January to June TRUMPF Laser Schramberg. Training. The course program. Machine tools / Power tools Laser technology / Electronics

Transcription

1 January to June 2018 TRUMPF Laser Schramberg Training The course program Machine tools / Power tools Laser technology / Electronics

2 Preface Training provides security With your TRUMPF laser you have acquired an excellent high-tech system. Whatever the task - welding, cutting, labeling or using the tool for other jobs: The respective machining process always requires exact compliance with all parameters involved in the process. This is true for clamping and positioning as well as for the laser tool itself. In the training courses at our Schramberg training center you get to know your laser and its functions in detail. The training makes you more assured in your daily work and ensures that you can utilize the full potential of your laser. Furthermore, our online support can be ideally combined with a training and up to 80% of all faults are immediately remedied. With our safety-certified online support we offer you a worldwide unique service. Once our specialists have been enabled online, they can monitor and control all functions of the laser, diagnose errors and generally remedy these errors. Idle times and service missions on site are thus reduced to a minimum. 2

3 Our know-how is your gain Our trainings are aimed mainly at employees who work with the laser system or are responsible for maintenance and repair. Experienced service technicians and specialists from our development department pass on their in-depth know-how tailored to the requirements of the participants. The training participants get to know the structure and the function of their laser system. Maintenance and error detection and elimination are practiced. The focus is hereby on the device technology. The basic theory of laser application is communicated and practical exercises are carried out. Special application trainings are offered separately. 3

4 TruDisk 1-16 kw For disk lasers of series TruDisk 1 to 16 kw (4C, 6C to 2 kw, 6C as of 2 CW, FD27) we offer the following trainings: Operator course This training is aimed at whoever works with the laser system and carries out operations such as operation, programming and parameterization, setup work and simple mechanical maintenance work. General technical knowledge is an advantage for the training participants. Course duration: 3 days Course information and dates Duration Language CW from to Operator course TruDisk 1 16 kw (4 C) 3 days German TruDisk 1 16 kw (6 C to 2 CW) 3 days German TruDisk 1 16 kw (6C as of 2 CW) 3 days German TruDisk 1 16 kw (FD27) 3 days German

5 TruDisk 1-2 kw (6C) We offer the following trainings for disk lasers of the series TruDisk 1 to 2 kw (6C): This training is aimed at whoever works with the laser system and carries out operations such as maintenance and repair, laser integration, programming or setup work. General electrical engineering knowledge is an advantage for the training participants. Follow-on course Operator course PFO Course duration: 1 day Mat. no.: Course duration: 4 days Mat. no.: Course information and dates Duration Language CW from to TruDisk 1 2 kw (6 C) 4 days German Operator course PFO 1 day German TruDisk 1 2 kw (6 C) 4 days English PFO operator course 1 day English

6 TruDisk 3-12 kw (6 C) We offer the following trainings for disk lasers of the series TruDisk 3 to 12 kw (6C): This training is aimed at whoever works with the laser system and carries out operations such as maintenance and repair, laser integration, programming or setup work. General electrical engineering knowledge is an advantage for the training participants. Follow-up course Operator course PFO Course duration: 1 day Mat. no.: Course duration: 4 days Mat. no.:

7 Course information and dates Duration Language CW from to TruDisk 3 12 kw (6 C) 4 days German Operator course PFO 1 day German TruDisk 3 12 kw (6 C) 4 days German Operator course PFO 1 day German TruDisk 3 12 kw (6 C) 4 days German Operator course PFO 1 day German TruDisk 3 12 kw (6 C) 4 days German Operator course PFO 1 day German TruDisk 3 12 kw (6 C) 4 days English Operator course PFO 1 day English TruDisk 3 12 kw (6 C) 4 days English Operator course PFO 1 day English

8 TruDisk 1 6 kw (FD27) We offer the following trainings for disk lasers of the TruDisk 1 to 6 kw series (FD27): This training is aimed whoever works with the laser system and carries out operations such as maintenance and repair, laser integration, programming or setup work. General electrical engineering knowledge is an advantage for the training participants. Follow-up course Operator course PFO Course duration: 1 day Mat. no.: Course duration: 4 days Mat. no.: Course information and dates Duration Language CW from to TruDisk 1 6 kw (FD27) 4 days German Operator course PFO 1 day German TruDisk 1 6 kw (FD27) 4 days German Operator course PFO 1 day German

9 9

10 TruDisk Pulse series We offer the following trainings for the TruDisk Pulse series: This training is aimed at whoever works with the laser system and carries out operations such as PFO introduction - p.16 maintenance and repair, laser integration, programming or setup work. General electrical engineering knowledge is an advantage for the training participants. Follow-up course PFO operator course Course duration: 1 day Mat. no.: Course duration: 3 days Note: Dates for holding an operator training are available on request and are tailored to the individual requirements of our customers. Course information and dates Duration Language CW from to TruDisk Pulse series 4 days German Operator course PFO 1 day German TruDisk Pulse series 4 days German PFO operator course 1 day German

11 TruPulse We offer the following courses for pulsed laser devices of the TruPulse series: Operator course This training is aimed at all persons who work with the laser system and carry out activities such as operation, programming and parameterization, setup work and simple mechanical maintenance work. General technical knowledge is an advantage for the training participants. Follow-up course PFO operator course Course duration: 1 day Mat. no.: Course duration: 3 days Mat. no.: Course information and dates Duration Language CW from to Operator course TruPulse days German PFO operator course 1 day German TruPulse days German PFO operator course 1 day German

12 TruDiode We offer the following trainings for the series TruDiode to 1 kw and 2-6 kw: Operator course TruDiode to 1 kw This training is aimed at all persons who work with the laser system and carry out activities such as operation, programming and parameterization, setup work and simple mechanical maintenance work. General technical knowledge is an advantage for the training participants. Course duration: 3 days Mat. no.: TruDiode 2-6 kw This training is aimed at whoever works with the laser system and carries out operations such as maintenance and repair, laser integration, programming or setup work. General electrical engineering knowledge is an advantage for the training participants. Course duration: 4 days Mat. no.: Note: Dates for holding these trainings are available on request. PFO 20-2 PO with temperature control - p.13 Follow-up course Programming course PFO 20-2 PO with Temperature control Course duration: 2 days Mat. no.:

13 Course information and da- Duration Language CW from to Operator course TruDiode to 1 KW 3 days German PFO 20-2 PO with TR 2 days German Operator course TruDiode to 1 KW 3 days English PFO 20-2 PO with TR 2 days English TruDiode 2-6 KW 4 days German On request 13

14 TruMicro 2000 We offer the following trainings for the TruMicro 2000 ultra-short-pulse laser: Operator course This training is aimed at whoever works with the laser system and carries out operations such as operation, programming and parameterization, setup work and simple mechanical maintenance work. General technical knowledge is an advantage for the training participants. Course duration: 3 days Mat. no.: Course information and dates Duration Language CW from to Operator course TruMicro days German

15 TruMicro 5000 Compact We offer trainings for the TruMicro 5000 ultra-short-pulse laser: This training is aimed at whoever works with the laser system and carries out operations such as maintenance and repair, laser integration, programming or setup work. General electrical engineering knowledge is an advantage for the training participants. Course duration: 4 days Mat. no.: Course information and da- Duration Language CW from to TruMicro 5000 Compact 3 days German

16 TruMicro 5370/5380 We offer the following training for the TruMicro 5370/5380 ultra-short-pulse laser: This training is aimed at all persons who work with the laser system and carry out activities such as maintenance and repair, laser integration, programming or setup work. General electrical engineering knowledge is an advantage for the training participants. Course duration: 3 days Course information and dates Duration Language CW from to TruMicro 5370/ days German

17 TruMicro 7370/7380 We offer the following trainings for the TruMicro 7370/7380 ultra-short-pulse laser: This training is aimed at whoever works with the laser system and carries out operations such as maintenance and repair, laser integration, programming or setup work. General electrical engineering knowledge is an advantage for the training participants. Course duration: 3 days Course information and dates Duration Language CW from to TruMicro 7370/ days German

18 TruMicro 7050/7060/7240 We offer the following training for the TruMicro 7050/7060/7240 ultra-short-pulse laser series: This training is aimed at whoever works with the laser system and carries out operations such as maintenance and repair, laser integration, programming or setup work. General electrical engineering knowledge is an advantage for the training participants. Course duration: 3 days Mat. no.: Course information and dates Duration Language CW from to TruMicro 7050/7060/ days German TruMicro 7050/7060/ days English

19 TruFiber We offer the following training for the TruFiber fiber laser series: This training is aimed at whoever works with the laser system and carries out operations such as maintenance and repair, laser integration, programming or setup work. General electrical engineering knowledge is an advantage for the training participants. Course duration: 3 days Mat. no.: Note: Dates for holding these trainings are available on request. Course information and dates Duration Language CW from to TruFiber days German On request TruFiber days English On request 19

20 TruLaser Station 5005 We offer the following training for the Trulaser Station 5005 laser system: Operator course for TruLaser Station 5005 This trainings is aimed at whoever carries out welding applications on the laser system or tasks such as programming and setup work. General technical knowledge is an advantage for the training participants. Follow-up courses Vision Line Detect - Basic Course duration: 2 days Vision Line Detect - Systems Course duration: 1 day Course duration: 3 days Mat. no.: Course information and dates Duration Language CW from to Operator course TruLaser Station days German TruLaser Station days German TruLaser Station days German Operator course TruLaser Station days English TruLaser Station days English

21 21

22 Vision Line We offer the following training for Vision Line: Vision Line Detect - Basic This course is aimed at whoever wants to acquire basic knowledge of integrating image processing programs into their production process. Course duration: 2 days Mat. no.: Note: A basic knowledge of operating a laser device with TruControl 1000 and knowledge of operating a PFO is required to participate. The course is carried out on a PFO with exercise sections of the training center. Vision Line Detect - Systems This course is aimed at whoever wants to acquire expertise in safely working with the Vision LIne software in connection with the 3D TRUMPF machines, as well as practical creation and customization of programs. Course duration: 1 day Mat. no.: Note: Participation in the Vision Line Detect basic course and in the operator course of the respective TRUMPF machine (e.g. TruLaser Station 5005) is required to participate. Prior knowledge of CNC variable programming is necessary. The course is generally carried on a TruLaser Station 5005 with exercise sections of the training center. 22

23 Course information and dates Duration Language CW from to Basic course Vision Line Detect - Basic 2 days German Vision Line Detect - Basic 2 days German Basic course Vision Line Detect - Basic 2 days English Vision Line Detect - Basic 2 days English Course Vision Line - Systems 1 day German Course Vision Line - Systems 1 day English

24 PFO introduction We offer the following training for the PFO introductory course: PFO introduction This course is aimed at whoever operates laser devices with a programmable focusing optics. This course provides you with basic knowledge of optics and their interfaces. Furthermore, the course covers the operation and the programming of the PFO editor and practical exercises. Course duration: 1 day Mat. no.: Note: Requirement for participation is attending a laser course. 24

25 Course information and dates Duration Language CW on the Introductory course PFO introduction 1 day German PFO introduction 1 day German PFO introduction 1 day German PFO introduction 1 day German PFO introduction 1 day German Introductory PFO course PFO introduction 1 day English PFO introduction 1 day English PFO introduction 1 day English

26 TruMark 1 day TruMark newcomers 2 days TruTops Mark professional course 1 day TruMark 3000/5000 maintenance course TruMark 6000 maintenance TruMicro Mark maintenance course 1 day TruMark 3000/5000 maintenance course TruMark 6000 maintenance course The TruMark newcomer course is aimed at operators who have no had no previous experience with the marking laser. The course is an ideal preparation for the TruMark operator software course. Participation in the TruMark professional operator software course is required to participate in a maintenance or repair course for the TruMark series. 26

27 TruMark newcomer We offer the following training for Trumark newcomers: Newcomer (operator software course) This training is aimed at whoever is not yet familiar with the topic of marking lasers. The goal is to build up the basic knowledge required to participate easily in the TruMark professional course. Course duration: 1 day Mat. no.: Note: Dates for holding these trainings are available on request. Course information and dates Duration Language CW from to Newcomer (operator software) Newcomer 1 day German On request 27

28 TruMark Professional (operator software) We offer the following training for the TruMark software: TruTops Mark professional course This training is aimed at whoever wants to learn the TruMark software and wants to acquire knowledge for complex applications of the Tru- Mark programs. Course duration: 2 days Mat. no.: Note: This course is a requirement for participating in the TruMark maintenance and repair course. The courses marked with a * can only be booked together with a TruMark maintenance and repair course. Course information and dates Duration Language CW from to Professional course (operator software) TruMark professional 2 days German TruMark professional 2 days German TruMark professional * 2 days German TruMark professional * 2 days German TruMark professional 2 days German TruMark professional 2 days German TruMark professional * 2 days German TruMark professional 2 days German TruMark professional * 2 days German

29 Course information and dates Duration Language CW from to Professional course (operator software) TruMark professional 2 days German TruMark professional 2 days German TruMark professional * 2 days German TruMark professional * 2 days German TruMark professional 2 days German TruMark professional 2 days German TruMark professional * 2 days German TruMark professional * 2 days German TruMark professional 2 days German TruMark professional 2 days German TruMark professional * 2 days German TruMark professional * 2 days German TruMark professional 2 days German TruMark professional 2 days German TruMark professional * 2 days German TruMark professional * 2 days German TruMark professional 2 days German TruMark professional 2 days German TruMark professional 2 days German TruMark professional * 2 days German TruMark professional * 2 days German TruMark professional 2 days German TruMark professional 2 days German

30 TruMark 3000/5000 Maintenance We offer the following trainings for the TruMark 3000/5000 series: TruMark 3000/5000 This training is aimed at whoever is responsible for the maintenance work on laser system and operations such as changing filter and pump modules. Course duration: 1 day Mat. no.: Note: The maintenance course can only be booked together with the above described TruMark Professional course. TruMark 3000 / 5000 with TruTopsMark 1 day German TruMark 3000 / 5000 with TruTopsMark 1 day German TruMark 3000 / 5000 with TruTopsMark 1 day German TruMark 3000 / 5000 with TruTopsMark 1 day German TruMark 3000 / 5000 with TruTopsMark 1 day German TruMark 3000 / 5000 with TruTopsMark 1 day German TruMark 3000 / 5000 with TruTopsMark 1 day German

31 TruMark 3000/5000 maintenance We offer the following trainings for the TruMark 3000/5000 series: TruMark 3000/5000 maintenance course This training is aimed at whoever wants to carry out simple repairs on the laser system, such as replacing boards or checking the power. Note: The maintenance course can only be booked together with the previous maintenance course. Course duration: 1 day Mat. no.: Course information and dates Duration Language CW on the TruMark 3000 / 5000 with TruTopsMark 1 day German TruMark 3000 / 5000 with TruTopsMark 1 day German TruMark 3000 / 5000 with TruTopsMark 1 day German TruMark 3000 / 5000 with TruTopsMark 1 day German TruMark 3000 / 5000 with TruTopsMark 1 day German TruMark 3000 / 5000 with TruTopsMark 1 day German TruMark 3000 / 5000 with TruTopsMark 1 day German

32 TruMark 6000 maintenance We offer the following trainings for the TruMark 6000 series: TruMark 6000 maintenance course This training is aimed at whoever is responsible for the maintenance work on laser system and operations such as changing filter and pump modules. Course duration: 1 day Mat. no.: Note: The maintenance course can only be booked together with the above described TruMark Professional course. TruMark 6000 with TruTopsMark 1 day German TruMark 6000 with TruTopsMark 1 day German TruMark 6000 with TruTopsMark 1 day German TruMark 6000 with TruTopsMark 1 day German TruMark 6000 with TruTopsMark 1 day German TruMark 6000 with TruTopsMark 1 day German TruMark 6000 with TruTopsMark 1 day German

33 TruMark 6000 maintenance We offer the following trainings for the TruMark 6000 series: TruMark 6000 maintenance course This training is aimed at whoever wants to carry out simple repairs on the laser system, such as replacing boards or checking the power. Note: The maintenance course can only be booked together with the previous maintenance course. Course duration: 1 day Mat. no.: Course information and dates Duration Language CW on the TruMark 6000 with TruTopsMark 1 day German TruMark 6000 with TruTopsMark 1 day German TruMark 6000 with TruTopsMark 1 day German TruMark 6000 with TruTopsMark 1 day German TruMark 6000 with TruTopsMark 1 day German TruMark 6000 with TruTopsMark 1 day German TruMark 6000 with TruTopsMark 1 day German

34 TruMicro Mark We offer the following trainings for the TruMicro Mark series: TruMicro Mark maintenance course This training is aimed at whoever wants to carry out simple repairs on the laser system, such as replacing boards or checking the power. Course duration: 1 day Mat. no.: Note: Dates for holding these trainings are available on request. Course information and dates Duration Language CW on the TruMicro Mark 1 day German On request 34

35 TruTops PFO We offer the following training for TruTops PFO course: TruTop PFO operator and programming course This course is aimed at whoever wants to acquire basic knowledge of TruTops PFO software in order to create complex processing programs for programmable focusing optics, such as PFO and SFO. Course duration: 2 days Mat. no.: Note: Knowledge of the mechanical structure and mode of operation of programmable focusing optics is required to participate. Course information and dates Duration Language CW from to Operator and programming course TruTops PFO 2 days German Operator and programming course TruTops PFO 2 days English

36 I-PFO We offer the following training for the I-PFO: I-PFO (operator and programming cour- The I-PFO (intelligent PFO) is a PFO focusing optics software and is connected to a robot and a TruDisk laser. The I-PFO is used as tool for welding. The I-PFO starts the processing based on information about the current robot movement, which is continuously transferred. It knows the exact time and point at which to weld. Note: Attendance at a laser course and a robot training is required to participate. Dates for holding these trainings are available on request. A camera and an image analysis software can be used to check whether the welding seam is OK or needs to be corrected. The course provides basic knowledge on communicating between laser device, robot and focusing optics. Practical exercises are carried out by TRUMPF on the exercise workpieces. Course duration: 3 days Mat. no.:

37 Course information and dates Duration Language from to I-PFO course I-PFO 3 days German On request I-PFO course I-PFO 3 days English On request 37

38 TruTops I-PFO We offer the following training for TruTops I-PFO: TruTops I-PFO (software course) TruTops I-PFO is an offline tool for designing a process-optimized I-PFO remote process. This training is aimed at trained operators and programmers that use an I-PFO. Course duration: 2 days Mat. no.: Notes: Basic knowledge of laser operation and knowledge of programmable focusing optics, participation in the I-PFO course, as well as participation confirmation of a course on KUKA robot control, such as KRC4 (offers via KUKA College website), are required for the participation. Dates for holding these trainings are available on request. 38

39 Course information and dates Duration Language from to TruTops I-PFO course TruTops I-PFO 2 days German On request TruTops I-PFO course TruTops I-PFO 2 days English On request 39

40 SeamLine Remote We offer the following training for SeamLine Remote: SeamLine Remote This course is aimed at whoever wants to acquire basic knowledge of SeamLine Remote. The course covers the theoretical basics and practical exercises are carried out. Course duration: 2 days Mat. no.: Note: A basic knowledge of operating a laser device with TruControl 1000 and knowledge of operating a PFO is required for participation. Dates for holding these trainings are available on request. Course information and dates Duration Language from to SeamLine Remote course SeamLine Remote 2 days German On request SeamLine Remote course SeamLine Remote 2 days English On request 40

41 41

42 Individual special courses Ask us Dates and contents for holding this course are available on request. Special courses You have the option of taking individual special courses in addition to our catalog courses. The contents of these special courses is configured in close cooperation with you. Course duration: Individual Note: Special courses depend on the availability of the required laser devices, training rooms and training presenters. 42

43

44 TRUMPF is certified according to ISO 9001:2008 (for more information refer to ID no _2018_Web Subject to modification V 2.0 TRUMPF Laser GmbH Training + Application Center Benzstrasse Dunningen Telephone +49 (0) Fax +49 (0) training.tls@de.trumpf.com Website

45