Carbon fibre. multistair. 0% corrosion 100% green 100% lightweight. ...the noblest lightweight in its class. ...original only by

Transcription

1 Carbon fibre 0% corrosion 100% green 100% lightweight multistair...the noblest lightweight in its class. protected system by multiplex-gmbh Germany...original only by

2 100% carbon-fibre lightweight for heavyweight Quadriga platform The top platform can either be square or round. On request usable from either side. Rotunda adjustable platform The round adjustable platform ensures highest possible flexibility on the pier. Access platform The lower access platform comes with a grating, allowing waves to flush through. Quay rollers With the stairs resting ashore the quay rollers provide sufficient distance to the ground and increase the mobility of the stair. The rollers are rotatable by

3 multistair craftsmanship of the highest standard multistairs are manufactured according to the guidelines of the "Germanischer Lloyd". They are all hand crafted in boat builder style to meet individual requirements. Only this working principle guarantees our high quality demands. The multistair The multistair, ship-to-shore stairs, with 4mm teak covering on the carbon fibre structure, individually adapted to the corresponding sailing or motor yacht. The use of carbon fibre and stainless steel ensures 100% corrosion resistance. Whether for access from the side or the stern directly into the cockpit. It can be swung from horizontal zero degree position to vertical 90 degree, whereby all steps down to the entry platform will automatically align horizontally to the sea level. Even the handrail will perfectly adapt to the corresponding inclination. Telescopic struts ensure optimal distance to the hull to avoid damage. They also ensure safe stability of the multistair. Since it only consists of three light-weight elements, it can be easily mounted and the length, width and number of steps can be freely chosen. Steps Width of 400, 500 and 600mm are available. The multistair is available with up to 15 steps in length, plus platforms. The walking surfaces are made of a highquality, 4mm teak covering. Inclination of steps The steps automatically adjust their horizontal inclination. Alignment and distance The telescopic struts can be individually adjusted by a Quickpin. These are required to align the upper platform and to keep the lateral distance to the hull of the yacht. Round adjustable platform The round adjustable platform ensures highest possible flexibility on the pier. 3

4 the best adjustment available The exclusive appearance The possibility of fitting the multistair with an illumination is a special highlight. Due to the economical LED-technology, this light can be connected to the on-board power supply without any problems. The cable is well hidden inside the structure. Available for 12 V and 24 V Lifting arm With the lifting arm the multistair is adjusted and held in place via ropes, thus ensuring secure fastening. The height can be infinitely adjusted from horizontal 0 degree to vertical 60 degree. Access platform Lower platform with grating. 4

5 multistair Board connection Quadriga The Quadriga stair is mounted on the vessel by means of Quickpins fittings supplied by multiplex. Painted lifeline stanchions Its also possible to get the carbon lifeline stanchions perfectly matching to the colour of the stair. Floating lightness The multistair is mounted on to the vessel, freely suspended and held in position by the lifting arm. The inclination can manually be infinitely adjusted. The deck is accessed via an entry platform. It consists of three main carbon fibre light-weight elements, suitable for easy and space saving stowage. It features easy assembly and disassembly with just a flick of the wrist. 5

6 6

7 multistair Swivelability Rotunda With its round platform Rotunda the multistair can be swivelled by up to 180. Support arm An adjustment foot integrated in the support arm aligns the platform parallel to the deck of the boat. The support arm can be easily disassembled for stowage. Boarding without detours The rotatable and also light multistair made of carbon fibre features high flexibility on the pier. Apart from its characteristic of being able to swing down from 0 to 90, it can also be rotated by 180. This design offers an exclusive benefit when exiting the boat: Confined space on the pier no longer is a problem and you can directly walk ashore. The multistair Rotunda moves with two quay rollers on the pier and thereby perfectly adapts to the free board. 7

8 the best individual style available The exclusive appearance The possibility of fitting the multistair with an illumination is a special highlight. Due to the economical LED-technology, this light can be connected to the on-board power supply without any problems. The cable is well hidden inside the structure. Available for 12 V and 24 V Teak optic without weight increase with help of the of the water transfer printing process it is also possible to apply the teak optic on the surface of the bathing ladder. Afterwards 3 coats of lacquer are applied. Hand rail made of teak On request we also offer extrabright lacquered teak handrails with V4A stainless steel facings. They offer an even higher comfort when using the stairs. 8

9 multistair Hand rail stanchions made of V4A Highquality corrosion proof V4A stainless steel handrail stanchions. Carbon fibre hand rail stanchions For additional weight reduction or simply for optical reasons we offer carbon fibre handrail stanchions. 9

10 What we need in order to create a supply for you. Each multistair is custom-built. We manufacture each multistair according to the individual requirements of the customer. The products shown here can be combined with each other or changed in their dimensions as desired. Freely selectable in length, width and number of steps, also with respect to paint finish and coating of walking surfaces. You decide, together we will find the optimal solution for your requirements. 1. Which platform do you prefer? 2. Which step width do you prefer? 400, 500, or 600mm are available 3. Which max. distance in height is your stair supposed to bridge? Step 1 Your choice of platform Step 2 Your choice of width of your steps. Your choice of required distance. Step 3 Your choice entry Rotunda, 180 Last step: with 360 Rollers Quadriga 3 side Access platform: Lower platform with grating. 10

11 multistair Details for your personal multistair! Standard surfaces: colour of your choice Optional: walking-surface teak Option: ladderbody teak covered optics Optional: illumination left or right side or bilaterally Available for 12 V and 24 V Standard lifeline stanchions: 1 carbon, black or white ropes Optional: 2 v4a, black or white ropes 3 teak handrails Optional: storage bag in blue, grey or any other colour of your choice Information from approx. 1700mm to 4200mm 280mm 0 Decline Up to 15 steps (= 4200mm) with a step width of 400mm 500mm 600mm 45 Decline 90 Decline Depending of the numbers of steps you can choose an individual range to the quay. 11

12 Carbon fibre... tailor made composite solutions for luxury yachts 0% corrosion 100% green 100% lightweight 1 sun awning system: The easy way to install temporary sun awning system to give your yacht more shaded living space. multiguard: The special new dimension of making your gangway or other areas safe multiflap system: The multiflap gangway is compatible with all individual needs and requirements and available in various designs. multifender system: The freely configurable, lightweight shock absorber system. multistair system: The multistair side boarding ladder is available in 2 basic types, to meet every individual requirement. multiladder: The multilight folding bathing ladder is available in different heights and widths; the multiflipper diving ladder is easily attached for ease of boarding. multiplex gmbh Zur Westpier 3 D Bremen Phone: +49 (0) Fax: +49 (0) contact@multiplexgmbh.com