Switches and Multiplexers Portfolio
|
|
|
- Annabelle Potter
- 5 years ago
- Views:
Transcription
1 Switches and Multiplexers Portfolio Analog Devices offers a large range of switches and multiplexers covering single to multiple switch elements with various signal ranges and in a variety of packages to best suit customer application needs. Analog Devices switches can be classified into families when choosing based on supply voltage. High voltage switches are optimized when using the maximum signal range, but are also specified for use at lower voltages. The following families of parts exist: ADG54xxF New ADG46xx Fault detection and protection, best-in-class for switch/mux fault protection ±5 V power-off protection with overvoltage 5.5 V to +16 V ±55 V OVP in power-on and power-off states, high ESD, latch-up immune Optimized for robustness and protection Operational up to ±22 V dual supply and +44 V single supply ADG52xx Lowest RON in ±5 V class; minimum distortion and high continuous current Latch-up immune under all conditions, high ESD, lowest leakage at temperature in ±15 V class Min 1 Ω RON, 0.2 Ω RON flatness Operational up to ±22 V dual supply and +40 V single supply Optimized for robustness and precision operation ADG54xx Latch-up immune under all conditions, highest ESD in the ±15 V class Operational up to ±22 V dual supply and +40 V single supply Optimized for robustness and precision operation ADG14xx Lowest RON in ±15 V class; minimum distortion and high continuous current Min 1 Ω RON, 0.2 Ω RON flatness ADG12xx Lowest QINJ and capacitance in ±15 V class <1 pc QINJ, 2 pf off capacitance ADG13xx ±15 V RON and QINJ optimized Optimized for standard performance applications ADG5xx ±15 V and ±5 V low QINJ and capacitance RON = 30 Ω to 280 Ω, QINJ = 4 pc to 11 pc ADG5xxF ±15 V with overvoltage/fault protection 40 V to +55 V ADG16xx ADG6xx ±5 V low RON and low QINJ RON = 2 Ω to 85 Ω, QINJ = 0.5 pc to 50 pc ADG8xx <5.5 V ultralow RON and minimum distortion and high continuous current RON = 0.25 Ω to 0.8 Ω, 0.05 Ω to 0.17 Ω RON flatness ADG7xx <5.5 V low RON RON = 2.2 Ω to 15 Ω, QINJ = 2 pc to 14 pc ADG9xx Low voltage dc to high frequency RF 3 db = 2.5 GHz to 4.5 GHz ADG3xxx Low voltage level translators/bus switches Unidirectional and bidirectional digital ADG21xx Unbuffered crosspoint switches - and single-supply I2C controlled Enhanced Product and Automotive Parts Please contact ADI technical support and sales for details ADG4xx ±15 V low RON and low QINJ; RON = 4 Ω to 50 Ω, QINJ = 1 pc to 20 pc ADG4xxF ±15 V with overvoltage/fault protection 40 V to +55 V ADG2xx ±15 V low QINJ and capacitance RON = 30 Ω to 115 Ω, QINJ = 10 pc to 20 pc analog.com/switch-mux
2 On Leakage Typ (na) TSSOP LFCSP DIP SOIC PLCC Cerdip LCC SSOP Unbuffered Analog Crosspoint Arrays ADG array I 2 C 4.21 ADG array I 2 C 6.29 ±15 V Analog ADG1401/ADG1402 SPST Parallel 1.44 ADG417 SPST Parallel 1.02 ADG1201/ADG1202 SPST Parallel 0.79 ADG1421/ADG1422/ADG1423 SPST Parallel 1.62 ADG1221/ADG1222/ADG1223 SPST Parallel 0.99 ADG1411/ADG1412/ADG1413 SPST Parallel 2.66 ADG451/ADG452/ADG453 SPST Parallel 1.95 ADG431/ADG432/ADG433 SPST Parallel 1.95 ADG411/ADG412/ADG413 SPST Parallel 1.95 ADG201HS SPST Parallel 2.72 ADG441/ADG442/ADG444 SPST Parallel 0.75 ADG201A/ADG202A SPST Parallel 1.62 ADG221 SPST Parallel 1.49 ADG211A/ADG212A SPST Parallel 1.39 ADG1211/ADG1212/ADG1213 SPST Parallel 1.53 ADG1311/ADG1312/ADG1313 SPST Parallel 1.17 ADG1414 SPST SPI 3.14 ADG1419 SPDT Parallel 1.52 ADG419 SPDT Parallel 1.28 ADG1219 SPDT Parallel 0.93 ADG1436 SPDT Parallel 2.53 ADG436 SPDT Parallel 2.31 ADG1236 SPDT Parallel 1.44 ADG1433/ADG1434 SPDT 3/SPDT Parallel 2.17 ADG333A SPDT Parallel 2.73 ADG1233/ADG1234 SPDT 3/SPDT Parallel 2.17 ADG1334 SPDT Parallel 2.15 ADG1404F 4:1 mux Parallel 2.53 ADG1204 4:1 mux Parallel 1.44 ADG1408/ADG1409 8:1 diff/4:1 mux /115 Parallel 2.55 ADG1438/ADG1439 8:1 diff/4:1 mux /130 SPI 2.96 ADG408/ADG409 8:1 diff/4:1 mux Parallel 2.48 ADG428 8:1 mux Parallel 3.14 ADG1208/ADG1209 8:1 diff/4:1 mux Parallel 2.55 ADG1308/ADG1309 8:1 diff/4:1 mux Parallel 1.95 ADG508A/ADG509A 8:1 diff/4:1 mux Parallel 2.44 ADG1406/ADG :1 diff/8:1 mux /110 Parallel 4.81 ADG406/ADG407 16:1 diff/8:1 mux Parallel 5.54 ADG426 16:1 mux Parallel 5.36 ADG1206/ADG :1 diff/8:1 mux /490 Parallel 4.14 ADG506A/ADG507A 16:1 diff/8:1 mux Parallel 5.41 ADG526A/ADG527A 16:1 diff/8:1 mux Parallel 5.38 HBM ESD Level I/O Port to I/O Port (kv) HBM ESD Level All Other Pins (kv) On Leakage Q INJ Typ Typ (na) TSSOP LFCSP MSOP ±15 V Latch-Up Immune ADG5401 SPST Parallel 1.60 ADG5421/ADG5423 SPST Parallel 1.85 ADG5412F/ADG5413 SPST Parallel 2.18 ADG5212/ADG5213 SPST Parallel 2.18 ADG5419 SPDT Parallel 1.71 ADG5436 SPDT Parallel 2.26 ADG5236 SPDT Parallel 2.26 ADG5433 SPDT Parallel 2.15 ADG5233 SPDT Parallel 2.15 ADG5434 SPDT Parallel 3.04 ADG5234 SPDT Parallel 3.04 ADG5404 4:1 mux Parallel 2.26 ADG5204 4:1 mux Parallel 2.26 ADG5408/ADG5409 8:1 diff/4:1 mux Parallel 2.41 ADG5208/ADG5209 8:1 diff/4:1 mux /133 Parallel 2.41 ADG5206/ADG :1 diff/8:1 mux /140 Parallel 4.40 MSOP DIE
3 Special Feature On Leakage Typ (na) 2 to to to to to to 8 TSSOP LFCSP DIP Cerdip SOIC MSOP QSOP DIE ±5 V Analog ADG601/ADG602 SPST Parallel 0.89 ADG621 SPST Parallel 0.94 ADG1611/ADG1612/ADG1613 SPST Parallel 1.75 ADG511/ADG512/ADG513 SPST Parallel 2.04 ADG611/ADG612/ADG613 SPST Parallel 1.45 ADG619 SPDT Parallel 0.94 ADG1636 SPDT Parallel 1.83 ADG636 SPDT Parallel 1.55 ADG1633 SPDT Parallel 1.72 ADG633 SPDT Parallel 0.85 ADG1634 SPDT Parallel 2.35 ADG1604 4:1 mux Parallel 1.83 ADG604 4:1 mux Parallel 1.55 ADG1608/ADG1609 8:1 diff/4:1 mux /71 Parallel 1.98 ADG658/ADG659 8:1 diff/4:1 mux Parallel 0.85 ADG1606/ADG :1 diff/8:1 mux /37 Parallel 3.20 On Leakage Typ (na) HBM ESD Level (kv) R ON Flatness 1.65 to 3.6 On Leakage Typ (na) 2.7 to to TSSOP LFCSP SOIC MSOP QSOP WLCSP TQFP SC70 <5.5 V Analog ADG801/ADG802 SPST Parallel 0.90 ADG841/ADG842 SPST Parallel 0.57 ADG701/ADG702/ADG701L/ADG702L SPST Parallel 0.60 ADG741/ADG742 SPST Parallel 0.65 ADG751 SPST Parallel 0.90 ADG821/ADG822/ADG823 SPST Parallel 1.02 ADG721/ADG722/ADG723 SPST Parallel 0.65 ADG811/ADG812 SPST Parallel 1.22 ADG711/ADG712/ADG713 SPST Parallel 0.90 ADG781/ADG782/ADG783 SPST Parallel 0.90 ADG714 SPST SPI 1.75 ADG715 SPST I 2 C 1.75 ADG819 SPDT Parallel 0.93 ADG849 SPDT Parallel 0.64 ADG852 SPDT Parallel 0.61 ADG719 SPDT Parallel 0.65 ADG749 SPDT Parallel TSSOP LFCSP Fault Detection and Protection; 55 V OVP to +55 V OVP ADG5412F/ADG5413F New SPST 4 Unidirectional fault detection and protection Parallel 3.96 ADG5412BF/ADG5413BF New SPST 4 Bidirectional fault detection and protection Parallel 3.96 ADG5404F New 4:1 mux Unidirectional fault detection and protection Parallel 3.86 On Leakage Typ (na) TSSOP LFCSP DIP SOIC PLCC SSOP Fault Protection; 40 V OVP to +40 V OVP ADG438F/ADG439F 8:1 diff/4:1 mux Parallel 3.64 ADG508F/ADG509F 8:1 diff/4:1 mux Parallel 3.27 ADG528F 8:1 mux Parallel 3.86 Channel Fault Protection; 40 V OVP to +40 V OVP ADG465 Channel protector Parallel 0.75 ADG467 Channel protector Parallel 2.15 Fault Protection; 5.5 V OVP to +16 V OVP ADG4612/ADG4613 SPST Parallel 1.84 MSOP DIE
4 On Leakage Typ (na) 1.65 to 2.7 to to TSSOP LFCSP SOIC 3.6 Propagation Delay Max (ps) Bus Enable Typ (ns) Data Rate (Mbps) Level Translation 1.15 to to to to to to 35 TSSOP LFCSP MSOP QSOP DIE WLCSP SC70 Bus Switches/Level Translators ADG bit bidirectional Down 0.43 ADG bit bidirectional Down 0.56 ADG bit bidirectional Down 0.56 ADG bit bidirectional Down 0.71 ADG bit bidirecional Down 0.74 ADG bit bidirecional Down 0.98 ADG bit 2:1 bidirectional Down 0.56 ADG bit 2:1 bidirectional Down 0.59 Level Translators ADG bit unidirectional N/A 4000 N/A Up/down 0.43 ADG bit bypass unidirectional N/A Up/down 0.57 ADG bit CMOS to HV unidirectional N/A Up 2.30 ADG bit bidirectional N/A Up/down 0.46 ADG bit bidirectional N/A Up/down 0.96 ADG bit bidirectional N/A Up/down 1.60 ADG3308/ADG bit bidirectional N/A Up/down 1.60 Off Isolation Insertion Loss Power (dbm) 3 db TSSOP LFCSP MSOP Low Voltage, DC to High Frequency RF ADG901/ADG902 SPST 1 37 db (1 GHz) 0.8 db (1 GHz) to 2.75 Parallel 1.03 ADG918/ADG919 SPDT 1 37 db (1 GHz) 0.8 db (1 GHz) to 2.75 Parallel 1.07 ADG936/ADG936-R SPDT 2 36 db (1 GHz) 0.9 db (1 GHz) to 2.75 Parallel 1.52 ADG904/ADG904-R 4:1 mux 37 db (1 GHz) 1.1 db (1 GHz) to 2.75 Parallel 1.52 MSOP QSOP WLCSP TQFP SC70 <5.5 V Analog (continued) ADG779 SPDT Parallel 0.64 ADG752 SPDT Parallel 1.17 ADG884 SPDT Parallel 0.90 ADG824 SPDT Parallel 0.80 ADG836/ADG836L SPDT Parallel 0.98 ADG854 SPDT Parallel 0.91 ADG736/ADG736L SPDT Parallel 0.90 ADG787 SPDT Parallel 0.92 ADG772 SPDT Parallel 0.81 ADG733 SPDT Parallel 1.10 ADG786 SPDT Parallel 1.10 ADG858 SPDT Parallel 1.27 ADG774 SPDT Parallel 1.45 ADG784 SPDT Parallel 1.45 ADG774A SPDT Parallel 1.49 ADG734 SPDT Parallel 1.35 ADG788 SPDT Parallel 1.35 ADG794 SPDT Parallel 1.23 ADG790 SPDT 4 diff/4:1 mux 5.9/ / /230 Parallel 2.64 ADG888 DPDT Parallel 1.60 ADG804 4:1 mux Parallel 0.98 ADG704 4:1 mux Parallel 0.95 ADG728/ADG729 8:1 diff/4:1 mux /100 I 2 C 1.60 ADG738/ADG739 8:1 diff/4:1 mux /100 SPI 1.60 ADG708/ADG709 8:1 diff/4:1 mux Parallel 1.25 ADG758/ADG759 8:1 diff/4:1 mux Parallel 1.25 ADG706/ADG707 16:1 diff/8:1 mux /36 Parallel 2.55 ADG726/ADG732 32:1 diff-dual/16:1 mux /18 Parallel 4.51 ADG725/ADG731 32:1 diff-dual/16:1 mux /18 SPI 4.59
5 Choosing the Correct Switch or Multiplexer for Your Application Supply voltage, configuration, specifications, robustness level, and package are the key requirements in choosing the correct switch/mux for your application. As an individual switch cannot be optimized in all respects, Analog Devices offers a large and varied selection of options that cover differing supply voltages and configurations, high performance, and industry-leading package sizes. Supply Voltage Depending on the supply voltage that you require, ADI can offer you a number of high performance switches and multiplexers that suit your application. Low voltage switches can offer performance advantages over higher voltage switches. High voltage switches are optimized when using the maximum signal range, but are specified for use at lower voltages also. ADI offers a varied range of supply voltages from: ±15 V ±5 V Low voltage (up to 5 V) - and dual-supply options If, for example, you are using a 5 V power supply in your circuit and require a switch, then the best switch to choose would be one of our low voltage (<5 V) switches and not one of our high voltage (±15 V) parts. Likewise, if you require high voltage operation, then the ±15 V will be optimized for operation at these voltages and the performance will degrade as the voltage is reduced. Configuration Do you need a switch or a multiplexer? If a switch, do you need an SPST (single-pole, single throw) or an SPDT (single-pole, double throw)? How many channels do you need? Do you need a bus switch or level translator (for digital signals)? What interface do you require? I 2 C: 2-wire digital interface; SCL (clock) and SDA (data) SPI: 3-wire serial interface; FSYNC, DATA, SCLK Parallel: simple digital interface; logic high/low on the pin dictates the state of the switch SPI and I 2 C offers the advantage of reducing the number of digital pins required when using switches/muxes of large array size Robustness Feature Set Do you require a switch/mux optimized for robustness with fault detection capabilities, overvoltage protection up to ±55 V, latch-up immunity, and power-off protection (with overvoltage)? Then ADI has the product to meet your needs. Fault detection means the parts offer a digital indicator to signal the presence of a fault condition, thereby enabling the channel in fault to be avoided or corrective action to be taken. Overvoltage protection means the switch is guaranteed to withstand specified voltages on the analog inputs that exceed the supplies. Latchup immunity means that latch-up will not occur regardless of the power sequence to the device. Power-off protection means the device is guaranteed in a high impedance off state with no power supplies present. Do you require enhanced product features (typically used for military/aerospace applications) or automotive qualified (AECQ-100) parts? Please contact ADI technical support and sales for details. Specifications Parameter Definition Indicator Supply voltage Voltage of the analog switch circuit Must be bigger than signal amplitude R ON (on resistance) Resistance of the closed switch path Lower is better On leakage Leakage currents into/out of a switch channel Lower is better Q INJ (charge injection) Disturbance to signal from control input Lower is better (bandwidth) Frequency range of the switch in the on state where the switch attenuates the input signal by 3 db Higher is better Off isolation Transfer function of the switch when in the off state Higher is better Insertion loss Transfer function of the switch when in the on state Lower is better Power Maximum signal power the switch can pass in the on state Higher is better Propagation delay Time required for signal to travel through switch Lower is better Bus enable Time required to enable or disable the bus switch Lower is better Data rate Speed of data that the switch/mux can handle Higher is better Package All ADI switches are offered in a number of different package options, offering, in some cases, up to 75% savings on board space vs. the nearest competitor. Details of these package types and information on package sizes can be seen on the back page of this guide. Technical Support and Sales Applications engineers are available by phone or to discuss any queries with regard to any of our switches. Details can be found on our website Samples are available for all our switches and can be requested through your local ADI representative.
6 Examples of Some of the Package Types Available Lead Count Options Example Body Size (mm) Example Board Area (sq mm) Example Pitch (mm) Package Code TSSOP 14/16/20/24/28/ (14-lead) 32 (14-lead) 0.65 (14-lead) RU-X2 MSOP 8/ (8-lead) 14.7 (8-lead) 0.65 (8-lead) RM-X2 LFCSP 8/10/12/16/20/ 24/32/40/ (8-lead) 9 (8-lead) 0.65 (8-lead) CP-X2 SOT-23 5/6/ (5-lead) 8.12 (5-lead) 0.95 (5-lead) RT/RJ-X2 SC70 5/ (5-lead) 4.2 (5-lead) 0.65 (5-lead) KS-X2 SOT (6-lead) 2.74 (6-lead) 0.5 (6-lead) RY-X2 Mini LFCSP 10/ (10-lead) 2.08 (10-lead) 0.4 (10-lead) CP-X2 WLCSP1 5/6/10/12/ (5-ball) 1.16 (5-ball) 0.5 (5-ball) CB-X2 Package Dimensions dependent by part. -X denotes number of leads. 1 2 Common Switch and Multiplexer Configurations 1 SPST 1 1A A 2 SPDT 1/2:1 MUX 4A 1B SPST 2 B 8 4B 1 OF 8 DECODER SPDT 2/ 2 2:1 MUX A0 A1 8:1 MUX 1 OF 4 DECODER A2 A0 A1 EN DIFF 4:1 MUX SPST 4 SPDT 4/ 4 2:1 MUX For more information on ADI switches and multiplexers, visit our website at I 2C refers to a communications protocol originally developed by Philips Semiconductors (now NXP Semiconductors) All rights reserved. Trademarks and registered trademarks are the property of their respective owners. Printed in the U.S.A. STx-x-x/14(G) Worldwide Headquarters One Technology Way P.O. Box 9106 Norwood, MA U.S.A. Tel: ( , U.S.A. only) Fax: Europe Headquarters Wilhelm-Wagenfeld-Str Munich Germany Tel: Fax: Japan Headquarters Analog Devices, KK New Pier Takeshiba South Tower Building Kaigan, Minato-ku, Tokyo, Japan Tel: Fax: Asia Pacific Headquarters Analog Devices 5F, Sandhill Plaza 2290 Zuchongzhi Road Zhangjiang Hi-Tech Park Pudong New District Shanghai, China Tel: Fax:
Clock and Timing ICs.
Clock and Timing ICs Analog Devices offers innovative clock and timing solutions designed to improve system performance, enable new architectures, and lower development and manufacturing costs. Products
HIGH SPEED SIGNAL CHAIN SELECTION GUIDE
HIGH SPEED SIGNAL CHAIN SELECTION GUIDE Includes High Speed Cs, DACs, Amplifiers, and Clocking Solutions Visit analog.com and linear.com High Speed Signal Chain Product Selection Guide TABLE OF CONTENTS
ADM2485: 16 Mbps, icoupler Isolated, PROFIBUS -Compliant RS-485 Transceiver with Integrated Transformer Driver in a 16-Lead Surface-Mount Package
S-485 Products 2006 N L O G E V I C E S P P L I C T I O N S U L L E T I N C O N T E N T S M2485: 16 Mbps, icoupler Isolated, POFIUS-Compliant S-485 Transceiver with Integrated Transformer river in a 16-Lead
Obsolete. Parameter Conditions Minimum Typical Maximum Units Insertion Loss. db 1000 MHz Isolation RFCommon to 50 MHz.
Product Description The PE4231 SPDT High Power UltraCMOS RF Switch is designed to cover a broad range of applications from DC to 1.3 GHz. This single-supply reflective switch integrates on-board CMOS control
Low Voltage 1.65 V to 3.6 V, Bidirectional Logic Level Translation, Bypass Switch ADG3233
Low Voltage. V to. V, Bidirectional Logic Level Translation, Bypass Switch FEATURES Operates from. V to. V supply rails Bidirectional level translation, unidirectional signal path -lead SOT- and MSOP packages
2.5 V/3.3 V, 2-Bit, Individual Control Level Translator Bus Switch ADG3243
2.5 V/3.3 V, 2-Bit, Individual Control Level Translator Bus Switch ADG3243 FEATURES 225 ps Propagation Delay through the Switch 4.5 Switch Connection between Ports Data Rate 1.5 Gbps 2.5 V/3.3 V Supply
Single Channel Protector in a SOT-23 Package and a MSOP Package ADG465
Data Sheet Single Channel Protector in a SOT-23 Package and a MSOP Package FEATURES Fault and overvoltage protection up to ±40 V Signal paths open circuit with power off Signal path resistance of RON with
2.5 V/3.3 V, 8-Bit, 2-Port Level Translating, Bus Switch ADG3245
V/3.3 V, 8-Bit, 2-Port Level Translating, Bus Switch ADG3245 FEATURES 225 ps Propagation Delay through the Switch 4.5 Switch Connection between Ports Data Rate 1.244 Gbps V/3.3 V Supply Operation Selectable
2.5 V/3.3 V, 2-Bit Common Control Level Translator Bus Switch ADG3242
2.5 V/3.3 V, 2-Bit Common Control Level Translator Bus Switch ADG3242 FEATURES 225 ps propagation delay through the switch 4.5 Ω switch connection between ports Data rate 1.5 Gbps 2.5 V/3.3 V supply operation
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS 10-BIT BUS SWITCH
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS 10-BIT BUS SWITCH IDTQS338 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs Zero propagation delay,
CW211 Specification High-Speed USB2.0(480Mbps)DPDT Switch
CW211 Specification High-Speed USB2.0(480Mbps)DPDT Switch Chipwiser Technology Co.Ltd Copyright@2009,Chipwiser Technology Co.Ltd All right reserved Chipwiser Technology 1/9 GENERAL DESCRIPTION CW211 is
2.5 V/3.3 V, 1-Bit, 2-Port Level Translator Bus Switch in SOT-66 ADG3241
2. V/3.3 V, -Bit, 2-Port Level Translator Bus Switch in SOT-66 ADG324 FEATURES FUNCTIONAL BLOCK DIAGRAM 22 ps propagation delay through the switch A B 4. Ω switch connection between ports Data rate. Gbps
2.5 V/3.3 V, 16-Bit, 2-Port Level Translating, Bus Switch ADG3247
V/3.3 V, 16-Bit, 2-Port Level Translating, Bus Switch FEATURES 225 ps Propagation Delay through the Switch 4.5 Switch Connection between Ports Data Rate 1.244 Gbps V/3.3 V Supply Operation Selectable Level
Low Voltage 1.65 V to 3.6 V, Bidirectional Logic Level Translation, Bypass Switch ADG3233
Data Sheet Low Voltage. V to. V, Bidirectional Logic Level Translation, Bypass Switch ADG FEATURES Operates from. V to. V supply rails Bidirectional level translation, unidirectional signal path -lead
DIGITAL ISOLATION AND INTERFACE TECHNOLOGY Selection Guide 2019
DIGITAL ISOLATION AND INTERFACE TECHNOLOGY Selection Guide 209 Visit analog.com/icoupler 2 Digital Isolation and Interface Technology Contents For Safety and Robustness, Choose Analog Devices Digital Isolation
Bourns TBU. High-Speed Protectors Short Form Brochure
Bourns TBU High-Speed Protectors Short Form Brochure Bourns TBU Product Overview Basic TBU Device Operation Bourns TBU high-speed protectors are circuit protection devices constructed using MOSFET semiconductor
STA400EP Enhanced Plastic Dual 2:1 Analog Mux with IEEE
STA400EP Enhanced Plastic Dual 2:1 Analog Mux with IEEE 1149.4 General Description This Dual 2 to 1 Analog Mux with IEEE 1149.4 incorporates many features of the IEEE 1149.4 Test Standard. The device provides
IDTQS3257 QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH QUAD 2:1 MUX/DEMUX DESCRIPTION: FUNCTIONAL BLOCK DIAGRAM FEATURES: APPLICATIONS:
HIGH-SPEED CMOS QUICKSWITCH QUAD :1 MUX/DEMUX FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs Pin compatible with the 7F57, 7FCT57, and
QUICKSWITCH PRODUCTS 2.5V / 3.3V QUAD ACTIVE LOW, HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V / 3.3V QUAD ACTIVE LOW, HIGH BANDWIDTH BUS SWITCH IDTQS3VH125 FEATURES: N channel FET switches with no parasitic diode to VCC Isolation under power-off conditions No DC path to
EM8D-100L EMI FILTER/TVS ARRAY DESCRIPTION DFN-16 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS CIRCUIT DIAGRAM & PIN CONFIGURATION
EMI FILTER/TVS ARRAY DESCRIPTION The is a DFN-16, 8 line low pass filter array with integrated TVS diodes. The is designed to suppress unwanted EMI/RFI signals and provide ESD protection for high-speed
Clock Generator for PowerQUICC and PowerPC Microprocessors and
Freescale Semiconductor Technical Data Clock Generator for PowerQUICC and PowerPC Microprocessors and Microcontrollers Clock Generator for PowerQUICC and PowerPC Microprocessors and DATA SHEET Rev 1, 11/2004
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS 10-BIT BUS SWITCH WITH FLOW-THROUGH PINOUT
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS 10-BIT BUS SWITCH WITH FLOW-THROUGH PINOUT IDTQS361 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs
QUICKSWITCH PRODUCTS 2.5V / 3.3V 8-BIT HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V / 3.3V -BIT HIGH BANDWIDTH BUS SWITCH IDTQS3VH244 FEATURES: N channel FET switches with no parasitic diode to VCC Isolation under power-off conditions No DC path to VCC or GND
QUICKSWITCH PRODUCTS 2.5V / 3.3V 8:1 MUX / DEMUX HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V / 3.3V 8:1 MUX / DEMUX HIGH BANDWIDTH BUS SWITCH IDTQS3VH251 FEATURES: N channel FET switches with no parasitic diode to VCC Isolation under power-off conditions No DC path to
Isolated Linearized RTD Input 5B34 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated Linearized RTD Input 5B34 FEATURES Amplifies, Protects, Filters, and Isolates Analog Input. Linearize a wide variety of 2 & 3 wire RTDs. (True 4-wire RTD measurements are provided by the 5B35).
OBSOLETE
Product Description The PE4237 RF Switch is designed to cover a broad range of applications from near DC to 4 MHz. This reflective switch integrates on-board CMOS control logic driven by a single-pin,
Bourns Electronic Current Limiters
Bourns Electronic Current Limiters TCS & TBU High-Speed Protectors Short Form Brochure Bourns TCS HSP Product Overview Basic TCS HSP Device Operation The Bourns TCS DL Series High-Speed Protector (HSP)
MC FPGA Bridge IC. for. MIPI D-PHY Systems and SLVS to LVDS Conversion DATASHEET. Version August Meticom GmbH
FPGA Bridge IC for MIPI D-PHY Systems and SLVS to LVDS Conversion DATASHEET Version 1.09 August 2016 Meticom GmbH Meticom GmbH Page 1 of 14 Revision History Version Date of Issue Change 1.01 April 25,
IDTQS3VH383 QUICKSWITCH PRODUCTS 2.5V/3.3V 8-BIT HIGH BANDWIDTH BUS EXCHANGE BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V/3.3V 8-BIT HIGH BANDWIDTH BUS EXCHANGE BUS SWITCH IDTQS3VH383 FEATURES: N channel FET switches with no parasitic diode to Vcc Isolation under power-off conditions No DC path to
Wideband Photodiode Receivers
Wideband Photodiode Receivers Features Wide-band analog signal reception Single-mode fiber pigtail High optical return loss Up to 20 GHz bandwidth 1310 nm and 1550 nm sensitivity Applications Antenna remoting
Craft Port Tiny RS-232 Transceiver for Portable Applications ADM101E. Data Sheet FUNCTIONAL BLOCK DIAGRAM
Data Sheet FEATURES 460 kbit/s Transmission Rate Single 5 V Power Supply Compatible with RS-232 Input/Output Levels 0.1 μf Charge Pump Capacitors One Driver and One Receiver On-Board DC-DC Converter ±4.2
1000 MHz 2000 MHz 1000 MHz 2000 MHz 1000 MHz 2000 MHz 1000 MHz 2000 MHz ON Switching Time CTRL to 0.1 db final value, 2 GHz 200 ns
Product Description The PE4245 RF Switch is designed to cover a broad range of applications from near DC to 4 MHz. This switch integrates on-board CMOS control logic with a low voltage CMOS compatible
Company Profile. Union Semiconductor.
Company Profile Who We Are Founded in 001, is a fabless integrated circuit design company, engaged in inventing, designing and marketing high performance linear and mixed-signal integrated circuits (ICs)
POWER SYSTEM MANAGER AND SUPER SEQUENCER SELECTION GUIDE
POWER SYSTEM MANAGER AND SUPER SEQUENCER SELECTION GUIDE Visit analog.com and linear.com 2 Power System Management What is PSM? Power System Management (PSM) adds digital control, telemetry, and black-box
UM3221E/UM3222E/UM3232E
General Description UM3221E/UM3222E/UM3232E Fail-Safe, Single Supply RS-232 Transceivers UM3221E/UM3222E/UM3232E The UM3221E/UM3222E/UM3232E series are 3.3V powered RS-232 transceivers intended for portable
Low Voltage, 10-Bit Digital Temperature Sensor in 8-Lead MSOP AD7314
a FEATURES 10-Bit Temperature-to-Digital Converter 35 C to +85 C Operating Temperature Range 2 C Accuracy SPI and DSP Compatible Serial Interface Shutdown Mode Space-Saving MSOP Package APPLICATIONS Hard
EVAL-ADG79XXEB. Evaluation Boards for the ADG79XX Family of Switches FEATURES GENERAL DESCRIPTION EVALUATION BOARD DIGITAL PICTURE
Evaluation Boards for the ADG79XX Family of Switches EVAL-ADG79XXEB FEATURES Full-featured evaluation boards for the ADG79XX family of switches: ADG79A/ADG79G (Quad : multiplexer) ADG79A/ADG79G (Triple
MC Channel FPGA Bridge IC. for. MIPI D-PHY Systems and SLVS to LVDS Conversion PRELIMINARY DATASHEET. Version August 2014.
MC20901 5 Channel FPGA Bridge IC for MIPI D-PHY Systems and SLVS to LVDS Conversion PRELIMINARY DATASHEET Version 1.06 August 2014 Meticom GmbH Meticom GmbH Page 1 of 17 Revision History MC20901 Version
A4732 DPDT ANALOG SWITCH LOW-POWER, TWO-PORT, HIGH-SPEED, USB2.0 (480Mbps)
DESCRIPTION The is a Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) double pole double-throw (DPDT) Analog Switch featuring an On-Resistance of 4.5 ohm at VCC=3V and a Low On Capacitance 3.7pf Typical.
PESD2CAN CAN BUS ESD PROTECTION DIODE DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
CAN BUS ESD PROTECTION DIODE DESCRIPTION The is designed to protect Controller Area Network (CAN) bus lines and other industrial applications such as DeviceNet Bus lines from the damaging effects of Electrostatic
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUADRUPLE BUS SWITCH WITH INDIVIDUAL ACTIVE LOW ENABLES
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUADRUPLE BUS SWITCH WITH INDIVIDUAL ACTIVE LOW ENABLES IDTQS315 FEATURES: Enhanced N channel FET with no inherent diode to Vcc Pin compatible with the 74 15 function
IDT74FST BIT 2:1 MUX/DEMUX SWITCH
16-BIT 2:1 MUX/DEMUX SWITCH IDT74FST163233 FEATURES: Bus switches provide zero delay paths Low switch on-resistance TTL-compatible input and output levels ESD > 200 per MIL-STD-883, Method 3015; > 20 using
QUICKSWITCH PRODUCTS 2.5V / 3.3V 20-BIT DUAL PORT, HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V / 3.3V 20-BIT DUAL PORT, HIGH BANDWIDTH BUS SWITCH IDTQS3VH1662 FEATURES: N channel FET switches with no parasitic diode to Vcc Isolation under power-off conditions No DC path
Stereo PDM-to-I 2 S or TDM Conversion IC ADAU7002
Data Sheet FEATURES 64 decimation of a stereo pulse density modulation (PDM) bit stream to pulse code modulation (PCM) audio data Slave I 2 S or time division multiplexed (TDM) output interface Configurable
EVALUATION KIT AVAILABLE High-Bandwidth, VGA 2:1 Switch with ±15kV ESD Protection
19-5; Rev ; 1/9 EVALUATION KIT AVAILABLE High-Bandwidth, VGA :1 Switch General Description The integrates high-bandwidth analog switches, level-translating buffers, and level-translating FET switches to
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH QUAD 2:1 MUX/DEMUX
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH QUAD :1 MUX/DEMUX IDTQS357 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs Pin compatible
FAST CMOS OCTAL BUFFER/LINE DRIVER
FAST CMOS OCTAL BUFFER/LINE DRIVER IDT54/74FCT244T/AT/CT FEATURES: Std., A, and C grades Low input and output leakage 1µA (max.) CMOS power levels True TTL input and output compatibility: VOH = 3. (typ.)
MIC2544A/2548A. General Description. Features. Applications. Typical Application. Programmable Current Limit High-Side Switch
Programmable Current Limit High-Side Switch General Description The MIC2544A and MIC2548A are integrated, high-side power switches optimized for low loss DC power switching and other power management applications,
2-wire Serial EEPROM AT24C512. Preliminary. 2-Wire Serial EEPROM 512K (65,536 x 8) Features. Description. Pin Configurations.
Features Low-voltage and Standard-voltage Operation 5.0 (V CC = 4.5V to 5.5V) 2.7 (V CC = 2.7V to 5.5V) 1.8 (V CC = 1.8V to 3.6V) Internally Organized 65,536 x 8 2-wire Serial Interface Schmitt Triggers,
+3.3V V DD NCD+ NCD- NOD+ NOD- MAX14978 NC0+ NC0- NC1+ NC1- NO0+ NO0- NO1+ GND. Maxim Integrated Products 1
19-5573; Rev 1; 4/11 SuperSpeed USB Passive Switch General Description The high-performance, passive analog switch is ideal for switching Hi-Speed USB and SuperSpeed USB data between one source and two
1, 2, 4 and 8-Channel Very Low Capacitance ESD Protectors
1, 2, 4 and 8-Channel Very Low Capacitance ESD Protectors CM1210 Features 1,2,4 and 8 channels of ESD protection Very low loading capacitance (1.0pF typical) ±6 kv ESD protection per channel (IEC 61000-4-2
Isolated, Process Current Output 7B39 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Process Current Output 7B39 FEATURES Interfaces, isolates and filters a 0 V to + 10 V or +1 V to +5 V input signal. Provides an isolated process current output of 0 ma to 20 ma or 4 ma to 20
Isolated Process Current Input 7B32 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated Process Current Input 7B32 FEATURES Interfaces, amplifies and filters a process-current input. Module provides a precision output of either +1 V to +5 V or 0 V to +10 V, linear with temperature.
1000 Base-T, ±15kV ESD Protection LAN Switches
19-0624; Rev 0; 8/06 1000 Base-T, ±15kV ESD Protection LAN Switches General Description The meet the needs of high-speed differential switching. The devices handle the needs of Gigabit Ethernet (10/100/1000)
Isolated Process Current Input with Loop Power 7B35
Isolated Process Current Input with Loop Power 7B35 FEATURES Single-channel signal conditioning current input module that interfaces with two-wire transmitters. Module provides a precision output of either
IDT74CBTLV3257 LOW-VOLTAGE QUAD 2:1MUX/DEMUX BUS SWITCH
LOW-VOLTAGE QUAD 2:1 MUX/DEMUX BUS ITCH LOW-VOLTAGE QUAD 2:1MUX/DEMUX BUS ITCH IDT74CBTLV3257 FEATURES: Functionally equivalent to QS3257 5Ω switch connection between two ports Isolation under power-off
1000 Base-T, ±15kV ESD Protection LAN Switch
19-0841; Rev 0; 6/07 1000 Base-T, ±15kV ESD Protection LAN Switch General Description The meets the needs of high-speed differential switching, including that of Gigabit Ethernet (10/100/1000) Base-T switching
Technical Overview. Key Features
Agilent P94xA/C Solid State PIN Diode Switches P942A 1 MHz to 8 GHz SPDT PIN switch P942C 1 MHz to 18 GHz SPDT PIN switch P944A 1 MHz to 8 GHz SP4T PIN switch P944C 1 MHz to 18 GHz SP4T PIN switch Technical
A4711 SINGLE SPDT ANALOG SWITCH 2.7Ω, LOW-VOLTAGE
DESCRIPTION The is a Single Wide-Bandwidth, fast single-pole double-throw (SPDT) CMOS switch featuring an On-Resistance of 2.7 ohm at VCC=5.0V and wide power supply range from 1.8V to 5.5V. It can be used
±15kV ESD-Protected, Single/Dual/Octal, CMOS Switch Debouncers
19-477; Rev 1; 1/99 ±15k ESD-Protected, Single/Dual/Octal, General Description The are single, dual, and octal switch debouncers that provide clean interfacing of mechanical switches to digital systems.
POWER MANAGEMENT PRODUCTS
SELECTION GUIDE POWER MANAGEMENT PRODUCTS Quick Selection Guide 2014 Rev 0 INTERSIL.COM Intersil Power Management Solutions CONTENTS Integrated FET Switching Regulators... 2 Buck Regulators... 3 Buck-Boost
Enhanced 1:2 VGA Mux with Monitor Detection and Priority Port Logic
EVALUATION KIT AVAILABLE MAX14983E General Description The MAX14983E integrates high-bandwidth analog switches, level-translating buffers, and 5V power switches to implement a complete 1: multiplexer for
USB3740. High Speed Switch for Mobile and Portable Applications USB3740 PRODUCT FEATURES DATASHEET. USB3740 Block Diagram
USB3740 High Speed Switch for Mobile and Portable Applications PRODUCT FEATURES High Speed USB Mux for multiplexing the USB lanes between different functions Switch the USB connector between two different
PI2PCIE2214. PCI Express 2.0, 1-lane, 4:1 Mux/DeMux Switch. Features. Description. Application. Pin Description. Block Diagram.
Features 2 Differential Channel, 4:1 Mux/DeMux PCI Express 2.0 performance, 5.0 Gbps Low Bit-to-Bit Skew, 7ps Max. Low Crosstalk: -23dB@3GHz Low Off Isolation: -23dB@3GHz Operating Range: 1.8V ±10% ESD
LM3526 Dual Port USB Power Switch and Over-Current Protection
LM3526 Dual Port USB Power Switch and Over-Current Protection General Description The LM3526 provides Universal Serial Bus standard power switch and over-current protection for all host port applications.
Two-wire Serial EEPROM Smart Card Modules 128K (16,384 x 8) 256 (32,768 x 8) AT24C128SC AT24C256SC. Features. Description VCC NC
Features Low-voltage and Standard-voltage Operation, V CC = 2.7V to 5.5V Internally Organized 16,384 x 8 and 32,768 x 8 2-wire Serial Interface Schmitt Trigger, Filtered Inputs for Noise Suppression Bi-directional
2-wire Serial EEPROM AT24C512
Features Low-voltage and Standard-voltage Operation 5.0 (V CC = 4.5V to 5.5V). (V CC =.V to 5.5V). (V CC =.V to.v) Internally Organized 5,5 x -wire Serial Interface Schmitt Triggers, Filtered Inputs for
Features. Applications. MIC4126/27/28 Block Diagram
Dual 1.5A-Peak Low-Side MOSFET Drivers in Advanced Packaging General Description The MIC4126, MIC4127, and MIC4128 family are highlyreliable dual 1.5A low-side MOSFET drivers fabricated on Micrel s BiCMOS/DMOS
AN-1055 APPLICATION NOTE
AN-155 APPLICATION NOTE One Technology Way P.O. Box 916 Norwood, MA 262-916, U.S.A. Tel: 781.329.47 Fax: 781.461.3113 www.analog.com EMC Protection of the AD7746 by Holger Grothe and Mary McCarthy INTRODUCTION
Level Translator For SPI and I²C Bus Signals
Level Translator For SPI and I²C Bus Signals APN007 Abstract A serial interface is often used for board-level communication between different integrated circuits, especially in space-constrained applications
QUICKSWITCH PRODUCTS 2.5V / 3.3V 24-BIT HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V / 3.3V 24-BIT HIGH BANDWIDTH BUS SWITCH FEATURES: N channel FET switches with no parasitic diode to Vcc Isolation under power-off conditions No DC path to Vcc or 5V tolerant in
Preliminary Product Overview
Preliminary Product Overview Features 1.0 A per channel / 3.0 A Total Current Maximum Voltage (AC or DC): +150 V Low On-State Resistance < 1.0 Ω 10 GΩ Input to Output Isolation < 10us Switching Time High
MPS4101-6LP Datasheet 50 MHz 25 GHz RoHS-Compliant Control Device QFN SPST PIN
MPS4101-6LP Datasheet 50 MHz 25 GHz RoHS-Compliant Control Device QFN SPST PIN Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA:
Very High-speed CMOS logic for next-generation designs
Very High-speed CMOS logic for next-generation designs NXP VHC/T & XC7 logic Delivering very high speed with low power over an extended temperature range, NXP s VHC/T logic devices are drop-in replacements
LOW-VOLTAGE 10-BIT BUS SWITCH
LOW-VOLTAGE 0-BIT BUS ITCH IDT74CBTLV84 FEATURES: 5Ω A/B bi-directional bus switch Isolation under power-off conditions Over-voltage tolerant Latch-up performance exceeds 00mA VCC =.V -.6V, Normal Range
PCA bit multiplexed/1-bit latched 5-bit I 2 C EEPROM DIP switch
INTEGRATED CIRCUITS Supersedes data of 2001 Jan 12 2003 Jun 27 Philips Semiconductors FEATURES 4-bit 2-to-1 multiplexer, 1-bit latch DIP switch 5-bit internal non-volatile register Override input forces
P0603V24 ULTRA LOW CAPACITANCE ESD PROTECTION COMPONENT DESCRIPTION FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE ESD PROTECTION COMPONENT DESCRIPTION The is an ultra low capacitance ESD component designed to protect very high-speed data interfaces. The device has a typical capactiance of only
LM75 Digital Temperature Sensor and Thermal WATCHDOG with Two-Wire Interface
LM75 Digital Temperature Sensor and Thermal WATCHDOG with Two-Wire Interface General Description The LM75 is a temperature sensor, Delta-Sigma analog-to-digital converter, and digital over-temperature
2-wire Serial EEPROM Smart Card Modules AT24C32SC AT24C64SC
Features Low-voltage and Standard-voltage Operation 5.0 (V CC = 4.5V to 5.5V) 2.7 (V CC = 2.7V to 5.5V) Internally Organized 4096 x 8, 8192 x 8 2-wire Serial Interface Schmitt Trigger, Filtered Inputs
2-wire Serial EEPROMs AT24C128 AT24C256. Features. Description. Pin Configurations. 128K (16,384 x 8) 256K (32,768 x 8)
Features Low-voltage and Standard-voltage Operation 5.0 (V CC = 4.5V to 5.5V) 2.7 (V CC = 2.7V to 5.5V). (V CC =.V to 3.6V) Internally Organized 6,34 x and 32,76 x 2-wire Serial Interface Schmitt Trigger,
Control Devices Surface Mount Input-Limiting Diode Element
GC4212-6LP Datasheet Control Devices Surface Mount Input-Limiting Diode Element Released December 2017 Contents 1 Revision History... 1 1.1 Revision 1.0... 1 2 Product Overview... 2 2.1 Applications...
Two-wire Serial EEPROM 4K (512 x 8) 8K (1024 x 8) AT24C04B AT24C08B. Features. Description. Low-voltage and Standard-voltage Operation 1.
Features Low-voltage and Standard-voltage Operation.8 (V CC =.8V to.v) Internally Organized x 8 (K), or 0 x 8 (8K) Two-wire Serial Interface Schmitt Trigger, Filtered Inputs for Noise Suppression Bidirectional
SGM2020 Low Power, Low Dropout, RF - Linear Regulators
GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power applications.
24AA01/24LC01B. 1K I 2 C Serial EEPROM. Description: Device Selection Table. Features: Package Types. Block Diagram. Part Number.
K I C Serial EEPROM Device Selection Table Part Number Features: Range Max. Clock Frequency Temp. Ranges AA0.7-. 00 khz () I LC0B.-. 00 khz I, E Note : 00 khz for
Isolated, Voltage or Current Input 7B30 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Voltage or Current Input 7B30 FEATURES Interfaces, amplifies and filters unipolar and bipolar millivolt and voltage inputs. Provides a protected precision output of either +1 V to +5 V or 0 V
GC4701-6LP Datasheet RoHS-Compliant Control Devices DC 15 GHz Surface Mount Limiter PIN Diode
GC4701-6LP Datasheet RoHS-Compliant Control Devices DC 15 GHz Surface Mount Limiter PIN Diode Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113
Battery-Voltage. 16K (2K x 8) Parallel EEPROMs AT28BV16. Features. Description. Pin Configurations
Features 2.7 to 3.6V Supply Full Read and Write Operation Low Power Dissipation 8 ma Active Current 50 µa CMOS Standby Current Read Access Time - 250 ns Byte Write - 3 ms Direct Microprocessor Control
Solutions Spotlight Fall 2009
Solutions Spotlight Fall 2009 Skyworks Solutions Skyworks Solutions, Inc. is an innovator of high reliability analog and mixed signal semiconductors. Leveraging core technologies, Skyworks offers diverse
Glass Ceramic ESD Suppressor
Glass Ceramic ESD Suppressor Ideal ESD Suppressor for Ultra High Speed Lines 2014.2 1/19 Contents Development Background Electrical Characteristics Application in Circuit IC Module Mobile RF Antenna TV/STB
Isolated Current Output 5B39 FEATURES APPLICATIONS PRODUCT OVERVIEW
Isolated Current Output 5B39 FEATURES Converts a High-level analog input voltage into a floating proportional output current. Output current of 4 to 20 ma or 0 to 20 ma across loads from 0Ω to 750Ω. High
Union Semiconductor Networking Application Product Overview
Union Semiconductor Networking Application Product Overview 2016, July 24 Corporate Overview Founded Jan, 2001 in Santa Clara Focused on Mixed Signal Integrated Circuit Chips Design, Manufacturing Management,
PCA bit multiplexed/1-bit latched 6-bit I 2 C EEPROM DIP switch
INTEGRATED CIRCUITS I 2 C EEPROM DIP switch Supersedes data of 2002 May 24 2003 Jun 27 Philips Semiconductors PIN CONFIGURATION FEATURES 5-bit 2-to-1 multiplexer, 1-bit latch DIP switch 6-bit internal
BUS SWITCHES PROVIDE 5V AND 3V LOGIC CONVERSION WITH ZERO DELAY. Figure 1. 5V & 3V Logic Mixture in PC Design
BUS SWITCHES PROVIDE 5V AND 3V LOGIC CONVERSION WITH ZERO DELAY APPLICATION NOTE AN-11A ABSTRACT Battery operated computer systems, such as notebook computers, need support logic with a combination of
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LM3525 Single Port USB Power Switch and Over-Current Protection General
PTN3310/PTN3311 High-speed serial logic translators
INTEGRATED CIRCUITS Supersedes data of 2002 Oct 24 2004 Feb 24 FEATURES Meets LVDS EIA-644 and PECL standards 2 pin-for-pin replacement input/output choices: PIN CONFIGURATIONS GND1 1 8 V CC1 LVDS in,
SCAN92LV090 9 Channel Bus LVDS Transceiver w/ Boundary SCAN
9 Channel Bus LVDS Transceiver w/ Boundary SCAN General Description The SCAN92LV090A is one in a series of Bus LVDS transceivers designed specifically for the high speed, low power proprietary backplane
SY55854U. General Description. Features. Functional Block Diagram. Applications. 2 x 2 Protection Crosspoint Switch
2 x 2 Protection Crosspoint Switch General Description The is a fully differential, CML, 2 x 2-crosspoint switch. The non-blocking design allows any input to be connected to any output. Varying the state
Obsolete Product(s) - Obsolete Product(s)
DIFFERENTIAL LVDS CLOCK DRIVER 100ps PART-TO-PART SKEW 50ps BANK SKEW DIFFERENTIAL DESIGN MEETS LVDS SPEC. FOR DRIVER OUTPUTS AND RECEIVER INPUTS REFERENCE VOLTAGE AVAILABLE OUTPUT V BB LOW VOLTAGE V CC
74ABT General description. 2. Features and benefits. 3. Ordering information. Quad 2-input AND gate
Rev. 3 20 November 2015 Product data sheet 1. General description The high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. The is a quad
Product Family Brief. Semtech s AEC-Q100 Qualified TVS. Advanced Circuit Protection Solutions to Safeguard Automotive Interfaces
SEMTECH PROTECTION PRODUCTS Semtech s AEC-Q100 Qualified TVS Advanced Circuit Protection Solutions to Safeguard Automotive Interfaces WWW.SEMTECH.COM Current (I) Product Family Brief The Need for Automotive