RADIATION TEST REPORT

EMIF06-HMC02F2. 6-line IPAD, EMI filter including ESD protection. Description. Features. Applications. Complies with the following standards

6-line IPAD, EMI filter including ESD protection Description Datasheet - production data Features 6 lines low-pass-filter High efficiency in EMI filtering Very low PCB space consuming: < 4 mm² Lead-free

EMIF06-HSD04F3. 6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection. Features. Application.

6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection Features Datasheet production data Figure 1. Pin configuration (bump side) Very low line capacitance to compensate long

RDHA701FP10A8QK. Neutron and Total Ionizing Dose Test Report. April 2009

Neutron and Total Ionizing Dose Test Report International Rectifier currently does not have a DSCC approved Radiation Hardness Assurance Program for MIL-PRF-38534. 205 Crawford St, Leominster, Ma 01453

EMIF06-USD14F3. 6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection. Applications. Description. Features.

6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection Applications Datasheet production data Flip Chip (15 bumps) Consumer and computer electronics with micro-sd card such

BIPOLAR ANALOG INTEGRATED CIRCUIT

DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT µ PC16 2.5 V HIGH PRECISION REFEREE VOLTAGE CIRCUIT DESCRIPTION The µ PC16 are high accuracy and low drift voltage references of 2.5 V output voltage. This

NOR- FLASH (16-bit) Parallel NAND (8-bit) Buffers (32-bit databus)

LPC2478-32 OEM Board Feature Highlights The LPC2478-32 OEM Board provides a quick and easy solution for implementing a high-performance ARM7TDMI based design around the LPC2478 from NXP. Build around NXP's

TruVision TVC-SD Series Smoke Detector Camera Installation Manual

TruVision TVC-SD Series Smoke Detector Camera Installation Manual Copyright Disclaimer Trademarks and patents Intended use FCC compliance Manufacturer 2010 GE Security, Inc. This document may not be copied

Ripple & Noise (max) (See Note 2) 5V output: 100mVp-p; 12V - 27V outputs: 150mVp-p; 48V output: 200mVp-p

FEATURES 3 Year Warranty 100% Full Load Burn-In Tested Universal AC Input / Full Range Built-In Remote Sense Function Built-In Remote ON/OFF Control Current Sharing up to 2000W (3+1) Forced Air Cooling

TSL250R, TSL251R, TSL252R

TSL250R, TSL251R, TSL252R Light-to-Voltage Optical Sensors General Description The TSL250R, TSL251R, and TSL252R are light-to-voltage optical sensors, each combining a photodiode and a transimpedance amplifier

I/O SIGNAL CONDITIONER

Technical Data Sheet No. TD9809M Rev. F Date of Issue: December 9, 2009 OPERATING MANUAL I/O SIGNAL CONDITIONER CAUTION: THIS PRODUCT DOES NOT PROVIDE GALVANIC ISOLATION. DO NOT ATTEMPT USE OF THIS PRODUCT

8-line IPAD low capacitance EMI filter and ESD protection in QFN package

Datasheet 8-line IPAD low capacitance EMI filter and ESD protection in QFN package Features 1 QFN 16L 3.3 mm x 1.5 mm (bottom view) 100 Ω Input 1 Output 1 C = 22.5 pf C = 22.5 pf Typical line capacitance

Model Number: DZ300-12EU

Model Number: DZ300-12EU Data Sheet Revision A February 2007 www.optimal-power.com i PROPRIETARY DATA All data in this datasheet is proprietary and may not be disclosed, duplicated or used for procurement

EMIF03-SIM06F3. 3-line IPAD, EMI filter including ESD protection. Description. Features. Application. Complies with the following standards:

3-line IPAD, EMI filter including ESD protection Description Datasheet production data The EMIF03-SIM06F3 chip is a highly integrated audio filter device designed to suppress EMI/RFI noise in all systems

PAN1740 Design Guide

1 of 14 PAN1740 2 of 14 TABLE OF CONTENTS 1. Scope of this Document... 3 2. Key benefits when using PAN1740... 3 3. Bluetooth Low Energy... 3 4. Description PAN1740... 4 5. Block Diagram PAN1740 Module...

Installation instructions Inclination sensor EC2019 EC / / 2013

Installation instructions Inclination sensor UK EC219 EC245 739215 / 3 1 / 213 Inhalt 1 Safety instructions 3 2 Mounting 4 3 Electrical connection 4 4 Dimensions 4 5 Technical Data 5 6 Characteristics

LD A very low drop adjustable positive voltage regulator. Description. Features

7 A very low drop adjustable positive voltage regulator Description Datasheet - production data Features P ² PAK Output current limit Low-dropout voltage: typically 400 mv at 7 A output current Output

Obsolete Product(s) - Obsolete Product(s)

2-line IPAD, EMI filter and ESD protection for speaker Figure 1. Pin configuration (top view) and basic cell configuration Input SPK R in GND SPK L in 1 Pin 1 Micro QFN 6 leads 1.45 mm x 1.00 mm (bottom

EMIF M8. 4-line IPAD low capacitance EMI filter and ESD protection in micro QFN package. Features. Applications. Description

4-line IPAD low capacitance EMI filter and ESD protection in micro QFN package Features EMI symmetrical (I/O) low-pass filter High efficiency in EMI filtering: -34 db at frequencies from 900 MHz to 1.8

BIPOLAR ANALOG INTEGRATED CIRCUIT

DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT µpc29m33a,µpc29m5a THREE-TERMINAL LOW DROPOUT VOLTAGE REGULATOR DESCRIPTION The µpc29m33a, µpc29m5a of low dropout voltage three terminal positive regulators

ALS-PDIC15-21C/L230/TR8

Features Close responsively to the human eye spectrum Light to Current, analog output Good output linearity across wide illumination range Low sensitivity variation across various light sources Operating

4-Channel 1-wire Dimming LED Driver with Ultra Low Dropout Current Source

4-Channel 1-wire Dimming LED Driver with Ultra Low Dropout Current Source FEATURES DESCRITION Ultra low dropout: 50mV/20mA(typical) Support up to 4 LEDs LED sink current up to 20mA ±1% LED current matching(typical)

NPN output. 200 mm. Type Cable length Model Remarks

Retroreflective Photomicrosensor with Lens CSM DS_E_5_2 Photomicrosensor with light modulation for reduced external light interference. Easy adjustment and optical axis monitoring with a light indicator.

QPRO Family of XC1700E Configuration PROMs

11 QPRO Family of XC1700E Configuration PROMs Product Specification Features Configuration one-time programmable (OTP) read-only memory designed to store configuration bitstreams of Xilinx FPGA devices

ESDA17P100-1U2M. High power transient voltage suppressor. Description. Features. Applications

High power transient voltage suppressor Datasheet - production data Description The ESDA17P100-1U2M is a unidirectional single line TVS diode designed to protect the power line against EOS and ESD transients.

www.greenelectricalsupply.com UNV Dimmable LED Driver w/ Tuning 1050mA Constant Current Output Class 2, 55W Output 0 10V Dimming to 1% Performance Input Voltage 120 ~ 277 Vac Input Current Max 0.54 /120V

Document status: Preliminary

LPC1788-32 OEM Board Feature Highlights The LPC1788-32 OEM Board provides a quick and easy solution for implementing a high-performance ARM Cortex-M3 based design around the LPC1788 from NXP. Build around

BPS110 Series - 12 mm Analog Low Pressure Sensor

Features n Compensated analog output n Ultra-low pressure sensing n Gauge and differential types n For use in clean, dry air and non-corrosive gas environments n Tape and reel packaging n RoHS compliant*

Sendyne SFP102MOD Precision Current Measurement Module

Sendyne Sensing Products Family Sendyne SFP102MOD Precision Current Measurement Module Description The Sendyne SFP102MOD is a shunt-based precision current measurement module. The 100-μΩ shunt with molded

Description. EPPL (2) Target Temp. range. Notes: (1) SMD = standard microcircuit drawing. (2) EPPL = ESA preferred part list

Rad-hard LVDS serializer Datasheet - production data Features 15 to 75 MHz shift clock support Fail-safe function 8 kv HBM on LVDS pins Power-down mode < 216 µw (max) Cold sparing all pins Narrow bus reduces

INSTALLATION MANUAL. LC 200 Electronic Overload Guard. Software versione PW0501 R 0.3

INSTALLATION MANUAL LC 200 Electronic Overload Guard Software versione PW0501 R 0.3 CONTENTS MAIN FEATURES LC 200 TECHNICAL FEATURES Page 2 SYMBOLS Page 3 WARNINGS Page 3 IDENTIFICATION DATA PLATE Page

EM8D-100L EMI FILTER/TVS ARRAY DESCRIPTION DFN-16 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS CIRCUIT DIAGRAM & PIN CONFIGURATION

EMI FILTER/TVS ARRAY DESCRIPTION The is a DFN-16, 8 line low pass filter array with integrated TVS diodes. The is designed to suppress unwanted EMI/RFI signals and provide ESD protection for high-speed

i.mx 6Solo/6DualLite Product Lifetime Usage Estimates

Freescale Semiconductor, Inc. Application Note Document Number: AN4725 Rev. 2, 02/2015 i.mx 6Solo/6DualLite Product Lifetime Usage Estimates This document describes the estimated product lifetimes for

STBC ma standalone linear Li-Ion battery charger with thermal regulation. Description. Features. Applications

800 ma standalone linear Li-Ion battery charger with thermal regulation Description Datasheet - production data Features Programmable charge current up to 800 ma No external MOSFET, sense resistors or

ESDALC20-1BF4. Low clamping, low capacitance bidirectional single line ESD protection. Description. Features. Applications

Low clamping, low capacitance bidirectional single line ESD protection Description Datasheet - production data The ESDALC20-1BF4 is a bidirectional single line TVS diode designed to protect the data line

HSP line ESD protection for high speed lines. Applications. Description. Features. µqfn 4 leads. Benefits. Complies with following standards

2-line ESD protection for high speed lines Datasheet - production data Benefits High ESD robustness of the equipment Suitable for high density boards Complies with following standards MIL-STD 883G Method

QUAD OPERATIONAL AMPLIFIER

FUJITSU SEMIONDUTOR DATA SHEET DS04-11107-3E LINEAR I QUAD OPERATIONAL AMPLIFIER MB3614 QUAD OPERATIONAL AMPLIFIER OPERATES FROM A SINGLE OR DUAL POWER SUPPLY The Fujitsu MB3614 is a Quad operational amplifier

Satellite INSTALLATION GUIDE

N3 Satellite INSTALLATION GUIDE ! WARNING! Shock Hazard. May result in serious injury or death. Turn power OFF at circuit breaker or remove fuse. Damage to this product caused by wiring with power on voids

PAM04DF ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-10 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS

ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. This device is designed to protect automotive applications. The is available in the

Series: DZ100 Universal AC to 100W Power Bricks

Series: DZ00 Universal AC to DC @ 00W Power Bricks Data Sheet Revision B 200 www.optimal-power.com PROPRIETARY DATA All data in this datasheet is proprietary and may not be disclosed, duplicated or used

CPCI - 6U - AC - 600W

Electrical Specification for: CPCI - 6U - AC - 600W Telkoor Part Number: 900-6115-0000 SCALE RELEASE DATE 13/12/08 SHEET 1 OF 7 REVISION HISTORY Rev Level Rev Date Change Made Reason for Change Effective

Manual. The 24V single-channel circuit breaker system

Manual The 24V single-channel circuit breaker system BLOCK Transformatoren-Elektronik GmbH Max-Planck-Strasse 36 46 27283 Verden Germany Tel. +49 (0) 4231 678-0 Fax +49 (0) 4231 678-177 info@block.eu block.eu

Continuous Input Voltage Filtering Outputs Maximum Output Power Typical Efficiency Operation: -40 C to 85 C (at Card Edge)

VITA 62 Compliant Power Supply 18V - 40V Input EMI 6 500W 91% Continuous Input Voltage Filtering Outputs Maximum Output Power Typical Efficiency Operation: -40 C to 85 C (at Card Edge) VPX Features Outputs:

REVISION HISTORY Rev Level Rev Date Change Made Reason for Change Effective Approved By A 13/12/08 Specification Release 13/12/08 S. Sadot A1 13/02/09

Electrical Specification for: CPCI - 6U - DC - 600W Telkoor Part Number: 900-6113-0000 SCALE RELEASE DATE 13/12/08 SHEET 1 OF 7 REVISION HISTORY Rev Level Rev Date Change Made Reason for Change Effective

SKYA21001: 20 MHz to 3.0 GHz SPDT Switch

DATA SHEET SKYA21001: 20 MHz to 3.0 GHz SPDT Switch Automotive Applications Infotainment Automated toll systems Garage door opener 802.11 b/g/n WLAN, Bluetooth systems Wireless control systems Outdoor

ASM330LHH. Automotive 6-axis inertial module: 3D accelerometer and 3D gyroscope. Data brief. Features. Applications. Description

Data brief Automotive 6-axis inertial module: 3D accelerometer and 3D gyroscope Features LGA-14L Typ: (2.5 x 3.0 x 0.83 mm³) AEC-Q100 qualified Extended temperature range from -40 to +105 C Embedded compensation

HSP061-4M10. 4-line ESD protection for high speed lines. Datasheet. Features. Applications. Description

Datasheet 4-line ESD protection for high speed lines Features I/O I/O 2 GND 3 I/O 3 I/O 4 2 4 µqfn-0l package Functional schematic (top view) 0 9 8 7 5 6 Product status HSP06-4M0 Internal ly not connected

Lead free and RoHS package. High reduction of parasitic elements through integration Complies with IEC level 4 standards:

Datasheet Common mode filter with ESD protection for high speed serial interface Features 5GHz differential bandwidth to comply with HDMI 2.0, HDMI 1.4, USB 3.1, MIPI, Display port, etc. High common mode

QUALITY ASSURANCE FOR SPACE INSTRUMENTS BUILT WITH COTS

QUALITY ASSURANCE FOR SPACE INSTRUMENTS BUILT WITH COTS Peter Buch Guldager, Gøsta G. Thuesen, John Leif Jørgensen ØRSTED*DTU, Measurement and Instrumentation Systems, Building 327, Technical University

TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7SGU04FU IN A GND

TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7SGU04FU Inverter (Unbuffered) Features High output current : ±8 ma (min) at = 3 Super high speed operation : t pd = 1.9 ns (typ.) at = 3.3,

OZONE SWITCH Model OS-6. OS-6 Features

USER MANUAL OZONE SWITCH Model OS-6 OS-6 Features The OS-6 is an industrial grade ozone controller and monitor. The OS-6 design is optimized for accuracy and ease of installation, setup and operation.

Technical Note Series

Technical Note Series pir SENSOR (T2600) S TN0012-0 0 p I R S e n s o r Page 2 IMPORTANT OPERATION INFORMATION Type BF Equipment Internally powered equipment Continuous operation WARNING Explosion Hazard;

ALS-PT19-315C/L177/TR8

Features Close responsively to the human eye spectrum Light to Current, analog output Good output linearity across wide illumination range Low sensitivity variation across various light sources Guaranteed

User Guide. TP3016M Series Switching Mode DC Power Supply

User Guide TP3016M Series Switching Mode DC Power Supply 1 Introduction I. Quick Start 1.1 Front Panel Description 1.2 Pre-Checking 1.3 Quick Start 1.4 Output Checking II. Specifications 2.1 Major Specification

PLR0521E ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION DFN-2 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION

ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The is an ultra low capacitance transient voltage suppressor array, designed to protect computing applications from the damaging effects of Electrostatic Discharge

HSP051-4N10. 4-line ESD protection for high speed lines. Applications. Description. Features. Benefits. Complies with following standards

4-line ESD protection for high speed lines Datasheet production data Benefits High ESD protection level High integration Suitable for high density boards Figure 1. Functional schematic (top view) I/O 1

StarFinder Aire User Manual

Document No.: Document Type: Security Level: 270-UM-001 User Manual Open StarFinder Aire User Manual (Preliminary) Version 1.00 Dec. 05, 2015 Copyright Laipac Technology Inc. Release History Revision Date

Specification Status: RELEASED

PAGE NO.: 1 OF 8 Specification Status: RELEASED GENERAL DESCRIPTION TE Circuit Protection PolyZen devices are polymer enhanced, precision Zener diode micro-assemblies. They offer resettable protection

Exceeds IEC level 4 standards: ±25 kv (air discharge) ±10 kv (contact discharge) Notebook, laptop Streaming box

Datasheet Common mode filter with ESD protection for high speed serial interface Features 6.4 GHz differential bandwidth to comply with HDMI 2.1, HDMI 2.0, HDMI 1.4, USB 3.1 Gen 1 and Gen 2, MIPI, display

HCC40xxx, HCC45xxx. Rad-hard, high voltage, CMOS logic series. Description. Features

HCC40xxx, HCC45xxx Rad-hard, high voltage, CMOS logic series Description Datasheet - production data The HCC40xxx and HCC45xxx series are composed of 70 types of high voltage CMOS functions, offering a

TC90195XBG Video signal Processing

CMOS Digital Integrated Circuit Silicon Monolithic TC90195XBG Video signal Processing Overview TC90195XBG is a video signal processing LSI for the HD input and output. This device receives an analog video

TOSHIBA Zener Diode Silicon Epitaxial Type. CRY62 to CRZ39

TOSHIBA Zener Diode Silicon Epitaxial Type CRY62 to CRZ39 Surge absorber Unit: mm Average power dissipation : P = 0.7 W Zener voltage : VZ = 6.2 to 39 V Suitable for compact assembly due to small surface-mount

KA258/KA258A, KA358/KA358A, KA2904

KA258/KA258A, KA358/KA358A, KA2904 Dual Operational Amplifier www.fairchildsemi.com Features Internally Frequency Compensated for Unity Gain Large DC Gain: 100dB Wide Power Supply Range: KA258/KA258A,

TA75W393FU TA75W393FU. Dual Voltage Comparator. Features. Marking (Top View) Pin Connection (Top View)

TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA75W393FU Dual Voltage Comparator This device consist of two independent voltage comparators that designed to operate from a single power supply

MAS9278 IC for MHz VCXO

IC for 10.00 30.00 MHz XO Low Power Wide Supply Voltage Range True Sine Wave Output Very High Level of Integration Integrated Varactor Electrically Trimmable Very Low Phase Noise Low Cost DESCRIPTION The

DSL03-24T ULTRA LOW CAPACITANCE STEERING DIODE/THYRISTOR ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS

ULTRA LOW CAPACITANCE STEERING DIODE/THYRISTOR ARRAY DESCRIPTION The provides ESD, EFT and surge protection for high-speed data interfaces. The 24V thyristor array, steering diode combination device meets

Common mode filter with ESD protection for high speed serial interface

Common mode filter with ESD protection for high speed serial interface Datasheet - production data µqfn-10l 2.60 x 1.35 mm Description The is a highly integrated common mode filter and low pass filter

VPX 6U 18V - 40V Continuous Input Voltage VITA 62 Compliant Power Supply Input EMI Filtering 5 Outputs 1000W Maximum Output Power Operation: -40 C to

6U 18V - 40V Continuous Input Voltage VITA 62 Compliant Power Supply Input EMI Filtering 5 Outputs 1000W Maximum Output Power Operation: -40 C to 85 C (at Card Edge) 91% Typical Efficiency Features Outputs:

PESD2CAN CAN BUS ESD PROTECTION DIODE DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION

CAN BUS ESD PROTECTION DIODE DESCRIPTION The is designed to protect Controller Area Network (CAN) bus lines and other industrial applications such as DeviceNet Bus lines from the damaging effects of Electrostatic

HSP051-4M10. 4-line ESD protection for high speed lines. Applications. Description. Features. Benefits. Complies with following standards

4-line ESD protection for high speed lines Datasheet production data Benefits High ESD protection level High integration Suitable for high density boards Figure 1. Functional schematic (top view) I/O 1

OPR Power Series AC to DC POWER SUPPLY SERIES WITH REMOTE MANAGEMENT AND ALARM SYSTEMS. Model Nos. OPR065-48S / OPR065-48R. Manual

OPR Power Series AC to DC POWER SUPPLY SERIES WITH REMOTE MANAGEMENT AND ALARM SYSTEMS Model Nos. OPR065-48S / OPR065-48R Manual Revision F July 2009 Optimal Power Supplies LLC www.optimal-power.com i

ALS-PT243-3C/L177. 5mm DIP Ambient Light Sensor. Features. Description. Applications

Features Close responsively to the human eye spectrum Light to Current, analog output Good output linearity across wide illumination range Low sensitivity variation across various light sources Operating

PLR ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SC-89 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION

ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance (0.7pF Max. I/O to I/O) steering diode and TVS array combo. This device provides circuit protection for interfaces

Technical Specification VPX 3U Block Diagram for VPX-3U-DC28P VOUT Vin+ Vin rtn EMI Filter (Passive) Isolated Non-isolated +5VOUT Non-isolated

18V - 40V Continuous Input Voltage VITA 62 Compliant Power Supply Input EMI Filtering 6 Outputs 500W Maximum Output Power Operation: -40 C to 85 C (at card edge) 91% Typical Efficiency VPX Features Outputs:

NWP2081T. 1. General description. 2. Features and benefits. 3. Applications. 4. Ordering information. Half-bridge driver IC

Rev. 1 3 September 2013 Product data sheet 1. General description The is a high-voltage monolithic integrated circuit made using the latch-up free Silicon-On-Insulator (SOI) process. The circuit is designed

6-lead SOT23 Differential. 6-lead DFN Differential. CT100LW-KGD -40 C to +150 C Differential Wafer Form Unsawn Wafer

March 2019 1D Linear Sensor Features Operating Magnetic Field ange: ±20 mt Stable Magnetic Performance over Temperature Linearity Error: ±0.5% Differential Outputs Supply Voltage: 1.0 V to 5.5 V Operating

USB208. ultra low capacitance steering diode array. Description. applications

ultra low capacitance steering diode array Description The is an ultra low capacitance steering diode array. This device provides circuit protection for computer interfaces, wireless bus applications and

Automotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus. Description

Automotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus Datasheet - production data Features 3 2 1 SOT323-3L AEC-Q101 qualified Dual-line ESD and EOS protection Stand-off voltage compatible

ESDA8P80-1U1M. High power transient voltage suppressor. Description. Features. Applications

High power transient voltage suppressor Description Datasheet - production data The ESDA8P80-1U1M is a unidirectional single line TVS diode designed to protect the power line against EOS and ESD transients.

ESDA7P60-1U1M. High power transient voltage suppressor. Description. Features. Applications. Complies with the following standards:

High power transient voltage suppressor Description Datasheet - production data The ESDA7P60-1U1M is a unidirectional single line TVS diode designed to protect the power line against EOS and ESD transients.

Dual back-to-back Zener diode

Rev. 01 28 January 2008 Product data sheet 1. Product profile 1.1 General description in a SOD323 (SC-76) very small Surface-Mounted Device (SMD) plastic package. 1.2 Features Non-repetitive peak reverse

Endcap Modules for the ATLAS SemiConductor Tracker

Endcap Modules for the ATLAS SemiConductor Tracker RD3, Firenze, September 29 th, 23 Richard Nisius (MPI Munich) nisius@mppmu.mpg.de (For the ATLAS-SCT Collaboration) The plan of this presentation Introduction

SRV25-4LC ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-10 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS

ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART

STOD32W. 100 ma triple DC-DC converter for powering AMOLED displays. Applications. Features. Description

100 ma triple DC-DC converter for powering AMOLED displays Data brief True-shutdown mode Short-circuit protection Package Flip Chip 12 bumps (1.618 x 1.710 mm), 0.4 mm pitch Features Flip Chip 12 (1.618

EBLC05C - EBLC12C ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION

ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The EBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and SMART phones.

HSP051-4M10. 4-line ESD protection for high speed lines. Datasheet. Features. Applications. Description

Datasheet 4-line ESD protection for high speed lines Features I/O 1 I/O 2 GND 3 I/O 3 I/O 4 1 2 4 µqfn-10l package Functional schematic (top view) 10 9 8 7 5 6 Internal ly not connected GND Internal ly

DATASHEET 4D SYSTEMS TURNING TECHNOLOGY INTO ART. Embedded DOS micro-drive Module. μdrive-μsd-g1

TURNING TECHNOLOGY INTO ART DATASHEET Embedded DOS micro-drive Module μdrive-μsd-g1 Document Date: 11 th September 2012 Document Revision: 1.1 Uncontrolled Copy when printed or downloaded. Please refer

DF10G7M1N DF10G7M1N. 1. Applications. 2. Packaging and Internal Circuit Rev.5.0. Start of commercial production

ESD Protection Diodes DF10G7M1N Silicon Epitaxial Planar DF10G7M1N 1. Applications ESD Protection for: USB 2.0 USB 3.0 HDMI SATA/eSATA DisplayPort Interface Digital Visual Interface (DVI) MDDI PCI Express

The TRSUN is the complete solution for the remote monitoring of photovoltaic plants.

The TRSUN is the complete solution for the remote monitoring of photovoltaic plants. Monitoring of inverters and string combiner boxes (up to 64 devices); Complete configuration of the monitoring system

AST 2000 LINEAR IC TESTER OVERVIEW

AST 2000 LINEAR IC TESTER OVERVIEW The AST 2000 is well-suited for testing op amps, comparators, voltage regulators, voltage references and power supplies. Its hardware and software are architected to

NB2304A. 3.3V Zero Delay Clock Buffer

3.3V Zero Delay Clock Buffer The NB304A is a versatile, 3.3 V zero delay buffer designed to distribute high speed clocks in PC, workstation, datacom, telecom and other high performance applications. It

SL2ICS5311EW/V7. Name Description. Diameter: 8 Thickness: Material: ground + stress releave. Roughness: R t max. 5 μm. Chip size: 940 x 900 μm 2

Wafer addendum Rev. 3.0 8 May 2008 Product data sheet 131030 PUBLIC 1. General description 2. Ordering information This specification describes the electrical, physical and dimensional properties of Au-bumped

PSLC03 - PSLC24C. 350 watt low capacitance tvs array. applications

350 watt low capacitance tvs array Description The PSLC and PSLCxxC Series of devices are low capacitance TVS arrays available in a SOT-3 package. These devices are designed to protect Ethernet data I/O

Weather Station Display Software Rev A

Weather Station Display Software 57-6058 Rev A This page intentional left blank. Page 2/16 Contents 1.0 NOTICES...4 1.1.1 1.1.2 1.1.3 1.1.4 Copyright...4 Manufacturer...4 Warranty Information...4 Product

Operating instructions. Standstill monitor A / / 2011

Operating instructions Standstill monitor A300 UK 1 2 3 4 5 6 7 8 7390337 / 01 02 / 2011 1 2 3 4 5 6 7 8 switchpoint min max pulse/min power Made in Germany ifm electronic gmbh D 45127 Essen func. I II

Detection Voltage Selection Guidelines for Application of NCP30X Family Series

Design Note DN06060/D Detection Voltage Selection Guidelines for Application of Family Series Device Application Input Voltage Output Power Topology I/O Isolation Voltage Supervisory Rest IC N/A N/A N/A

S-5840B Series TEMPERATURE SWITCH IC (THERMOSTAT IC) WITH LATCH. Features. Applications. Package.

www.sii-ic.com TEMPERATURE SWITCH IC (THERMOSTAT IC) WITH LATCH SII Semiconductor Corporation, 2007-2012 Rev.2.1_01 The is a temperature switch IC (thermostat IC) with a latch function which detects the

Order code Temperature range ( C) Package Packing

MEMS motion sensor: three-axis analog gyroscope Preliminary data Features Two selectable full scales (625/2500 dps) Embedded self-test Wide supply voltage range: 2.4 V to 3.6 V Embedded power-down and

Product Overview 2Pro AC Devices Provide Overcurrent/Overvoltage/ Overtemperature Protection for AC Industrial and Appliance Applications

Product Overview 2Pro AC Devices Provide Overcurrent/Overvoltage/ Overtemperature Protection for AC Industrial and Appliance Applications The 2Pro AC family of devices provide integrated overcurrent/ overvoltage/overtemperature

Small Signal Zener Diodes

BZX8-G-Series Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT range nom.. to V Test current T ; specification Pulse current Int. construction Single FEATURES Silicon planar Zener

SCHMIDT Sensor interface PROFIBUS Instructions for use

SCHMIDT Sensor interface PROFIBUS Instructions for use Table of contents 1 Important information... 3 2 Intended use... 4 3 Electrical connection... 4 4 Signalizations... 7 5 Startup... 9 6 Technical data...