WiFi Backup Camera Go Vue

Transcription

1 WiFi Backup Camera Go Vue Product Manual I Installation Instructions Model # RVS Rear View Safety, Inc. "' 2017 r-, REAR VIEW TM 1 L_JSAF TY A Safe Fleet Brand

2 what s in the Box? 1 Color CCD infra-red weatherproof Camera transmitter with power cable 3M sticker 2 ReaR View Safety

3 table of Contents introduction...4 features...5 Specifications installation...8 Operations Reverse with Confidence 3

4 introduction Please read all of the installation instructions carefully before installing the product. improper installation will void manufacturer s warranty. thank you for purchasing our wifi backup camera! the user manual has a detailed description on how to correctly use the wifi backup camera and provides detailed product information, including operation, installation precautions and technical specifications. Please read the manual carefully before using. we hope you enjoy this system. 4 ReaR View Safety

5 features Product Features wifi transmitter wide View Camera with adjustable mounting bracket weatherproof Camera full night vision easy installation DC 12V car power supply Unobstructed transmission distance is 100 feet Connects to iphone, ipad and android devices Reverse with Confidence 5

6 Specifications Camera Specifications ITEM SPECIFICATION Camera 1/4 Sharp Color CCD Picture elements 250,000 pixels Gamma Correction r=0.45 to 1.0 image Sensor 480tV lines PaL:500(H)*582(V), NtSC:510(H)*492(V) Lens 2.1mm View angle 130 Sync System internal Synchronization infra-red distance 50 feet (18 infrared) Usable illumination 0 Lux (ir On) Power Source DC 12V-24V (+/- 10%) S/N Ratio More than 48dB electronic iris 1/50, 160-1/100,000sec Video Output 1Vp.p 75ohm ir Switch Control acds automatic Control Vibration and Shock Rating 20G / 100G Operating temperature -30 C - 80 C / RH 95% Max Storage temperature -30 C - 60 C / RH 95% Max 6 ReaR View Safety

7 Specifications Transmitter Specifications ITEM SPECIFICATION transmitting frequency 2400MHz MH Modem mode b: DSSS(CCK,DQPSK,DBPSK) transmission distance with no obstacle Max 100 feet frame rate 30fps Video resolutions VGa 640x480 Video compression H.264 wireless protocols ieee b, ieee g ieee 802.n(1t1RModes) Power supply DC 12V Consumption current 150ma (Max) encryption mode wpa2 Rainproof yes weight 60+-5g tx Dimensions 45x75x18mm (excluding antenna) Operation temperature -10 C~+50 C Operation humidity 150%~85% RH Reverse with Confidence 7

8 installation installation instructions for the camera: 1. attach camera bracket close to rear marker lights, centered on vehicle. 2. attach camera to bracket using screws provided and adjust the angle. Notice: the positive and negative pole of the power cable of the transmitter box are connected to the positive and negative pole of the rear lamp of the car. Never reverse the positive and negative pole. Otherwise the transmitter box and the camera can be damaged and cannot be used. Camera can also be connected to ignition power to view as long as the vehicle is turned on. 8 ReaR View Safety

9 Operations Operations for Android system client Installation of the APP software: 1. turn on the intelligent mobile device and enter the GOOGLe PLay store. 2. Search GOVUe, and download. 3. install the app software, with the following interface: WiFi Connection: 1. Open your devices wifi setting and locate the GoVue wifi. 2. Connect to the GoVue wifi (Default password: ). 3. with the wifi connected, open the GoVue app. Reverse with Confidence 9

10 Operations View the video: Open the app, if the connection between the wifi of the camera and the intelligent mobile device is successful, the icon will be highlighted and you will be able to see the camera view as shown. when the connection is bad, the icon will not be illuminated. 10 ReaR View Safety

11 Operations when you see this image upon opening app Please exit the app and check power to the camera and wifi connection. Settings: Press this icon to enter into the settings menu. in this menu you will be able to change the default factory SSiD and password of the wifi camera. Reverse with Confidence 11

12 Operations Notice User could press the ReSet button on the transmitter to renew the default factory SSiD and password. Operations for ios Apple system client installation of the app software: 1. turn on the intelligent mobile device and enter the iphone app Store. 2. Search GoVue, and download. 3. install the app software with the following interface: 12 ReaR View Safety

13 Operations WiFi Connection: 1. Open your devices wifi setting and locate the GoVue wifi. 2. Connect to the GoVue wifi (Default password: ). 3. with the wifi connected, open the GoVue app. View the video: Open the app and if the connection between the wifi of the camera and the intelligent mobile device is successful, you will be able to see the camera view as shown in the figure. Reverse with Confidence 13

14 Notice: Operations when you see this image upon opening app Please exit the app and check power to the camera and wifi connection. Settings: Press this icon to enter into the settings menu. in this menu you will be able to change the default factory SSiD and password of the wifi camera.. Notice: User could press the ReSet buton of the transmitter to renew the default factory SSiD and password. 14 ReaR View Safety