TEST REPORT GUANGMANG TOY FACTORY GUANGMANG TOY FACTORY

Transcription

1 No.202, Building A, Jingye Sanjie, Yushu Industrial Park, Guangzhou Economic & Technology Development Zone, Guangzhou, Guangdong, China Telephone :+86 (0) Fax :+86 (0) Website : TEST REPORT Report No.: STUCSO TY Page : 1 of 13 Company s Name: Company s Address: Applicant s Name: Applicant s Address: Sample Description: Sample Quantity: Style/Item No.: Country of Origin: Test Requested: Labelled Age Grading: Requested Age Grading: Test Age Grading: GUANGMANG TOY FACTORY Lianshang Industrial Area, Chenghai District, Shantou City, Guangdong, China GUANGMANG TOY FACTORY Lianshang Industrial Area, Chenghai District, Shantou City, Guangdong, China Sports toys series 7 SET See the next page CHINA (1) EN 71-1:2014 Safety of toys Part 1: Mechanical and Physical Properties (2) EN 71-2:2011+A1:2014 Safety of toys Part 2: Flammability (3) EN 71-3:2013+A1:2014 Safety of toys Part 3: Migration of Certain Elements Over 3 Years Over 3 Years Over 3 Years Sample Receiving Date: Aug 5, 2015 Test Period: Aug 5, 2015 to Aug 10, 2015 Issue of Date: Aug 28, 2015 Test Results: Conclusion: on: See the attachment in detail PASS Terry Yang Section Head _ Toby Tan Section Manager This report refers to the General Conditions for Inspection and Testing Services, printed overleaf. This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the STU PRODUCT CERTIFICATION MARK. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of STU International Electrical Approvals or testing done by STU International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by STU International Electrical Approvals in writing. All test results in this report can be traceable to National or International Standards.

2 Page 2 of 13 Style/Item No.: 512, 512-1, 512-2, 512-3, 512-4, 512-5, 512-6, 512-7, 512-8, 512-9, 313, 313-1, 313-2, 313-3, 313-4, 313-5, 313-6, 313-7, 313-8, 313-9, 333, 333-1, 333-2, 333-3, 333-4, 333-5, 333-6, 333-7, 333-8, 333-9, 611, 611-1, 611-2, 611-3, 611-4, 611-5, 611-6, 611-7, 611-8, 611-9, 518, 518-1, 518-2, 518-3, 518-4, 518-5, 518-6, 518-7, 518-8, 518-9, 519, 519-1, 519-2, 519-3, 519-4, 519-5, 519-6, 519-7, 519-8, 519-9, 8807A, 8813, 8812, 8816, 8816D, 8816AD 8816A7, 8819A, 8819A2, 8819D, 8819AD, 8819A5, 8819A7, 8819A-4D, 8819E, 8819F, 8819H, 8819I, 8822, S, S1, S2, 8822B1, 8822B2, 8822A, 8822A2, 8822A-1, 8822AD, 8822A5, 8822A7 8822A-4, 8822A-4D, 8822D, 8822E, 8822F, 8822H, 8822I, 8825, 8825A, 8825A-1, 8825A-4D, 8825A2, , 8825B1, 8825B2, , , , 8819A-3, 8819A-3B, , , 8822B1, 8822B2, 8825E, 8825F, 8825H, 8825I, 886, 888, 889B, 8655, 8660, 8665, 8675, 3366, , 1012D, 1012E, 1012F, 8819D1, 8819D6, 8819D7, 882D1,882D6, 882D7, S6, S7, , A, A, B

3 Page 3 of 13 Test Result: European Standard on Safety of Toys (1) Mechanical and physical properties As Specified in European Standard on Safety of Toys EN 71 Part 1 EN 71-1:2014 Clause Requirement Result Verdict 4 General requirements P 4.1 Materials cleanliness Clean and free from infestation P 4.2 Assembly 4.3 Flexible plastic sheeting 4.4 Toy bags 4.5 Glass 4.6 Expanding materials 4.7 Edges No hazardous sharp edge P 4.8 Points and metallic wires No hazardous sharp point P 4.9 Protruding parts 4.10 Parts moving against each other Folding and sliding mechanisms Driving mechanisms Hinges Springs 4.11 Mouth-actuated toys and other toys intend to be put in the mouth 4.12 Balloons

4 Page 4 of 13 EN 71-1:2014 Clause Requirement Result Verdict 4.13 Cords of toy kites and other flying toys 4.14 Enclosures Toys which a child can enter Masks and helmets 4.15 Toys intended to bear the mass of a child Toys propelled by a child or by other means Toy bicycles Rocking horses and similar toys Toys not propelled by a child Toy scooters 4.16 Heavy immobile toys 4.17 Projectiles P General P Projectile toys without stored energy Projectile toys with stored energy Bows and arrows 4.18 Aquatic toys and inflatable toys 4.19 Percussion caps specifically designed for use in toys and toys using percussion caps 4.20 Acoustics 4.21 Toys containing a non-electrical heat source 4.22 Small balls P

5 Page 5 of 13 EN 71-1:2014 Clause Requirement Result Verdict 4.23 Magnets General Toys other than magnetic/electrical experimental sets intended for children over 8 years Magnetic/electrical experimental sets intended for children over 8 years 4.24 Yo-yo balls 4.25 Toy attached to food 5 Toys intended for children under 36 months 5.1 General requirements See remark Soft-filled toys and soft-filled parts of a toy 5.3 Plastic sheeting 5.4 Cords, chains and electrical cables in toys 5.5 Liquid-filled toys 5.6 Speed limitation of electrically-driven ride-on toys 5.7 Glass and porcelain 5.8 Shape and size of certain toys 5.9 Toys comprising monofilament fibres 5.10 Small balls 5.11 Play figures 5.12 Hemispheric-shaped toys 5.13 Suction cups

6 Page 6 of 13 EN 71-1:2014 Clause Requirement Result Verdict 5.14 Straps intended to be worn fully or partially around the neck 6 Packaging 7 Warnings, markings and instructions for use See remark General P 7.2 Toys not intended for children under 36 months P 7.3 Latex balloons 7.4 Aquatic toys 7.5 Functional toys 7.6 Hazardous sharp functional sharp edges and points 7.7 Projectiles Toys with projectiles which are able to discharge an object other than that provided with the toy Toys capable of discharging a projectile with a kinetic energy greater than 0,08 J 7.8 Imitation projective masks and helmets 7.9 Toy kites 7.10 Roller skates, inline skates, skateboards and certain other ride-on toy Roller skates, inline skates and skateboards Ride-on toys without a braking device Electrically-driven ride-on toys Instructions for use 7.11 Toys intended to be attached to or strung across a cradle, cot, or perambulator

7 Page 7 of 13 EN 71-1:2014 Clause Requirement Result Verdict 7.12 Liquid-filled teethers 7.13 Percussion caps specifically designed for use in toys 7.14 Acoustics 7.15 Toy bicycles 7.16 Toys intended to bear the mass of a child 7.17 Toys comprising monofilament fibres 7.18 Toy scooters 7.19 Rocking horses and similar toys 7.20 Magnetic/electrical experimental sets 7.21 Toys with electrical cables exceeding 300 mm in length 7.22 Toys with cords or chains intended for children of 18 months and over but under 36 months Remark 1: Toy parts become detached as small balls after test. It is acceptable because appropriate age warning was found on the packaging. Remark 2: Additional information according to the Toy Safety Directives 2009/48/EC requirement. These information also appears as a note within the EN71 but are not standard requirements: Marking: The manufacturer's and importer's name, registered trade name or registered trade mark, the address and type, batch, serial or model number or other element allowing their identification shall be indicated on the product itself. In addition, toys shall also bear the CE-marking. After checking, it was found that: - CE-marking was on the packaging. - Manufacturer's name was on the packaging. - Importer's name and address were on the packaging. - Product name, model number and identification code were on the packaging. - Instructions and safety information was used English. - Age grading was on the packaging.

8 Page 8 of 13 - Country of origin on the packaging.

9 Page 9 of 13 (2) Flammability Test As Specified in European Standard on Safety of Toys EN 71 Part 2 EN 71-2:2011+A1:2014 Clause Requirement Result Verdict 4 Requirements P 4.1 General requirements P 4.2 Toys to be worn on the head 4.3 Toy disguise costumes and toys intended to be worn by a child in play 4.4 Toys intended to be entered by a child 4.5 Soft-filled toys Abbreviation: P = Pass; F = Fail; = Not Applicable Note: All test result are only valid for the samples being tested.

10 Page 10 of 13 (3) Migration of Certain Elements - European Parliament and Council Directive 2009/48/EC, Annex II, Part III, Point 13 with Amendments up to European Commission Directive 2012/7/EU Test Method : European Standard EN 71-3:2013+A1:2014 Clause 7, 8 and Annex E See Soluble Element (Parameter) and its corresponding Maximum Allowable Limit (Req.) in Result Table Type I Type II Type III Dry, brittle, powder-like or pliable toy material Liquid or sticky toy material Scraped-off toy material - Unit Req. Result Test Item(s) - - MDL Type - III III III III III III III Parameter Mass of Trace Amount g Aluminium (Al) mg/kg ND ND ND ND ND Antimony (Sb) mg/kg ND ND ND ND ND Arsenic (As) mg/kg 47 5 ND ND ND ND ND Barium (Ba) mg/kg ND ND ND ND ND Boron (B) mg/kg ND ND ND ND ND Cadmium (Cd) mg/kg 17 2 ND ND ND ND ND Chromium III (Cr III) mg/kg ND ND ND ND ND Chromium VI (Cr VI) mg/kg ND ND ND ND ND Cobalt (Co) mg/kg ND ND ND ND ND Copper (Cu) mg/kg ND ND ND ND ND Lead (Pb) mg/kg ND ND ND ND ND Manganese (Mn) mg/kg ND ND ND ND ND Mercury (Hg) mg/kg ND ND ND ND ND Nickel (Ni) mg/kg ND ND ND ND ND Selenium (Se) mg/kg ND ND ND ND ND Strontium (Sr) mg/kg ND ND ND ND ND Tin (Sn) mg/kg ND ND ND ND ND Organic tin mg/kg ND ND ND ND ND Zinc (Zn) mg/kg ND ND ND ND ND Conclusion PASS PASS PASS PASS PASS

11 Page 11 of 13 - Unit Req. Result Test Item(s) - - MDL Type - III III III Parameter Mass of Trace Amount g Aluminium (Al) mg/kg ND Antimony (Sb) mg/kg ND Arsenic (As) mg/kg 47 5 ND Barium (Ba) mg/kg ND Boron (B) mg/kg ND Cadmium (Cd) mg/kg 17 2 ND Chromium III (Cr III) mg/kg ND Chromium VI (Cr VI) mg/kg ND Cobalt (Co) mg/kg ND Copper (Cu) mg/kg ND Lead (Pb) mg/kg ND Manganese (Mn) mg/kg ND Mercury (Hg) mg/kg ND Nickel (Ni) mg/kg ND Selenium (Se) mg/kg ND Strontium (Sr) mg/kg ND Tin (Sn) mg/kg ND Organic tin mg/kg ND Zinc (Zn) mg/kg ND Conclusion PASS

12 Page 12 of 13 Sample description: Test Item Sample description: 1 Red plastic-ball/ baseball bat 2 Yellow plastic- ball/bowling pin 3 White plastic-bowling pin 4 Blue plastic- ball/bowling pin 5 Green plastic- ball/bowling pin 6 Yellow EVA-bullet Remark Selected tests were specified by the client, other materials/items were not tested. Note / Key : ND = Not detected > = Greater than Req. = Requirement NR = Not requested g = gram(s) INCON. = Inconclusive mg/kg = milligram(s) per kilogram = ppm = part(s) per million [ ] = Detection Limit by Ion Chromatography Analysis { } = Detection Limit by EN 71-3:2013+A1:2014, Annex F.3

13 Page 13 of 13 APPENDIX PHOTO OF THE SUBMITTED SAMPLE(S) General view Figure 1 Figure 2 STU authenticate the photo(s) on original report only END OF REPORT