Clouds. Mesh Vertices
CHAPTER What s New In SA 2 One of the advantages of SpatialAnalyzer is that development occurs at a brisk pace. New feature requests, bug fixes, and changes are implemented quickly, giving you the opportunity
More informationThe measuring software of the 4 th generation
The measuring software of the 4 th generation METROSOFT QUARTIS YOU DECIDE THE PROGRAM Significant measurement results - fast and easy! With Metrosoft QUARTIS, WENZEL Metromec introduces a new software
More informationTHE OPTICAL PORTABLE CMM FOR INDUSTRIAL APPLICATIONS
METROLOGY SOLUTIONS THE OPTICAL PORTABLE CMM FOR INDUSTRIAL APPLICATIONS PORTABLE 3D MEASUREMENT SOLUTIONS The HandyPROBE arm-free portable probing system and the C-Track dual-camera sensor form a unique
More informationFARO Laser Scanner Focus 3D X330 Demonstration Day
FARO Laser Scanner Focus 3D X330 Demonstration Day Thursday 7 th November 2013 Precision Measurement Technology New Version SCENE 5.2 - Overview Support for Focus 3D X 330 SCENE WebShare Cloud Integration
More informationMETROLOGY SOLUTIONS THE OPTICAL PORTABLE CMM FOR INDUSTRIAL APPLICATIONS
METROLOGY SOLUTIONS THE OPTICAL PORTABLE CMM FOR INDUSTRIAL APPLICATIONS Because it is truly portable and insensitive to changes in the environment measuring parts that can t be moved to a granite or cast
More informationUser s Group Meeting. Focus: Basic FARO Arm Using. Event Dates and Locations Meeting Details. Attendee Information
User s Group Meeting Focus: Basic FARO Arm Using Event Dates and Locations Meeting Details User Group Meeting 1: Wednesday, February 4th Location: Hampton Inn Meadville 11446 North Dawn Drive Meadville,
More information3D INSPECTION SOFTWARE
3D INSPECTION SOFTWARE PRODUCT WORKFLOWS GEOMAGIC QUALIFY WORKFLOW SCAN AND PROBE Collect 3D point cloud and probe data from physical parts to be used for measurement and comparison to reference data.
More informationMaximizing the benefits of 3D measurement technologies for industrial manufacturing organizations. 3D measurement devices
In today s competitive market, the time needed to bring a new product to market is a critical factor to commercial success. To face this challenge, leading-edge manufacturing organizations have integrated
More informationTHE ANALYSIS OF PRESSED PARTS DEFORMATION ON SMALL RADII. František TATÍČEK, Martin KUBELKA, Tomáš PILVOUSEK, Tomáš PAČÁK, David CVEŠPER
THE ANALYSIS OF PRESSED PARTS DEFORMATION ON SMALL RADII František TATÍČEK, Martin KUBELKA, Tomáš PILVOUSEK, Tomáš PAČÁK, David CVEŠPER Czech Technical University at Prague, Faculty of Mechanical engineering,
More information3D SPATIAL DATA ACQUISITION AND MODELING OF ANGHEL SALIGNY MONUMENT USING TERRESTRIAL LASER SCANNING
JOURNAL OF APPLIED ENGINEERING SCIENCES VOL. 2(15), issue 2_2012 ISSN 2247-3769 ISSN-L 2247-3769 (Print) / e-issn:2284-7197 3D SPATIAL DATA ACQUISITION AND MODELING OF ANGHEL SALIGNY MONUMENT USING TERRESTRIAL
More informationCirrusSense Router Quick Start Guide. Connect your router. Configure your router for internet access
CirrusSense Router Quick Start Guide by Transducers Direct Connect your router 1) First, if you re going to connect to the internet via a wired connection, connect an Ethernet cable to the Ethernet port
More informationFARO Scanning Plugin
FARO Scanning Plugin for Geomagic Studio 6 service release 4, Geomagic Qualify 6 service release 2, and Geomagic Qualify 7 Document version B Copyright 2004, Raindrop Geomagic, Inc. The FARO scanner is
More informationQC20-W COM port profile for Windows 8
QC20-W COM port profile for Windows 8 Overview The purpose of this application note is to configure Ballbar 20 software to connect to QC20-W via a Bluetooth device set up as a COM port. This process should
More informationHP-L-8.9 LASER SCANNER
PRODUCT BROCHURE HP-L-8.9 LASER SCANNER Cost-effective laser scanning for the ROMER Absolute Arm 2 HP-L-8.9 LASER SCANNER HIGHLIGHTS MAKING LASER SCANNING ACCESSIBLE TO ALL The HP-L-8.9 is an affordable
More informationLeica Absolute Trackers
PRODUCT BROCHURE Leica Absolute Trackers Probing Solutions Leica Absolute Tracker AT402 and B-Probe ENTRY-LEVEL ULTRA-PORTABLE Probing System The Leica B-Probe is a handheld and battery-powered point probing
More informationRAPID MOULD MANUFACTURING FOR SCULPTURED SHAPED PART BY REVERSE ENGINEERING AND CAD/CAM
Proceedings in Manufacturing Systems, Volume. 6, Issue 3, 2011 ISSN 2067-9238 RAPID MOULD MANUFACTURING FOR SCULPTURED SHAPED PART BY REVERSE ENGINEERING AND CAD/CAM Tadi SURESH BABU 1,*, Palankannayil
More informationIntegration of Emerging Inspection Devices with Rapid Manufacturing Systems
1 Integration of Emerging Inspection Devices with Rapid Manufacturing Systems Anath Fischer CAD & Life Cycle Engineering Faculty of Mechanical Engineering Technion - Israel Institute of Technology, Haifa,
More informationDIMENSIONAL INSPECTION IN QUALITY CONTROL
THE COMPLETE SOLUTION FOR DIMENSIONAL INSPECTION IN QUALITY CONTROL APPLICATIONS METROLOGY SOLUTIONS ARE QUALITY CONTROL ISSUES IMPACTING YOUR BOTTOM LINE? Creaform s comprehensive range of portable and
More informationMetrology Automotive Seating
Metrology Automotive Seating FARO Edge ScanArm Complete Seat Measurement Published by: FARO Europe GmbH & Co. KG, Lingwiesenstrasse 11/2, D-70825 Korntal-Münchingen, Tel: +49 7150 9797-0, Fax: +49 7150
More informationPRODUCT BROCHURE SCANNING SOLUTIONS PORTABLE LASER SCANNING WITH THE LEICA ABSOLUTE TRACKER
PRODUCT BROCHURE SCANNING SOLUTIONS PORTABLE LASER SCANNING WITH THE LEICA ABSOLUTE TRACKER INTRODUCTION THE RIGHT SOLUTION FOR EVERY SCANNING APPLICATION Hexagon Manufacturing Intelligence s portable
More informationMeasurement procedure for application of white light scanner in the automotive sector
Available online at www.sciencedirect.com ScienceDirect Procedia Manufacturing00 (2017) 000 000 www.elsevier.com/locate/procedia Manufacturing Engineering Society International Conference 2017, MESIC 2017,
More informationPerceptron Scan Plugin 7.0
Perceptron Scan Plugin 7.0 For compatibility with Geomagic products, see Release Notes for Geomagic Perceptron Plugin 7.0. Copyright 2004, Raindrop Geomagic, Inc. Plugins > Perceptron is the interface
More informationTERRESTRIAL LASER SYSTEM TESTING USING REFERENCE BODIES
TERRESTRIAL LASER SYSTEM TESTING USING REFERENCE BODIES Miriam Zámečníková and Alojz Kopáčik Department of Surveying, Faculty of Civil Engineering Slovak University of Technology Email: miriam.zamecnikova@stuba.sk
More informationIndustrial Measuring Technology from Carl Zeiss CONTURA CONTURA G2 RDS G2 AKTIV
Industrial Measuring Technology from Carl Zeiss CONTURA CONTURA G2 RDS G2 AKTIV Overview Introducing the next generation scanning platform. CONTURA G2 RDS and CONTURA G2 AKTIV: The CMM that brought Active
More informationBuilding Information Modeling (BIM) and Measuring Techniques
Building Information Modeling (BIM) and Measuring Techniques Christian CLEMEN, Robert EHRICH and Christopher VAN ZYL, Germany C. Clemen, R. Ehrich,C. van Zyl Building Information Model (BIM) and Measuring
More informationNew Approach in Non- Contact 3D Free Form Scanning
New Approach in Non- Contact 3D Free Form Scanning Contents Abstract Industry Trends The solution A smart laser scanning system Implementation of the laser scanning probe in parts inspection Conclusion
More informationAssembly and Automation Company. WORLDWIDE.
www.lumaco.eu Assembly and Automation Company. WORLDWIDE. Assembly technology provider Electric installation integrator Programming and automation Innovation and machine design Electric installation Installation
More informationGeometric Accuracy Investigations of the Latest Terrestrial Laser Scanning Systems
Thomas Kersten, Klaus Mechelke, Maren Lindstaedt, Harald Sternberg Geometric Accuracy Investigations of the Latest Terrestrial Laser Scanning Systems Outline of presentation Introduction Laser scanning
More informationRegistration with Spheres and Checker Board Targets
Registration with Spheres and Checker Board Targets Work Shop Óscar García Uriarte Sales Engineer 1 Index When and Why Targets? Which kind of targets? How to place them. Targets in Scene. Accuracy using
More informationMODERN DIMENSIONAL MEASURING TECHNIQUES BASED ON OPTICAL PRINCIPLES
MODERN DIMENSIONAL MEASURING TECHNIQUES BASED ON OPTICAL PRINCIPLES J. Reichweger 1, J. Enzendorfer 1 and E. Müller 2 1 Steyr Daimler Puch Engineering Center Steyr GmbH Schönauerstrasse 5, A-4400 Steyr,
More informationRelease Notes. Release Date: March, 2018
Release Notes Release Date: March, 2018 Software: Geomagic Design X Version 2016.2.1 TABLE OF CONTENTS 1 INTRODUCTION 1 COPYRIGHT 1 2 INSTALLATION 2 SYSTEM REQUIREMENTS 2 DOWNLOAD AND INSTALL SOFTWARE
More informationCh 22 Inspection Technologies
Ch 22 Inspection Technologies Sections: 1. Inspection Metrology 2. Contact vs. Noncontact Inspection Techniques 3. Conventional Measuring and Gaging Techniques 4. Coordinate Measuring Machines 5. Surface
More informationReverse Engineering Tool to improve quality and efficiency of design, manufacture and analysis.
Reverse Engineering Tool to improve quality and efficiency of design, manufacture and analysis. INTRODUCTION The Internet and technology in general has forever changed the world. This dawning of the technical
More informationRESEARCH PAPERS FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN TRNAVA, 1 SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA,
RESEARCH PAPERS FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN TRNAVA SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA 10.1515/rput-2016-0038 2016, Volume 24, Number 38 VISUALISATION IN ASSEMBLY Štefan VÁCLAV
More informationStrategy. Using Strategy 1
Strategy Using Strategy 1 Scan Path / Strategy It is important to visualize the scan path you want for a feature before you begin taking points on your part. You want to try to place your points in a way
More informationX=2000 Z=2000 X=2000 Z=1600. E0/E150 in µm L/ L/ L/ L/ L/ L/400. R0 in µm
ZEISS MMZ M Specifications Version: November 2017 System description Type according to ISO 10360-1:2000 Moving bridge CMM Operating mode motorized / CNC Sensor mounts Fixed installation of ZEISS VAST gold
More informationACCURACY MONITORING AND CALIBARTION OF CNC MACHINES
ACCURACY MONITORING AND CALIBARTION OF CNC MACHINES Ivan Kuric 1, Ivan Ďurica 2, Miroslav Maduda 3 1,2,3 Department of Automation and Production Systems, Faculty of Mechanical Engineering, University of
More informationIntegrated Model-Based Manufacturing for Rapid Product and Process Development
Integrated Model-Based Manufacturing for Rapid Product and Process Development Vesna Mandic 1, Radomir Radisa 2, Vladan Lukovic 1, and Milan Curcic 1 1 Faculty of Engineering University of Kragujevac,
More informationT-SCAN 3 3D DIGITIZING
T-SCAN 3 3D DIGITIZING 2 T-SCAN 3: THE HANDHELD LASER SCANNER Launching the innovative concept of an intuitive-to-use high-precision laser scanner a few years ago, Steinbichler Optotechnik, as the first
More information3D REVERSE ENGINEERING software
3D REVERSE ENGINEERING software PRODUCT WORKFLOWS GEOMAGIC STUDIO WORKFLOW Scan and Probe Collect 3D point cloud and probe data from physical objects to form the basis of the new 3D model. Process Use
More informationReality Capture. Customer Case
Reality Capture Customer Case Reality Capture customer case: MP-Map Oy Surveying company using FARO laser scanners MP-Map Oy is a construction surveying company with over 30 years of surveying experience
More informationPowerINSPECT. Measuring and Evaluation Software. Messtechnik
Measuring and Evaluation Software Messtechnik Universal 3D measuring and evaluation software Fields of Application Hardware independent for manual and CNC-controlled machines PowerINSPECT The User-Friendly
More informationGeometry Compare and Validation For QA
Geometry Compare and Validation For QA Introducing MagicCheck Craig Dennis & Larry Kuehn GPDIS_2012.ppt 1 About TransMagic Founded in 2001 Developers of 3D interoperability, repair, validation & reporting
More informationMarc De Bruyne 3D Design Improvement Leader, DOW Chemical
Marc De Bruyne 3D Design Improvement Leader, DOW Chemical John Foster Director, Profox Companies DOW Chemical Terneuzen in the Netherlands Globally, second largest DOW site after Freeport US. Producing
More informationIncreasing the accuracy with a rich sensor system for robotic laser osteotomy
Increasing the accuracy with a rich sensor system for robotic laser osteotomy Holger Mönnich moennich@ira.uka.de Daniel Stein dstein@ira.uka.de Jörg Raczkowsky rkowsky@ira.uka.de Heinz Wörn woern@ira.uka.de
More informationSANGAM PROJECT BROCHURE:
SANGAM PROJECT BROCHURE: Real-Time 3D Object Reconstruction using Kinect By: Sudharshan Suresh Narendar Sriram Senthil Hariharan Anjana Gayathri Spider R & D Introduction In a year where astronauts in
More informationVTube-LASER Quick Start Guide for FARO QUANTUM from a Traditional Tube Print
VTube-LASER Quick Start Guide for FARO QUANTUM from a Traditional Tube Print This guide shows how to setup VTube-LASER from a tube print and then measure and qualify demo tube 4 using a FARO ScanArm. A
More informationScienceDirect. Using of 3D Road Surface Model for Monitoring of Transverse Unevenness and Skid Resistance
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 91 (2014 ) 475 480 XXIII R-S-P seminar, Theoretical Foundation of Civil Engineering (23RSP) (TFoCE 2014) Using of 3D Road Surface
More informationNew Tools in Aircraft Accident Reconstruction to Assist the Insurer. Overview. Overview 4/30/2015
New Tools in Aircraft Accident Reconstruction to Assist the Insurer Steven L. Steve Morris Senior Managing Consultant and Manager of Colorado Operations Engineering Systems Inc (ESI) Overview ESI has reconstructed
More informationPRODUCT BROCHURE TIGO SF. 3D coordinate measuring machine for the shop floor
PRODUCT BROCHURE TIGO SF 3D coordinate measuring machine for the shop floor 2 TIGO SF Coordinate measuring machine for the shop floor ONE FLOW WITH TIGO SF In production you are aiming at a constant flow
More information0 INTRODUCTION. Fig. 1. Atos II optical scanner schematics
Strojniški vestnik - Journal of Mechanical Engineering 57(011)11, 86-833 Paper received: 07.07.010 DOI:10.5545/sv-jme.010.15 Paper accepted: 03.08.011 Possibilities of Using Three-Dimensional Optical Scanning
More informationZEISS O-SELECT Digital Measuring Projector
ZEISS O-SELECT Digital Measuring Projector // O-SELECT MADE BY ZEISS 2 The moment you get total certainty at the push of a button. This is the moment we work for. 3 4 Reliably measure at the push of a
More informationOlympus Imported Auto Parts
Olympus Imported Auto Parts The Finest In Parts For Foreign Cars Delivering Legendary Customer Service since 1977 Welcome To WebDocs A 24/7 online access to Invoice, Proof of Delivery, Credit and Statement
More informationGuideways X axis Precision-manufactured, anodized extruded profile made of light metal. On stabilized, welded steel supports
ZEISS MMZ E Specifications Version: November 2017 System description Type according to ISO 10360-1:2000 Gantry CMM Guideways X axis Precision-manufactured, anodized extruded profile made of light metal
More informationCommon aeronautic components. difficult to cut. Internal geometric features in aeronautic components. Properties of Nickel Alloys
Reverse Engineering Methodology for Free Form Components and Internal Features -Aerospace Applications- Dr. Héctor R. Siller* Escuela de Ingeniería y Ciencias Tecnológico de Monterrey Common aeronautic
More informationABSTRACT I. INTRODUCTION II. METHODS AND MATERIAL
2017 IJSRSET Volume 3 Issue 2 Print ISSN: 2395-1990 Online ISSN : 2394-4099 Themed Section: Engineering and Technology Generating Point Cloud Data by Using CMM for Modeling and Select Proper Cutting Method
More informationVISUALIZATION OF GEOINFORMATION IN DAM DEFORMATION MONITORING
VISUALIZATION OF GEOINFORMATION IN DAM DEFORMATION MONITORING Gergana Antova Abstract This paper introduces laser scanning as an instrument which may be applicable to the field of dam deformation monitoring.
More informationCAMIO7 Multi-sensor CMM software
Ryf AG Bettlachstrasse 2 2540 Grenchen tel 032 654 21 00 fax 032 654 21 09 www.ryfag.ch CAMIO7 Multi-sensor CMM software Productivity-focused metrology software for tactile and 3D laser CMM inspection
More informationThis lab exercise has two parts: (a) scan a part using a laser scanner, (b) construct a surface model from the scanned data points.
1 IIEM 215: Manufacturing Processes I Lab 4. Reverse Engineering: Laser Scanning and CAD Model construction This lab exercise has two parts: (a) scan a part using a laser scanner, (b) construct a surface
More informationTebodin Peters Engineering GmbH
Plant Design using Laserscan www.peters.bilfinger.com WE DESIGN THE FUTURE www.bilfinger.com Planning in existing Plants In revamp and expansion projects for existing plants, an accurate measurement is
More informationKNOW-HOW and SERVICES. Design. Components. Composites. ns motors.com
Design Components Composites www.vi ns motors.com Vins is a small firm of craftsmen founded in Maranello, the heart of the Motor Valley. We deal with the design and manufacturing of innovative and ultralight
More informationCyberGage360 3D SCANNERS. One-Button Automation for 3D Scan Inspection.
CyberGage360 One-Button Automation for 3D Scan Inspection. 3D SCANNERS Unprecedented speed, accuracy and one-button simplicity for non-contact automated 3D scanning inspection. Powered by MRS Technology
More informationMultisensor Coordinate Measuring Machines ZEISS O-INSPECT
Multisensor Coordinate Measuring Machines ZEISS O-INSPECT Having all the necessary options for reliable measurements. ZEISS O-INSPECT // RELIABILITY MADE BY ZEISS 2 The O-INSPECT multisensor measuring
More informationUS foundry Bradken implements optical measuring technology
Application Note US foundry Bradken implements optical measuring technology Location / country: Tacoma / Washington, USA GOM systems: ATOS Triple Scan, TRITOP GOM software: ATOS Professional Sector: Power
More information3D scanning verifies the precision of objects printed on 3D printers
3D scanning verifies the precision of objects printed on 3D printers Quality control: inspection of 3D printed supercar part 3D scanner: MICRON3D green 10 MPix 3D printer: Factory 2.0 Production System
More information11th Laser Metrology for Precision Measurement and Inspection in Industry 2014, September 02-05, 2014, Tsukuba, Japan
A COMPARISON STUDY OF ON-CMM LASER SCANER AND TOUCH TRIGGER PROBE FOR AUTOMOTIVE MEASUREMENT APLICATIONS Ercihan KIRACI 1, Glen A TURLEY 1, Alex ATTRIDGE 1, Alan OLIFENT 2 and Mark A WILLIAMS 1 1 Warwick
More information3D Terrestrial Laser Scanner Innovative Applications for 3D Documentation
3D Terrestrial Laser Scanner Innovative Applications for 3D Documentation Rodney Chaffee Head of Sales, FARO Asia Pacific 3D Laser Scaning Market 2017 2.3 Billion $ 2012 1.3 Billion $ CAGR : > 12% Source:
More informationPanel. Chapter 16. Solar Car. A. Sketch. Step 1. Click File Menu > New, click Part and OK. B. Save as "PANEL". Step 1. Click File Menu > Save As.
Chapter 16 Solar Car Panel A. Sketch. Step 1. Click File Menu > New, click Part and OK. Step 2. Click Top Plane in the Feature Manager and click Sketch from the Content toolbar, Fig. 1. Step 3. Click Center
More informationComparison of point clouds captured with terrestrial laser scanners with different technical characteristic
Comparison of point clouds captured with terrestrial laser scanners with different technical characteristic Janina Zaczek-Peplinska, Maria Elżbieta Kowalska Warsaw University of Technology, Faculty of
More informationCalypso Freeform Overview
2 of 17 The Calypso Free Form Option is used to evaluate 3-D sections of a part. Free Form uses a CAD model to create a scan path, then gather data from the actual part. Using a Profile characteristic,
More informationCalibration of a rotating multi-beam Lidar
The 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems October 18-22, 2010, Taipei, Taiwan Calibration of a rotating multi-beam Lidar Naveed Muhammad 1,2 and Simon Lacroix 1,2 Abstract
More informationDetermination of Deformations of a High-Capacity Tank Using the Technology of Terrestrial Laser Scanning
American International Journal of Contemporary Research Vol. 4, No. 4; April 2014 Determination of Deformations of a High-Capacity Tank Using the Technology of Terrestrial Laser Scanning Katarína Pukanská
More informationTHE TRULY PORTABLE METROLOGY-GRADE 3D SCANNERS
METROLOGY SOLUTIONS THE TRULY PORTABLE METROLOGY-GRADE 3D SCANNERS The HandySCAN 3D TM handheld scanners of new generation have been optimized to meet the needs of product development and engineering professionals
More informationA Comparison Study of 3D Scanners for Diagnosing Deviations in Their Outputs Using Reverse Engineering Technique
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 14, Issue 3 Ver. I (May. - June. 2017), PP 26-32 www.iosrjournals.org A Comparison Study of 3D Scanners
More informationWhat s New In SA CHAPTER
What s New In SA CHAPTER 1 One of the advantages of SpatialAnalyzer is that development occurs at a brisk pace. New feature requests, bug fixes, and changes are implemented quickly, giving you the opportunity
More informationPWO: Faster to Finished Sheet Metal Forming Tools with Optical Metrology
Application Note PWO: Faster to Finished Sheet Metal Forming Tools with Optical Metrology Company s place of business: Oberkirch GOM system: ATOS Triple Scan GOM software: GOM Inspect Professional Sector:
More informationMetrology Overview. Winter JMUM Nellis AFB, NV November 16,
Metrology Overview Winter JMUM Nellis AFB, NV November 16, 2011 http://metrology.survice.com http://www.survice.com About SURVICE SURVICE Engineering was founded with a focus on applying systems engineering
More informationChapter 5: Vulnerability Analysis
Chapter 5: Vulnerability Analysis Technology Brief Vulnerability analysis is a part of the scanning phase. In the Hacking cycle, vulnerability analysis is a major and important part. In this chapter, we
More informationConversion Technology of Clothing Patterns from 3D Modelling to 2D Templates Based on Individual Point-Cloud
Conversion Technology of Clothing Patterns from 3D Modelling to 2D Templates Based on Individual Point-Cloud Abstract Tingyu XU, Huanyun WEI, Yue XIN, Longlin ZHANG* College of Textile & Garment, Southwest
More information