Chapter 2 Reading Organizer
|
|
- Norah Golden
- 6 years ago
- Views:
Transcription
1 Name Date Chapter 2 Reading Organizer After completion of this chapter, you should be able to: 2.1 Interpret network documentation. Describe the equipment in the enterprise Network Operations Center. Describe the POINT-of-Presence for service delivery. Identify security considerations and equipment at the enterprise edg Identify router and switch hardware characteristics and use router CLI configuration and verification commands. 1. Explain the following terms. Physical Topology Logical Topology - Control Plane 1
2 2. Explain in detail what a Business Continuity Plan is: 3. What type of IT support may be included with a Business Continuity Plan? 4. Explain in detail what a Business Security Plan is: 5. List the IT security plan possible policies: 6. Explain in detail what a Network Maintenance Plan is: 2
3 6. List what the maintenance plan can contain: 8. Explain in detail what a service Level Agreement is: 9. List what service level agreements can include: 3
4 Explain what a Network Operations Center (NOC) does. 12. A server farm is frequently considered a single resource but, in fact, provides two functions. These are: 13. According to the IEEE how long can a Fast Ethernet unshielded twisted pair (UTP) cable run be? 14. Explain in detail what an intermediate distribution facility (IDF) is and does. 4
5 15. Explain in detail what a main distribution facility (MDF) is and does. 16. What is typically contained in an MDF? 17. What is typically contained in an MDF? 5
6 18. Label the appropriate locations as either an MDF or IDF, and identify the appropriate cables that connect them as either Fiber Cable or UTP Explain in detail what the Point-of-Presence in your network is. 20. Explain in detail what the demarcation point is. 6
7 21. All traffic in or out of the organization goes through the edg Edge devices must be configured to defend against attacks and provide filtering. What is this filtering based on? 22. An organization can deploy a firewall, and security appliances at the edg What are two devices used to protect networks at this point? 23. External network administrators require access for internal maintenance and software installation. What mechanisms allow remote workers access to internal resources? One important device in the Distribution Layer of an enterprise network is a router. Why? 7
8 25. Explain in detail the critical role routers play in networking. 26. Explain what out-of-band management is. 27. What is required to use out-of-band management? 28. Explain what in-band-management is. 29. What does configuration using in-band management require? 8
9 30. What can be learned by using the show version command? f. g. 31. The show ip route command displays routing table information which includes: f. g. h. 32. What information is learned by using the show ip interface brief command? 9
10 33. Draw a line between the term and the correct definition. Complete Packet Tracer Activity Instructor Initials 34. Which layer generally has the most switches? 35. Explain what information can you learn about a switch using the show port-security command? 36. Explain what information can you learn about a switch using the show mac-address-table command? Complete Packet Tracer Activity Instructor Initials Complete Lab Activity
Objective: Select the appropriate media, cables, ports, and connectors to connect switches to other network devices and hosts
Curriculum Name CCENT Study Guide 2 Section 9.2 Troubleshooting Layer 1 and Layer 2 Issues As you work through this troubleshooting section, you can review the material necessary to prepare you to obtain
More informationMobile MOUSe ROUTING AND SWITCHING FUNDAMENTALS ONLINE COURSE OUTLINE
Mobile MOUSe ROUTING AND SWITCHING FUNDAMENTALS ONLINE COURSE OUTLINE COURSE TITLE ROUTING AND SWITCHING FUNDAMENTALS COURSE DURATION 16 Hour(s) of Self-Paced Interactive Training COURSE OVERVIEW In the
More informationStudy Guide. Module Two
Module Two Study Guide Study Guide Contents Part One -- Textbook Questions Part Two -- Assignment Questions Part Three -- Vocabulary Chapter 4 Data Link Layer What is the function of the data link layer?
More informationLab 8.4.2: Show IP Route Challenge Lab
Addressing Table Device Interface IP Address Subnet Mask R1 R2 R3 R4 R5 Learning Objectives Upon completion of this lab, you will be able to: Determine network topology based on the outputs from the show
More informationICND1 v2.0 Interconnecting Cisco Networking Devices Part 1 CCENT & Part of CCNA Rout/Switch
ICND1 v2.0 Interconnecting Cisco Networking Devices Part 1 CCENT & Part of CCNA Rout/Switch Course Length: 5 days Course Delivery: Traditional Classroom Online Live Course Overview Interconnecting Cisco
More informationPacket Tracer - Connect a Router to a LAN (Instructor Version)
(Instructor Version) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Topology Addressing Table Device Interface IP Address Subnet Mask Default
More informationEECS Introduction to Computer Networking. Local Area Networks / Ethernet. Hub
Ethernet -- Topology: Ethernet MAC: Hub Single collision domain Hub Hub Relay Collision! After a collision, stop for a random time wait for a random time, then try again. (Walrand/Varaiya slides) - computers
More informationInterconnecting Cisco Network Devices Part 1 v2.0 (ICND 1)
Interconnecting Cisco Network Devices Part 1 v2.0 (ICND 1) COURSE OVERVIEW: Interconnecting Cisco Networking Devices, Part 1 (ICND1) v2.0 is a five-day, instructor-led training course that teaches learners
More informationChapter 2: Configure a Network Operating System. Every computer requires an operating system to function, including computerbased
2.0.1.1 Chapter 2: Configure a Network Operating System Every computer requires an operating system to function, including computerbased network devices such as switches, routers, access points, and firewalls.
More informationChapter 3 Reading Organizer
Name Date Chapter 3 Reading Organizer After completion of this chapter, you should be able to: 3.1 Compare the types of switches used in an enterprise network. Explain how Spanning Tree Protocol prevents
More informationDriving Network Visibility
Flowmon Price List EUR Driving Network Visibility Flowmon Hardware Appliances... 2 Flowmon Virtual Appliances... 3 Flowmon Cloud... 3 Flowmon ADS Anomaly Detection System... 4 Flowmon DDoS Defender...
More informationThis course prepares candidates for the CompTIA Network+ examination (2018 Objectives) N
CompTIA Network+ (Exam N10-007) Course Description: CompTIA Network+ is the first certification IT professionals specializing in network administration and support should earn. Network+ is aimed at IT
More informationAPPENDIX B GLOSSARY. ADAAG: Americans with Disabilities Act Accessibility Guidelines.
APPENDIX B GLOSSARY ADAAG: Americans with Disabilities Act Accessibility Guidelines. AOR: Assumption of Responsibility. AP (Access Provider): The operator of any facility that is used to convey telecommunications
More informationCOURSE PROJECT SEM ATTENTION ALL ADVANCED DIPLOMA & BACHELOR STUDENTS
COURSE PROJECT SEM 2 2014 2015 ATTENTION ALL ADVANCED DIPLOMA & BACHELOR STUDENTS The students who have pre registered for Networking Course Project are required to submit your project proposal. The titles
More informationConnecting to the Network
Connecting to the Network Networking for Home and Small Businesses Chapter 3 1 Objectives Explain the concept of networking and the benefits of networks. Explain the concept of communication protocols.
More informationInterconnecting Cisco Networking Devices Part 1 ICND1
Interconnecting Cisco Networking Devices Part 1 ICND1 Course Length: 5 days Course Delivery: Traditional Classroom Online Live Course Overview Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0
More informationCables and Connectors
Module 2 Cables and Connectors Twisted Pair Two wires that carry the data signals (one conductor carries a positive signal; one carries a negative signal). Two wires are twisted to reduce the effects of
More informationThe Threaded Case Study
Cisco Networking Academy Program Semesters III and IV Instructor: Chris Widmer The Threaded Case Study OBJECTIVE The purpose of the Threaded Case Study is to allow you to apply the knowledge that you have
More informationCCENT Study Guide. Chapter 2 Ethernet Networking and Data Encapsulation
CCENT Study Guide Chapter 2 Ethernet Networking and Data Encapsulation Chapter 2 Objectives The CCENT Topics Covered in this chapter include: Network Fundamentals 1.6 Select the appropriate cabling type
More informationUse NAT to Hide the Real IP Address of CTC to Establish a Session with ONS 15454
Use NAT to Hide the Real IP Address of CTC to Establish a Session with ONS 15454 Document ID: 65122 Contents Introduction Prerequisites Requirements Components Used Conventions Background Information Topology
More informationScope and Sequence: CCNA Discovery v4.0
Scope and Sequence: CCNA Discovery v4.0 Last Updated August 30, 2007 The course objectives and outline for the final two CCNA Discovery courses, Introducing Routing and Switching in the Enterprise and
More informationScope and Sequence: CCNA Discovery
Scope and Sequence: CCNA Discovery Last updated June 19, 2009 Target Audience The Cisco CCNA Discovery curriculum is primarily designed for Cisco Networking Academy students who are seeking entry-level
More informationCCNA Exploration Network Fundamentals
CCNA Exploration 4.0 1. Network Fundamentals The goal of this course is to introduce you to fundamental networking concepts and technologies. These online course materials will assist you in developing
More informationDeploying and Administering Cisco s Digital Network Architecture (DNA) and Intelligent WAN (IWAN) (DNADDC)
Deploying and Administering Cisco s Digital Network Architecture (DNA) and Intelligent WAN (IWAN) (DNADDC) COURSE OVERVIEW: Deploying and Administering Cisco s Digital Network Architecture (DNA) and Intelligent
More informationAny individual involved in implementation and verification of routing protocols in the enterprise networks
IMPLEMENTING CISCO IP ROUTING Information Length: 5 Days Courseware : Course code: Delivery Type Included CIS_ROUTE Classroom Description Implementing Cisco IP Routing (ROUTE) v1.0 is a five-day course
More informationCisco 1: Networking Fundamentals
Western Technical College 10150110 Cisco 1: Networking Fundamentals Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 3.00 Total Hours 90.00 This course
More informationSecond Semester Examination Higher National Diploma in Information Technology First Year
Q1). Second Semester Examination -2011 Higher National Diploma in Information Technology First Year IT2004 - Introduction to Data Communication and Networks No of pages: 17 Marking Scheme a) Define Analog
More informationScope and Sequence: CCNA Discovery
Scope and Sequence: CCNA Discovery Last updated April 22, 2008 Target Audience CCNA Discovery is primarily designed for Cisco Networking Academy students who are looking for career-oriented, information
More informationThe Features and Uses of Computer Networking. Unit 11 Task 1
The Features and Uses of Computer Networking Unit 11 Task 1 Features Office Network Peer to peer A peer to peer network is mostly used in homes or small businesses. The network consists of two or more
More informationExample: Configuring DHCP Snooping and DAI to Protect the Switch from ARP Spoofing Attacks
Example: Configuring DHCP Snooping and DAI to Protect the Switch from ARP Spoofing Attacks In an ARP spoofing attack, the attacker associates its own MAC address with the IP address of a network device
More informationHands-On VPLS: Virtual Private LAN Service
Hands-On Course Description Carriers have offered connectivity services based on traditional TDM, Frame Relay and ATM for many years. However, the cost of operating separate networks to provide each of
More informationConfiguring Firewall Filters (J-Web Procedure)
Configuring Firewall Filters (J-Web Procedure) You configure firewall filters on EX Series switches to control traffic that enters ports on the switch or enters and exits VLANs on the network and Layer
More informationCompTIA Network+ Study Guide Table of Contents
CompTIA Network+ Study Guide Table of Contents Course Introduction Table of Contents Getting Started About This Course About CompTIA Certifications Module 1 / Local Area Networks Module 1 / Unit 1 Topologies
More informationTestOut Network Pro English 4.1.x LESSON PLAN. Modified
TestOut Network Pro English 4.1.x LESSON PLAN Modified 2017-07-05 2 Table of Contents Introduction Section 0.1: Using the Simulator... 5 Networking Basics Section 1.1: Networking Overview... 6 Section
More informationSection 1.1: Networking Overview
Section 1.1: Networking Overview This section provides an introduction to networking. Students will become familiar with the following aspects of a network: Components of a network o Computers o Transmission
More informationUniversity of Human Development College of Science and Technology Department of Information Technology. Data Communication and Networking
University of Human Development College of Science and Technology Department of Information Technology Data Communication and Networking 1 Course Administration and Policies (cont.) Studying slides is
More informationIntroducing Cisco Data Center Networking Course DCICN v1.0; 4 Days, Instructor-led
Introducing Cisco Data Center Networking Course DCICN v1.0; 4 Days, Instructor-led Course Description DCICN will introduce the students to the three primary technologies that are used in the Cisco Data
More informationFundamentals of Windows Server 2008 Network and Applications Infrastructure
COURSE OVERVIEW This five-day instructor-led course introduces students to network and applications infrastructure concepts and configurations provided by Window Server 2008. Students will be able to acquire
More informationICND2. Rapid Spanning-Tree Protocol. These exercises utilize build on the previous ones used in the last class sessions.
ICND2 Rapid Spanning-Tree Protocol TOPOLOGY 5x2950 (Layer 2 Switches) These exercises utilize build on the previous ones used in the last class sessions. Lab Exercise 1: Rapid Spanning-Tree Configuration
More information2) A is any device connected to a network such as a computer, printer, or game console. A) packet B) node C) NOS D) NIC
Technology In Action, Complete, 14e (Evans et al.) Chapter 7 Networking: Connecting Computing Devices 1) A computer is two or more computers connected using software and hardware so that they can communicate
More informationGet the skills to maintain your networks and to diagnose and resolve network problems quickly and effectively.
Cisco CCNP - HD Telepresence TSHOOT: Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) 2.0 Get the skills to maintain your networks and to diagnose and resolve network problems quickly and effectively.
More informationCisco EtherSwitch Modules for the Integrated Services Routers Routers
Cisco EtherSwitch Modules for the Integrated Services Routers Routers 16- and 36-Port 10/100 Ethernet Modules for Cisco 2600/2800/2900/3600/3700/3800/3900 Series Routers Figure 1. Cisco 16-Port and 36-Port
More informationRouter Router Microprocessor controlled traffic direction home router DSL modem Computer Enterprise routers Core routers
Router Router is a Microprocessor controlled device that forwards data packets across the computer network. It is used to connect two or more data lines from different net works. The function of the router
More informationComputer Networks. Week 04 Media and Devices. College of Information Science and Engineering Ritsumeikan University
Computer Networks Week 04 Media and Devices College of Information Science and Engineering Ritsumeikan University Network Media and Devices l When you build a network, the network hardware may be used
More informationCCNA Exploration Network Fundamentals. Chapter 10 Planning and Cabling Networks
CCNA Exploration Network Fundamentals Chapter 10 Planning and Cabling Networks Updated: 15/07/2008 1 10.0.1 Introduction 2 10.0.1 Introduction The following have been covered in previous chapters: considered
More informationChapter Topics Part 1. Network Definitions. Behind the Scenes: Networking and Security
Chapter Topics Part 1 Behind the Scenes: Networking and Security CS10001 Computer Literacy Business Networks Network Advantages Client/Server Networks Network Classifications Servers Toplogies Chapter
More informationCourse Outline. Networking Essentials, Fifth Edition Pearson ucertify. Networking Essentials, Fifth Edition Pearson ucertify
Course Outline Networking Essentials, Fifth Edition Pearson ucertify 07 Apr 2019 Contents 1. Course Objective 2. Pre-Assessment 3. Exercises, Quizzes, Flashcards & Glossary Number of Questions 4. Expert
More informationARP Inspection and the MAC Address Table for Transparent Firewall Mode
ARP Inspection and the MAC Address Table for Transparent Firewall Mode This chapter describes how to customize the MAC address table and configure ARP Inspection for bridge groups. About ARP Inspection
More informationNetwork Configuration Example
Network Configuration Example Configuring a Routing Matrix with a TX Matrix Plus Router in Mixed Mode Modified: 2016-12-13 Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, California 94089 USA 408-745-2000
More information"Charting the Course... Interconnecting Cisco Networking Devices Accelerated 3.0 (CCNAX) Course Summary
Description Course Summary The Cisco CCNA curriculum includes a third course, Interconnecting Cisco Networking Devices: Accelerated (CCNAX), consisting of Interconnecting Cisco Networking Devices, Part
More informationCourse Outline. Networking Essentials, Fifth Edition Pearson ucertify Labs.
Course Outline Networking Essentials, Fifth Edition Pearson ucertify 22 Apr 2019 Contents 1. Course Objective 2. Expert Instructor-Led Training 3. ADA Compliant & JAWS Compatible Platform 4. State of the
More informationChapter 7 Hardware Overview
Chapter 7 Hardware Overview This chapter provides a hardware overview of the HP 9308M, HP 930M, and HP 6308M-SX routing switches and the HP 6208M-SX switch. For information about specific hardware standards
More informationSpanning Tree Protocol(STP)
Introduction Spanning Tree Protocol (STP) is a Layer 2 protocol that runs on bridges and switches. The specification for STP is IEEE 802.1D. The main purpose of STP is to ensure that you do not create
More informationCISCO QUAD Cisco CCENT/CCNA/CCDA/CCNA Security (QUAD)
Our Learning Exclusive Custom exam prep software and materials Exam delivery in classroom with 98% success Course specific thinqtank Learning publications to promote fun exciting learning Extended hours
More informationFortiDDoS Deployment Guide for Cloud Signaling with Verisign OpenHybrid
FortiDDoS Deployment Guide for Cloud Signaling with Verisign OpenHybrid FORTINET DOCUMENT LIBRARY http://docs.fortinet.com FORTINET VIDEO GUIDE http://video.fortinet.com FORTINET BLOG https://blog.fortinet.com
More information1. What type of network cable is used between a terminal and a console port? cross-over straight-through rollover patch cable 2.
1. What type of network cable is used between a terminal and a console port? cross-over straight-through rollover patch cable 2. Refer to the exhibit. A network administrator has decided to use packet
More informationFrequently Asked Questions (Dialogic BorderNet 500 Gateways)
Frequently Asked Questions (Dialogic BorderNet 500 Gateways) Q: What is a Dialogic BorderNet 500 Gateway, and what are its main functions? A: A Dialogic BorderNet 500 Gateway consists of a full featured
More informationNetwork Service Assurance
Service Assurance Embedded 'Always-On' Ethernet Devices for Circuit 'Turn-Up' Testing & In-Service Assurance for Layer- 2 and Layer-3 infrastructures Ethernet (L-2) - Typical Scenario HQ & Operations Centre
More informationHigh Availability and Redundant Operation
This chapter describes the high availability and redundancy features of the Cisco ASR 9000 Series Routers. Features Overview, page 1 High Availability Router Operations, page 1 Power Supply Redundancy,
More informationModule Three SG. Study Guide. Exam Three Content Areas. Module Three. Chapter Seven, Backbone Networks
SG Exam Three will draw questions from multiple content areas including: our networking textbook, our wireless electronic textbook, our assignments and our class lectures. The purpose of this guide is
More informationIC32E - Pre-Instructional Survey
Name: Date: 1. What is the primary function of a firewall? a. Block all internet traffic b. Detect network intrusions c. Filter network traffic d. Authenticate users 2. A system that monitors traffic into
More informationChapter 9. Ethernet. Part II
Chapter 9 Ethernet Part II CCNA1-1 Chapter 9-2 Note for Instructors These presentations are the result of a collaboration among the instructors at St. Clair College in Windsor, Ontario. Thanks must go
More informationINTERNET TEACHING LAB: Interior Gateway Protocol (IGP) LAB
INTERNET TEACHING LAB: Interior Gateway Protocol (IGP) LAB Overview In this lab, we will explore some common interior gateway protocols - RIP version 1 (Routing Information Protocol) - OSPF (Open Shortest
More informationCheck Point 4800 with Gigamon Inline Deployment Guide
Check Point 4800 with Gigamon Inline Deployment Guide COPYRIGHT Copyright 2016 Gigamon. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval
More informationChapter 10: Planning and Cabling Networks
Chapter 10: Planning and Cabling Networks Before using an IP phone, accessing instant messaging, or conducting any number of other interactions over a data network, we must connect end devices and intermediary
More informationExample: Configuring DHCP Snooping, DAI, and MAC Limiting on an EX Series Switch with Access to a DHCP Server Through a Second Switch
Example: Configuring DHCP Snooping, DAI, and MAC Limiting on an EX Series Switch with Access to a DHCP Server Through a Second Switch Requirements You can configure DHCP snooping, dynamic ARP inspection
More informationFigure Untagged and 802.1Q-Tagged Ethernet frames
38. 802.1Q VLAN Virtual LANs (VLANs) are logical, independent workgroups within a network. These workgroups communicate as if they had a physical connection to the network. However, VLANs are not limited
More informationSWITCH Implementing Cisco IP Switched Networks
Hands-On SWITCH Implementing Cisco IP Switched Networks CCNP Course 2 Course Description Revised CCNP Curriculum and Exams Cisco has redesigned the CCNP courses and exams to reflect the evolving job tasks
More informationTechnology in Action. Chapter 12 Behind the Scenes: Networking and Security. Copyright 2010 Pearson Education, Inc. Publishing as Prentice Hall
Technology in Action Chapter 12 Behind the Scenes: Networking and Security 1 Networking Advantages Networks Increase productivity Enable the sharing of hardware resources Facilitate knowledge sharing Enable
More informationStudy Guide. Module Three
Exam Three will draw questions four content areas: our textbook, our assignments, the Rackspace Web Hosting Tutorial, and our class lectures. The purpose of this guide is to help you focus your exam preparations.
More informationIntroduction. Goal of This Book. Audience for This Book
xxvi Networking for Home and Small Businesses, CCNA Discovery Learning Guide Cisco Networking Academy is a comprehensive e-learning program that delivers information technology skills to students around
More informationLab#01 - Introduction to Packet Tracer
Lab#01 - Introduction to Packet Tracer What is Packet Tracer? Packet Tracer is a protocol simulator developed by Dennis Frezzo and his team at Cisco Systems. Packet Tracer (PT) is a powerful and dynamic
More informationLANs do not normally operate in isolation. They are connected to one another or to the Internet. To connect LANs, connecting devices are needed.
LAN interconnecting devices INTRODUCTION LANs do not normally operate in isolation. They are connected to one another or to the Internet. To connect LANs, connecting devices are needed. Connecting devices
More informationDevice Interface IP Address Subnet Mask R1 G0/ N/A
CSNB214 Packet Tracer Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway Objectives R1 G0/0 192.168.20.1 255.255.255.0 N/A S1 VLAN 10 S2 VLAN 10 G0/1 192.168.10.1 255.255.255.0
More informationHow to Configure ASA 5500-X Series Firewall to send logs to EventTracker. EventTracker
How to Configure ASA 5500-X Series Firewall to send logs to EventTracker EventTracker Publication Date: September 14, 2018 Abstract This guide helps you in configuring ASA 5500-X Series Firewall to send
More informationLogical Network Design (Part II)
Logical Network Design (Part II) DCS COMSATS Institute of Information Technology Rab Nawaz Jadoon Assistant Professor COMSATS IIT, Abbottabad Pakistan Telecommunication Network Design (TND) Possible (Part
More informationIntroduction p. 1 Self-Assessment p. 9 Networking Fundamentals p. 17 Introduction p. 18 Components and Terms p. 18 Topologies p. 18 LAN Technologies
Introduction p. 1 Self-Assessment p. 9 Networking Fundamentals p. 17 Introduction p. 18 Components and Terms p. 18 Topologies p. 18 LAN Technologies p. 19 Ethernet p. 19 WAN Technologies p. 21 Dedicated
More informationNetwork Security. Dr. Ihsan Ullah. Department of Computer Science & IT University of Balochistan, Quetta Pakistan. June 18, 2015
Network Security Dr. Ihsan Ullah Department of Computer Science & IT University of Balochistan, Quetta Pakistan June 18, 2015 1 / 19 ARP (Address resolution protocol) poisoning ARP is used to resolve 32-bit
More informationImplementing and Configuring Cisco SDWAN (ICSDWAN-CT)
Implementing and Configuring Cisco SDWAN (ICSDWAN-CT) COURSE OVERVIEW: This course discusses the Cisco s SDWAN solution using Viptela. In this class, students will configure and manage the Viptela Fabric.
More informationChapter 4: Network Access
4.0.1.1 Chapter 4: Network Access To support our communication, the OSI model divides the functions of a data network into layers. Each layer works with the layers above and below to transmit data. 4.0.1.2
More informationInterconnecting Cisco Networking Devices, Part 1
ICND1 Interconnecting Cisco Networking Devices, Part 1 Volume 1 Version 2.0 Student Guide Part Number: 97-3242-01 Americas Headquarters Cisco Systems, Inc. San Jose, CA Asia Pacific Headquarters Cisco
More informationFibre Optic PTP Broadband Solution (FTTx)
Fibre Optic PTP Broadband Solution (FTTx) March 2015 TNS COMMS Contents 1. High Level Architecture 2. Equipment being supplied by TNS 3. VLAN Design 4. Service Provisioning 5. Management 6. IP Addressing
More information"Charting the Course... TSHOOT Troubleshooting and Maintaining Cisco IP Networks Course Summary
Course Summary Description This course is designed to help network professionals improve the skills and knowledge that they need to maintain their network and to diagnose and resolve network problems quickly
More informationTestOut Network Pro - English 5.0.x COURSE OUTLINE. Modified
TestOut Network Pro - English 5.0.x COURSE OUTLINE Modified 2018-03-06 TestOut Network Pro Outline - English 5.0.x Videos: 130 (17:10:31) Demonstrations: 78 (8:46:15) Simulations: 88 Fact Sheets: 136 Exams:
More informationCommunication Networks
Communication Networks Nicholas Honeth (nicholash@ics.kth.se) Contents of the series Lecture 10 - Recap of the networks we ve seen so far - OSI model - Circuit and packet switching - Physical media Lecture
More informationCisco IOS Inline Intrusion Prevention System (IPS)
Cisco IOS Inline Intrusion Prevention System (IPS) This data sheet provides an overview of the Cisco IOS Intrusion Prevention System (IPS) solution. Product Overview In today s business environment, network
More informationPearson: Networking Essentials, 4/E (Course & Lab) Course Outline. Pearson: Networking Essentials, 4/E (Course & Lab) 18 Oct
Course Outline Pearson: Networking Essentials, 4/E (Course & Lab) 18 Oct 2018 Contents 1. Course Objective 2. Pre-Assessment 3. Exercises, Quizzes, Flashcards & Glossary Number of Questions 4. Expert Instructor-Led
More informationCS-435 spring semester Network Technology & Programming Laboratory. Stefanos Papadakis & Manolis Spanakis
CS-435 spring semester 206 Network Technology & Programming Laboratory University of Crete Computer Science Department Stefanos Papadakis & Manolis Spanakis CS-435 Lecture #2 preview: Data Communications
More informationCOPYRIGHTED MATERIAL. Con t e n t s. Chapter 1 Introduction to Networking 1. Chapter 2 Overview of Networking Components 21.
Con t e n t s Introduction xix Chapter 1 Introduction to Networking 1 Comparing Logical and Physical Networks.... 1 Networking Home Computers........................................... 2 Networking Small
More informationCourse Outline. Pearson: Networking Essentials, 4/E (Course & Lab)
Course Outline Pearson: Networking Essentials, 4/E (Course & Lab) 21 Dec 2017 Contents 1. Course Objective 2. Pre-Assessment 3. Exercises, Quizzes, Flashcards & Glossary Number of Questions 4. Expert Instructor-Led
More informationImplementing and Administering Security in a Microsoft Windows 2000 Network Course 2820 Five days Instructor-led Published: February 17, 2004
Implementing and Administering Security in a Microsoft Windows 2000 Network Course 2820 Five days Instructor-led Published: February 17, 2004 Introduction This five-day instructor-led course provides students
More informationArea Covered is small Area covered is large. Data transfer rate is high Data transfer rate is low
Chapter 15 Networking Concepts 1. Define networking. It is the interconnection of independent computing devices for sharing of information over shared medium. 2. What is the need for networking? / What
More informationARP Inspection and the MAC Address Table
This chapter describes how to customize the MAC address table and configure ARP Inspection for bridge groups. About, page 1 Default Settings, page 2 Guidelines for, page 2 Configure ARP Inspection and
More informationOverview. About the Catalyst 2820 and Catalyst 1900 Switches CHAPTER
CHAPTER 1 Overview This chapter describes the Enterprise Edition software features for Catalyst 2820 and Catalyst 1900 switches. It also describes the feature default settings and shows the management
More informationUnderstanding Networking Fundamentals
Understanding Networking Fundamentals Training Details Training Time : 5 Days Capacity : 12 Prerequisites : There are no prerequisites for this course. About Training About Training A strong foundation
More informationPT Activity: Configuring a Zone-Based Policy Firewall (ZPF)
PT Activity: Configuring a Zone-Based Policy Firewall (ZPF) Instructor Version Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Default Gateway R1 R2 R3 Fa0/1 192.168.1.1 255.255.255.0
More informationOHLONE COLLEGE Ohlone Community College District OFFICIAL COURSE OUTLINE
OHLONE COLLEGE Ohlone Community College District OFFICIAL COURSE OUTLINE I. Description of Course: 1. Department/Course: CNET - 155A 2. Title: Introduction to Networks (CCNA1) 3. Cross Reference: 4. Units:
More informationEECS 228a Lecture 1 Overview: Networks. Jean Walrand
EECS 228a Lecture 1 Overview: Networks Jean Walrand www.eecs.berkeley.edu/~wlr Fall 2002 Course Information Instructor: Jean Walrand n Office Hours: M-Tu 1:00-2:00 Time/Place: MW 2:00-3:30 in 285 Cory
More informationNew Product: Cisco Catalyst 2950 Series Fast Ethernet Desktop Switches
New Product: Cisco Catalyst 2950 Series Fast Ethernet Desktop Switches Product Overview The Cisco Catalyst 2950 Series of fixed configuration, wire-speed Fast Ethernet desktop switches delivers premium
More informationExpert Reference Series of White Papers. Securing Layer 2
Expert Reference Series of White Papers Securing Layer 2 1-800-COURSES www.globalknowledge.com Securing Layer 2 Carol Kavalla, Global Knowledge Instructor Introduction For many years network administrators
More information