FDOT Qualifications Table Quick Reference Guide

Transcription

1 FDOT Qualifications Table Quick Reference Guide Qualification () Aggregate Testing Section Obtain Aggregate Testing - Certification 2. Obtain Concrete Lab 3. Watch FDOT Video Sampling Aggregates the date the last qualification requirement was satisfied. The qualification shall expire on the date of expiration of the Aggregate Testing Certification. details Per Per Aggregate Base Testing Section Obtain Aggregate Base Testing Certification 2. Watch FDOT Video Sampling Aggregates the date the last qualification requirement was satisfied. The Qualification shall expire on the date of expiration of the Aggregate Base Testing. details Per Per Qualified Sampler Section a. Pass Sampler Tech Written b. Pass Sampler Tech Proficiency c. Watch FDOT Video Sampling Aggregates 2. Obtain Aggregate Testing Qualification 3. Obtain Aggregate Base Testing Qualification The date of Qualification shall be date that last requirement was satisfied. The Qualification shall expire in 60 months from date of Last Qualified Sampler Passed; the expiration of the certification. 1 day / 1.0 hour Open 40 LBR Section Be Aggregate Base Testing Qualified 2. Pass LBR Written 3. Pass LBR Proficiency the date the last qualification requirement was satisfied. The Qualification shall expire in 60 months from date of completion of the final LBR exam expire on the date of expiration of the Aggregate Base Testing certification, whichever is earlier. 1 day / 1.0 hour Open 33 10/28/2014 1

2 () Asphalt Paving Section Pass Paving Written 2. Pass Paving Proficiency 1. Asphalt Paving Level I (even if it is expired) is automatically requalified with a successful requalification of Asphalt Paving level 2. Yes 1 day / 2.0 hours- Written /2.0 hour Proficiency 32 Asphalt Paving Section Pass Hot Mix Asphalt Paving Inspection Self Study - 90 Days experience 1. Pass Paving Written 2. Possess an active Asphalt Paving Level I qualification at the time of taking the Asphalt Paving Level II written examination. 3. Have 90 Days experience Pass Level II Written 1. As long as is kept current, the qualification will remain current. 2. An active Asphalt Paving level I qualification is not required as long as level 2 is not expired. 3. If the Paving Level II is expired, the technician will be considered as an initial qualifier and must obtain same requirements as initial. Yes 3 days / 4.0 hours Open Asphalt Plant Section Pass Hot Mix Asphalt 1. Pass Plant Written Testing Self Study 2. Pass Plant Proficiency (CQC Version) Is not automatically requalified with a successful requalification of Asphalt Plant Level II. 3 day / 2.0 hours- Written /4.0 hour Proficiency Asphalt Plant Section Pass Plant Written Pass Hot Mix Asphalt 2. Possess an active Asphalt Plant Level Plant Inspection Self I qualification at the time of taking the Study (CQC Version)- Asphalt Plant Level II examination. 90 Days experience 3. Have 90 Days experience Pass II written 1. An active Asphalt Plant Level I qualification is not required as long as level 2 is not expired. 2. Asphalt Plant Level I is not automatically requalified with a successful requalification of Asphalt Plant Level II. 3 days / 4.0 hours Open Mix Design Section Pass Asphalt Mix Design Written Qualification in this area is 2. Possess an active Asphalt Plant Level indefinite, unless revoked in I qualification at the time of taking the accdance with the CTQM Asphalt Mix Designer qualification. 3. Have 90 Days Experience t required to retake Plant written exam f re-qualification as long as Mix Design is not expired. 3 day / 4.0 hours Open Final Estimates Section Pass Construction Math and Contract Plans Reading Self Study 1. Pass FE Level I Written Same as initial Qualification Manual Revision: 1/8/07 Yes CBT/2 hours ( ) Final Estimates Section Hold a FE Qualification 1. Pass FE II Written 2. Level I FE Qualification Pass FE Written Manual Revision: 1/8/07 As long as is kept current, the qualification will remain current. 2 Days/2 hours 10/28/2014 2

3 () Concrete Field Section Concrete Field Testing Tech Grade 1 Certification 2. Pass FDOT Concrete Field Inspect Spec. Written Manual Revision: 9/30/08 the date that the last requirement was satisfied. The qualification shall expire in (5) five years (60) months from the FDOT spec exam the date of expiration of the Concrete Field Grade I certification (whichever is earlier). 3 days / 2 1/2 hours FDOT Concrete Field Open 1. a. Concrete Field Testing Tech Grade 1 Certification Concrete Field Test Section b. Concrete Transptation Construction Inspect (CTCI) Certification a. Concrete Field Testing Tech Grade 1 Certification b. Associate Concrete Transptation Construction Inspect (CTCI) Certification Manual Revision: 7/1/11 date that last requirement was satisfied. The qualification shall expire in (5) five years (60) months from the FDOT spec exam the date of expiration of the earliest required certification (whichever is earlier). 2 days / 2.0 hours FDOT Concrete Field Open Concrete Lab Section Pass FDOT Concrete Field Inspect Spec. 1. Concrete Strength Test Tech Certification 2. Concrete Lab Testing Tech Level 1 Certification a. requires the following to obtain this certification: i. Concrete Strength Testing ii. Aggregate Testing - iii. Both Concrete Strength Testing and Aggregate Testing - MUST be taken within 2 years of each other. Manual Revision: 9/30/08 The qualification shall expire in 60 months from the required certification details Per Per 10/28/2014 3

4 () Concrete Lab Section Concrete Lab Testing Tech Level 1 Certification a. requires the following to obtain this certification: i. Concrete Strength Testing ii. Aggregate Testing - iii. Both Concrete Strength Testing and Aggregate Testing - MUST be taken within 2 years of each other. 2. Concrete Lab Testing Tech Level 2 Qualification in this area is indefinite, unless revoked in accdance with the CTQM of Manual Revision: 9/30/08 The date of qualification shall be the date that last requirement was satisfied. The qualification shall expire in 5 years (60 months) the earliest expiration date of one of the required Certification(s). 1 day / 2.0 hours FDOT Concrete Lab lab exam details per Open Open Spec. 3. Pass FDOT Concrete Lab Inspect Specification (Section 4.5.6) Concrete Batch Plant Operat Section Have One year experience 1. Pass Concrete Batch Plant Operat Written 2. Have 90 days wk experience Manual Revision: 9/30/08 Independent Self Study 2.0 hours Open Study Guide and/ Materials Manual only Earthwk Construction Inspection Section Hold a valid nuclear radiation safety certificate 1. Pass Earthwk Written exam 2. Pass Earthwk Proficiency 3. Valid Nuclear Radiation Safety Certificate 1. Pass Earthwk Written exam 2. Valid Nuclear Radiation Safety Certificate Manual Revision: 1/12/06 NOTE: Applicants letting their qualification expire will be required to pass the Earthwk written and proficiency examinations Yes 2 days / 2 hours Earthwk Construction Inspection Section Pass Construction Math, Contract Plans Reading, Earthwk Inspection, Subgrade and Base Inspection Self Studies and FDOT Pipe Placement Inspection Self-Study 1. Pass Earthwk Written 2. Pass Earthwk Written 3. Have 30 days wk experience Pass Earthwk Written exam Manual Revision: 1/12/06 Applicants letting their qualification expire will be required to meet all the Earthwk qualification requirements Yes 2 days / 2.0 hours ; Open Spec & Indexes 10/28/2014 4

5 () 1. Pass QC Manager Written QC Manager Section Pass Construction Math Self Study 2. Hold at least one of the following qualifications: a. LBR Tech c. Asphalt Paving d. Asphalt Plant e. Concrete Field Tech (Full -CTCI Cert) f. Concrete Lab Tech g. ECI Qualification in this area is indefinite, unless revoked in accdance with the CTQM Manual Revision: 5/18/2007The qualification shall expire in 5 years (60 months) from the QC Manager exam the qualification, whichever is earliest because MUST hold at the same time. Yes 2 days / 2.0 hours Pile Driving Inspection Section 6.6 (1) Review: Section 455, FDOT Specifications + An FDOT project plan set. (2) Pass, Contract Plans Reading, Structures 1. Pass PDIT Written Inspection - Part I & 2. Have 30 Days experience (observation II. by qualified inspect) (3) Pass the electronic Pile Driving Self-Study Tutials pri to attending the written examination. (4) Computer Field Data Entry Self-Study tutial. Pass PDIT Written Manual Revision: 10/29/ days / 2.5 hours Open Drilled Shaft Inspection Section 6.7 (1) Review: Section 455, FDOT Specifications + An FDOT project plan set. (2)Pass Construction Math, Contract Plans Reading, Structures Inspection - Part I & II, ing, Pass Drilled Shaft Inspection Self Study Tutial. 1. Pass DSIT Written 2. Pass DSIT Proficiency 3. Have 30 Days experience (observation by qualified inspect) Pass DSIT Written Manual Revision: 10/29/2010 NOTE: Applicants letting their qualification expire will be required to pass the Drilled Shaft written and proficiency examinations Open 2.5 days / 2.5 hours Open Spec. 10/28/2014 5

6 () Qualified Grouting Section Take FDOT accredited Grouting course and pass examination pass re-qualification course F accredited grouting training courses, consult: ning ng-recertification/index.cfm t A t a Qualified Grouting Section Take FDOT accredited Grouting course and pass examination 2. Have 2,000 hours certified grouting wk experience Take Grouting course and pass examination pass requalification course F accredited grouting training courses, consult: ning ng-recertification/index.cfm t A t a Post Tensioning Section Take FDOT accredited Post Tensioning course and pass examination F accredited PT training courses, consult: t A t a Post Tensioning Section Take FDOT accredited Post Tensioning course and pass examination 2. Have 2,000 hours certified PT wk experience F accredited PT training courses, consult: t A t a 10/28/2014 6