USER S GUIDE CONTENTS

Transcription

1 USER S GUIDE CONTENTS INTRODUCTION... 1 PACKAGE CONTENTS... 2 TECHNICAL FEATURES... 3 CENTRAL UNIT DESCRIPTION... 5 INSTALLATION... 8 CAUTION... 8 Mounting the central unit... 8 Hardware installation steps... 9 Sensor port pin out...11 CLIENT APPLICATIONS...12 Telmoss mobile...13 Running the application...13 Connection profiles...14 Making the call...14 Live images...17 Archive images...19 Parameters...22 Hanging up...26 Telmoss PC...27 Installing Telmoss PC application...27 Running the application...29 Profiles...30 On-line menu...33 Solving problems...38 No power indication...38 GSM signal LEDs flash...38 Connection fails...38 GM862-GPRS Conformity Assessment...39

2 INTRODUCTION PACKAGE CONTENTS Thank you for choosing this product. Please read carefully this manual to make the best use of the entire system. The system itself contains central hardware unit, Telmoss, which is actually GSM video transmitter. It works, completely automatically, on 2 frequency bands: 900 and 1800 MHz ensuring an excellent radio coverage. In first sections hardware installation will be presented. Please, pay attention specially to the articles related to the SIM card installation. Last sections describe client application and system s parameter setup. TelMoss box contains following items: TelMoss central unit (1) Power supply adapter 230V-AC / 12V-DC (2) Dual Band GSM antenna (3) CD ROM with client applications and user manual 3 1 NOTE In accordance with on-going improvements, the specifications, design and other descriptions in this manual are subjects to modifications without prior notice. 2 Figure 1 Telmoss user s guide 1/42 Telmoss user s guide 2/42

3 TECHNICAL FEATURES Basics used as a stand alone device or an upgrade to installed video surveillance system all parameter setup performed through client applications built in GSM modem connection for standard, external modem (RS232) CSD data transfer Dimensions H: 52 mm L: 196 mm W: 174 mm Mounting wall table OS supported Symbian Series 60 OS Windows XP Power supply external 12 V- DC, min. 500mA Connectivity 4x analog video in,bnc D-SUB 9-pin male RS-232 connector for external modem D-SUB 9-pin female connector for alarm inputs power supply SMA connector for external GSM antenna SIM card socket Video PAL, SECAM i NTSC video formats scan resolutions: 160x120, 320x240 i 640x480 pixels 5 predefined compression levels color and C/B mode digital zoom up to 4x date/time stamp image storing directly into client s device memory Telmoss user s guide 3/42 Telmoss user s guide 4/42

4 CENTRAL UNIT DESCRIPTION 5. 4 pin power supply connector (12 V - DC), 2 pins are used (+,-) 6. 4 BNC video inputs Here is the brief description of main Telmoss parts: 1. SMA connector for GSM antenna connection 2. SIM card (small format) Figure 2 Upper panel Figure 3 Down panel 6 Figure 4 Front panel 3. DB9 female connector for alarm inputs (see Installation) 4. DB9 male RS 232 connector for external modem connection Telmoss user s guide 5/42 Telmoss user s guide 6/42

5 7. power supply presence indicator (lights if power supply is ok, but only after boot sequence which takes ca.55 seconds after switching on) 8. GSM signal strength indicator (3 levels) 9. traffic/communication indicator (blinks if there is rx/tx traffic) 10. video signal indicator (light red if video signals are presented) INSTALLATION CAUTION Telmoss device should not be used in an explosive environment (petrol stations, refineries, fuel depots, chemical plants etc.) unless it is housed in an approved explosion protection enclosure. Telmoss device is to be positioned at least 20 cm from the human body during it's operation. Mounting the central unit Telmoss device must be installed at the proper position where GSM signal coverage is good enough. The unit can be mounted either on the wall or on the table. From the security reasons, like other video surveillance systems, the main unit should be hidden somewhere inside observed area in order not to be easily reachable nor visible. Once the final position for central unit is defined, all cables (power adapter cable, coaxial from cameras and wires from sensors) must reach appropriate connectors at the unit (see Figure 3). NOTE Camera and sensor mounting procedures are out of the scope of this manual. Telmoss user s guide 7/42 Telmoss user s guide 8/42

6 Hardware installation steps 1. MOUNTING THE ANTENNA Apply GSM antenna (Figure 1, pos 3) to the SMA connector (Figure 2, pos 1). Make sure that antenna is fasten enough (turning it few times to right till reach the end of the thread) in order to ensure good signal reception. 2. INSERTING THE SIM CARD Insert the SIM card into the slot as shown on Figure 2, position 2. NOTE: PIN request must be disabled on applied SIM card. For this purpose use standard GSM mobile phone and disable this function. For details refer to mobile phone user s guide. applied SIM card must have so called Data/fax subscription number activated. This number is dedicated for incoming data calls. For more information refer to your network operator. 3. PLUG-IN THE CABLES Plug-in coaxial cables (Figure 3, pos 6) from the cameras previously installed and connect the wires from sensors (see more details in chapter Sensor port ) 4. PLUG-IN POWER SUPLLY Plug-in the power supply cable to the connector shown on Figure 3, position 5 and power supply adapter to the mains socket (220V). 5. WATCH THE LED INDICATORS If the power supply is connected properly, the boot sequences starts and after ca. 22 seconds Red Power Supply LED indicator (Figure 4, pos 7) will start to flash. This will last ca seconds. In the mean time all 3 green GSM signal indicators (Figure 4 pos 8) will blink on/off few times, indicating the presence of GSM module. Approximately 55 seconds after switching on, Red Power Supply LED indicator stops flashing and must remain switched on permanently. Those Camera LEDs are turned on, whose connectors are supplied with proper video signal. About ten seconds afterwards, the unit should be properly connected to the network indicating the signal strength on 3 green LEDs. If those LEDs start to flash please wait for few seconds (10-20). If this continues, it indicates the permanent problem with the connection. So, the device is properly installed if: RED Power Supply LED indicator is switched on Telmoss user s guide 9/42 at least 1 GREEN GSM signal indicator is switched on at least 1 RED Camera indicator is switched on Now, if all listed steps are performed successfully, parameter set-up has to be done using one of the client applications. NOTE If SIM card has not been inserted before switching on Telmoss device, the system software will consider ONLY external devices connected to RS232 connector (Figure 3, pos 4) as the communication devices i.e. external modem, direct cable connection to PC etc. All three GSM signal LEDs will blink continuously. Communication will be possible only through this port and no notification SMS will be sent. Telmoss user s guide 10/42

7 Sensor port pin out Four dry, relay sensor inputs can be connected to Telmoss sensor port. Connector pin- -out is shown on the picture below. CLIENT APPLICATIONS The main purpose of client applications is the control over the system either in the sense of remote viewing or parameter set-up. There are two client applications: Telmoss mobile dedicated for the use on mobile phones running SymbianOS Series60. Telmoss PC dedicated for the use on personal computers running on Windows XP OS. Telmoss CD directory tree: D-sub 9 pins female connector (see Figure 3, poz.4) PIN 4 & 9 relay input 1 PIN 3 & 8 relay input 2 PIN 2 & 7 relay input 3 PIN 1 & 6 relay input 4 Telmoss mobile installation In each subfolder of Telmoss mobile directory there is a filetelmoss mobileeng.sis. Those are installation files (English versions) for Symbian OS which are dedicated for following mobile phones: v.2.0.0/nokia6_1 for Nokia7650, 3650,3660, NGage v.2.0.0/siemenssx1 for Siemens SX1 v.2.1.0/nokia7_0 for Nokia 6600, 7610 and newer NOTE For the details on application install procedure please refer to original mobile phone's manual. Telmoss user s guide 11/42 Telmoss user s guide 12/42

8 Telmoss mobile Running the application Once the application is installed, TelMoss mobile icon can be found in the main Program s folder (as shown on the picture below): Connection profiles Selecting Profiles user can modify, add or delete connection profiles. Each profile contains: profile name, telephone number and camera s titles. Figure 7 Phone number must be defined in order to make a call. It is highly recommended to enter number in format +CCCAAANNNN where Figure 5 (A) (B) After the application has been started, the screen shown on Figure 5 (B) appears: Exit: close the application and return to main menu, Options: shows the program options as follows: CCC is country code AAA is area code NNNN is phone number For example, to call phone number in Helsinki the sequence is Making the call In order to establish the connection with central Telmoss unit, for which the profile has been previously defined, Call menu item should be selected (Figure 6). Following screens appear: Figure 6 Telmoss user s guide 13/42 Telmoss user s guide 14/42

9 IMPORTANT: If incorrect PIN code is entered, user has 2 more tries to enter correct PIN. All PIN codes can be modified and changed in on-line menu. See chapters that follow. Once the PIN check is done properly, application enters to on-line menu. Note that all time spent in this state is charged by network provider until the connection is over. See important notes about connection status in Chapter Hanging up. Figure 8 (A) (B) After the profile has been selected, dialling procedure starts. This procedure could last between 20 and 30 seconds depending on actual network conditions. If there are problems in connection, appropriate message will be shown otherwise following dialog will appear: Figure 10 Options menu contains: Live images Archive images Parameters Hangup Figure 9 Now, the user is obliged to enter correct PIN code. There are 4 factory, predefined PIN codes as follows: USER USER USER USER Telmoss user s guide 15/42 Telmoss user s guide 16/42

10 Live images This function first, sends the request to Telmoss for the list of available (switched on) cameras. After few seconds the response should be presented in the following form: If user presses the soft key Stop, image transfer is stopped and in max. 5 seconds Options menu appears with following items: Figure 13 Figure 11 Each camera marked with green icon, can be selected. As soon as camera is selected the image transfer starts. Few seconds are needed to receive the image while transfer progress status is being drawn on the screen. When image is loaded completely it is shown and the transfer of next picture starts automatically. Continue: next image transfer starts, Zoom 2x & 4x: select the area, which you wish to magnify, by yellow rectangle and press OK. The transfer of new, subimage starts. Save image: the picture is saved in JPG format into the phone memory. In order to see image subsequently please use original, phone image viewer. Options: modifies image reception paramteres: o o o o Quality factor (1 min.quality, max.speed), Color image (yes:color image, no: B/W image), Date stamp (enables time/date stamp to be printed on image), Brightness (3 levels of image brightness) All those parameters will be applied on the next, received image. To stop the image reception and to return to the main, on-line menu press the Back soft key. Figure 12 NOTE If there are any communication problems, the appropriate message will pop up. However, good indication of communication status are yellow, transfer progress bars. If their state is frequently updated, the communication flow is satisfactory. Telmoss user s guide 17/42 Telmoss user s guide 18/42

11 Archive images When this function is selected, the transfer of archive list (log file) starts. Depending on the number of the records, this process can last up to few seconds. On the received list, the following table appears: Figure 16 Once the preview image is loaded following navigation key can be used for browsing the archive: joystick up/down one image back/forward Figure 14 Each stored image is determined by camera number, date and time. Following menu options are now available: joystick left/right 10% images out of total number back/forward joystick central button starts loading whole image Figure 15 Preview: loads only image preview (low quality, high speed), see Figure 16 Whole image: loads entire image (320x240 pixels) in the highest quality. Transfer takes ca seconds (see Figure 17) Archive status: gives the total number of archived images per each camera Clear archive: removes all images from the memory of central unit Figure 17 When whole image has been loaded only ¼ of entire area is drawn on the screen. Other parts can be seen moving the joystick key up/down/left/right. This picture can be saved to phone memory using Options/Save image function. Telmoss user s guide 19/42 Telmoss user s guide 20/42

12 NOTE Total archive capacity is 1000 images and it is organized in the form of FIFO buffer (the first image recorded will be first erased when the limit of 1000 images has been reached.). Parameters Use this function in order to set main system parameters as follows: Change PIN Set activity detection params Set SMS reception params Set Date/Time on central unit Changing the PIN There are 3 steps required to change the current user s PIN code (4 digit numeric sequence): enter old (current) PIN, enter new PIN, renter new PIN. If everything has been entered correctly, following message appears: Figure 18 NOTE If PIN is changed, new PIN must be applied during the next connection to the central unit. Activity detection In order to set up the parameters of activity detection following steps must be performed: 1. camera selection Each camera is logically related to particular sensor zone (camera 1 -> zone 1... camera 4 -> zone 4). First step is to select camera/zone for which parameters are to be set up. Telmoss user s guide 21/42 Telmoss user s guide 22/42

13 Setting SMS reception If user wants to receive SMS messages about alarms following parameters must be set up: SMS reception (yes/no) enables/disables SMS sending to particular user. User is determined by PIN code during the logging procedure. Destination number must be in the form +cccaaannnn (e.g. for Croatia, Vipnet network, number is ). This number defines the destination phone number to which the SMS will be sent. 2. parameters definition Figure 19 Archive images (yes/no) in the case of alarm defines if images are stored in the memory or not? Video detection (yes/no) if yes, alarm will be produces if there are enough changes between recorded images Sensitivity threshold (1-10) main parameter for video detection mechanism (1 max. sensitivity, 10 min.sensitivity) Sensor detection (yes/no) if yes, alarm will be produced if there is a sensor connected to Telmoss which generates the alarm signal. In the case that no sensor is connected to the input connector, alarm will be generated only once at the begining (always ON). An alarm can be generated in 3 cases: video detection, sensor detection or both (the first happens produces the alarm) depending on the settings. IMPORTANT NOTES In the case of alarm: images will be archived ONLY if Archive images parameter is set to Yes only in the period of 15 seconds after alarm is registered, the pictures are being stored into the memory (ca. 10 images) next storing will be done after new event happens, which means that the current must previously end user will be notified if SMS notification is set up properly and turned on (see next chapter) Video server title arbitrary title for video server that will be inserted into SMS message to define the origin of alarm (e.g. name of the object observed etc.) SMS center number - defined by particular network operator whose SIM card is applied in particular Telmoss device. Image recording and SMS sending procedures are sequentially performed: alarm occurrence at Zone X --> image archiving from Camera X (15 secs, if turned on) --> SMS sending to all users who set SMS reception to Yes Once the SMS is sent (for particular camera/zone), next SMS indication (for the same camera/zone), will be sent: in the case of first, new alarm which occurs min. 60 minutes after last SMS sending OR immediately when new alarm occurs BUT only if previously an user was connected to Telmoss in the mean time. Telmoss user s guide 23/42 Telmoss user s guide 24/42

14 Setting Date/Time This function sets real time clock and date on Telmoss central unit. Date/time must be entered using appropriate format. When modification is done, soft key Back must be pressed. In that moment client application sends the update message to Telmoss. If everything is ok, following message appears: Hanging up In order to hangup the line (disconnect from server) menu item Hangup must be selected. Following screen appears: Figure 20 Figure 21 After Yes is pressed, few seconds are needed for the line to be disconnected and for application to return to the main menu (off-line). IMPORTANT NOTES Most of Symbian OS phones have connection status icon drawn at the top-right corner of the screen as follows: As long as this icon is visible, the connection is in progress and normally all time spent in this state is charged by network operator. If everything is ok with application execution, after the hangup operation is performed, this icon MUST disappear! If it remains, even if Telmoss mobile application is returned to off-line menu, user must break the connection manually (e.g. pressing end call key, usually marked with picture of red handset ) Telmoss user s guide 25/42 Telmoss user s guide 26/42

15 Telmoss PC Installing Telmoss PC application Put the enclosed CD into CD drive of personal computer running Windows XP OS. There is a file named Setup.exe placed inside TelmossPC folder. Run the application and follow the procedure below: Figure 22 TelmossPC application is now installed on your PC and ready to run. Press Next......enter your information and press Next..check the data and press Next... Select the destination folder and that is all. Telmoss user s guide 27/42 Telmoss user s guide 28/42

16 Running the application After the application has been started, following window appears: Profiles Managing the Profiles main menu main menu icons Figure 24 Add New Profile, Change Profile and Delete Profile functions manage the connection profiles. Following screen shows the profile content: connection profile list status bar Figure 23 Main menu contains all program functions available. Some of them are enabled only when connection is established. Main menu icons graphical shortcuts to most important functions Connection profile list contains all predefined connection profiles. This list is visible only in off-line time. Once the connection is established it is exchanged with new, online contents. Status bar indicates current line status and shows connection time. Figure 25 Telmoss user s guide 29/42 Telmoss user s guide 30/42

17 To set the communication device (Modem/Line) select one from the pull-down list. IMPORTANT NOTES There are two different device types that can be used for communication between PC and Telmoss. 1. Standard modem. Uses standard, analog modem over fix phone line or installed GSM device as modem (e.g. mobile phone) for communication in CSD mode. 2. Direct cable. Normally this device is listed as Direct to COMx. For that purpose PC COM port must be connected direct with Telmoss C1 connector (Figure 3, pos 4) using NULL modem cable. In that case maximum communication speed is achieved. For the details on other Profile parameters, please see Chapter Telmoss mobile/connection profiles. Connecting to the server If a profile is defined, it can be selected in the list among the others by pressing left mouse button. Click the menu item Connect to Server or press icon. Following window pops up: Figure 26 After seconds, connection should be established and user has to enter the PIN code in order to enter on-line menu: If wrong PIN is entered, user has 2 more times to retry. Otherwise the connection is broken. Telmoss user s guide 31/42 Telmoss user s guide 32/42

18 On-line menu Live images After the user has been logged in to the server, entering correct PIN, main window content is changed: Swapping between cameras can be performed simply by pressing proper Camera icon (only cameras marked with green icon are available) Single image transfer s time depends on the connection speed and preset Image Parameters. Since the original image captured by Telmoss is in resolution 640x480 pixels, the zoom of 4x or 2x can be obtained if selected size for receiving images is set to 160x120 or 320x240 respectively. When image transfer is stopped (pressing again the appropriate camera button, when it goes in up position) following icons become enabled: image parameter box Pressing the particular zoom level, user can select the area of interest inside the entire image (yellow rectangle): main function bar camera selection buttons transfer progress bar Figure 28 Once the area is defined, pressing the appropriate camera button again, starts the transfer of selected region in full format. Figure 27 In order to receive an image from a camera, follow the procedure: On Main function bar select Live picture icon Set Image parameters Press the camera icon from which the image will be captured Observe the Transfer progress bar. When it reaches right-end position image is drawn on the screen and the transfer of next image begins. NOTE All received images are automatically stored to the computer s disk drive in the folder predefined in Options/Picture folder function AND if Options/Save Pictures property is turned on (checked). Telmoss user s guide 33/42 Telmoss user s guide 34/42

19 Archived images On Main function bar select Archive. New content appears: NOTE: for archive images only Quality parameter can be set among the Image Parameters if Options/Save Pictures property is turned on, all received images will be stored to Options/Picture folder resetting the archive all records are erased Setting the system parameters On Main function bar select Settings. New contents appears: archive images list control buttons Figure 29 First the list is being loaded. Depending on the total number of list records and connection speed, the list transfer can take up to few seconds. Once the list is loaded it is shown in the table. Each record is determined by camera number(k1-k4) and time/date stamp. Particular image can be loaded selecting appropriate record in the list and pressing Load archive button. Multiselection is also possible using CTRL key in the combination with Left Mouse Key. If more images are selected, transfer is performed sequentially starting with the top-most selected record in the table. The archive is erased pressing Reset archive button. Figure 30 Telmoss user s guide 35/42 Telmoss user s guide 36/42

20 To change Date/Time on Telmoss press Set Time button. New time/date will be set to PC time/date value. To verify the update press Check Time button. To set SMS reception parameters (SMS phone number, SMS center number, Video server name, enable SMS reception box) enter the values and press Apply button. To set Activity Detection parameters just enter/set new values and the update will be done immediately on the server as well. NOTE For the details on System Parameters, please refer to Chapter Telmoss mobile/parameters. Solving problems No power indication Power supply adapter is plugged in to mains power and connected to Telmoss but no LED indication is active. When Telmoss is switched to mains power it takes seconds that Red Power Supply LED indicator (Figure 4, pos 7) starts to flash (Figure 4, pos 7) and additional seconds for boot sequence to be completed. GSM signal LEDs flash 3 green GSM signal indicators (Figure 4 pos 8) blink continuously. Check the signal coverage and verify that SIM PIN control has been turned off. Connection fails Connection from client application to Telmoss fails or is not possible. With Network operator check that SIM card applied in Telmoss, is capable of receiving Incoming Data Calls. Check the format of phone numbers entered in client applications. NOTE For any additional details or technical support, please contact info@telitalmobitel.hr Telmoss user s guide 37/42 Telmoss user s guide 38/42

21 GM862-GPRS Conformity Assessment