Illumination Units Page 449. Measuring Microscopes Page 452. Microscope Units Page 479. Eyepieces and Objective Lenses Page 482

Transcription

1 Optical Measuring Illumination Units Page 449 Magnifiers Page 40 Measuring Microscopes Page 42 Microscope Units Page 479 Eyepieces and Objective Lenses Page 482 Measuring Projectors Page

2 Cold-light Illuminator Consumable spares Description Lamp 10,8V, 30W, GX,3 for Cold-light Illuminator and Conductors (Swan neck light conductor is optional) Cold-Light Illuminator Light brightness Dimensions Mass Input Output Filter insertion control [mm] [kg] VA 3W Stepless Lateral 168 x 120 x 268 1,3 Swan neck light Conductor Arm diameter Arm length [mm] [mm]

3 Precision Magnifier Series 183 This magnifier is ideal for a variety of measuring tasks. With the Precision Magnifier you can: Easily perform measurements including length, diameter, line thickness and thread pitch. Replace the reticles quickly. Specifications Measuring plate diameter 30 mm Optional accessories Description 9077 Magnifier holder with (without battery) Battery LR (optional illuminator) Pocket Comparators Dimensions Field of View Mass Magnification [mm] [mm] [g] Ø 37 x 48 8X 24, Ø 37 x 4 10X 24, Pocket Comparators Set delivered in a case (including magnifier and reticles) Set compilation , , , , , , , , , , , , , Reticles for Pocket Comparators Description Diameter 0,1; 0,2; 0,3; 0,4; 0,; 0,6; 0,7; 1,; 3 mm Grid 0,3 x 0,4 (Pitch 0,02 ) Radius 0 10 mm (Pitch 0, mm) Angle 0 90 (Pitch 1 ) Scale 0 10 mm (Pitch 0,1 mm) Angle, radius, length, diameter Thickness 0,02 0,16 mm (Pitch 0,01 mm) Angle 0 90 (Reading 0 10 = 1 ; = ) Radius 0 10 mm (Reading 0, mm) Diameter 0,1 1 mm (Reading 0,1 mm) Scale 0 10 mm (Reading 0,1 mm) Grid x 10 mm (Pitch 1 mm) Angle 0 90 (Reading 0 80 = ; = 1 ) Radius 0 10 mm (Reading 0 1 mm = 0,1 mm; 1 10 mm = 0, mm) Scale Grid 10 x 10 mm (Pitch 0, mm) Diameter 0,1; 0,2; 0,3; 0,4; 0,; 0,6; 0,7; 0,8; 0,9: 1; 1,; 2; 2, mm Scale 0 20 mm (Reading 0,1 mm) Angle (Reading 1 ) Radius 0 10 mm (Reading 0, mm) Thread pitches 0,2; 0,3; 0,3; 0,4; 0,4; 0,6; 0,7; 0,9; 10 mm Angle 0 90 (Reading 1 ) Radius 0 0, (Reading 0 0, = 0,00 ) Scale 0 10 mm (Reading 0,1 mm) ISO-Thread pitches 0,2; 0,3; 0,3; 0,4; 0,4; 0,; 0,7; 0,8; 1 mm

4 Pocket Magnifiers Series Slim model These slim model pocket magnifiers are designed to give you maximum stability, secure holding and easy handling Dimensions Field of View Mass Magnification [mm] [mm] [g] ø14, x 12 2X 3,4 17 Series Freestanding model Dimensions Field of View Mass Magnification [mm] [mm] [g] ø31, x 11 2X 3, ø31, x 100 0X 1,6 82 Series 183 Clear Loupe Magnifiers. Transparent draw tube enables clear imaging of the workpiece Reticle (provided with ) Dimensions Field of View Mass Magnification [mm] [mm] [g] ø32 x 43 7X ø32 x 40 10X ø32 x 30 1X ø4 x X zoom

5 Measuring Microscope TM Generation B Series Series 176 With this Toolmaker s Microscope you can measure dimensions and angles on small workpieces thanks to the optional analogue or digital micrometer heads and the built-in circular scale. Further benefits of the TM Generation B include: Toolmakers microscopes well-suited for measuring dimensions and angles of features on small workpieces with the XY stage and rotating eyepiece scale. Compact design with recessed grips for better portability. The slim design makes this microscope ideal for use in areas with limited space. Powerful adjustable LED light sources for contour and surface provide optimum lighting conditions for workpiece inspection. The TM Generation B is available with work stages of 0 x 0 mm or 100 x 0 mm. Rotating eyepiece with angle reading Specifications Observation image Erect Angle reading Range : 360 Minimum reading : 6' (by vernier) Objective lens 2X ( ) Working distance: 67 mm Optional: X, 10X Eyepiece 1X ( ), View field ø13 mm Optional : 10X, 20X Total magnification 30X Transmitted Light source : White LED with green filter Functions: Light intensity adjustable Surface Light source : White LED Functions: Light intensity adjustable Power supply 100/240V AC, 0/60Hz Mass TM-0B: 14 [kg] TM-100B: 1 [kg] Standard accessories Description Eyepiece 1X (field of view ø13 mm) Objective lens 2X Eyepiece reticle cross hairs Optional LED Ring Light TM-0B fitted with optional digimatic micrometer heads 42

6 Measuring Microscope TM Generation B Series Series 176 Dimensions Model TM-0B TM-100B D D XY stage travel range mm 0 x x 0 XY stage table top size 12 x 12 mm 240 x 12 mm Effective area of table 96 x 96 mm 14 x 96 mm Max. workpiece height mm TM-0B TM-100B 43

7 Accessories for Measuring Microscope TM Generation B Series 176 Accessories Objective Lenses and Eyepieces Objective lens Eyepiece 10X Eyepiece 1X Eyepiece 20X (176-11) ( ) ( ) X 100X (1,3 mm) 10X (1,3 mm) 200X (1 mm) X (1) 20X (6, mm) 30X (6, mm) 40X ( mm) X 0X (2,6 mm) 7X (2,6 mm) 100X (2 mm) (1) Standard accessory The number in brackets is the diameter of the field of view 2X objective: X objective: X objective: LED Ring light D Objective Ring light Digimatic micrometer head 0 mm (2 pcs. required): * Stage movement / counter Steel gauge block 2 mm: * Steel gauge block 0 mm: * Dial indicator attachment: Z axis measurement TM-0B TM-100B Analog micrometer heads: * X-axis 2 mm Y-axis 2 mm USB camera: Optical Tube Stage related 10X eyepiece: X eyepiece: X eyepiece: Reticles Swivel centre support, max ø 70 mm: Swivel centre support, max ø 80 mm : Rotary table 66 mm for TM-0B: Rotary table 100 mm for TM-100B: Rotary table 100 mm with fine adjustment for TM-100B: Holder with clamp: V-block with clamp, max ø 2 mm : Optional accessories Description Eyepiece 10X (field of view ø13 mm) Eyepiece 20X (field of view ø10 mm) Objective lens X (W.D : 33 mm, N.A. : 0.10) Objective lens 10X (W.D : 14 mm, N.A. : 0.14) Micrometer head for X-axis 2 mm Micrometer head for Y-axis 2 mm Dial indicator attachment for Z-axis measurement Rotary table 66 mm Swivel centre support Swivel centre support V-block with clamp (Max. workpiece ø2 mm) Holder with clamp Workpiece clip (2 pcs./set) D LED Ring light Digital micrometer head 0 mm Digimatic cable with data switch (1 m) 9910 Digimatic cable with data switch (2 m) 06ADV380C USB Input tool Direct cable with data switch (2 m) 02AZD790C U-WAVE Data Cable with data switch 12AAE044 Ring adapter for TM Steel Individual Metric Gauge Block 2 mm Grade Steel Individual Metric Gauge Block 0 mm Grade Rotary table 100 mm Rotary table 100 mm with fine adjustment : for stage 0 x 0 mm and : for stage 100 x 0 mm Steel gauge block 7 mm: * Digimatic data cable: (1m) or 9910 (2m) (X-axis: 1pcs. / Y-axis: 1pcs.) DMX-2S interface, 2 channel: RS232C data cable 0,2 m: QM-Data 200 data processor Stand type: 264-1D Standard accessory Necessary option either chose *1 or *2 * Necessary gauge blocks for extending stage travel range: Stage travel range TM with analog micrometer heads 0-2 mm Range 2-0 mm X-axis: Y-axis: Range 2-7 mm X-axis: TM with digimatic micrometer heads 0-0 mm Range mm X-axis: Range mm X-axis:

8 Accessories for Measuring Microscope TM Generation B Series Reticles Remarks Metric screw threads (pitch = 0,2-1 mm) Metric screw threads (pitch = 1,2-2 mm) Concentric circle (up to ø 4 mm, 0,0 mm increment) involute gear teeth (normal rack type) angle Unified screw threads (80-28TPI) Unified screw threads (24-14TPI) Unified screw threads (13-10TPI) Cross-hair (standard accessory) ISO metric screw threads (0,07-0,7 mm) ISO metric screw threads (0,7-2 mm)

9 Measuring Microscope MF Generation D Series Series 176 MF Generation D Series: Manual models This versatile measuring microscope, whether you use it to boost the performance with Mitutoyo s vision unit, for data management on a PC or other applications, offers you further improved measuring efficiency. The MF offers you the following benefits: Measuring accuracy that is one of the highest in its class. Proven high-na objectives from the ML optical series (long working distance type). Integration of metallurgical and measurement microscope functions enabling you to make high-resolution observations and high-accuracy measurements. Illumination unit (reflected/transmitted) gives you the option of a high-intensity LED or halogen bulb. The variable aperture diaphragm (reflected/ transmitted) allows observation measurement while suppressing light diffraction. Variety of standardized stages in sizes up to mm. Quick-release mechanism enabling you to move the stage quickly when measuring large or numerous workpieces. High-magnification eyepiece observation up to 2000X. A good choice of optional accessories, including a Vision Unit, various digital CCD cameras or data management on a PC, promises a wide field of application and excellent measuring efficiency. Using optional slide type nosepiece with 2-lens mount (factory-fit option) Specifications Observation image Optical tube Eyepiece Objective lens Transmitted Surface Display unit Indication accuracy (at 20 C) Floating function Power supply Erect image Monocular or binocular tube (depression: 2"), Reticle projection method, with TV mount, Optical path ratio (eyepiece/tv mount: 0/0) 10X, 1X, 20X Standard: 3X Optional: 1X, X, 10X, 20X, 0X, 100X Optical system: Telecentric with adjustable aperture diaphragm Functions: Light intensity adjustable, non-stepped brightness adjustment Optical system: Koehler with adjustable aperture diaphragm Functions: Light intensity adjustable, non-stepped brightness adjustment of axes: 2 (MF-A type) or 3 (MF- B type) Resolution: 0,001 mm/0,000 mm/ 0,0001 mm Functions: Zero-setting, Direction switching, Data output (USB and RS-232C interface) XY-axis: (2,2+0,02L) μm Z-axis: (+0,04L) μm L: Measuring length (mm) when not loaded, JIS B 713 X and Y axes with Quick-release mechanism 100/110/120/220/240 VAC, 0/60Hz Reticle mounts (standard accessories) Optional monocular MF-B2017D 1010D 100x100 mm 2010D 200x100 mm Optional binocular 3017D 300x170 mm 4020D 400x200 mm Refer to the MF / MF-U microscopes brochure 46

10 Measuring Microscope MF Generation D Series Optional accessories Description 12AAA16 Lens cleaning set X camera adapter (with C-mount adapter) 12BAB34 Halogen bulb (24V/0W) Vibration damping stand Stage micrometer 12AAA846 Foot switch 264-1D QM-Data 200 Stand type Eyepieces Monocular tube with 10X eyepiece Binocular tube with 10X eyepiece set Protractor eyepiece (10X) D Digital protractor eyepiece (10X) X eyepiece set (ø24 mm) X eyepiece set (ø16 mm) X eyepiece set (ø12 mm) Filters 12AAA643 ND2 colour filter 12AAA644 ND8 colour filter 12AAA64 GIF filter (transmitted / surface) 12AAA646 LB80 colour filter (transmitted / surface) Mounts C-mount adapter Slide type nosepiece (2-mount / parfocal) factory-fit option Slide type nosepiece (2-mount / mag. adjusted) factory-fit option Objective Lenses X lens (WD : 61 mm, NA : 0.03) X lens (WD : 77 mm, NA : 0.09) X lens (WD : 61 mm, NA : 0.13) X lens (WD : 1 mm, NA : 0.21) X lens (WD : 20 mm, NA : 0.42) X lens (WD : 13 mm, NA : 0.) X lens (WD : 6 mm, NA : 0.7) Series 176 Specifications/Dimensions Model 1010D 2010D 2017D 3017D 4020D Swiveling function (left) MF-A (2 axis) MF-B (3 axis) XY stage travel range mm 100 x x x x x 200 Z-axis travel range mm XY stage top size mm 280 x x x x x 342 Effective glass size mm 180 x x x x x 240 Swivelling function - - ± (left) ± (left) ±3 (left) Max. stage loading kg Max. workpiece height mm Mass kg 6, 69, D 4020D Focus pilot FP-0 Focus assisting system QM-Data 200 Vision Unit PC-based vision measuring system 47

11 Measuring Microscope MF Generation D Series Series 176 MF Generation D Series: Models with motorized Z-axis movement The MF Generation D version with a motorized Z-axis. This feature renders fast and accurate Auto Focus possible when used in combination with the optional Vision Unit. The MF with motorized Z- axis is available in 3 stage sizes and incorporates all the functionality of the standard MF Generation D series. The MF Generation D with motorized Z-axis offers the following benefits: Auto Focus function when using the optional Vision Unit. A measuring accuracy that is one of the highest in its class. Proven high-na objectives (long working distance type). Integration of metallurgical and measurement microscope functions enabling you to make high-resolution observations and high-accuracy measurements. Illumination unit (reflected/transmitted) offers the option of a high-intensity LED or halogen bulb. The variable aperture diaphragm (reflected/ transmitted) allows observation measurement while suppressing light diffraction. Variety of 3 standardized stages in sizes up to mm. Quick-release mechanism enabling you to move the stage quickly when measuring large or numerous workpieces. High-magnification eyepiece observation up to 2000X. A large lineup of optional accessories, including a Vision Unit, various digital CCD cameras and data management for a PC, grants a wide field of applications and excellent measuring efficiency. Screen image before and after Auto Focus* * When using optional Vision Unit Specifications Observation image Optical tube Eyepiece Objective lens Transmitted Surface Erect image Monocular or binocular tube (depression: 2"), Reticle projection method, with TV mount, Optical path ratio (eyepiece/tv mount: 0/0) 10X, 1X, 20X Standard: 3X Optional: 1X, X, 10X, 20X, 0X, 100X Optical system: Telecentric with adjustable aperture diaphragm Functions: Light intensity adjustable, non-stepped brightness adjustment Optical system: Koehler with adjustable aperture diaphragm Functions: Light intensity adjustable, non-stepped brightness adjustment Display unit of axes: 3 Resolution: 0,001 mm/0,000 mm/ 0,0001 mm Functions: Zero-setting, Direction switching, Data output (USB and RS-232C interface) Indication accuracy (at 20 C) Floating function Power supply Remote Box XY-axis: (2,2+0,02L) μm Z-axis: (+0,04L) μm L: Measuring length (mm) when not loaded, JIS B 713 X and Y axes with Quick-release mechanism 100/110/120/220/240 VAC, 0/60Hz - Speed adjustment - Coarse/Fine Speed switching - Jog shuttle - Emergency stop switch - AF button - Counter reset button - Data output button - Power switch - Limit setting (Z-axis) Remote Box Refer to the MF / MF-U microscopes brochure MF-J2017D 48

12 Measuring Microscope MF Generation D Series Optional accessories Description 12AAA16 Lens cleaning set X camera adapter (with C-mount adapter) 12BAB34 Halogen bulb (24V/0W) Vibration damping stand Stage micrometer 12AAA846 Foot switch 264-1D QM-Data 200 Stand type Eyepieces Monocular tube with 10X eyepiece Binocular tube with 10X eyepiece set Protractor eyepiece (10X) D Digital protractor eyepiece (10X) X eyepiece set (ø24 mm) X eyepiece set (ø16 mm) X eyepiece set (ø12 mm) Filters 12AAA643 ND2 colour filter 12AAA644 ND8 colour filter 12AAA64 GIF filter (transmitted / surface) 12AAA646 LB80 colour filter (transmitted / surface) Mounts C-mount adapter Slide type nosepiece (2-mount / parfocal) factory-fit option Slide type nosepiece (2-mount / mag. adjusted) factory-fit option Objective Lenses X lens (WD : 61 mm, NA : 0.03) X lens (WD : 77 mm, NA : 0.09) X lens (WD : 61 mm, NA : 0.13) X lens (WD : 1 mm, NA : 0.21) X lens (WD : 20 mm, NA : 0.42) X lens (WD : 13 mm, NA : 0.) X lens (WD : 6 mm, NA : 0.7) Series 176 Specifications/Dimensions MF Generation D: Models with motorized Z-axis movement Model MF-J2017D MF-J3017D MF-J4020D D D D XY stage travel range mm 200 x x x 200 Z-axis travel range mm XY stage top size mm 410 x x x 342 Effective glass size mm 270 x x x 240 Swivelling function ± (left) ± (left) ±3 (left) Max. stage loading kg Focus pilot FP-0 Focus assisting system QM-Data 200 Vision Unit PC-based vision measuring system 49

13 Measuring Microscope MF Generation D Series Series 176 MF Generation D Series: Motor driven models All the functionality of the manual MF Generation D Series enhanced with motor driven axis in X, Y and Z offers the best you can expect of a measuring microscope when efficiency and operability is concerned. The MF-D Series offers you the following benefits: Motor driven axis enabling you to move the stage quickly and without fatigue, ideal for measuring large or numerous workpieces. ML series, high NA objective lenses with long working distance. Focussing made easy when using the optional Vision Unit. Measuring accuracy that is one of the highest in its class. Illumination unit (reflected/transmitted) gives you the option of a high-intensity LED or halogen bulb. The variable aperture diaphragm (reflected/ transmitted) allows observation measurement while suppressing light diffraction. Variety of standardized stages in sizes up to mm. High-magnification eyepiece observation up to 2000X. A good choice of optional accessories, including a Vision Unit, digital CCD cameras or data management on a PC, promises a wide field of application and excellent measuring efficiency. Specifications Resolution (switchable) Observation image Optical tube Eyepiece Transmitted Surface 0,0001mm/0,000mm/0,001mm Erect image Monocular or binocular tube (depression: 2"), Reticle projection method, with TV mount, Optical path ratio (eyepiece/tv mount: 0/0) 10X, 1X, 20X Optical system: Telecentric with adjustable aperture diaphragm Functions: Light intensity adjustable, non-stepped brightness adjustment Optical system: Koehler with adjustable aperture diaphragm Optional monocular Optional binocular MF-UJ 2017D MF Generation D: Motor driven models Model MF-G2017D MF-G3017D MF-G4020D D D D XY stage travel range mm 200 x x x 200 Effective glass size mm 270 x x x 240 Swiveling function (left) ± ± ± 3 Z-axis travel range mm XY stage top size mm 410 x x x 342 Max. stage loading kg Refer to the MF/MF-U microscopes brochure 460

14 Accessories for Measuring Microscope MF Generation D Optional accessories Description Rotary table with fine feed wheel ø183 mm Rotary table with fine feed wheel ø240 mm Holder with clamp Swivel centre support V-block with clamp (Max. workpiece ø2 mm) Rotary table 100 mm with fine adjustment 12AAA807D RS-232C cable (2m) 12AAG806 GIF filter 12AAG807 LB80 filter Eyepieces X eyepiece (2 pcs.) X eyepiece set (ø24 mm) Lighting D Twin fibre-optic illuminator D LED Ring Light D LED Ring light Oblique surface unit Lighting (required option) D LED unit D Halogen unit Reticles 12AAG838 Cross-hair reticle (7 μm width) 12AAG846 Reticle 10x10 mm section 12AAG847 Reticle metric screw thread (P=0,2-1,0) 12AAG848 Reticle metric screw thread (P=1,2-2,0) 12AAG849 Reticle involute gear tooth (14. ) 12AAG80 Reticle involute gear tooth (20 ), module = AAG81 Reticle unified screw thread (80-28TPI) 12AAG82 Reticle unified screw thread (24-14TPI) 12AAG83 Reticle unified screw thread (13-10TPI) 12AAG836 Cross-hair reticle ( μm width) 12AAG873 Cross-hair reticle (3 μm width) 12AAG840 Broken cross-hair reticle and 60 angle 12AAG841 Zeiss type chart reticle 12AAG842 Reticle 20 mm scale 12AAG843 Reticle concentric circle (ø1.2 - ø18 mm) 12AAG844 Reticle 10 mm scale 12AAG839 Broken cross-hair and 4 angle 12AAG84 Reticle mm scale Series 176 Accessories/system diagram system for MF manual and motorized Z-axis models C-mount Monocular unit (with one 10X eyepiece) Binocular unit (with two 10X eyepieces) X eyepiece (two)/ (one) 1X eyepiece (two)/ (one) 20X eyepiece (two)/ (one) 10X protractor eyepiece X digital protractor eyepiece Reticles 12AAA64 12AAA646 12AAA643 12AAA size Holder with clamp V-block with clamp Swivel center support X TV adapter unit TV observation/ image saving Optical tube 2010 size 2017/3017/4020 size Stage adapter B Holder with clamp V-block with clamp Swivel center support Focus pilot FP-0 (LED type) (Green)/37-08 (Red) RS-232C (crossing) cable 12AAA807 Note: D-sub 9-pin female-female cable Data calculation processing Display data transfer Display data printing Main unit Manual models Models with motorized Z-axis Stage-related Focus detection MF D wheel (with scale) Standard accessory Required for main unit Power focusing Control unit Remote box (only models with motorized Z-axis) Objective Stage adapter Holder with clamp * V-block with clamp * Swivel center support *Usable with stage adapter ( ) Vision Unit 10D (shipped with main unit) QM-Data LED unit Halogen unit (100W) (100W) Note: Applicable only for 10X or lower LED ring illuminator (white) (external brightness adjuster) Note: Applicable only for 10X or lower Slide type nosepiece (factory installed option) Slide type nosepiece (factory installed option) Digital rotary head (for ø 20) Foot switch (highly rigid type) 12AAJ088 Vision AF cable: 12AAN38 (only models with motorized Z-axis) Calibration chart 02AKN020 Real-time process control program MeasurLink Thermal printer DPU414: 12AAD032 (with connection cable) FD unit: 12AAA799 Foot switch (highly rigid type): 12AAJ088 External printer (ESC/P) Cable: 12AAA804 RS-232C (crossing) cable 12AAA807 Note: D-sub 9-pin female-female cable 12AAG806 12AAG807 External light source control cable 12AAD128 External light source control cable 12AAG888 1X ML objective X ML objective X ML objective X ML objective X ML objective X ML objective X ML objective Vibration damping stand Stage micrometer

15 Accessories for Measuring Microscope MF Generation D Series 176 Accessories/system diagram for MF motor driven models Main unit (reflected + transmitted) Main unit Filters for main unit transmitted GIF filter 12AAA64 LB80 filter 12AAA646 LED unit Halogen unit * *1 Monocular unit (with one 10X eyepiece) Binocular unit (with two 10X eyepieces) ND2 filter 12AAA643 ND8 filter 12AAA644 Focus detection Focus Pilot *1 (green)/37-08 *1 (red) Data calculation processing RS232C (crossing) cable 12AAA807 Note: D-sub 9-pin female-female cable QM-Data200 QM-Data *1 Vision unit Vision unit 10D QSPAK VUE PC is required. Thermal printer DPU-414 *1 (with connecting cable) Foot switch (high rigidity type): 12AAJ088 Vision AF cable 12AAN38 Foot switch (highly rigid type) 12AAJ088 Calibration chart 02AKN020 Calibration chart (with holder) 02ATN69 Optical tube 10X eyepiece (two)/ (one) 1X eyepiece (two)/ (one) Control unit Remote box Control unit Remote box 20X eyepiece (two)/ (one) 10X protractor eyepiece *1 10X digital protractor eyepiece Various rectiles Peripheral device for stage Rotary table with fine feed wheel (B) MF D Motorized Stage adapter External reflected Twin fiber optics illuminator (100W) *1 Ring fiber optics illuminator (100W) *1 LED ring illuminator (white) *1 (external brightness adjuster) 100W External filter GIF filter (for light source) 12AAG806 LB80 filter (for light source) 12AAG807 External light source control cable 12AAD128 External light source control cable 12AAG888 Connection to a Vision unit Holder with cramp V-block with cramp Swivel center support Objective Slide type nosepiece (factory installed option) (factory installed option) 100W External filter 3X ML objective Various ML objectives Printing of counter data Data management Optional peripheral device Thermal printer DPU414 *1 (with connecting cable) Foot switch (highly rigid type) 12AAJ088 Real-time process control MeasurLink Inspection table creation program MeasureReport Note: A PC is required. RS232C (crossing) cable 12AAA807 Vibration damping stand Mounting stand (microscope + QM-Data 200) Lens cleaning set 12AAA16 *1 Order depends on the destination. Stage micrometer Vertical system rack (for Vision Unit)

16 Measuring Microscope MF-U Generation D Series Specifications Observation image Optical tube Indication accuracy (at 20 C) Floating function Focusing method Power supply Eyepiece lens Turret (optional) Objective lens (optional) Transmitted optional Surface optional Erect image Siedentoph type (pupil distance adjustment : 1-76 mm), 1X tube lens, Binocular tube (depression : 30 ), Reticle projection method, with TV mount, Optical path ratio (eyepiece/tv mount : 0/0) XY-axis : (2,2+0,02L) μm Z-axis : (+0,04L) μm L : Measuring length (mm) when not loaded, JIS B 713 X and Y axes with Quick-release mechanism Manual (coarse focusing : 10 mm/ rev., fine focusing : 0,1 mm/rev.) 220/240V AC, 0/60Hz 10X (field : 24 mm) Optional : 1X, 20X Manual or motorized M / BD Plan Apo objective from 1X to 100X Light source : Halogen bulb (12V, 0W) Optical system : Telecentric with adjustable aperture diaphragms Functions : Light intensity adjustable, Non-stepped brightness adjustment Light source : Optional halogen unit (fiber-optic cold light ) Optical system : Koehler with adjustable aperture diaphragms Functions : Light intensity adjustable, Non-stepped brightness adjustment Display unit Resolution: 0,001mm / 0,000mm / 0,0001mm of axis : 2 axis or 3 axis Functions : Zero-setting, Direction switching, Data output (USB and RS-232C interface) Series 176 MF-U Generation D Series: Manual models This high-power multi-function measuring microscope gives you detailed observation with a clear and flare-less erect image and a wide field of view. The MF-U offers you the following benefits: Measuring accuracy that is one of the highest in its class. Proven high-na objectives from the FS optical system (long working distance type). Integration of metallurgical and measurement microscope functions enabling you to make high-resolution observations and high-accuracy measurements. Illumination unit (reflected/transmitted) gives you the option of a high-intensity LED or halogen bulb. The variable aperture diaphragm (reflected/ transmitted) allows observation measurement while suppressing light diffraction. Variety of standardized stages in sizes up to mm. Quick-release mechanism enabling you to move the stage quickly when measuring large or numerous workpieces. High-magnification eyepiece observation up to 2000X. A good choice of optional accessories, including a Vision Unit, various digital CCD cameras or data management on a PC, promises a wide field of application and excellent measuring efficiency. MF-UB 3017D (turret, objectives and are optional) Polarized light Differential interference contrast Optional positions motorized turret Dark field Bright field 1010D Refer to the MF / MF-U microscopes brochure 4020D 463

17 Measuring Microscope MF-U Generation D Series Series High-power Multi-function Model 1010D Model 2010D Model 1010D XY stage travel range : 100 x 100 mm Z-axis travel range : 10 mm XY stage top size : 280 x 280 mm Effective glass size : 180 x 180 mm Max. stage loading : 10 kg Max. workpiece height : 10 mm Mass : 6, kg Model MF-UA1010D MF-UB1010D MF-UC1010D MF-UD1010D X, Y and Z axis (3 Measurement system X and Y axis (2 axes) X and Y axis (2 axes) X, Y and Z axis (3 axes) axes) Observation type Bright Field (BF) Bright Field (BF) Bright/Dark Field (BF/DF) Bright/Dark Field (BF/DF) Model 2010D XY stage travel range : 200 x 100 mm Z-axis travel range : 10 mm XY stage top size : 30 x 280 mm Effective glass size : 20 x 10 mm Max. stage loading : 10 kg Max. workpiece height : 10 mm Mass : 69, kg Model MF-UA2010D MF-UB2010D MF-UC2010D MF-UD2010D X, Y and Z axis (3 Measurement system X and Y axis (2 axes) X and Y axis (2 axes) X, Y and Z axis (3 axes) axes) Observation type Bright Field (BF) Bright Field (BF) Bright/Dark Field (BF/DF) Bright/Dark Field (BF/DF) Optional accessories Description X camera adapter (with C-mount adapter) C-mount adapter Stage micrometer 12AAA16 Lens cleaning set 12AAA846 Foot switch V-block with clamp (Max. workpiece ø2 mm) Rotary table with fine feed wheel ø183 mm Rotary table with fine feed wheel ø240 mm 264-1D QM-Data 200 Stand type Bulbs 12BAB34 Halogen bulb (24V/0W) Halogen bulb (24V, 100W) 12BAD602 High intensity bulb (24V/100W) DIC Units DIC unit for 100X, SL80X, SL0X objective DIC unit for 0X, SL20X objective DIC unit for 20X objective DIC unit for 10X, X objective Eyepieces X eyepiece X eyepiece Filters 12AAA643 ND2 colour filter 12AAA644 ND8 colour filter 12AAA64 GIF filter (transmitted / surface) 12AAA646 LB80 colour filter (transmitted / surface) 12AAG806 GIF filter 12AAG807 LB80 filter Lighting (required option) D Twin fibre-optic illuminator D Halogen unit (12V, 100W) D Halogen unit (12V, 10W) D Halogen unit Reticles 12AAG876 Cross-hair reticle (3 μm width) 12AAG877 Cross-hair reticle ( μm width) 12AAG878 Cross-hair reticle (7 μm width) 12AAG879 Cross-hair and 4 angle 12AAG880 Broken cross-hair and 60 angle 12AAG881 Zeiss type chart Stands Vibration damping stand Holder with clamp Swivel centre support Turrets (required option) Manual turret BF 4 mounts D Power turret BF mounts Manual turret BF/DF 4 mounts D Power turret BF/DF 4 mounts 464

18 Measuring Microscope MF-U Generation D Series Series 176 Model 2017D Model 3017D Model 4020D Model 2017D XY stage travel range : 200 x 170 mm Z-axis travel range : 220 mm XY stage top size : 410 x 342 mm Effective glass size : 270 x 240 mm Swivelling function (left) : ± Max. stage loading : 20 kg Max. workpiece height : 220 mm Mass : 130 kg Model MF-UA2017D MF-UB2017D MF-UC2017D MF-UD2017D X, Y and Z axis (3 Measurement system X and Y axis (2 axes) X and Y axis (2 axes) X, Y and Z axis (3 axes) axes) Observation type Bright Field (BF) Bright Field (BF) Bright/Dark Field (BF/DF) Bright/Dark Field (BF/DF) Model 3017D XY stage travel range : 300 x 170 mm Z-axis travel range : 220 mm XY stage top size : 10 x 342 mm Effective glass size : 370 x 240 mm Swivelling function (left) : ± Max. stage loading : 20 kg Max. workpiece height : 220 mm Mass : 138 kg Model MF-UA3017D MF-UB3017D MF-UC3017D MF-UD3017D X, Y and Z axis (3 Measurement system X and Y axis (2 axes) X and Y axis (2axes) X, Y and Z axis (3 axes) axes) Observation type Bright Field (BF) Bright Field (BF) Bright/Dark Field (BF/DF) Bright/Dark Field (BF/DF) Model 4020D XY stage travel range : 400 x 200 mm Z-axis travel range : 220 mm XY stage top size : 610 x 342 mm Effective glass size : 440 x 240 mm Swivelling function (left) : ±3 Max. stage loading : 1 kg Max. workpiece height : 220 mm Mass : 144 kg Model MF-UA4020D MF-UB4020D MF-UC4020D MF-UD4020D X, Y and Z axis (3 Measurement system X and Y axis (2 axes) X and Y axis (2 axes) X, Y and Z axis (3 axes) axes) Observation type Bright Field (BF) Bright Field (BF) Bright/Dark Field (BF/DF) Bright/Dark Field (BF/DF) 46

19 Measuring Microscope MF-U Generation D Series Series 176 MF-U Generation D Series: Models with motorized Z-axis movement The MF-U Generation D version with a motorized Z-Axis. This feature renders fast and accurate Auto Focus possible when used in combination with the optional Vision Unit. The MF-U with motorized Z-axis is available in 3 stage sizes and incorporates all the functionality of the standard MF- U Generation D series. The MF-U Generation D with motorized Z-axis offers you the following benefits: Auto Focus function when using the optional Vision Unit. A measuring accuracy that is one of the highest in its class. Proven high-na objectives from the FS optical system (long working distance type). Integration of metallurgical and measurement microscope functions enabling you to make high-resolution observations and high-accuracy measurements. Illumination unit (reflected/transmitted) gives you the option of a high-intensity LED or halogen bulb. The variable aperture diaphragm (reflected/ transmitted) allows observation measurement while suppressing light diffraction. Variety of 3 standardized stages in sizes up to mm. Quick-release mechanism enabling you to move the stage quickly when measuring large or numerous workpieces. High-magnification eyepiece observation up to 2000X. A large lineup of optional accessories - including a Vision Unit, various digital CCD cameras or data management on a PC - grants a wide field of application and excellent measuring efficiency. MF-UB 3017D (turret, objectives and are optional) Screen image before and after Auto Focus* * When using optional Vision Unit Specifications Observation image Optical tube Indication accuracy (at 20 C) Floating function Focusing method Power supply Eyepiece lens Turret (optional) Objective lens (optional) Transmitted optional Erect image Siedentoph type (pupil distance adjustment : 1-76 mm), 1X tube lens, Binocular tube (depression : 30 ), Reticle projection method, with TV mount, Optical path ratio (eyepiece/tv mount : 0/0) XY-axis : (2,2+0,02L) μm Z-axis : (+0,04L) μm L : Measuring length (mm) when not loaded, JIS B 713 X and Y axes with Quick-release mechanism Manual (coarse focusing : 10 mm/ rev., fine focusing : 0,1 mm/rev.) 220/240V AC, 0/60Hz 10X (field : 24 mm) Optional : 1X, 20X Manual or motorized M / BD Plan Apo objective from 1X to 100X Light source : Halogen bulb (12V, 0W) Optical system : Telecentric with adjustable aperture diaphragms Functions : Light intensity adjustable, Non-stepped brightness adjustment Surface Light source : Optional halogen unit (fiber-optic cold optional light ) Optical system : Koehler with adjustable aperture diaphragms Functions : Light intensity adjustable, Non-stepped brightness adjustment Display unit Resolution: 0,001mm / 0,000mm / 0,0001mm of axis : 2 axis or 3 axis Functions : Zero-setting, Direction switching, Data output (USB and RS-232C interface) Remote Box - Speed adjustment - Coarse/Fine Speed switching - Jog shuttle - Emergency stop switch - AF button - Counter reset button - Data output button - Power switch - Limit setting (Z-axis) Remote Box Refer to the MF / MF-U microscopes brochure 466

20 Measuring Microscope MF-U Generation D Series Optional accessories Description X camera adapter (with C-mount adapter) C-mount adapter Stage micrometer 12AAA16 Lens cleaning set 12AAA846 Foot switch V-block with clamp (Max. workpiece ø2 mm) Rotary table with fine feed wheel ø183 mm Rotary table with fine feed wheel ø240 mm 264-1D QM-Data 200 Stand type Bulbs 12BAB34 Halogen bulb (24V/0W) Halogen bulb (24V, 100W) 12BAD602 High intensity bulb (24V/100W) DIC Units DIC unit for 100X, SL80X, SL0X objective DIC unit for 0X, SL20X objective DIC unit for 20X objective DIC unit for 10X, X objective Eyepieces X eyepiece X eyepiece Filters 12AAA643 ND2 colour filter 12AAA644 ND8 colour filter 12AAA64 GIF filter (transmitted / surface) 12AAA646 LB80 colour filter (transmitted / surface) 12AAG806 GIF filter 12AAG807 LB80 filter Lighting (required option) D Twin fibre-optic illuminator D Halogen unit (12V, 100W) D Halogen unit (12V, 10W) D Halogen unit Reticles 12AAG876 Cross-hair reticle (3 μm width) 12AAG877 Cross-hair reticle ( μm width) 12AAG878 Cross-hair reticle (7 μm width) 12AAG879 Cross-hair and 4 angle 12AAG880 Broken cross-hair and 60 angle 12AAG881 Zeiss type chart Stands Vibration damping stand Holder with clamp Swivel centre support Turrets (required option) Manual turret BF 4 mounts D Power turret BF mounts Manual turret BF/DF 4 mounts D Power turret BF/DF 4 mounts Series 176 MF-U Generation D: Models with motorized Z-axis 1. Bright Field Observation Model MF-UJ2017D MF-UJ3017D MF-UJ4020D D D D XY stage travel range mm 200 x x x 200 Effective glass size mm 270 x x x 240 Swiveling function (left) ± (left) ± (left) ±3 (left) Z-axis travel range mm XY stage top size mm 410 x x x 342 Max. stage loading kg Bright Field/ Dark Field Observation Model MF-UK2017D MF-UK3017D MF-UK4020D D D D XY stage travel range mm 200 x x x 200 Effective glass size mm 270 x x x 240 Swiveling function (left) ± (left) ± (left) ±3 (left) Z-axis travel range mm XY stage top size mm 410 x x x 342 Max. stage loading kg

21 Measuring Microscope MF-U Generation D Series Series 176 MF-U Generation D Series: Motor driven models All the functionality of the manual MF-U Generation D Series enhanced with motor driven axes in X, Y and Z offers the best you can expect of a measuring microscope when efficiency and operability is concerned. The MF-U Generation D Series offers you the following benefits: Motor driven axis enabling you to move the stage quickly and without fatigue, ideal for measuring large or numerous workpieces. Proven high NA objective lenses from the FS optical system (long working distance type). Focussing made easy when using the optional Vision Unit. Models with Laser Auto Focus have by standard tracking focus functionality. Measuring accuracy that is one of the highest in its class. Illumination unit (reflected/transmitted) gives you the option of a high-intensity LED or halogen bulb. The variable aperture diaphragm (reflected/ transmitted) allows observation measurement while suppressing light diffraction. Variety of standardized stages in sizes up to mm. High-magnification eyepiece observation up to 2000X. A good choice of optional accessories, including a Vision Unit, digital CCD cameras or data management on a PC, promises a wide field of application and excellent measuring efficiency. Specifications Observation image Erect image Refer to the MF / MF-U microscopes brochure MF-UG4020D MF-UE2017D with LAF 1) MF-U Generation D Bright Field Observation Model MF-UG2017D MF-UG3017D MF-UG4020D D D D XY stage travel range mm 200 x x x 200 Effective glass size mm 270 x x x 240 Swiveling function (left) ± ± ± 3 Z-axis travel range mm XY stage top size mm 410 x x x 342 Max. stage loading kg ) MF-U Generation D Bright Field/Dark Field Observation Model MF-UH2017D MF-UH3017D MF-UH4020D D D D XY stage travel range mm 200 x x x200 Effective glass size mm 270 x x x 240 Swiveling function (left) ± ± ± 3 Z-axis travel range mm XY stage top size mm 410 x x x 342 Max. stage loading kg

22 Measuring Microscope MF-U Generation D Series 3) MF-U Generation D with Laser Auto Focus Bright Field Observation Model MF-UE2017D MF-UE3017D MF-UE4020D D D D XY stage travel range mm 200 x x x 200 Effective glass size mm 270 x x x 240 Swiveling function (left) ± ± ± 3 Z-axis travel range mm XY stage top size mm 410 x x x 342 Max. stage loading kg ) MF-U Generation D with Laser Auto Focus Bright Field/Dark Field Observation Model MF-UF2017D MF-UF3017D MF-UF4020D D D D XY stage travel range mm 200 x x x 200 Effective glass size mm 270 x x x 240 Swiveling function (left) ± ± ± 3 Z-axis travel range mm XY stage top size mm 410 x x x 342 Max. stage loading kg Optional turrets (Necessary option for MF-UD) QM-Data 200 Vision Unit 10D 469

23 Accessories for Measuring Microscope MF-U Generation D C-mount X eyepiece (two) 1X eyepiece (two) 20X eyepiece (two) DIC unit : for X and 10X : for 20X : for 0X and SL20X : for 100X, SL0X, and SL80X Polarization unit (BF/BD) size Reticles GIF lter 12AAA64 LB80 lter 12AAA646 ND2 lter 12AAA643 ND8 lter 12AAA644 Control unit Remote box (only models with motorized Z-axis) Holder with clamp V-block with clamp Swivel center support Vibration damping stand wheel (with scale) X TV adapter unit Holder with clamp V-block with clamp Swivel center support TV observation/ image saving Focus detection *Usable with stage adapter ( ) Focus pilot FP-0U (green)*/ (red) *factory installed option RS232C (crossing) cable 12AAA807 1 Note: D-sub 9-pin female-female cable Data calculation processing Counter data transfer Counter data printing Main unit halogen T 2010 size 2017/3017/4020 size Stage adapter B Optical tube MF-U D Manual models Models with motorized Z-axis Main unit transmitted Power focusing Stage-related Stage adapter Turret/objective BD Manual BD revolver ( -hole) Power BF revolver ( -hole) Holder with clamp * V-block with clamp * Swivel center support * Stage micrometer Main unit LED BF Digital rotary head (for ø 20) Halogen lamp 12V 0W (transmitted) Long life type halogen lamp 12V 0W (transmitted) 12BAB34 Vision Unit 10D (main unit) QM-Data LED unit Fiber optics illuminator (100W) Fiber optics illuminator (10W) Halogen unit T D FS objective conversion adapter FS objective BD plan po series FS objective BD plan po SL series FS objective BD plan po HR series Standard accessory Required Foot switch 12AAJ088 Calibration chart 02AKN020 12AAN38 (only models with motorized Z-axis) Real-time process control program MeasurLink Thermal printer DPU414: 12AAD032 (with connection cable) FD unit: 12AAA799 Foot switch: 12AAJ088 External printer (ESC/P) Cable: 12AAA804 RS232C (crossing) cable 12AAA807 Note: D-sub 9-pin female-female cable GIF lter (for light source) 12AAG806 LB80 lter (for light source) 12AAG807 External light source control cable 12AAG888 External light source control cable 12AAD128 LED ring light for FS objective Note: Applicable only for 10X or lower FS objective M plan po series FS objective M plan po SL series FS objective M plan po HR series FS objective G plan po series Optional accessories Description X camera adapter (with C-mount adapter) C-mount adapter Stage micrometer 12AAA16 Lens cleaning set 12AAA846 Foot switch V-block with clamp (Max. workpiece ø2 mm) Rotary table with fine feed wheel ø183 mm Rotary table with fine feed wheel ø240 mm Bulbs 12BAB34 Halogen bulb (24V/0W) Halogen bulb (24V, 100W) 12BAD602 High intensity bulb (24V/100W) DIC Units DIC unit for 100X, SL80X, SL0X objective DIC unit for 0X, SL20X objective DIC unit for 20X objective DIC unit for 10X, X objective Eyepieces X eyepiece X eyepiece Filters 12AAA643 ND2 colour filter 12AAA644 ND8 colour filter 12AAA64 GIF filter (transmitted / surface) 12AAA646 LB80 colour filter (transmitted / surface) 12AAG807 LB80 filter 12AAG806 GIF filter Lighting D Twin fibre-optic illuminator D Halogen unit (12V, 100W) D Halogen unit (12V, 10W) D Halogen unit Reticles 12AAG876 Cross-hair reticle (3 μm width) 12AAG877 Cross-hair reticle ( μm width) 12AAG878 Cross-hair reticle (7 μm width) 12AAG879 Cross-hair and 4 angle 12AAG880 Broken cross-hair and 60 angle 12AAG881 Zeiss type chart Stands Vibration damping stand Turrets (required option) Manual turret BF 4 mounts D Power turret BF mounts Manual turret BF/DF 4 mounts D Power turret BF/DF 4 mounts D Power turret BF 4 mounts Workpiece Fixture Holder with clamp Swivel centre support 470

24 Accessories for Measuring Microscope MF-U Generation D Series 176 Accessories/system diagram for MF-U motor driven models Main unit Remote box (reflected + transmitted) LED unit *1 External light source control cable 12AAG888 Filters for main unit transmitted GIF filter 12AAA64 LB80 Filter 12AAA646 External light source control cable 12AAD128 ND2 Filter 12AAA643 ND8 Filter 12AAA644 Reflected 10W fiber unit 100W fiber unit * *1 Transmitted Halogen unit Twin fiber optics illuminator (100W) * *1 Connection to a Vision unit 100W External filter GIF filter (for light source) 12AAG0806 LB80 filter (for light source) 12AAG807 Data calculation processing RS232C (crossing) cable 12AAA807 Note: D-sub 9-pin female-female cable QM-Data *1 Vision unit Vision unit 10D QSPAK VUE PC is required. Thermal printer DPU414 *1 (with connecting cable) Foot switch (highly rigid type) 12AAJ088 Vision AF cable 12AAN38 Foot switch (highly rigid type) 12AAJ088 Calibration chart 02AKN020 Calibration chart (with holder) 02ATN69 Optical tube Control unit Remote BOX Control unit 10X eyepiece (two)/ (one) 1X eyepiece (two)/ (one) 20X eyepiece (two)/ (one) MF-U D Motorized Focus detection Focus pilot *1 (green)/ *1 (red) Note: Factory installed option. Remote box Various rectiles Revolver/objective Polarization/ differential interference Peripheral device for stage Rotary table with fine feed wheel (B) Differential interference unit X, 10X X X, SL20X X, SL0X, SL80X Polarization unit Stage adapter Motorized Motorized LAF Bright-field/ dark-field (BD) Bright-field (BF) Turret 4 holes (BD) Motor turret 4 holes (BD) *1 Manual turret with sensor (BD) Adjustable turret (BF) Aligning motor driver holes (BF) *1 Manual turret with sensor (BF) RS232C (crossing) cable 12AAA807 Note: D-sub 9-pin female-female cable. Note: Make sure that you select this cable for electric LAF. Objectives Objectives for BD BD Plan Apo Series BD Plan Apo SL Series Objectives for BF M Plan Apo Series M Plan Apo SL Series G Plan Apo Series Holder with cramp V-block with cramp Swivel center support Note: Objectives and turrets for LAF are factory-installed options. *1 Order depends on the destination. Refer to the corresponding page for details. Required. Standard accessory. 471

25 Optional Light Sources for Measuring Microscopes MF/MF-U Generation D Series 176 Dual Swan-neck Light-pipe Dual Swan-neck Light-pipe LED Ring Light (for FS Objective lenses) Fibre-optic Ring Light Dual Swan-neck Light-pipe illuminator Applicable microscopes : MF, MF-U models Length of fibre cable : 700 mm Light source : Halogen bulb (12V, 100W) (17181 : halogen bulb) Dimensions : Light unit 23 x 76 x 120 mm D Fibre-optic Ring Light Applicable microscopes : MF models Length of fibre cable : 1000 mm Light source : Halogen bulb (12V, 100W) (17181 : halogen bulb) Dimensions : Light unit 23 x 76 x 120 mm D CED LED Ring Light LED Ring Light Applicable microscopes : MF models with 1X, 3X, X, 10X objective Light source : White LED Length of LED cable : 100 mm D Fibre-optic Ring Light LED Ring Light 472

26 Accessories for MF/MF-U Generation D Focus Pilot FP-0 /FP-0U By installing this system on the camera mount of an MF series measuring microscope and projecting the focusing chart onto the workpiece surface, you can detect the focal point with high accuracy and high repeatability. The Focus Pilot FP-0 / FP-0U offers you the following benefits: You can easily adjust the brightness of the image. You can achieve a wide view field observation on the monitor using a CCD camera (a C-mount adapter is included). You are offered a choice of four chart patterns, so you can select the pattern that works best with your workpiece surface texture type. Focus Pilot is factory set option Concentric circle Slit Manual and Power Turrets Focus Pilot Magnification : 0,X, Accuracy : 0,1% (within 2/3 area from the centre of field of view) Camera adapter : C-mount (provided) Applicable CCD camera : Up to 2/3-inch / 16,9 mm Mass : 1,8 kg Model Light source 37-07D MF Green LED 37-08D MF Red LED D MF-U Green LED D MF-U Red LED Manual Turrets for MF-U Objective lens Remarks Bright Field / Dark Field 4 Mounts Bright Field 4 Mounts Stage Micrometer Power Turrets for MF-U Power supply : 240V AC, 0/60 Hz Dimensions : Turret : 164 x 6 x 137 mm Control Box : 108 x 72 x 193 mm Objective lens Remarks D Bright Field / Dark Field 4 Mounts D Bright Field 4 Mounts D Bright Field Mounts Stage Micrometer Range [mm] Accuracy (1+L) μm L : Measuring length (mm) Mass [g]

27 Measuring Microscope Hyper MF/MF-U Generation B Series Series 176 This measuring microscope has one of the highest XY measuring accuracies at 0,9+3L/1000 μm. The Hyper MF-B/MF-UB offers you the following benefits: One of the highest XY measuring accuracies in the world (0,9+3L/1000) 1 μm Selectable LAF (Laser Auto Focus) function. High operability and repeatability. Three-axis motorized control. You are offered the power-drive auto focus unit as standard. A range of useful fixtures is available that includes a wafer holder and swivel-centre support. 1. (L = measured length (mm) in XY plane, stage unloaded). Hyper MF-UF21B with optional turret and objective lenses Specifications Observation image Optical tube Eyepiece Turret (optional) Transmitted Surface Dimensions (WxDxH) Data output Power supply Optional Accessories Erect Reticle projection method, with TV mount, Optical path ratio Hyper MF : Monocular or binocular tube (optional depression : 2 ) Hyper MF-U : Siedentoph type (pupil distance adjustment : 1-76 mm), 1X tube lens, Binocular tube (depression : 2 ) Hyper MF : Optional 10X, 1X, 20X Hyper MF-U : 10X (field : 24 mm), Optional : 1X, 20X Hyper MF-U : Motorized Objective (optional) : M / BD Plan Apo objective from 1X to 100X Light source : Halogen bulb (12V, 100W)(fiber-optic cold light ) Optical system : Telecentric with adjustable aperture diaphragms Functions : Light intensity adjustable, 100 steps brightness adjustment Light source : Halogen bulb (12V, 0W) Optical system : Koehler with adjustable aperture diaphragms Functions : Light intensity adjustable, 100 steps brightness adjustment 160 x 476 x 381 mm (power unit) Hyper MF : 880 x 913 x 730 mm (main unit) Hyper MF-U : 880 x 913 x 770 mm (main unit) mm Via RS-232C interface 220/240V AC, 0/60 Hz See MF accessories for Hyper MF or MF-U models Measuring unit : Linear encoder Resolution : 0,01 μm Max. workpiece height : 10 mm Model Hyper Hyper Hyper Hyper Hyper MF-B21B MF-UB21B MF-UD21B MF-UE21B MF-UF21B D D D D D Laser auto focus function Available Available XY stage travel range mm 20 x x x x x 10 Effective glass size mm 300 x x x x x 200 Swiveling function (left) ±3 ±3 ±3 ±3 ±3 Observation type Bright Field Bright Field Bright Field or Bright Field/Dark Field Bright Field Bright Field or Bright Field/Dark Field XY stage top size mm 460 x x x x x 30 Max. stage loading kg kg (power unit) Hyper MF : kg (power unit) Hyper MF : kg (power unit) Hyper MF : kg (power unit) Hyper MF : kg (power unit) Hyper MF : 20 Mass kg (main unit) kg (main unit) kg (main unit) kg (main unit) kg (main unit) Hyper MF-U : Hyper MF-U : Hyper MF-U : Hyper MF-U : Hyper MF-U : 2 kg (main unit) 2 kg (main unit) 2 kg (main unit) 2 kg (main unit) 2 kg (main unit) Control panel for fast traverse and three-axis positioning Laser Auto Focus Optical Tube Refer to the Hyper MF / MF-U brochure 474

28 Measuring Microscope Hyper MF/MF-U Generation B Series Optional accessories Description D Data processing unit QM-Data 200 for Hyper MF/MF-U See MF accessories for Hyper MF models or MF-U accessories for Hyper MF-U models Series 176 mm Hyper MF-B21B mm Hyper MF-UB21B QM-Data D data processing unit Vision Unit PC-based vision measuring system 47

29 Vision Unit Series 39 This vision system retrofit for microscopes allows you to complete your measurement in one easy step with its automatic edge-detection tools and various macro icons. The Vision Unit offers you the following benefits: Easy operation due to the graphics and measurement navigation functions. Image data input/storage function. Measurement results are output to Microsoft Excel ; this lets you generate an inspection table on the same computer. The unit allows you to verify that measurement results are within the tolerance zones and to carry out various types of statistical processing for each item. Combined use with the focus pilot gives you high accuracy in height measurements (patent pending). You can perform a series of measuring operations using just one screen display. The auto-brightness control function reproduces type and degree of used. Specifications Projected image Camera unit Adapter unit Magnification QSPAK VUE, optional software Inverted Image sensor : 1/2" / 12,7 mm color CMOS camera Dimensions : 100 x 8 x 89 mm (W x D x H) Mass : 0,4 kg Operating software : QSPAK VUE (optional) Dimensions : 4 x 123 mm Magnification : 0,X Mass : 0,3 kg 19X X on 22" / 6 cm monitor (image resizable) For observation/comparison of form - Template matching function - Manual pattern matching function For simple measurement - One-click edge detection tool function - Smart tool function - User macro function Functions for repeated measurement/auto-measurement - Quick navigation - Playback - Graphic - External data output - Statistical calculation Standard accessories Description 12AAJ088 Footswitch The PC system, QSPAK VUE software and microscope are optional. Model Description Vision Unit 10D For MF-D / MF-UD generation manual and motorized models Vision Unt 9D For MF-C generation Vision Unit 9UD For MF-UC generation Vision Unit 8D For MF-B generation Vision Unit 8UD For MF-UB generation Vision Unit 7D For Hyper MF-B / Hyper MF-UB generation Vision Unit 6D For MF-A generation Vision Unit 6UD For MF-UA generation One-click Edge Detection Just by clicking the mouse near the edge of a workpiece, QSPAK automatically scans the edge and detects it, showing its coordinates. This function also works with the point tool, box tool, circle tool and auto-focus tool. Graphic Window The measurement results and measured elements are plotted in the graphic window in real-time. By using this function the user can check the current measuring position at a glance. The graphic window can be used for geometrical calculations. QSPAK VUE Measurement Window 476

30 Quick Guide to Precision Measuring Instruments Microscopes Numerical Aperture (NA) Resolving Power (R) Working Distance (W.D.) Parfocal Distance A point-source on the specimen Parfocal distance Working distance Objective lens Image forming (tube) lens Light from point source is focused at the intermediate image plane f 1 f 2 Magnification of the objective = f2/f1 Infinity space A point-source on the workpiece L1 Objective lens Light from point source is focused at the intermediate image plane Magnification of the objective = L2/L1 Focal Length (f) Focal Point L2 2 M Plan Apo 100X NA = Illumination 477

31 Aperture Diagram Erect Image (1) The range of the workpiece that can be observed with the microscope (diameter) (2) Monitor observation range Size of image sensor 478

32 Microscope Unit FS70 Series Specifications Focus adjustment Method : With concentric coarse and fine focusing wheels (right and left) Range : 0mm travel range, 0,1mm/ rev. for fine adjustment, 3,8mm/rev. for coarse adjustment Erect image Trinocular tube Image Interpupillary Siedentopf type, adjustment distance range : 1-76mm Field number 24 Tilt angle 0-20 (only - TH, - THS models) Illumination Reflective for bright system field ( Koehler, with Light source Objective lens (optional) FS-70L/L4 aperture diaphragm) 12 V / 100 W fibre-optic, nonstopped adjustment, light guide length 1,m, power consumption 10W M Plan Apo, M Plan Apo SL, G Plan Apo The FS70L supports three YAG laser wavelengths (1064 nm, 32 nm and 3 nm), while the FS70L4 supports two wavelengths (32 nm and 266 nm), thus expanding the scope of laser applications, allowing laser-cutting of thin-films used in semiconductors and liquid crystal substrates. However, Mitutoyo assumes no responsibility whatever for the performance and/or safety of the laser system used with Mitutoyo microscopes. A careful examination is recommended when selecting a laser-emission unit. Bright field, Differential Interference Contrast (DIC) and polarized observations are standard with the FS70Z. The FS70L and FS70L4 do not support the DIC method. By employing an inward-leaning turret, the long working distance objectives provide excellent operability. Refer to the Microscope Units and objective lenses brochure Series Microscope Unit for Semiconductor Inspection Excellent operability with the inward rotating turret and high quality objective lenses with long working distance. Ideal as the microscope unit of a prober station for semiconductors. The L- and L4-models support YAG laser wavelength ranges from 266 up to 1064 nm allowing laser cutting of thin films and liquid crystal substrates. Ergonomic design with combined knob for coarse- and enlarged fine focus adjustment. FS70Z FS70L FS70L4 Model FS70 FS70-TH FS70Z FS70Z-TH Model short base FS70-S FS70-THS FS70Z-S FS70Z-THS Order short base model Optical pass ratio 0/0 0/0 0/0 0/0 Tube lens 1X 1X 1X, 2X zoom 1X, 2X zoom Camera mount C-mount (using optional adapter B) C-mount (using optional adapter B) C-mount (using optional adapter B) C-mount (using optional adapter B) Loading (*¹) kg 14, 13,6 14,1 13,2 Mass kg 6,1 7,1 6,6 7, (*¹) Loading on optical tube excluding weight of objective lenses and eyepieces. Model FS70L FS70L-TH FS70L4 FS70L4-TH Model short base FS70L-S FS70L-THS FS70L4-S FS70L4-THS Order short base model Optical pass ratio 100/0 or 0/ /0 or 0/ /0 or 0/ /0 or 0/100 Protective filter Built-in laser beam filter Built-in laser beam filter Built-in laser beam Built-in laser filter beam filter Tube lens 1X 1X 1X 1X Applicable laser 1064/32//3 nm 1064/32/3 nm 32/266 nm 32/266 nm Camera mount Use a laser with TV port. Use a laser with TV port. C-mount receptacle (with green filter switch) C-mount receptacle (with green filter switch) Objective, optional M/LCD Plan NIR M/LCD M/LCD Plan NIR M/LCD (for laser-cutting) Plan NUV Plan NUV M Plan UV M Plan UV Loading (*¹) kg 14,2 13, 13,9 13,1 Mass kg 6,4 7,2 6,7 7, (*¹) Loading on optical tube excluding weight of objective lenses and eyepieces. 479

33 Video Microscope Unit VMU Series Series 378 The VMU is a compact, lightweight and easy-to-install microscope unit for CCD camera monitoring in semiconductor fabrication facilities. The VMU offers you the following benefits: The optical system features ultra-long working distance objectives and correction for the wide range of radiation wavelengths in use. Reflected keeps your workpiece free from thermal expansion (the fibreoptic illuminator is required.) Also available with a laser mount or turret (objective mount). Specifications Magnification of tube Reflected 1X - Telecentric system with aperture stop system - Fibre-optic illuminator (optional) is required Light source Halogen bulb (21V, 10W) (optional) Objective lenses for bright field observation (Optional accessory) M Plan Apo, M Plan Apo SL, G Plan Apo Objective lenses for laser cutting (Optional accessory) Objective lenses for laser machining (Optional accessory) M plan Apo NIR, LCD Plan Apo NIR, M Plan Apo NUV and LCD Plan Apo NUV M Plan UV (for only) VMU-H Refer to the microscope units and objective lenses brochure VMU-V VMU-LB VMU-L4B Selection Guide to System Configuration (Depends on each system configuration) Applicable Wavelength Vertical CCD camera mount Horizontal CCD camera mount YAG laser mount Fibre optic unit mount Near-infrared and visible radiation Yes Yes Near-infrared and visible radiation Yes Yes Near-infrared, visible, near-ultraviolet radiation Yes Yes Yes Near infrared, visible, near ultraviolet and ultraviolet radiation Yes Yes Yes 1300 Mass [g] 480

34 Video Microscope Unit VMU Series Series 378 Refer to the microscope units and objective lenses brochure The WIDE VMU series takes video microscopy to the next level with a 7 times bigger field of view than conventional models. It supports both bright field and dark field observation. The WIDE VMU offers the following benefits: Supported sensor size of 2-inch-equivalent, APS-C format Image field of ø30 mm with 1X tube lens Both F-mount and C-mount cameras can be mounted BF observations are supported by the WIDE VMU-V and -H models, BD observations are supported by the WIDE VMU-BDV and -BDH models With the flexible orientation for camera and mounting very compact arrangements can be configured. WIDE VMU-V WIDE VMU-H WIDE VMU-BDV WIDE VMU-BDH Highly compact configuration of 4 WIDE VMU units Camera mount Observation type Illumination mount Suitable objectives Vertical Bright field (BF) Single port Bright field (BF) series Horizontal Bright field (BF) Single port Bright field (BF) series Vertical Bright field / Dark field (BD) Dual port Bright field / Dark field (BD) series Horizontal Bright field / Dark field (BD) Dual port Bright field / Dark field (BD) series Optional accessories: Motorized turret, focusing unit, polarizer 481

35 Wide Field Eyepiece WF Series 378 Extra-wide field of view type. Optional reticles are available. Applicable microscope models: MF-C, MF-UC, Hyper MF, Hyper MF-U, FS70. Optional accessories Description Reticle cross-hair 1676 Reticle broken cross-hair 90, mm scale (Min. reading: 0.1 mm) with cross hair reticle 1677 Reticle concentric circle Ø1.2 mm mm scale (Min. reading : 0.1 mm) 1680 mm scale (Min. reading : 0.0 mm) Individual Magnification Field number Correction range Eye point Mass [g] X 24-10D to +D High X 16-8D to +D Normal X 12-8D to +D Normal Refer to the microscope units and objective lenses brochure Two-piece sets Magnification Field number Correction range Eye point Mass [g] X 24-10D bis +D High X 16-8D to +D Normal X 12-8D to +D Normal Finity Corrected Objective Lens ML-Series Series 37 The Mitutoyo 37 Series finity corrected objective lenses realize clear images and long working distance. Specifications Abbreviations in product table Mag. : Magnification N.A. : Numerical aperture W.D. : Working distance D.F. : Focal depth Magnification N.A. W.D. D.F X 0,03 61 mm 306 μm X 0,09 77 mm 34 μm X 0,13 61 mm 23 μm X 0,21 1 mm 6,2 μm X 0,42 20 mm 1,6 μm X 0, 13 mm 0,9 μm X 0,7 6 mm 0,6 μm 482

36 Objective Lens M Plan Series Specifications Features - The long working distance type objective lenses provide excellent clearance between the lens surface and the workpiece surface in focus, making it possible to observe workpieces which are usually hard-to-focus because of awkward projections. Series 378 The Mitutoyo 378 Series objectives have one of the world s longest working distances and an infinitycorrection optical system. These objectives give you flexible observation at high magnifications and independent correction of chromatic aberration. - The metallurgical plan apochromatic (M Plan Apo) objective lens is an excellent optical system. This objective provides a flat, chromatic aberration-free image throughout the field of view, making it is suitable for any type of microscope. - Specially designed objective lenses are also available with correction for the nearinfrared, near-ultraviolet and ultraviolet regions of the spectrum, or various thicknesses of LCD screen glass. M Plan Apo and M Plan Apo SL Objectives for bright field observation - The mounting screw threads of objective lenses are designed to conform to JIS B Refer to the microscope units and objective lenses brochure BD Plan Apo and BD Plan Apo SL Objectives for bright/dark field observation Near-ultraviolet wavelength corrected M Plan Apo NUV objectives Ultraviolet wavelength corrected M Plan UV objectives Near-infrared wavelength corrected M Plan Apo NIR objectives 483

37 Objective Lens for Brightfield Observations FS- Series Series (W.D.) 1/4 wave length filter ø38 ø (W.D.) ø24 ø (W.D.) ø24. ø (W.D.) ø23.8 ø (W.D.) ø22 ø2 13 (W.D.) ø21. ø2.2 Specifications Abbreviations in product table Mag. : Magnification N.A. : Numerical aperture W.D. : Working distance f : Focal distance R : Resolving power D.F. : Focal depth F.O.V. 1 : Field of view when using ø24 mm eyepiece F.O.V. 2 : Field of view when using 1/2" / 12,7 mm CCD camera (W.D.) ø17 ø (W.D.) ø22 ø Refer to the microscope units and objective lenses brochure M Plan Apo for Bright Field Observation Compatible with microscope types VMU / FS-70 / MF-U / Hyper MF-U Note : Polarizing unit ( ) is required when using 1X objective. Magnification N.A. W.D. f R D.F. F.O.V. 1 F.O.V. 2 Mass [g] X 0,02 11 mm μm 440 μm ø24 mm 4,8x6,4 mm X 0,0 34 mm 100 μm 91 μm ø12 mm 2,4x3,2 mm X 0,14 34 mm 40 2 μm 14 μm ø4,8 mm 0,96x1,28 mm ,X 0,21 3 mm 26,67 1,3 μm 6,2 μm ø3,6 mm 0,64x0,8 mm X 0,28 33, mm 20 1 μm 3, μm ø2,4 mm 0,48x0,64 mm X 0,42 20 mm 10 0,7 μm 1,6 μm ø1,2 mm 0,24x0,32 mm X 0, 13 mm 4 0, μm 0,9 μm ø0,48 mm 0,1x0,13 mm X 0,7 6 mm 2 0,4 0,6 μm ø0,24 mm 0,0x0,06 mm 320 M Plan Apo SL for Bright Field Observation Compatible with microscope types VMU / FS-70 / MF-U / Hyper MF-U Note : These objectives offer extra-long working distance. Magnification N.A. W.D. f R D.F. F.O.V. 1 F.O.V. 2 Mass [g] X 0,28 30,mm 10 1μm 3,μm ø1,2mm 0,24x0,32mm X 0,42 20, mm 4 0,7 μm 1,6 μm ø0,48 mm 0,1x0,13 mm X 0, 1 mm 2, 0,6 μm 1,1 μm ø0,3 mm 0,06x0,08 mm X 0, 13 mm 2 0, μm 0,9 μm ø0,24 mm 0,0x0,06 mm X 0,62 13 mm 1 0,4 μm 0,7 μm ø0,12 mm 0,02x0,03 mm (W.D.) ø23.47 ø (W.D.) ø (W.D.) ø24.2 ø (W.D.) (W.D.) ø21.6 ø2.2 ø22 ø2.2 ø27.3 ø29.4 ø

38 Objective Lens for Brightfield Observations FS- Series Specifications Abbreviations in product table Mag. : Magnification N.A. : Numerical aperture W.D. : Working distance f : Focal distance R : Resolving power D.F. : Focal depth F.O.V. 1 : Field of view when using ø24 mm eyepiece F.O.V. 2 : Field of view when using 1/2" / 12,7 mm CCD camera Series (W.D.) Glass ø23 ø (W.D.) Glass ø23 ø2 Refer to the microscope units and objective lenses brochure Glass Thickness Corrected G Plan Apo for Bright Field Observation Compatible with microscope types VMU / FS-70 / MF-U / Hyper MF-U Note : The G Plan Apo Series are designed for observing a workpiece through glass (thickness : 3, mm). Magnification N.A. W.D. f R D.F. F.O.V. 1 F.O.V. 2 Mass [g] X 0,28 29,42 mm 10 1 μm 3, μm ø1,2 mm 0,24x0,32 mm X 0, 13,89 mm 4 0,6 μm 1,1 μm ø0,48 mm 0,1x0,13 mm 320 M Plan Apo HR for Bright Field Observation Compatible with microscope types VMU / FS-70 / MF-U / Hyper MF-U Note : These objectives offer extra-high resolving power. Magnification N.A. W.D. f R D.F. F.O.V. 1 F.O.V. 2 Mass [g] X 0,42 1 mm 20 0,7 μm 1,6 μm ø2,4 mm 0,48x0,64 mm X 0,7,2 mm 4 0,4 μm 0,49 μm ø0,48 mm 0,1x0,13 mm X 0,9 1,3 mm 2 0,3 μm 0,34 μm ø0,24 mm 0,0x0,06 mm 410 ø39 (W.D) 1 1 (W.D) (W.D) 1.3 ø26 ø10.4 ø37 ø

39 Objective Lens for Brightfield/Darkfield Observation FS-Series Series 378 ø (W.D) (W.D) ø44 ø37 ø40 ø42 ø (W.D) (W.D) ø44 ø37 ø40 ø42 ø (W.D) (W.D) ø44 ø37 ø40 ø42 Specifications Abbreviations in product table Mag. : Magnification N.A. : Numerical aperture W.D. : Working distance f : Focal distance R : Resolving power D.F. : Focal depth F.O.V. 1 : Field of view when using ø24 mm eyepiece F.O.V. 2 : Field of view when using 1/2" / 12,7 mm CCD camera ø37 ø40 ø42 ø32 ø40 ø42 ø32 ø40 ø42 ø (W.D) Refer to the microscope units and objective lenses brochure ø31. ø40 ø BD Plan Apo for Bright/Dark Field Observation Compatible with microscope types MF-U / Hyper MF-U Magnification N.A. W.D. f R D.F. F.O.V. 1 F.O.V. 2 Mass [g] X 0,0 34 mm 100 μm 91 μm ø12 mm 2,4x3,2 mm X 0,14 34 mm 40 2 μm 14 μm ø4,8 mm 0,96x1,28 mm ,X 0,21 34 mm 26,67 1,3 μm 6,2 μm ø3,6 mm 0,64x0,8 mm X 0,28 34 mm 20 1 μm 3, μm ø2,4 mm 0,48x0,64 mm X 0,42 20 mm 10 0,7 μm 1,6 μm ø1,2 mm 0,24x0,32 mm X 0, 13 mm 4 0, μm 0,9 μm ø0,48 mm 0,1x0,13 mm X 0,7 6 mm 2 0,4 μm 0,6 μm ø0,24 mm 0,0x0,06 mm 460 BD Plan Apo HR for Bright/Dark Field Observation Compatible with microscope types MF-U / Hyper MF-U Note : These objectives offer extra-high resolving power. Magnification N.A. W.D. f R D.F. F.O.V. 1 F.O.V. 2 Mass [g] X 0,7,2 mm 4 0,4 μm 0,49 μm ø0,48 mm 0,1x0,13 mm X 0,9 1,3 mm 2 0,3 μm 0,34 μm ø0,24 mm 0,0x0,06 mm 4 BD Plan Apo SL for Bright/Dark Field Observation Compatible with microscope types MF-U / Hyper MF-U Note : These objectives offer extra-long working distance. Magnification N.A. W.D. f R D.F. F.O.V. 1 F.O.V. 2 Mass [g] X 0,28 30, mm 10 1 μm 3, μm ø1,2 mm 0,24x0,32 mm X 0,42 20 mm 4 0,7 μm 1,6 μm ø0,48 mm 0,1x0,13 mm X 0, 13 mm ,6 μm 1,1 μm ø0,3 mm 0,06x0,08 mm X 0, 13 mm 2 0, μm 0,9 μm ø0,24 mm 0,0x0,06 mm 440 ø (W.D.) ø (W.D.) ø (W.D.) ø (W.D.) ø31 ø40 ø42 ø32 ø40 ø42 ø32 ø40 ø42 ø32 ø40 ø

40 Objective Lens for NIR, NUV and UV Observation FS-Series Specifications Abbreviations in product table Mag. : Magnification N.A. : Numerical aperture W.D. : Working distance f : Focal distance R : Resolving power D.F. : Focal depth F.O.V. 1 : Field of view when using ø24 mm eyepiece F.O.V. 2 : Field of view when using 1/2" / 12,7 mm CCD camera M Plan Apo NIR Note : These objective lenses are designed so that the image of a workpiece remains focused within the focal depth even when the wavelength used is changed from within the visible range up to the near-infrared (480 to 1800 nm). Therefore the M Plan NIR Series are suitable for laser repair. However, when the wavelength used exceeds 1100 nm, the focussing position may deviate slightly from that in the visible range due to changes in glass dispersion and refractive index. Series (W.D.) ø24.6 ø (W.D.) ø24.4 ø (W.D.) ø24.6 ø (W.D.) ø24.6 ø2 ø (W.D.) ø24.4 ø24.8 (Working distance) Near-infrared wavelength Corrected M Plan Apo NIR for Bright Field Observation Compatible with microscope types VMU / FS-70 Magnification N.A. W.D. f R D.F. F.O.V. 1 F.O.V. 2 Mass [g] X 0,14 37, mm 40 2 μm 14 μm ø4,8 mm 0,96x1,28 mm X 0,26 30, mm 20 1,1 μm 4,1 μm ø2,4 mm 0,48x0,64 mm X 0,4 20 mm 10 0,7 μm 1,7 μm ø1,2 mm 0,24x0,32 mm X 0,42 17 mm 4 0,7 μm 1,6 μm ø0,48 mm 0,1x0,13 mm X 0, 12 mm 2 0,6 μm 1,1 μm ø0,24 mm 0,0x0,06 mm X 0,6 10 mm 4 0,42 μm 0,6 μm ø0,48 mm 0,1x0,13 mm X 0,7 10 mm 2 0,39 μm 0,6 μm ø0,24 mm 0,0x0,06 mm 40 ø27.6 ø28 ø37 Specifications Abbreviations in product table Refer to the microscope units and objective lenses brochure Mag. : Magnification N.A. : Numerical aperture W.D. : Working distance f : Focal distance R : Resolving power D.F. : Focal depth F.O.V. 1 : Field of view when using ø24 mm eyepiece F.O.V. 2 : Field of view when using 1/2" / 12,7 mm CCD camera Refer to the microscope units and objective lenses brochure Series (W.D.) ø24.6 ø (W.D.) ø24.4 ø (W.D.) Near-infrared wavelength and LCD Glass Thickness Corrected LCD Plan Apo NIR for Bright Field Observation Compatible with microscope types VMU / FS-70 Note : W.D. is just measured in air, not through an LCD glass Mag./glass thickness N.A. W.D. f R D.F. F.O.V. 1 F.O.V. 2 [mm] ø24.4 ø X/t1,1 0,4 19,98 mm 10 0,7 μm 1,7 μm ø1,2 mm 0,24x0,32 mm X/t1,1 0,42 17,13 mm 3,9 0,7 μm 1,6 μm ø0,48 mm 0,1x0,13 mm X/t0,7 0,42 17,26 mm 3,9 0,7 μm 1,6 μm ø0,48 mm 0,1x0,13 mm X/t1,1 0, 12,13 mm 2 0,6 μm 1,1 μm ø0,24 mm 0,0x0,06 mm X/t0,7 0, 11,76 mm 2 0,6 μm 1,1 μm ø0,24 mm 0,0x0,06 mm 33 Mass [g] Near-ultraviolet wavelength Corrected M Plan Apo NUV for Bright Field Observation Compatible with microscope types VMU / FS-70 Magnification N.A. W.D. f R D.F. F.O.V. 1 F.O.V. 2 Mass [g] X 0,28 30, mm 20 1 μm 3, μm ø2,4 mm 0,48x0,64 mm X 0,4 17 mm 10 0,7 μm 1,7 μm ø1,2 mm 0,24x0,32 mm X 0,42 1 mm 4 0,7 μm 1,6 μm ø0,48 mm 0,1x0,13 mm X 0,6 10 mm 4 0,42 μm 0,6 μm ø0,48 mm 0,1x0,13 mm X 0, 11 mm 2 0,6 μm 1,1 μm ø0,24 mm 0,0x0,06 mm

41 Objective Lens for NIR, NUV and UV Observation FS-Series (W.D.) 17(W.D.) ø (W.D.) ø24 ø2 2.6 ø24.4 ø (W.D.) ø23.4 ø Series (W.D.) (W.D.) ø24.4 ø (W.D.) ø23.4 ø24.4 Near-ultraviolet wavelength and LCD Glass Thickness Corrected LCD Plan Apo NUV for Bright Field Observation Compatible with microscope types VMU / FS-70 Note : For , W.D. is just measured in air, not through an LCD glass Mag./glass thickness N.A. W.D. f R D.F. F.O.V. 1 F.O.V. 2 [mm] X/t1,1 0,42 14,3 mm 4 0,7 μm 1,6 μm ø0,48 mm 0,1x0,13 mm X/t0,7 0,42 14,76 mm 4 0,7 μm 1,6 μm ø0,48 mm 0,1x0,13 mm X/t1,1 0, 11,03 mm 2 0,6 μm 1,1 μm ø0,24 mm 0,0x0,06 mm 380 Mass [g] Specifications Abbreviations in product table Refer to the microscope units and objective lenses brochure Mag. : Magnification N.A. : Numerical aperture W.D. : Working distance f : Focal distance R : Resolving power D.F. : Focal depth F.O.V. 1 : Field of view when using ø24 mm eyepiece F.O.V. 2 : Field of view when using 1/2" / 12,7 mm CCD camera Ultraviolet wavelenght Corrected M Plan UV for Bright Field Observation Compatible with microscope types VMU / FS-70 Magnification N.A. W.D. f R D.F. F.O.V. 1 F.O.V. 2 Mass [g] X 0,2 20 mm 20 1,1 μm 4,4 μm ø2,4 mm 0,48x0,64 mm X 0,36 1 mm 10 2,1 μm ø1,2 mm 0,24x0,32 mm X 0,4 12 mm 4 0,7 μm 1,7 μm ø0,48 mm 0,1x0,13 mm X 0, 10 mm , μm 0,9 μm ø0,3 mm 0,06x0,08 mm (W.D.) 12 (W.D.) 10 (W.D.)

42 Measuring Projector PJ-A3000 Series Specifications Projected image Inverted Projector screen Effective diameter : 31 mm Screen material : Fine-ground glass Screen rotation : ±360, fine feed and clamp Angle display : Digital counter (LED) Resolution : 1' or 0,01 (switchable) Range : ±370 ABS/INC mode switching, Zero Set Reference lines : Cross-hairs Projection lens 10X ( ) Optional : 20X, 0X, 100X Magnification Contour : ±0,1% or accuracy better Surface : ±0,1% or better Contour Surface Focusing Resolution Power supply Light source : Halogen bulb (24V, 10W) Optical system : Telecentric Functions : 2-step (High/Low) brightness switch, Heat-absorbing filter, Cooling fan Light source : Halogen bulb (24V, 10W) Optical system : Vertical with adjustable condenser lens Functions : Heat-absorbing filter, Cooling fan Manual 0,001 mm (0,001 mm : digital head) V AC, 0/60Hz Series 302 The PJ-A3000 Series profile projector is a medium-sized model that gives you excellent versatility and easy operation. The PJ-A3000 offers you the following benefits: The easy-to-read digital XY counter is located near the projection screen to minimize eye movement. You can measure angles easily with the digital readout protractor screen D D W H D : Max. workpiece diameter W : Working distance H : Max. workpiece height Standard scale 0 mm: Reading scale 200 mm: Reading scale 300 mm: Overlay chart, 12 sheet set: 12AAM027 Green filter: Projection screen Detector mounting plate: 12AAE671 QM-Data 200 Arm mount type: D RS232 Cable 12AAA807D - 2D Data processor / counter - Edge detection QM-Data 200 Stand Type 264-1D Optoeye-200: ( ) When using surface Swivel Center support: Swivel Center Support: Rotary Table 100mm: Rotary Table 100mm (with fine adjustment) Rotary Table (PJ-A300D-0): Holder with clamp: Stage pheripheral Projection lens Standard accessory PH-31F Projection lens 10X : Oblique mirror Projection lens 20X : Oblique mirror Projection lens 0X (With half reflecting mirror: Projection lens 100X (with half reflecting mirror) : Refer to the PJ-A3000 brochure V Block and Clamp: Fixture mount adapter for PJ-A3010F-200: D 489

43 Measuring Projector PJ-A3000 Series Series Metric model Metric XY stage 0 x 0 or 10 x 0 or 100 x100 or 200 x 100 mm Model PJ-A300D-0 PJ-A300F-10 PJ-A3010F-100 PJ-A3010F D D D D XY stage [mm] 0 x 0 10 x x x 100 Measuring method Digimatic micrometer Linear encoder Linear encoder Linear encoder head Quick-release mechanism _ X and Y axes X and Y axes X and Y axes XY stage table top size [mm] 12 x x x x 20 XY stage effective area [mm] 82 x x x x 170 Stage glass BAE Swiveling function _ ±3 Max stage loading [kg] Mass kg mm Standard accessories Description Projection lens 10X Protective hood 1230 Halogen bulb (24V, 10W) Optional accessories Description Standard scale 0 mm Green filter Reading scale 300 mm Swivel centre support Projection lens 20X Projection lens 0X Projection lens 100X Oblique mirror 10X Projection lens Oblique mirror 20X Projection lens V-block with clamp (Max. workpiece ø2 mm) Holder with clamp Reading scale 200 mm Green filter Swivel centre support D Fixture mount adapter 1230 Halogen bulb (24V, 10W) 12AAE671 Detector mounting plate for ø20 to ø30 mm Optoeye Rotary table 66 mm Rotary table 100 mm Rotary table 100 mm with fine adjustment 264-1D QM-Data 200 Stand type D QM-Data 200 Arm mount type : for stage 10 x 0 mm and : for stage 100 x 100 and 200 x 100 mm A = 93 mm : D, A = 446 mm : D A = 427 mm : D A 706 * Fixture mount adapter (999678) is required for D 264-1D, QM-Data 200 OPTOEYE D D D D

44 Measuring Projector PJ-H30 Series Specifications Accuracy (3+0,02L) μm L : Max length measurement Projected image Erect Projector screen Effective diameter : 306 mm Screen material : Fine-ground glass Screen rotation : ±360, fine adjustment and clamp Angle display : Digital counter (LED) Resolution : 1' or 0,01 (switchable) Range : ±370 ABS/INC mode switching, Zero Set Reference lines : Cross-hairs Projection lens 10X ( ) Optional : X, 20X, 0X, 100X Magnification Contour : ±0,1% or accuracy better Surface : ±0,1% or better Contour Surface Power supply Resolution Light source : Halogen bulb (24V, 10W) Optical system : Telecentric zoom Functions : Continuously variable brightness adjustment, Heatabsorbing filter, Cooling fan Light source : Halogen bulb (24V, 10W) Optical system : Vertical/Oblique with an adjustable condenser lens Functions : Continuously variable brightness adjustment, Heatabsorbing filter, Cooling fan 220V AC, 0/60Hz 0,001 mm Series 303 This measuring projector has adjustable incident. The PJ-H30 offers you the following benefits: By rotating the condenser lens and changing the angle of the mirror in the objective, you can represent even poorly reflecting surfaces optimally. Improved light intensity of a projected subject thanks to the new optical contour system. High measuring accuracy (above JIS standard). Measuring stage with rapid single-handed adjustment on both axes enabling you to switch smoothly between quick positioning and fine adjustment. Constant current power supply unit with acceleration control to maximize the service life of the halogen lamp. Easily read digital counter with large digit display. The PJ-H30D models also offer you a built-in precision edge detector (Optoeye). RS-232C output D Vertical / oblique switchable surface Vertical Oblique Profile Projector brochure on request 1010B 2010B 2017B 491

45 Measuring Projector PJ-H30 Series Series 303 Model 1010B x 100 mm XY stage table size : 300 x 240 mm XY stage effective area : 180 x 10 mm Stage glass : Swiveling function : ±3 Max stage loading : 10 kg Mass : 176 kg Model PJ-H30A PJ-H30D D D Focusing Manual Power focus Edge detector Optional Built-In Model 2010B x 100 mm XY stage table size : 30 x 280 mm XY stage effective area : 20 x 10 mm Stage glass : Swiveling function : ±3 Max stage loading : 10 kg Mass : 178 kg Model PJ-H30A PJ-H30D D D Focusing Manual Power focus Edge detector Optional Built-In Model 2017B x 170 mm XY stage table size : 410 x 342 mm XY stage effective area : 270 x 240 mm Stage glass : 12BAD363 Swiveling function : ± Max stage loading : 20 kg Mass : 20 kg Model PJ-H30A PJ-H30D D D Focusing Manual Power focus Edge detector Optional Built-In Model 3017B x 170 mm XY stage table size : 10 x 342 mm XY stage effective area : 370 x 240 mm Stage glass : 12BAD330 Swiveling function : ± Max stage loading : 20 kg Mass : 212 kg Model PJ-H30A PJ-H30D D D Focusing Manual Power focus Edge detector Optional Built-In 492

46 Measuring Projector PJ-H30 Series Optional accessories Description Optoeye AAE671 Detector mounting plate for ø20 to ø30 mm 12AAG983 Detector mounting bracket for PJ- H30A/PJ-H30E 12AAG981 Green filter Standard scale 0 mm Reading scale 200 mm Reading scale 300 mm Projection lens X Projection lens 20X Projection lens 0X Projection lens 100X Swivel centre support Swivel centre support Rotary table 100 mm with fine adjustment V-block with clamp (Max. workpiece ø2 mm) Rotary table with fine feed wheel ø183 mm Rotary table with fine feed wheel ø240 mm Cleaner for optics 12AAA807D RS-232C cable (2m) 12AAG982 Mounting stand for QM-Data D QM-Data 200 Stand type D QM-Data 200 Arm mount type Series B model 3017B model 264-1D QM-Data 200 Thermal Printer DPU414: 12AAD032 (with the connecting cable) FD-unit: 12AAA799 Footswitch: T External printer (ESC/P) cable: 12AAA804 QM-Data200 (arm-type specification) QM-Data200 (mounting stand:) 12AAG982 QM-Data200 (stand-type specification) RS-232C-cable (cross): 12AAA807 Note: The connectors at both ends are D-sub 9-pin female Real-time control program MeasurLink Inspection table generation program MeasureReport Note: A appropriate PC is required PC transferprogram option OPTOEYE 200: Detector mounting plate A: 12AAE671 RS-232C-cable (cross): 12AAA807D Note: The connectors at both ends are D-sub 9-pin female Footswitch: 12AAA846 Detector mounting bracket: 12AAG983 for PJ-H30 and PJ-H30A only Standard scale 0 mm: Reading scale 200 mm: Projection screen Edge detection Data calculation processing Counter data transfer Counter data printing Standard accessory Reading scale 300 mm: Overlay chart, 12-sheet set: 12AAM027 Green filer: 12AAG981 Halogen bulb 24V/10W (for contour/surface ): 130 Long-life halogen bulb 24V/10W (for contour/surface ):1230 Main unit contour Stage peripheral Projection lens PJ-H30 Projection lens X Projection lens 10X Projection lens 20X Projection lens 0X Projection lens 100X Size 0/1010 Size 2010 Size 2017/3017 Rotary table with fine feed wheel (A): Stage adapter C: Stage adapter A: Rotary table with fine feed wheel (B): Holder with clamp: V-block with clamp: Swivel center support: Swivel center support (small): Rotary table with fine feed wheel (with built-in scale) Holder with clamp: V-block with clamp: Swivel center support: Swivel center support (small): Holder with clamp: V-block with clamp: Swivel center support: Swivel center support (small): Digital rotary head (up to ø13): Digital rotary head (up to ø20):

47 Measuring Projector PV-110 Series 304 This measuring projector is a robust stand-alone device. The large rotatable screen guarantees you good observation and easy measuring. Specifications Projected image Inverted Projector screen Effective diameter : 08 mm Screen material : Fine-ground glass Screen rotation : ±360, fine adjustment and clamp Angle reading : Digital counter (LED) Resolution : 1' or 0,01 (switchable) Range : ±370 ABS/INC mode switching, Zero Set Reference lines : Cross-hairs Projection lens 10X ( ) Optional : X, 20X, 0X, 100X Magnification Contour : ±0,1% or accuracy better Surface : ±0,1% or better Contour Surface Focusing Resolution Power supply Mass Light source : Halogen bulb (24V, 10W) Optical system : Telecentric zoom Functions : 2-step (High/Low) brightness switch, Heat-absorbing filter, Cooling fan Light source : Halogen bulb (24V, 10W) Optical system : Vertical Functions : Adjustable condenser lens, Oblique (for X, 10X and 20X), Heat-absorbing filter, Cooling fan Manual 0,001 mm V AC, 0/60Hz 210 kg D Counter is optional ( ) When using surface Profile Projector brochure on request KA Counter QM-Data 200 OPTOEYE

48 Measuring Projector PV-110 Standard accessories Description X projection lens set including : Objective Condenser 1230 Halogen bulb (24V, 10W) 12AAF182 Digital counter stand Stage glass 280x Surface unit Optional accessories Description X projection lens set including : Objective Condenser Adapter for objective X projection lens set including : Objective Condenser X projection lens set including : Objective Condenser X projection lens set including : Objective Condenser Standard scale 0 mm Standard scale 80 mm Reading scale 300 mm Reading scale 600 mm Green filter Canopy Protective hood Rotary table 100 mm with fine adjustment Swivel centre support Holder with clamp V-block with clamp (Max. workpiece ø2 mm) Cleaner for optics D KA-Counter 2 axes 12AAE672 Optoeye mounting plate for ø00 to ø600 mm screen D QM-Data 200 Arm mount type Series Accessories/Dimensions Model PV D XY stage [mm] 200 x 100 Measuring method Linear encoder Quick-release mechanism X and Y axes XY stage table top size [mm] 380 x 20 XY stage effective area [mm] 266 x 170 Stage glass Swiveling function ±3 Max stage loading [kg] ø68 Standard scale 0 mm: Reading scale 200 mm: Reading scale 300 mm: Reading scale 600 mm: Overlay chart Green filter: QM-Data 200 *1 Arm mount type: D - 2D Data processor / counter - Edge detection 1073 Optoeye-200: Detector mounting plate: 12AAE672 2-axes Counter 1627 mm Counter stand: *2 12AAF182 MCOSMOS 2D Cable D-Sub 9: RS-232C Data output: 09CAB217D KA Counter (2-axes): * D Footswitch: Surface Illumination Projection lens set 10X : PV-110 Projection lens set X : Projection lens set 20X : Fixture mount adapter: D Projection lens set 0X : Swivel Center Support: Necessary option either chose *1 or *2 Projection lens set 100X : Rotary Table 100mm: Standard accessory Rotary Table 100mm (with fine adjustment) Holder with clamp: V Block and Clamp:

49 Measuring Projector PH-A14 Series 172 Measuring Projector PH-A14 Due to the PH-A14 s horizontal-beam, you can easily measure larger and heavier workpieces including toothed racks and punching tools. You can use the projector for a wide range of applications due to its generous 203 x 102 mm stage travel and 4 kg allowable stage loading. Specifications Projected image Inverted Projector screen Effective diameter : 36 mm Screen material : Fine-ground glass Screen rotation : ±360, fine adjustment and clamp Angle reading : Vernier, graduation : 1' Resolution : 1' or 0,01 (switchable) Range : ±370 Reference lines : Cross-hairs Projection lens 10X ( ) Optional : 20X, 0X, 100X Magnification Contour : ±0,1% or accuracy better Surface : ±0,1% or better Contour Surface Focusing Resolution Power supply Mass Light source : Halogen bulb (24V, 10W) Optical system : Telecentric Functions : Heat-absorbing filter, Cooling fan Light source : Halogen bulb (24V, 10W) Optical system : Vertical Functions : Adjustable condenser lens, Heat-absorbing filter, Cooling fan Manual 0,001 mm (using optional KA counter) V AC, 0/60Hz 140 kg D With optional evaluation unit QM-Data 200 L : Max. workpiece width W : Working distance D : Max. workpiece diameter KA Counter QM-Data 200 OPTOEYE

50 Standard accessories Description Lens 10X for Profile Projector PH-A Halogen bulb (24V, 10W) Measuring Projector PH-A14 Series Accessories/Dimensions mm Optional accessories Description D KA-Counter 2 axes Lens 0X for Profile Projector PH-A Lens 20X for Profile Projector PH-A Lens 100X for Profile Projector PH-A Standard scale 0 mm Reading scale 200 mm Green filter Centre support riser Rotary vice (Max. workpiece ø60 mm) V-block with clamp (Max. workpiece ø0 mm) Vertical holder Reading scale 300 mm Support for straight gear Support for flat gear Centre support Cleaner for optics Optoeye AAE671 Detector mounting plate for ø20 to ø30 mm D QM-Data 200 Arm mount type 12AAF182 Digital counter stand Model PH-A D XY stage [mm] 203 x 102 Measuring method Linear encoder XY stage table top size [mm] 407 x 13 Max stage loading [kg] 4 Footswitch: T Standard scale 0 mm: Reading scale 200 mm: QM-Data 200 *1 Arm mount type: D Optoeye-200: Detector mounting plate: 12AAE671 MCOSMOS 2D Cable D-Sub 9: Reading scale 300 mm: Overlay chart, 12 sheet set: 12AAM027 Green filter: Projection screen - 2D Data processor / counter - Edge detection 2-axes Counter Counter stand: *2 12AAF182 RS-232C Data output: 09CAB217D KA Counter (2-axes): * D Footswitch: Condenser lens for fiber optic : (2 pieces are required) Optional Centre support: Centre support riser: Stage pheripheral Projection lens PH-A14 Projection lens 10X : Rotary vice: Projection lens 20X: V-block with clamp: Vertical holder: Necessary option either chose *1 or *2 Standard accessory Projection lens 0X with condenser: Projection lens 100X with condenser: Support for straight gear: Support for flat gear:

51 Measuring Projector PH-31F Series 172 Measuring Projector PH-31F Due to the PH-31F s horizontal-beam, you can easily measure larger and heavier workpieces including toothed racks and punching tools. You can use the projector for a wide range of applications due to its generous 24 x 12 mm stage travel and 4 kg allowable stage loading. Specifications Projected image Erect Projector screen Effective diameter : 33 mm Screen material : Fine-ground glass Screen rotation : ±360, fine feed and clamp Angle display : Digital counter (LED) Resolution : 1' or 0,01 (switchable) Range : ±370 ABS/INC mode switching, Zero Set Reference lines : Cross-hairs Projection lens 10X ( ) Optional : X, 20X, 0X, 100X Magnification Contour : ±0,1% or accuracy better Surface : ±0,1% or better Contour Surface Focusing Resolution Power supply Mass Light source : Halogen bulb (24V, 10W) Optical system : Telecentric system Functions : 2-step (High/Low) brightness adjustment, Heatabsorbing filter, Cooling fan Light source : Halogen bulb (24V, 10W) Optical system : Vertical Functions : Adjustable condenser lens, 2-step (High/Low) brightness adjustment, Heat-absorbing filter, Cooling fan Manual 0,001 mm V AC, 0/60Hz 10 kg L : Max. workpiece width W : Working distance D : Max. workpiece diameter D Model PH-31F D XY stage [mm] 24 x 12 Measuring method Linear encoder Quick-release mechanism X axis XY stage table top size [mm] 40 x 146 Swiveling function ±10 Max stage loading [kg] 4 ( ) When using surface 498

52 Measuring Projector PH-31F Standard accessories Description Protective hood Projection lens 10X 1230 Halogen bulb (24V, 10W) 12BAA637 Halogen bulb (24V, 200W) Series Accessories/Dimensions Optional accessories Description Projection lens X with condenser Projection lens 20X with condenser Projection lens 0X with condenser Projection lens 100X with condenser Vertical surface unit Standard scale 0 mm Reading scale 200 mm Reading scale 300 mm Green filter Centre support Centre support riser Rotary vice (Max. workpiece ø60 mm) V-block with clamp (Max. workpiece ø0 mm) Vertical holder 12AAM027 Overlay chart set (12 sheets) ( 12AAM87 to 12AAM98) 12AAF182 Digital counter stand Cleaner for optics D KA-Counter 2 axes Optoeye AAE671 Detector mounting plate for ø20 to ø30 mm D QM-Data 200 Arm mount type Standard scale 0 mm: Reading scale 200 mm: Reading scale 300 mm: Overlay chart, 12 sheet set: 12AAM027 Green filter: Projection screen Footswitch: T QM-Data 200 *1 Arm mount type: D - 2D Data processor / counter - Edge detection Counter Optoeye-200: Detector mounting plate: 12AAE671 Counter stand: *2 12AAF182 MCOSMOS 2D Cable D-Sub 9: RS-232C Data output: 09CAB217D KA Counter (2-axes): * D Footswitch: Vertical surface : Optional KA Counter Centre support: Projection lens X with condenser: Centre support riser: Stage pheripheral Projection lens PH-31F Projection lens 10X : Rotary vice: Projection lens 20X: V-block with clamp: Necessary option either chose *1 or *2 Projection lens 0X with condenser: QM-Data 200 Vertical holder: Standard accessory Projection lens 100X with condenser: Support for straight gear: Support for flat gear:

53 Data Processing Unit QM-Data 200 Series 264 The Data Processing Unit QM 200 has been especially designed to process measurement data generated by a profile projector or measuring microscope. The QM-Data 200 offers you the following benefits: Measuring instructions, measuring values and calculation results for various operations are shown on the back-lit LCD in a clear, easy to understand style. You can also print measuring results, either on a small and convenient thermal printer (available as a special option) or on an ESC/P printer and continuous paper. By connecting an optional floppy disk drive newly created part programs, you can store and/or load measurement results as well as calculation results. Stand-mount type Mass [kg] Description 264-1D 2,9 Stand-mount type D 2,8 Arm-mount type D 2,9 Stand-mount type for Hyper MF / MF-U Intuitive panel design Arm-mount type Specifications Resolution 1 / 0,1 Dimensions 260 x 242 x 310 : Stand-mount type [mm] 318 x 13 x 27 : Arm-mount type Screen Colour graphic TFT LCD (320 x 240 dots, with background lighting) Program Part program creation, execution, functions editing Power supply 100/240V AC, 0/60 Hz Statisical Number of data, maximum value, processing minimum value, mean value, standard deviation, range, histogram Measuring of Geometric Elements Measurement result file output Data output Display language Maximum of 1000 elements, point, line, circle, distance, ellipse, rectangular hole, slotted hole, intersection and intersecting angle and point & angle, plus a number of functions for evaluation, e.g. perpendicularity and parallelism are provided. CSV format; MUX-10F format USB, RS-232C, Printer Japanese/English/German/French/ Italian/Spanish/Portuguese/Chech/ Traditional Chinese/Simplified Chinese/Korean/Turkish/Swedish/ Polish/Dutch/Hungarian Functions Mitutoyo's Al Function : The Al function (Al=Artificial Intelligence) renders choosing the element type before measuring obsolete. Point measurements are analysed by the QM-Data and the results for basic elements calculated, thus accelerating the measuring procedure. Data input Customized Operation : Macro functions and the creation of part programs speed up single and repetition measurements. Additionally macro commands and part programs as well as frequently used standard operations can be stored as user menus. USB, RS-232C, X/Y/Z-axis signal, Footswitch Optional accessories Description 12AAD033 Thermal printer (with connection cable) Printer paper for thermal printer I Cable for printer (2 m) T Footswitch 12AAA807D RS-232C cable (2m) Signal cable RS-232C D-SUB 2 to D-SUB 9 (2m) Clear function icons Coloured LCD display with backlight Guided measurements 00

54 Edge Detection Sensor OPTOEYE 200 Specifications Image detection Min. diameter Min. width Applicable Function Directivity : All directions 2 mm on the screen 1 mm on the screen Type : Surface/Contour Range : 30 to 2000 Lux on the screen Bright-Dark field difference : 20 Lux Automatic detection of feature edges for use in measurement Optional accessories Description 12AAE671 Detector mounting plate for ø20 to ø30 mm 12AAE672 Optoeye mounting plate for ø00 to ø600 mm screen Series 332 This edge sensor allows you to make accurate measurements whatever your skill level by automatically detecting edges used in measurement. The Optoeye 200 offers you the following benefits: Optoeye 200 reduces the effect of operator skill level on accuracy by automatically detecting edges used in measurement. PJ-H30: You can use the Optoeye edge detector on models PJ-H30A (requires adapter plate 12AAG983). The PJ-H30D models have a built-in edge detector. PV-110, PJ-31F and PJ-A14: You can use the Optoeye edge detector in conjunction with the QM-Data 200. PJ-A3000: You can use the Optoeye edge detector on models / / in conjunction with the QM-Data 200. When you are using the Optoeye all projector scales must be connected to QM-Data 200 directly and built-in counters can no longer be used (except PJ-H30D type) Description Edge detection sensor OPTOEYE

55 Accessories for Measuring Projectors Group 1 For measuring projectors These standard overlay charts increase the range of application and the efficiency of Mitutoyo profile projectors. This chart set offers you the following benefits: The charts are supplied in sizes ø20, 300, 340, 00 and 600 mm to suit the screens of Mitutoyo projectors. A large range of scales and profiles is provided that enables you to test workpiece features quickly and easily. You can test length, height, parallelism, angle, radius, taper, bore position, diameter, as well as all standardized thread and tooth profiles. All charts are made of a distortion-free special plastics compound and are provided with a protective coating. Combination chart Angle : Divisions at 10 and 30' intervals at 178mm/7" diameter increasing to 381mm/1" intervals at 279mm/11" diameter. Features : All purpose chart for checking diameters, angles, radii and linear divisions Diameter [mm] Additional Specifications Grid divisions 10X : 0,1 mm 20X : 0,0 mm 0X : 0,02 mm 100X : 0,01 mm Combination chart Grid/protractor chart Angle : 1 increments Features : Ideal for checking diameters, concentricity of diameters, radii, angles and cams. Diameter [mm] Grid/protractor chart Radius/protractor chart Angle : Divisions at 1 and 30' intervals at 178mm/7" diameter increasing to 381mm/1" intervals at 279mm/11" diameter. Features : Ideal for checking diameters, concentricity of diameters, radii, angles, radii and cams Diameter [mm] Radius/protractor chart 02

56 Additional Specifications Grid divisions 10X : 0,1 mm 20X : 0,0 mm 0X : 0,02 mm 100X : 0,01 mm Accessories for Measuring Projectors Group 1 For measuring projectors These standard overlay charts increase the range of application and the efficiency of Mitutoyo profile projectors. This chart set offers you the following benefits: The charts are supplied in sizes ø20, 300, 340, 00 and 600 mm to suit the screens of Mitutoyo projectors. A large range of scales and profiles is provided that enables you to test workpiece features quickly and easily. You can test length, height, parallelism, angle, radius, taper, bore position, diameter, as well as all standardized thread and tooth profiles. All charts are made of a distortion-free special plastics compound and are provided with a protective coating. Involute gear teeth Involute gear teeth Diameter [mm] ISO Metric threads Diameter [mm] ISO Metric threads Protractor chart Protractor chart Angle : Divisions at 1 and 30' intervals at 178mm/7" diameter increasing to 381mm/1' intervals at 279mm/11" diameter. Features : Dedicated chart especially designed for checking angles with exceptional clarity. Suitable for use at any magnification. Diameter [mm] Radius chart Radius chart Features : Dedicated chart especially designed for checking radii, diameters and concentricity with exceptional clarity. Diameter [mm]

57 Accessories for Measuring Projectors Group 2 - Makes inspection of projected images an easy process. Metric Description Concentric circles 1 mm pitch Concentric circles at 1 mm pitch with radial index 1 increments Crossed lines with 0, mm pitch Crossed lines with 1 mm graduation and concentric circles mm pitch Grid chart (10 x 10 mm) Grid chart (1 mm pitch) Horizontal for 20X, vertical for 0X with 1 mm graduations Horizontal lines 1 mm pitch Metric threads 0,07-0,22 mm, 100X involute gear teeth : 20 MOD 0,2-1, 14, MOD 0,2-1 Metric threads 0,2-2 mm, unified threads TPI 20X Whitworth threads TPI 20X Radial index 1 increments Radial index 1 increments (upper) concentric circle 1 mm pitch (lower) ø 300 mm 12AAM89 12AAM96 12AAM92 12AAM88 12AAM91 12AAM93 12AAM90 12AAM9 12AAM98 12AAM97 12AAM94 12AAM87 Optional accessories 12AAM027 12AAM87 Description Overlay chart set (12 sheets) ( 12AAM87 to 12AAM98) 12AAM88 12AAM89 12AAM90 12AAM91 12AAM92 12AAM93 12AAM94 12AAM9 12AAM96 12AAM97 12AAM98 04

58 Accessories for Measuring Projectors Workpiece Fixtures For Profile Projectors and Measuring Microscopes Centre Support Max. workpiece height Mass [mm] [kg] , Centre Support Riser Max. workpiece height Mass [mm] [kg] , Holder with Clamp Max. workpiece height Mass [mm] [kg] , Rotary Tables Effective glass dia. [mm] Angular resolution Fine feed Mass [kg] , Available 2, , Available, Available 6, Rotary Vice Width of jaws Max. workpiece height Mass Rotary range Angle graduations [mm] [mm] [kg] , Swivel Centre Support Max workpiece dia. [mm] Swivel range Max. workpiece length [mm] (4 ) when swiveled (6) when swiveled 10 Mass [kg] ± ,4 ± , V-Block with Clamp Max workpiece dia. [mm] Width of block Mass [mm] [kg] , , Vertical Holder Mass [kg] ,