YEARS hrs L HL Signage Backlighting

Transcription

1 OptiKa Signage Backlighting YEARS hrs L70 The widest optics for the most brilliant modules make installation a breeze and brightly uniform results 90 lumens per light point Robust and reliable Depth range: 80 to 00 mm MacAdam ellipse to achieve Consistent light different Whites HL 1

2 FEATURES & BENEFITS Optimised 170º lens for backlighting surfaces or letters with fewer modules but bright results. Saves on installation time and labor Uniform brilliance from 80 to 00mm ( to 11 ) Superior consistency always: macadams ellipse to reproduce the same white time after time Flexible chains with 0, 0 or 0 modules cuttable anywhere IP67 rated for outdoor applications Durability: Robust body made with innovative thermally conductive plastic and PC lens, both UV rated Energy savings: Up to 10 lm/w DC 1V All modules are equipped with regulation components (111V) to ensure that any fluctuation of the output voltage from the converter would not affect the lumen output, increase of temperature or lifetime of the module M VHB 90 adhesivetape and screwhole for mechanical fixation 100% aging test Wide operating temperature from 0 to 0 C NORMS & CERTIFICATES EN01:01 EN617:009 EN61000:01 EN61000:01 EN601:008 A1:01 IEC61:01 EN671:008 LIFETIME & WARRANTY Warranty: years Lifetime: hours at L70 TECHNICAL DATA Code Designation Color ColorTemp / wavelength Voltage (V) Typical power/ mod (W) Lumen output (lm/mod) Effi ciency (Lm/W) Modules / chain Modules max in series Module distance axe to axe (mm / in) 0000 OptiKa 90 HL1 WS 0mod 0mm 1W 1V IP67 WS K 1 0, ± / OptiKa 90 HL1 OW 0mod 0mm 1W 1V IP67 OW K 1 0, ± / OptiKa 90 HL1 WDL 0mod 0mm 1W 1V IP67 WDL K 1 0, ± / OptiKa 90 HL1 NW 0mod 0mm 1W 1V IP67 NW 800K 1 0, ± / OptiKa 90 HL1 WW 0mod 0mm 1W 1V IP67 WW K 1 0, ± / OptiKa 180 HL WS 0mod 90mm W 1V IP67 WS K 1 1, ± / OptiKa 180 HL OW 0mod 90mm W 1V IP67 OW K 1 1, ± / OptiKa 180 HL WDL 0mod 90mm W 1V IP67 WDL K 1 1, ± / OptiKa 180 HL NW 0mod 90mm W 1V IP67 NW 800K 1 1, ± / OptiKa 180 HL WW 0mod 90mm W 1V IP67 WW K 1 1, ± / OptiKa 70 HL WS 0mod 0mm W 1V IP67 WS K 1, ± / OptiKa 70 HL OW 0mod 0mm W 1V IP67 OW K 1, ± / OptiKa 70 HL WDL 0mod 0mm W 1V IP67 WDL K 1, ± / OptiKa 70 HL NW 0mod 0mm W 1V IP67 NW 800K 1, ± / OptiKa 70 HL WW 0mod 0mm W 1V IP67 WW K 1, ± / 1.6 Tolerance range for optical and electrical data: ±1 %. V16

3 DIMENSIONS OptiKa 90 HL1 9, / 1. 0 / 8.66 OptiKa 180 HL 7, /.8 90 / 11. OptiKa 70 HL 10. / 0 / 1.6 WIRING DIAGRAM Max 0 modules for OptiKa 90 HL1 Max 0 modules for OptiKa 180 HL Max 0 modules for OptiKa 70 HL L N 1V Converter * Can be cut between any modules V16

4 APPLICATION LIGHT DISTRIBUTION RECOMMENDED MODULES PER TYPE OF SIGNAGE TYPE BLOC LED (0mm) <0mm < in Depth of letter or box to be illuminated (mm) 0 to 80mm to in OptiKa 10/0/0 HL1 * * * * * * * * * 80 to 10mm to,7in 10 to 10mm,7 to 6 in >10mm >6 in OptiKa /70 HL * * * * * * * * * * OptiKa 100 HL * * * * * * * * OptiKa 90 HL1 * * * * * * * * OptiKa 180 HL * * * * * * * * OptiKa 70 HL * * * * * * * * Units: cd c0/180 c90/70 * To be tested ** Possible under conditions *** Optimum INGRESS PROTECTION IP67 Product is an inbuilt LED module designed to be used Indoors or Outdoors. The specified environmental protection of the LED module enclosure means that: It is totally protected against the ingression of dust, and protected against the effect of water immersion up to 1 mtr deep. The certification requires products to pass a test 0 minutes long at 1 mtr. depth. After 0 minutes of submersion product could start to be affected or damaged. Make sure the application (sign, box, e.) where the LED modules are installed into, has proper drain holes for water to exit so that LED modules and any other electronic components are not submerged exceeding the IP67 certification limits. THERMAL BEHAVIOUR The temperature limits indicated below are expressed in ºC, at full load, after hrs of operation conditions, with natural convection: Operation temperature Ta 0 to 0 C Storage temperature Ts 0 to 8 C Max. temperature point OptiKa 90 HL1 Tc 9 C OptiKa HL Tc 88 C The life of the module will decrease when the maximum temperature limits are exceeded. If LEDs are operated for a continuous extended time at temperatures that exceed the maximum limits, the modules can fail. Our Warranty will be void when LED modules are operated exceeding the maximum values indicated. INSTALLATION Always connect the LED modules to the power supply while it is OFF. Only then you can connect the power supply to electricity and turn it ON. Respect the maximum number of modules in a row. Check compatibility between LED and driver voltage. Install LED on a clean work station connected to the earth. All LEDs are sensitive to static electricity (ESD). Limit the cable length between LED and power supply (voltage drop). Do not make direct pressure on LED chip, this could damage the internal connection. Secure LED module lines with mechanical fixation (screws, glue...) in addition to the adhesive tape. IDENTIFICATION You can found the following production date code at the back of the module Production s Week Production s year 016 V16

5 PACKAGING Type SIZE LxWxH (cm) SIZE LxWxH (ft) Weight (Kg) Weight (lb) Nb of Pcs / box OptiKa 90 HL1 0x0x 1,x1x1,1 11, 1 CARTON OptiKa 180 HL 0x0x 1,x1x1,1 10,,1 16 OptiKa 70 HL 0x0x 1,x1x1,1 1 1 V16