SUBSTATION AUTOMATION SYSTEMS

Transcription

1 SUBSTATION AUTOMATION SYSTEMS Engineering Services 2018 SUBSTATION SCADA INDUSTRIAL AUTOMATION TELECOMMUNICATION SECONDARY DESIGN PROTECTION SYSTEMS C O N S U L T A N C Y İDEA GRUBU ELEKTRİK OTOMASYON MÜHENDİSLİK İÇ VE DIŞ TİCARET AŞ Güzelkent Mahallesi 731 Sokak No:18 Etimesgut/ANKARA Telefon: Fax: Einfo@ideamuhendislikcom HAVE BIG IDEAS wwwideamuhendislikcom

2 Substation Automation Systems Substation Automation / Scada Systems design, software engineering and commissioning Monitoring and Reporting Systems of IEC61850 measurement and protection devices Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) Data exchange between Power Plant DCS and Substation SCADA Systems Design and Approval Documents (System Architecture, Data List Signal List, etc) IEC-61850, Modbus RTU / TCP-IP, IEC-101, IEC-103, IEC-104, Profibus Communication Configurations Engineering of: Areva / Alstom / GE Grid, Schnedier, ABB, Motorola, Siemens Products PACiS, DS Agile & Micom Product Family - MicroScada & ABB RTU Family

3 TEİAŞ (NCC) ITM Projects (PRP, IEC-61850) Industrial Automation Systems In accordance with the requirements of TEİAŞ (Turkish Electricity Transmission Co) General Technical and Assembly Specifications, the Substation Automation with the PRP (Parallel Redundancy Protocol) structure having the IEC protocol Scada System Architecture (PRP) More Production Less Consumption Energy monitoring and detailed consumption reporting solutions Network Structure: PRP (Parallel Redundancy Protocol) IEC61850 Scada System design, database engineering and commissioning on site Communication Engineering for Industrial Ethernet Switches, IEC61850 based and PRP Gateway / RTU Engineering for RCC/NCC Scada data communication P2P Tests Preparing of required system design, software issues and installation Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) Automation Products used: Siemens, Schneider, ABB and Rockwell Automation Event Recorder Systems with software and electric project engineering IEDs (Protection Relays, Analyzer, Metering devices, etc) Scada settings Energy-efficient and high-performance server devices with all licenses GPS Time Server Industrial Firewall and Router systems Scada Server-Client database and BCU Engineering UPS (Uninterruptible Power Supply) Siemens Auutomation Family Schneider Controller Family

4 TEİAŞ RTU and Communication System Substation Secondary Drawing Providing the communication requirements between Substations and Scada System of National Control Center Installation and commissioning of SDH, PDH, Multiplexer, Router, Analog and Digital Modems, Pabx Phone Central, etc 380 kv and 154 kv Substation Secondary Projects System Design of Protection, control, measurement, AC / DC distribution RTU (Remote Terminal Unit) System engineering, software, design and installation Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) Leased Line and FSK Modem SDH / PDH Set Multiplexer & Router Set PABX Exchange Secondary Drawing Communication Architecture

5 Reactive Power Data Recording System Power Quality Monitoring System In order to monitor the reactive power support service, the data determined by TEIAS shall be provided by TEIAS in a manner to be determined by TEIAS for the purpose of recording and reporting the information when measured A wide-scale system that provides real-time monitoring of the electric grid, as well as querying and reporting of historical data, by automatically gathering power and power quality data from the grid Power Quality Panel Power Quality Device The power quality analyzer developed allows: For this purpose, the data determined by TEİAŞ are continuously measured and recorded during the time the ancillary services are provided All necessary devices, equipment, hardware and software that will be needed to provide data and reports are provided and installed by us Collection of raw data at samples/sec/channel sampling rate Measurement of power and power quality parameters at resolutions from 3 seconds and 10 minutes, in accordance with IEC , IEC and IEC standards Recording of power quality incidents of voltage peaks, voltage dips and voltage cuts along with raw data for 3-seconds in total In addition to primary frequency control and secondary frequency control, the data to be recorded in relation to the reactive power support service (active output power, reactive output power (generator terminal), busbar voltage busbar voltage setpoint, generator terminal voltage), unless otherwise specified by TEIAS; It will measure at least 1 data per minute and record it with the information when measured Synchronous generator phaser measurement at 100 msn resolution and phaser data concentration in accordance with IEEE C standard Inter-regional oscillation sensing Making of all the measurements through GPS based precise time synchronization (with maximum ±100ns time deviation) Transmission of measurement data to the system center with 1024-bit RSA encryption Storing of all measurement data in a central database

6 Energy & Power Monitoring System Fiber Optic Products (approved by TEİAŞ) Energy Analyzer - Serial Gateway Connections The signals are acquired from energy analyzer, measurement devices and metering devices, to transfer to a central computer to record and see the live values Through these features, it is possible to store the old values and analyze the current status Micom Protection Relays Connection Siemens Protection Relays Connection As stated in the current TEİAŞ ITM Specifications, The Fiber Optic cables used in the Substations must have certain standard and quality certifications Sale of JC Comn fiber optic cables (breakout) are carried out by our company Some TEİAŞ projects using our approved products: ITM155 BELEK GIS ITM159 ATAŞEHİR GIS ITM161 ÇAĞLAYAN GIS ITM184 BURSA GIS ITM206 GÜZYURDU AIS, SAĞMALCILAR BAYRAMPAŞA GIS, OSMANİYE AIS

7 CCTV and IP Phone Exchange Systems Network Engineering & Installation Petkim WPP - IP Based CCTV System Indoor / Outdoor Cabling Applications (Fiber Optic, Copper Ethernet, Serial Cable, Coaxial etc) Fiber Optic cable splice and termination Patch panel, underground splice enclosure, splice cassette, termination equipments OPGW fiber optic splice and termination applications of Substation Electronic Security Systems with high-tech products that can meet every need Collaborations with global brands selected according to market needs IP Based security camera systems installation, testing and commissioning work IP Based telephone exchange installation, testing and commissioning work System devices and large storage units resistant to harsh environmental factors Communication Cabling issues for Power Plants and Substation Automation Systems Network Applications for Bussness Centers, Residence, Hospital, School, Smart Buildings