Important Notice. Other models of Tower Lights. Other tower lights are available on special order - examples:
|
|
|
- Valentine Simon
- 5 years ago
- Views:
Transcription
1
2 ITC s Tower Lights (Stack Lights) are designed for efficient signal, alarm and monitoring of machinery, remote equipment, etc. These devices are supplied ready for installation, complete with high-luminosity, side-projecting BA15s LED bulbs, with or without an audible alarm (siren) when applicable, as well as all wiring and mounting hardware. Each tower light is composed of one to five layers (light units) and one base (including optional 90 db audible alarm). Pole-mounted models (type TPT-) include one pole Ø21.9mm (standard length 288mm overall, 255mm to locknuts other lengths available upon request)) and one mounting bracket 90 for side-mounting. The pole can also be direct-mounted on the top of the machine or cabinet be means of two locknuts. Base-mounted (or: Flangemounted ) models (type TPW-) are equipped with a flange dia. 80mm for direct mounting on the surface of the cabinet, panel or machine. Approximately 400mm of wiring is supplied. The following options and accessories are available: Light units: o One to five, colours red (R), orange (O), green (G), blue (B) or white (W) o 40mm (models TPTL4, TPTF4, TPTS4, TPWL4 and TPWF4) outside diameter or 50mm (models TPTL5, TPTF5, TPTS5, TPWL5 and TPWF5) outside diameter o Light units are stacked at factory and cannot be removed All types of Tower lights are available with LED bulbs, 12 V (AC/DC), 24 V (AC/DC) or V (AC) Types of operation available include: Type TP..L with fixed lights only; type TP..F with fixed or flashing lights; and Type TP..S with fixed or flashing lights plus audible alarm Optional 90 flange attachment, optional straight flange attachment, or optional universal 90 /180 pole attachment Replacement lenses and bulbs for each of the five colours above - BA15s base Important Notice The sequence of colors on all STANDARD models of tower lights is the following (from top to bottom) #1 (ltop) #2 #3 #4 #5 (bottom) Single Light Red Two Lights Red Orange (Amber) Three lights Red Orange (Amber) Green - - Four Lights Red Orange (Amber) Green Blue - Five Lights Red Orange (Amber) Green Blue White However, any other sequence of colors is available upon request. Tower lights with non-standard sequences of colors are considered Special products and are nonreturnable. Other models of Tower Lights Other tower lights are available on special order - examples: 60mm or 70mm diameter versions Fixed light models + alarm 2 meter long cables Please contact ITC with your requirements. 2
3 TPT Pole-Mounted Tower Lights TPT Pole-Mounted Tower Lights (Order by Part No.) Part No. Description TPTL (fixed light) TPTF (fixed/flash light) TPTS (fixed/flash with siren) TPTL4-L11R TPTF4-L11R TPTS4-L11R Ø40mm Pole mount LED Tower Light, Red, 110Vac TPTL4-L12RG TPTF4-L12RG TPTS4-L12RG Ø40mm Pole mount LED Tower Light, R/G, 110Vac TPTL4-L13ROG TPTF4-L13ROG TPTS4-L13ROG Ø40mm Pole mount LED Tower Light, R/O/G, 110Vac TPTL4-L14ROGB TPTF4-L14ROGB TPTS4-L14ROGB Ø40mm Pole mount LED Tower Light, R/O/G/B, 110Vac TPTL4-L15ROGBW TPTF4-L15ROGBW TPTS4-L15ROGBW Ø40mm Pole mount LED Tower Light, R/O/G/B/W, 110Vac TPTL4-L71R TPTF4-L71R TPTS4-L71R Ø40mm Pole mount LED Tower Light, Red, 24Vac/dc TPTL4-L72RG TPTF4-L72RG TPTS4-L72RG Ø40mm Pole mount LED Tower Light, R/G, 24Vac/dc TPTL4-L73ROG TPTF4-L73ROG TPTS4-L73ROG Ø40mm Pole mount LED Tower Light, R/O/G, 24Vac/dc TPTL4-L74ROGB TPTF4-L74ROGB TPTS4-L74ROGB Ø40mm Pole mount LED Tower Light, R/O/G/B, 24Vac/dc TPTL4-L75ROGBW TPTF4-L75ROGBW TPTS4-L75ROGBW Ø40mm Pole mount LED Tower Light, R/O/G/B/W, 24Vac/dc TPTL4-L91R TPTF4-L91R TPTS4-L91R Ø40mm Pole mount LED Tower Light, Red, 12Vac/dc TPTL4-L92RG TPTF4-L92RG TPTS4-L92RG Ø40mm Pole mount LED Tower Light, R/G, 12Vac/dc TPTL4-L93ROG TPTF4-L93ROG TPTS4-L93ROG Ø40mm Pole mount LED Tower Light, R/O/G, 12Vac/dc TPTL4-L94ROGB TPTF4-L94ROGB TPTS4-L94ROGB Ø40mm Pole mount LED Tower Light, R/O/G/B, 12Vac/dc TPTL4-L95ROGBW TPTF4-L95ROGBW TPTS4-L95ROGBW Ø40mm Pole mount LED Tower Light, R/O/G/B/W, 12Vac/dc TPTL5-L11R TPTF5-L11R TPTS5-L11R Ø50mm Pole mount LED Tower Light, Red, 110Vac TPTL5-L12RG TPTF5-L12RG TPTS5-L12RG Ø50mm Pole mount LED Tower Light, R/G, 110Vac TPTL5-L13ROG TPTF5-L13ROG TPTS5-L13ROG Ø50mm Pole mount LED Tower Light, R/O/G, 110Vac TPTL5-L14ROGB TPTF5-L14ROGB TPTS5-L14ROGB Ø50mm Pole mount LED Tower Light, R/O/G/B, 110Vac TPTL5-L15ROGBW TPTF5-L15ROGBW TPTS5-L15ROGBW Ø50mm Pole mount LED Tower Light, R/O/G/B/W, 110Vac TPTL5-L71R TPTF5-L71R TPTS5-L71R Ø50mm Pole mount LED Tower Light, Red, 24Vac/dc TPTL5-L72RG TPTF5-L72RG TPTS5-L72RG Ø50mm Pole mount LED Tower Light, R/G, 24Vac/dc TPTL5-L73ROG TPTF5-L73ROG TPTS5-L73ROG Ø50mm Pole mount LED Tower Light, R/O/G, 24Vac/dc TPTL5-L74ROGB TPTF5-L74ROGB TPTS5-L74ROGB Ø50mm Pole mount LED Tower Light, R/O/G/B, 24Vac/dc TPTL5-L75ROGBW TPTF5-L75ROGBW TPTS5-L75ROGBW Ø50mm Pole mount LED Tower Light, R/O/G/B/W, 24Vac/dc TPTL5-L91R TPTF5-L91R TPTS5-L91R Ø50mm Pole mount LED Tower Light, Red, 12Vac/dc TPTL5-L92RG TPTF5-L92RG TPTS5-L92RG Ø50mm Pole mount LED Tower Light, R/G, 12Vac/dc TPTL5-L93ROG TPTF5-L93ROG TPTS5-L93ROG Ø50mm Pole mount LED Tower Light, R/O/G, 12Vac/dc TPTL5-L94ROGB TPTF5-L94ROGB TPTS5-L94ROGB Ø50mm Pole mount LED Tower Light, R/O/G/B, 12Vac/dc TPTL5-L95ROGBW TPTF5-L95ROGBW TPTS5-L95ROGBW Ø50mm Pole mount LED Tower Light, R/O/G/B/W, 12Vac/dc 40mm 50mm Dimensions of complete TPT pole-mounted tower lights (mm) Type TPTL4 Type TPTF4 / TPTS4 Type TPTL5 Type TPTF5 / TPTS5 No. of Light units Pole length (above mounting bracket) Tower height (above pole) Total height Tower height (above pole) Total height Tower height (above pole) Total height Tower height (above pole) Total height 3
4 TPW Base-Mounted Tower Lights TPW Base-Mounted Tower Lights (Order by Part No.) Part No. TPWL TPWB TPWF (fixed light) (fixed with siren) (fixed/flash light) 40mm 50mm Description TPWL4-L11R TPWB4-L11R TPWF4-L11R Ø40mm Base (flange) mount LED Tower Light, Red, 110Vac TPWL4-L12RG TPWB4-L12RG TPWF4-L12RG Ø40mm Base (flange) mount LED Tower Light, R/G, 110Vac TPWL4-L13ROG TPWB4-L13ROG TPWF4-L13ROG Ø40mm Base (flange) mount LED Tower Light, R/O/G, 110Vac TPWL4-L14ROGB TPWB4-L14ROGB TPWF4-L14ROGB Ø40mm Base (flange) mount LED Tower Light, R/O/G/B, 110Vac TPWL4-L15ROGBW TPWB4-L15ROGBW TPWF4-L15ROGBW Ø40mm Base (flange) mount LED Tower Light, R/O/G/B/W, 110Vac TPWL4-L71R TPWB4-L71R TPWF4-L71R Ø40mm Base (flange) mount LED Tower Light, Red, 24Vac/dc TPWL4-L72RG TPWB4-L72RG TPWF4-L72RG Ø40mm Base (flange) mount LED Tower Light, R/G, 24Vac/dc TPWL4-L73ROG TPWB4-L73ROG TPWF4-L73ROG Ø40mm Base (flange) mount LED Tower Light, R/O/G, 24Vac/dc TPWL4-L74ROGB TPWB4-L74ROGB TPWF4-L74ROGB Ø40mm Base (flange) mount LED Tower Light, R/O/G/B, 24Vac/dc TPWL4-L75ROGBW TPWB4-L75ROGBW TPWF4-L75ROGBW Ø40mm Base (flange) mount LED Tower Light, R/O/G/B/W, 24Vac/dc TPWL4-L91R TPWB4-L91R TPWF4-L91R Ø40mm Base (flange) mount LED Tower Light, Red, 12Vac/dc TPWL4-L92RG TPWB4-L92RG TPWF4-L92RG Ø40mm Base (flange) mount LED Tower Light, R/G, 12Vac/dc TPWL4-L93ROG TPWB4-L93ROG TPWF4-L93ROG Ø40mm Base (flange) mount LED Tower Light, R/O/G, 12Vac/dc TPWL4-L94ROGB TPWB4-L94ROGB TPWF4-L94ROGB Ø40mm Base (flange) mount LED Tower Light, R/O/G/B, 12Vac/dc TPWL4-L95ROGBW TPWB4-L95ROGBW TPWF4-L95ROGBW Ø40mm Base (flange) mount LED Tower Light, R/O/G/B/W, 12Vac/dc TPWL5-L11R TPWB5-L11R TPWF5-L11R Ø50mm Base (flange) mount LED Tower Light, Red, 110Vac TPWL5-L12RG TPWB5-L12RG TPWF5-L12RG Ø50mm Base (flange) mount LED Tower Light, R/G, 110Vac TPWL5-L13ROG TPWB5-L13ROG TPWF5-L13ROG Ø50mm Base (flange) mount LED Tower Light, R/O/G, 110Vac TPWL5-L14ROGB TPWB5-L14ROGB TPWF5-L14ROGB Ø50mm Base (flange) mount LED Tower Light, R/O/G/B, 110Vac TPWL5-L15ROGBW TPWB5-L15ROGBW TPWF5-L15ROGBW Ø50mm Base (flange) mount LED Tower Light, R/O/G/B/W, 110Vac TPWL5-L71R TPWB5-L71R TPWF5-L71R Ø50mm Base (flange) mount LED Tower Light, Red, 24Vac/dc TPWL5-L72RG TPWB5-L72RG TPWF5-L72RG Ø50mm Base (flange) mount LED Tower Light, R/G, 24Vac/dc TPWL5-L73ROG TPWB5-L73ROG TPWF5-L73ROG Ø50mm Base (flange) mount LED Tower Light, R/O/G, 24Vac/dc TPWL5-L74ROGB TPWB5-L74ROGB TPWF5-L74ROGB Ø50mm Base (flange) mount LED Tower Light, R/O/G/B, 24Vac/dc TPWL5-L75ROGBW TPWB5-L75ROGBW TPWF5-L75ROGBW Ø50mm Base (flange) mount LED Tower Light, R/O/G/B/W, 24Vac/dc TPWL5-L91R TPWB5-L91R TPWF5-L91R Ø50mm Base (flange) mount LED Tower Light, Red, 12Vac/dc TPWL5-L92RG TPWB5-L92RG TPWF5-L92RG Ø50mm Base (flange) mount LED Tower Light, R/G, 12Vac/dc TPWL5-L93ROG TPWB5-L93ROG TPWF5-L93ROG Ø50mm Base (flange) mount LED Tower Light, R/O/G, 12Vac/dc TPWL5-L94ROGB TPWB5-L94ROGB TPWF5-L94ROGB Ø50mm Base (flange) mount LED Tower Light, R/O/G/B, 12Vac/dc TPWL5-L95ROGBW TPWB5-L95ROGBW TPWF5-L95ROGBW Ø50mm Base (flange) mount LED Tower Light, R/O/G/B/W, 12Vac/dc Dimensions of complete TPW base-mounted tower lights (mm) No. of Type Type Type Type Light TPWL4 TPWF4/TPWB4 TPWL5 TPWF5/TPWB5 units Total height Total height Total height Total height All dimensions in mm 4 TPWL-TPWF
5 Accessories and Spare Lenses Accessories (Order by Part No.) Part No. Description TPT-L6A 90 degrees mounting bracket, plastic TPT-L6F Universal 90/180 degrees base for pole TPT-L6S Straight flange base for pole, Ø22mm TPT-L-S Straight flange base for pole, Ø16mm TPT-L507 Replacement base TPT-L511-1 Special short pole 138mm TPT-L611-5 Replacement std. pole 288mm Spare Lenses (Order by Part No.) Part No. Description TPL40/1 Replacement lens for Tower light, Ø40mm, white TPL40/3 Replacement lens for Tower light, Ø40mm, green TPL40/4 Replacement lens for Tower light, Ø40mm, red TPL40/5 Replacement lens for Tower light, Ø40mm, amber TPL40/6 Replacement lens for Tower light, Ø40mm, blue TPL50/1 Replacement lens for Tower light, Ø50mm, white TPL50/3 Replacement lens for Tower light, Ø50mm, green TPL50/4 Replacement lens for Tower light, Ø50mm, red TPL50/5 Replacement lens for Tower light, Ø50mm, amber TPL50/6 Replacement lens for Tower light, Ø50mm, blue 5
6 Spare Lamps (bulbs) BA15s LED Cluster Lamps, Side-Projecting (Order by Part No.) Color Voltage Part No. Part No. N. of For 40mm tower lights 8 LEDs For 50mm tower lights LEDs for RL8 Part No. For 40 or 50mm tower lights 12 LEDs White 12V AC/DC RL9-CL1-12 RL8-CL RL4-CL-12 Green 12V AC/DC RL9-CL RL4-CL3-12 Red 12V AC/DC RL9-CL RL4-CL4-12 Amber 12V AC/DC RL9-CL RL4-CL5-12 Blue 12V AC/DC RL9-CL RL4-CL6-12 White 24V AC/DC RL9-CL1-24 RL8-CL RL4-CL1-24 White 24V DC - RL8-CL1-24DC 15 - Green 24V AC/DC RL9-CL3-24 RL8-CL RL4-CL3-24 Green 24V DC - RL8-CL3-24DC 10 - Red 24V AC/DC RL9-CL4-24 RL8-CL RL4-CL4-24 Red 24V DC - RL8-CL4-24DC 10 - Amber 24V AC/DC RL9-CL5-24 RL8-CL /15 RL4-CL5-24 Amber 24V DC - RL8-CL5-24DC 10 - Blue 24V AC/DC RL9-CL6-24 RL8-CL RL4-CL6-24 Blue 24V DC - RL8-CL6-24DC 10 - White 110V AC RL9-CL1-110 RL8-CL RL4-CL1-110 Green 110V AC RL9-CL3-110 RL8-CL /15 RL4-CL3-110 Red 110V AC RL9-CL4-110 RL8-CL /15 RL4-CL4-110 Amber 110V AC RL9-CL5-110 RL8-CL RL4-CL5-110 Blue 110V AC RL9-CL6-110 RL8-CL RL4-CL6-110 RL9 style RL8 style with 15 LEDs RL4 style Related Products available from ITC Led, Incandescent and Neon Signal Lamps (Bulbs) Monobloc LED Indicator Lights and Buzzers 22.5mm Pushbuttons, Selectors and Indicators Palm-Type and Wobble-Type E-stop Buttons Different models, steady / flashing / bi-color / with buzzer Voltages 6V to 220V, sockets Ba9s, Ba15d, Ba15s, E10 A complete range of 22.5mm metal pushbuttons, selectors, e-stops and pilot lights Large size (90mm) Emergency-Stop (E-Stop or Mushroom ) 22.5mm pushbuttons, in Palm-type and Wobble-type 6
7 Wiring Diagrams 7
8
S 180 OPTICAL AND AUDIBLE MODULAR DEVICES. This is our idea that lead us to create and engineering this modular lamp. MODULAR CONFIGURATION
S 180 OPTICAL AND AUDIBLE MODULAR DEVICES S180 a custom made lamp This is our idea that lead us to create and engineering this modular lamp. custom solutions keeping minimized costs and stock 10 different
Push Buttons and Operator Interface Specifier s Guide Type XVA Indicating Banks and Beacons
Push Buttons and Operator Interface Specifier s Guide Type XVA Indicating Banks and Beacons File 9001 CONTENTS Schneider Electric Brands Description....................................................Page
Push buttons and selectors
Accessories and spare parts 8 LM2T A130 8 LM2T A140 8 LM2T A185 8 LM2T AL... Order code Description Qty per Wt 8 LM2T A12❶ Coloured diffuser for 10 0.001 double touch buttons 8 LM2T A130 Threaded plug
Signal Tower KombiSIGN 50
Signal Tower Simple operation thanks to bayonet mechanism WERMA was the first signal beacon manufacturer to offer a bayonet mechanism allowing elements to be mechanically and electrically connected within
KombiSIGN 71 - Signal Tower
KombiSIGN 71 - Signal Tower Size comparison KombiSIGN 71/40 Signalisation Index Optical Audible 2 tone/8 tone 105 db Siren Vocal element Permanent Light 2 Continuous tone 3 5 LED Permanent Light 2 Pulse
Bulletin 854K 60 Mm Control Tower Stack Lights
Bulletin 854K 60 Mm Control Tower Stack Lights UL Type 4/4X/13, IP66 "No tools" lens assembly Surface, vertical, M20 threaded tube, quick release base, 1/2 in. NPT, double-sided base, M12 (5-pin DC) micro
Bulletin 855E 50 mm Control Tower Stack Lights
Bulletin 855E 50 mm Control Tower Stack Lights Light Modules Sound Modules Flashing Incandescent 855E 10 FN 4 Voltage Light Module Type Lens Color 00 0 250V AC/DC (no lamp module) (1) XN Steady no lamp
INDICATOR LIGHTS SECTION R INDICATOR LIGHTS. Rectangular Indicator Lights. Round AC LED Indicator Lights. Large Format Indicator Lights
SECTION R Rectangular Indicator Lights Round Indicator Lights Large Format Indicator Lights Round DC LED Indicator Lights Round AC LED Indicator Lights Flashing Series LED Lights R3 R4 - R6 R7 R8 - R10
COMPACT30 Warning Tower Lights - General Description...J17 Complete Assemblies...J19 Accessories...J20 Technical Information...J21
SIGNAL50 - General...2 Light Modules...4 Bulbs...5 Sound Modules...6 Mounting Bases...7 Accessories...9 Complete Assemblies...10 Technical Information...12 COMPACT30 - General...17 Complete Assemblies...19
LUMOTAST FK. General data. Content. Pushbuttons 1-9
General data TAST illuminated pushbutton range Illuminable pushbuttons and signal lamps with lamp socket T /T / 4. Please order lamps / LEDs separately. Mounting hole diameter 6.2 mm 42 V/00 ma max. Water-jet
Pushbutton and selector switch series Quality touch!
Pushbutton and selector switch series Quality touch! For Info: sales@switchesunlimited.com www.switchesunlimited.com Phone: 00-1-07 Fax: 71-7-70 Pushbuttons and selector switches Ømm Quality touch! mm
Series Panel Mounted Control Devices
E_Master2012.qxd:NEW_E_Master_temp.qxd 1/27/12 4:28 PM Page 1 Series Features: Suitable for hazardous and corrosive locations. Installation is easy and precise. Devices fit into a standard 30.5mm, 1.2"
PUSHBUTTONS. Easy Selection Guide CONTROL DEVICES. nhp-nz.com
PUSHBUTTONS Easy Selection Guide CONTROL DEVICES nhp-nz.com s Lens Legend Plates (optional) Contact Blocks & Coupling Plates (Plastic or Metal) Accessories & Enclosures page 3-4 page 5 page 6-7 page 8
74 PS range Push-buttons, selectors and indicators Ø 22mm
74 PS range Push-buttons, selectors and indicators Ø 22mm Push-buttons, selectors, indicators and 22mm diameter pre-drilled technopolymer enclosures. Ideal for the creation of signalling and control units
Control Tower Stack Lights
Selection Guide Control Tower Stack Lights Bulletin Numbers 854J, 854K Control Tower Stack Lights What s Inside Topic Page Bulletin 854J - 40 mm Control Tower Stack Lights Product Overview 3 Product Selection
Push Buttons. Discount Schedule JC33. Legend Plates OFF. Standard Legend Plates - Available with markings listed below at $3.60 list each.
Push Buttons 100T Legend Plates Standard Legend Plates - Available with markings listed below at $3.60 list each. Non-Standard Legend Plates - Can be provided with special markings at $15.60 list each.
Modlight30/50/70 Signal Towers
Modlight30/50/70 Signal Towers ÔModular Ô ÔÔAdjustable ÔÔReliable 2 3 MODLIGHT MAXIMUM FLEXIBILITY AND OPTIMUM LIGHT YIELD Maximum flexibility to select and combine any color this is the outstanding feature
LUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, ring nut fixing LUMOTAST 25 keylock switch 1-30 LUMOTAST 25 keylock switch 1-31
TAST General data TAST pushbutton range Illuminable pushbuttons and signal lamps. Please order lamps/leds separately. Mounting hole diameter: 6.2 mm 42 V/00 ma max. Water-jet proof IP65 Low profile Lamp
Switches and Indicators.
E1 Switches and Indicators Switches and Indicators Series Description Product Assembly Product Range - pushbutton for standard mounting - accessories / spare parts Technical Data Technical Drawing /Dimension
SL7CB100 Stacklight Led Flashing, Yellow, 120V, 70MM
3804 South Street 75964-763, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 SL7CB100 Stacklight Led Flashing, Yellow, 10V, 70MM Eaton Corp Catalog Number Manufacturer Description Weight per unit
Oiltight Switches & Pilot Devices
LED and Incandescent ilot Lights (Sub-Assembled) Removable Terminal* + Operator + Lamp + Lens = Completed Unit * Removable terminals are applicable for CB terminated types only. art Numbers: ilot Light
Switches and Indicators 84
Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories
3SU11 complete units 5
5 5.1 Product description The 3SU11 complete units are a modular range of devices for front plate mounting and rear cable connection. Complete units made up of an actuating or signaling element and contact
LED-Signal Tower modulcompact70
LED-Signal Tower modulcompact70 S I G N A L G E R Ä T E optional model modulcompact70 As an option to the standard version (single modules are assembled) in projects with higher quantities with same configuration
Oiltight Switches & Pilot Devices
ø22mm - LW Series Oiltight LED and Incandescent Illuminated ushbuttons (Assembled) art Numbers: LW1L/LW2L Illuminated ushbuttons (LED and Incandescent) art Number Contact Style Contact Momentary Maintained
The complete Signal Tower Solution
ClearSIGN compact The complete Signal Tower Solution The new ClearSIGN signal tower combines a slim unobtrusive design with cutting edge lighting technology and great functionality. Signalling technology
Quality touch! Pushbuttons and selector switches. series
Quality touch! Pushbuttons and selector switches series Pushbuttons and selector switches Ø22mm Quality touch! QUICK AND EASY ACTUATOR INSTALLATION Click! Click! - Actuator fixing on the mounting surface,
FCC17 Series FILTERED STACKED D-SUB CONNECTORS
FCC17 Series FILTERED STACKED D-SUB CONNECTORS Ordering Information Stacked D-Sub FCC17 2 BP BS 4 5 5 X FCC17 2 VERTICAL MOUNTING DIMENSION BETWEEN CONNECTORS 1 =.625" [15.88 mm] 2 =.750" [19.05 mm] BP
22mm Non Illuminated Metal Operators
22mm 22mm Non Illuminated Metal Operators Altech Corp. can provide other push button and actuator options. If your requirement calls for a 22 mm operator which is not shown, please do not hesitate to call.
05/029. RMQ Titan Standard Legend Plates, Insert Plates Go to: List
RMQ Titan Standard Legend Plates, Insert Plates 05/029 Standard legend plates 30 x 50 mm, round, Type 0 I M22S-ST-X88 216485 0 I M22S-ST-X89 218147 I 0 II M22S-ST-X93 216486 STOP M22S-ST-GB0 216494 START
Monolithic tower lights. Complete, pre-wired tower lights Steady light Steady / Flashing light (1)
XVC Monolithic tower lights Ø 40, Ø 60, Ø 100 mm, complete, pre-wired tower lights Ø 40 mm / Up to IP54 Complete, pre-wired tower lights Steady light Steady / Flashing light (1) Light source (included)
Switches & Pilot Devices
Key features: 21/64 (8mm) round mounting hole Compact Design Saves Space Bright and Vivid Illumination Choice of Shapes and Functions old Clad Silver Contacts for reliable low level switching Snap action
Switches 6/1. 6/4 Introduction. 6/5 5TE8 control switches. 6/7 5TE4 8 pushbuttons. 6/9 5TE8 On/Off switches. 6/11 5TE1 switch disconnectors
6/4 Introduction 6/5 5TE8 control switches 6/7 5TE4 8 pushbuttons 6/9 5TE8 On/Off switches 4 6/11 5TE1 switch disconnectors 6 6/1 Switch to manual? Wherever electrical systems need to be switched on or
INCANDESCENT CLEARANCE/ MARKER LAMP
INCANDESCENT CLEARANCE/ MARKER LAMP FMVSS: P2 P3 A 4 x 2 1 wire or Reflective lens ABS base L04-0059A L04-0059R L04-0059R L04-0059A L04-0059A-BLK Black Base L04-0059R-BLK Black Base L04-0059C (not shown)
22mm Non Illuminated Metal Operators
22mm 22mm Non Illuminated Metal Operators Altech Corp. can provide other push button and actuator options. If your requirement calls for a 22 mm operator which is not shown, please do not hesitate to call.
Waterproof Exit Button x40x30/44mm - IP68, 304 Stainless Steel - Voltage: DC12V, DC9-24V (-W402N)
Touch & No Touch Exit Buttons s Infra-Red No Touch Exit Buttons ADB-11-CO (No Touch)/ ADB-13-CO (Hand icon) - 86x86x39mm - Sensing distance: 0.1-15cm - Installation: use with 86*86 back box ADB-12-CO (No
Indicator, round, raised, full face with plastic matt chrome bezel, 22.5 mm mounting, lamp block included. Yellow Green
22.5 mm 3.5 mm IP65 1 A 66 VAC Choose one component from each of the coloured sections to assemble a complete switch. For other options or further information please contact your local sales office. INDICATOR
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers Miniature Hydraulic/Magnetic Circuit Breaker M-Series M-Series PDF elibrary The M-Series miniature hydraulic/magnetic circuit breakers
EAO Your Expert Partner for Human Machine Interfaces. EAO Product Information. Series 19
EAO Your Expert Partner for Human Machine Interfaces EAO Product Information Series Switches and Indicators Contents Description... 3 Product Assembly... 4 Devices raised mounting... 5 Accessories...
2nd digit: Increased temperature resistance for soldering
RAFI GmbH & Co. KG Legend: RAFI RoHS Codes 20 Apr 2010 Meaning of Description of RoHS status 1st digit: RoHS compliance of individual material 2nd digit: Increased temperature resistance for soldering
1.4. Pushbuttons and Indicating Lights. Product Overview
Contents Product Overview Product Description The RMQ-6 pushbutton line offers a wide array of functional and attractively designed illuminated and non-illuminated pushbuttons, selector switches, emergency
8 mm series. General data. Content. Pushbuttons 1-3
General data Illuminable pushbuttons and signal lamps with lamp socket for a mounting hole diameter of 8. mm; 42 V, 250 ma Please order lamps/leds separately. Content series, illuminated pushbutton, 42
TABLE OF CONTENTS. Dialight Corporation 1501 Route 34 South Farmingdale, NJ TEL: FAX:
TABLE OF CONTENTS Page 2 LED Panel Mount Indicators Incorporating the latest in LED technology, these indicators are designed for commercial and industrial applications, either in or outdoors, some with
Automation Products. Pilot devices The complete range
Automation Products Pilot devices The complete range Pilot devices Contents Presentation of the complete range 2 The whole range 4 Modular range, 22 mm General description 7 Pushbuttons, type MP, MPD 10
Catalog February Control and Signaling Indicating Banks XVP 50mm
Catalog February 2004 Control and Signaling Indicating Banks XVP 50mm 2 Schneider Electric 0 General Beacons and indicator banks 0 Ø 50 mm indicator banks, type XVP XVP indicator banks are visual or audible
XVUC21B base unit module 24V AC/DC - black
Characteristics base unit module 24V AC/DC - black Product availability : Stock - Normally stocked in distribution facility Price* : 26.00 USD Main Range of product Product or component type Beacon or
8 mm Series. General data. Content
General data Illuminable pushbuttons and signal lamps with lamp socket for a mounting hole diameter of 8. mm; 42 V, 250 ma Please order lamps/leds separately. Content Series, illuminated pushbutton, 42
CM-500 SK 500 USER CODES KEYPAD
CM-500 SK 500 USER CODES KEYPAD Wiring diagram PCB front view ST2 1 3 1 3 N/C contact RL1 (magnet) N/O contact RL1 (strike) ST1 3 2 1 ST2 1 3 RL2 RL1 Strike 2 1 E M B 3 5 T C O 12 V V1 PB2 PB1 Input voltage
Series 28 Universal Sensors
Series 8 Universal Sensors Diffuse Mode with Background Suppression See pages 548-553 Features: Sharp sensing range cut-off Choice of infrared, visible red and laser light sources Sensing Range: 400 mm,
Pushbutton Switches, 16mm, Illuminated
Pushbutton Switches, 16mm, lluminated lluminated Pushbuttons are instrument-grade switches having snap-acting double break contacts, silver clad and gold plated to satisfy the requirements of logic level
XB7EV07BP round pilot light Ø 22 - clear - integral LED - 24 V - screw clamp terminals
Characteristics round pilot light Ø 22 - clear - integral LED - 24 V - screw clamp terminals Complementary Height Width Depth Terminals description ISO n 1 Product weight Main Range of product Product
industrial panel lamps
features specifications Typical characteristics (Ta = C) Ø8.1mm mounting Robust bright nickel plated brass housing Low profile styling, sunlight readable LEDs Sealed to IP67 Internal reverse protection
C5 Series Stainless Steel Photoelectric
C5 Series Stainless Steel Photoelectric Part Number Sensing Range M5 (5 mm) stainless steel - DC 14 models available Diffuse and through-beam styles Long operating distances Compact stainless steel housing
ETISIG - control buttons and signaling lamps manufactured by ETI Polam
ETISIG - control buttons and signaling lamps manufactured by ETI Polam Control buttons and signaling lamps are used in control- circuits to first-hand and remote controlling and supervising connecting
signaling solutions from auer signal
ECOmodul Tower Lights signaling solutions from auer signal Five Types of Interchangeable Simple Twist & Heavy Duty Illumination Components Release Modules Construction Modular signal tower series ECOmodul40,
LED Indicators. MultiLED display Indicators
MultiLED display Indicators 50 Technical features Body material: Polycarbonate V0/UL 9 - Colour: Black degree: /0 ML IP0 /0 MLH IP65 /8 ML IP5 Not replaceable LEDs Working temperature: -0 C +60 C Operating
SLC30 Series Panel Mounted Annunciators. SLC Series Panel Mounted Annunciators an Ideal Alternative to Mounting Multiple Pilot Devices
Series: 1.18" Series Panel Mounted Annunciators Switches & Pilot ights SC Series Panel Mounted Annunciators an Ideal Alternative to Mounting Multiple Pilot Devices Cluster mounting simplifies panel cutouts
Signalling solutions Harmony XVC/R/S
Harmony XVC/R/S Catalogue November 2009 Guaranteed distanceview information for more productivity With the new preassembled and precabled Harmony XVC, XVR and XVS ranges, Schneider Electric offers you
DOUBLE AND TRIPLE TOUCH ACTUATORS Ø22mm Double touch with or without indicator Triple touch.
Page -4 to and 11-28 to and 33 BUTTON ACTUATORS Ø22mm Spring return flush, extended and shrouded Push-push flush and extended Mushroom-head Mechanical reset Illuminated. DOUBLE AND TRIPLE TOUCH ACTUATORS
TP2 TP2. Popular products. Modular Push Button. 20 TH-Contact Products
Panel cut-out (mm) 16.2 or 22.5 Characteristics momentary or latching sealed IP40, IP65 or IP67 wide range of bezels with or without illumination NO, NC, CO gold plated single or double pole contact blocks
ST45L/ ST56L/ ST80L series
ST/ ST6/ ST80 series ED /ing Tower ights Universal ED tower light with a wide selection of audio and visual signaling options according to the application environment and intended use Different sizes of
Enhancing Business Performance
www.craftech.co.in 1 Crafting technology for your business needs About Craftech Who We Are Craftech is a young company based in Nashik, 160 Km from Mumbai the financial capital of India. We manufacture
Quick Start. i16 w16 i8 w8 i6 i4 w4 i2 w2. 25W max. 42W max. Input 24V AC/DC 12/24V AC/DC 12/24V AC/DC 12/24V AC/DC
Quick Start Safety Information: White Light and IR Variants (850nm & 940nm) Caution Risk Group 2. Avoid Exposure / use protection. See Safety Information in FULL Instruction Guide for details. Box Contents:
Versatile modular Signal Tower featuring easy assembly and wiring designed for every need. How to Order LU7-E-R
Signal Tower LED Alarm Sounds (FB Type) 0dB at m (FB Type) IP Φ0 NPN/PNP Open-collector Versatile modular Signal Tower featuring easy assembly and wiring designed for every need. FEATURES PATLITE s exclusive
Photoelectric Sensors E3F2
Photoelectric Sensors E3F2 Threaded Cylindrical Photoelectric Sensors with Built-in Amplifier for Use as an Optical Proximity Switch M18 DIN-sized cylindrical housing Housing materials: plastic, nickel
Wash Light User Data. User Data - Specifications Date: 01/11/2016 Page 1/7. RGBW (White 4000k) Single Colour (R,G,B,A,W)
Wash Light User Data RGBW (White 4000k) Tuneable White (592nm - 6500k) Single Colour (R,G,B,A,W) RGBA (Amber 592nm) 4 Channel 4 Channel 1 Channel 4 Channel 3,360lm at source 5,352lm at source - 2,724lm
Slim Relay G2RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. Relay and Socket Combinations
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Transparent housing enables checking relay
Kompakt 36 Page 59 NEW NEW. KombiSIGN 71 Page 32. KombiSIGN 50 Page 49 KombiSIGN 70 Page 38
Kompakt 36 Page 59 KombiSIGN 71 Page 32 KombiSIGN 50 Page 49 KombiSIGN 70 Page 38 Summary Signal Towers Kompakt 71 Page 62 KombiSIGN KombiSIGN 71 KombiSIGN 70 KombiSIGN 50 Permanent light 641 840 846 Page
KFA-37HD8. Relay-type Annunciators with LED Lights. Features 6-36 KFA-37HD8
KA-37HD8 Relay-type Annunciators with ED ights KA-37HD8 eatures Improved wiring efficiency because wiring between relay units and the indicator are unnecessary. Equipped with the output for either bell
22.5 Mm IEC. Product Selection. Emergency Stop Operators. Key Release Mushroom Operator. Non-Illuminated Twist-to-Release, Push-Pull
22.5 Mm IEC Product Selection Emergency Stop Operators Non-Illuminated Twist-to-Release, Push-Pull 60 mm Non-Illuminated Twist-to-Release 800FP-MT64 40 mm Non-Illuminated Push-Pull 800FP-MP44 Color Size
4XDOLW\ &RPPLWPHQW.
www.tier1automation.com Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced
Schaedler Yesco Industrial Control Product Update
Schaedler Yesco Industrial Control Product Update Review of new product lines and additions to existing product offerings offered by Allen-Bradley Industrial Control Components. ***LOW COST*** 1606-XLP15E
Light Pipe Selector Guide. Optopipe Lightpipes
Light Pipe Selector Guide Optopipe Lightpipes 40 Years of LED Experience Why Light Pipes? Visual status indication provides for safe and reliable operation of electrical equipment, instruments, and electronic
SLC40 Series Panel Mounted Annunciators
Series 1.57" Series Panel Mounted Annunciators SC 40 Series Annunciators SC series panel mounted annunciators are an ideal alternative to mounting multiple pilot devices. Cluster mounting simplifi es panel
T-1 3/4 Sub-Miniature LED Replacement Lamp
T1 3/4 SubMiniature LED Replacement Lamp Direct incandescent replacement LED lamp that delivers improved illumination, durability and long life. The T1 3/4 SubMiniature LED lamps are drop in replacements
MV Series AC Powered Photoelectric Sensors
MV Series AC Powered Photoelectric M18 (18 mm) plastic- AC 12 models available Diffuse, polarized reflective, and through-beam models Plastic housing Axial cable or M12 quick-disconnect models Operates
Conductive Sensors 2 to 4-point level controller Type CL with teach-in
Conductive Sensors to 4-point level controller Type CL with teach-in Conductive level controller Teach-in of sensitivity operating resistance from 0Ω to 0KΩ Multiple combinations of filling and emptying
FE Series Photoelectric Sensors
FE Series Photoelectric Mini-rectangular plastic - DC 2 models available Diffuse, polarized reflective, and through-beam models Plastic housing Axial cable or M8 quick-disconnect models NPN or PNP, Light-on/Dark-on
CONTROL & SIGNALLING DEVICES Ø 22.5 PLASTIC CONSTRUCTION ECONOMY 103P SERIES PUSH BUTTON SWITCHES AND PILOT LIGHTS
R CONTROL & SIGNALLING DEVICES Ø 22.5 PLASTIC CONSTRUCTION ECONOMY 103P SERIES PUSH BUTTON SWITCHES AND PILOT LIGHTS R Control and Signalling Devices Ø 22.5 "PLASTIC CONSTRUCTION ECONOMY" type 103 P Series
Pay us a virtual visit. Tube Ø 25 mm, all anodized
Audible element 844 Permanent light 840 Flashing light 842 LED permanent light 843 LED blinking light 843 LED rotating light 843 EVS LED element 843 (max. 5 signal elements can be combined) Pay us a virtual
Classification Enclosure rating Input voltage Type of
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Special input type with gold plated contacts.
Pile Driver Weld Immune Sensors
DC... 190 8, 12, 18, and 30 mm Diameter... 190 3- and 4-Wire DC... 192 8, 12, 18, and 30 mm Diameter... 192 AC/DC... 194 12, 18, and 30 mm Diameter... 194 Pile Driver Sensors P+F s weld immune Pile Driver
Key features: M8 Series BUCCANEER. Full Contact Diagrams Page 130
UCCNEER ulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory
COMPALARM AP. INSTRUCTION MANUAL IM620-U v0.41. Alarm Annunciator. General. Particulars. COMPALARM AP Instruction Manual IM620-U v0.
INSTRUCTION MANUAL IM620-U v0.4 COMPALARM AP Alarm Annunciator General The COMPALARM AP is a 2 point alarm system, with as many normally open or normally closed input contacts. It gives the possibility
Advantages of a Full Featured 700 Series Relay
SECTION 1 Advantages of a Full Featured 700 Series Relay Since the launch of the 700 series relays in 2000, this product line has continuously evolved both functionally and visually. The 700 series product
Pushbutton Units and Indicator Lights
SIGNUM 3S3 Introduction Overview SIGNUM is a range of plastic and metal control devices for frontplate mounting and rear wire connection. SIGNUM is of modern industrial design with a very construction
User Manual. PCKeypad Wireless Keypad
User Manual PCKeypad Wireless Keypad Description The PCKeypad is a wireless keypad with a PentaCODE transmitter built-in. It works with all of Elsema s PCR series receivers. The installer has the option
Program B3 318 Ø 22,5mm. Push Buttons 319 EMERGENCY STOP Buttons 320 Key Operated Rotary Switches 320
Push Buttons Index Page Program B3 318 Ø 22,5mm Push Buttons 319 EMERGENCY STOP Buttons 320 Key Operated Rotary Switches 320 Rotary Knobs and Swing Knobs 321 Illuminated Rotary Knobs and Swing Knobs 321
Conductive Sensors 2 to 4-point level controller Type CL with teach-in
Conductive Sensors to -point level controller Type CL with teach-in Conductive level controller Teach-in of sensitivity operating resistance from 0Ω to 0KΩ Multiple combinations of filling and emptying
I N D I C AT O R L I G H T S
INDICATOR LIGHT Indicator Lights 7 64 3 7 64 33 7 4 66 4 7 7 66 43 7 8 68 Accessories 7 64 INDICATOR LIGHT INDICATOR LIGHT on demand fluorescent lamp, with or without anti-luminescence resistor Incandescent
pointofsale available at your local trade outlet
pointofsale available at your local trade outlet pointofsale products IP65 pushbuttons Ø22.5mm Contact rating @ 240V AC 10A Resistive (AC1), 6A (AC15) PB01C PB02C PB03C PB04C PB05C PB06C PB07C PB08C PB09C
Q8 series. Ø8 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING LED INDICATORS
IND-Q8-1710 LED INDICATORS DISTINCTIVE FEATURES 5mm colored diffused epoxy lens or 5mm water clear super bright LEDs Prominent, recessed and flush bezel styles (2.8 x 0.8) solder lug/faston terminals,
Safety is a SIRIUS business
Safety is a SIRIUS business Partner Conference Stay Connected Unrestricted Siemens AG 2014. All rights reserved. The Safety Integrated principle Objective: Protection of personnel, machinery and the environment.
MODULAR SWITCH SYSTEM
Appendix A-1 Appendix A MODULAR SWITCH SYSTEM Items Shown: A - Flush Mount Switch B - Connector Plug C - Indicator Light D - Indicator Bezel Insert E - Blank Plug F - 4-Gang Switch Bezel The Euramtec Modular
LED INDICATORS ELECTRICAL SPECIFICATIONS STANDARD LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Recessed Flush Forward Voltage HE Red 80 mc
IND-Q8-1710 DISTINCTIVE FEATURES 5mm colored diffused epoxy lens or 5mm water clear super bright LEDs Prominent, recessed and flush bezel styles (2.8 x 0.8) solder lug/faston terminals, pins or (200mm
1/6 TWO-FAMILY FLUSH/SURFACE-MOUNTED 5-WIRE AUDIO STYLEKIT AUDIO KIT 2 WIRES VIDEO DOOR ENTRY SYSTEMS & KITS OVERVIEW
1/6 OVERVIEW Style Kit 5 is the ideal door entry phone kit which uses 5 wires and is available in the single-family and two-family version. Style Kit 5 has an original and innovative design characterised
SWITCHES 2013/2014 A WORLD OF SWITCHING CAPABILITIES
SWITCHES 2013/2014 PANEL MOUNTED SWITCHES PCB MOUNTED SWITCHES A WORLD OF SWITCHING CAPABILITIES New products IC series Short case For harsh environments Momentary Square or round actuator Page B1-2 IL
PUSHBUTTONS. Easy Selection Guide CONTROL DEVICES. nhp-nz.com
PUSHBUTTONS Easy Selection Guide CONTROL DEVICES nhp-nz.com Operators Lens Legend Plates (optional) Contact Blocks & Coupling Plates (Plastic or Metal) Accessories & Enclosures Refer to page 3-4 Refer
Control & Automation Products
Control & Automation Products Whether it is inside your panel... LED Machine Lighting Barriers HMIs Programmable Logic Controllers Power Supplies HMI + PLC Emergency Stops Relays Terminal Blocks Timers
E3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection method Sensing