ETERNUS SMI-S User's Guide

Transcription

1 ETERNUS SMI-S User's Guide ETERNUS DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440 S2, ETERNUS DX8100 S2/DX8700 S2

2 This page is intentionally left blank.

3 Preface This manual explains how to set and manage the ETERNUS DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440 S2, or ETERNUS DX8100 S2/DX8700 S2 Disk storage system using SMI-S from software such as storage management client software. This manual is designed for users with knowledge about the basic functions of the ETERNUS DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440 S2, or ETERNUS DX8100 S2/DX8700 S2 Disk storage system, and SMI-S. In this manual, the ETERNUS DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440 S2, and ETERNUS DX8100 S2/ DX8700 S2 Disk storage systems are collectively referred to as "ETERNUS DX Disk storage system". Sixth Edition June 2013 The Structure and Contents of this Manual This manual is composed of the following six chapters and appendices. Chapter 1 Overview This chapter provides an overview of SMI-S. Chapter 2 SMI-S Settings This chapter explains how to enable SMI-S. Chapter 3 Privileges This chapter describes the privileges that are required for connecting to the ETERNUS DX Disk storage system from storage management client software. Chapter 4 Device Configuration Display This chapter describes the classes that represent the device configuration and the associations for the device configuration. Chapter 5 Device Configuration Modifications This chapter describes the interfaces that are used to change the device configuration and return values. Chapter 6 Notification of Device Configuration Modifications This chapter describes notification of changes to the device configuration. "The number of SMI-S that can be simultaneously connected" and "About Using of Open Sources" are provided as appendices. The company names, product names and service names mentioned in this document are registered trademarks or trademarks of their respective companies. 3

4 Table of Contents Chapter 1 Overview Overview Features Accessing SMI-S Supported Version Supported Profiles and Subprofiles Supported Profiles Supported Subprofiles Interop Namespace... 8 Chapter 2 SMI-S Settings 9 Chapter 3 Privileges 10 Chapter 4 Device Configuration Display Device Configuration Display Class List Chapter 5 Device Configuration Modifications List of Device Configuration Change Methods FUJITSU_StorageConfigurationService::CreateOrModifyStoragePool FUJITSU_StorageConfigurationService::DeleteStoragePool FUJITSU_StorageConfigurationService::CreateOrModifyElementFromStoragePool FUJITSU_StorageConfigurationService::ReturnToStoragePool FUJITSU_StorageConfigurationService::CreateOrModifyElementFromElements FUJITSU_StorageConfigurationService::CreateReplica FUJITSU_StorageConfigurationService::ModifySynchronization FUJITSU_ControllerConfigurationService::ExposePaths FUJITSU_ControllerConfigurationService::HidePaths FUJITSU_ControllerConfigurationService::ExposeDefaultLUs FUJITSU_ControllerConfigurationService::HideDefaultLUs FUJITSU_PrimordialStorageCapabilities::CreateSetting

5 Table of Contents FUJITSU_RAIDStorageCapabilities::CreateSetting FUJITSU_PrimordialStoragePool::GetSupportedSizes FUJITSU_PrimordialStoragePool::GetSupportedSizeRange FUJITSU_PrimordialStoragePool::GetAvailableExtents FUJITSU_RAIDStoragePool::GetSupportedSizes FUJITSU_RAIDStoragePool::GetSupportedSizeRange FUJITSU_RAIDStoragePool::GetAvailableExtents FUJITSU_StorageHardwareIDManagementService::CreateStorageHardwareID FUJITSU_StorageHardwareIDManagementService::DeleteStorageHardwareID FUJITSU_ReplicationService::CreateElementReplica FUJITSU_ReplicationService::ModifyReplicaSynchronization FUJITSU_ReplicationService::ModifyListSynchronization FUJITSU_ReplicationService::GetReplicationRelationships FUJITSU_ReplicationServiceCapabilities::ConvertSyncTypeToReplicationType FUJITSU_ReplicationServiceCapabilities::ConvertReplicationTypeToSyncType FUJITSU_ReplicationServiceCapabilities::GetSupportedFeatures FUJITSU_ReplicationServiceCapabilities::GetSupportedCopyStates FUJITSU_ReplicationServiceCapabilities::GetSupportedWaitForCopyStates FUJITSU_ReplicationServiceCapabilities::GetSupportedOperations FUJITSU_ReplicationServiceCapabilities::GetSupportedListOperations FUJITSU_ReplicationServiceCapabilities::GetSupportedMaximum FUJITSU_ReplicationServiceCapabilities::GetDefaultReplicationSettingData FUJITSU_ThinProvisioningCapabilities::CreateSetting FUJITSU_ThinProvisioningPool::GetSupportedSizes FUJITSU_ThinProvisioningPool::GetSupportedSizeRange FUJITSU_ThinProvisioningPool::GetAvailableExtents Chapter 6 Notification of Device Configuration Modifications Notification of Device Configuration Change/Device Errors Notification Conditions Note Appendix A The Number of SMI-S that can be Simultaneously Connected 78 Appendix B About Using of Open Sources 79 5

6 Chapter 1 Overview This chapter provides an overview of the ETERNUS DX Disk storage system SMI-S. 1.1 Overview Storage Management Initiative Specification (SMI-S) is an interface specification designed by the Storage Networking Industry Association (SNIA) to standardize external interfaces that are related to storage system management. SMI-S is installed and configured in the controllers of the ETERNUS DX Disk storage system. SMI-S is accessed from storage management client software using HTTP. 1.2 Features The main features of SMI-S are as follows: Device configuration display SMI-S can be used to notify the device configuration, including disks and volumes. Device configuration change SMI-S can be used to create or delete RAID groups and volumes. SMI-S can also be used to perform Advanced Copy. Notification of device configuration modifications SMI-S can be used to notify when the device configuration is changed such as when a volume is created or deleted. 1.3 Accessing SMI-S SMI-S is accessed using HTTP (port 5988) or HTTPS (port 5989) from the SMI-S client (storage management client software). SMI-S receives requests from the MNT port on the master controller module. 6

7 Chapter 1 Overview 1.4 Supported Version 1.4 Supported Version The supported SMI-S version is "SMI-S 1.4". 1.5 Supported Profiles and Subprofiles The following tables show the profiles and the subprofiles that are supported by SMI-S Supported Profiles Profile name Server Profile Array Profile Profile Registration Profile Replication Services Profile Overview SMI-S server information RAID device model Profile information Copy service Supported Subprofiles Package/Subprofile name Access Points Subprofile Block Service Package Copy Services Subprofile Disk Drive Lite Subprofile Extent Composition Subprofile FC Target port Subprofile Generic Target Ports Profile Health Package iscsi Target Ports Subprofile Masking and Mapping Subprofile Multiple Computer System Subprofile Physical Package Package Serial Attached SCSI Target Ports Subprofile Software Subprofile Thin Provisioning Overview Access point Display and setting of RAID groups and LUNs Copy service Detailed information display of physical disks Volume creation FC target port Device target port Device error status display iscsi target port LUN masking and mapping CM information Physical package SAS target port Software version Thin Provisioning 7

8 Chapter 1 Overview 1.6 Interop Namespace 1.6 Interop Namespace Interop Namespace is "interop". 8

9 Chapter 2 SMI-S Settings This chapter explains how to enable SMI-S. It is necessary to enable the SMI-S setting to use SMI-S. To enable SMI-S, perform either of the following actions: ETERNUS Web GUI: Set the SMI-S setting to "Enable" ETERNUS CLI: Run "set smi-s -function enable" 9

10 Chapter 3 Privileges This chapter describes the privileges that are required for connecting to the ETERNUS DX Disk storage system from storage management client software. For user accounts to connect to the ETERNUS DX Disk storage system from storage management client software, select one of the following role types: Default roles Preset privileges are assigned to the default roles. Admin, Storage Admin, Maintainer, and Software are available as default roles. Custom roles User customized roles are created. All of the privileges that are listed in the following table must be assigned. No. Privilege required 1 Status Display 2 RAID Group Management 3 Volume - Create / Modify 4 Volume - Delete / Format 5 Host Interface Management 6 Advanced Copy Management 7 Copy Session Management 10

11 Chapter 4 Device Configuration Display This chapter describes the device configuration display. 4.1 Device Configuration Display Class List Instance Providers The following table shows the classes (Instance Providers) that represent the device configuration information: No. Class name Description Server Profile (SMI-S server information) 1 FUJITSU_System SMI-S server information 2 FUJITSU_ObjectManager CIM Object Manager (CIMOM) information 3 FUJITSU_Namespace SMI-S Namespace information 4 FUJITSU_CIMXMLCommunication Mechanism Profile Registration Profile (profile information) Communication specification information of the SMI-S server 5 FUJITSU_ProviderSoftwareIdentity SMI-S provider information 6 FUJITSU_RegisteredProfile Supported profile information 7 FUJITSU_RegisteredSubProfile Supported subprofile information Array Profile (RAID device model) 8 FUJITSU_StorageComputerSystem Storage information Access Points Subprofile (access point) 9 FUJITSU_RemoteServiceAccessPoint Storage connection destination information Multiple Computer System Subprofile (CM information) 10 FUJITSU_RedundancySet CM redundancy information 11 FUJITSU_PhysicalMemory Information of memory installed on a CM Software Subprofile (software version) 12 FUJITSU_ControllerModuleSoftware CM firmware information Identity 13 FUJITSU_StorageComputerSystem SoftwareIdentity CM firmware information Disk Drive Lite Subprofile (detailed information display of physical disks) 14 FUJITSU_DiskDrive Disk drive information 15 FUJITSU_DiskExtent Disk drive specification information 16 FUJITSU_PhysicalMedia Hard disk information 17 FUJITSU_DiskSoftwareIdentity Disk firmware information 11

12 Chapter 4 Device Configuration Display 4.1 Device Configuration Display Class List No. Class name Description 18 FUJITSU_StorageRedundancySet Hot spare disk information Extent Composition Subprofile (volume creation) 19 FUJITSU_RAIDCompositeExtent RAID group information 20 FUJITSU_FreeExtent Free space information of a RAID group 21 FUJITSU_PartOfConcatenatedExtent LUN concatenation information 22 FUJITSU_MirroredExtent RAID group (for mirroring) information 23 FUJITSU_ConcatenatedExtent Concatenation volume information 24 FUJITSU_StripingCompositeExtent RLU (striping) information 25 FUJITSU_FlexibleTierExtent Flexible Tier Pool (FTRP) information 26 FUJITSU_FlexibleTierSubExtent Flexible Tier Sub Pool (FTSP) information Masking and Mapping Subprofile (LUN masking and mapping) 27 FUJITSU_ProtocolControllerMasking Details of the host affinity group function Capabilities 28 FUJITSU_PrivilegeManagementService Host affinity group setting function 29 FUJITSU_StorageHardwareID Host information setting function ManagementService 30 FUJITSU_ControllerConfigurationService Masking and Mapping function 31 FUJITSU_AuthorizedPrivilege Host affinity group information 32 FUJITSU_StorageHardwareID Host information 33 FUJITSU_DefaultAuthorizedPrivilege Default host affinity group information 34 FUJITSU_DefaultStorageHardwareID Default host information 35 FUJITSU_LUNMappingController LUN mapping information 36 FUJITSU_AffinityGroupController Affinity group information FC Target Ports Subprofile (FC target port) 37 FUJITSU_FCPort FC port information 38 FUJITSU_SCSIProtocolEndPoint Port information Block Services Package (display and setting of RAID groups and LUNs) 39 FUJITSU_StorageConfigurationService Function to operate a RAID group configuration 40 FUJITSU_StorageConfiguration Capabilities Details of the function to operate a RAID group configuration 41 FUJITSU_StorageVolume Volume information 42 FUJITSU_PrimordialStoragePool Unused area information 43 FUJITSU_PrimordialStorageCapabilities Unused area setting information 44 FUJITSU_RAIDStorageCapabilities RAID group setting information (RAID level information) 45 FUJITSU_StorageSetting Volume setting information 46 FUJITSU_RAIDStoragePool RAID group area information 47 FUJITSU_FlexibleTierPool Flexible Tier Pool (FTRP) area information 48 FUJITSU_FlexibleTierSubPool Flexible Tier Sub Pool (FTSP) area information 49 FUJITSU_FlexibleTierCapabilities Flexible Tier Pool (FTRP) setting information 50 FUJITSU_FlexibleTierSubCapabilities Flexible Tier Sub Pool (FTSP) setting information 12

13 Chapter 4 Device Configuration Display 4.1 Device Configuration Display Class List No. Class name Description Physical Package Package (physical package) 51 FUJITSU_StorageProduct Storage product information 52 FUJITSU_ControllerEnclosure CE information 53 FUJITSU_ControllerSlot CM slot information 54 FUJITSU_ControllerCard CM card information 55 FUJITSU_ChannelAdapterSlot (*2) CA slot information 56 FUJITSU_ChannelAdapterCard (*2) CA card information 57 FUJITSU_DeviceEnclosure DE information 58 FUJITSU_DiskSlot Disk slot information 59 FUJITSU_PhysicalDisk Disk drive physical information 60 FUJITSU_DiskProduct Disk product information 61 FUJITSU_SCU (*1) SCU information 62 FUJITSU_Location Storage location information 63 FUJITSU_PSU PSU information 64 FUJITSU_FAN (*2) Fan information 65 FUJITSU_IOM IOM information 66 FUJITSU_BBU (*3) BBU information 67 FUJITSU_BCU (*2) BCU information 68 FUJITSU_BTU (*2) BTU information 69 FUJITSU_SFP SFP information Health Package (device error status display) 70 FUJITSU_ControllerComputerSystem CM information Serial Attached SCSI Target Ports Subprofile (SAS target port) 71 FUJITSU_SASPort (*1) SAS port information 72 FUJITSU_SASPHY(*1) SASPHY information iscsi Target Ports Subprofile (iscsi target port) 73 FUJITSU_iSCSICapabilities iscsi support information 74 FUJITSU_IPProtocolEndpoint IP protocol layer information 75 FUJITSU_TCPProtocolEndpoint TCP protocol layer information 76 FUJITSU_iSCSIProtocolEndpoint iscsi protocol layer information 77 FUJITSU_iSCSISession iscsi session information 78 FUJITSU_iSCSISessionSettings iscsi session setting information 79 FUJITSU_EthernetPort iscsi port information 80 FUJITSU_iSCSIConnection iscsi connection information 81 FUJITSU_iSCSIConnectionSettings iscsi connection setting information 82 FUJITSU_iSCSISessionStatistics iscsi session statistics information Replication Services Profile (copy service) 83 FUJITSU_ConnectivityCollection Device network summary information 84 FUJITSU_ReplicationService Copy operation function 85 FUJITSU_ReplicationServiceCapabilities Details of a copy operation function 86 FUJITSU_ReplicationSettingData Copy operation setting information 87 FUJITSU_RemoteStorageVolume Volume information of other device 13

14 Chapter 4 Device Configuration Display 4.1 Device Configuration Display Class List No. Class name Description 88 FUJITSU_RemoteSCSIProtocolEndpoint FC/iSCSI port information of the connection destination device Copy Services Subprofile (copy service) 89 FUJITSU_StorageReplicationCapabilities Details of the "StorageConfigurationService" copy function 90 FUJITSU_SDPVExtent Snap Data Pool Volume (SDPV) information 91 FUJITSU_SDPVPool Snap Data Pool Volume (SDPV) area information 92 FUJITSU_SDPVCapabilities Snap Data Pool Volume (SDPV) setting information 93 FUJITSU_SnapDataCompositeExtent Snap Data Pool (SDP) information 94 FUJITSU_SnapDataPool Snap Data Pool (SDP) area information 95 FUJITSU_SnapDataCapabilities Snap Data Pool (SDP) setting information Thin Provisioning Profile (Thin Provisioning function) 96 FUJITSU_ThinProvisioningCapabilities Thin Provisioning Pool (TPP) setting information 97 FUJITSU_ThinProvisioningExtent Thin Provisioning Pool (TPP) information 98 FUJITSU_ThinProvisioningPool Thin Provisioning Pool (TPP) area information 99 FUJITSU_ThinProvisioningFreeExtent Thin Provisioning Pool (TPP) free space information *1: Only for the ETERNUS DX80 S2/DX90 S2 *2: Only for the ETERNUS DX410 S2/DX440 S2 *3: Only for the ETERNUS DX8100 S2/DX8700 S2 14

15 Chapter 4 Device Configuration Display 4.1 Device Configuration Display Class List Association Provider The following table shows the classes (Association Providers) that are associated with the device configuration information: No. Class name Association class 1 FUJITSU_AllocatedFromStoragePool FUJITSU_PrimordialStoragePool FUJITSU_RAIDStoragePool FUJITSU_RAIDStoragePool FUJITSU_StorageVolume FUJITSU_RAIDStoragePool FUJITSU_SDPVPool FUJITSU_SDPVPool FUJITSU_SnapDataPool FUJITSU_SnapDataPool FUJITSU_StorageVolume FUJITSU_RAIDStoragePool FUJITSU_ThinProvisioningPool FUJITSU_ThinProvisioningPool FUJITSU_StorageVolume FUJITSU_FlexibleTierPool FUJITSU_StorageVolume FUJITSU_FlexibleTierPool FUJITSU_FlexibleTierSubPool FUJITSU_RAIDStoragePool FUJITSU_FlexibleTierSubPool 2 CIM_AssociatedComponentExtent FUJITSU_PrimordialStoragePool FUJITSU_DiskExtent FUJITSU_RAIDStoragePool FUJITSU_RAIDCompositeExtent FUJITSU_SDPVPool FUJITSU_SDPVExtent FUJITSU_SnapDataPool FUJITSU_SnapDataCompositeExtent FUJITSU_ThinProvisioningPool FUJITSU_ThinProvisioningExtent FUJITSU_FlexibleTierPool FUJITSU_FlexibleTierExtent FUJITSU_FlexibleTierSubPool FUJITSU_FlexibleTierSubExtent 3 CIM_AssociatedRemainingExtent FUJITSU_RAIDStoragePool FUJITSU_FreeExtent FUJITSU_ThinProvisioningPool FUJITSU_ThinProvisioningFreeExtent 15

16 Chapter 4 Device Configuration Display 4.1 Device Configuration Display Class List No. Class name Association class 4 CIM_AuthorizedSubject FUJITSU_AuthorizedPrivilege FUJITSU_StorageHardwareID FUJITSU_DefaultAuthorizedPrivilege FUJITSU_DefaultStorageHardwareID 5 CIM_AuthorizedTarget FUJITSU_AuthorizedPrivilege FUJITSU_AffinityGroupController FUJITSU_DefaultAuthorizedPrivilege FUJITSU_LUNMappingController 6 CIM_BasedOn FUJITSU_DiskExtent FUJITSU_RAIDCompositeExtent FUJITSU_DiskExtent FUJITSU_MirroredExtent FUJITSU_RAIDCompositeExtent FUJITSU_FreeExtent FUJITSU_RAIDCompositeExtent FUJITSU_StorageVolume FUJITSU_ConcatenatedExtent FUJITSU_StorageVolume FUJITSU_PartOfConcatenatedExtent FUJITSU_ConcatenatedExtent FUJITSU_PartOfConcatenatedExtent FUJITSU_RAIDCompositeExtent FUJITSU_RAIDCompositeExtent FUJITSU_SDPVExtent FUJITSU_SDPVExtent FUJITSU_SnapDataCompositeExtent FUJITSU_RAIDCompositeExtent FUJITSU_ThinProvisioningExtent FUJITSU_ThinProvisioningExtent FUJITSU_StorageVolume FUJITSU_ThinProvisioningExtent FUJITSU_ThinProvisioningFreeExtent FUJITSU_FlexibleTierExtent FUJITSU_StorageVolume FUJITSU_FlexibleTierExtent FUJITSU_FlexibleTierSubExtent FUJITSU_RAIDCompositeExtent FUJITSU_FlexibleTierSubExtent 7 CIM_BindsTo FUJITSU_IPProtocolEndpoint FUJITSU_TCPProtocolEndpoint FUJITSU_TCPProtocolEndpoint FUJITSU_iSCSIProtocolEndpoint 16

17 Chapter 4 Device Configuration Display 4.1 Device Configuration Display Class List No. Class name Association class 8 CIM_CommMechanismForManager FUJITSU_ObjectManager FUJITSU_CIMXMLCommunicationMechanism 9 CIM_ComponentCS FUJITSU_StorageComputerSystem FUJITSU_ControllerComputerSystem 10 CIM_CompositeExtentBasedOn FUJITSU_DiskExtent FUJITSU_RAIDCompositeExtent FUJITSU_MirroredExtent FUJITSU_RAIDCompositeExtent FUJITSU_StripingCompositeExtent FUJITSU_RAIDCompositeExtent FUJITSU_DiskExtent FUJITSU_StripingCompositeExtent 11 CIM_ComputerSystemPackage FUJITSU_ControllerEnclosure FUJITSU_StorageComputerSystem FUJITSU_DeviceEnclosure FUJITSU_StorageComputerSystem FUJITSU_ControllerCard FUJITSU_ControllerComputerSystem 12 CIM_ConcreteComponent FUJITSU_PrimordialStoragePool FUJITSU_DiskExtent FUJITSU_RAIDStoragePool FUJITSU_RAIDCompositeExtent FUJITSU_RAIDStoragePool FUJITSU_FreeExtent FUJITSU_SASPort (*1) FUJITSU_SASPHY (*1) FUJITSU_ThinProvisioningPool FUJITSU_ThinProvisioningExtent FUJITSU_ThinProvisioningPool FUJITSU_ThinProvisioningFreeExtent FUJITSU_FlexibleTierPool FUJITSU_FlexibleTierExtent FUJITSU_FlexibleTierSubPool FUJITSU_FlexibleTierSubExtent 17

18 Chapter 4 Device Configuration Display 4.1 Device Configuration Display Class List No. Class name Association class 13 CIM_ConcreteDependency FUJITSU_ControllerConfigurationService FUJITSU_AffinityGroupController FUJITSU_ControllerConfigurationService FUJITSU_LUNMappingController FUJITSU_StorageHardwareIDManagementService FUJITSU_StorageHardwareID FUJITSU_StorageHardwareIDManagementService FUJITSU_DefaultStorageHardwareID FUJITSU_PrivilegeManagementService FUJITSU_AuthorizedPrivilege FUJITSU_PrivilegeManagementService FUJITSU_DefaultAuthorizedPrivilege FUJITSU_SDPVPool FUJITSU_SDPVExtent FUJITSU_SnapDataPool FUJITSU_SnapDataCompositeExtent FUJITSU_DiskExtent FUJITSU_StorageVolume FUJITSU_ThinProvisioningPool FUJITSU_StorageVolume FUJITSU_FlexibleTierSubPool FUJITSU_StorageVolume 14 CIM_ConcreteIdentity FUJITSU_StorageComputerSystem FUJITSU_RedundancySet 15 CIM_ConnectorOnPackage FUJITSU_DeviceEnclosure FUJITSU_DiskSlot FUJITSU_ControllerEnclosure FUJITSU_ControllerSlot FUJITSU_ControllerEnclosure (*2) FUJITSU_ChannelAdapterSlot (*2) FUJITSU_ControllerEnclosure (*1) FUJITSU_DiskSlot (*1) 16 CIM_Container FUJITSU_ControllerCard (*2) FUJITSU_FAN (*2) FUJITSU_BCU (*2) FUJITSU_BTU (*2) FUJITSU_ChannelAdapterCard (*2) FUJITSU_SFP (*2) FUJITSU_ControllerCard (*1) FUJITSU_SCU (*1) FUJITSU_ControllerCard (*1) FUJITSU_SFP (*1) 18

19 Chapter 4 Device Configuration Display 4.1 Device Configuration Display Class List No. Class name Association class 17 CIM_DeviceSAPImplementation FUJITSU_FCPort FUJITSU_SCSIProtocolEndpoint FUJITSU_EthernetPort FUJITSU_IPProtocolEndpoint FUJITSU_EthernetPort FUJITSU_iSCSIProtocolEndpoint FUJITSU_SASPort (*1) FUJITSU_SCSIProtocolEndpoint (*1) 18 CIM_ElementCapabilities FUJITSU_StorageComputerSystem FUJITSU_ProtocolControllerMaskingCapabilities FUJITSU_PrimordialStoragePool FUJITSU_PrimordialStorageCapabilities FUJITSU_StorageConfigurationService FUJITSU_StorageConfigurationCapabilities FUJITSU_RAIDStoragePool FUJITSU_RAIDStorageCapabilities FUJITSU_StorageComputerSystem FUJITSU_iSCSICapabilities FUJITSU_ReplicationService FUJITSU_ReplicationServiceCapabilities FUJITSU_StorageConfigurationService FUJITSU_StorageReplicationCapabilities FUJITSU_SnapDataPool FUJITSU_SnapDataCapabilities 18 CIM_ElementCapabilities FUJITSU_SDPVPool FUJITSU_SDPVCapabilities FUJITSU_ThinProvisioningPool FUJITSU_StorageConfigurationCapabilities FUJITSU_ThinProvisioningPool FUJITSU_ThinProvisioningCapabilities FUJITSU_FlexibleTierPool FUJITSU_FlexibleTierCapabilities FUJITSU_FlexibleTierSubPool FUJITSU_FlexibleTierSubCapabilities 19

20 Chapter 4 Device Configuration Display 4.1 Device Configuration Display Class List No. Class name Association class 19 CIM_ElementConformsToProfile FUJITSU_RegisteredProfile FUJITSU_ObjectManager FUJITSU_RegisteredProfile FUJITSU_StorageComputerSystem FUJITSU_RegisteredProfile (SMISProfile information) FUJITSU_RegisteredProfile (ServerProfile information) FUJITSU_RegisteredProfile (SMISProfile information) FUJITSU_RegisteredProfile (ArrayProfile information) FUJITSU_RegisteredProfile (SMISProfile information) FUJITSU_RegisteredSubProfile 20 CIM_ElementLocation FUJITSU_StorageComputerSystem FUJITSU_Location 21 CIM_ElementSettingData FUJITSU_StorageVolume FUJITSU_StorageSetting FUJITSU_TCPProtocolEndpoint FUJITSU_iSCSIConnectionSettings FUJITSU_iSCSIProtocolEndpoint FUJITSU_iSCSIConnectionSettings FUJITSU_iSCSIProtocolEndpoint FUJITSU_iSCSISessionSettings FUJITSU_AffinityGroupController FUJITSU_iSCSISessionSettings FUJITSU_LUNMappingController FUJITSU_iSCSISessionSettings FUJITSU_ControllerComputerSystem FUJITSU_iSCSISessionSettings 22 CIM_ElementSoftwareIdentity FUJITSU_DiskSoftwareIdentity FUJITSU_DiskDrive FUJITSU_ProviderSoftwareIdentity FUJITSU_RegisteredProfile FUJITSU_ProviderSoftwareIdentity FUJITSU_RegisteredSubProfile 23 CIM_ElementStatisticalData FUJITSU_iSCSISession FUJITSU_iSCSISessionStatistics 24 CIM_EndpointOfNetworkPipe FUJITSU_TCPProtocolEndpoint FUJITSU_iSCSIConnection FUJITSU_iSCSIProtocolEndpoint FUJITSU_iSCSISession 20

21 Chapter 4 Device Configuration Display 4.1 Device Configuration Display Class List No. Class name Association class 25 CIM_HostedAccessPoint FUJITSU_StorageComputerSystem FUJITSU_RemoteServiceAccessPoint FUJITSU_System FUJITSU_CIMXMLCommunicationMechanism FUJITSU_ControllerComputerSystem FUJITSU_SCSIProtocolEndpoint FUJITSU_ControllerComputerSystem FUJITSU_IPProtocolEndpoint FUJITSU_ControllerComputerSystem FUJITSU_TCPProtocolEndpoint FUJITSU_ControllerComputerSystem FUJITSU_iSCSIProtocolEndpoint 26 CIM_HostedCollection FUJITSU_StorageComputerSystem FUJITSU_ConnectivityCollection 27 CIM_HostedService FUJITSU_StorageComputerSystem FUJITSU_PrivilegeManagementService FUJITSU_StorageComputerSystem FUJITSU_StorageHardwareIDManagementService FUJITSU_StorageComputerSystem FUJITSU_ControllerConfigurationService FUJITSU_StorageComputerSystem FUJITSU_StorageConfigurationService FUJITSU_System FUJITSU_ObjectManager FUJITSU_StorageComputerSystem FUJITSU_ReplicationService 28 CIM_HostedStoragePool FUJITSU_StorageComputerSystem FUJITSU_PrimordialStoragePool FUJITSU_StorageComputerSystem FUJITSU_RAIDStoragePool FUJITSU_StorageComputerSystem FUJITSU_SnapDataPool FUJITSU_StorageComputerSystem FUJITSU_SDPVPool FUJITSU_StorageComputerSystem FUJITSU_ThinProvisioningPool FUJITSU_StorageComputerSystem FUJITSU_FlexibleTierPool FUJITSU_StorageComputerSystem FUJITSU_FlexibleTierSubPool 21

22 Chapter 4 Device Configuration Display 4.1 Device Configuration Display Class List No. Class name Association class 29 CIM_InstalledSoftwareIdentity FUJITSU_ControllerComputerSystem FUJITSU_ControllerModuleSoftwareIdentity FUJITSU_ControllerComputerSystem FUJITSU_StorageComputerSystemSoftwareIdentity 30 CIM_IsSpare FUJITSU_DiskExtent FUJITSU_StorageRedundancySet (Global Hot Spare) FUJITSU_DiskExtent FUJITSU_StorageRedundancySet (Dedicated Hot Spare) 31 CIM_MediaPresent FUJITSU_DiskDrive FUJITSU_DiskExtent 32 CIM_MemberOfCollection FUJITSU_RedundancySet FUJITSU_ControllerComputerSystem FUJITSU_StorageRedundancySet (Global Hot Spare) FUJITSU_DiskExtent FUJITSU_StorageRedundancySet (Dedicated Hot Spare) FUJITSU_DiskExtent FUJITSU_ConnectivityCollection FUJITSU_SCSIProtocolEndpoint FUJITSU_ConnectivityCollection FUJITSU_iSCSIProtocolEndpoint FUJITSU_ConnectivityCollection FUJITSU_RemoteSCSIProtocolEndpoint 33 CIM_MemoryOnCard FUJITSU_ControllerCard FUJITSU_PhysicalMemory 34 CIM_NamespaceInManager FUJITSU_ObjectManager FUJITSU_Namespace 35 CIM_NetworkPipeComposition FUJITSU_iSCSISession FUJITSU_iSCSIConnection 36 CIM_PackagedComponent FUJITSU_PhysicalDisk FUJITSU_PhysicalMedia 22

23 Chapter 4 Device Configuration Display 4.1 Device Configuration Display Class List No. Class name Association class 37 CIM_PackageInChassis FUJITSU_ControllerEnclosure FUJITSU_ControllerCard FUJITSU_ControllerEnclosure (*2) FUJITSU_ChannelAdapterCard (*2) FUJITSU_ControllerEnclosure FUJITSU_PSU FUJITSU_DeviceEnclosure FUJITSU_PhysicalDisk FUJITSU_DeviceEnclosure FUJITSU_PSU FUJITSU_DeviceEnclosure FUJITSU_IOM FUJITSU_ControllerEnclosure (*1) FUJITSU_PhysicalDisk (*1) FUJITSU_ControllerEnclosure (*2) FUJITSU_BCU (*2) FUJITSU_ControllerEnclosure (*3) FUJITSU_FAN (*3) FUJITSU_ControllerEnclosure (*3) FUJITSU_BBU (*3) 38 CIM_PackageInSlot FUJITSU_DiskSlot FUJITSU_PhysicalDisk FUJITSU_ControllerSlot FUJITSU_ControllerCard FUJITSU_ChannelAdapterSlot (*2) FUJITSU_ChannelAdapterCard (*2) 39 CIM_ProductParentChild FUJITSU_StorageProduct FUJITSU_DiskProduct 40 CIM_ProductPhysicalComponent FUJITSU_StorageProduct FUJITSU_ControllerEnclosure FUJITSU_StorageProduct FUJITSU_DeviceEnclosure FUJITSU_DiskProduct FUJITSU_PhysicalDisk 41 CIM_ProtocolControllerForPort FUJITSU_AffinityGroupController FUJITSU_FCPort FUJITSU_LUNMappingController FUJITSU_FCPort 42 CIM_ProtocolControllerForUnit FUJITSU_AffinityGroupController FUJITSU_StorageVolume FUJITSU_LUNMappingController FUJITSU_StorageVolume 23

24 Chapter 4 Device Configuration Display 4.1 Device Configuration Display Class List No. Class name Association class 43 CIM_Realizes FUJITSU_PhysicalDisk FUJITSU_DiskDrive FUJITSU_ChannelAdapterCard (*2) FUJITSU_EthernetPort (*2) FUJITSU_ControllerCard (*1) FUJITSU_SASPort (*1) FUJITSU_ControllerCard (*1) FUJITSU_EthernetPort (*1) FUJITSU_SFP FUJITSU_FCPort FUJITSU_SFP FUJITSU_EthernetPort 44 CIM_RealizesExtent FUJITSU_PhysicalMedia FUJITSU_DiskExtent 45 CIM_ReferencedProfile FUJITSU_RegisteredProfile FUJITSU_RegisteredProfile 46 CIM_ReplicaPoolForStorage FUJITSU_StorageVolume FUJITSU_SnapDataPool 47 CIM_SAPAvailableForElement FUJITSU_SCSIProtocolEndpoint FUJITSU_AffinityGroupController FUJITSU_SCSIProtocolEndpoint FUJITSU_LUNMappingController FUJITSU_RemoteServiceAccessPoint FUJITSU_StorageComputerSystem FUJITSU_iSCSIProtocolEndpoint FUJITSU_AffinityGroupController FUJITSU_iSCSIProtocolEndpoint FUJITSU_LUNMappingController FUJITSU_SCSIProtocolEndpoint FUJITSU_StorageVolume FUJITSU_iSCSIProtocolEndpoint FUJITSU_StorageVolume 48 CIM_ServiceAffectsElement FUJITSU_ReplicationService FUJITSU_ConnectivityCollection 49 CIM_StorageSettingsAssociatedTo Capabilities FUJITSU_RAIDStorageCapabilities FUJITSU_StorageSetting FUJITSU_PrimordialStorageCapabilities FUJITSU_StorageSetting FUJITSU_ThinProvisioningCapabilities FUJITSU_StorageSetting 24

25 Chapter 4 Device Configuration Display 4.1 Device Configuration Display Class List No. Class name Association class 50 CIM_StorageSynchronized FUJITSU_StorageVolume (copy source volume information) FUJITSU_StorageVolume (copy destination volume information) FUJITSU_StorageVolume FUJITSU_RemoteStorageVolume FUJITSU_RemoteStorageVolume FUJITSU_StorageVolume 51 FUJITSU_StorageSynchronized FUJITSU_StorageVolume (copy source volume information) FUJITSU_StorageVolume (copy destination volume information) FUJITSU_StorageVolume FUJITSU_RemoteStorageVolume FUJITSU_RemoteStorageVolume FUJITSU_StorageVolume 52 CIM_SubProfileRequiresProfile FUJITSU_RegisteredProfile FUJITSU_RegisteredSubProfile FUJITSU_RegisteredProfile FUJITSU_RegisteredSubProfile 25

26 Chapter 4 Device Configuration Display 4.1 Device Configuration Display Class List No. Class name Association class 53 CIM_SystemDevice FUJITSU_StorageComputerSystem FUJITSU_AffinityGroupController FUJITSU_StorageComputerSystem FUJITSU_LUNMappingController FUJITSU_StorageComputerSystem FUJITSU_DiskDrive FUJITSU_StorageComputerSystem FUJITSU_DiskExtent FUJITSU_StorageComputerSystem FUJITSU_RAIDCompositeExtent FUJITSU_StorageComputerSystem FUJITSU_ConcatinatedExtent FUJITSU_StorageComputerSystem FUJITSU_StorageVolume FUJITSU_ControllerComputerSystem FUJITSU_FCPort FUJITSU_ControllerComputerSystem FUJITSU_EthernetPort FUJITSU_StorageComputerSystem FUJITSU_MirroredExtent FUJITSU_ControllerComputerSystem (*1) FUJITSU_SASPHY (*1) FUJITSU_StorageComputerSystem FUJITSU_StripingCompositeExtent FUJITSU_StorageComputerSystem FUJITSU_FreeExtent FUJITSU_StorageComputerSystem FUJITSU_PartOfConcatenatedExtent FUJITSU_ControllerComputerSystem (*1) FUJITSU_SASPort (*1) FUJITSU_StorageComputerSystem FUJITSU_ThinProvisioningExtent FUJITSU_StorageComputerSystem FUJITSU_ThinProvisioningFreeExtent FUJITSU_StorageComputerSystem FUJITSU_FlexibleTierExtent FUJITSU_StorageComputerSystem FUJITSU_FlexibleTierSubExtent *1: Only for the ETERNUS DX80 S2/DX90 S2 *2: Only for the ETERNUS DX410 S2/DX440 S2 *3: Only for the ETERNUS DX8100 S2/DX8700 S2 26

27 Chapter 5 Device Configuration Modifications This chapter describes changing the device configuration. 5.1 List of Device Configuration Change Methods The following table shows the methods that are used to change the device configuration: Class name Method name Function overview FUJITSU_Storage ConfigurationService FUJITSU_Controller ConfigurationService FUJITSU_Primordial StorageCapabilities FUJITSU_RAIDStorage Capabilities FUJITSU_Primordial StoragePool FUJITSU_RAIDStorage Pool FUJITSU_Storage HardwareIDManagementSer vice CreateOrModifyStorage Pool DeleteStoragePool CreateOrModifyElement FromStoragePool ReturnToStoragePool CreateOrModifyElement FromElements CreateReplica ModifySynchronization ExposePaths HidePaths ExposeDefaultLUs HideDefaultLUs CreateSetting CreateSetting GetSupportedSizes GetSupportedSizeRange GetAvailableExtents GetSupportedSizes GetSupportedSizeRange GetAvailableExtents CreateStorageHardwareID DeleteStorageHardwareID RAID group creation/update RAID group deletion Volume creation Volume deletion RAID group creation Volume creation Copy session creation Copy session change Affinity group creation Affinity group deletion Volume and host LUN mapping Volume and host LUN unmapping Creation of a template that is consistent with the RAID group setting information Creation of a template that is consistent with the RAID group setting information Acquisition of the supported capacity of a RAID group (unused area) Acquisition of the supported capacity of a RAID group (unused area) Acquisition of a list of the available disks in a RAID group (unused area) Acquisition of the supported capacity of a RAID group Acquisition of the supported capacity of a RAID group Acquisition of a list of the available disks in a RAID group WWW addition WWW deletion 27

28 5.1 List of Device Configuration Change Methods Class name Method name Function overview FUJITSU_Replication Service FUJITSU_Replication ServiceCapabilities FUJITSU_Thin ProvisioningCapabilities FUJITSU_Thin ProvisioningPool CreateElementReplica ModifyReplica Synchronization ModifyList Synchronization GetReplication Relationships ConvertSyncTypeTo ReplicationType ConvertReplicationType ToSyncType GetSupportedFeatures GetSupportedCopy States GetSupportedWaitFor CopyStates GetSupportedOperations GetSupportedList Operations GetSupportedMaximum GetDefaultReplication SettingData CreateSetting GetSupportedSizes GetSupportedSizeRange GetAvailableExtents Copy session creation Copy session change Change of multiple copy sessions Search for the association information for a copy session volume Conversion from SyncType, Mode, and Local/Remote to ReplicationType Conversion from ReplicationType to SyncType, Mode, and Local/Remote Acquisition of the supported copy-related functions Acquisition of the supported CopyStates Acquisition of the value that is supported as the "WaitForCopyState" parameter of the "Create/ Modify" method Acquisition of the value that is supported as the "Operation" parameter of the "ModifyReplicaSynchronization" method Acquisition of the value that is supported as the "Operation" parameter of the "ModifyListSynchronization" method Acquisition of the supported maximum value of the specified element Acquisition of the default copy operation setting information Creation of a template that is consistent with the Thin Provisioning Pool (TPP) area setting information Acquisition of the supported capacity of a Thin Provisioning Pool (TPP) area information Acquisition of the supported capacity of a Thin Provisioning Pool (TPP) area information Acquisition of a list of available disks from the Thin Provisioning Pool (TPP) area information 28

29 This section describes interfaces for the methods to change the device configuration FUJITSU_StorageConfigurationService::CreateOrModifyStoragePool This method is used to create a RAID group or Thin Provisioning Pool (TPP) using the specified RAID group name, RAID level, and disks. When disks are omitted, available disks are automatically selected. Interface Parameters uint32 CreateOrModifyStoragePool( [In] string ElementName, [Out, In] CIM_ConcreteJob REF Job, [In] CIM_StorageSetting REF Goal, [Out, In] uint64 Size, [In] string InPools [ ], [In] string InExtents [ ], [Out, In] CIM_StoragePool REF Pool ) ElementName Job Goal Size InPools InExtents Pool Specifies the name for the RAID group or TPP that is to be created. Not set Specifies the setting values (such as the RAID level) for the RAID group or TPP that is to be created. When NULL is specified, RAID groups are created in the following order: 1: RAID1+0 2: RAID1 3: RAID5 4: RAID6 Specifies the RAID group or TPP capacity (byte) that is to be created. When NULL is specified, the capacity is calculated according to the "Goal" parameter value. When the free space in the RAID group or TPP is smaller than the specified capacity, the "Size Not Supported" error is returned. Specifies the RAID group (unused area). Specifies the disks that are used for the RAID group or TPP that is to be created. When NULL is specified, the available disks are selected according to the "Goal" parameter value. Instance of the created RAID group or TPP 29

30 Return values 0 Success Ends normally 1 Not Supported RAID group (unused area) was not specified. 4 Failed Ends abnormally 5 Invalid Parameter Invalid Parameter 4097 Size Not Supported Free space in the RAID group or TPP is smaller than the specified capacity. Vendor specific error The device is in busy state The device is busy Element Name is in use ElementName is already in use No Thin Provisioning License No Thin Provisioning license Fatal error generic Fatal error (such as Exception) FUJITSU_StorageConfigurationService::DeleteStoragePool This method is used to delete a specified RAID group or Thin Provisioning Pool (TPP). Interface uint32 DeleteStoragePool( [Out, In] CIM_ConcreteJob REF Job, [In] CIM_StoragePool REF Pool ) Parameters Job Pool Not set Specifies the RAID group or TPP that is to be deleted When NULL or RAID group (unused area) is specified, the "Invalid Parameter" error is returned. Return values 0 Success Ends normally 4 Failed Ends abnormally 5 Invalid Parameter Invalid Parameter Vendor specific error The RAID group is in busy state The RAID group that is to be deleted is in use The device is in busy state The device is busy The RAID group is not operative Disk Buffer is set in the RAID group The RAID group has Thin Provisioning volumes The RAID group that is to be deleted includes Thin Provisioning Volumes. 30

31 32808 No Thin Provisioning License No Thin Provisioning license Fatal error generic Unexpected error FUJITSU_StorageConfigurationService::CreateOrModifyElementFrom StoragePool This method is used to create a volume in a specified RAID group or Thin Provisioning Pool (TPP). Interface uint32 CreateOrModifyElementFromStoragePool( [In] string ElementName, [In] uint16 ElementType, [Out, In] CIM_ConcreteJob REF Job, [In] CIM_ManagedElement REF Goal, [Out, In] uint64 Size, [In] CIM_StoragePool REF InPool, [Out, In] CIM_LogicalElement REF TheElement ) Parameters ElementName ElementType Job Goal Size Specifies the name of the volume that is to be created. Specifies the element that is to be created. Only "2" (volume) or "5" (Thin Provisioning Volume (TPV)) can be specified. When NULL or values other than "2" (volume) or "5" (Thin Provisioning Volume (TPV)) are specified, the "Method Not Supported" error is returned. Not set Not used [In] Specifies the capacity of the volume that is to be created in bytes. When NULL is specified, the "Invalid Parameter" error is returned. When the free space in the volume is smaller than the specified capacity, the "Size Not Supported" error is returned. When a TPV is specified for the element, an error does not occur even if the specified capacity is larger than the actual free space because the specified capacity is set as the virtual size. [Out] The capacity of a created volume is set in bytes. When the free space in the volume is smaller than the specified capacity, the "Size Not Supported" error is returned and the capacity of the current free space is set. 31

32 InPool TheElement Specifies the RAID group or TPP from which the volume is to be created. When NULL or RAID group (unused area) is specified, the "Invalid Parameter" error is returned. [In] Creates a volume when NULL is specified. When a value other than NULL is specified and a volume is specified for "ElementType", the "Not Supported" error is returned. When a value other than NULL is specified and a TPV is specified for "ElementType", the specified TPV is expanded. [Out] The created or expanded volume is set. Return values 0 Success Ends normally 1 Method Not Supported Unsupported error 4 Failed Ends abnormally 5 Invalid Parameter Invalid Parameter 4097 Size Not Supported The free space in the RAID (group) is smaller than the specified capacity. Vendor specific error Maximum number of Logical Volume in a RAID group has been reached Maximum number of Logical Volume in the storage device has been reached The maximum number of volumes has already been created in the specified RAID group. The maximum number of volumes has already been created in the device The RAID group is in busy state The RAID group is busy The Logical Volume is in busy state The volume is busy The device is in busy state The device is busy Element Name is in use Element Name is already in use Quick Format Error Quick Format error occurred The RAID group is not operative MLU, MVV, TPPV, TPPC, and RDBV already exist in the specified RAID group No Thin Provisioning License No Thin Provisioning license Fatal error generic Fatal error (such as Exception) 32

33 5.2.4 FUJITSU_StorageConfigurationService::ReturnToStoragePool This method is used to delete a specified volume. Interface uint32 ReturnToStoragePool( [Out, In] CIM_ConcreteJob REF Job, [In] CIM_LogicalElement REF TheElement ) Parameters Job TheElement Not set Specifies the volume that is to be deleted. When NULL is specified, the "Invalid Parameter" error is returned. Return values 0 Success Ends normally 1 Method Not Supported Unsupported error 4 Failed Ends abnormally 5 Invalid Parameter Invalid Parameter Vendor specific error The RAID group is in busy state The RAID group is in use The Logical Volume is in busy state The volume is in use The device is in busy state The device is busy The Logical Volume is Mainframe The volume is a MLU/MVV. volume The Logical Volume is not operative The volume is a TPPV The Logical Element is ODX volume The volume that is specified for "SourceElement" or "TargetElement" is dedicated for Offloaded Data Transfer Fatal error generic Fatal error (such as Exception) 33

34 5.2.5 FUJITSU_StorageConfigurationService::CreateOrModifyElementFrom Elements This method is used to create a RAID group, TPP, or volume. Interface uint32 CreateOrModifyElementFromElements( [In] string ElementName, [In] uint16 ElementType, [Out, In] CIM_ConcreteJob REF Job, [In] CIM_ManagedElement REF Goal, [Out, In] uint64 Size, [In] CIM_StorageExtent REF InElements [ ], [Out, In] CIM_LogicalElement REF TheElement ) Parameters ElementName ElementType Job Goal Specifies the name of the volume, the RAID group, or the TPP that is to be created. Specifies the element that is to be created. Only "2" (volume), "4" (RAID group), or "6" (Thin Provisioning Volume (TPV)) can be specified. When NULL is specified, the "Invalid Parameter" error is returned. When a value other than "2" (volume), "4" (RAID group), or "6" (TPV) is specified, the "Not Supported" error is returned. Not set Specifies the setting value of the volume, the RAID group, or the TPP that is to be created. Example: For RAID1+0 "FUJITSU_StorageSetting.InstanceID=FUJITSU:SS_RAID1+0" When "2" (volume) or "6" (TPV) is specified for "ElementType", this parameter is not used since this parameter depends on the RAID group specification. In addition, when NULL is specified while "4" (RAID group) is specified for "ElementType", a RAID group is created according to the PriorityRAID level that is obtained from the model name. 34

35 Size InElements TheElement [In] Specifies the capacity of the volume, the RAID group, or the TPP that is to be created in bytes. When NULL is specified, free space is calculated and the volume, the RAID group, or the TPP is created using all the free space. When the free space in the RAID group, the TPP, or the disk is smaller than the specified capacity, the "Size Not Supported" error is returned. When a TPV is specified for the element, an error does not occur even if the specified capacity is larger than the actual free space because the specified capacity is set as the virtual size. [Out] The capacity of a created volume, RAID group, or TPP is set in bytes. When NULL is specified while "2" (volume) or "6" (TPV) is specified for "ElementType", the "Fatal error -- generic" error is returned. In addition, when the free space in the volume is smaller than the specified capacity, the "Size Not Supported" error is returned and the capacity of the current free space is set. Specifies the source StorageExtent (free space or disk) from which a volume a RAID group, or a TPP is to be created. When NULL or blank data is specified, the "Invalid Parameter" error is returned. [In] Creates a new volume a new RAID group, or a new TPP when NULL is specified. When a value other than NULL is specified: When "6" (TPV) is specified for "ElementType", the TPV is expanded. When a TPP is specified, the specified TPP is expanded. When a volume or a RAID group is specified, the "Method Not Supported" error is returned. [Out] The created volume, RAID group, or TPP is set. Return values 0 Completed with No Error Ends normally 1 Method Not Supported Unsupported error 4 Failed Ends abnormally 5 Invalid Parameter Invalid Parameter 4097 Size Not Supported The free space in the volume, the RAID group, or the TPP is smaller than the specified capacity. Vendor specific error Maximum number of Logical Volume in a RAID group has been reached Maximum number of Logical Volume in the storage device has been reached The maximum number of volumes has already been created in the specified RAID group. The maximum number of volumes has already been created in the device The device is in busy state The device is busy Element Name is in use Element Name is already in use. 35

36 32796 Quick Format Error Quick Format occurred The RAID group is not operative MLU, MVV, TPPV, TPPC, and RDBV already exist in the specified RAID group No Thin Provisioning License No Thin Provisioning license Fatal error generic Fatal error (such as Exception) FUJITSU_StorageConfigurationService::CreateReplica This method is used to start the SnapOPC+/EC/REC copy sessions. Interface uint32 CreateReplica( [In] string ElementName, [Out] CIM_ConcreteJob REF Job, [In] CIM_LogicalElement REF SourceElement, [Out] CIM_LogicalElement REF TargetElement, [In] CIM_StorageSetting REF TargetSettingGoal, [In] CIM_StoragePool REF TargetPool [In] uint16 CopyType ) Parameters ElementName Job SourceElement TargetElement TargetSettingGoal TargetPool CopyType Specifies "ElementName" to assign to the copy destination volume that is to be created. When this parameter is omitted, "ElementName" is automatically assigned. Not set Specifies the copy source volume. Specifies the copy destination volume. Specifies "StorageSetting" to be associated with "TargetPool". Not used Specifies the RAID group that includes the copy source volume to be created. When this parameter is omitted, RAID groups are selected in ascending order starting from the smallest "RaidNumber" in "RAIDStoragePool" in which the copy destination volume can be created. Specifies the copy type that is to be created. "3" (EC) or "4" (SnapOPC) can be specified. 36

37 Allowed parameter settings for each copy type Parameters EC SnapOPC CopyType 3(Sync) 4(UnSyncAssoc) ElementName Optional Optional SourceElement Required Required TargetElement Not required Not required TargetPool Optional Optional Return values For return values that are not listed in the following table, refer to the values that are listed from Vendor Specific onward in the Return Values table of " FUJITSU_ReplicationService::CreateElementReplica" (page 53). 0 Completed with No Error Ends normally 1 Not Supported Not supported 4 Failed Ends abnormally 5 Invalid Parameter Invalid Parameter FUJITSU_StorageConfigurationService::ModifySynchronization This method is used to change a copy session (suspend, resume, reverse, and end). Interface uint32 ModifySynchronization( [In] uint16 Operation, [Out] CIM_ConcreteJob REF Job, [In] CIM_StorageSynchronized REF Synchronization ) Parameters Operation Job Synchronization Specifies the copy operation. "2" (Detach), "3" (Fracture), "4" (Resync), or "5" (Restore) can be specified. For details on the available Operation values for each copy type, refer to "Allowed parameter settings for each copy type" (page 38). Not set Specifies the association information of a target copy volume. 37

38 Allowed parameter settings for each copy type Copy type Action Operation EC/REC Suspend 3(Fracture) Resume (*1) 4(Resync) Restore 5(Restore) (reverse + resume) (*1) Stop 2(Detach) SnapOPC/SnapOPC+ Restore 5(Restore) Stop 2(Detach) *1: Execution in Suspend status Return values Refer to the values that are listed in the Return Values table of " FUJITSU_ReplicationService::ModifyReplicaSynchronization" (page 58) because the return values are the same as these values FUJITSU_ControllerConfigurationService::ExposePaths This method is used to create an affinity group, to add a logical volume initiator to a specified affinity group, or to perform mapping between logical volumes and host LUNs. CA ports cannot be added to the specified affinity group since only "One Port per View" is supported as the view type. Interface Parameters uint32 ExposePaths( [Out, In] CIM_ConcreteJob REF Job, [In] string LUNames [ ], [In] string InitiatorPortIDs [ ], [In] string TargetPortIDs [ ], [In] string DeviceNumbers [ ], [In] uint16 DeviceAccesses [ ], [Out, In] CIM_SCSIProtocolController REF ProtocolControllers [ ] ) Job LUNames InitiatorPortIDs Not set A list of the volumes that are to be mapped Specifies the "Name" property values of "FUJITSU_StorageVolume". The number of elements must be the same as "DeviceAccesses". A list of the initiator (host) port IDs that are to be mapped Specifies the "StorageID" property values of "FUJITSU_StorageHardwareID". If an initiator does not exist, an initiator is registered. 38