Public-Beta Changelog COMmander 6000 (R/RX) COMpact 5x00 (R) COMpact 4000 Version 7.2A-022

Transcription

1 Table of Contents 1 Introduction Improvements CLIP amplification for Belgium set to 25 db Increase of the security measures by additional http header Bug fixes Fallback after fallback time terminated the exchange line connection during a group call Exporting the configuration from the simulation server left out passwords Number of DTMF digits, which could be dialled during a call, was limited Switching of a manual relay via API-request was not possible Fixed Mobile Convergence (FMC) was not executed when the same phone number had been used for multiple subscribers as the phone number for multi-path call forwarding Answering Type msgleng was incorrect with API-calling of app_vmf_msg_list LDAP Attribute mobile was altered into a telephone number (user defined) during a CSV-Import Problems with UTF-8 coding during the online name search Entries containing 08602unavailable occurred on the call data list for calls with external subscribers Incoming calls from Vodafone to a Telekom SIP-trunk intermittently resulted in terminating the call On some ISDN gateways, the local area code was placed and dialled before the complete phone number 'Call deflection' not considered for subscriber call forwarding Access to group properties via ARA was not stable PBX sent faulty audio signal to the provider easybell CLIP no screening phone number for additional number was not stored Programming sequence for Follow-me did not function if subscriber had direct exchange line COMpact NET module did not renew its IP address if it was assigned by DHCP Call distribution to a fallback number incorrect with a SIP trunk Sporadic restart of the PBX with targeted exchange line access with ##96 MSN * destination number "Dynamic" was missing in the selection options for "Busy-on-Busy" Templates with recognition "uk" incorrectly sorted... 5 Page 1 of 6

2 3.22 CLIP expert settings faulty for Great Britain... 6 Page 2 of 6

3 1 Introduction Besides new functions, this document describes altered functions and bug fixes. The information provided is valid for the following devices: COMmander 6000 / 6000R / 6000RX COMpact 5500R COMpact 5200 / 5200R COMpact 5000 / 5000R COMpact 4000 Note: After an update, please empty the cache of your web browser. 2 Improvements You find further information about functions or configuration in the Advanced Information/online help. Improvements of this version are described in this chapter. 2.1 CLIP amplification for Belgium set to 25 db In the expert settings of an analogue exchange line for Belgium, the CLIP amplification is now preset on 25 db. 2.2 Increase of the security measures by additional http header In the current web browsers the security has been increased by the activation of new security mechanisms. 3 Bug fixes You find detailed information about functions or configuration in the Advanced Information or the Online Help of the respective device. 3.1 Fallback after fallback time terminated the exchange line connection during a group call The response time behaviour of group calls from external callers was enhanced. This shall avoid further unexpected termination of connections. 3.2 Exporting the configuration from the simulation server left out passwords Configurations containing passwords, which had been uploaded to the simulation server, will be exported including the passwords. Page 3 of 6

4 3.3 Number of DTMF digits, which could be dialled during a call, was limited The number of DTMF digits, which could be dialled during a call, is not limited any longer 3.4 Switching of a manual relay via API-request was not possible It is now possible to switch a manual relay with switching duration via an API request. 3.5 Fixed Mobile Convergence (FMC) was not executed when the same phone number had been used for multiple subscribers as the phone number for multi-path call forwarding The same phone number can be assigned to multiple contacts as the phone number for multi-path call forwarding. FMC calls can be executed. 3.6 Answering Type msgleng was incorrect with API-calling of app_vmf_msg_list When executing the API function call app_vmf_msg_list, the wrong answer type msgleng was delivered. The answer type is corrected to msglength. 3.7 LDAP Attribute mobile was altered into a telephone number (user defined) during a CSV-Import During the CSV-import of contact data, the phone number type mobile will be loaded correctly. 3.8 Problems with UTF-8 coding during the online name search During the online name search problems occurred as regards UTF-8 coding. German special characters such as ä, ö, ü, ß are now displayed correctly. 3.9 Entries containing 08602unavailable occurred on the call data list for calls with external subscribers Entries containing the phone number 08602unavailable do not occur on the call data list for calls with external subscribers 3.10 Incoming calls from Vodafone to a Telekom SIP-trunk intermittently resulted in terminating the call Incoming calls from Vodafone to a Telekom SIP-trunk are possible without resulting in terminated calls On some ISDN gateways, the local area code was placed and dialled before the complete phone number The local area code is now used at the correct place of the phone numbers. Correct dialling is ensured. Page 4 of 6

5 3.12 'Call deflection' not considered for subscriber call forwarding For a VoIP PTP connection with 'Call deflection', subscriber call forwarding is now also redirected in the provider so that the PBX channels remain free Access to group properties via ARA was not stable After accessing the group properties via Auerswald Remote Access (ARA), there is no longer a "frozen" status message PBX sent faulty audio signal to the provider easybell With a call from the D1 mobile network via a COMpact 5000 to the provider easybell, now no defective audio signal is sent CLIP no screening phone number for additional number was not stored Under Public switched tel. networks -> Voice over IP -> Additional numbers an additional CLIP no screening number can be created Programming sequence for Follow-me did not function if subscriber had direct exchange line The programming sequence ## 8 * 19 1 Subscriber/group number # does now also function when the corresponding subscriber has a direct exchange line COMpact NET module did not renew its IP address if it was assigned by DHCP The COMpact NET module does now consider the lease time for IP addresses by a DHCP server Call distribution to a fallback number incorrect with a SIP trunk If only the head number is called in a SIP trunk, the fallback number is now called in case of a fallback Sporadic restart of the PBX with targeted exchange line access with ##96 MSN * destination number There is no longer a sporadic restart of the PBX when the exchange line access is assigned with ##96 MSN * destination number "Dynamic" was missing in the selection options for "Busy-on-Busy" Now, in the group reachability for Busy-on-Busy, "dynamic" can be selected again Templates with recognition "uk" incorrectly sorted In the selection "Import provider" the templates with recognition "uk" are now displayed under the country Great Britain. Page 5 of 6

6 3.22 CLIP expert settings faulty for Great Britain In the expert settings of an analogue exchange line, now, "CLIP without signalling, before the first ring" is set for Great Britain as CLIP subversion as default. Page 6 of 6