critical supplies Consumables and Accessories 2002 Catalog for your analytical instrument Atomic Absorption Inductively Coupled Plasma OES and MS

Transcription

1 Inorganic Analysis Chromatography Molecular Spectroscopy Thermal Analysis Informatics Consumables and Accessories 2002 Catalog critical supplies for your analytical instrument Atomic Absorption Inductively Coupled Plasma OES and MS Liquid Chromatography Gas Chromatography UV Visible, Fluorescence, and Polarimetry Thermal and Elemental Analysis Infrared Spectroscopy

2 Ordering Information How to Order US IN THE U.S. IN CANADA RETURN GOODS POLICY Order Online Place your order online at essentials. Online ordering currently is available in the U.S., Puerto Rico, and Canada. Call Toll Free Monday through Friday from 8:00 a.m. to 7:00 p.m. EST. Fax Us Your Order Fax your company Purchase Order to Us Your Order Visit our Web site at or us at Mail Us Your Order Mail your company Purchase Order to: PerkinElmer Instruments 710 Bridgeport Avenue M/S 270 Shelton, CT Visa, MasterCard, and American Express are accepted. Order Online Place your order online at essentials. Online ordering currently is available in the U.S., Puerto Rico, and Canada. Call Toll Free Monday through Friday from 8:30 a.m. to 5:00 p.m. EST. Fax Us Your Order Fax your company Purchase Order to Us Your Order Visit our Web site at or us at Mail Us Your Order Mail your company Purchase Order to: PerkinElmer Canada 501 Rowntree Dairy Road Unit 6 Woodbridge, ON Canada L4L 8H1 Before returning any item to PerkinElmer, please obtain a Return Authorization Number from a customer service representative. Call toll free in the U.S. or in Canada. Please have the following information ready: 1. Our Order Number or your Purchase Order Number. 2. The PerkinElmer part numbers of the items that you wish to return. 3. Reason for return. Our customer service representative will provide you with an RMA number and the return address.we cannot accept any returns without an RMA number. TECHNICAL SUPPORT Call toll free in the U.S. or in Canada. 8:30 a.m. to 5:00 p.m. EST. OUTSIDE THE U.S. & CANADA Contact your local sales office. A full list of Worldwide Support numbers follows the Table of Contents. Chiller for ICP/ICP-MS page ICP-5 Deuterium Lamp page LC-13 NewGuard Column pages LC-32 and LC-33 NCI 901/902 Interfaces page GC-46 THGA Graphite Tubes page 0

3 Canada Table of Contents SECTION PAGE AA Atomic Absorption ICP Inductively Coupled Plasma OES and MS LC Liquid Chromatography GC Gas Chromatography UV UV Visible, Fluorescence, and Polarimetry AA-1 to 1 ICP-1 to ICP-32 LC-1 to LC-49 GC-1 to GC-98 UV-1 to UV-19 FLR-20 to FLR-28 PLR-29 Lumina Hollow Cathode Lamps pages to Headspace Septa page GC-3 TEA Deuterium Lamp page UV-19 Thermal and Elemental Analysis TEA-1 to TEA-44 IR Infrared Spectroscopy IR-1 to IR-20 Index IND-1 to IND-22 Aluminum Sample Pans and Covers page TEA-4 Terms and Conditions TC-1 to TC-4 IR Cells and Windows page

4 Worldwide Support US Austria Tel: Fax: Australia Melbourne Tel: Fax: Argentina Tel: Fax: Belgium Tel: Fax: Bolivia Tel: Fax: Brazil Tel: Fax: Canada Tel: Fax: CIS Tel: Fax: Chile Tel: Fax: China Beijing Tel: Fax: Columbia Tel: Fax: Costa Rica Tel: Fax: Czech Rep. Tel: Fax: Denmark Tel: Fax: Ecuador Tel: Fax: Egypt Tel: Fax: El Salvador Tel: Fax: Finland Tel: Fax: France Tel: Fax: Germany Tel: Fax: Guatemala Tel: Fax: Honduras Tel: Fax: Hong Kong Tel: Fax: Hungary Tel: Fax: India Tel: Fax: Indonesia Tel: Fax: Italy Tel: Fax: Japan Yokohama Tel: Fax: Japan Osaka Tel: Fax: Korea Tel: Fax: Luxembourg Tel: Fax: Malaysia Tel: Fax: Mexico Tel: Fax: The Netherlands Tel: Fax: Nicaragua Tel: Fax: Norway Tel: Fax: Panama Tel: Fax: Poland Tel: Fax: Philippines Tel: Fax: Singapore Tel: Fax: South Africa Tel: Fax: Spain Tel: Fax: Sweden Tel: Fax: Switzerland Tel: Fax: Taiwan Tel: Fax: Thailand Tel: Fax: United Kingdom Tel: Fax: United States Tel: Fax:

5 e-ssential supplies for UV Visible,Fluorescence, and Polarimetry Companies all over the world solve their analytical problems with PerkinElmer molecular spectroscopy systems. Our UV/Vis, Luminescence, and Polarimetry systems are a reliable, easy way to comply with complex regulations, including 21 CFR Part 11. We offer a complete selection of UV/Vis solutions from highperformance systems to ones for routine applications. The Lambda Series of UV/Visible spectrometers, based on the proven technology and industry-leading performance of the established Lambda platform, are quality systems providing you dependable results. Lambda 45

6 Top-selling e-ssentials for UV Visible,Fluorescence,and Polarimetry Deuterium and Tungsten Lamps For optimum instrument performance, always use original replacement lamps from PerkinElmer! Our extensive quality control and inspection process demands the very best quality sources. For many of our instruments, the lamps are mounted, prealigned, and prefocused, guaranteeing top performance and maximum stability. Deuterium Lamp B UV-19 Tungsten Lamp B Macro Rectangular Cell, 10 mm Quartz with PTFE Lid PerkinElmer standard cells provide top optical performance, with high cell transmission and accurate pathlength. Choosing only high-quality PerkinElmer cells maximizes the accuracy and sensitivity of your optical instrument. See pages UV-1 through UV-4 for our full selection of Special Optical Glass, Quartz SUPRASIL and NIR Quartz SUPRASIL Cells for Spectroscopy. B Well Plate Reader For measuring fluorescence or phosphorescence in 6-, 12-, 24-, 48-, or 96-well plates or for luminescence microdensitometry of TLC plates and electrophoresis gels. Controlled by the computer. Silica excitation fiber, glass emission fiber for measurement above 260 nm excitation, 340 nm emission. Includes one pack of White Microplates (L ). L FLR-25 Xenon Source Lamp This reliable source produces very little ozone or heat but provides remarkable sensitivity due to its peak intensity exceeding 1 KW. To maintain the original stability and sensitivity of your LS Series instrument, use only PerkinElmer replacement lamps. See page FLR-23 for our complete selection of Xenon Source Lamps for Luminescence Spectrometers. L FLR-23 Photometric and Wavelength Accuracy Reference Material Set UV-1 to UV-4 PerkinElmer reference materials speed calibration verification of UV/Vis and UV/Vis/NIR Spectrometers, providing laboratory managers with the evidence they need to pass the strictest quality audit. Verifies the ordinate and abscissa accuracy of UV/Vis and UV/Vis/NIR Spectrometers. See page UV-9 for a complete selection of Calibration Reference Materials. B UV-9 QUICK-FIND INDEX Standard Cells for Spectroscopy Cell Holders Cell Changers Temperature-controlled Accessories Calibration Reference Materials Lambda 800/900 Spectrometers, Software, and Sippers Lambda 800/900 Spectrometers, Reflectance Accessories Lambda 800/900 Spectrometers, Accessories Lambda 25/35/45/10/20/40 Spectrometers, Software, and Sippers Lambda 25/35/45/10/20/40 Spectrometers, Accessories Standard Fluorescence Cells for Fluorimetry Luminescence Sample Blocks and Source Lamps LS 55 FLR Software LS 55/50B Sampling Accessories LS-45 Accessories Polarimetry Source Lamps, Cells, and Supplies UV-1 UV-6 UV-7 UV-8 UV-9 UV-11 UV-12 UV-16 UV-17 UV-18 FLR-20 FLR-23 FLR-24 FLR-25 FLR-28 PLR-29

7 Canada Macro with PTFE Lid Spectroscopy Cells Standard Cells for Spectroscopy UV-1 Light Path Outside Dim. Inside Width Base Thickn. Cell Material Qty. mm H x W x D mm mm mm Volume B Special Optical Glass 2 1 * 45 x 12.5 x µl B x 12.5 x ml B x 12.5 x ml B x 12.5 x ml B x 12.5 x ml B x 12.5 x ml B Quartz SUPRASIL 2 1 * 45 x 12.5 x µl B x 12.5 x ml B x 12.5 x ml B x 12.5 x ml B x 12.5 x ml B x 12.5 x ml B NIR Quartz SUPRASIL * 45 x 12.5 x µl B x 12.5 x ml B x 12.5 x ml B x 12.5 x ml B x 12.5 x ml B x 12.5 x ml B Optical Glass x 12.5 x ml nm without lid Special Optical Glass Macro with PTFE Lid, 10 mm (B ) *Glass lid Note: all cells contain two clear windows. Macro with PTFE Stopper Light Path Outside Dim. Inside Width Base Thickn. Cell Material Qty. mm H x W x D mm mm mm Volume B Special Optical Glass x 12.5 x µl B x 12.5 x ml B x 12.5 x ml B x 12.5 x ml B Quartz SUPRASIL x 12.5 x µl B x 12.5 x ml B x 12.5 x ml B x 12.5 x ml B x 12.5 x ml B x 12.5 x ml B NIR Quartz SUPRASIL x 12.5 x µl B x 12.5 x ml B x 12.5 x ml B x 12.5 x ml B x 12.5 x ml B x 12.5 x ml Note: all cells contain two clear windows. NIR Quartz Macro with PTFE Stopper, 10 mm (B )

8 UV-2 Spectroscopy Cells Standard Cells for Spectroscopy Micro with PTFE Lid or with PTFE Stopper US Light Path Outside Dim. Inside Width Base Thickn. Cell Material Qty. mm H x W x D mm mm mm Volume WITH PTFE LID B Special Optical Glass x 12.5 x µl B Quartz SUPRASIL x 12.5 x µl WITH PTFE STOPPER B Special Optical Glass x 12.5 x µl B Quartz SUPRASIL x 12.5 x µl B NIR Quartz SUPRASIL x 12.5 x µl Black versions Ultra-micro with PTFE Lid Light Path Center Height Outside Dim. Aperture Chamber Vol. Filling Vol. Material Qty. mm mm H x W x D mm mm µl µl B Quartz SUPRASIL x 12.5 x x Note: all cells contain two clear windows. Ultra-micro with Pipette Tips Light Path Center Height Outside Dim. Aperture Chamber Vol. Filling Vol. Material Qty. mm mm H x W x D mm mm µl µl B Quartz SUPRASIL x 12.5 x x B x 12.5 x x B Quartz SUPRASIL x 12.5 x 12.5 Ø B x 12.5 x 12.5 Ø Note: all cells contain two clear windows. Quartz SUPRASIL Micro with PTFE Lid, 10 mm (B ) Quartz SUPRASIL Micro with PTFE Stopper, 10 mm (B ) Quartz SUPRASIL Ultra-micro with Pipette Tips, 0.1 mm (B )

9 Canada Spectroscopy Cells Standard Cells for Photometry/Spectroscopy UV-3 Semi-micro with PTFE Lid Quartz SUPRASIL Semi-micro with PTFE Lid, 10 mm (B ) Light Path Outside Dim. Inside Width Base Thickn. Cell Material Qty. mm H x W x D mm mm mm Volume B Special Optical Glass x 12.5 x ml B Quartz SUPRASIL x 12.5 x ml B NIR Quartz SUPRASIL x 12.5 x ml BLACK VERSIONS B Special Optical Glass x 12.5 x µl B x 12.5 x ml B Quartz SUPRASIL x 12.5 x µl B x 12.5 x ml B NIR Quartz SUPRASIL x 12.5 x µl B x 12.5 x ml Semi-micro with PTFE Stopper Quartz SUPRASIL Semi-micro with PTFE Stopper, 10 mm (B ) Light Path Outside Dim. Inside Width Base Thickn. Cell Material Qty. mm H x W x D mm mm mm Volume B Special Optical Glass x 12.5 x ml B Quartz SUPRASIL x 12.5 x ml B NIR Quartz SUPRASIL x 12.5 x ml BLACK VERSIONS B Special Optical Glass x 12.5 x µl B Quartz SUPRASIL x 12.5 x ml B NIR Quartz SUPRASIL x 12.5 x µl B x 12.5 x ml Note: all cells contain two clear windows.

10 UV-4 Spectroscopy Cells Flow-through and Cylindrical Cells for Spectroscopy Flow-through Cells Semi-micro/Ultra-micro with In- and Outlet Tubes US Light Path Center Height Outside Dim. Aperture Cell Material Qty. mm mm H x W x D mm mm Volume B Quartz SUPRASIL x 12.5 x x µl B Quartz SUPRASIL x 12.5 x x µl B Quartz SUPRASIL x 12.5 x x µl B Quartz SUPRASIL x 12.5 x x µl B Quartz SUPRASIL x 12.5 x 12.5 Ø 3 80 µl B x 12.5 x 52.5 Ø µl B Quartz SUPRASIL x 12.5 x 12.5 Ø 2 30 µl B Quartz SUPRASIL (FIAS) x 12.5 x 12.5 Ø µl B x 12.5 x 12.5 Ø 1 8 µl Compact with two Screw Connectors M 6 x 1 and FEP Tubing o.d. 1.9 mm, i.d. 1.1 mm 500 mm long Note: all cells contain two clear windows. Cylindrical Cells Macro with PTFE Stopper NIR Quartz SUPRASIL Cylindrical Cells Macro with PTFE Stopper, 10 mm (B ) Light Outside Inside Outside Cell Material Qty. Path mm Dia. mm Dia. mm Depth mm Volume Remarks B Special Optical Glass ml neck Ø 6 mm taper 1:10 B ml neck NS 7 B ml 2 necks NS 7 B ml 2 necks NS 7 B Quartz SUPRASIL ml neck Ø 6 mm taper 1:10 B ml neck NS 7 B ml 2 necks NS 7 B ml 2 necks NS 7 B NIR Quartz SUPRASIL ml neck Ø 6 mm taper 1:10 B ml neck NS 7 B ml 2 necks NS 7 B ml 2 necks NS 7

11 Canada Lids and Stoppers Spectroscopy Cells Cell Accessories UV-5 Light Path Description mm Glass covering plate 1 B PTFE fitted lid 5 B PTFE fitted lid 10 B PTFE fitted lid 20 B PTFE fitted lid 50 B Glass fitted lid 100 B PTFE stopper with NS 7 fitting PTFE stopper with fitting Ø 6, taper 1:10 Replacement Tubing Description FEP-Replacement tubing with one short screw fitting, 500 mm long FEP-Replacement tubing with one long screw fitting, 500 mm long Sipper tubing to cuvette (in) Sipper tubing to cuvette (out) B B B B B B B B

12 Cell Holders UV US To extend the range of samples you can analyze, we offer a wide range of sample cell holders. Use them with the precision far-uv and special optical glass cells offered on pages UV-1 through UV-5. Cylindrical Long-path Cell Holder (C ) Cylindrical Long-path Cell Holder Accommodates cells with outside diameters from 22 mm to 30 mm Versatile! Accepts cells with pathlengths up to 100 mm Spring loaded clamping arms provide precise, reproducible fit Easy to adjust! Cuvette Stand Holds 16 cuvettes up to 10 mm rectangular Safe, economical way to contain cuvettes while awaiting use Test Tube Holder Accommodates test tubes from 11 mm to 17 mm diameter. Test Tube Holder (B ) Variable Angle Sample Holder Standard Cell Holder Accommodates a Large Selection of Rectangular Cells up to 10 mm Pathlength This is the same cell holder which is provided as standard equipment with your PerkinElmer Lambda Series instrument. A lifter (included) makes short cell removal easy. Accommodates a large selection of rectangular cells up to 10 mm pathlength Adjustable both vertically and horizontally Standard equipment with all PerkinElmer Lambda Series instruments Standard Cell Holder (B ) Solid Sample Holder Variable Angle Sample Holder (B ) Solid Sample Holder (B ) Rectangular Long-path Cell Holder (B ) Rectangular Long-path Cell Holder Accepts cells with pathlengths from 10 mm to 100 mm Easy to install! Same as standard cell holder Adjustable Precise fit, maximum reproducibility Description Standard Cell Holder for Lambda 2, 3, 6, 9, 11, 12, 14, 16, 18, 19, 900 and Bio Cylindrical Long-path Cell Holder Rectangular Long-path Cell Holder Test Tube Holder for diameters between 11 and 17 mm Cuvette Stand 16 Positions Water Thermostatted Cell Holder Variable Angle Solid Sample Holder Solid Sample Holder B C B B B B B B

13 Cell Changers Canada UV-7 Automatic Cell Changers Cell Programmer (9 + 9) For Lambda 800/900 Spectrometers. The accessory includes two sample trays with nine positions each. The following sample setup is possible: one reference cell and eight sample cells on either tray or nine cells on the sample tray and nine cells on the reference tray. For temperature control B accessory PCB required. Temperature range 15 C-45 C. B Cell Programmer (9 + 9) (B ) Linear Cell Programmer For Lambda 900 UV/Vis/NIR Spectrometer. Requires set of cell holders of choice, either 2x B Long Pathlength 5-Cell Holder, or 2x B Cell Holder, Water Thermostattable. B Linear Cell Programmer (B ) Linear Transporter and Gel-scanner for Lambda 800/900 Complete gel-, film-, and filter-scanner accessory for Lambda 800/900. Allows measurement of 100 mm gel cuvettes or film and glass samples in continuous or random mode. B Linear Transporter and Gel-scanner (B ) Automatic Linear Transport for Lambda 25/35/45/10/20/40/Bio Basic linear transport unit. Can be combined with Water Thermostattable 8-Cell Holders (B ), Long Pathlength 5-Cell Holders (B ), Research Peltier System (L ). For reference position, Reference Kit (B ) and 5- or 8-Cell Holder recommended (but not included). Single Cell Reference Holder (B ) can be used alternatively. B Cell Changer Automatic water thermostattable automatic linear cell changer for eight samples and one reference. Includes: B Linear Transport, B Cell Holder, Water Thermostattable and B Water Thermostattable Reference Cell Holder. Controlled through Lambda 25/35/45/10/20/40/Bio instrument. No accessory PCB required. N Cell Changer Automatic water thermostattable automatic linear cell changer for eight samples and eight references. Consisting of B Linear Transport, B Reference Kit and 2 x B Cell Holders. Controlled through Lambda 25/35/45/10/20/40/Bio instrument. No accessory PCB required. N Cell Changer Automatic linear 5+5 cell changer for long pathlength cells up to 50 mm. Includes: B Linear Transport, B , Reference Kit, and 2 x B Long Pathlength 5-Cell Holder. Controlled through Lambda 25/35/ 45/10/20/40/Bio instrument. No accessory PCB required. N Reference Kit For B Linear Transport. For reference position to be used with B Cell Holder Water Thermostattable or B Long Pathlength 5-Cell Holder. B Gel-scanner Linear Transport for Gels and Glasses Complete gel-scanner accessory. Allows measurement of 100 mm gel cuvettes or glass samples up to 100 mm pathlength in continuous or random access mode. Controlled through Lambda 25/35/45/10/20/40/Bio instrument. No accessory PCB required. For gel measurement B gel cell required (but not included). B Gel Cell, Glass For gel measurements with B Gel-scanner Linear Transport. Dimensions are 6 mm pathlength by 100 mm width by 10 mm height. CP Cell Changer System Includes cell changer and one carousel each for glass/quartz and plastic cuvettes. Accessory PCB L required for Lambda 25/35/45, or PCB B required for Lambda 10/20/40/Bio, but not included. B Manual Cell Changer Manual Cell Changer for Lambda 25/35/45/10/20/40/Bio Base unit to be used with cell holder of choice. Includes B accessory cover. Requires (but does not include) B Long Pathlength 5-Cell Holder, or B Cell Holder, Water Thermostattable. B Cell Holders Long Pathlength 5-Cell Holder For B Linear Transport or B for Lambda 800/900 in sample or reference position. Accommodates five cells of up to 50 mm pathlength. B Cell Holder, Water Thermostattable For B Linear Transport for Lambda 25/35/45/ 10/20/40/Bio and B Linear Cell Programmer for Lambda 800/900 for sample or reference position for up to eight 10 mm cells. B Single Cell Reference Holder For B Linear Transport. For one cell with up to 10 mm pathlength. B Cell Holder, for 13-Cell Changer Carousel for 13-Cell Changer for glass/quartz cuvettes. B Cell Holder, for 13-Cell Changer Carousel for 13-Cell Changer for plastic cuvettes. B Long Pathlength Reference Holder, Non-thermostatted For B Manual Cell Changer. B Cell Holder, Water Thermostattable For B Manual Cell Changer. Accepts eight cells of up to 10 mm pathlength. B Reference Cell Holder, Water Thermostattable For B Manual Cell Changer. B

14 Accessories UV US Temperature-controlled Accessories 1+1 Peltier System For Lambda 25/35/45/10/20/40/Bio Spectrometers. Selectable temperature range C. Requires accessory PCB L for Lambda 25/35/45 or PCB B for Lambda 10/20/40/Bio. Includes routine single-cell Peltier system and B Reference Holder. Requires, but does not include, installation by a PerkinElmer Service Engineer. N Peltier System For Lambda 25/35/45/10/20/40/Bio Spectrometers. Selectable temperature range C. Requires accessory PCB L for Lambda 25/35/45 or PCB B for Lambda 10/20/40/Bio. Includes routine 9-cell Peltier system and B Reference Holder. Requires, but does not include, installation by a PerkinElmer Service Engineer. N Position Cell Holder As included in N Peltier System. B Reference Holder As included in N Peltier System and N Peltier System. B TempLab Software Software to control the Research Peltier Systems (both single cell and six cell) to assist in the studies of melt points. The TempLab software controls the spectrometer and the Research Peltier Accessory seamlessly and provides the algorithms, graphics, and custom reports required for melting point determinations. Validated under the Windows 95, 98, and NT4.0 operating systems for use with the Lambda 25, 35, or 45. UVWinLab v2.85 or later and a Research Peltier Accessory (L or L ) are required. L Peltier Controlled Fluid Circulator An external fluid circulator for use with all thermostatted cell holders enabling Peltier-effect temperature control. With both heating and cooling ability the circulator provides a temperature range of C with an accuracy of +/-0.1 C. Also included is a serial port and documentation to enable PC programming. Includes L , Result Database Software. N Research Peltier System, Single Cell For thermostatting of one rectangular cell in the sample beam. Temperature range 0 to 100 C. Flexible programming of temperature ramps with up to 8 segments is possible. For thermostatting the reference cell holder, use B Water Thermostatted Cell Holder (not included). L Research Peltier System, 6-Position For thermostatting of up to six rectangular cells in the sample beam, stirring possible. Temperature range 0 to 100 C. Flexible programming of temperature ramps with up to 8 segments is possible. Requires (but does not include) B Linear Transport for Lambda 25/35/45/10/20/40. L Research Peltier System 6-Position (L )

15 Calibration Reference Materials Canada UV-9 CALIBRATION REFERENCE MATERIALS FOR UV/VIS AND UV/VIS/NIR SPECTROSCOPY PerkinElmer reference materials speed calibration verification of UV/Vis and UV/Vis/NIR Spectrometers,* providing laboratory managers with the evidence they need to pass the strictest quality audit. A comprehensive range of certified traceable filters and sealed cuvettes fit into the standard instrument cuvette holder allowing users to generate simple protocols to verify ordinate and abscissa accuracy, stray light radiation, and spectral resolution. There is also a range of color and reflectance materials specifically designed for the popular Lambda 9/18/19/800/900 Spectrometers. All reference materials are certified traceable to NIST primary reference material and supplied with a calibration certificate detailing the calibration method and results. A USA-based calibration laboratory ensures a reliable two-week turnaround service for periodical recalibrations, allowing laboratories to maintain the requirements of their calibration SOPs. Key features Comprehensive range of materials Traceable to NIST Immediate availability Rapid recalibration service Photometric Accuracy Reference Material Set PKI 930 Set of neutral density reference materials to verify the ordinate accuracy of UV/Vis and UV/Vis/NIR Spectrometers. The set comprises three glass filters mounted in precision aluminum spring mounts. They are designed for use with the standard 10 mm cuvette holders of most UV/Vis and UV/Vis/NIR Spectrometers. The set is provided in a robust aluminum container. The ordinate and abscissa values of each filter are quoted in the accompanying Certificate of Calibration. The glasses have been selected because of their homogeneity and stability, and their generally uniform transmission values with respect to wavelength. The glass filters are chosen to provide nominal absorbance values of 0.5 A (30%T), 0.7 A (20%T) and 1 A (10%T), respectively. NG nominal 10%, 20%, 30%. Available June L Photometric Accuracy Reference Material Set PKI 1930 Set of neutral density reference materials to verify the ordinate accuracy of UV/Vis and UV/Vis/NIR Spectrometers. The set comprises three glass filters mounted in precision aluminum spring mounts. They are designed for use with the standard 10 mm cuvette holders of most UV/Vis and UV/Vis/NIR Spectrometers. The set is provided in a robust aluminum container. The ordinate and abscissa values of each filter are quoted in the accompanying Certificate of Calibration. The glasses have been selected because of their homogeneity and stability, and their generally uniform transmission values with respect to wavelength. The glass filters are chosen to provide nominal absorbance values of 0.3 A (50%T), 1.5 A (3%T) and 2 A (1%T), respectively. NG nominal 1%, 3%, 50%. Available June L Photometric and Wavelength Accuracy Reference Material Set Set of reference materials to verify the ordinate and abscissa (wavelength) accuracy of UV/Vis and UV/Vis/ NIR Spectrometers. The set comprises four glass filters mounted in precision aluminum spring mounts. They are designed for use with the standard 10 mm cuvette holders of most UV/Vis and UV/Vis/NIR Spectrometers. The set is provided in a robust aluminum container. There are three neutral density glass filters for checking the ordinate accuracy and a holmium oxide glass filter for checking the wavelength accuracy of a spectrometer. Each filter has an identification number. The ordinate and abscissa values of each filter are quoted in the accompanying Certificate of Calibration. NG nominal 10%, 20%, 50%/holmium oxide filter. B Stray Light Solutions Reference Material Set Set comprising four solutions in sealed cells one reference solution and three test solutions. The cells are designed for use with the standard 10 mm cuvette holders of most UV/Vis and UV/Vis/NIR Spectrometers. The test solutions comprising sodium iodide, sodium nitrite, and potassium chloride, act as a cut-off filter with a very precise wavelength. The set is provided in a robust aluminum container with a Certificate of Calibration. Sodium iodide, sodium nitrite, potassium chloride, and water. B Pharmacopoeia Solutions Reference Material Set Set of sealed cells to verify calibration in accordance with Pharmacopoeia monographs ordinate (photometric) accuracy; potassium dichromate abscissa (wavelength) accuracy; holmium perchlorate level of stray radiation; potassium chloride resolution; toluene in hexane Set comprising six solutions in sealed cells two reference solutions and four test solutions. The cells are designed for use with the standard 10 mm cuvette holders of most UV/Vis and UV/Vis/NIR Spectrometers. The set is provided in two robust aluminum containers with a Certificate of Calibration. Potassium dichromate/ potassium chloride, holmium perchlorate, toluene. B *Not diode array spectrometers Photometric and Wavelength Accuracy Reference Material Set (B )

16 Calibration Reference Materials UV US Spectralon UV/Vis/NIR Diffuse Reflectance Reference Material Spectralon Diffuse Color Reference Material Disposable Reference Mirror for Reflectance Spectroscopy For use with Lambda 9/18/19/800/ mm integrating spheres Durable, chemically inert High reflectance values 95% to 99%! Washable Direct traceability to the National Institute of Standards and Technology (NIST) Spectralon diffuse reflectance standard sets consist of a diffuse white standard and a selection of diffuse gray reference material. Each standard in the set is supplied with complete diffuse reflectance data from 250 nm to 2500 nm, and is mounted in an anodized aluminum frame. The set is packed in an airtight storage case. Set of four calibrated 1.25" D diffuse reflectance reference materials. Reflectance factors: 99%, 75%, 50%, and 2%. PELA9010 Set of eight calibrated 1.25" D diffuse reflectance reference materials. Reflectance factors: 99%, 80%, 60%, 40%, 20%, 10%, 5%, 2%. PELA9012 Set of eight calibrated 2.00" D diffuse reflectance reference materials. Reflectance factors: 99%, 80%, 60%, 40%, 20%, 10%, 5%, 2%. PELA9013 For use with Lambda 9/18/19/800/ mm integrating spheres Durable, chemically inert Highly diffuse Consistent reflectance Non-thermochromic These durable, waterproof reference materials can be washed and easily machined without loss of color or surface texture. They are non-thermochromic, so there is no need to control laboratory temperature. As in the Diffuse Reflectance Reference Material Set, reference materials are supplied with data from 250 nm to 2500 nm, mounted in anodized aluminum frames, and packed in an airtight case. Calibrated Diffuse Color Reference Material Set Set of four calibrated 2" D diffuse color reference materials. Set includes one each: red, green, blue, and yellow standard. PELA9018 Calibrated Diffuse Color and Neutral Reflectance Reference Material Set Set of eight calibrated 2" D diffuse color and neutral reflectance materials. Set includes one each: red, green, blue, yellow, and four diffuse reflectance reference materials: 99%, 75%, 50%, and 2%. PELA9020 Calibrated Diffuse Color Reference Materials Set of eight calibrated 2" D diffuse color reference materials. Set includes one each: red, green, blue, yellow, orange, purple, cyan, and violet. PELA9021 This mirror is necessary to check the accuracy of absolute and to correct the spectra of non-absolute specular reflectance accessories. The mirror is a secondary standard and is calibrated according to GLP regulations, wavelength range 250 nm-2500 nm. N Recalibration Reference Material To guarantee the integrity of the reference materials, you should have them recalibrated at periodic intervals. The recommended recalibration frequency is shown on the enclosed Certificate of Calibration. PerkinElmer will perform recalibration. N (Set) N (Single) Calibrated White Plate, Spectralon 1.25" calibrated diffuse reflectance reference material, Spectralon. PELA9057 Calibrated White Plate, Spectralon 2" calibrated diffuse reflectance reference material, Spectralon. PELA9058 Calibrated Diffuse Reflectance Reference Material Set, Color Calibrated Spectralon color reference materials, set of four, and approximately 5 cm diameter. PELA9019

17 Canada PC Software Packages UV WinLab Operating Software Upgrade for Lambda 800/900 Windows -based operating software. Provides recording, manipulation, and storage of spectral data and complete control of instruments and accessories of Lambda series spectrometers. Operating modes: ScanFixed wavelength, kinetics, wavelength program, calibration concentration measurements, 50 standards, five ordinate types, five curve models, background correction, instrument validation. Additionally, general arithmetic functions, peak-picking, kinetics slope calculations, efficient report generator and optional automation. PC requirements recommended: 486 microprocessor or higher, 8 MB RAM or higher, 80 Mbyte hard disk or higher and Windows NT. Included with Lambda 800 and 900. L Instrument Performance Verification (IPV) Software A dedicated software package to verify the performance of Lambda 25, 35, 45, or Lambda 800 or 900. Properties of the spectrometer checked include: wavelength accuracy, wavelength repeatability, resolution, photometric accuracy, photometric linearity, baseline flatness, noise, absorbance zero stability, and stray light. Includes L , Result Database Software. Validated under the Windows 95, 98, and NT4.0 operating systems. Operation with the Lambda 25, 35, and 45 requires UVWinLab v2.85. Use with the Lambda 800/900 requires UVWinLab v3.04 or later. L Color Methods Software A software package to calculate color indices for liquids, and clear and opaque solids. Compliant with all the major CIE, ASTM, DIN, and ISO methodologies, the software includes predefined illuminants, observers, and calculations required by the above along with easyto-use graphical representation of results. Includes L , Result Database Software. Validated under the Windows 95, 98, and NT4.0 operating systems. Operation with the Lambda 25, 35, and 45 requires UVWinLab v2.85 or later. Use with the Lambda 800/900 requires UVWinLab v3.04. L Lambda 800/900 Spectrometers Software and Sippers Architectural Glass Software Software to enable the reflectance and transmittance properties of thin-film coatings applied to architectural glass to be evaluated. Included are ISO, DIN, and ASTM methods for light, solar, and UV, UVA, and UVB and normal, double, and triple glazing. Includes L , Result Database Software. Validated under the Windows 95, 98, and NT4.0 operating systems. For operation with the Lambda 25, 35, and 45, UVWinLab v2.85 or later is required. Use with the Lambda 800/900 requires WinLab v3.04 or later. L Protection Glass Software Software offering industry standard calculations required for personal and industrial eye protection. Included are luminous, visible, UV, and near-ir transmittance calculations along with shade number and relative visual attenuation. Includes L , Result Database Software. Validated under the Windows 95, 98, and NT4.0 operating systems. Operation with the Lambda 25, 35, and 45 requires UVWinLab v2.85. Use with the Lambda 800/900 requires UVWinLab v3.04 or later. L Filter Testing Software A dedicated software package to evaluate transmission characteristics of optical thin-film coatings for bandpass and non-bandpass filters. Includes L , Result Database Software. Validated under the Windows 95, 98, and NT4.0 operating systems. Operation with the Lambda 25, 35, and 45 requires UVWinLab v2.85. Use with the Lambda 800/900 requires UVWinLab v3.04 or later. L Result Database Software Allows the results from UVWinLab or associated application software modules to be stored in a Microsoft Access database. Included are powerful tools for recalling, reporting, and trending data within the database to detect trends. Validated under the Windows 95, 98, and NT4.0 operating systems. Operation with the Lambda 25, 35, and 45 requires UVWinLab v2.85. Use with the Lambda 800/900 requires UVWinLab v3.04 or later. L Sippers Peristaltic Sipper PESI Sampling purging and return time selectable from software. Requires B , Lambda 800/900 Sipper Installation Kit, B Lambda 800/900 Accessory PC Board, and a Flowcell of choice with screw connectors. B Vacuum Sipper VASI with Pinch Valve Sampling purging and return time selectable from software. Requires B , Lambda 800/900 Sipper Installation Kit, B Lambda 800/900 Accessory PC board, a Flowcell of choice with screw connectors, and B Pump Unit. B Vacuum Sipper VASI with Solenoid Valve Sampling purging and return time selectable from software. Requires, but does not include, B Lambda 800/900 Sipper Installation Kit, B Lambda 800/900 Accessory PC Board, a Flowcell of choice with screw connectors, and B Pump Unit. B Pump Unit Vacuum pump with 1 L waste bottle. For use with sipper systems (or funnel cells). B V/60 Hz B V/50 Hz Flow-through Cell, QS, 10 mm, with two Screw Connectors 10 mm pathlength, with two screw connectors, Quartz SUPRASIL, 160 µl cell volume. B Micro-Flowcell, Glass For PESI/VASI sippers, 160 µl volume, 10 mm pathlength and screw connectors. B Long Pathlength Flowcell, Quartz Glass, SUPRASIL For PESI/VASI sippers, quartz, 50 mm pathlength, 600 µl volume, 4 mm circular chamber with nipple connector. B Tubing Tubing Kit Peristaltic For Peristaltic Sipper PESI and Vacuum Sipper VASI with Pinch Valve. B Tubing Kit for Vacuum Sipper VASI with Solenoid Valve For Micro Flowcells with screw connectors. B Tubing for Peristaltic Pump (Purple/Purple) 2.06 mm i.d. with 0.80 mm wall thickness. B (pkg. 12) UV-11

18 UV-12 Lambda 800/900 Spectrometers Reflectance Accessories US Integrating Sphere, 60 mm, for Lambda 800/900 Spectrometer Spectralon coated integrating sphere 60 mm diameter, 8 sample and reference reflectance ports. Wavelength range: 190 to 900 nm (Lambda 800), 190 to 2500 nm (Lambda 900). PELA1020 Integrating Sphere, 60 mm, Infragold for Lambda 800/900 Spectrometer Integrating sphere, 60 mm diameter, 8 sample and reference reflectance ports. Wavelength range: 900 to 3200 nm. PELA1021 Integrating Sphere, 150 mm, for Lambda 800/900 Spectrometer Spectralon coated integrating sphere, 150 mm diameter, 8 sample and reference reflectance ports, 0 transmittance port with optional cuvette holder, removable light trap at 8. Wavelength range: 200 to 900 nm (Lambda 800), 200 to 3300 nm (Lambda 900). PELA1000 Accessories for 150 mm Integrating Sphere Small Spot Accessory Kit for 150 mm Integrating Sphere Lens kit for reducing beam size to the transmittance, to the center mount, and to the diffuse reflectance position. PELA9048 Center-mounted Sample Holder, Jaw Style For 150 mm integrating spheres. Jaw style for solid samples like glasses, prisms, etc. PELA9038 Center-Mounted Sample Holder, Clip Style For 150 mm integrating spheres. Clip style for films and paper samples. PELA9039 Powder Sample Holder Set For measurement of powder samples. PELA9040 Biconical Accessory Small Spot Size (Praying Mantis) For diffuse reflectance measurement with horizontal sample position for powders, pastes, and granulates. Provides a very small (approx. 2 mm) spot size. Wavelength range: 200 to 900 nm (Lambda 800), 200 to 3300 nm (Lambda 900). PELA1022 Biconical Accessory Integrating Sphere Cell Holder for Integrating Sphere For measurement in 1 cm cuvettes in transmission or reflectance mode. C Center-mounted Sample Holder, Clip Style

19 Canada Lambda 800/900 Spectrometers Reflectance Accessories UV-13 Absolute Fixed-angle Reflectance Accessory The absolute accessory mounts in the standard sample compartment of the Lambda 800/900. It is used to produce absolute data on various types of reflective surfaces. Both highly reflective and anti-reflective surfaces may be measured. When measuring a sample, only one light bounce from the sample surface is required. This provides the optimal s/n performance. As implied, this is an absolute accessory so no additional mirrors or changes to the reflective surfaces are done, only the introduction of the sample. Specifications Angle of Incidence: 8, 15, 30, 45, and 60 Typical Accuracy: Better than 1% reflectance when compared to a known commercially available standard (SRM 2003 etc.) Wavelength Range: 175 to 900 nm (Lambda 800), 175 to 3300 nm (Lambda 900) Sample Size: Minimum sample size ~ 1" VN Baseplate VN 8 N N Specular Reflectance Remote Multi-angle Relative Specular Accessory Reflectance optrode which is connected by monofiber optic cables to the spectrometer allowing remote specular measurement of samples. Three angles of incidence: 7.5, 30, and 45. B and monofibers are required. PELA1034 VW Absolute Specular Reflectance Accessory for the Lambda 800/900 Spectrometer For measurements of absolute specular reflectance of filters, glasses, and mirrors. 7.5 of light incidence. Minimum sample size is 40 mm x 40 mm square or 50 mm diameter round sample. PELA1029 Variable Angle Absolute Specular Reflectance Accessory for Lambda 800/900 Spectrometer Angle of incidence from 10 to 72. Sample size 7.5 cm x 10 cm x 1.5 cm. Wavelength range: 200 to 900 nm (Lambda 800), 200 to 2500 nm (Lambda 900). PELA1030 Variable Angle Reflectance Accessory Vernier selection of incidence angle from Accommodates samples from 20 x 20 mm to 100 x 100 mm. B Variable Angle Reflectance Accessory VN 15 VN 30 VN 45 VN 60 N N N N Remote Multi-angle Relative Specular Accessory Absolute Fixed-angle Reflectance Accessory VW Absolute Specular Reflectance Accessory

20 UV-14 Lambda 800/900 Spectrometers Reflectance Accessories Relative Specular Reflectance Accessory 6 Fixed angle of incidence of 6. Accommodates samples from 20 x 20 mm to 100 x 100 mm. B Relative Specular Reflectance Accessory, 6 (B ) Relative Specular Reflectance Accessory 45 for the Lambda 800/900 For reflectance measurements 45 of light incidence. PELA1025 Grazing Angle Relative Reflectance Accessory for the Lambda 800/900 For reflectance of thickness measurements 80 of light incidence. PELA1026 Spare Standard Mirror For C Relative Specular Reflectance Accessory and B Variable Angle Reflectance Accessory. B Polarizers/Depolarizers Common beam Depolarizer for Lambda 800/900 Spectrometer For measurements with depolarized light. Wavelength range: 190 to 900 nm (Lambda 800), 190 to 2600 nm (Lambda 900). Setup with stepper drive, controlled by UV WinLab software. Service installation required. B Double Polarizer Drive for Lambda 800/900 Spectrometer High-performance double polarizer (depolarizer) driver for installation in the sample compartment. The polarization (depolarization) orientation can be changed by a stepper drive with the UV WinLab software. Resolution of 0.2. The polarization (depolarization) orientation can be changed at up to 20 wavelength positions. Required but not included are one or two of the following polarization elements: (a) B , (b) B , (c) B B US Polarizer Crystal for Lambda 800/900 Double Polarizer Drive High-performance polarizer. One set to update the double polarizer drive. For equal energy level in sample and reference beam, two sets are necessary (B and B ). Wavelength range: 300 to 900 nm (Lambda 800), 300 to 2600 nm (Lambda 900). B Film Polarizer for Lambda 800/900 Double Polarizer Drive High-performance film polarizer. One part to update the double polarizer drive. For equal energy level in sample and reference beam, two are necessary (B and B ). Wavelength range: 400 to 700 nm. B Depolarizer Crystal for Lambda 800/900 Double Polarizer Cassette High-performance depolarizer crystal for measurements in depolarized light in the sample compartment. One part to update the double polarizer drive. For equal energy level in sample and reference beam, two are necessary (B and B ). The depolarizer crystals can be rotated at up to 20 wavelength points to get a wavelength independent depolarization. Wavelength range: 190 to 900 nm (Lambda 800), 190 to 2600 nm (Lambda 900). B Relative Specular Reflectance Accessory, 45 (PELA1025) Double Polarizer Drive (B )

21 Canada General Purpose Optical Bench System General Purpose Optical Bench (GPOB) for Lambda 800/900 Spectrometer The GPOB features a magnetized, ruled optical bench with a moveable 60 mm Spectralon collection integrating sphere. Samples up to 400 mm in pathlength can be analyzed using the General Purpose Optical Bench. Wavelength range: 200 to 900 nm (Lambda 800), 200 to 2700 nm (Lambda 900). PELA1003 General Purpose Optical Bench (PELA1003) Accessory Kits 60 mm Diffuse Reflectance Integrating Sphere Accessory Kit To be mounted on the General Purpose Optical Bench for diffuse reflectance analysis. PELA1004 Sample Holder Mount Kit Two cantilever sample holders with magnetic bases. PELA1005 Variable Angle Transmittance Sample Holder Kit Holder allows for holding samples at an accurately measured angle to the incident beam for measurement of transmittance. Samples can be up to 1 cm thick and up to 10 cm square. PELA1006 Lens Assembly Kit The kit allows for the focusing of the beam to a small spot by means of a number of plane convex lenses and iris diaphragms. The lenses are mounted on magnetized bases. PELA1007 Lambda 800/900 Spectrometers Reflectance Accessories Optical Bench Kit Two magnetized, mounted iris diaphragms on two optical rails with mounts. PELA1008 Fiber Optic Reference Feed Kit (PELA1009) Fiber Optic Reference Feed Kit The kit allows the reference beam to be introduced into the sphere via a flexible fiber optic bundle. This eliminates the need to use mirrors to direct the reference beam into the sphere allowing a wider variety of geometries to be used. PELA1009 Light Trap Aperture Kit The kit contains black glass light traps and iris diaphragms especially mounted for use with the General Purpose Optical Bench. PELA1010 Specular Reflectance Kit Kit consists of six mirrors on magnetized bases that can be easily placed on the base plate of the General Purpose Optical Bench. Included are two square, flat mirrors with magnesium fluoride overcoat, two concave and two convex mirrors. PELA1011 Flat Mirror Kit Kit consists of two, 2-inch-square plane mirrors on magnetic mounts. PELA1012 Short Focal Length Mirror Kit, Spot Incidence Kit consists of a short focal length (20-30 mm) concave mirror on an adjustable base with magnetic mounts to allow for small spot incidence of curved samples. PELA1013 Beam Blocker Kit Optical black beam blocker on adjustable base with magnetic mounts. PELA1014 Fiber Optic Measurement Stage and Holder Kit Includes two fiber optic holders to allow for measurement of small diameter fibers and fixed apertures. PELA1015 Fiber Optics Accessories Transfer Optic for Monofibers Fiber optic transfer holder for Lambda spectrometers. Requires pair of monofibers. B Pair of Monofibers UV/Vis (250 to 900 nm) 2 x 2 m each. B Pair of Monofibers Vis/NIR (400 to 2400 nm) 2 x 2 m each. B Light Trap Accessories Light Trap Accessory For use with the PELA mm Sphere Accessory. PELA9026 Light Trap Accessory For use with the PELA mm Spectralon Sphere Accessory. PELA9033 Customized Accessories Please contact your local PerkinElmer Product Application Specialist for more information. Downward-viewing Integrating Sphere, 150 mm for Lambda 800/900 Spectrometer Sample measurement in horizontal position of powders, granular materials, and large irregular geological samples. Spectralon coated integrating sphere, 150 mm diameter, 8 sample and reference reflectance ports, 0 transmittance ports with optional cuvette holder. Removable light traps at 8. Wavelength range: 200 to 900 nm (Lambda 800), 200 to 2500 nm (Lambda 900). PELA /45 Accessory for Lambda 800/900 Spectrometer For extremely accurate color measurements. Angle of incidence 0. Angle of collection 45 with ellipsoidal mirror to integrating sphere detector. Sample size unlimited. Wavelength range: 200 to 900 nm (Lambda 800), 200 to 2500 nm (Lambda 900). PELA1016 UV-15

22 UV-16 Lambda 800/900 Accessories US Large Format Accessory for Filter and Semiconductor Wafer Key Features Sampling flexibility and superior data quality. Measure samples from 150 mm (6 in.) to 430 mm (17 in.) in diameter. Sample positioning at 25 mm (1 in.) intervals. Variable angle transmission measurements. Accessory Specifics The Large Format Accessory (LFA) has been designed for quality control analysis of wafers that range in size from 150 mm (6 in.) to 430 mm (17 in.) in diameter. The LFA with the Lambda 800 or Lambda 900 can measure the sample transmission up to 6 o.d. in the visible region. The LFA can be used over wavelength range of 200 nm to 2500 nm. In addition, the samples can be measured at normal angle of incidence as well as 5, 10, and 15. Whether looking at the substrate or a fully bonded wafer, the LFA with the Lambda 800 or Lambda 900 provide an excellent tool for increasing productivity and reducing the cost of poor quality. N Absolute Directional VW Specular Reflectance Accessory Key Features Superior data quality with sampling flexibility. Accuracy levels comparable to National Metrology laboratories. Variable angle VW reflectance accessory. Built-in laser ensures optical alignment and ease-of-use. A Unique Accessory The VW directional reflectance accessory is the only commercially available accessory that can perform absolute reflectance measurements at oblique as well as near-normal incidence at an accuracy level comparable with that of National Metrology laboratories. This tool, when combined with the Lambda 800 UV/Vis or the Lambda 900 UV/Vis/NIR spectrometer, provides superior data quality with sampling flexibility. Directional Relative Reflectance/ Transmission Accessory Key Features Sampling flexibility and superior data quality. Variable angle reflectance and transmission in one accessory. Precise angle incident angle control. Easy switch between reflectance and transmission. Glan-Thompson polarizer for UV Visible and NIR use. A Unique Accessory The R/T directional transmission and reflectance accessory is the only commercially available accessory that can perform transmission and relative reflectance measurements at oblique as well as near-normal incidence with an accuracy level comparable with that of National Standards laboratories. This tool, when combined with the Lambda 800 UV/Vis or the Lambda 900 UV/Vis/NIR spectrometer, provides superior data quality with sampling flexibility. The Complete R/T System To ensure ease-of-use and accurate results, the Reflectance and Transmission measurement system is used in conjunction with an integrating sphere detector. The integrating sphere detector such as the PELA 1020 is used for two primary reasons. First, more than one reflection is required in many cases to accurately determine the reflectance of a sample and the integrating sphere has a large port for collection of these multiple reflections. The use of the integrating sphere also minimizes the effect of beam divergence due to interaction with the sample (such as thick glass or optical filters). The accessory is prealigned and fully tested to provide the utmost in performance. As part of the factory test procedure, the second surface mirror is calibrated at 45 (P and S polarization). A file with the calibration data is supplied on the CD-ROM. This provides the user with the means of validating the Lambda 800/Lambda 900 system prior to use. L Double Aperture Accessory Key Features Designed to eliminate errors caused by back reflectances. Improves accuracy levels to that of the National Metrology laboratories. Complete package including test methods and data. To obtain the ultimate photometric accuracy with a spectrophotometer, the small nonlinear response characteristic (on the order of to 0.004%T depending on the wavelength) of the photomultiplier must be accounted for and corrected. The Double Aperture accessory provides a method to correct these physical errors there by increasing the photometric accuracy obtainable by the Lambda 800/900. The DA accessory consists of two square apertures separated by a 1 mm high septum which is placed approximately at the height of the optical axis. Each aperture can be opened or closed manually by a sliding shutter, which is coated black to reduce the effect of stray radiation. The shutters are placed under an 80 angle (instead of 90 ) with respect to the optical axis in order to prevent the occurrence of interreflections with the instrument s optics and with the filter. The Double Aperture accessory is the proven choice where photometric accuracy is a key component of your analysis needs. From research to manufacturing, modern coatings and state-of-the-art optical designs are pushing the envelope in their requirements to produce the highest quality data. In response to these needs PerkinElmer has provided the next-generation solution to meet the demands of the material science world. L Calibrating Reflectance Standards The VW directional reflection set makes it possible to calibrate reflectance standards not only at near-normal incidence, but also at oblique incidence for P and S polarization separately. The total calibration uncertainty which can be obtained on reference mirrors with a reflectance > 80% using this high-performance accessory is typically < 0.1% in the visible range and < 0.2% in the UV and NIR ranges. L

23 Canada Lambda 25/35/45/10/20/40 Spectrometers UV-17 PC Software Packages UV WinLab Operating Software Upgrade for Lambda 25/35/45/10/20/40 Windows -based operating software provides: recording, manipulation and storage of spectral data with instrument validation and control of instruments and accessories of Lambda spectrometers. L Dissolution Lab Software Package For automated on-line or off-line dissolution analysis with Lambda 25/35/45 Spectrometers. Operates under Windows, and controls the spectrometer and sampling system for automated operation. Provides user-level password security, flexible data collection options, and many report options with statistical treatment of results. Requires, but does not include, UV WinLab software. L UV FIAS Software Windows-based application software which controls PerkinElmer Lambda Spectrometers with AS93 Autosampler and FIAS 300/400 modules. L GraFit Software Windows-based software package for enzyme mechanism studies of kinetic measurements. Michaelis-Menten, Lineweaver-Burk fits available. C Instrument Performance Verification (IPV) Software A dedicated software package to verify the performance of Lambda 25, 35, 45, or Lambda 800 or 900. Properties of the spectrometer checked include: wavelength accuracy, wavelength repeatability, resolution, photometric accuracy, photometric linearity, baseline flatness, noise, absorbance zero stability, and stray light. Includes L , Result Database Software. Validated under the Windows 95, 98, and NT4.0 operating systems. Operation with the Lambda 25, 35, and 45 requires UVWinLab v2.85. Use with the Lambda 800/900 requires UVWinLab v3.04 or later. L Color Methods Software A software package to calculate color indices for liquids, and clear and opaque solids. Compliant with all the major CIE, ASTM, DIN, and ISO methodologies, the software includes predefined illuminants, observers, and calculations required by the above along with easyto-use graphical representation of results. Includes L , Result Database Software. Validated under the Windows 95, 98, and NT4.0 operating systems. Operation with the Lambda 25, 35, and 45 requires UVWinLab v2.85 or later. Use with the Lambda 800/900 requires UVWinLab v3.04. L Architectural Glass Software Software to enable the reflectance and transmittance properties of thin-film coatings applied to architectural glass to be evaluated. Included are ISO, DIN, and ASTM methods for light, solar, and UV, UVA, and UVB and normal, double, and triple glazing. Includes L , Result Database Software. Validated under the Windows 95, 98, and NT4.0 operating systems. For operation with the Lambda 25, 35, and 45, UVWinLab v2.85 or later is required. Use with the Lambda 800/900 requires WinLab v3.04 or later. L Protection Glass Software Software offering industry standard calculations required for personal and industrial eye protection. Included are luminous, visible, UV, and near-ir transmittance calculations along with shade number and relative visual attenuation. Includes L , Result Database Software. Validated under the Windows 95, 98, and NT4.0 operating systems. Operation with the Lambda 25, 35, and 45 requires UVWinLab v2.85. Use with the Lambda 800/900 requires UVWinLab v3.04 or later. L Filter Testing Software A dedicated software package to evaluate transmission characteristics of optical thin-film coatings for bandpass and non-bandpass filters. Includes L , Result Database Software. Validated under the Windows 95, 98, and NT4.0 operating systems. Operation with the Lambda 25, 35, and 45 requires UVWinLab v2.85. Use with the Lambda 800/900 requires UVWinLab v3.04 or later. L Result Database Software Allows the results from UVWinLab or associated application software modules to be stored in a Microsoft Access database. Included are powerful tools for recalling, reporting, and trending data within the database to detect trends. Validated under the Windows 95, 98, and NT4.0 operating systems. Operation with the Lambda 25, 35, and 45 requires UVWinLab v2.85. Use with the Lambda 800/900 requires UVWinLab v3.04 or later. L Sippers Peristaltic Sipper PESI For Lambda instruments. Sampling, purging, and return time selectable from keyboard. For Lambda 25/35/45/ 10/20/40, no accessory PCB necessary. Requires, but does not include, B or B accessory PCB for Lambda Bio, 11, 12, and 14 UV/Vis Spectrometer, or B /B accessory PCB for Lambda 18/19, and B Installation Kit for Lambda 800/900 Spectrometers. Requires, but does not include, Flowcell of choice with screw connector. B Vacuum Sipper VASI with Pinch Valve For Lambda instruments. Sampling and purging time selectable from keyboard. For Lambda 25/35/45/ 10/20/40 no accessory PCB necessary. Requires, but does not include, B or B accessory PCB for Lambda Bio, 11, 12 and 14 UV/Vis Spectrometer or B /B accessory PCB for Lambda 18/19, and B Installation Kit for Lambda 800/900. Requires, but does not include, B Pump Unit (110 V/60 Hz) or B Pump Unit (220 V/50 Hz) and Flowcell of choice with screw connector. B Vacuum Sipper VASI with Solenoid Valve For Lambda instruments. Sampling and purging time selectable from keyboard. For Lambda 25/35/45/ 10/20/40, no accessory PCB necessary. Requires, but does not include, B or B accessory PCB for Lambda Bio, 11, 12, and 14 UV/Vis Spectrometer or B /B accessory PCB for Lambda 18/19, and B Installation Kit for Lambda 800/900. Requires, but does not include, B Pump Unit (110 V/60 Hz) or B Pump Unit (220 V/50 Hz), and Flowcell of choice with screw connector. B Tubing Kit Peristaltic For Peristaltic Sipper PESI B , and Vacuum Sipper VASI with Pinch Valve, B B Tubing Kit For B Vacuum Sipper VASI with Solenoid Valve. For Micro Flowcells with screw connectors. B Tubing for Peristaltic Pump (Purple/Purple) 2.06 mm i.d. with a 0.80 mm wall thickness. B (pkg. 12) Flow-Through Cell, QS, 10 mm, with Two Screw Connectors 10 mm pathlength, with two screw connectors, Quartz SUPRASIL, 160 µl cell volume. B Long Pathlength Flowcell, 50 mm, with Two Screw Connectors 50 mm pathlength, with two screw connectors, Quartz, 370 µl cell volume. B Micro Flowcell for Sipper, QS, 50 mm, with Nipple Connector 50 mm pathlength, 4 mm circular chamber. Nipple connector, Quartz SUPRASIL, 600 µl cell volume. B Micro Flowcell, QS, 10 mm, with Nipple Connector 10 mm pathlength, non-thermostatted, nipple connector, Quartz SUPRASIL, 160 µl cell volume. B

24 UV-18 Lambda 25/35/45/10/20/40 Spectrometers Autosampler AS93plus Autosampler For Lambda 25/35/45. Includes AS93plus Autosampler with Tray E for 180 sample locations (6 or 8 ml, 13 mm diameter) and 20 standard locations (50 ml, 30 mm diameter), and peristaltic pump for sample transfer. Does not require accessory PCB. Requires, but does not include, a sipper and flowcell. B Autosampler Sample Vessels 6 ml Sample Vessels Polypropylene with screw cap. For use with Tray E. B (pkg. 500) 8 ml Sample Vessels Polypropylene without screw cap. For use with Tray E. B (pkg. 1000) 15 ml Sample Vessels Polypropylene with screw cap. For use with Tray F. B (pkg. 500) 50 ml Sample Vessels Polypropylene with screw cap. For use with Tray G or as standard solution vessel with all AS93plus trays. (Trays E, F, G) B (pkg. 500) Reflection Accessories Integrating Sphere for Lambda 35/10/20/40/12/14 Spectralon -coated, wavelength range 250 to 1100 nm, for scattered transmittance and diffuse reflectance measurement. Powder Sample Holder B included. C Calibrated White Plate, Spectralon 2" calibrated diffuse reflectance standard, Spectralon. PELA9058 Relative Specular Reflectance Accessory, 6 For reflectance or thickness measurements. 6 angle of light incidence. B Relative Specular Reflectance Accessory, 6 (B ) US Reflectance Accessory Variable angle of incidence (15 to 70 ) for sample position. In double-beam instruments a second unit as reference is recommended. Accommodates samples from 20 x 20 mm to 100 x 100 mm. B Spare Mirror For B Specular Reflectance Accessory and B Reflectance Accessory. This mirror is not calibrated. B Reflectance Accessory (B ) Sample Trays Location Diameter Sample Vessel Sample Locations (mm) (ml) B or 8 B B B /29 30/16 50/15 Rack Configurations Tray Sample/Standard Type Locations Required Sub Trays Tray E 180/20 1 tray of B and 2 trays of B Tray F 149/8 1 tray of B and 2 trays of B Tray G 54/8 3 trays of B

25 Canada Fiber Optic Accessories Transfer Optic for Monofibers Fiberoptic transfer holder for Lambda instruments. Requires pair of monofibers. B Transfer Optic (B ) Set of Monofiber UV/Vis Length 2 x 2 m 600 micron diameter, standard SMA adapters included. B (pkg. 2) Fiber Optic Dip Probe, nm, 15 mm 316SS Probe Requires but does not include, B Transfer Optic, N Light Shield, and one of the following probe tips; N Probe Tip, 2 mm Pathlength; N Probe Tip, 5 mm Pathlength; or N Probe Tip, 10 mm Pathlength. N Light Shield For use with N Fiber Optic Dip Probe. N Probe Tip, 2 mm Pathlength For use with N Fiber Optic Dip Probe. N Probe Tip, 5 mm Pathlength For use with N Fiber Optic Dip Probe. N Probe Tip, 10mm Pathlength For use with N Fiber Optic Dip Probe. N Lambda 25/35/45/10/20/40 Spectrometers Miscellaneous Accessories Water Circulator 110 V/60 Hz Electronic temperature control, continuously settable from 32 to 60 C, temperature stability ± 0.2 C, with precision thermometer, built-in cooling coils. Heating rate 2 kilowatt. Power supply 110 V/60 Hz. N Water Circulator 220 V/50 Hz Electronic temperature control, continuously settable from 20 to 65 C, temperature stability ±0.2 C, with precision thermometer, built-in cooling coils. Power supply 220 V/50 Hz. B Pump Unit 110 V/60 Hz Vacuum pump with 1 L waste bottle. For use with sipper systems or funnel cells. B Pump Unit 220 V/50 Hz Vacuum pump with 1 L waste bottle. For use with sipper systems or funnel cells. B Temperature Measurement Kit For temperature monitoring in one cell. Glass cell included. Accessory PCB L required for Lambda 25/35/45, or PCB B required for Lambda 10/20/40/Bio, but not included. B Magnetic Stirrer Accessory For one-cell position. For single cell holders and cell changers. B V/60 Hz B V/50 Hz Stirring Rods Set of 15 pieces for stirring in the cuvette. For use with L Research Peltier System with 6-Cell Holder and B Cell Changer, and B Magnetic Stirrer Accessory. B Deuterium and Tungsten Source for PerkinElmer Spectrometers For optimum instrument performance, ALWAYS use original replacement sources from PerkinElmer! Our extensive quality control and inspection process demands the very best quality sources. For many of our instruments, the lamps are mounted, prealigned, and prefocused. This guarantees top performance and maximum stability from your UV/Vis Spectrometer. Description DEUTERIUM LAMPS (ULTRAVIOLET REGION) For Lambda 1 and 3 C For Lambda 2, 5, 7, 9, 10, 11, 12, 14, 15, 16, 17, 18, Bio, 19, 20, 25, 35, 40, 45, 800, and 900 B For Lambda 4 and 6 C For 55, 550, 551, 552, 552A, 553, 559, 559A B TUNGSTEN LAMPS (VISIBLE REGION) For Lambda 1 and 3 C * For Lambda 2, 5, 7, 9, 10, 11, 12, 14, 15, 16, 17, 18, Bio, 19, 20, 25, 35, 40, 45, 800, and 900 B For Lambda 4 and 6 C * For 55, 550, 551, 552, 552A, 553, 559, and 559A B *Prefocused and prealigned Notice Installation of a new lamp by a PerkinElmer Service Engineer is recommended for one reason: Optimum performance is achieved when lamp is correctly aligned Caution Tungsten Lamp (B ) Eye protection required when viewing deuterium or tungsten lamps when lit. Deuterium Lamp (B ) UV-19

26 FLR-20 Spectroscopy Cells Standard Fluorescence Cells for Fluorimetry Macro with PTFE Lid or with PTFE Stopper US Light Outside Dim. Inside Base Thickn. Cell Material Qty. Path mm H x W x D mm width mm mm Volume Windows WITH PTFE LID B Special Optical Glass 2 10 x x 12.5 x ml 4 B Quartz SUPRASIL 2 10 x x 12.5 x ml 4 WITH PTFE STOPPER B Special Optical Glass 2 10 x x 12.5 x ml 4 B Quartz SUPRASIL 2 10 x x 12.5 x ml 4 Semi-micro with PTFE Lid or with PTFE Stopper Light Outside Dim. Inside Base Thickn. Cell Material Qty. Path mm H x W x D mm Width mm mm Volume Windows WITH PTFE LID B Special Optical Glass 2 10 x 4 45 x 12.5 x ml 4 B Quartz SUPRASIL 2 10 x 4 45 x 12.5 x ml 4 WITH PTFE STOPPER B Special Optical Glass 2 10 x 4 46 x 12.5 x ml 4 B Quartz SUPRASIL 2 10 x 4 46 x 12.5 x ml 4 Special Optical Glass Macro with PTFE Lid (B )

27 Canada Ultra-micro with PTFE Stopper Spectroscopy Cells Standard Fluorescence Cells for Fluorimetry FLR-21 Light Center Outside Dim. Aperture Chamber Filling Material Qty. Path mm Height mm H x W x D mm mm Volume Volume Windows B Quartz SUPRASIL 1 10 x x 12.5 x x µl 120 µl 3 Micro with PTFE Lid or with PTFE Stopper Light Outside Dim. Inside Base Thickn. Cell Material Qty. Path mm H x W x D mm width mm mm Volume Windows WITH PTFE LID B Special Optical Glass 2 10 x 2 45 x 12.5 x µl 4 B Quartz SUPRASIL 2 10 x 2 45 x 12.5 x µl 4 WITH PTFE STOPPER B Special Optical Glass 2 10 x 2 40 x 12.5 x µl 4 B Quartz SUPRASIL 2 10 x 2 40 x 12.5 x µl 4 Micro without Lid Light Outside Dim. Inside Dim. Base Thickn. Cell Material Qty. Path mm H x W x D mm H x W x D mm mm Volume Windows Remarks B * Quartz SUPRASIL 2 5 x x 7.5 x x 5 x µl 5 B Quartz SUPRASIL 2 5 x 5 46 x 7.5 x x 5 x µl 5 with PTFE Stopper NS 5 L Micro Cell Adapter 4 * Requires microcell adapter L Microcuvette adapter allows 5 mm pathlength microcells to be used in any of the cuvette holders. (pkg. 4) Quartz SUPRASIL Ultra-micro with PTFE Stopper (B ) Quartz SUPRASIL Micro with PTFE Lid (B ) Quartz SUPRASIL Micro without Lid (B )

28 FLR-22 Spectroscopy Cells US Fluorescence Cells for Magnetic Stirrers Macro/Semi-micro Light Outside Dim. Inside Base Thickn. Cell Material Qty. Path mm H x W x D mm width mm mm Volume Windows B Quartz SUPRASIL 1 4 x 4 45 x 12.5 x µl Magnetic Stirrer fleas 6 Temperature-controlled Cells for Fluorimetry Quartz SUPRASIL Cells for Magnetic Stirrers (B ) Semi-micro Light Outside Dim. Inside Base Thickn. Cell Material Qty. Path mm H x W x D mm width mm mm Volume Windows Remarks B Quartz SUPRASIL 1 10 x 4 48 x 12.5 x ml 5 horizontal inlet/ outlet tubes to temp. chamber Flow-through Cells for Fluorimetry Quartz SUPRASIL Flow-through Cells for Fluorimetry (B ) Macro Inlet/Outlet Tubes on Top Light Outside Dim. Inside Base Thickn. Cell Material Qty. Path mm H x W x D mm width mm mm Volume Windows B Quartz SUPRASIL 1 10 x x 12.5 x x µl 3 Semi-micro Inlet/Outlet Tubes on Top Light Outside Dim. Inside Base Thickn. Cell Material Qty. Path mm H x W x D mm width mm mm Volume Windows B Quartz SUPRASIL 1 10 x x 12.5 x x µl 3 B * Quartz SUPRASIL 1 3 x x 12.5 x x µl 3 Compact with two screw connectors and FEB tubing.

29 Luminescence Sample Blocks and Source Lamps Canada For Checking Day-to-Day Reproducibility of Your Luminescence Spectrometer These sample blocks provide convenient day-to-day checks for wavelength calibration and reproducibility. The six PMMA (polymethyl-methacrylate) blocks have emission characteristics in the wavelength ranges indicated below to 540 nm (anthracene/napthalene) to 600 nm (ovalene) to 400 (p-terphenyl) to 600 nm (tetraphenyl/butadiene) to 640 nm (European) to 640 nm (Rhodamine B) Sealed Water Samples This 10 mm sealed cell contains high-purity water for checking instrument sensitivity. It provides a constant sample to reproducibly measure signal-to-noise using the Raman band of water. Fluorescence Cuvette Starter Kit Includes pair of quartz cells, 10 x 10 mm, 3.5 ml cell volume (B ); set of six luminescence sample blocks ( ); sealed water sample (L ). BUVSTAR3 Luminescence Sample Blocks Description Set of six Luminescence Sample Blocks Phosphorescence Sample Blocks Sealed Water Sample Ovalene Block L CP Xenon Source Lamps Sources for the PerkinElmer Luminescence Spectrometers are pulsed Xenon discharge lamps (7.3 W average power at 50 Hz). This reliable source produces very little ozone or heat but provides remarkable sensitivity due to its peak intensity exceeding 1 KW! On most LS Series instruments the detector electronics are controlled so that delay and gate time can be varied to measure phosphorescence between source pulses. To maintain the original stability and sensitivity of your instrument, use only PerkinElmer replacement lamps. We recommend that you have your Xenon source replaced by a PerkinElmer Service Engineer (not included in the prices for the lamps). NOTICE Installation of a new lamp by a PerkinElmer Service Engineer is recommended for two reasons: Optimum performance is achieved when lamp is correctly aligned. Your personal safety is assured; Xenon lamp quartz envelopes are under pressure. Extreme caution and eye protection are necessary. Xenon Source Lamps Description For LS-1 and LS-2 Series L For For LS-3/4/5 Series For LS-30/40/45/50/55 Series CP L Festoon Lamp for the LS Series For MPF-44E and MPF-66 CP For 650, 204, 203, and 512 Series and all MPF Series excluding MPF-44E and MPF FLR-23 Note: The LS Series uses a small festoon lamp to maintain even triggering and stability. Xenon Source Lamp (L )

30 FLR-24 LS 55 FLR PC Software Packages Add-on Software Applications and Systems Short Phosphorescence Decay Routine For collecting decay data and calculating single or dual exponential lifetimes. L225B005 Enzyme Activity Program For internally-calibrated assays, e.g., resorufin-based assays for cytochrome p450, etc. L225B001 Autopole System Autopole system consisting of Julabo F25HD water bath, Julabo PT-100 in-cuvette sensor and Autopole software program. For programmed measurement of intensity, polarisation, or anisotropy vs. temperature. L V/60 Hz L V/50 Hz WPRScan Program For automated collection of up to 12 spectra from each well of a microplate. Compatible with the Plate Reader accessories L and L L225B003 AutoSampler System AutoSampler System consisting of AS-93 Plus Autosampler, Flowcell, and Autosampler software program. L US LS 55

31 Canada LS 55/50B Sampling Accessories FLR-25 Cell Holders and Accessories Well Plate Reader Accessory Total Emission Accessory Four-position Thermostatted Automatic Cell Changer, with Stirrer Changes in temperature affect the intensity of fluorescence. A simple, accurate way to control sample temperature is by replacing the standard cell holder with a thermostattable cell holder. Water is circulated from an external circulating water bath (not included) through an internal passage in the cell holder which keeps the temperature of the sample uniform. The four-position cell holder accommodates four square, 10 mm pathlength cells or four microcells with four adapters (L ). When you occasionally work with limited volume samples, use the Microcell Adapter for the 5 mm pathlength microcells, which require a minimum volume of only 600 microliters. Includes six Stirrer Fleas ( ). L Single-position Thermostatted Cell Holder Cell holder for a 10 mm pathlength cell, water thermostatted. This cell holder is included with the instrument. L Single-position Thermostatted Cell Holder, with Stirrer Cell holder with magnetic stirrer for a 10 mm pathlength cell, water thermostatted. Includes six Stirrer Fleas ( ). L Well Plate Reader Accessory For measuring fluorescence or phosphorescence in 6-, 12-, 24-, 48-, or 96-well plates or for luminescence microdensitometry of TLC plates and electrophoresis gels. Controlled by the computer. Silica excitation fiber, glass emission fiber for measurement above 260 nm excitation, 340 nm emission. Includes one pack of White Microplates (L ). Requires installation by a PerkinElmer Service Engineer. L Well Plate Reader Accessory As L but with silica excitation and emission fibers for work above 260 nm with both excitation and emission. L Well Plate Reader Accessory Upgrade To update the Standard Plate Reader L to UV performance. Supplied with L L Well Microplates Hi-White flat bottom. L (pkg. 100) Total Emission Accessory for LS 55/50B The Total Emission Accessory uses a plane mirror that swings into place in front of the emission monochromator grating so that the total fluorescence of the sample can be measured. This accessory is often used with long pass emission filters to restrict the wavelengths. The mirror can be positioned from a switch on the instrument panel. Installation of the accessory by a PerkinElmer Service Engineer is required (not included). A plane mirror in place of the emission grating will reflect about 90% of the light entering the monochromator which is considerably greater than if the grating were used in zero order. The more efficient fluorescence collection provides greater sensitivity for samples that have weak emission. It is strongly recommended for bio- and chemiluminescence measurements. In most cases the operator needs to reduce interference from other wavelengths including second-order radiation, and the use of cut-off filters is recommended. Five computer-controlled emission cut-off filters are supplied with the Model LS 55/50B Spectrometer. Requires, but does not include, installation by a PerkinElmer Service Engineer. L Coverslip Accessory Designed for 10 mm round coverslips with thickness of to mm. Requires, but does not include, a 10 mm pathlength cell. L Magnetic Stirrer Fleas (pkg. 6) 96-Well Plate Reader

32 FLR-26 LS 55/50B Sampling Accessories US Front Surface Accessory LC FlowCell Sipper Front Surface Accessory for examination of solids, powders, and viscous or opaque liquids Obtain fluorescence or phosphorescence spectra of powders, paper, plastic films, cloth samples, turbid liquids View the front surface fluorescence from a filled cuvette Study the luminescence of phosphors It is often more convenient to examine material in the solid state. The Front Surface Accessory allows you to obtain fluorescence or phosphorescence spectra of powders, paper, plastic films, cloth samples, gels, TLC section and turbid or opaque liquids with the LS 55/50B Spectrometers. Detect trace components eluted from liquid chromatographs Use your fluorescence spectrometer as a detector to monitor fluorescence continuously at selected excitation and emission wavelengths If you have a High-pressure Liquid Chromatograph, you can use your fluorescence spectrometer to detect components eluted from the column by replacing the standard cell holder with one of these LC Flowcell Accessories. The accessory includes a 1.5 mm square section fused silica flowcell with a 25 microliter illuminated volume. When a smaller volume flowcell is required, a 1.3 mm-square section flowcell with a 16 microliter illuminated volume can be used in place of the standard cell. Both cells are capable of withstanding 500 psi. Sipper Cell and Pump Accessory Rapid analysis of batches of samples If you routinely measure large numbers of liquid samples the sipper accessory is most valuable. It consists of a 16 microliter illuminated volume flowcell and a peristaltic pump controlled by the LS 55/50B Series software. Samples can be rapidly and easily transferred from a wide variety of containers to the flowcell for measurement. Includes: Flowcell, Square Section, Synthetic, Fused Silica, 1.3 mm (L ); 16 µl volume and peristaltic pump, which is controlled by the computer. Fitted as standard with 0.4 mm FEP Inlet Tube (L ) and 0.7 mm FEP Outlet Tube (L ). Requires, but does not include, installation by a PerkinElmer Service Engineer. L Flowcell, Square Section, Synthetic, Fused Silica, 1.3 mm 1.3 mm pathlength, Square Section, Synthetic, Fused Silica, 16 µl cell volume. For use in L Sipper Cell and Pump Accessory and L LC Flowcell Accessory. L Front Surface Accessory Powders are held in a special holder, included with the accessory, that is fitted with a silica window. Examine viscous or opaque liquids in a 10 mm or smaller cuvette. Films, cloths, and paper samples are measured directly. Some applications that require the use of this accessory are research work on phosphor and measuring the stability of polymers and properties of optical brighteners. Front Surface Accessory For holding films, blocks, powders, and turbid samples. Includes: Two Holders with Synthetic, Fused-silica Windows ( ). Position externally adjustable for optimizing sensitivity LC Flowcell and Sipper Accessory LC Flowcell Accessory Although the instrument has a built-in flowcell, the inlet and outlet tubing have too large a diameter for it to be used for high-resolution HPLC. This can be overcome by replacing the standard flowcell assembly with an LC flowcell accessory. Includes: Flowcell, Square Section, Synthetic, Fused Silica, 1.3 mm (L ); 16 µl volume, 0.4 mm FEP Inlet Tube (L ); and 0.7 mm FEP Outlet Tube (L ). L Inlet Tube, 0.4 mm i.d. FEP inlet tube. L Outlet Tube, 0.7 mm i.d. FEP outlet tube. L Inlet Tube, 0.7 mm i.d. L Outlet Tube, 1.0 mm i.d. L Manifold Pump Tubing Powder Sample Holder For use with Front Surface Accessory ( ) Synthetic Fused Silica Window For Powder Sample Holder

33 Canada LS 55/50B Sampling Accessories FLR-27 Low-temperature Luminescence Accessory For the Model LS 55/50B Series Easily replaces the standard sample compartment for the analysis of samples at the temperature of liquid nitrogen Cools more efficiently and uses less sample than conventional quartz Dewars Used for measuring fluorescence or phosphorescence Samples can be measured at the temperature of liquid nitrogen by placing them in synthetic fused silica tubes which have an internal diameter of 2 mm, an outer diameter of 4 mm, and a length of 75 mm. The tubes are cooled by conduction by placing them in contact with the end of a high-purity copper rod which itself is immersed in liquid nitrogen. The position of the tube is reproducible and the samples cool rapidly. Frosting of the cell is minimized by purging the sample compartment with a flow of dry nitrogen gas. The Model LS 55/50B Series uses a pulsed Xenon lamp as a source of excitation. Fluorescence data are collected at the instant of the flash while phosphorescence data are collected in the dark period between each flash. The use of the pulsed Xenon lamp obviates the need for a mechanical means of chopping the excitation and emission beams, thus leading to improved precision and speed of analysis. The instrument software includes application programs for observing short (msec) and long (seconds) phosphorescence decay curves in addition to spectra. Low-temperature Luminescence Accessory For cooling samples to liquid nitrogen temperature. Used for measuring fluorescence or phosphorescence. Includes a pack of five sample tubes ( ). L Low-temperature Sample Tubes (pkg. 5) Fast Filter Wheel Accessory The Fast Filter Wheel Accessory, is used for rapid collection of data in the study of biochemical processes such as intracellular ion monitoring. Pairs of optical filters specifically designed for the indicator dyes are rapidly rotated in either the excitation or emission beam, allowing ratio measurement to be made every 40 msec. Two pairs of filters can be fitted on each wheel allowing for example, the simultaneous measurement of both calcium and ph using a pair of FURA-2 and BCECF filters. The Fast Filter Application Software, which is similar to the Intracellular Biochemistry program, is used to control the accessory. It provides the facility to set up methods, collect data, and calibrate the result. Either the ratio data or the individual intensities can be viewed in real time. The data are automatically saved as ASCII files and a full numerical report can be printed out. Fast Filter Wheel Accessory Kit for LS 55/50B Includes the Fast Filter Accessory Boards and Software (L ) and one Drive Unit (L ). Requires, but does not include, a filter set. Requires, but does not include, installation by a PerkinElmer Service Engineer. N Polarization Filter Kit Consists of two pairs of polarizing filters each set at 0 and 90 to the vertical. Enables polarization values to be obtained every 40 msec. Requires at least two Drive Units (L ). Requires, but does not include, installation by a PerkinElmer Service Engineer. L Fast Filter Wheel Accessory Drive Unit for LS 55/50B Requires, but does not include, a Fast Filter Accessory Board, Software (L ), and filter set. Requires, but does not include, installation by a PerkinElmer Service Engineer. L Filter Sets Filter Set FURA 2 (Excitation) L Filter Set BCECF (Excitation) L Filter Set SNAFL-2 (Emission) L Filter Set INDO-1 (Emission) L Filter Set SNARF-1 (Emission) L Intracellular Ion Filter Guide Filter/Dye nm Monochromator FURA 2 340/330 Excitation or 340/365 Excitation BCECF 495/440 Excitation SNAFL-2 514/550 Excitation INDO-1 405/480 Emission SNARF-1 530/640 Emission Notes: 1. If using FURA 2 and BCECF, which are both excitation dyes, one drive unit (L ) is required to fit on both pairs of filters. Both dyes can be monitored in the same experiment. 2. If using INDO-1 and BCECF, two drive units are necessary one for excitation and one for emission. Photomultiplier Sample Photomultiplier For measurements in the 200 to 650 nm range. L R928 Red-sensitive Photomultiplier For measurements over the 200 to 800 nm range Biokinetics Accessory Magnetically stirred single cell holder; water thermostatted. Includes a built-in temperature sensor (range 0 C to 100 C) and an event marker. Thermostattable by means of an external water bath (not included). Accommodates 10 mm pathlength cuvettes. Includes a pack of six Stirrer Fleas. L Fiber Optic Accessory Remote Fiber Optic Accessory Allows you to take the measurement at the sample rather than taking the sample to the instrument. Includes bifurcated synthetic fused-silica fiber optics (1 m long, 280 to 800 nm range) and optical mount to spectrometer. L Biokinetics Accessory

34 FLR-28 LS-45 Accessories US Sampling Accessories Single-position Thermostatted Cell Holder Cell holder for a 10 mm pathlength cell, water thermostatted. This cell holder is included with the instrument. L Total Emission Accessory Enhances sensitivity by automatically placing a mirror in front of the emission grating. Essential for highsensitivity bio- and chemiluminescence measurements using cuvette holder. Requires, but does not include installation by a PerkinElmer Service Engineer. The accessory must be used with a cut-off filter to prevent excitation light from falling on the sample detector, causing possible permanent damage. See Cut-off Filters below. L Front Surface Accessory For flat samples, powders, and turbid samples. Includes two Powder Holders ( ). Adjustable for optimizing sensitivity Powder Sample Holder Used with Front Surface Accessory ( ) Remote Fiber Optic Accessory Allows you to take the measurement at the sample rather than taking the sample to the instrument. Includes bifurcated synthetic fused silica fiber optics (1 m long, 280 to 800 nm range) and optical mount to spectrometer. L Excitation and Emission Polarizers Consists of two filter wheels, each with horizontal and vertical polarizer elements. Polarizer positions are software controlled and can be manually set or automatically controlled for polarization, anisotropy or G-factor. Requires, but does not include installation by a PerkinElmer Service Engineer. L Add-on Software Application Short Phosphorescence Decay Routine for collecting decay data and calculating single or dual exponential lifetimes. L225B005 Autosampler System Autosampler System consisting of AS-93 Plus Autosampler, Flowcell and Autosampler software program. L Photomultiplier Sample Photomultiplier For measurements in the 200 to 650 nm range. L R928 Red-sensitive Sample Photomultiplier For measurements up to 900 nm Synthetic Fused Silica Window For Powder Sample Holder LC Flow Cell Accessory Includes: Flowcell, Square Section, Synthetic, Fused Silica 1.3 mm, 16 µl volume (L ); 0.4 mm FEP Inlet Tube (L ); and 0.7 mm FEP Outlet Tube (L ). L mm i.d. FEP Inlet Tube to Flow Cell Used as inlet tube for L L (pkg. 5) Cut-off Filters Description UV-29 filter, 2" x 2", passes light above 290 nm UV-31 filter, 2" x 2", passes light above 310 nm UV-35 filter, 2" x 2", passes light above 350 nm UV-39 filter, 2" x 2", passes light above 390 nm UV-43 filter, 2" x 2", passes light above 430 nm UV-53 filter, 2" x 2", passes light above 530 nm. L mm i.d. FEP Tube Used as outlet tube for L and inlet tube for L L

35 Canada High efficiency Thermostattable No birefringence effects Easy to fill, easy to empty, with no loss of sample Fit all PerkinElmer Polarimeters (Models 141, 241, 241 MC, 243, 341, and 343) Use PerkinElmer polarimetry cells to maintain the high level of accuracy and precision of your PerkinElmer Polarimeter. They are manufactured by a special process in which the windows are fused to the cell bodies to ensure that they are free of tension. Because the windows are not mechanically inserted, birefringence effects, which could affect the accuracy of your reading, are eliminated. To make PerkinElmer cells easy to identify, a defined pathlength is engraved on each cell. All cells are jacketed for thermostatting with constant temperature water, except for one flowcell. Cells are designed for easy filling and emptying, with no loss of sample. The filling ports are arranged so that liquid flows over the inner window surfaces. In addition to the cells listed here, a wide variety of cells made of fused silica are available. These cells are used for measurements of optical rotation in the ultraviolet range or at elevated temperatures. Secondary Standards for Polarimeter Instrument Performance Validation Quartz Control Plate +1 at 589 nm Thermostattable housing, nominal rotation +1 to 589 nm (NaD). B Quartz Control Plate -1 at 589 nm Thermostattable housing, nominal rotation -1 to 589 nm (NaD). B Coupling, Pluggable Female B Male B Polarimeter Cells Description Polarimetry Source Lamps, Cells, and Supplies Source Lamps for PerkinElmer Polarimeters High-quality source lamps, specifically selected to optimize the performance of all PerkinElmer Polarimeters, offer high radiant energy and a long operating lifetime. As a result, precise measurements of optical rotation can be made, even when the sample absorbs strongly. Description Sodium Lamp, for all Models B Mercury Vapor Lamp; for 141, 241, 241 MC B Mercury Vapor Lamp, for 341, 343 plus Standard 100 mm 6.2 ml Glass B Semi-micro 100 mm 3.0 ml Fused Silica B Microcell 100 mm 1.0 ml Glass B Short-path 10 mm 0.5 ml Glass B Short-path 1 mm 0.25 ml Glass B Microcell 100 mm 1.0 ml Fused Silica B Flowcell 100 mm 5.0 ml Glass B B Micro Flowcell 100 mm 40.0 µl Fused Silica B * *Non-thermostattable PLR-29

36 Index

37 IND-2 Index US IR GC-19, GC-31, GC-34, GC-35, GC-36, GC GC GC-18, GC LC TEA GC GC GC-32, GC GC GC GC LC LC LC-12, GC GC GC GC GC GC GC GC AA AA AA AA AA LC LC TEA GC-98, TEA GC-98, TEA GC-98, TEA LC-29, LC LC LC LC-29, LC LC LC AA AA ICP ICP , ICP ICP ICP AA-10, AA , ICP , ICP , , AA-10, AA ICP ICP ICP-13, ICP-14, ICP ICP ICP ICP-9, ICP ICP-13, ICP ICP-8, ICP ICP-5, ICP-15, ICP ICP-5, ICP-15, ICP ICP GC-98, TEA AA AA-10, AA-11, AA AA AA-10, AA AA-10, AA-11, AA AA-10, AA AA AA-10, AA AA LC LC LC LC LC-6, LC-8, LC-9, LC LC LC LC TEA TEA GC-98, TEA TEA IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR TEA TEA-2, TEA-3, TEA TEA-2, TEA TEA TEA-2, TEA TEA-2, TEA-4, TEA-7, TEA-15, TEA TEA-2, TEA-4, TEA-6, TEA TEA TEA-2, TEA-6, TEA-4, TEA TEA TEA-31, TEA TEA TEA TEA TEA TEA TEA TEA TEA TEA TEA-40, TEA TEA TEA-40, TEA TEA-38, TEA TEA TEA TEA-38, TEA TEA-38, TEA TEA TEA TEA TEA-40, TEA TEA-40, TEA TEA-40, TEA TEA TEA TEA TEA-41, TEA TEA TEA TEA-40, TEA TEA-38, TEA TEA TEA GC GC GC LC-12, GC-86, ICP LC-3, LC ICP-9, ICP-10, ICP ICP-9, ICP-10, ICP GC ICP ICP-11, ICP TEA-23, TEA-27, TEA-29, TEA-30, TEA AA IR ICP , IR-12, IR-13, IR IR ICP LC LC-8, LC-9, LC-7, LC-7, LC-8, LC-9, LC-6, LC-8, LC-9, LC LC LC-8, LC-9, LC LC LC LC-4, LC LC-46

38 Canada Index IND LC-6, LC-8, LC-9, LC LC-7, LC-8, LC-9, LC-8, LC-9, LC-7, LC-8, LC-9, LC LC LC LC LC-28, LC-37, LC LC-28, LC-38, LC-39, LC-41, LC LC-28, LC-37, LC LC-28, LC-36, LC-39, LC LC LC LC-28, LC LC-28, LC LC LC LC FLR FLR FLR FLR FLR LC LC LC LC LC LC LC LC LC LC LC ICP AA TEA AA-11, AA AA AA ICP ICP AA AA AA AA AA AA , ICP AA AA AA AA AA AA AA AA AA , ICP ICP AA AA TEA TEA-2, TEA TEA-2, TEA TEA-2, TEA TEA-2, TEA TEA TEA TEA-10, TEA TEA TEA TEA-10, TEA TEA TEA TEA TEA TEA TEA-2, TEA-4, TEA TEA-4, TEA TEA TEA TEA TEA TEA TEA TEA TEA TEA TEA TEA TEA TEA GC GC LC-2, GC GC GC GC-15, GC GC GC GC GC-23, GC GC GC-38, GC GC GC GC GC GC GC GC GC-23, GC GC GC GC GC GC GC GC GC GC GC GC GC GC GC GC GC GC GC GC GC GC GC GC FLR LC LC LC TEA TEA TEA TEA TEA TEA-22, TEA TEA TEA TEA TEA TEA TEA TEA TEA TEA TEA TEA TEA TEA-2, TEA TEA-2, TEA TEA TEA GC LC IR IR IR IR-2, IR-2, IR-2, IR GC-10, IR IR-4, IR IR FLR-23, LC GC-9, IR IR LC GC GC GC-9, GC LC LC LC GC FLR GC IR IR IR GC IR FLR-22, FLR IR IR IR IR IR LC LC LC LC LC LC LC LC LC-26

39 IND-4 Index US LC LC-26, LC-42, LC-43, LC LC LC LC LC LC-26, LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC-26, LC LC LC LC LC LC LC LC LC-26, LC LC LC LC LC-26, LC-36, LC LC LC-26, LC LC LC LC-26, LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC-30, LC LC LC-31, LC LC-31, LC LC LC LC LC-26, LC-30, LC LC-26, LC LC-26, LC LC-29, LC LC LC-29, LC LC LC LC LC LC LC LC LC LC-28, LC LC-28, LC LC-28, LC LC LC LC LC LC LC-13, LC TEA ICP AA ICP-7, ICP GC GC AA-15, ICP-9, ICP LC-7, LC ICP-8, ICP TEA TEA AA-14, TEA TEA LC-7, LC-8, LC-9, TEA-16, TEA TEA GC AA-10, AA ICP ICP-13, ICP ICP-7, ICP-9, ICP-10, ICP-13, ICP TEA-16, TEA TEA TEA TEA ICP-9, ICP AA ICP AA-10, AA AA AA-10, AA TEA GC-40, ICP-7, ICP-9, ICP-10, ICP-11, ICP AA TEA ICP TEA ICP-9, ICP-10, ICP-11, ICP ICP ICP GC-17, GC GC GC GC ICP TEA-33, TEA ICP GC LC-3, LC GC-15, GC-20, GC GC GC ICP TEA TEA-33, TEA-36, ICP LC LC IR-13, LC-3, LC TEA TEA GC-5, GC GC-20, GC-27, GC-82, GC LC GC LC LC LC LC GC LC GC LC ICP LC LC LC LC LC LC LC LC-49, GC LC-49, GC LC , ICP , ICP-5, ICP-6

40 Canada Index IND LC-6, LC-8, LC-9, LC LC LC LC LC-49, GC LC LC LC LC LC LC LC LC LC ICP-4, ICP TEA-9,, ICP TEA-15, TEA , ICP , ICP LC-13, LC-14, LC-16, LC GC GC TEA TEA GC TEA LC-7, LC-8, LC-9, LC-7, LC-8, LC-9, LC-7, LC-8, LC-9, LC-7, LC LC-7, LC-8, LC-9, LC-7, LC-8, LC-9, GC TEA GC GC TEA TEA-10, TEA-14, TEA-15, TEA AA-15, ICP-5, ICP-8, ICP TEA TEA GC-30, TEA-14, TEA-15, TEA-22, TEA-32, TEA TEA-2, TEA ICP ICP-4, ICP-6, ICP-15, ICP TEA ICP TEA GC-10, TEA-23, TEA-26, TEA GC ICP ICP GC-5, GC-27, GC-29, GC-30, GC GC-15, GC-27, GC-29, GC-30, GC GC-19, GC-20, GC-27, GC-29, GC-30, GC-82, GC ICP-9, ICP LC-5, LC-5, GC-5, GC-29, GC GC-15, GC GC-19, GC-20, GC-82, GC ICP-8, ICP ICP-11, ICP GC-15, GC LC LC LC TEA LC IR GC-27, GC LC-3, LC ICP-8, ICP ICP ICP ICP-8, ICP ICP , IR-12, IR-13, IR , IR-12, IR-13, IR ICP ICP GC LC GC ICP GC TEA TEA ICP IR AA ICP-8, ICP ICP TEA GC GC TEA GC AA-14, AA LC LC LC LC LC LC-3, IR LC-7, LC LC-7, LC TEA GC GC GC GC GC AA IR-13, IR GC GC GC GC GC ICP LC-13, LC GC GC LC LC-8, LC TEA LC-9, LC GC-36, GC-38, GC LC LC LC-6, LC LC ICP-9, ICP GC-40, GC FLR-27, FLR-28, LC , ICP TEA-16, TEA ICP AA-15, GC-86, ICP-5, ICP-8, ICP-15, ICP ICP ICP-10, ICP ICP TEA TEA ICP LC-22, GC LC-22, GC LC-22, GC LC-22, GC LC-22, GC GC ICP ICP-5, ICP LC GC-27

41 IND-6 Index US LC LC LC LC LC LC LC LC LC LC LC-13, LC-17, LC LC-13, LC-17, LC LC LC-13, LC LC-13, LC-17, LC LC LC LC LC-13, LC-17, LC LC-17, LC LC-13, LC-17, LC LC-13, LC LC-17, LC LC LC-17, LC LC LC LC LC-13, LC LC-13, LC LC-13, LC LC LC IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR FLR FLR-26, FLR FLR-26, FLR FLR-26, FLR FLR FLR FLR GC GC LC-13, LC-17, LC LC-13, LC-17, LC LC LC LC LC LC-23, GC LC-23, GC LC-23, GC LC-23, GC LC LC GC GC GC GC GC GC GC GC GC GC GC GC LC-13, LC-17, LC LC LC LC LC-22, GC LC-22, GC LC-22, GC-46 B FLR-29 B FLR-29 B FLR-29 B FLR-29 B FLR-29 B , 8 B , 1, 2, ICP-11 B FLR-29 B FLR-29 B FLR-29 B FLR-29 B , 8, ICP-5, ICP-6 B B FLR-29 B AA-14 B B B AA-10, AA-12 B AA-19 B , 0, 2, B LC-5 B AA-14 B IR-6 B AA-19, 6, 2, TEA-11 B B AA-17 B AA-19 B UV-14, UV-18 B AA-17 B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B UV-19 6 UV-6 UV-6 UV-6 AA-19 UV-11, UV-19 UV UV-7 AA-17, ICP-25 UV-19 LC-5 LC-4, LC-5 LC-4, LC AA FLR-29 FLR GC-3 GC-3 GC-3 B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B GC-3 GC-3 GC-3 GC-3 AA-19 ICP-25 AA-17 LC-4, LC-5, 2 LC-4, LC-5, 2 FLR-29 AA-16 AA-16 UV-11, UV-17 AA-16 UV-19 AA-19 AA-18 LC-5 2 AA-17 LC-4, LC-5 AA-9 AA-18 AA GC-7 GC-7 GC-7 GC-5, GC-7 GC-7 GC-7 1 LC-4, LC-5 AA-17, ICP-25

42 Index IND-7 B AA-16 B AA-16 B UV-13, UV-18 B TEA-12 B TEA-2, TEA-6, TEA-7, TEA-15 B TEA-6 B TEA-6 B TEA-12 B TEA-12 B ICP-25 B TEA-12 B TEA-12 B TEA-6 B TEA-6 B TEA-6 B TEA-2, TEA-6 B TEA-2, TEA-6 B TEA-2, TEA-6 B TEA-2, TEA-6 B TEA-2, TEA-6 B TEA-2, TEA-6 B TEA-2, TEA-6 B TEA-12 B GC-5, GC-7 B TEA-6, TEA-7, TEA-15 B TEA-6 B GC-7 B AA-9 B AA-14 B AA-12 B AA-12 B GC-4 B UV-6 B LC-4 B LC-4 B LC-4 B ICP-25 B AA-12 B AA-6 B AA-12 B AA-12 B AA-12 B AA-12 B GC-3 B GC-3 B UV-19, LC-16 B AA-12 B AA-12 B AA-12 B LC-4 B AA-15 B GC-6 B TEA-2, TEA-6 B TEA-2, TEA-6 B TEA-2, TEA-6 B LC-4, LC-5 B LC-4, LC-5 B LC-16 B AA-12 B AA-15 B AA-18 B AA-18 B TEA-11 B TEA-11 B TEA-11 B TEA-11 B TEA-11 B TEA-11 B TEA-11 B UV-11 B B B TEA-11 B TEA-2, TEA-5 B TEA-2, TEA-5 B TEA-2, TEA-5 B TEA-2, TEA-5 B TEA-5 B TEA-12 B GC-6 B TEA-5 B UV-7 B UV-19 B LC-4 B LC-4 B LC-4 B LC-4 B TEA-11 B UV-19 B B UV-11 B AA-17, 0 B AA-17, 0 B AA-15 B , 0, 1, 2 B , 8, 0, 1, 2 B , 8, 0, ICP-24 B B B UV-17 B , 0 B , 0, 1 B UV-18, 3, B UV-18, 3, B UV-18, 3, B , 9, 0, 1 B LC-4 B UV-7 B , 0 B LC-4, LC-5 B B LC-4 B B , 0 B , 0 B , 1 B , 1 B , 0 B TEA-2, TEA-11 B B UV-15, UV-19 B , ICP-24 B , ICP-24 B B GC-6 B GC-6 B B LC-4 B LC-4 B UV-11, UV-17 B TEA-11 B B TEA-42 B , 0, 2 B , 1 B , 1 B B GC-3, GC-5, GC-7 B , 1 B LC-4 B , 1 B UV-17, 7, 0 B B B TEA-7 B B B TEA-7 B TEA-7 B B GC-6 B GC-3, GC-5 B GC-5, GC-6 B TEA-7 B UV-6 B GC-5 B GC-5 B , 0, 1 B AA-13 B AA-13 B AA-13 B AA-13 B , ICP-24 B , B B B , B UV-14 B B B GC-3 B , 1 B , 1 B B B B , 2 B B B B B , 1 B B B B B GC-5 B B B B UV-6 B AA-13, AA Canada

43 Index IND US B GC-6 B GC-6 B UV-14 B B TEA-6 B GC-6 B AA-13 B GC-6 B UV-14 B AA-13 B AA-13 B AA-13 B GC-3, GC-6 B B GC-6 B LC-1, LC-4 B UV-11, UV-19 B B GC-4 B , B GC-4 B GC-4 B , 0, 1 B B GC-4 B LC-4 B GC-4 B AA-13 B AA-13 B B B B B , 0 B UV-19 B FLR-29 B B B , 1 B B B B B B UV-9 B , 0, 1 B , 9 B , 9, B B B GC-4 B GC-4 B B , 2 B B B B B , 0 B ICP-25 B ICP-25 B ICP-25 B , B GC-4 B B GC-4 B B UV-18, 3, B , B TEA-6 B B , 0, 1 B UV-6 B B UV-19 B , B , B UV-15 B B , B B B UV-19 B GC-5 B UV-8 B B B B B UV-8 B B AA-9, 2 B FLR-29 B GC-6 B GC-6 B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B , 2 B B B B B B , 2 B B B B B B UV-1 B UV-1 B UV-1 B UV-1 B UV-1 B UV-1 B UV-1 B UV-1 B UV-1 B UV-1 B UV-1 B UV-1 B UV-1, B UV-1, B UV-1, B UV-1, B UV-1, B UV-1, B UV-1 B UV-1 B UV-1 B UV-1 B UV-1 B UV-1 B UV-1 B UV-1 B UV-1 B UV-1 B UV-1, B UV-1, B UV-1, B UV-1, B UV-1, B UV-1, B UV-3 B UV-3 B UV-3, B UV-3 B UV-3 B UV-3 B UV-3 B UV-3, B UV-3, B UV-3 B UV-3 B UV-3, B UV-3 B UV-3 B UV-3, B UV-3, B UV-2 B UV-2 B UV-2 B UV-2 B UV-2, B UV-2 B UV-2 B UV-2 B UV-2 B UV-2 B UV-4 B UV-4 B UV-4, UV-11, UV-17 B UV-4, UV-17 B UV-4 B UV-4 B UV-4 B UV-4 B UV-4 B UV-4 B UV-4 B UV-4 B UV-4 B UV-4 B UV-4, B UV-4,

44 Index IND-9 B UV-4, B UV-4, B FLR-20 B FLR-20 B FLR-20 B FLR-20 B FLR-20 B FLR-20 B FLR-20 B FLR-20 B FLR-21 B FLR-21 B FLR-21 B FLR-21 B FLR-21 B FLR-21 B FLR-22 B FLR-22 B FLR-22 B UV-5, B UV-5, B UV-5 B UV-5 B FLR-22 B FLR-22 B UV-1 B FLR-21 B UV-5, B UV-5, B UV-5, B UV-5, B UV-5, B UV-5, B UV-4 B UV-4 B UV-4 B ICP-5 B UV-7 B UV-7 B UV-7 B UV-7 B UV-11, UV-17 B UV-11, UV-17 B UV-11, UV-17 B UV-14 B UV-14 B UV-7 B UV-15 B UV-7 B UV-7 B UV-7 B UV-7 B UV-7 B UV-7 B UV-9 B UV-9 B UV-11, UV-17 B UV-5 B UV-5 B B B ICP-24 B , B , B , B , B , ICP-24 B , ICP-24 B , ICP-24 B , ICP-24 B , ICP-24 B , ICP-24 B B B B B B B B AA-17 B B B B B AA-9 B AA-19 B AA-19 B AA-16 B AA-16 B AA-17 B AA-17 B B B B B B B B B UV-18, 3, B ICP-24 B , ICP-24 B , ICP-24 B , ICP-24 B B B B B B B B B B B AA-18, 0 B AA-18 B AA-18 B B B B B B B B B B B , 2 B B B B B B UV-18, 3, B UV-18, 3, B UV-18, 3, B , B B , B , B B B , B UV-18 B B AA-19 B GC-5 B GC-4 B GC-3 B GC-3 B GC-3 B GC-4 B GC-6 B GC-5, GC-6 B GC-6 C GC-98 C GC-98 C UV-6 C UV-19, AA-9 C UV-19 C TEA-14 C TEA-44 C TEA-14 C TEA-14 C TEA-14 C UV-19 C UV-19 C UV-18 C UV-12 C UV-17 CP UV-7 CP TEA-44 CP TEA-44 CP FLR-23 CP FLR-23 CP FLR-23 CP TEA-16 E GC-27 E GC-27 E GC-27 E GC-27 E GC-27 E GC-27 E GC-27 E GC-27 E GC-27 E GC-27 E GC-27 E GC-27 E GC-27 E GC-27 E GC-27 E GC-27 E GC-27 E GC-27 E GC-27 E GC-27 E GC-27 E GC-27 E GC-28 E GC-28 E GC-28 E GC-27 ED LC-45 ED LC-45 ED LC-46 ED LC-46 EDO20015 LC-46 L IR-6 L IR-20 L IR-20 L IR-20 L IR-20 L IR-20 L IR-20 L IR-20 L IR-20 L IR-20 L IR-20 L IR-20 L IR Canada

45 Index IND US L IR-15 L IR-15 L IR-15 L IR-15 L IR-15 L IR-7 L IR-13 L IR-12, IR-13 L IR-12, IR-13 L IR-12, IR-13 L IR-8 L IR-12, IR-13 L L L L L IR-12, IR-13 L IR-12, IR-13 L IR-13 L IR-13 L IR-12, IR-13 L IR-12, IR-13 L IR-12 L IR-12, IR-13 L IR-13 L IR-13, IR-19 L IR-13, IR-19 L IR-13, IR-19 L IR-13, IR-19 L IR-19 L IR-13, IR-19 L IR-19 L IR-19 L IR-19 L IR-13 L IR-13 L IR-13 L IR-13 L IR-13 L IR-13 L IR-13 L IR-13 L IR-13, IR-19 L IR-10 L IR-10 L IR-7, IR-11 L IR-10 L IR-11 L IR-10 L IR-10 L IR-10 L IR-10, IR-11 L IR-10 L IR-10 L IR-10 L IR-12 L L L L L L L IR-10 L IR-10 L L L L L L L L L L L L L L L L L L L IR-10 L IR-10 L L L L IR-17 L IR-17 L IR-12 L IR-19 L IR-19 L IR-19 L IR-19 L IR-19 L IR-19 L IR-19 L IR-19 L IR-19 L IR-19 L IR-19 L IR-19 L IR-19 L IR-12 L IR-12 L IR-12 L L L L L L , IR-12 L L L L L IR-12 L IR-12 L IR-12 L IR-11 L IR-11 L IR-11 L IR-12 L IR-12 L IR-12 L IR-12 L IR-12 L IR-12 L IR-11 L IR-11 L IR-11 L IR-12 L L L L L L L L L IR-6 L IR-6 L IR-2, L L IR-2 L L L L L L L L L L L L L L L L L L IR-2 L L L L IR-4 L IR-4 L IR-4 L IR-4 L IR-4 L IR-4 L IR-4 L IR-4 L IR-4 L IR-4 L IR-4 L IR-4 L IR-4 L IR-4 L IR-4 L IR-4 L IR-4 L IR-4 L IR-4 L IR-2, L IR-17 L IR-17 L , IR-17 L L IR-8 L IR-8 L IR-8 L IR-2 L L L L L L IR-2 L IR-2 L IR-2 L IR-2 L IR-2 L IR-17 L IR-17 L IR-17 L , IR-17 L , IR-17 L IR-19 L IR-14 L IR-14 L IR-14 L IR-14 L IR-14 L IR-14 L IR-14 L IR-14 L IR-14 L IR-14 L IR-14 L IR-14 L IR-15 L IR-17 L IR-17 L IR-17 L IR-17 L IR-17 L IR-17 L IR-17 L IR-17 L IR-17 L IR-17 L IR-17 L IR-17 L IR-17

46 Index IND-11 L IR-17 L IR-18 L IR-18 L IR-18 L IR-18 L IR-18 L IR-18 L IR-18 L IR-18 L IR-19 L FLR-23 L FLR-28 L FLR-26, FLR-28 L FLR-26, FLR-28 L FLR-26 L FLR-25 L FLR-27 L FLR-27 L FLR-27 L FLR-27 L FLR-27 L FLR-27 L FLR-25 L FLR-28 L FLR-25, FLR-28 L FLR-25 L FLR-26 L FLR-26, FLR-28 L FLR-21, FLR-25 L FLR-25, FLR-28 L FLR-25 L FLR-27, FLR-28 L FLR-27 L FLR-27 L FLR-24 L FLR-24 L FLR-24, FLR-28 L FLR-23, LC-15 L FLR-26 L FLR-23 L FLR-27, FLR-28 L FLR-25 L FLR-25 L225B001 FLR-24 L225B003 FLR-24 L225B005 FLR-24, FLR-28 L LC-15 L FLR-26 L LC-15 L LC-15 L LC-14, LC-15 L GC-9 L GC-10, L GC-9, GC-10, L GC-10, L GC-9, L GC-9, L GC-9 L GC-10, L L GC-18 L GC-33 L GC-18, GC-20 L GC-33, GC-37, GC-41 L GC-33, GC-37 L GC-33 L GC-18 L GC-40 L GC-37 L GC-18 L GC-33 L GC-13 L GC-13 L GC-11, GC-13 L GC-13 L GC-13 L GC-13 L L L L L L GC-10, L GC-10, L GC-13 L GC-9, L GC-9, GC-11, GC-13 L GC-9, GC-11, GC-13 L GC-11, GC-13 L GC-13 L GC-11, GC-13 L GC-9, GC-13 L GC-14 L GC-13 L GC-13 L GC-13 L GC-13, GC-14 L GC-11, GC-13 L GC-14 L GC-14 L GC-14 L GC-14 L GC-14 L GC-37 L GC-33 L IR-18 L GC-81 L LC-5 L UV-9 L UV-9 L UV-17 L UV-17 L UV-17 L UV-11 L UV-8 L UV-11, UV-17 L UV-11, UV-17 L UV-11, UV-17 L UV-11, UV-17 L UV-11, UV-17 L UV-11, UV-17 L UV-8 L UV-8 L UV-16 L UV-16 L UV-16 L , IR-12 L IR-12 L IR-12 M GC-9 M GC-11 M GC-11 M GC-4 M GC-11 M GC-4 M GC-11 M GC-9 M GC-4 M GC-4 M GC-5 M GC-5 M GC-5 M GC-5 M GC-5, GC-11 M GC-4, GC-11 M GC-11 M GC-11 M GC-11 M GC-11 M GC-4 M GC-4 M GC-9, GC-10 M GC-10 M GC-10 M GC-9 M GC-9, GC-10 M GC-9 M GC-9, GC-11 M GC-11, GC-14 M GC-11 M GC-9 M GC-9 M GC-9 M GC-9 M GC-4, GC-11 N IR-10, IR-11 N TEA-7 N AA-9 N AA-11 N AA-10 N AA-15 N AA-15 N AA-15 N AA-15 N AA-15 N AA-15 N AA-15 N AA-15 N AA-15 N AA-15 N AA-10 N AA-10 N AA-10 N AA-10 N AA-14, AA-15 N AA-10 N N ICP-14 N ICP-14 N ICP-16 N ICP-16 N ICP-16 N ICP-16 N ICP-13 N N ICP-9 N ICP-16 N ICP-13 N ICP-13 N , ICP-24 N ICP-15 N ICP-13 N ICP-3 N ICP-22, ICP-19 N ICP-6, ICP-16 N ICP-14 N ICP-9 N ICP-9 N ICP-26, ICP Canada

47 Index IND US N ICP-7, ICP-9, ICP-13 N ICP-7, ICP-13 N ICP-7, ICP-13 N ICP-13, ICP-14, ICP-16 N ICP-13, ICP-20 N , ICP-6 N ICP-9, ICP-11, ICP-15 N ICP-15 N ICP-22 N ICP-16 N ICP-16 N ICP-16 N ICP-15 N AA-6 N AA-6 N ICP-16 N ICP-13 N ICP-16 N ICP-4, ICP-6, ICP-15, ICP-19 N ICP-4, ICP-15, ICP-19 N ICP-8, ICP-9 N ICP-3 N ICP-3 N ICP-19, ICP-22 N ICP-16 N ICP-27 N ICP-3 N ICP-27 N ICP-7, ICP-13, N ICP-8 N ICP-13 N ICP-4 N ICP-4 N ICP-4, ICP-6 N ICP-12 N ICP-11 N ICP-4 N ICP-9 N ICP-16 N ICP-9 N ICP-8, ICP-9, ICP-10 N ICP-9 N ICP-12 N ICP-12 N ICP-12 N ICP-6 N ICP-8 N ICP-12 N ICP-16 N ICP-3 N ICP-4, ICP-6 N ICP-4, ICP-11 N ICP-3, ICP-8, ICP-22 N ICP-11 N ICP-10 N ICP-8, ICP-15 N ICP-10 N ICP-5, ICP-12 N ICP-16 N ICP-10 N ICP-12 N ICP-5, ICP-6 N ICP-26 N ICP-26 N ICP-26 N ICP-5 N ICP-7 N ICP-6 N ICP-6 N ICP-21 N ICP-24 N ICP-24 N ICP-21 N ICP-21 N ICP-9 N ICP-12 N ICP-9 N ICP-11 N ICP-9 N ICP-9 N ICP-12 N ICP-9 N ICP-7 N ICP-7, ICP-10 N ICP-10 N ICP-11 N ICP-10 N ICP-15 N ICP-10, ICP-12 N ICP-11 N ICP-11 N ICP-11 N ICP-7 N ICP-7 N ICP-7 N ICP-7 N ICP-7 N ICP-7, ICP-11 N ICP-7 N ICP-5, ICP-12 N ICP-5, ICP-12 N ICP-5, ICP-12 N ICP-5, ICP-12 N ICP-12 N ICP-12 N ICP-12 N ICP-12 N ICP-15 N ICP-7 N ICP-7, N ICP-5 N ICP-4 N ICP-2 N ICP-2 N ICP-2 N ICP-4 N ICP-3 N ICP-5 N ICP-2 N ICP-2 N ICP-3 N ICP-2 N ICP-3, ICP-4 N ICP-2 N ICP-2 N ICP-4 N ICP-2 N ICP-4 N ICP-5 N ICP-5 N ICP-3 N ICP-3 N ICP-5 N ICP-3 N ICP-3 N ICP-3 N ICP-3 N ICP-3 N ICP-3 N ICP-3 N ICP-4 N ICP-2 N ICP-4 N ICP-4 N LC-45 N LC-45 N LC-48 N LC-11 N LC-11 N GC-6 N GC-6 N GC-6 N UV-10 N UV-10 N UV-10 N UV-8 N UV-8 N UV-7 N UV-7 N UV-7 N GC-3, GC-6 N GC-4 N GC-4 N UV-8 N UV-13 N UV-13 N UV-13 N UV-13 N UV-13 N UV-13 N UV-19 N UV-19 N UV-19 N UV-19 N UV-19 N IR-18 N FLR-27 N LC-14, LC-16 N LC-16 N LC-16 N LC-14, LC-16 N N TEA-43 N TEA-44 N TEA-40, TEA-43 N TEA-42 N TEA-36 N TEA-37 N TEA-37 N TEA-42 N TEA-43 N TEA-43 N TEA-43 N TEA-43 N TEA-33, TEA-36 N TEA-36 N TEA-33 N TEA-33 N TEA-44 N TEA-44 N TEA-43 N TEA-40 N TEA-43 N TEA-37 N TEA-38 N TEA-42 N TEA-40 N TEA-44 N TEA-40, TEA-43 N TEA-38 N TEA-40, TEA-43 N TEA-43 N TEA-37

48 Index IND-13 N TEA-43 N TEA-43 N TEA-40, TEA-43 N TEA-33 N TEA-33 N TEA-40 N TEA-40 N TEA-43 N TEA-41 N TEA-41 N TEA-38 N TEA-38 N TEA-44 N TEA-37, TEA-40 N TEA-42 N TEA-41 N TEA-37 N TEA-42 N TEA-40, TEA-43 N TEA-44 N TEA-37 N TEA-37, TEA-40 N TEA-43 N TEA-38 N TEA-38 N TEA-39, TEA-40 N TEA-42 N TEA-42 N TEA-42 N TEA-41 N TEA-40 N TEA-37 N TEA-37, TEA-40 N TEA-43 N TEA-40, TEA-44 N TEA-38 N TEA-37 N LC-30 N LC-30 N LC-30 N LC-30 N LC-30 N LC-30 N LC-30 N LC-30 N LC-30 N LC-30 N LC-30 N LC-30, LC-33 N LC-30 N LC-8, LC-9, N LC-12 N LC-3, LC-12 N LC-7, LC-8, LC-9, N LC-7, LC-8, LC-9, N LC-8, LC-9 N LC-7, LC-8, LC-9, N LC-7, LC-8, LC-9, N LC-12 N LC-9 N LC-6, LC-8, LC-9, N LC-6, LC-8, LC-9, N LC-12 N LC-6, LC-8, LC-9, N LC-6, LC-8, LC-9, N LC-12 N LC-12 N LC-12 N LC-12 N LC-12 N LC-12 N LC-12 N LC-12 N LC-12 N LC-12 N LC-12 N LC-12 N LC-12 N LC-12 N LC-45 N LC-7, LC-8 N LC-12 N LC-12 N LC-6, LC-8, LC-9, N LC-6, LC-8, LC-9, N LC-45 N LC-12 N LC-6, LC-8, LC-9, N LC-16 N LC-16 N LC-6 N LC-6 N LC-6 N LC-6 N LC-6 N LC-6 N LC-6 N LC-6 N LC-6 N LC-7 N LC-7 N LC-13 N LC-13 N LC-13, LC-17 N LC-13, LC-17 N LC-15 N LC-14 N LC-14 N LC-23 N LC-14 N LC-14 N LC-14 N LC-14 N LC-15 N LC-3 N LC-3 N LC-1 N LC-1 N LC-1 N LC-1 N LC-1 N LC-1 N LC-1 N LC-1 N LC-1 N LC-1 N LC-1 N LC-3 N LC-3 N LC-3 N LC-1 N LC-3, LC-23 N LC-3 N LC-23 N LC-3 N LC-48 N LC-3 N LC-3 N LC-1 N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N AA-6 N AA-6 N AA-6 N N N N N N N N N N N N N N N N Canada

49 Index IND US N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N AA-9 N AA-13 N AA-13 N AA-13 N AA-16 N AA-16 N N AA-17 N AA-13 N AA-13 N AA-14 N N N N N N N N N N N N N N N N N N N N N N N N N GC-98, TEA-44 N TEA-44 N LC-20, GC-44 N LC-20, GC-44 N LC-20, GC-44 N LC-20, GC-44 N LC-20, GC-44 N LC-20, GC-44 N LC-20, GC-44 N GC-47 N GC-47 N LC-22 N GC-47 N GC-47 N LC-22 N LC-20, GC-44 N LC-22, GC-47 N LC-20, GC-44 N LC-20, GC-44 N LC-22 N LC-22

50 Index IND-15 N LC-20, GC-44 N LC-20, GC-44 N LC-20, GC-44 N LC-20, GC-44 N LC-20, GC-44 N LC-20, GC-44 N LC-20, GC-44 N LC-20, GC-44 N GC-45 N GC-45 N LC-21 N LC-21 N LC-21, GC-45 N LC-21, GC-45 N LC-21, GC-45 N LC-21, GC-45 N LC-20, GC-44 N LC-20, GC-44 N TEA-18 N TEA-2, TEA-3 N TEA-8 N TEA-18 N TEA-17 N TEA-17 N TEA-16 N TEA-15 N TEA-8 N TEA-15 N TEA-34 N TEA-34 N TEA-34 N TEA-17 N TEA-17 N TEA-17 N TEA-16 N TEA-17 N TEA-17 N TEA-16 N TEA-8 N TEA-18 N TEA-16, TEA-17 N TEA-32 N TEA-24, TEA-31 N TEA-27, TEA-31 N TEA-24, TEA-31 N TEA-27, TEA-31 N TEA-31 N TEA-31 N TEA-32 N TEA-33 N TEA-8 N TEA-8 N TEA-15 N TEA-18 N TEA-15 N TEA-16 N TEA-16 N TEA-35 N TEA-24 N TEA-29, TEA-31 N TEA-29, TEA-31 N TEA-32 N TEA-27 N TEA-29, TEA-31 N TEA-18 N TEA-32 N TEA-31 N TEA-8 N TEA-10 N TEA-31 N TEA-8 N TEA-2, TEA-4, TEA-6, TEA-7, TEA-15 N TEA-18 N TEA-8 N TEA-8 N TEA-10 N TEA-17 N TEA-10 N TEA-15, TEA-18 N TEA-32 N TEA-27 N TEA-9 N TEA-24, TEA-27, TEA-31 N TEA-15 N TEA-9 N TEA-9 N TEA-26 N TEA-29, TEA-31 N TEA-32 N TEA-24 N TEA-8, TEA-10 N TEA-18, TEA-22 N TEA-8 N TEA-8, TEA-9 N TEA-31 N TEA-7 N TEA-8 N TEA-8 N TEA-18 N TEA-18 N TEA-20 N TEA-34 N TEA-18 N TEA-35 N TEA-8 N TEA-10 N TEA-9 N TEA-9 N TEA-9 N TEA-9 N TEA-7 N TEA-7 N TEA-15 N TEA-15 N TEA-9 N TEA-15 N TEA-15 N TEA-15 N TEA-15 N TEA-15 N TEA-8 N TEA-15 N TEA-15 N TEA-15 N TEA-15 N TEA-15 N TEA-19 N TEA-19 N TEA-19 N TEA-19 N TEA-19 N TEA-19 N TEA-19 N TEA-19 N TEA-21 N TEA-20 N TEA-21 N TEA-21 N TEA-20 N TEA-20 N TEA-19, TEA-20 N TEA-19, TEA-20 N TEA-19, TEA-20 N TEA-19, TEA-20 N TEA-19, TEA-20 N TEA-19, TEA-20 N TEA-19 N TEA-8 N TEA-8 N TEA-8 N TEA-10 N TEA-44 N TEA-44 N TEA-9 N TEA-9 N TEA-22 N TEA-22 N TEA-22 N TEA-22 N TEA-22 N TEA-22 N TEA-22 N TEA-22 N TEA-22 N TEA-22 N TEA-22 N TEA-22 N TEA-22 N TEA-26 N TEA-26 N TEA-30 N TEA-23, TEA-26, TEA-30 N TEA-23, TEA-26, TEA-28 N TEA-28 N TEA-26 N TEA-32 N TEA-30 N TEA-28 N TEA-23 N TEA-29 N TEA-24 N TEA-27 N TEA-27 N TEA-24 N TEA-32 N TEA-23 N TEA-23 N TEA-23 N TEA-23 N TEA-28 N TEA-28 N TEA-29 N TEA-30 N TEA-26, TEA-30 N TEA-30 N TEA-28 N TEA-28 N TEA-28 N TEA-26 N TEA-26 N TEA-26 N TEA-26 N TEA-26 N TEA-26 N TEA-26 N TEA-26 N TEA-26 N TEA-26 N TEA-25 N TEA-25 N TEA-25 N TEA-25 N TEA-25 N TEA-25 N TEA-25 N TEA-25 N TEA-25 N TEA-25 N TEA-25 N TEA Canada

51 Index IND US N TEA-25 N TEA-26 N TEA-28, TEA-30 N TEA-30 N TEA-23 N TEA-23 N TEA-26 N TEA-26 N TEA-32 N TEA-32 N TEA-26 N TEA-26 N TEA-32 N TEA-32 N TEA-27 N TEA-27 N TEA-27 N TEA-32 N TEA-27, TEA-31 N TEA-27 N TEA-32 N GC-33, GC-41 N GC-33 N GC-33 N GC-33, GC-37 N GC-33 N GC-18 N GC-20 N GC-20 N GC-33, GC-35, GC-37, GC-41 N GC-33, GC-35, GC-37, GC-41 N GC-18 N GC-35 N GC-41 N GC-41 N GC-40, GC-41 N GC-35 N GC-35 N GC-40, GC-41 N GC-18, GC-20 N GC-31, GC-32, GC-33, GC-37 N GC-33 N GC-33 N GC-33 N GC-37 N GC-18 N GC-37 N GC-18 N GC-18 N GC-18 N GC-18 N GC-24 N GC-24 N GC-24 N GC-24 N GC-24 N GC-24 N GC-24 N GC-40, GC-41 N GC-40, GC-41 N GC-20, GC-33, GC-37, GC-82 N GC-33 N GC-35 N GC-97 N GC-97 N GC-20 N GC-20, GC-82, GC-97 N GC-97 N GC-97 N GC-32 N GC-32 N GC-32, GC-36 N GC-15 N GC-19 N GC-15, GC-19, GC-32 N GC-15, GC-16, GC-17, GC-19 N GC-15 N GC-15 N GC-15, GC-17 N GC-35 N GC-32 N GC-32 N GC-36 N GC-40 N GC-40 N GC-40 N GC-36 N GC-16 N GC-17 N GC-17 N GC-40 N GC-15, GC-17 N GC-22 N GC-15, GC-17 N GC-21 N GC-31 N GC-31 N GC-31 N GC-6, GC-11, GC-13, GC-48 N GC-48 N GC-15, GC-17 N GC-32 N GC-19 N GC-19 N GC-15 N GC-81 N GC-31, GC-32 N GC-32 N GC-22 N GC-22 N GC-22, GC-88 N GC-22, GC-88 N GC-22, GC-88 N GC-87 N GC-31 N GC-15 N GC-15 N GC-15 N GC-19 N GC-19, GC-82, GC-97 N GC-15 N GC-22, GC-88 N GC-22, GC-88 N GC-22, GC-88 N GC-22, GC-88 N GC-97 N GC-13 N GC-15, GC-17 N GC-17 N GC-32 N GC-16 N GC-16 N GC-17 N GC-17 N GC-17 N GC-22, GC-88 N GC-82 N GC-14 N GC-14 N GC-13, GC-15, GC-19, GC-32 N GC-38 N GC-38 N GC-38 N GC-21 N GC-21 N GC-21 N GC-31 N GC-31 N GC-31 N GC-31 N GC-31 N610T100 GC-15 N GC-19, GC-82 N GC-97 N GC-97 N GC-31, GC-34, GC-42 N GC-19 N GC-19 N GC-15 N GC-32 N GC-35 N GC-34 N GC-35 N GC-34 N GC-25 N GC-25 N GC-31, GC-34, GC-82 N GC-15 N GC-19 N GC-32 N GC-19 N GC-35 N GC-34 N GC-22 N GC-94 N GC-94 N GC-30 N GC-22 N GC-38 N GC-42 N GC-38, GC-42 N GC-15 N GC-42 N GC-38, GC-42 N GC-31, GC-35, GC-42 N GC-38 N GC-38, GC-41, GC-42 N GC-38, GC-41, GC-42 N LC-22, GC-46 N GC-32 N GC-19 N GC-19 N GC-17 N GC-17 N GC-16 N GC-16 N GC-16, GC-17, GC-25 N GC-34 N GC-38 N GC-16 N GC-16 N GC-40 N GC-40 N GC-36 N GC-36 N GC-36

52 Index IND-17 N GC-36 N GC-36 N GC-40 N GC-16 N GC-19 N GC-15 N GC-17 N GC-22 N GC-22 N GC-32 N GC-32 N GC-35 N GC-35 N GC-34 N GC-34 N GC-36 N GC-36 N GC-40 N GC-40 N GC-42 N GC-42 N GC-19 N GC-19 N GC-15 N GC-15 N GC-17 N GC-17 N GC-16 N GC-16 N GC-21 N GC-31, GC-32, GC-35, GC-36, GC-40, GC-97 N GC-97 N GC-97 N GC-34 N GC-38 N GC-97 N GC-97 N GC-38, GC-97 N GC-34, GC-97 N GC-97 N GC-97 N GC-25 N GC-25 N GC-22 N GC-32 N GC-31, GC-32 N GC-31 N GC-31 N GC-31 N GC-31 N LC-22, GC-46 N GC-22 N GC-19 N GC-15 N GC-15 N GC-19, GC-82 N GC-17 N GC-17 N GC-15 N GC-15 N GC-15 N GC-10 N GC-30, GC-84 N GC-84 N GC-30 N GC-30 N GC-30, GC-84 N GC-29, GC-30 N GC-30 N GC-30 N GC-30 N GC-30 N GC-27, GC-29, GC-30 N GC-30 N GC-30 N GC-30 N GC-30 N GC-30 N GC-30 N GC-30 N GC-30 N GC-30 N GC-30 N GC-27, GC-29 N GC-98 N GC-98 N GC-14 N GC-14 N GC-11 GC-13 N GC-14 N GC-14 N GC-29 N GC-29 N GC-29 N GC-29 N GC-29 N GC-29 N GC-29 N GC-29 N GC-29 N GC-29 N GC-29 N GC-29 N GC-29 N GC-29 N GC-29 N GC-29 N GC-29 N GC-29 N GC-29 N GC-29 N GC-29 N GC-27 N GC-27 N GC-27 N GC-27 N GC-27 N GC-39 N GC-37 N GC-38, GC-39 N GC-38, GC-39 N GC-38, GC-39 N GC-38, GC-39 N GC-38, GC-39 N GC-38, GC-39 N GC-38, GC-39 N GC-38, GC-39 N GC-38 N GC-8 N GC-8 N GC-8 N GC-8 N GC-8 N GC-8 N GC-8 N GC-8 N GC-8 N GC-8 N GC-8 N GC-8 N GC-8 N GC-8 N GC-38 N GC-38, GC-39 N GC-8 N GC-8 N GC-8 N GC-8 N GC-8 N GC-8 N GC-8 N GC-8 N GC-8 N GC-8 N GC-8 N GC-8 N GC-14 N GC-35 N LC-2, GC-87 N LC-2, GC-87 N LC-2, GC-87 N GC-97 N GC-97 N GC-97 N GC-20 N GC-15, GC-16, GC-17, GC-19, GC-20 N GC-18 N GC-33 N GC-33 N GC-25 N GC-25 N ICP-20 N ICP-20 N ICP-20 N ICP-20 N ICP-20 N ICP-20 N ICP-20 N ICP-20 N ICP-20 N ICP-20 N ICP-20 N ICP-20 N ICP-20 N ICP-32 N ICP-32 N ICP-19 N ICP-19 N ICP-20 N ICP-20 N ICP-19 N ICP-19 N ICP-21 N ICP-21 N ICP-19 N ICP-22 N N ICP-19 N N N ICP-19, ICP-22 N ICP-19, ICP-22 N ICP-32 N ICP-20 N ICP-20 N ICP-20 N , ICP-20 N ICP-19 N ICP-19 N ICP-19 N ICP-19 N ICP-19 N ICP-32 N ICP-32 N ICP-19 N ICP-20 N ICP-20 N ICP-32 N ICP-32 N ICP-20 N ICP-22 N ICP-22 N ICP-4 N ICP-22 N ICP-21 N ICP-21 N ICP-21 N ICP Canada

53 Index IND US N N ICP-24 N ICP-22 N ICP-24 N ICP-24 N N ICP-21 N ICP-21 N N N ICP-32 N , ICP-19 N N N N N N N N N N N N N N N N N N N N N N N N N GC-15, N GC-15, N N N GC-5, N N N GC-82 N AA-13 N AA-13 N ICP-3, ICP-19, ICP-22 N N N GC-27, GC-85, GC-86 N GC-86 N GC-29 N IR-8 N GC-93, GC-95 N GC-94 N GC-32 N GC-94 N GC-40 N N , 1, ICP-27, ICP-30 N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N , 1, ICP-30 N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N ICP-27 N ICP-27 N ICP-27 N ICP-27 N ICP-27 N ICP-27 N ICP-27 N , ICP-29 N , ICP-29 N , ICP-29 N , ICP-29 N , ICP-29 N ICP-28 N ICP-28 N , ICP-30 N , ICP-30 N , ICP-30 N , ICP-30 N , ICP-30 N ICP-31 N ICP-31 N ICP-31 N ICP-31 N ICP-31 N ICP-31 N ICP-32 N ICP-32 N ICP-32 N ICP-32 N ICP-32 N ICP-28 N N AA-17 N ICP-28 N ICP-28 N LC-45 N LC-45 N LC-45 N LC-45 N LC-46 N LC-46 N LC-46 N LC-46 N LC-3, GC-87 N GC-81 N GC-81 N GC-81 N GC-81 N GC-81 N GC-81 N GC-89, TEA-36 N GC-89 N GC-89, TEA-33, TEA-36 N GC-89 N GC-89, TEA-33, TEA-36 N GC-89 N GC-89 N , N , N N N N N N N N N N N N N N N N LC-2, GC-87 N GC-29 N GC-8 N TEA-33 GC-85 N TEA-33, GC-85 N GC-87 N GC-87 N GC-86, TEA-33 N GC-86 N GC-86 N GC-86 N GC-81 N GC-81

54 Index IND-19 N GC-81 N GC-81 N GC-81 N GC-81 N , GC-81 N GC-14,, GC-81 N GC-5,, GC-81 N GC-5,, GC-81 N , GC-81 N GC-84 N GC-84 N GC-24 N GC-85 N GC-85 N GC-29, GC-82 N LC-2, GC-87 N GC-87 N GC-29 N N N N N N N N N GC-84 N LC-2 N LC-2 N LC-2 N LC-2 N GC-97 N GC-97 N GC-98 N GC-6, GC-81 N N N N N GC-88 N GC-88 N GC-88 N GC-88 N GC-88 N GC-88 N GC-88 N GC-88 N GC-88 N GC-88 N GC-88 N GC-88 N GC-88 N GC-88 N GC-88 N LC-1 N LC-1 N LC-1 N LC-1 N LC-1 N LC-1 N IR-18 N IR-18 N IR-18 N IR-18 N IR-18 N IR-18 N IR-18 N IR-18 N IR-18 N IR-18 N IR-18 N IR-18 N IR-18 N IR-18 N IR-15 N IR-18 N N IR-18 N N IR-2 N IR-2 N LC-46 N LC-45 N LC-45 N LC-48 N LC-46 N LC-2, GC-87 N GC-87 N GC-87 N LC-2, GC-87 N LC-2, GC-87 N LC-2, GC-87 N GC-32 N UV-19 N N GC-87 N GC-94 N GC-15 N GC-15 N GC-87 N GC-3, GC-87 N N N N N GC-91 N GC-91 N GC-91 N GC-91 N GC-91 N GC-91 N GC-91 N GC-91 N GC-91 N GC-91 N GC-91 N GC-91 N GC-95 N GC-94 N GC-94 N GC-94 N GC-5, GC-95, GC-96 N GC-96 N GC-95, GC-96 N GC-96 N GC-96 N GC-96 N GC-96 N GC-96 N GC-96 N GC-95 N GC-93 N GC-93 N GC-93 N GC-93 N GC-93 N N N N N N N N N N N N N N GC-93 N GC-93 N GC-95 N GC-95 N GC-94 N GC-94 N GC-91 N GC-93 N N N N N GC-91 N GC-91 N GC-91 N GC-91 N GC-91 N GC-94 N GC-94 N GC-94 N GC-95, GC-96 N GC-96 N GC-96 N GC-96 N GC-96 N GC-93, GC-95 N GC-87 N ICP-26 N N N N N N N N N N N N N N N N N GC-20, GC-29, GC-30 N GC-86 N GC-86 N GC-20 N LC-28 N LC-28 N LC-28, LC-39 N LC-28, LC-40 N LC-28, LC-42, LC-43 N LC-28 N GC-86 N GC-87 N GC-87 N AA-17, 0 N GC-81 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-62 N GC-84 N GC-84 N GC-90 N GC-90 N GC Canada

55 N GC-90 N GC-90 N GC-90 N LC-2, GC-87 N N LC-47 N LC-47 N LC-47 N LC-47 N LC-49 N LC-49 N LC-49 N LC-49 N LC-49 N LC-49 N LC-49 N LC-49 N LC-49 N LC-49 N LC-49 N LC-49 N LC-49 N LC-49 N LC-49 N LC-49 N LC-49 N LC-49 N LC-49 N LC-49 N LC-49 N LC-48 N LC-48 N LC-48 N LC-48 N GC-90 N GC-90 N GC-90 N LC-2 N LC-2 N GC-10, N GC-10, N GC-10, N GC-10, N GC-10, N GC-10, N GC-10, N GC-10, N GC-10, N GC-10, N GC-10, N GC-10, N GC-10, N GC-10, N LC-2 N GC-86 N GC-10, N GC-10, N GC-14 N N N N N N N N N N N N N , GC-71 N N , GC-55 N N N N N N N N , GC-59 N , GC-59, GC-60 N N N N N N N N N N N N N N N N N N N N N N , GC-59, GC-60 N N N N , GC-59, GC-60 N , GC-79 N N N N N N N N N N N GC-55 N N N N N N N , GC-77 N N , GC-77 N , GC-59, GC-60, GC-69, GC-78 N , GC-67 N N N N N N N N N , GC-59, GC-60, GC-73 N , GC-59, GC-60 N N N N N N N N N N N , GC-59, GC-60 N N , GC-59, GC-60 N , GC-64 N , GC-64, GC-70 N N N N N N N N N N N N N N N N N N N N N N N N N , GC-59 N N N N N N N , GC-59 N N N N N N N N N N N , GC-69 N N N N N , GC-59 N , GC-60 N N N N , GC-73 N N N N N N N Index IND US

56 N N N N N N N N , GC-59, GC-76, GC-79 N , GC-59 N N N N N N , GC-59, GC-60 N N N N , GC-59 N N N N N , GC-59, GC-68 N , GC-59, GC-60 N , GC-59, GC-60, GC-67 N N N N N N N N N N N N N N N N N N N N N N N N N , GC-59 N N N N N N N N N , GC-59 N N N N N N N N N N N N , GC-59, GC-60 N N N N N N GC-55 N GC-55 N N N N N N N N N N N N N N N N N N N N , GC-59 N , GC-59, GC-60 N , GC-60, GC-65 N , GC-59 N N N N N N N N , GC-59, GC-60 N , GC-60 N N , GC-59 N N N , GC-59 N , GC-59, GC-60 N N N N GC-57 N GC-57 N N GC-55 N GC-55 N GC-55 N GC-55 N GC-55 N GC-55 N N N N N N N N N GC-57, GC-80 N GC-57 N GC-57 N GC-55 N GC-55 N N N N N , GC-59, GC-60 N , GC-59, GC-60, GC-66 N N N N N N N N N N , GC-75 N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N , GC-74 Index IND Canada

57 N N N N N N N N N N N N N N N N N N N N GC-55 N GC-55 N N N N N N N N N N N GC-57 N GC-57 N GC-57 N N N N N , GC-72 N N N N N N , GC-72 N N N N N N N N N N N N N N , GC-74, GC-75 N GC-55 N GC-49 N GC-49 N GC-49 N GC-49 N GC-49 N GC-49 N GC-49 PELA1000 UV-12 PELA1001 UV-15 PELA1003 UV-15 PELA1004 UV-15 PELA1005 UV-15 PELA1006 UV-15 PELA1007 UV-15 PELA1008 UV-15 PELA1009 UV-15 PELA1010 UV-15 PELA1011 UV-15 PELA1012 UV-15 PELA1013 UV-15 PELA1014 UV-15 PELA1015 UV-15 PELA1016 UV-15 PELA1020 UV-12 PELA1021 UV-12 PELA1022 UV-12 PELA1025 UV-14 PELA1026 UV-14 PELA1029 UV-13 PELA1030 UV-13 PELA1034 UV-13 PELA9010 UV-10 PELA9012 UV-10 PELA9013 UV-10 PELA9018 UV-10 PELA9019 UV-10 PELA9020 UV-10 PELA9021 UV-10 PELA9026 UV-15 PELA9033 UV-15 PELA9038 UV-12 PELA9039 UV-12 PELA9040 UV-12 PELA9048 UV-12 PELA9057 UV-10 PELA9058 UV-10, UV-18 S GC-44 S GC-44 S GC-44 S GC-44 S LC-20 S LC-20 S GC-28 S GC-28 S LC-20 S GC-28 S GC-28 S LC-23 S LC-23, GC-48 S LC-23, GC-48 S LC-23, GC-48 S LC-23, GC-48 S LC-23, GC-48 S LC-23, GC-48 S LC-23, GC-48 S LC-23, GC-48 S LC-23, GC-48 S LC-23, GC-48 S LC-23, GC-48 S LC-23, GC-27, GC-48 S LC-23, GC-27, GC-48 S LC-23, GC-48 S LC-23, GC-48 S LC-23, GC-48 S LC-23, GC-48 S LC-23, GC-48 S LC-23, GC-48 S LC-23, GC-48 S LC-23, GC-48 S LC-23, GC-48 S LC-23, GC-48 S LC-23, GC-48 S LC-22, GC-46 S LC-22, GC-46 S LC-22, GC-46 S GC-46, LC-22 S LC-22, GC-46 S LC-22, GC-46 S LC-22, GC-47 S LC-22, GC-47 S LC-22, GC-46 S LC-22, GC-46 WE ICP-20 WE ICP-20 WE ICP-19 WE ICP-20 WE ICP-19 WE ICP-22 WE ICP-19 WE WE WE WE WE ICP-22 WE WE WE WE WE WE WE WE ICP-19 WE WE WE WE WE WE WE WE WE WE Index IND US

58 Terms and Conditions of Sales

59 T&C-2 Terms and Conditions of Sales US 1. Delivery Dates and Prices. a) All delivery and shipment dates indicated on the face hereof are approximate and subject to Seller s availability schedule. Seller will make reasonable efforts to meet the delivery date(s) quoted. However, Seller will not be liable for its failure to meet the quoted delivery dates or for any delay in performance hereunder due to unforeseen circumstances or shortages, due to causes beyond its control, or due to its voluntary or mandatory compliance with any governmental act, regulation, or request. If, by reason of such circumstances, Seller s supplies of the equipment or service (hereafter the Product(s) ) covered hereby are limited, Seller shall have the right to allocate the available supply among its customers in such manner as it, in its sole discretion, determines appropriate. b) All orders are priced on the basis of an estimated shipment date within ninety (90) days of the date of order to the stated destination. Should Buyer request a change in the estimated shipment date or otherwise cause delay in delivery beyond ninety (90) days from the date of order or request that the Products be shipped outside the country of original delivery, the prices established by this quote shall no longer apply, and Seller s list prices in effect on the actual date of shipment shall be used in determining the price to be paid. Except as provided above, if the price is stated by reference to a published price list, then the price shall be the price on the published price list in effect at the time Seller receives Buyer s purchase order, without regard to the requested delivery date. However, if any Product is ordered prior to the effective date of a published price change and the delivery date is rescheduled, the price in effect at the time of the initial delivery date shall apply. c) If Buyer requests shipment to a country other than the country originally requested, and if Seller elects not to cancel the order subject to Section 12 hereof, Seller s applicable surcharge for the actual country of delivery shall be added to the price. d) Notwithstanding any provision to the contrary herein, all prices are subject to increase without notice to reflect changes in: (1) Federal or State laws taxing raw material or processed materials; (2) applicable laws or regulations governing working hours or compensation of labor; or (3) freight charges, insurance costs, duty or other factors affecting costs of shipment. 2. Packing and Loss or Damage in Transit. Products will be packed for shipment in a manner suitable to the method of shipment specified by Buyer, or to the method selected by Seller in the absence of instructions. Unless otherwise indicated on the face hereof, all sales hereunder are f.o.b. shipping point, and all risk of loss or damage to equipment in transit is upon Buyer. Payment will be made in accordance with Paragraph 5 below. 3. Payment Due For Partial Deliveries. Seller may, in its sole discretion, deliver any portion of the Products ordered, regardless of utility to Buyer in the absence of the undelivered portion, and all such partial deliveries shall be accepted and paid for in accordance with the terms of Paragraphs 4 and 5 below. Likewise, completion of any installation services shall not be a condition to Buyer s obligation to remit payment. The making of a partial delivery that, to any extent, is not in accordance with the contract of sale shall not affect the Buyer s obligation hereunder to remit payment. 4. Inspection, Acceptance and Return of Products or Trade-Ins. Buyer shall inspect the Products immediately on their arrival and shall within five (5) days after arrival give written notice to the Seller of any claim for shortage or that the Products do not conform with the terms of the contract of sale. If the Buyer shall fail to give such notice, the Products shall be deemed accepted and to conform with the terms of the contract of sale and the Buyer shall be bound to pay for the Products in accordance with the terms of Paragraph 5 below. Return of Products, defective or otherwise, will not be accepted by Seller without notification from Buyer to Seller within 30 days of receipt of invoice and with subsequent authorization of Seller. Products authorized to be returned shall be shipped f.o.b. destination, freight prepaid. When return of nonconforming goods has been accepted by Seller, conforming shipment may be made in accordance with Paragraph 1 above and Paragraph 8 below without further liability on Seller s part. Buyer will be liable for restocking charges in the event Products are returned to the Seller which are not defective and are in accordance with these terms. When a trade-in is authorized by Seller, Buyer shall ship, f.o.b. destination, freight prepaid, the material or equipment so authorized for tradein, to Seller s specified location. 5. Payment and Credit Terms. Unless otherwise indicated on the face hereof, Buyer agrees to remit payment in full to the address provided on the face of Seller s invoice for all shipments, including shipments of any portion of the Products ordered, upon receipt of invoice. This obligation shall not be contingent upon the completion of any installation services included in the purchase price. No cash discounts will be granted. Account balances not paid in accordance with these terms, are subject to the maximum prevailing legal interest rate calculated from date of delinquency. In the event Seller finds it necessary to refer an account to an attorney or an agent for collection of delinquent accounts, Buyer shall pay all costs of collection including reasonable attorney s fees. Buyer agrees that Seller shall retain a security interest in the Products sold hereunder to secure any portion of the price not paid on delivery and will, on request, execute a security agreement in such form as is required by Seller, which, at Seller s option, may be filed with appropriate local, state, or other relevant authorities. Should Buyer become delinquent in the payment of any sum due hereunder, or if Buyer becomes insolvent, or if any proceedings are commenced under any bankruptcy or similar laws for Buyer s reorganization or other debt adjustment, Seller will not be obligated to continue performance. Seller reserves the right to change the credit terms provided herein when, in Seller s opinion, the financial condition or previous payment record of Buyer so warrants. If, within 30 days, Buyer fails to agree and comply with different terms of credit, and/or fails to give adequate assurance of due performance, Seller may (a) by notice to Buyer, treat such failure or refusal as a repudiation by Buyer of the portion of the purchase order not then fully performed, whereupon Seller may cancel all further deliveries and any amounts unpaid hereunder shall immediately become due and payable; (b) make shipments under reservation of a demand for advance payment or payment against tender of documents of title. Buyer s acceptance of delivery of any Products shall constitute a representation that Buyer is solvent. 6. Taxes. Buyer is responsible for the ultimate payment of all taxes which may be assessed or levied on or on account of materials sold hereunder to the Buyer whether termed a gross receipts tax, use tax, property tax, sales tax or otherwise. Where Buyer claims that a transaction is not subject to any such tax, that Buyer is exempt, or that Seller is not required to collect such tax, Buyer agrees to provide Seller with any documentation necessary to support such a claim, to allow Seller to document its decision not to collect such tax (es), and to indemnify and hold Seller harmless from and against any and all fines, penalties, interest, taxes, and other expenses, including reasonable attorney s fees, incurred by Seller as a result of reliance upon Buyer s position. 7. Installation and Site Preparation. Installation services are included in the purchase price of the Products sold hereunder only if expressly so stated on the face of Seller s quotation or in Seller s applicable price list. Installation services for Products transferred outside the country of original delivery by Buyer s actions may be subject to additional charges based on the actual installation site location. For Products requiring installation by Seller s service personnel, it is the responsibility of the Buyer to prepare the site environmentally and provide the required services, power, water, drain, air, bottled gases, permits,

60 Canada Terms and Conditions of Sales T&C-3 licenses, approvals, etc., as well as whatever is required to uncrate and move the Product to its location. Failure to do so will result in a service charge by Seller to cover the lost time of its service personnel. Because Seller s service personnel may be required to enter upon Buyer s premises for the purpose of providing service to the Product sold hereunder, Buyer hereby undertakes to maintain its premises in a safe condition and to comply with all applicable laws, statutes and regulations governing workplace health and safety, and hereby accepts full responsibility for any harm, injury, or liability to Seller s personnel while on Buyer s premises, except to the extent caused solely by the negligence of Seller s personnel. Seller s sales and service personnel are not authorized to enter into any indemnity or hold harmless agreements on behalf of Seller. Seller will not, in any event, indemnify, defend or hold Buyer harmless from any liability that it may incur to Seller s sales and service personnel. 8. Limited Warranty. a) Warranty. i) Except as otherwise provided herein, Seller warrants to Buyer that the Products sold to Buyer are, at the time of shipment to Buyer from Seller, free from defects in material and workmanship. ii) This warranty shall be valid for a period of 90 days from the date of shipment to Buyer, unless a different period is specified herein, or in Seller s applicable price list in which case the specified period shall apply. Notwithstanding anything to the contrary contained herein, the warranty period for data processing equipment, including data storage devices, processors, printers, terminals, communication interfaces, tape drives and all similar devices, is in all cases limited to ninety (90) days from the date of shipment to Buyer. iii) Except in the case of an authorized distributor of Seller, authorized in writing by Seller to extend this warranty to the distributor s customers, the warranty herein applies only to Buyer as the original purchaser from Seller and may not be assigned, sold or otherwise transferred to any third party. iv) As Buyer s sole and exclusive remedy under this warranty, Seller agrees either to repair or replace, at Seller s sole option, any part or parts of such Products which, under proper and normal conditions of use, prove(s) to be defective within the applicable warranty period. Alternately, Seller may at any time, in its sole discretion, elect to discharge its warranty obligation hereunder by accepting the return of any defective Product pursuant to the terms set forth herein and refunding the purchase price paid by Buyer. b) Exclusions and Limitations. i) It is recognized that some parts by their nature may not function for the warranty period applicable to the Product. Therefore, excluded from the warranty herein are chromatography columns, filaments, energy sources, lamps, power amplifier tubes, graphite tubes, sample cell holders, burner and furnace chambers, nebulizers, and other similar parts referenced in the applicable operating manual. ii) The warranty herein excludes any equipment or accessories which are identified on applicable price lists, quotations, special promotional materials, or on the face hereof, for which this limited warranty may be further limited. Included within this category are items produced by third party manufacturers (as to which Seller passes to Buyer the warranty it has been provided by the manufacturer) and items which are sold at specially reduced prices with reduced warranty protection (in some cases, extended warranty protection may be available at an increased price). iii) This warranty does not cover loss, damage, or defects resulting from: transportation to the Buyer s facility, improper or inadequate maintenance by Buyer, Buyer-supplied software or interfacing, unauthorized modification or misuse, operation outside of the environmental specifications for the Product or improper site preparation or maintenance. iv) No warranty is made with respect to used, reconstructed, refurbished or previously owned Products, which will be so marked on the face hereof and, unless otherwise indicated on the face hereof, shall be sold As Is. v) The warranty herein applies only to Products within the country of original delivery. Products transferred outside the country of original delivery, either by Seller at the direction of Buyer or by Buyer s actions subsequent to delivery, may be subject to additional charges prior to warranty repair or replacement of such Products based on the actual location of such Products and Seller s warranty and/or service surcharges for such location(s). c) Place of Service. Except when otherwise provided in Seller s current applicable price list, Seller shall use its best efforts to perform all warranty services hereunder at the Buyer s facility, as soon as reasonably practicable after notification by the Buyer of a possible defect; provided, however, that Seller reserves the right to require that the Buyer return the Product to Seller s production facility, transportation charges prepaid, when necessary to provide proper warranty service. d) Software and Firmware Products. The sole and exclusive warranty applicable to software and firmware products provided by Seller for use with a processor will be as follows: Seller warrants that such software and firmware will conform to Seller s program manuals current at the time of shipment to Buyer when properly installed on that processor, provided however that Seller does not warrant that the operation of the processor or software or firmware will be uninterrupted or error-free. NO OTHER WARRANTY IS EXPRESSED OR IMPLIED. SELLER EXPRESSLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 9. Exclusive Remedies. THE REMEDIES PROVIDED HEREIN ARE BUYER S SOLE AND EXCLUSIVE REMEDIES. SELLER SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON CONTRACT, TORT, OR OTHER LEGAL THEORY ARISING OUT OF THE SALE, INSTALLATION, SERVICE OR USE OF ITS PRODUCTS. SELLER NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTAL- LATION, SERVICE OR USE OF ITS PRODUCTS. 10. Patent Indemnity. Seller agrees to defend, at its own expense, any suit or legal proceeding which may be brought against Buyer alleging infringement by Buyer of any patent of the United States, by Buyer s use of the Product sold hereunder for its intended purposes, provided that Buyer shall give Seller prompt written notice of any claim, threat, or institution of suit or legal proceeding, and provided that Seller shall then have the sole right to control and conduct the defense and/or settlement of such claim, threat, suit or legal proceeding, either in the name of Seller or Buyer or both, and Buyer shall, at Seller s request and expense, provide relevant information and reasonable cooperation. Seller shall pay all final judgments and all costs and attorney s fees assessed against Buyer in any such suit or legal proceeding, provided Buyer has complied with the conditions hereof with respect to prompt notice and cooperation in connection with such suit or legal proceeding and given exclusive control thereof to Seller, but Seller shall not be liable for any attorney s fees or other legal expenses incurred by Buyer without the knowledge and prior written consent of Seller. Seller shall also have the right, at its own expense, to procure for Buyer the right to continue using the Product claimed to infringe, replace said Product with an equally satisfactory non-infringing Product, modify said Product so that it becomes non-infringing, or remove such Product and refund the purchase price thereof less a reasonable amount for use, damage or obsolescence.

61 T&C-4 Terms and Conditions of Sales US The foregoing indemnity fully defines Seller s obligation for patent infringement; such obligations to defend and make payment shall specifically not apply to: a) an infringement claim resulting from additions or changes in or to the Product made by Buyer or any third party or from use in combination with other equipment; or b) an infringement claim which is settled without the consent of Seller; or c) an infringement claim which results from compliance by Seller with specifications furnished by Buyer. The total amount of Seller s obligation and liability under this Section shall not exceed the price paid by Buyer to Seller for the Product held to infringe, and in no event will Seller be held accountable for consequential damages under this indemnity, such as, for example, loss of business profits or goodwill. With respect to goods manufactured in whole or in part to Buyer s specifications, the Buyer will protect and indemnify Seller against all claims for damages or profits arising from infringement of patents, designs, copyrights or trademarks. 11. Modification of Terms. BUYER S ACCEPTANCE OF ANY QUOTATION IS EXPRESSLY SUBJECT TO BUYER S ASSENT TO EACH AND ALL OF THE TERMS AND CONDITIONS SET FORTH IN SELLER S QUOTATION, AND BUYER S ASSENT TO THESE TERMS AND CONDITIONS SHALL BE CONCLUSIVELY PRESUMED FROM BUYERS SUBMISSION OF ITS PURCHASE ORDER. NO ADDITION TO OR MODIFICATION OF SAID TERMS AND CONDITIONS SHALL BE BINDING UPON SELLER UNLESS SPECIFICALLY AGREED TO BY SELLER IN WRITING. IF BUYER S PURCHASE ORDER OR OTHER CORRESPONDENCE CONTAINS TERMS OR CONDITIONS CONTRARY TO OR IN ADDITION TO THE TERMS AND CONDITIONS CONTAINED IN SELLER S QUOTATION, ACCEPTANCE OF ANY ORDER BY SELLER SHALL NOT BE CONSTRUED AS ASSENT TO SUCH CONTRARY OR ADDITIONAL TERMS AND CONDITIONS OR CONSTITUTE A WAIVER BY SELLER OF ANY OF THE TERMS AND CONDITIONS CONTAINED IN SELLER S QUOTATION. 12. Authority to Export. ALL ORDERS ACCEPTED FOR EXPORT (AND/OR RE- EXPORT) ARE SUBJECT TO: 1) UNITED STATES GOVERNMENT EXPORT REGULATIONS AND; 2) BUYER PROVIDING SELLER WITH ALL DOCUMENTATION NECESSARY FOR SHIPMENT TO THE DESTINATION COUNTRY. 13. Software Licenses and Copyrighted Material. a) Seller provides software products by license only. The terms of the license are available from Seller and are accepted by Buyer on delivery of licensed software. b) Unless otherwise specified, Seller s copyrighted material (software, firmware, and printed documentation) may not be copied except for archive purposes, to replace a defective copy, or for program error verification by Buyer. 14. Miscellaneous. a) Applicable laws. This contract shall be construed in accordance with the laws of the State of New York, U.S.A. without regard to its principles of conflict of laws. Any disputes relating to the contract of sale between Buyer and Seller shall be adjudicated in the state or federal courts in the State of New York, U.S.A., and both parties hereby consent to the jurisdiction of said courts for purposes of any such litigation. The parties expressly agree to waive application of the United Nations Convention on Contracts for the International Sale of Goods. b) Confidential Data and Information. If, in connection with the sale, purchase, use, or maintenance of the Products, Seller is requested, required, or deems it advisable to furnish data or information which it, in its sole discretion, deems proprietary, confidential, or both, Seller shall not, in any event, submit or be required to furnish such data or information unless Buyer enters into an agreement concerning the handling, use, copying, retention and return of such information, the form of which agreement is available to Buyer on request. Seller does not agree to accept any proprietary or confidential information of Buyer in the absence of such a written agreement signed by an authorized representative of Seller. c) Assignment. Any attempt by Buyer to assign, transfer or delegate any of the rights, duties, warranties, or obligations herein shall be null and void. d) Non-waiver. Seller s failure to exercise any of its rights shall not constitute or be deemed a waiver or forfeiture of such rights. e) Successors. Any contract for sale incorporating Seller s terms and conditions shall be binding upon the parties thereto, their successors and permitted assigns. f) Headings. The headings herein are for convenience only and have no substantive meaning. g) Severability. If any provision herein is deemed unenforceable by a court of competent jurisdiction, the other provisions shall remain in full force and effect as if the unenforceable provision had not been included. PerkinElmer is a trademark of PerkinElmer, Inc. e-ssentials is a trademark of PerkinElmer Instruments, LLC. All other product and company names mentioned herein may be the trademarks or registered trademarks of their respective owners. PerkinElmer is not responsible for typographical or photographic errors that may appear in this catalog. We reserve the right to make adjustments or corrections due to changing market conditions, product discontinuations, or typographical or photographic errors in advertisements or product descriptions. Policies, item availability, and prices are subject to change without notice.

62 2002 PerkinElmer, Inc. All rights reserved. PerkinElmer is a trademark of PerkinElmer, Inc. e-ssentials is a trademark of PerkinElmer Instruments, LLC. PerkinElmer Instruments 710 Bridgeport Avenue Shelton, CT USA Phone: (800) or (+1) D-6613 WP30240 Printed in the USA