Service Description: FTTC Test Sandpit

Transcription

1 Test Agreement Supporting Document for Test Description: TM FTTC Test Service Description: FTTC Test This document is being provided for the purposes of the Test Agreement for the FTTC Test only. It should not be regarded as an offer to amend the Wholesale Broadband Agreement. This Agreement is a Standard Form of Access Agreement for the purposes of Part XIC of the Competition and Consumer Act 2010 (Cth) where one is required for NBN Co to supply a Test Product

2 NBN Co Limited Service Description: FTTC Test Supporting Document for Test Description: FTTC Test Network: FTTC Version Description Effective Date Copyright 1.0 Supporting Document for the purposes of the Test Description: FTTC Test This document is subject to copyright and must not be used except as permitted below or under the Copyright Act 1968 (Cth). You must not reproduce or publish this document in whole or in part for commercial gain without the prior written consent of. You may reproduce and publish this document in whole or in part for educational or non-commercial purposes as approved by in writing. Copyright 2017 Limited. All rights reserved. Not for general distribution. Disclaimer This document is provided for information purposes only. The recipient must not use this document other than with the consent of and must make their own inquiries as to the currency, accuracy and completeness of this document and the information contained in it. The contents of this document should not be relied upon as representing s final position on the subject matter of this document, except where stated otherwise. Any requirements of or views expressed by in this document may change as a consequence of finalising formal technical specifications, or legislative and regulatory developments. Environment asks that you consider the environment before printing this document. Execution Date of Test Description: FTTC Test 2

3 Introduction Introduction This document describes the FTTC Test service provided by to. The FTTC Test permits to conduct specified testing and development activities comprises the following four services delivered from portions of the Infrastructure that are quarantined from the Platform and the Network used by to supply Ethernet and the Platform Interfacing Service. FTTC Test Service Description Document Structure Part A: FTTC Test Description Part A describes the testing activities which can be performed and sets out the connectivity requirements for use of the FTTC Test. Part A: FTTC Test Description 1 Testing activities 4 2 FTTC Test Connectivity 5 Page Part B: General Conditions of Supply Part B sets out general conditions (with exclusions) governing the supply of the FTTC Test to customers. Part B: General Conditions of Supply 1 Availability and exclusions 10 Page 3

4 Part A: FTTC Test Description Part A: FTTC Test Description 1. Testing activities This section 1 sets out the testing activities which may perform using the FTTC Test. 1.1 Function of the FTTC Test The FTTC Test is a service made available by to only for the testing and verification activities set out in this section 1. must not use the FTTC Test to supply any products or services to Downstream s or End Users or third parties without the prior written consent of. 1.2 NEBS testing activities may use the FTTC Test to: prepare for and perform; (i) (ii) (iii) (iv) Pre-Certification Testing; Equipment testing; development activities; and any related or ancillary activities in respect of the FTTC Test Product delivered by means of the NBN Co FTTC Test Network (Testing and Development Activities); and conduct any other activities which undertakes in an SAU to provide to in the FTTC Test. 4

5 Part A: FTTC Test Description 2. FTTC Test Connectivity The FTTC Test comprises elements that enable to perform Testing and Development Activities. The variations of the FTTC elements that support the Testing and Development Activities are below; (i) The FTTC Test configuration in the diagram below is the standard Test Product configuration, which will be implemented unless and agree to implement the configuration shown in section 2(ii). (ii) The FTTC Test configuration in the diagram below is available only by agreement between and. 5

6 Part A: FTTC Test Description 2.1 Locations of the FTTC Test The FTTC Test is available at the following locations with the following variants, or such other locations notified by to from time to time: Facility Location Facility owner Variant node Sydney, New South Wales Global Switch node Melbourne, Victoria NextGen Networks node Brisbane, Queensland NextGen Networks node Adelaide, South Australia NextGen Networks node Perth, Western Australia NextGen Networks Test Facility Melbourne, Victoria Test Facility Sydney, NSW is responsible for arranging building entry services and physical access to each facility listed in section 2.1, at which supplies the FTTC Test to. 2.2 FTTC Test variants The FTTC Test is available in the following variants: Variant Features / conditions hosts the DPU, RPU and provides or acquires backhaul to establish connectivity between the DPU and a facility listed in section 2.1 where the variant is available. Please note an existing Fibre can be adapted to provide the backhaul for FTTC. hosts the DPU, RPU and provides a UNI-DSL at the Test Facility. 6

7 Part A: FTTC Test Description 2.3 Establishing connectivity and use of the FTTC Test The following table sets out the responsibilities of each party concerning use of the FTTC Test for Testing and Development Activities at each location: Facility location All Locations All Locations Facility Owner NextGen Global Switch NextGen Variant(s) Activity Party responsible Provide or acquire backhaul to establish ENNI connectivity between the Network and the FTTC Test, unless supplies a broadband network gateway, in which case, this requirement is not applicable Provide or acquire backhaul to establish both INNI and ENNI connectivity between the Network and the FTTC Test Provide rack space and power for the FTTC Test variant at a place nominated and arranged by Use of the NNI and CVC must take place remotely over backhaul connecting the Network and the FTTC Test, unless supplies a broadband network gateway, in which case, this requirement is not applicable Use of the UNI-DSL and AVC must take place at a place nominated and arranged by without assistance from Use of the UNI-DSL and AVC must take place at the National Test Facility Provisioning of the UNI-DSL must be arranged by with assistance from Supply DPU and RPU and optical splitter / / / 7

8 Part A: FTTC Test Description Facility location Facility Owner Global Switch Variant(s) Activity Party responsible node, Melbourne node, Brisbane node, Adelaide Terminate backhaul at the ODF port specified by the facility owner Procure or provide cross connects and patches from ODF ports to the ECS ports node, Perth node, Melbourne node, Brisbane NextGen Terminate backhaul at the ODF port specified by the facility owner node, Adelaide node, Perth Procure or provide cross connects and patches from customer s rack to ODF node, Sydney Global Switch Terminate backhaul at a tray location in a meet me room as specified by Procure or provide cross connects, tie cables and patches from tray ports to the ODF 2.4 Performance of Testing and Development Activities will make available to : Capability Description Test Network NNI CVC AVC Mirrors type and structure of NNIs available as a Product Component of the FTTC Test Product provided over the FTTC Test Network as the case may be Mirrors type and structure of CVCs available as a Product Component of the FTTC Test Product provided over the FTTC Test Network, as the case may be Mirrors type and structure of AVCs available as a Product Component of the FTTC Test Product provided over the FTTC Test Network, as the case may be FTTC FTTC FTTC UNI UNI capability provided through FTTC Test services FTTC 8

9 Part A: FTTC Test Description will provide the following items to : Item Description Quantit y Network DPU Distribution Point Unit 2 FTTC RPU Reverse Power Unit 8 FTTC Optical Splitter Optical Splitter 1 FTTC (c) (d) will provide an OLT to if and have agreed to deploy the FTTC Test configuration illustrated in section 2(ii) and there is no remaining capacity on the existing OLT already provided by to as part of the Fibre. is responsible for: (i) installing and operating the DPU, RPU and all Equipment connected to the UNI-DSL in the case of Testing and Development Activities in respect of the NBN Co FTTC Test Network, as the case may be; and (e) (f) must not reconfigure, or attempt to reconfigure, the FTTC Equipment. is responsible for, and assumes risk in the FTTC Equipment, where acquires the variant of the FTTC Test, from the time receives delivery of those items until the time those items are returned to. must return these items to in good working condition. 9

10 Part B: General Conditions of Supply Part B: General Conditions of Supply 1. Availability and exclusions 1.1 Availability The FTTC Test is a shared resource and access to the FTTC Test is subject to availability. acknowledges that use of the FTTC Test may not be continuous or free of faults and that may interrupt use of the FTTC Test at any time. 1.2 Exclusions (c) The FTTC Test is one element required for to perform the testing and development activities described in this Service Description for the FTTC Test. is responsible for providing or acquiring other elements necessary to perform the testing and development activities described in this Service Description for the FTTC Test. The FTTC Test does not include the supply by of: (i) (ii) (iii) (iv) (v) (vi) (vii) any Upstream Backhaul or Downstream Backhaul, interconnecting broadband infrastructure, such as dark fibre or Ethernet links, or other connections for the purposes of Upstream Backhaul or Downstream Backhaul from the FTTC Test to the Network; the premises (or part of any premises) in which is required to install any FTTC Equipment, if the acquires a - FTTC Test variant; any content or applications, including IP transit, Internet gateway connection, any Equipment, BGP routing, soft switching infrastructure and all international connectivity; any other end user equipment, such as personal computers and network attached storage solutions; direct access to, or direct use of, s core systems or the functionality of s core systems; building entry rights or physical access to any facility in which the FTTC Test is or available, including for the purposes of establishing connectivity between the Network and the FTTC Test (other than access to the National Test Facility, where acquires the - variant of the FTTC Test ); or any connectivity between the B2B Gateway and the FTTC Test B2B Gateway. (d) In respect of each facility from which elects to acquire a FTTC Test : (i) if the facility is owned or operated by a third party, must arrange building entry rights and physical access to that facility directly with the facility owner (as notified by from time to time); 10

11 Part B: General Conditions of Supply (ii) (iii) if the facility is a Type 1 Facility, must acquire relevant Service Elements of the Facilities Access Service from to enter and access the facility, and Charges may apply as set out in the Facilities Access Service Price List; and if the facility is the National Test Facility, must choose a connectivity method, connect to the National Test Facility and obtain physical access to the National Test Facility (as applicable) in accordance with section of the WBA Operations Manual. 11