MV Series AC Powered Photoelectric Sensors

Transcription

1 MV Series AC Powered Photoelectric M18 (18 mm) plastic- AC 12 models available Diffuse, polarized reflective, and through-beam models Plastic housing Axial cable or M12 quick-disconnect models Operates on 20 to 253 VAC IP67 rated Wiring diagrams M12 Connectors MV Series Photoelectric Selection Chart Part Number Price Sensing Range Output State Connection Dimensions Characteristic Curves Diffuse MV2-A0-0A <---> 100mm (3.9 in.) MV2-A0-0E <---> M12 (12mm) connector Figure 2 Chart 1 MV4-A0-0A <---> 200mm (7.9 in.) N.O. MV4-A0-0E <---> M12 (12mm) connector Figure 2 Chart 2 MV6-A0-0A <---> 400mm (15.7 in.) MV6-A0-0E <---> M12 (12mm) connector Figure 2 Chart 3 Polarized reflective* MVP-A0-0A <---> 3m (9.8 ft) N.O MVP-A0-0E <---> M12 (12mm) connector Figure 2 Chart 4 Through-beam** MVE-00-0A Emitter <---> Receiver dependent Chart 5 MVE-00-0E Emitter <---> M12 (12mm) connector Figure 2 16m (52.5 ft) MVR-A0-0A Receiver <---> N.O. Chart 5 MVR-A0-0E Receiver <---> N.O. M12 (12mm) connector Figure 2 *Receivers include one round (84mm dia.) reflector. Purchase additional reflectors separately. **Purchase one receiver and one emitter for a complete set. Cables and Accessories Cables and accessories can be found starting on page Dimensions (mm) Figure 1 Figure

2 MV Series AC Powered Photoelectric Specifications Diffuse Models Reflective Models Through-Beam Models Type Diffuse reflection Polarized reflective 4 Through-beam 5 MV2 models: 100mm 1 Sensing Distance MV4 models: 200mm 1 3 3m 16m MV6 models: 400mm 2 Minimal Detectable Objects mm Emission Infrared (880nm ) Red (660nm) Infrared (880nm) Tolerance +15/ -5% Sn N/A Differential Travel 10% Repeat Accuracy 5% Operating Voltage VAC, 50/60Hz No-load Supply Current 30mA (rms) Emitter: 30mA (rms) Receiver: 15mA (rms) Load Current 5-300mA (rms) (Ta=50 C) Leakage Current 1.5mA (rms) max. at 250VAC Voltage Drop 3V max. I L=300mA Output Type TRIAC Switching Frequency 25Hz (tv) Time Delay Before Availability 200 ms Input Voltage Transients Protection Yes, as long as the transient peak does not exceed 253VAC Input Power Polarity Reversal Protection Yes Output Power Short-Circuit Protection Yes Temperature Range -25 to +70 C (-13 to +158 F) Temperature Drift 10% Sr Interference to External Light 3000 lux (incandescent lamp), lux (sunlight) Protection Degree (DIN 40050) LED Indicators red (output energized) Housing Material PBT (plastic housing), polycarbonate (cable exit) Lens Material Plexiglas 7N Weight g g 1 With 100x100mm white matte paper 2 With 200x200mm white matte paper 3 With standard Ø84mm RL110 reflector 4 Each sensor includes one 84mm round reflector (RL110). Purchase additional reflectors separately. 5 An emitter (SSE) and receiver (SSR) pair must be ordered for a complete sensor set. Overview DL05/06 DL105 DL205 DL305 DL405 Field I/O Software C-more HMIs Other HMI AC Drives Motors Steppers/ Servos Motor Controls Proximity Photo Limit Switches Encoders Current Pushbuttons/ Lights Process Relays/ Timers Comm. TB s & Wiring Power Warning: These products are not safety sensors and are not suitable for use in personal safety applications. Circuit Protection Enclosures Appendix Part Index

3 MV Series AC Powered Photoelectric Characteristic curves Chart 1 Chart 2 Chart 3 Chart 4 Chart

4 Photoelectric Accessories: Cables Cables with quick-disconnect plugs Industry standard axial and right-angle M8/M12 screw-lock connectors. The cables listed below can be used with extension cables 2m, 5m, and 7m cable lengths PVC (polyvinyl chloride) jacket for typical industrial applications PUR (polyurethane) jacket for oily and direct sunlight applications IP67 rated Dimensions Figure 1 Figure 2 M8 Quick-Disconnect Cables Part Number Price Length Poles Connector Jacket Dimensions M8 Quick-Disconnects CD08-0A-020-A1 <---> 2m (6.5ft.) 3 Axial PVC Figure 1 CD08-0A-020-C1 <---> 2m (6.5ft.) 3 Right-angle PVC Figure 2 CD08-0A-050-A1 <---> 5m (16.4ft.) 3 Axial PVC Figure 3 CD08-0C-050-A1 <---> 5m (16.4ft.) 3 Axial PUR Figure 3 CD08-0A-050-C1 <---> 5m (16.4ft.) 3 Right-angle PVC Figure 4 CD08-0C-050-C1 <---> 5m (16.4ft.) 3 Right-angle PUR Figure 4 CD08-0A-070-A1 <---> 7m (23ft.) 3 Axial PVC Figure 1 CD08-0A-070-C1 <---> 7m (23ft.) 3 Right-angle PVC Figure 2 Figure 3 Figure 4 M12 Quick-Disconnect Cables Part Number Price Length Poles Connector Jacket Dimensions M12 Quick-Disconnects CD12L-0B-020-A0 <---> 2m (6.5ft.) 4 Axial PVC Figure 5 CD12L-0B-020-C0 <---> 2m (6.5ft.) 4 Right-angle PVC Figure 6 CD12M-0B-050-A1* <---> 5m (16.4ft.) 3 Axial PVC Figure 7 CD12M-0D-050-A1* <---> 5m (16.4ft.) 3 Axial PUR Figure 7 CD12M-0B-050-C1* <---> 5m (16.4ft.) 3 Right-angle PVC Figure 8 CD12M-0D-050-C1* <---> 5m (16.4ft.) 3 Right-angle PUR Figure 8 CD12M-0B-070-A1 <---> 7m (23ft.) 4 Axial PVC Figure 5 CD12M-0B-070-C1 <---> 7m (23f.t) 4 Right-angle PVC Figure 6 * Note: Do not use with: DM, FA, QX, SS, SSF, MS and MSF series photoelectric sensors. These sensors require 4-pole cables. Figure 5 Figure 6 Cable Specifications M8 M12 Length 5m (16.4ft.) 2m (6.5ft.)/ 7m (23ft.) 2m (6.5ft.)/ 7m (23ft.) 5m (16.4ft.) Nominal Voltage 50VAC/75VDC 60VAC/75VDC 300VAC 60VAC/75VDC Nominal Current 4A 1.5A 4A 1.5A Protection Degree Contact Body Material ABS PUR ABS PUR Housing Material PUR PUR Contacts Material CuSn CuZn CuSn CuZn Conductors Section 0.34mm mm 2 Ø Outer Cable 5mm 5mm Temperature Range -25 to +70 C (-13 to 158 F) -25 to +70 C (-13 to 158 F) Figure 7 Figure

5 Photoelectric Accessories: Extension Cables Extension cables with quick-disconnect plugs on each end Available extension cables include: Industry standard M8 and M12 screw-lock connectors Axial and right-angle connector models 1m and 3m cable lengths PVC (polyvinyl chloride) jacket for typical industrial applications IP67 rated Dimensions Figure 1 M8x1 M8x Overview DL05/06 DL105 DL205 DL305 DL405 Field I/O Software Figure 2 C-more HMIs M8 Extension Cables with Quick-Disconnect on each end Part Number Price Length Poles Connectors Jacket Dimensions M8 Quick-Disconnect Extension Cables Other HMI AC Drives CDP08-0A-010-AA <---> 1m (3.28ft.) 3 2 Axial PVC Figure 1 CDP08-0A-010-BB <---> 1m (3.28ft.) 3 2 Right-angle PVC Figure 2 CDP08-0A-030-AA <---> 3m (9.84ft.) 3 2 Axial PVC Figure 1 CDP08-0A-030-BB <---> 3m (9.84ft.) 3 2 Right-angle PVC Figure 2 M8x1 24 Motors Steppers/ Servos M12 Extension Cables with Quick-Disconnect on each end Part Number Price Length Poles Connectors Jacket Dimensions M12 Quick-disconnect Extension Cables CDP12-0B-010-AA <---> 1m (3.28ft.) 4 2 Axial PVC Figure 3 CDP12-0B-010-BB <---> 1m (3.28ft.) 4 2 Right-angle PVC Figure 4 CDP12-0B-030-AA <---> 3m (9.84ft.) 4 2 Axial PVC Figure 3 CDP12-0B-030-BB <---> 3m (9.84ft.) 4 2 Right-angle PVC Figure 4 Figure M8x1 Motor Controls Proximity Photo Limit Switches Encoders Cable Specifications Length Nominal Voltage Nominal Current Protection Degree Contact Body Material Housing Material Contacts Material M8 / M12 1m (3.28ft.)/ 3m (9.84ft.) 50VAC/75VDC 4A ABS PUR CuSn Conductors Section 0.34mm 2 Ø Outer Cable Temperature Range 5mm -25 to +70 C (-13 to 158 F) Figure 4 o15 o15 M12x1 M12x Current Pushbuttons/ Lights Process Relays/ Timers Comm. TB s & Wiring Power Circuit Protection Enclosures Appendix M12x1 o15 M12x1 o15 Part Index

6 Photoelectric Accessories: Cables Cables with quick-disconnect plugs for DFT/DFP Models Do not use extension cables with the cable listed below. The physical pin configurations do not match. Available cables include: Industry standard M8 screw-lock connectors Axial and right-angle connector models 2m, 5m and 10m cable lengths PVC (polyvinyl chloride) jacket for typical industrial applications IP68 rated M8 Cables with Quick-Disconnect Part Number Price Length Poles Connectors Jacket Dimensions M8 Quick-Disconnects CD08-0G-020-A1 <---> 2m (6.56ft.) 4 Axial PVC Figure 1 CD08-0W-020-C1 <---> 2m (6.56ft.) 4 Right-angle PVC Figure 2 CD08-0G-050-A1 <---> 5m (16.4ft.) 4 Axial PVC Figure 1 CD08-0W-050-C1 <---> 5m (16.4ft.) 4 Right-angle PVC Figure 2 CD08-0G-100-A1 <---> 10m (32.8ft.) 4 Axial PVC Figure 1 CD08-0W-100-C1 <---> 10m (32.8ft.) 4 Right-angle PVC Figure 2 Cable Specifications Length Nominal Voltage Nominal Current Protection Degree Contact Body Material Housing Material Contacts Material M8 2m (6.56ft.) 5m (16.4ft.) 10m (32.8ft.) 30VAC/30VDC 4A ABS PUR CuSn Conductors Section 0.25mm 2 Ø Outer Cable Temperature Range 4.5mm -5 to +70 C (23 to 158 F) Dimensions (mm) Figure Figure 2 33 L Use these cables if the sensor pin configuration looks like the connector pin-out below. M8 Connector brown (1) white (2) blue (3) black (4) brown (1) white (2) blue (3) black (4) L

7 Accessories: Reflectors and Shutters RL series reflectors for polarized reflective photoelectric sensors (all models) Suitable for use with polarized light photoelectric sensors Shapes and sizes for most applications Miniature types for close mounting in multiple sensor installations Single hole, dual hole and stud mounting types available 10 reflectors per package Installation notes Keep the reflector surface clean to ensure peak detection performance. This is especially true when the maximum sensing range is being used. Clean using a damp cloth When selecting a reflector, it is important to consider the ambient conditions it will be exposed to. Dusty or high humidity conditions may reduce the sensing range as much as 90%. Reflectors should be positioned at a 90 angle to the optical axis with a tolerance of ±15. Dimensions mm mm 5.7 mm thickness Overview DL05/06 DL105 DL205 DL305 DL405 Field I/O Software C-more HMIs Other HMI AC Drives Motors Steppers/ Servos Motor Controls Proximity ST0S1 through ST0S8 shutters for M18 (18 mm) through-beam sensors (SSE / SSR) Specifications Model RL102 RL103 RL104 RL105 RL106G RL109 RL110 3 Price (10 per pack) <---> <---> <---> <---> <---> <---> <---> % Sensing Range Using SSP 1 50% 40% 50% 50% 50% 50% 100% % Sensing Range Using QXP % 60% 50% 45% 30% 100% Dimensions Ø26mm Ø36mm Ø47mm 90x40mm 182x42mm Ø83mm Ø84mm Degree of Protection 2 Mounting Materials Customer-supplied adhesive or other mounting method required Acrylic/polycarbonate 1 Refer to individual catalog pages for detailed explanations of these photoelectric sensors. 2 Not recommended for applications involving moist air environments or water immersion. 3 All reflective sensors are shipped with an RL110 reflector. Reduces the emitted beam, allowing the detection of small targets two Ø4.3mm holes two Ø6mm holes one M5 stud one Ø5mm hole Sensing Distance (when used with SSE / SSR Model Photoelectric switches) Model ST0S1 ST0S2 ST0S3 ST0S4 ST0S6 ST0S8 Pieces Per Pack Price <---> <---> <---> <---> <---> <---> Ø x shutter (mm) Distance (m) object (mm) Shutter consists of a threaded ring-nut, a protective lens, an O-ring and an aperture, which can screw onto the optical head of either the emitter or receiver. The table above shows the sensing distance and minimal detectable object. N/A N/A N/A N/A Photo Limit Switches Encoders Current Pushbuttons/ Lights Process Relays/ Timers Comm. TB s & Wiring Power Circuit Protection Enclosures Appendix Part Index

8 Accessories: Reflectors, Adapters & Mounting Brackets RL series reflectors for polarized reflective Laser photoelectric sensors (FALN series) Suitable for use with polarized light Laser photoelectric sensors Sizes for most applications Miniature types for close mounting in multiple sensor installations 5 reflectors per package Specifications Model RL201 RL203 RL204 Sensing Range Using FALN 1 30m 7m 7m Dimensions 60mm x 82mm 19mm x 60mm 20mm x 32mm Mounting two Ø4mm holes two Ø6mm holes two Ø3mm holes Degree of Protection 2 Materials Acrylic/polycarbonate 1 Refer to individual catalog pages for detailed explanations of these photoelectric sensors. 2 Not recommended for applications involving moist air environments or water immersion. Note: All reflective sensors are shipped with an RL110 reflector. Purchase additional reflectors separately. RL201 RL203 RL204 <---> <---> <---> (5 per pack) (5 per pack) (5 per pack) ST03 right-angle M18 (18 mm) beam adapter ST02 plastic swivel bracket M18 (18 mm) For use with M18 retroreflective and Plastic mounting bracket for use through-beam photoelectric switches (not for use with diffuse reflection sensors). Allows 90 light detection using an internal mirror set at 45 to the optical axis. Sensitivity loss is about 20-30%. with M18 photoelectric switches. Has a ball-joint and set screws to adjust sensor orientation. Allows orientation in all directions for retroreflective and through-beam <---> sensors. (Will not work with C18 series). <---> 18 68

9 Accessories: Mounting Brackets ST12A metal axial bracket For mounting M12 (12 mm) sensors. Has two mounting holes (use 3 mm screws) and allows the rotation of an optical axis for right-beam angle adapter sensors. ST18A metal axial bracket Metal mounting bracket for M18 (18mm) sensors. Has two mounting holes (use 4 mm screws) and allows the rotation of an optical axis for right-beam-angle-adapter sensors. <---> <---> (1 per pack) (1 per pack) Overview DL05/06 DL105 DL205 DL305 DL405 Field I/O Software C-more HMIs Other HMI AC Drives Motors slot for M4 screw fixing Steppers/ Servos Motor Controls ST12C metal right-angle bracket Metal angular mounting bracket for use with M12 (12 mm) sensors. Has two mounting holes (use 3 mm screws) and allows the rotation of an optical axis for axial sensors. <---> (1 per pack) ST18C metal right-angle bracket Metal angular mounting bracket for M18 (18 mm) sensors. Has two mounting holes (use 4 mm screws) and allows the rotation of an optical axis for axial sensors. <---> (1 per pack) Proximity Photo Limit Switches Encoders Current Pushbuttons/ Lights Process Relays/ Timers Comm. TB s & Wiring Power Circuit Protection slot for M4 screw fixing Enclosures Appendix Part Index