Tightening system. Hand-held Nutrunners ErgoSpin SlimLine
|
|
- Agnes Collins
- 6 years ago
- Views:
Transcription
1 Hand-held Nutrunners ErgoSpin SlimLine
2 2 Bosch Rexroth AG Electric Drives and Controls Documentation Instructions Right-angle nutrunner with slim angle head for high accessibility. Technical data Working range Max. output drive speed Tool mount Installation length Weight [Nm] [1/min] [mm] [kg] 1-5 ESA005S /4" square ESA013S ESA030S /8" square ESA040S ESA056S ESA065S ESA075S /2" square ESA100S ESA150S /4" square ESA220S Accessories Holder for right-angle nutrunner and straight nutrunner ESAT Turning suspension ErgoSpin Diameter [mm] ESA ESV ESMH ESA ESV ESMH
3 Electric Drives and Controls Bosch Rexroth AG 3 Extension ErgoSpin Installation length [mm] ESA ESET ESA056 ESET ESA065 ESET ESA075 ESET ESA100 ESET Vertical suspension ESMV Start lever extension for straight nutrunners incl. vertical suspension ESTE
4 4 Bosch Rexroth AG Electric Drives and Controls Stroke extension ESSE Adapter for handling devices ErgoSpin ESA ESV ESCU1B ESA ESV ESCU2B Adapter without drilling template ErgoSpin ESA ESV ESCU1F ESA ESV ESCU2F Mounting aid for angle heads ESWM Connection cable straight angle 3 AL AL AL AL AL AL > 0,5 ALF¹
5 Electric Drives and Controls Bosch Rexroth AG 5 Connection cable angle angle > 0,5 ALWF¹ ErgoSpin connection cable straight straight > 0,5 AVF¹ ErgoSpin connection cable angle straight > 0,5 AWF¹ ErgoSpin connection cable angle straight with freely rotatable right-angle plug > 0,5 AWDF¹ ErgoSpin connection cable angle angle with freely rotatable right-angle plug > 0,5 ALWDF¹ Network coupler cable 0,43 NKL NKL NKL NKL > 0,5 NKLF¹
6 6 Bosch Rexroth AG Electric Drives and Controls USB programming cable 3 USB Supply cable 1.8 CS351USC (110V) ² ¹) The connection cables ALF, ALWF, AVF, AWF, AWDF, ALWDF and NKLF require a length specification in addition to the part number. The "F" in the code signifies flexible cable length in increments of 0.25 m. At the time of ordering, the length specification must be added to the part number. Ordering example: Connection cable m long is ALF / ²) Supply cable for the USA (The supply cable for Europe is standard included)
7 Bosch Rexroth AG Postfach Lohr, Germany Bgm.-Dr.-Nebel-Str Lohr, Germany Tel Fax Local contact information can be found at: Bosch Rexroth AG 2012 Subject to modification. Printed in Germany The data specified above only serve to describe the product. As our products are constantly being further developed, no statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging.
Software tools. CamBuilder
2 Bosch Rexroth AG Electric Drives and Controls Documentation Application description Easy creation of cams with the help of graphical objects Utilization of motion laws according to VDI 2143 Switching
More informationCompact operator panels " display IndraControl VCP 02, 05, 08, 11
3-3.8" display IndraControl VCP 02, 05, 08, 11 2 Bosch Rexroth AG Electric Drives and Controls Documentation Technical data VCP 02.2 VCP 05.2 VCP 08.2 VCP 11.2 VCP 11.2T Processor CPU RISC ARM9 200MHz
More informationServo drives. Firmware 1G IndraDrive (MPH, MPB, MPD, MPC)
Firmware 1G IndraDrive (MPH, MPB, MPD, MPC) 2 Bosch Rexroth AG Electric Drives and Controls Documentation Firmware Customized functionality All standard functions included Individual function extensions
More informationFieldline. 4 digital inputs, 4 digital inputs/outputs RF-FLM DIO 8/4 M8
4 digital inputs, 4 digital inputs/outputs 2 Bosch Rexroth AG Electric Drives and Controls Documentation Technical data Local bus interface Designation Local bus M8 connector Supply for module electronics
More informationTechnology modules. 1 SSI interface for absolute encoders, 1 analog output S20-SSI-AO-1/1
1 SSI interface for absolute encoders, 1 analog output S20- 2 Bosch Rexroth AG Electric Drives and Controls Position detection via absolute encoders with SSI interface Encoder resolution up to 56 bit Transmission
More informationFieldline. Fieldline Modular bus coupler, PROFIBUS, 8 digital inputs 24 V DC, M12 RF-FLM BK PB M12 DI 8 M12
Modular bus coupler, PROFIBUS, 8 digital inputs 24 V DC, M12 RF-FLM BK PB M12 DI 8 M12 2 Bosch Rexroth AG Electric Drives and Controls Documentation Technical data Local bus interface Designation Local
More informationTemperature modules. 8 inputs for connection of thermocouple sensors S20-AI-8-UTH
8 inputs for connection of thermocouple sensors 2 Bosch Rexroth AG Electric Drives and Controls 8 inputs for thermocouples Linear voltages from -100 mv to +100 mv 1 input -5 V to +5 V 4 Pt 100 inputs (external
More informationModular I/O system. Power module
2 Bosch Rexroth AG Electric Drives and Controls Documentation Supply module Connection: 1x M23 / 6x M12 The passive feed module is used to supply voltage to IndraControl S67 components. Thanks to options
More informationSafety modules. 8/4 inputs PROFIsafe S20-PSDI8/4
8/4 inputs PROFIsafe 2 Bosch Rexroth AG Electric Drives and Controls 8/4 inputs PROFIsafe SIL 3 to EN 61508 SILCL 3 to EN 62061 Category 4 / PL e according to EN ISO 13849-1 PROFIsafe Electronic device
More informationTemperature module. 4 inputs for thermocouples
2 Bosch Rexroth AG Electric Drives and Controls Documentation 4 inputs, M12 Thermocouples (TC) M12 Technical data S67-AI4-UTH-M12 Local bus interface Designation System bus M12 connector, B-coded, 5-pin,
More informationSafeLogic compact. CPU module (EFI, ACR) SLC-3-CPU3
CPU module (EFI, ACR) SLC-3-CPU3 2 Bosch Rexroth AG Electric Drives and Controls Documentation Fast start-up due to system connector Transparent communication link via gateways Safety switching of several
More informationAnalog input module. 4 inputs, voltage and current
2 Bosch Rexroth AG Electric Drives and Controls Documentation 4 inputs: M12, 0 to 20 ma, 4 to 20 ma, ±20 ma, 0 to 10 V, ±10 V Technical data S67-AI4-U/I-M12 Local bus interface Designation System bus M12
More informationServo drives. Firmware 2G IndraDrive (MPE, MPB/MPM, MPC)
Firmware 2G IndraDrive (MPE, MPB/, MPC) 2 Bosch Rexroth AG Electric Drives and Controls Firmware 2G IndraDrive (MPE, MPB/, MPC) Documentation Firmware Customized functionality All standard functions included
More informationDigital I/O modules. 8 inputs/outputs, M8
2 Bosch Rexroth AG Electric Drives and Controls Documentation Digital I/O module 8 inputs/outputs 0.5 A per channel M8 Technical data S67-DIO8-M8 Local bus interface Designation System bus M12 connector,
More informationCommunication modules. Serial interface module
2 Bosch Rexroth AG Electric Drives and Controls Documentation 2 serial channels RS232, RS485/422 4 digital inputs/outputs M12 Technical data S67-RS-UNI-M12 Local bus interface Designation System bus M12
More informationTemperature module. 4 inputs for resistance thermometers
2 Bosch Rexroth AG Electric Drives and Controls Documentation 4 inputs, M12 Resistance thermometer, resistors, potentiometer Technical data S67-AI4-RTD-M12 Local bus interface Designation System bus M12
More informationServo drives. SafeMotion
2 Bosch Rexroth AG Electric Drives and Controls Documentation Instructions Intelligent and reliable Safety category 3, PL d, SIL 2 Extensive safety functions Minimum response times Independent of the control
More informationControl hardware. IndraControl L75
2 Bosch Rexroth AG Electric Drives and Controls Documentation Advantages: Scalable hardware platform Standardized communication interfaces Optional extension through function and technology modules Ideal
More informationPanel PC. 15" wide-screen display IndraControl VPP 15
15" wide-screen display IndraControl VPP 15 2 Bosch Rexroth AG Electric Drives and Controls Technical data VPP 15.3 Processor CPU Celeron P4500 1.86 GHz Core i5-520m 2.4 GHz Core i7-620m 2.66 GHz Core
More informationHMI/industrial PC. Plug-in card Sercos master module Sercans
Plug-in card Sercos master module Sercans 2 Bosch Rexroth AG Electric Drives and Controls Documentation Sercans is an active Sercos master module to support up to 254 devices, regardless of operating system,
More informationIndraLogic L Controller based
IndraLogic L Controller based www.brberg.ru brberg@ya.ru Тел. (499) 703-31-61 2 Bosch Rexroth AG Electric Drives and Controls Documentation Powerful, with extensive functionality and interfaces Scalable
More informationPLC. IndraLogic V PC-based
IndraLogic V PC-based 2 Bosch Rexroth AG Electric Drives and Controls Documentation High performance with comprehensive functions and numerous interfaces Scalable with the innovative IndraControl V platform
More informationPLC. IndraLogic L Controller-based
IndraLogic L Controller-based 2 Bosch Rexroth AG Electric Drives and Controls Documentation High performance with comprehensive functions and numerous interfaces Scalable with the innovative IndraControl
More informationServo Drives. Compact Drives IndraDrive Cs
Compact Drives IndraDrive Cs 2 Bosch Rexroth AG Electric Drives and Controls Documentation ighly versatile, extremely compact drives 100 W 3.5 kw Ethernet-based communications, multi-protocol support Innovative
More informationServo drives. Control units 1G IndraDrive (BASIC, ADVANCED)
Control units 1G IndraDrive (BASIC, ADVANCED) 2 Bosch Rexroth AG Electric Drives and Controls Documentation Project planning manual Scalable performance and functionality Individual solutions for standard
More informationIndraDrive Cs Multiprotocol-capable compact drive system
IndraDrive Cs Multiprotocol-capable compact drive system 2 IndraDrive Cs compact drives with Ethernet-based communication With the new, compact IndraDrive Cs drive system, Rexroth is expanding the lower
More informationCompact PC IndraControl VPB
Compact PC IndraControl VPB www.brberg.ru brberg@ya.ru Тел. (499) 703-31-61 2 Bosch Rexroth AG Electric Drives and Controls Documentation Technical data VPB 40.3 Slot 1 VPB 40.3 Slot 2 VPB 40.3 Slot 4
More informationIndraDrive Cs Multiprotocol-capable compact drive system
IndraDrive Cs Multiprotocol-capable compact drive system 2 IndraDrive Cs compact drives with Ethernet-based communication With the new, compact IndraDrive Cs drive system, Rexroth is expanding the lower
More informationRexroth IndraDrive Cs Multiprotocol-capable compact drives
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Rexroth IndraDrive Cs Multiprotocol-capable compact drives Universal, intelligent and economical 2 Rexroth
More informationSynchronized motion control functionality IndraWorks The Tool for All Engineering Tasks
2 Bosch Rexroth AG Electric Drives and Controls Documentation Documentation Cutting-edge control hardware with numerous extension options The latest kernel IndraLogic 2G (based on CoDeSys V3) High-performance
More information2 Bosch Rexroth AG Electric Drives and Controls. Technical data. PLC IndraLogic XLC. Documentation Documentation
2 Bosch Rexroth AG Electric Drives and Controls Documentation Documentation Cutting-edge control hardware with numerous extension options The latest kernel IndraLogic 2G (based on CoDeSys V3) High-performance
More informationMotion logic. Drive based IndraMotion MLD
Drive based IndraMotion MLD 2 Bosch Rexroth AG Electric Drives and Controls Documentation Brochures Instructions Compact and powerful Certified safety technology Drive-integrated motion logic control according
More informationSafeLogic compact Safety in a small format
in a small format 2 on Board integrated, certified and seamless on Board stands for intelligent safety solutions developed by Rexroth to protect man and machine. This innovative safety solution meets the
More informationMotion logic system. IndraMotion MLC Controller-based
IndraMotion MLC Controller-based 2 Bosch Rexroth AG Electric Drives and Controls Simple, open, and flexible Documentation Application description Brochures Brochure IndraMotion MLC for hydraulic drives
More informationGoTo North America Focused Delivery Program Tightening Technology
GoTo North America Focused Delivery Program Tightening Technology Tightening Technology GoTo Catalog Bosch Rexroth is pleased to present our Automation GoTo Product catalog as part of our GoTo Focused
More informationMotion-Logic system. IndraMotion MLC Controller based
IndraMotion MLC Controller based 2 Bosch Rexroth AG Electric Drives and Controls Documentation Application description Simple, open and flexible Integrated runtime system with motion, robot and logic controls
More informationMotion logic system. IndraMotion MLC Control hardware IndraControl L
IndraMotion MLC Control hardware IndraControl L 2 Bosch Rexroth AG Electric Drives and Controls Documentation System overview Functional description Sercos, PROFIBUS and Multi-Ethernet Onboard Functional
More informationManifolds. Standard manifolds common cavity Standard manifolds special cavity Manifolds with emergency screw. Summary. General specifications
Manifolds RE 18325-85/01.11 1/16 Replaces: RE 18325-85/02.10 Standard manifolds common cavity Standard manifolds special cavity Manifolds with emergency screw Summary Description Standard manifold common
More informationCNC. Compact, 6 axes IndraMotion MTX micro
Compact, 6 axes IndraMotion MTX micro 2 Bosch Rexroth AG Electric Drives and Controls Documentation Broschures Easy startup Software Hardware IndraMotion MTX micro efficiency with a full scope of functions
More informationMotion-Logic. Drive based IndraMotion MLD
Drive based IndraMotion MLD 2 Bosch Rexroth AG Electric Drives and Controls Documentation Brochure Instructions Compact and powerful Certified safety technology Drive-integrated motion-control according
More informationCNC. Modular, 64 axes IndraMotion MTX performance, IndraMotion MTX advanced
Modular, 64 axes IndraMotion MTX performance, IndraMotion 2 Bosch Rexroth AG Electric Drives and Controls Documentation Broschures Software IndraMotion MTX performance & advanced the high-performance controls
More informationBosch Rexroth Frequency Converter
Bosch Rexroth Frequency Converter Multi-Pump Water Supply System Application Instruction R912006858 Edition 01 Application Background Constant pressure water supply system (also called multipump application)
More informationField bus connections Link structure BDC Link structure BDC, B-design. Brochure
Field bus connections, B-design Brochure Field bus connections, B-design Bus coupler with driver Direct field bus connection (BDC) Bus coupler with driver direct field bus connection Field bus protocol:
More informationIndraDrive Mi Intelligent, decentralized drive technology
IndraDrive Mi Intelligent, decentralized drive technology 2 3 Maximum flexibility in minimal space The new generation of IndraDrive Mi Consumer behavior is changing faster and faster. Producers are now
More informationIndustrial Hydraulics FAQs
Industrial Hydraulics FAQs FAQ Title: Z versus K or K0 in model code Category: Proportional & Servo Valves Sub-Category: Directional Control Valves Bosch Rexroth Corporation Hydraulics 5 City Line Road
More informationRoller Rail Systems. (Additional roller runner blocks SNS R1822, SLS R1823, FXS R1854) R310EN 2315 ( ) The Drive & Control Company
Roller Rail Systems (Additional roller runner blocks SNS R18, SLS R183, FXS R1854) R31EN 315 (1.9) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems
More informationMating connectors and cable sets for valves and sensors in hydraulics
Mating connectors and cable sets for valves and sensors in hydraulics RE 08006/0. Replaces: 04. /4 Table of contents See page to 5 Features Mating connectors and cable sets for the electrical connection
More informationRexroth Inline terminal with one analog output
Electric Drives Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Rexroth Inline terminal with one analog output R911170602 Edition 01 R-IB IL AO 1/SF-PAC 1 analog output 2-wire technology
More informationValve adapters Hägglunds VA 1000
Valve adapters Hägglunds VA 1000 RE 15383 Edition: 12.2015 Replaces: New Valid for Hägglunds motors CA, CB, CBM Maximum flow 1000 l/min (264 gpm) Maximum pressure 350 bar (5076 psi) Example: Adapter Features
More informationService case with test unit for servo-valves without integrated electronics
Service case with test unit for servo-valves without integrated electronics RE 29681/05.11 Replaces: 06.10 1/6 Type VT-SVTSY-1 Series 1X H6100_d Table of contents Contents Page Features 1 Ordering code
More informationCNC. IndraMotion MTX advanced Up to 250 axes
IndraMotion MTX advanced Up to 250 axes 2 Bosch Rexroth AG Electric Drives and Controls IndraMotion MTX advanced the control system with performance plus IndraMotion MTX advanced is the control system
More informationIndraDrive Mi cabinet free for highest flexibility and efficiency
IndraDrive Mi cabinet free for highest flexibility and eiciency 2 3 Maximum flexibility in minimal space The new generation of IndraDrive Mi Consumer behavior is changing faster and faster. Producers are
More informationRexroth AV03 Valve System New Generation, New Geometry, New Technology
Rexroth AV0 Valve System New Generation, New Geometry, New Technology 2 Rexroth AV0 valve system Ingenious A valve system with an innovative design The research and development experts at Bosch Rexroth
More informationRexroth Tightening System 350
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Rexroth Tightening System 350 Easy Automation. Efficient Production. Make way for tightening technology
More informationFrequency Converter Fv SVC/FOC converters for universal applications
Frequency Converter Fv SVC/FOC converters for universal applications 2 Our goal: To be world market leader in providing benefits to customers With our broad portfolio of products and services we are geared
More informationPosition sensor PO1 series 20
Position sensor PO1 series 20 RE 95160 Edition: 09.2013 Replaces: 03.2012 Inductive sensor for position measurement Features Axially moving button with spring preload Inductive element according to the
More informationPneumatic Components for Automatic Systems
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Pneumatic Components for Automatic Systems The Drive & Control
More informationElectric tightening systems Increased productivity and reliability. The system solution at a glance
Electric tightening systems Increased productivity and reliability The system solution at a glance 2 Electric tightening systems Advantages Process: reliable Productivity: high Increasing cost pressure,
More informationQM-HEIGHT SERIES HIGH-PERFORMANCE HEIGHT GAGE PRE1424 SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT
QM-HEIGHT SERIES HIGH-PERFORMANCE HEIGHT GAGE SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT PRE1424 High-Performance Height Gage QM-Height Series Very high accuracy ±(2.4+2.1L/600) μm Built-in air levitation
More informationMInIMAT-Ec. flexible data recording highly accurate
Screwdriving technology Automation Air motors Air tools Handheld Screwdriver electric MInIMAT-Ec straight handle design - torque ranges between 0.03-18 nm pistol-grip design - torque ranges between 0.06-18
More informationMInIMAT-ec. flexible data recording highly accurate
Screwdriving technology Automation Air motors Air tools Handheld Screwdriver electric MInIMAT-ec straight handle design - torque ranges between 0.03-18 nm pistol-grip design - torque ranges between 0.06-18
More informationMating connectors and cable sets for valves and sensors in hydraulics
s and cable sets for valves and sensors in hydraulics RE 08006 Edition: 06-04 Replaces: 0. Features s and cable sets for electrical connection of: - Valve solenoids - Valves with integrated electronics
More informationGoTo North America Focused Delivery Program Tightening Technology. EDITION 2018 Supercedes all other revisions and copies
GoTo North America Focused Delivery Program Tightening Technology EDITION 2018 Supercedes all other revisions and copies World-class technology without the wait Whether you're designing and building machines,
More informationQM-HEIGHT SERIES HIGH-PERFORMANCE HEIGHT GAUGE PRE1424(2) SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT
QM-HEIGHT SERIES HIGH-PERFORMANCE HEIGHT GAUGE SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT PRE1424(2) High-Performance Height Gauge QM-Height Series Best-in-class accuracy ±(2.4+2.1L/600)μm Built-in air
More informationRodless cylinders Rodless cylinders Series RMC. Brochure
Brochure Bosch Rexroth AG Pneumatics -SB Ø 16-32 mm double-acting with magnetic piston Slide bearing guide cushioning: pneumatically, adjustable 4 -SB Ø 16-32 mm double-acting with magnetic piston long
More informationField bus connections Link structure DDL Link structure DDL, bus coupler. Brochure
Brochure 2 Bus coupler with driver link structure DDL, S-design S-design Bus coupler with driver Field bus protocol: ControlNet / EtherNET/IP / MODBUS TCP / TCP/IP Stand-alone bus coupler link structure
More informationPiston rod cylinder Guide cylinders Series MSN. Brochure
Brochure 2 ini slide, narrow version Ø 6-6 mm double-acting with magnetic piston cushioning: elastic with integrated ball rail guide 3 overview overview 9 Sensors and sensor mountings, accessories Sensor,
More informationRE 50220/ Type ABZMS-40. Component series 1X Maximum operating pressure 1 bar 1/10
Float switch with two switching contacts, two programmable switching outputs for temperature, alternatively one programmable switching output and one analog output with display and control unit E 50220/07.0
More informationRexroth IndraMotion for Handling The turn-key automation solution
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Rexroth IndraMotion for Handling The turn-key automation solution Simple, scalable and powerful 2 Rexroth
More informationMaximum control over the tightening process
Maximum control over the tightening process Hi-tech DC tightening systems Brushless electric screwdrivers/nutrunners with direct control of the tightening torque/angle: from 0.1 to 5.6 Nm Power supply
More informationMINIMAT-EC. Handheld Screwdriver electric
Screwdriving Technology Automation Air Motors Air Tools MINIMAT-EC straight handle design - torque ranges between 0.01-25 N m pistol-grip design - torque ranges between 0.06-18 N m angle head design -
More informationA U T O C O L L I M A T O R S
Printed in Germany 229 900 E 04/07 E l e c t r o n i c α A U T O C O L L I M A T O R S Measure With Precision MÖLLER-WEDEL OPTICAL GmbH Rosengarten 10 D-22880 Wedel Tel : +49-41 03-9 37 76 10 Fax: +49-41
More informationCables. U.S. Registered Trademark EN0B-0341GE51 R0402 Copyright 2002 Honeywell Inc. All rights reserved
N20010/N34010 NON-SPRING RETURN DAMPER ACTUATOR 20/34 Nm (177/300 lb-in) FOR MODULATING CONTROL PRODUCT DATA GENERAL These direct-coupled damper actuators provide modulating control for: air dampers, VAV
More informationParametrization instead of programming: HACD-2X Standard Motion Control for electrohydraulic axes
Parametrization instead of programming: HACD-2X Standard Motion Control for electrohydraulic axes 2 Motion Control Motion Control 3 Technology optimized for hydraulics experience from thousands of applications
More informationRACO-ELECTRIC CYLINDER MODULAR SYSTEM HEAVY DUTY SERIES (TYPE 1) SIZE 4,5,6,7,8
SIZE,,,, HIGH-PERFORMANCE ELECTRIC CYLINDERS: ROBUST, RELIABLE AND FLEXIBLE RETRO-FITTING The RACO actuator system is of modular design, and thus enables the combination of the most important integral
More informationCordless Drill Driver A 18 M bl MaxiMAX in the MAFELL-MAX
Cordless Drill Driver A 18 M bl MaxiMAX in the MAFELL-MAX ref.no.: 91A040 EAN: 4032689193274 Transport and storage box MAFELL-MAX Technical data Collar diameter 43 mm Chuck capacity 13 mm Max. drilling
More informationProduct Information. POSITIP PT 8016 Digital Readout for Manually Operated Machine Tools
Product Information POSITIP PT 816 Digital Readout for Manually Operated Machine Tools 11/218 POSITIP PT 816, PT 816 Active The convenient digital readout for milling, drilling, and boring machines, and
More informationN20010, N NON-SPRING RETURN DAMPER ACTUATOR 20/34 Nm (177/300 lb-in) FOR MODULATING CONTROL SPECIFICATIONS GENERAL FEATURES PRODUCT DATA
N21, N341 NON-SPRING RETURN DAMPER ACTUATOR 2/34 Nm (177/3 lb-in) FOR MODULATING CONTROL SPECIFICATIONS Supply voltage Nominal voltage PRODUCT DATA 24 Vac 2%, 5/6 Hz; 24 Vdc -1...+2% 24 Vac, 5/6 Hz; 24
More informationPressure switch RE B/ Type HEDE10.../1/ Operating instructions
Pressure switch Type HEDE10.../1/ RE 30276-B/10.10 Replaces: 06.10 Operating instructions 2/20 Bosch Rexroth AG HEDE10.../1/ RE 30276-B/10.10 Contents 1 Overview of menu...3 2 Safety note... 4 3 Operating
More informationMINIMAT-EC-Servo Screwdriver handheld
Screwdriving Technology Automation Air Motors Air Tools MINIMAT-EC-Servo Screwdriver handheld straight handle design - torque ranges between 0.01-2.0 Nm The flexible EC-Servo screwdriver for low torque
More informationDraw wire sensors, draw wire sensors for displacement, position
Draw wire sensors, draw wire sensors for displacement, position Sensors based on potentiometer and encoder, for industrial and OEM applications for measurement of lengths, stroke, displacement, position,
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 24 Low-cost draw-wire displacement sensors wiresensor MK analog - Robust plastic housing - Customized versions for OEM - Potentiometer, current
More informationITB THROTTLE WITH INTEGRATED STEPPER MOTOR INSTALLATION INSTRUCTION
ITB THROTTLE WITH INTEGRATED STEPPER MOTOR INSTALLATION INSTRUCTION MOTORTECH Gas Engine Accessories P/N 01.50.014 Rev. 12/2014 Copyright Copyright 2014 MOTORTECH GmbH. All rights reserved. Distribution
More informationProject Book for. Tightening System. Document Name.: FGA_ET_PROJECT_BOOK_V2_4.DOCX. Version 2.4. Release Date: Nov2014
Project Book for Tightening System Document Name.: FGA_ET_PROJECT_BOOK_V2_4.DOCX Version 2.4 Release Date: Nov2014 This is a common document valid within Fiat Group Automobiles SpA - Engine & Trasmission
More informationOnline data sheet. S30A-7021EK S3000 Anti Collision SAFETY LASER SCANNERS
Online data sheet S30A-7021EK S3000 Anti Collision A B C D E F system plug not supplied with delivery Ordering information Type Part no. S30A-7021EK 1071544 Usage Can only be used in the EFI system network,
More informationنﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - The complete support for your inspection. Martool The latest information on MARTool products can be found on our website: www.mahr.com, WebCode 10436-5062 MarTool measuring and inspection
More informationService case with test device for proportional valves with integrated electronics (OBE)
Service case with test device for proportional valves with integrated electronics (OBE) Type VT-VETSY-1 RE 29685 Edition: 2014-04 Replaces: 03.11 Component series 1X H 5967_d Features Service case contains
More informationHydraulics with IO-Link: Reduced effort, high value
Hydraulics with IO-Link: Reduced effort, high value Standardized wiring and electronic name plate support commissioning and increase availability Open standard for bi-directional point-to-point connections
More informationApplication report. Gildemeister GMX 400 linear. Turning / milling machine. Data communication:
Application report Gildemeister GMX 400 linear Turning / milling machine Via 3 - function keys of the monitoring system Toolinspect Data communication: CNC-control : Removed material: Digital Siemens 840D
More informationNEW CAPTIS CLAMPING SYSTEM. The modular and flexible system for internal and external clamping
NEW CAPTIS CLAMPING SYSTEM The modular and flexible system for internal and external clamping CAPTIS CLAMPING SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More informationNEW FEATURES FOR 2018
NEW FEATURES FOR 2018 Practice-based ideas for engineering In this brochure: New attachment joint New wall joint Modular command enclosure VESA adjustment Variable handle multipanel/profiplus Current system
More informationDraw wire sensors, draw wire sensors for displacement, position
Draw wire sensors, draw wire sensors for displacement, position Sensors based on potentiometer and encoder, for industrial and OEM applications for measurement of lengths, stroke, displacement, position,
More informationDATA SHEET Rudder/azimuth angle Transmitter CAN, RTC 300/RTC 600
DATA SHEET Rudder/azimuth angle Transmitter CAN, RTC 300/RTC 600 CANopen interface Measuring angle full +/-180 High accuracy Easy zero and CW/CCW adjustm. Continuous shaft rotation DEIF A/S Frisenborgvej
More informationCALIBRATION. Sylvac Dial Gauge Calibrator
Sylvac Dial Gauge Calibrator The Sylvac stand is custom designed for calibrating all types of dial gauges, lever indicators and transducers. It utilises a 25mm / 1" travel Sylvac probe linked to a digital
More informationEasy 3D WLAN CCD kits for ML 1800 and ML TECH+ Wheel alignment with user PC
Easy 3D WLAN CCD kits for ML 1800 and ML TECH+ Wheel alignment with user PC Wireless transfer to tablet PC Saving space without PC cabinet and fewer cables Flexible, mobile and highly accurate Easy 3D:
More informationDraft sensor KMB series 30
Draft sensor KMB series 0 RE 95170 Edition: 09.201 Replaces: 04.2012 Sensor for draft measurement Features Draft sensor according to Category rear three-point attachment (ISO 70-1) Sensor element with
More informationConfigurable Rail File Instructions
Configurable Rail File Instructions 1 3/3/2016 DC-IA/ENG5-US Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the
More informationClosed loop control electronics for test and simulation technology
Closed loop control electronics for test and simulation technology RE 57 803/03.96 Replaces: 05.94 The components described in the following are basic elements of the closed loop control electronics HCE-1
More informationDMA Actuator drives for - Motorised Butterfly Valve DMK - Motorised throttle DML
DMA Actuator drives for - Motorised Butterfly Valve DMK - Motorised throttle DML 11.20 DMA 40 P 230/02 3 L DMA 30 P 230/03 0 L DMA 30 Q 230/10 0 L DMA 30 A 230/10 0 L Printed in Germany Edition 08.14 Nr.
More informationRodless cylinders Bellow actuator Rolling bellow, series BRB. Brochure
Rolling bellow, series R rochure 2 osch Rexroth Pneumatics Rolling bellow, series R 3 Part numbers marked in bold are available from the central warehouse in ermany, see the shopping basket for more detailed
More information