EuroGateway. IEC Substation Automation System Communication Gateway

Transcription

1 EuroGateway IEC Substation Automation System Communication Gateway

2 Basic Configuration

3 Introduction Communication gateway Substation SCADA Substation HMI IEC client Temporary storage (disturbance records, event logs) Legacy devices on LAN / serial line (e.g. traditional Protecta and ABB protections) External and substation Ethernet port Extension cards HW by Protecta, SW by SoftReal

4 Substation Network Protocols IEC MMS client for receiving reports IEC client for legacy devices (protections, RTU) Protecta Over IP (PoIP) client for retreiving disturbance records and events; forward ProtectW messages (legacy Protecta devices)

5 External Network Protocols IEC server for SCADA; server or client for data exchange between gateways srhmi server for local / remote display http server for browser-based diagnostics

6 Extension Cards RS232 optical card Up to 15 cards Up to 4 serial lines per cards Cards can be grouped to 4 star topology networks RS485 bus card USB card Programmable card

7 Serial Line Protocols IEC client for legacy devices (protections, RTU) IEC server for SCADA / RTU Protecta (main) client for retrieving disturbance records and events; forward ProtectW messages (legacy Protecta devices) ABB-SPA client for retrieving disturbance records and events

8 Hardware Description

9 LED Indicators

10 Network Configurations

11 Network Configurations

12 Network Configurations

13 Network Configurations

14 Network Configurations

15 Network Configurations

16 Network Configurations

17 Star vs. Ring Topology

18 License Management Basic Module IEC client to receive data from and to transmit commands to IEDs (8-MMS); configured from SCD file SCADA on LAN IEC server (controlled station) to forward collected data to and receive commands from SCADA; export configuration to text file Clock synchronization from an NTP time server on the substation LAN Routing between networks TCP / UDP port forwarding from external to substation LAN

19 License Management Display (HMI) srhmi server function and number of srhmi clients total number of simultaneous connections number of permanent HMIs TCP/IP-based communication; connection with substation LAN not required; zero configuration shared data objects, event logs and disturbance records; backup storage required monitor state signal change; check analog values against 4 limits; log and alarm

20 License Management Legacy Devices on LAN Substation LAN IEC client (controlling station) to receive data from and to transmit commands to a protection / RTU; configured from import file External LAN IEC client (controlling station) to receive data from and to transmit commands to a slave gateway; import slave configuration

21 License Management Legacy Devices on Serial Line Unbalanced IEC client (controlling station) to receive data from and to transmit commands to protections; star topology network; configured from import file Balanced IEC client (controlling station) to receive data from and to transmit commands to an RTU; point-topoint connection; configured from import file

22 License Management Legacy Protecta Device Protecta on LAN Protecta over IP (PoIP) client to retrieve events and disturbance records (additional license required); clock synchronization; forward ProtectW messages; configured from import file Protecta on Serial Line Protecta client to retrieve events and disturbance records (additional license required); clock synchronization; forward ProtectW messages; star topology network; configured from import file

23 License Management ABB-SPA ABB-SPA client to retrieve events and disturbance records (additional license required); serial SPA bus; configured from import file

24 License Management SCADA on Serial Line IEC server (controlled station, balanced) to forward collected data to and receive commands from SCADA / RTU; export configuration to text file

25 License Management Disturbance Record Management Monitoring and retrieving disturbance records via varoius protocols: IEC Device FTP client (no other license needed) Legacy Protecta Device protocol function license required ABB-SPA protocol function license required Temporary storage (backup storage device required); FTP server on external LAN

26 Configuring the System Create Configuration from SCD File

27 Configuring the System Process Control System (SCADA)

28 Configuring the System Network Settings

29 Configuring the System Signal Types

30 Diagnostics Hardware Indicators LED indicators on Ethernet ports and on processor module Web Browser

31 Web Browser Status

32 Web Browser State Signals

33 Web Browser Measured Values

34 srhmi: Dispatcher / Protection Workstation Human-machine interface to support operator s work Graphical interface with custom scheme images (srdraw) to display data and initiate commands Connection with the selected EuroGateway; zero configuration Several equivalent srhmis may work simultaneously; permanent or temporary srhmi The number of connections is limited in the EuroGateway

35 srhmi: Dispatcher / Protection Workstation Current data and event log are updated continuously Disturbance records are downloaded on demand, graphical evaluation Filters and selections for event log Graphical trends Built-in user account management; accounts with different access rights

36 Scheme Image (E ON DÉDÁSZ Rt. Nagykanizsa)

37 Event Log