TABLE OF CONTENTS 1 FISH BEGINNER S GUIDE 2 FISH REFERENCE. FISH in FLAC Contents Introduction Tutorial
|
|
- Corey Houston
- 5 years ago
- Views:
Transcription
1 FISH in FLAC Contents - 1 TABLE OF CONTENTS 1 FISH BEGINNER S GUIDE 1.1 Introduction Tutorial FISH REFERENCE 2.1 Introduction and Overview FISH Language Rules, Variables and Functions Lines Names for Functions and Variables; Potential Conflicts Scope of Variables Functions: Structure, Evaluation and Calling Scheme Data Types Arithmetic: Expressions and Type Conversions Strings Deleting and Redefining FISH Functions FISH Statements Specification Statements Control Statements FLAC Command Execution Linkages to FLAC Modified FLAC Commands Execution of FISH Functions Error Handling FISHCALL Pre-defined Functions, Variables and Arrays FLAC-Specific Scalar Variables Use of Variable fos f General Scalar Variables FLAC-Specific Model Variables Gridpoint Variables Zone Variables Strain Calculations FLAC Constitutive Model Variables Intrinsic Functions
2 Contents - 2 FISH in FLAC Special Functions Tables, Arrays and Memory Access Tables Special Array Functions Special Functions to Access Memory Directly Special Functions to Communicate Parameters Access to FLAC s Data Structures FISH I/O Routines Socket I/O Routines Coupled FLAC and PFC 2D Simulation User-Defined Constitutive Models Introduction and Overview Model Definition and Use User-Defined Local Property Variables State Variables Operations to Be Performed by the UDM: Use of mode Variable Averaging of Sub-Zone Variables: Use of zsub Variable FRIEND Functions for Constitutive Models Hints and Suggestions The Optimizer Principles of Operation Use of the OPT Command Restrictions Suggestions Warning LIBRARY OF FISH FUNCTIONS 4 PROGRAM GUIDE 4.1 Linked-List Sizes and Offsets Example.FIN File
3 FISH in FLAC Contents - 3 TABLES Table 1.1 Commands that directly refer to FISH names Table 2.1 List of words in FLAC and FISH that may conflict with chosen names Table 2.2 Assigned fishcall IDs Table 3.1 Model generation FISH functions Table 3.2 General utility FISH functions Table 3.3 Plotting FISH functions Table 3.4 Solution control FISH functions Table 3.5 Constitutive model FISH functions Table 3.6 Groundwater analysis FISH functions Table 3.7 Special purpose FISH functions Table 4.1 Global pointers and include file names
4 Contents - 4 FISH in FLAC FIGURES Figure 2.1 Initial particle assembly and walls that form deformable punch Figure 2.2 Final state from PFC 2D Figure 2.3 Final state from FLAC
5 FISH in FLAC Contents - 5 EXAMPLES Example 1.1 Defining a FISH function Example 1.2 Using a variable Example 1.3 SETting variables Example 1.4 Test your understanding of function and variable names Example 1.5 Capturing the history of a FISH variable Example 1.6 FISH functions to calculate bulk and shear moduli Example 1.7 Using symbolic variables in FLAC input Example 1.8 Controlled loop in FISH Example 1.9 Applying a nonlinear initial distribution of moduli Example 1.10 Splitting lines Example 1.11 Variable types Example 1.12 Action of the IF ELSE ENDIF construct Example 1.13 Automated placing of beam elements Example 1.14 Movie of load acting on beam Example 2.1 Initializing and printing FISH arrays Example 2.2 Construction of a function Example 2.3 A recursive function call Example 2.4 Removing recursion from the function shown in Example Example 2.5 Evaluation of variables Example 2.6 Control of interactive input Example 2.7 Replacing FISH functions with the same name Example 2.8 Usage of the CASE construct Example 2.9 FISH function with generic mesh handling capability Example 2.10 Using string variables Example 2.11 Controlling a series of FLAC runs Example 2.12 Using the Error Handler to control a run Example 2.13 Illustration of fishcall use Example 2.14 Example use of fos f Example 2.15 Strain calculations Example 2.16 Use of table functions Example 2.17 Setting array size Example 2.18 Using the matrix inversion function Example 2.19 Accessing FLAC s data structures Example 2.20 Using the FISH I/O functions Example 2.21 Server log file Example 2.22 Client log file Example 2.23 PFC 2D initialization file for coupled FLAC/PFC 2D example Example 2.24 FLAC initialization and run file for coupled FLAC/PFC 2D example
6 Contents - 6 FISH in FLAC Example 2.25 PFC 2D run file for coupled FLAC/PFC 2D example Example 2.26 Installing a user-defined constitutive model Example 2.27 Assigning model numbers to user-defined constitutive models Example 2.28 Using local property variables Example 2.29 FISH constitutive model for isotropic elastic behavior Example 2.30 Applying the FISH elastic model Example 2.31 Storing average volumetric strain Example 2.32 Demonstration of FRIEND logic Example 4.1 Interface structure file INT.FIN Example 4.2 Accessing FLAC s data structure via a.fin file
FISH BEGINNER S GUIDE FISH BEGINNER S GUIDE. 1.1 Introduction
FISH BEGINNER S GUIDE 1-1 1 FISH BEGINNER S GUIDE 1.1 Introduction FISH is a programming language embedded within FLAC that enables the user to define variables and functions. These functions may be used
More information3DEC 3DEC ITASCA ITASCA VERSION 5.0 VERSION 5.0
ITASCA Consulting Group, Inc. An Itasca International Company 3DEC VERSION 5.0 Advanced, Three Dimensional Discrete Element Modeling for Geotechnical Analysis of Rock, Blocky Structures and Structural
More informationExample Application 4. Undrained Cylindrical Cavity Expansion in a Cam-Clay Medium
Example Application 4 Undrained Cylindrical Cavity Expansion in a Cam-Clay Medium 1 Cylindrical Cavity Model Geometry 2 Saturated Clay Properties Cam-Clay Model 3 Modeling Procedure Step 1 Step 2 Step
More informationHuei-Huang Lee. Programming with MATLAB2016 SDC ACCESS CODE. Better Textbooks. Lower Prices. UNIQUE CODE INSIDE
Programming with Huei-Huang Lee MATLAB2016 SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com ACCESS CODE UNIQUE CODE INSIDE Powered by TCPDF (www.tcpdf.org) Visit the following
More informationP.G.TRB - COMPUTER SCIENCE. c) data processing language d) none of the above
P.G.TRB - COMPUTER SCIENCE Total Marks : 50 Time : 30 Minutes 1. C was primarily developed as a a)systems programming language b) general purpose language c) data processing language d) none of the above
More informationPROGRAMMING AND ENGINEERING COMPUTING WITH MATLAB Huei-Huang Lee SDC. Better Textbooks. Lower Prices.
PROGRAMMING AND ENGINEERING COMPUTING WITH MATLAB 2018 Huei-Huang Lee SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationProblem description. The FCBI-C element is used in the fluid part of the model.
Problem description This tutorial illustrates the use of ADINA for analyzing the fluid-structure interaction (FSI) behavior of a flexible splitter behind a 2D cylinder and the surrounding fluid in a channel.
More informationFISH BEGINNER S GUIDE FISH BEGINNER S GUIDE. 1.1 Introduction and Overview
FISH BEGINNER S GUIDE 1-1 1 FISH BEGINNER S GUIDE 1.1 Introduction and Overview FISH is a programming language embedded within UDEC that enables the user to define variables and functions. These functions
More informationSUBMERGED CONSTRUCTION OF AN EXCAVATION
2 SUBMERGED CONSTRUCTION OF AN EXCAVATION This tutorial illustrates the use of PLAXIS for the analysis of submerged construction of an excavation. Most of the program features that were used in Tutorial
More informationSliding Split Tube Telescope
LESSON 15 Sliding Split Tube Telescope Objectives: Shell-to-shell contact -accounting for shell thickness. Creating boundary conditions and loads by way of rigid surfaces. Simulate large displacements,
More informationFLAC/Slope User s Guide Contents - 1
FLAC/Slope User s Guide Contents - 1 TABLE OF CONTENTS 1 FLAC/SLOPE 1.1 Introduction... 1-1 1.1.1 Overview... 1-1 1.1.2 Guide to the FLAC/Slope Manual... 1-2 1.1.3 Summary of Features... 1-2 1.1.4 Analysis
More informationLearning Objectives. C++ For Artists 2003 Rick Miller All Rights Reserved xli
Identify and overcome the difficulties encountered by students when learning how to program List and explain the software development roles played by students List and explain the phases of the tight spiral
More information12- User-Defined Material Model
12- User-Defined Material Model In this version 9.0 of Phase2 (RS 2 ), users can define their own constitutive model and integrate the model into the program by using a dynamic-linking library (dll). The
More informationPLAXIS 2D - SUBMERGED CONSTRUCTION OF AN EXCAVATION
PLAXIS 2D - SUBMERGED CONSTRUCTION OF AN EXCAVATION 3 SUBMERGED CONSTRUCTION OF AN EXCAVATION This tutorial illustrates the use of PLAXIS for the analysis of submerged construction of an excavation. Most
More informationSETTLEMENT OF A CIRCULAR FOOTING ON SAND
1 SETTLEMENT OF A CIRCULAR FOOTING ON SAND In this chapter a first application is considered, namely the settlement of a circular foundation footing on sand. This is the first step in becoming familiar
More informationVOLCANIC DEFORMATION MODELLING: NUMERICAL BENCHMARKING WITH COMSOL
VOLCANIC DEFORMATION MODELLING: NUMERICAL BENCHMARKING WITH COMSOL The following is a description of the model setups and input/output parameters for benchmarking analytical volcanic deformation models
More informationAnalysis Steps 1. Start Abaqus and choose to create a new model database
Source: Online tutorials for ABAQUS Problem Description The two dimensional bridge structure, which consists of steel T sections (b=0.25, h=0.25, I=0.125, t f =t w =0.05), is simply supported at its lower
More informationFOUNDATION IN OVERCONSOLIDATED CLAY
1 FOUNDATION IN OVERCONSOLIDATED CLAY In this chapter a first application of PLAXIS 3D is considered, namely the settlement of a foundation in clay. This is the first step in becoming familiar with the
More information6 AUTOMATIC REZONING AUTOMATIC REZONING Introduction
AUTOMATIC REZONING 6-1 6 AUTOMATIC REZONING 6.1 Introduction When FLAC is run in large strain mode, the grid may become distorted to such an extent that the simulation halts with a bad geometry error message.
More informationFEA Applications I MET 415 Review Course Structure: 15 week course Weekly Schedule 50 minute lecture 2.5 hour laboratory 50 minute lecture
FEA Applications I MET 415 Review Course Structure: 15 week course Weekly Schedule 50 minute lecture 2.5 hour laboratory 50 minute lecture Goal: Obtain feedback from Industry Users on course presentation
More informationGuidelines for proper use of Plate elements
Guidelines for proper use of Plate elements In structural analysis using finite element method, the analysis model is created by dividing the entire structure into finite elements. This procedure is known
More informationAPPENDIX B. PBEAML Exercise. MSC.Nastran 105 Exercise Workbook B-1
APPENDIX B PBEAML Exercise MSC.Nastran 105 Exercise Workbook B-1 B-2 MSC.Nastran 105 Exercise Workbook APPENDIX B PBEAML Exercise Exercise Procedure: 1. Create a new database called pbeam.db. File/New...
More informationCSE 504: Compiler Design. Runtime Environments
Runtime Environments Pradipta De pradipta.de@sunykorea.ac.kr Current Topic Procedure Abstractions Mechanisms to manage procedures and procedure calls from compiler s perspective Runtime Environment Choices
More informationLesson 6: Assembly Structural Analysis
Lesson 6: Assembly Structural Analysis In this lesson you will learn different approaches to analyze the assembly using assembly analysis connection properties between assembly components. In addition
More informationModule 1: Introduction to Finite Element Analysis. Lecture 4: Steps in Finite Element Analysis
25 Module 1: Introduction to Finite Element Analysis Lecture 4: Steps in Finite Element Analysis 1.4.1 Loading Conditions There are multiple loading conditions which may be applied to a system. The load
More informationTUTORIAL 7: Stress Concentrations and Elastic-Plastic (Yielding) Material Behavior Initial Project Space Setup Static Structural ANSYS ZX Plane
TUTORIAL 7: Stress Concentrations and Elastic-Plastic (Yielding) Material Behavior In this tutorial you will learn how to recognize and deal with a common modeling issues involving stress concentrations
More informationEngine Gasket Model Instructions
SOL 600 Engine Gasket Model Instructions Demonstrated:! Set up the Model Database! 3D Model Import from a MSC.Nastran BDF! Creation of Groups from Element Properties! Complete the Material Models! Import
More informationFREE VIBRATION AND EARTHQUAKE ANALYSIS OF A BUILDING
14 FREE VIBRATION AND EARTHQUAKE ANALYSIS OF A BUILDING This example demonstrates the natural frequency of a five-storey building when subjected to free vibration and earthquake loading. The building consists
More informationPlane strain conditions, 20 mm thick. b a. Material properties: E aa= N/mm2 Interface properties: G IC=0.28 N/mm E =E 00 N/mm2.
Problem description The figure shows a double cantilever beam (DCB) of a composite material, subjected to displacement loads at its ends. u All lengths in mm. Not drawn to scale. Plane strain conditions,
More informationFlexible multibody systems - Relative coordinates approach
Computer-aided analysis of multibody dynamics (part 2) Flexible multibody systems - Relative coordinates approach Paul Fisette (paul.fisette@uclouvain.be) Introduction In terms of modeling, multibody scientists
More informationLimitations of smeared crack models for dynamic analysis of concrete
12 th International LS-DYNA Users Conference Constitutive Modeling(3) Limitations of smeared crack models for dynamic analysis of concrete Yoeng Sin Khoe and Jaap Weerheijm TNO PO Box 4, 2280AA Rijswijk
More informationDESIGN AND ANALYSIS OF MEMBRANE STRUCTURES IN FEM-BASED SOFTWARE MASTER THESIS
DESIGN AND ANALYSIS OF MEMBRANE STRUCTURES IN FEM-BASED SOFTWARE MASTER THESIS ARCHINEER INSTITUTES FOR MEMBRANE AND SHELL TECHNOLOGIES, BUILDING AND REAL ESTATE e.v. ANHALT UNIVERSITY OF APPLIED SCIENCES
More informationEmbedded Reinforcements
Embedded Reinforcements Gerd-Jan Schreppers, January 2015 Abstract: This paper explains the concept and application of embedded reinforcements in DIANA. Basic assumptions and definitions, the pre-processing
More informationMIDAS Geotechnical Training Series
MIDAS Geotechnical Training Series Fully Coupled vs Consolidation Analysis Seongwan Bae Angel F. Martinez MIDAS Information Technology Integrated Solver Optimized for the next generation 6-bit platform
More informationChassis Design using Composite Materials MBS-Modeling and Experiences
Chassis Design using Composite Materials MBS-Modeling and Experiences Udo Piram Bernd Austermann Uwe Heitz Calculations and Simulations System Functions ZF Friedrichshafen AG Chassis Design using Composite
More informationCIVIL MANUFACTURING MINING OIL & GAS POWER GENERATION
CIVIL MANUFACTURING MINING OIL & GAS POWER GENERATION ICG14-BRO-UDEC600-US-3 ABOUT UDEC The Universal Distinct Element Code (UDEC) is two-dimensional numerical software that simulates the response of loading
More informationLinear Bifurcation Buckling Analysis of Thin Plate
LESSON 13a Linear Bifurcation Buckling Analysis of Thin Plate Objectives: Construct a quarter model of a simply supported plate. Place an edge load on the plate. Run an Advanced FEA bifurcation buckling
More informationCE366/ME380 Finite Elements in Applied Mechanics I Fall 2007
CE366/ME380 Finite Elements in Applied Mechanics I Fall 2007 FE Project 1: 2D Plane Stress Analysis of acantilever Beam (Due date =TBD) Figure 1 shows a cantilever beam that is subjected to a concentrated
More information4 GRID GENERATION GRID GENERATION General Comments
GRID GENERATION 4-1 4 GRID GENERATION 4.1 General Comments Unlike many modeling programs based on the finite element method, FLAC organizes its zones (or elements ) in a row-and-column fashion, like a
More informationCHAPTER 4. Numerical Models. descriptions of the boundary conditions, element types, validation, and the force
CHAPTER 4 Numerical Models This chapter presents the development of numerical models for sandwich beams/plates subjected to four-point bending and the hydromat test system. Detailed descriptions of the
More informationTHERMAL EXPANSION OF A NAVIGABLE LOCK
THERMAL EXPANSION OF A NAVIGABLE LOCK 15 THERMAL EXPANSION OF A NAVIGABLE LOCK A navigable lock is temporarily 'empty' due to maintenance. After some time there is significant increase of the air temperature,
More informationME 475 FEA of a Composite Panel
ME 475 FEA of a Composite Panel Objectives: To determine the deflection and stress state of a composite panel subjected to asymmetric loading. Introduction: Composite laminates are composed of thin layers
More informationSolid and shell elements
Solid and shell elements Theodore Sussman, Ph.D. ADINA R&D, Inc, 2016 1 Overview 2D and 3D solid elements Types of elements Effects of element distortions Incompatible modes elements u/p elements for incompressible
More informationModelling of Wind Turbine Blades with ABAQUS. Senior Scientist March 12, 2015 DTU Risø Campus
Modelling of Wind Turbine Blades with ABAQUS Robert D. Bitsche Composites Seminar, Senior Scientist March 12, 2015 DTU Risø Campus Modelling of Wind Turbine Blades: State of the Art Element types: Layered
More informationA Locking-free Smoothed Finite Element Formulation (Modified Selective FS/NS-FEM-T4) with Tetrahedral Mesh Rezoning for Large Deformation Problems
A Locking-free Smoothed Finite Element Formulation (Modified Selective FS/NS-FEM-T4) with Tetrahedral Mesh Rezoning for Large Deformation Problems Yuki ONISHI, Kenji AMAYA Tokyo Institute of Technology
More informationAppendix A: Mesh Nonlinear Adaptivity. ANSYS Mechanical Introduction to Structural Nonlinearities
Appendix A: Mesh Nonlinear Adaptivity 16.0 Release ANSYS Mechanical Introduction to Structural Nonlinearities 1 2015 ANSYS, Inc. Mesh Nonlinear Adaptivity Introduction to Mesh Nonlinear Adaptivity Understanding
More informationModeling and Simulation for Aircraft Structural Repair Using Modern FEA Tools
Modeling and Simulation for Aircraft Structural Repair Using Modern FEA Tools December 19-22, 2011 and January 9-12, 2012 Kuang-Hua Chang, Ph.D. Williams Presidential Professor School of Aerospace and
More information9 FREE VIBRATION AND EARTHQUAKE ANALYSIS OF A BUILDING
TUTORIAL MANUAL 9 FREE VIBRATION AND EARTHQUAKE ANALYSIS OF A BUILDING This example demonstrates the natural frequency of a long five-storey building when subjected to free vibration and earthquake loading.
More informationANSYS Workbench Guide
ANSYS Workbench Guide Introduction This document serves as a step-by-step guide for conducting a Finite Element Analysis (FEA) using ANSYS Workbench. It will cover the use of the simulation package through
More informationMulti-Step Analysis of a Cantilever Beam
LESSON 4 Multi-Step Analysis of a Cantilever Beam LEGEND 75000. 50000. 25000. 0. -25000. -50000. -75000. 0. 3.50 7.00 10.5 14.0 17.5 21.0 Objectives: Demonstrate multi-step analysis set up in MSC/Advanced_FEA.
More informationTransient Response of a Rocket
Transient Response of a Rocket 100 Force 0 1.0 1.001 3.0 Time Objectives: Develope a finite element model that represents an axial force (thrust) applied to a rocket over time. Perform a linear transient
More informationAbaqus/CAE Axisymmetric Tutorial (Version 2016)
Abaqus/CAE Axisymmetric Tutorial (Version 2016) Problem Description A round bar with tapered diameter has a total load of 1000 N applied to its top face. The bottom of the bar is completely fixed. Determine
More informationFinite Element Course ANSYS Mechanical Tutorial Tutorial 3 Cantilever Beam
Problem Specification Finite Element Course ANSYS Mechanical Tutorial Tutorial 3 Cantilever Beam Consider the beam in the figure below. It is clamped on the left side and has a point force of 8kN acting
More information2D & 3D Semi Coupled Analysis Seepage-Stress-Slope
D & D Semi Coupled Analysis Seepage-Stress-Slope MIDASoft Inc. Angel Francisco Martinez Civil Engineer MIDASoft NY office Integrated Solver Optimized for the next generation 6-bit platform Finite Element
More informationExercise 1. 3-Point Bending Using the Static Structural Module of. Ansys Workbench 14.0
Exercise 1 3-Point Bending Using the Static Structural Module of Contents Ansys Workbench 14.0 Learn how to...1 Given...2 Questions...2 Taking advantage of symmetries...2 A. Getting started...3 A.1 Choose
More informationAbaqus/CAE (ver. 6.10) Stringer Tutorial
Abaqus/CAE (ver. 6.10) Stringer Tutorial Problem Description A table made of steel tubing with a solid steel top and shelf is loaded with an oblique impulse load. Determine the transient response of the
More informationNumerical simulation of tunnel construction in volcanic rocks
Numerical simulation of tunnel construction in volcanic rocks G. Beer, Ch. Duenser Graz University of Technology, Graz, Austria ABSTRACT: For the design of tunnels, numerical simulation plays an important
More informationContents Metal Forming and Machining Processes Review of Stress, Linear Strain and Elastic Stress-Strain Relations 3 Classical Theory of Plasticity
Contents 1 Metal Forming and Machining Processes... 1 1.1 Introduction.. 1 1.2 Metal Forming...... 2 1.2.1 Bulk Metal Forming.... 2 1.2.2 Sheet Metal Forming Processes... 17 1.3 Machining.. 23 1.3.1 Turning......
More informationNon-Linear Finite Element Methods in Solid Mechanics Attilio Frangi, Politecnico di Milano, February 3, 2017, Lesson 1
Non-Linear Finite Element Methods in Solid Mechanics Attilio Frangi, attilio.frangi@polimi.it Politecnico di Milano, February 3, 2017, Lesson 1 1 Politecnico di Milano, February 3, 2017, Lesson 1 2 Outline
More informationLearning Module 8 Shape Optimization
Learning Module 8 Shape Optimization What is a Learning Module? Title Page Guide A Learning Module (LM) is a structured, concise, and self-sufficient learning resource. An LM provides the learner with
More informationLattice. Beginners FLUKA Course
Lattice Beginners FLUKA Course Lattice FLUKA geometry has replication (lattice) capabilities Only one level is implemented (No nested lattices are allowed) In a future release there will be the possibility
More informationCAD - How Computer Can Aid Design?
CAD - How Computer Can Aid Design? Automating Drawing Generation Creating an Accurate 3D Model to Better Represent the Design and Allowing Easy Design Improvements Evaluating How Good is the Design and
More informationLinear and Nonlinear Analysis of a Cantilever Beam
LESSON 1 Linear and Nonlinear Analysis of a Cantilever Beam P L Objectives: Create a beam database to be used for the specified subsequent exercises. Compare small vs. large displacement analysis. Linear
More informationPERFORM-3D Version Copyright Computers and Structures, Inc., 2011 Release Date:
PERFORM-3D Version 5.0.0 Copyright Computers and Structures, Inc., 2011 Release Date: 2011-06-10 Contents 1. Installation Instructions for PERFORM-3D Version 5.0.0 2. New Locations for Some Key Folders
More informationFemap and NX Nastran Best Practices
Femap and NX Nastran Best Practices Technical Seminar for Femap and NX Nastran Users Hosted by: George Laird, Ph.D., P.E., Principal Mechanical Engineer Adrian Jensen, EIT, Senior Staff Engineer FEA, CFD
More informationExercise 12a - Post Processing for Stress/Strain Analysis
Exercise 12a - Post Processing for Stress/Strain Analysis This tutorial will walk through some of the most basic features of HyperView. Note: The model results used for this tutorial had an unrealistic,
More informationModule 1.3W Distributed Loading of a 1D Cantilever Beam
Module 1.3W Distributed Loading of a 1D Cantilever Beam Table of Contents Page Number Problem Description 2 Theory 2 Workbench Analysis System 4 Engineering Data 5 Geometry 6 Model 11 Setup 13 Solution
More informationModule 1.5: Moment Loading of a 2D Cantilever Beam
Module 1.5: Moment Loading of a D Cantilever Beam Table of Contents Page Number Problem Description Theory Geometry 4 Preprocessor 7 Element Type 7 Real Constants and Material Properties 8 Meshing 9 Loads
More informationReduction of Finite Element Models for Explicit Car Crash Simulations
Reduction of Finite Element Models for Explicit Car Crash Simulations K. Flídrová a,b), D. Lenoir a), N. Vasseur b), L. Jézéquel a) a) Laboratory of Tribology and System Dynamics UMR-CNRS 5513, Centrale
More informationVisit the following websites to learn more about this book:
Visit the following websites to learn more about this book: 6 Introduction to Finite Element Simulation Historically, finite element modeling tools were only capable of solving the simplest engineering
More informationFREE VIBRATION AND EARTHQUAKE ANALYSIS OF A BUILDING
8 FREE VIBRATION AND EARTHQUAKE ANALYSIS OF A BUILDING This example demonstrates the natural frequency of a long five-storey building when subjected to free vibration and earthquake loading. The building
More informationTutorial 23: Sloshing in a tank modelled using SPH as an example
Tutorial 23: Sloshing in a tank modelled using SPH as an example This tutorial gives a basic introduction to SPH modelling in Abaqus CAE. The tutorial will take you through a basic model of g forces acting
More informationSimulation of RF HEat Test
Simulation of RF HEat Test Date: Tuesday, December 22, 2015 Designer: Solidworks Study name: Stress One Third Emissivity Analysis type: Nonlinear - Dynamic Description No Data Table of Contents Description...
More informationAccuracy of the Rubicon Toolbox Finite Element Model
Accuracy of the Rubicon Toolbox Finite Element Model Introduction This document deals with the accuracy and recommended use of the Rubicon Toolbox Finite Element module. The document is intended to provide
More informationLocking-Free Smoothed Finite Element Method with Tetrahedral/Triangular Mesh Rezoning in Severely Large Deformation Problems
Locking-Free Smoothed Finite Element Method with Tetrahedral/Triangular Mesh Rezoning in Severely Large Deformation Problems Yuki ONISHI, Kenji AMAYA Tokyo Institute of Technology (Japan) P. 1 P. 1 Motivation
More informationAbaqus CAE Tutorial 1: 2D Plane Truss
ENGI 7706/7934: Finite Element Analysis Abaqus CAE Tutorial 1: 2D Plane Truss Lab TA: Xiaotong Huo EN 3029B xh0381@mun.ca Download link for Abaqus student edition: http://academy.3ds.com/software/simulia/abaqus-student-edition/
More information300 N All lengths in meters. Step load applied at time 0.0.
Problem description In this problem, we subject the beam structure of problem 1 to an impact load as shown. 300 N 0.02 0.02 1 All lengths in meters. Step load applied at time 0.0. E = 2.07 10 11 N/m 2
More informationAbaqus/CAE (ver. 6.11) Nonlinear Buckling Tutorial
Abaqus/CAE (ver. 6.11) Nonlinear Buckling Tutorial Problem Description This is the NAFEMS 1 proposed benchmark (Lee s frame buckling) problem. The applied load is based on the normalized (EI/L 2 ) value
More informationNonLinear Analysis of a Cantilever Beam
NonLinear Analysis of a Cantilever Beam Introduction This tutorial was created using ANSYS 7.0 The purpose of this tutorial is to outline the steps required to do a simple nonlinear analysis of the beam
More informationMSC/PATRAN LAMINATE MODELER COURSE PAT 325 Workbook
MSC/PATRAN LAMINATE MODELER COURSE PAT 325 Workbook P3*V8.0*Z*Z*Z*SM-PAT325-WBK - 1 - - 2 - Table of Contents Page 1 Composite Model of Loaded Flat Plate 2 Failure Criteria for Flat Plate 3 Making Plies
More informationModule 3: Buckling of 1D Simply Supported Beam
Module : Buckling of 1D Simply Supported Beam Table of Contents Page Number Problem Description Theory Geometry 4 Preprocessor 7 Element Type 7 Real Constants and Material Properties 8 Meshing 9 Solution
More informationChecklist for Requirements Specification Reviews
Checklist for Requirements Specification Reviews Organization and Completeness o Are all internal cross-references to other requirements correct? o Are all requirements written at a consistent and appropriate
More informationRecent Developments in LS-DYNA II
9. LS-DYNA Forum, Bamberg 2010 Keynote-Vorträge II Recent Developments in LS-DYNA II J. Hallquist Livermore Software Technology Corporation A - II - 7 Keynote-Vorträge II 9. LS-DYNA Forum, Bamberg 2010
More informationPrescribed Deformations
u Prescribed Deformations Outline 1 Description 2 Finite Element Model 2.1 Geometry Definition 2.2 Properties 2.3 Boundary Conditions 2.3.1 Constraints 2.3.2 Prescribed Deformation 2.4 Loads 2.4.1 Dead
More informationDRY EXCAVATION USING A TIE BACK WALL
3 This example involves the dry construction of an excavation. The excavation is supported by concrete diaphragm walls. The walls are tied back by prestressed ground anchors. Silt Sand 10 m 2 m 20 m 10
More informationOffshore Platform Fluid Structure Interaction (FSI) Simulation
Offshore Platform Fluid Structure Interaction (FSI) Simulation Ali Marzaban, CD-adapco Murthy Lakshmiraju, CD-adapco Nigel Richardson, CD-adapco Mike Henneke, CD-adapco Guangyu Wu, Chevron Pedro M. Vargas,
More information2.7 Cloth Animation. Jacobs University Visualization and Computer Graphics Lab : Advanced Graphics - Chapter 2 123
2.7 Cloth Animation 320491: Advanced Graphics - Chapter 2 123 Example: Cloth draping Image Michael Kass 320491: Advanced Graphics - Chapter 2 124 Cloth using mass-spring model Network of masses and springs
More information1.992, 2.993, 3.04, 10.94, , Introduction to Modeling and Simulation Prof. F.-J. Ulm Spring FE Modeling Example Using ADINA
1.992, 2.993, 3.04, 10.94, 18.996, 22.091 Introduction to Modeling and Simulation Prof. F.-J. Ulm Spring 2002 FE Modeling Example Using ADINA H Hgρ w ργ H = B = 10 m g = 9.81 m/s 2 ρ = 2400 kg/m 3 ρ w
More informationEXAMPLE 1. Static Analysis of Cantilever Column (Fixed-Base Column)
EXAMPLE 1 Static Analysis of Cantilever Column (Fixed-Base Column) Calculate the top displacement, axial force, shear force and bending moment diagrams for the fixed base column described in the figure
More informationSOLIDWORKS Simulation: Material Model Types Defined
SOLIDWORKS Simulation: Material Model Types Defined In SOLIDWORKS Simulation Premium there are 11 material model types which will influence the results of a Linear or Nonlinear Analysis. These models types
More informationIn part 2, we demonstrate the following additional topics:
Problem description In this problem, we analyze a simple beam structure. Each part of this lesson shows the solution of one of the analyses. In part 1, we demonstrate the following topics: Starting up/shutting
More informationABAQUS for CATIA V5 Tutorials
ABAQUS for CATIA V5 Tutorials AFC V2.5 Nader G. Zamani University of Windsor Shuvra Das University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com ABAQUS for CATIA V5,
More informationAbaqus/CAE (ver. 6.9) Vibrations Tutorial
Abaqus/CAE (ver. 6.9) Vibrations Tutorial Problem Description The two dimensional bridge structure, which consists of steel T sections, is simply supported at its lower corners. Determine the first 10
More informationModule 1.6: Distributed Loading of a 2D Cantilever Beam
Module 1.6: Distributed Loading of a 2D Cantilever Beam Table of Contents Page Number Problem Description 2 Theory 2 Geometry 4 Preprocessor 7 Element Type 7 Real Constants and Material Properties 8 Meshing
More informationVERSION 4.3. Introduction to Optimization Module
VERSION 4.3 Introduction to Optimization Module Introduction to the Optimization Module 1998 2012 COMSOL Protected by U.S. Patents 7,519,518; 7,596,474; and 7,623,991. Patents pending. This Documentation
More informationRun-Time Data Structures
Run-Time Data Structures Static Structures For static structures, a fixed address is used throughout execution. This is the oldest and simplest memory organization. In current compilers, it is used for:
More informationTutorial 2: Particles convected with the flow along a curved pipe.
Tutorial 2: Particles convected with the flow along a curved pipe. Part 1: Creating an elbow In part 1 of this tutorial, you will create a model of a 90 elbow featuring a long horizontal inlet and a short
More informationGlobal to Local Model Interface for Deepwater Top Tension Risers
Global to Local Model Interface for Deepwater Top Tension Risers Mateusz Podskarbi Karan Kakar 2H Offshore Inc, Houston, TX Abstract The water depths from which oil and gas are being produced are reaching
More informationModule 1.7W: Point Loading of a 3D Cantilever Beam
Module 1.7W: Point Loading of a 3D Cantilever Beam Table of Contents Page Number Problem Description 2 Theory 2 Workbench Analysis System 4 Engineering Data 5 Geometry 6 Model 11 Setup 13 Solution 14 Results
More informationNormal Modes - Rigid Element Analysis with RBE2 and CONM2
APPENDIX A Normal Modes - Rigid Element Analysis with RBE2 and CONM2 T 1 Z R Y Z X Objectives: Create a geometric representation of a tube. Use the geometry model to define an analysis model comprised
More information