N5 Temperature Monitor Starter Guide

Size: px

Start display at page:

Download "N5 Temperature Monitor Starter Guide"

Shonda Hall
5 years ago
Views:

N5 Temperature Monitor Starter Guide For N5-503-G/H and N5-553-G/H External Temperature Probe** Network Indicator Charging Indicator Internal Temperature Sensor* Report Indicator Power Indicator

1 N5 Temperature Monitor Starter Guide For N5-503-G/H and N5-553-G/H External Temperature Probe** Network Indicator Charging Indicator Internal Temperature Sensor* Report Indicator Power Indicator Light Sensor Screw Reset *Light Sensor & Temperature Sensors are available only on some SKUs **In case of External Probe Sensor the Internal temperature sensor will not work. Warning: The Internal Temperature cavity should be exposed to the ambient atmosphere where temperature is to be monitored. This cavity should not be obstructed/covered/blocked by any object. Do not insert finger or any object into this cavity. Please keep this are free from dust, water, and other particles.

2 How to install Micro SIM Card Step 1: Carefully remove the back cover by releasing all plastic latches Front Cover Back Cover Open here using a plastics opener Step 2: Lift the battery. Please do not remove the battery from battery connector Lift the battery here Screw Battery Front Side Battery Cable Reset Button Battery Back Side Battery Connector

Step 3: Install the Micro SIM in the sim card slot

outwards the slot. Step 4: After installing the SIM.

3 Step 3: Install the Micro SIM in the sim card slot SIM card slot Micro SIM card Install the SIM card as shown. The logo upwards and the chipped edge pointing outwards the slot. Step 4: After installing the SIM. Place the battery back, ensure the battery is placed correctly and no cables are protruding outside.

4 Step 5: Install the back cover and press it firmly at the edges to lock it. Install the screw (provided in the box). Screw Reset

5 How to Install the Waterproof Rubber Cover: Sensor seal cover Internal Temperature Sensor LED Indicators Nimble Logo External Temperature Probe USB Power connector

6 Device hanger Device back plate Device holder External Temperature Probe USB Power connector Note: Before placing the device in the rubber cover make sure the SIM and the Battery are inserted.

Step 1: Place the device inside the rubber cover such that the backside of the device faces front. Insert the USB connector as shown in the figure through the rubber cover.

7 Step 1: Place the device inside the rubber cover such that the backside of the device faces front. Insert the USB connector as shown in the figure through the rubber cover. Stick the device with Anabond glue to the rubber cover. USB Power connector Step 2: Fix the back side plate as shown in the below. Device back side Device Water proof cover USB Charger External Temperature Probe

8 Step 3: Seal the back side cover with Anabond glue. Place the sensor seal cover in the front and shown and fix it. Please contact for support.

Charging the device Charging the device: Insert the micro-usb connector at one of the charging cable into the micro-usb charging port of the device and connect the USB end of the cable to the Charger

9 Charging the device Charging the device: Insert the micro-usb connector at one of the charging cable into the micro-usb charging port of the device and connect the USB end of the cable to the Charger Connect the charger to a power socket as shown in the picture above. The power indicator and the charging indicator will glow Red. Once charging is completed (after a few hours), the charging indicator will turn off. But, the power indicator keeps glowing as long as the device is plugged into the power socket. The device comes pre-activated on the Verizon cellular network, so all you need to do is to charge the device and it latches on to the Verizon cellular network automatically. Please contact product-support@nimblewireless.com for support.

10 Installing in Refrigerated Truck Refrigerated Trailer Driver Side Temperature Probe Nimble Temperature Road Side Refrigeration unit Road Side Grille Road Side Grille USB Power DC to DC Battery to DC cable Refrigeration unit battery Refrigeration unit

Temperature Probe Road Side Radiator Road Side Grille Nimble Temperature Monitor Refrigeration Unit USB Charger Place the device on the road side grille Place

11 Temperature Probe Road Side Radiator Road Side Grille Nimble Temperature Monitor Refrigeration Unit USB Charger Place the device on the road side grille Place the front side of the device is facing the road Make sure the device is placed intact inside the grille Ensure the device is kept away from any water or dust damage

12 Download the Application Nimble IRIS is available for both Android and ios operating systems. For Android: Go to the Google Play Store on your phone. Search for Nimble IRIS application in Play Store. Download and install the application from Nimble Wireless. Web Application Please type the url iris3.nimblewireless.com in any web browser and use your login ID and password to monitor/configure your asset monitoring devices Please visit the website for for application support

Phone Setup. Phone Hardware Installation. Install the Phone Battery. Phone Hardware Installation, on page 1 Phone Configuration Tasks, on page 15

Phone Setup. Phone Hardware Installation. Install the Phone Battery. Phone Hardware Installation, on page 1 Phone Configuration Tasks, on page 15 Phone Hardware Installation, on page 1 Phone Configuration Tasks, on page 15 Phone Hardware Installation Install the Phone Battery Before you can use your phone, you must install and charge the battery.