Bulletin 1492 Programmable Controller Wiring Systems Overview. Digital Relay Expander (16 Outputs) with Fusing

Transcription

1 Bulletin Overview Digital Relay Expander ( Outputs) Digital Relay Expander ( Outputs) with Fusing Relay Expander Cat. No. -XIM-R,-XIM-RF,-XIM-R Relay Masters with Fusing For -point: Cat. No. -XIM-RF, -XIM-RF For -point: Cat. No. -XIM-R Relay expander XIMs feature field-replaceable relays with V or V rated coils. The field-side Form C contacts are rated V A (de-rated to A adjacent pair on the XIM). The Form C relay output provides isolated output channels and a different voltage level from one output channel to the next. Other features include coil-side LED indicating the output module status, and transient suppression on each coil. In addition, a relay expander can have x fuse holders so customers can fuse the output contacts. An expander cable is provided for connection to the mating module. s s Fused Expander Products Cat. No. -XIMF-, -XIMF-- The fusible expander modules feature eight x finger-safe fuse holders, blown fuse indicators, and extra terminals for landing two wires field-side device. They are offered with eight fuse holders for both V and V applications. An expander cable is provided for connection to its mating module. Feedthrough Expander Products Cat. No. -XIMF- The feed-through expander modules feature eight channels with extra terminals for landing two wires field-side device. An expander cable is provided for connection to its mating module. - Preferred availability cat. nos. are bold. Publication A-CAA-EN-P

2 Bulletin Bulletin ControlLogix Modules Relay XIMs and Cables for Bulletin ControlLogix -point and -point Modules RTB Plugs -IAD -IA Bulletin ControlLogix Module Relay Master, LED Indicating Relays -XIM-R X Relays -XIM-R X Relays w/fusing -XIM-RF X Relays -XIM-R X Relays -XIM-R X Relays w/fusing -XIM-RF X High Density Relay Master, LED Indicating Relays - Mechanical -XIMTR-R -RXIMTR-R X -RTB Relays - Solid-State -XIMTS-R -RXIMTS-R X Relay Expander, LED Indicating Relays -XIM-R -RXIM-R -RTB Relays -XIM-R -ch - blown fuse indication -ch - blown fuse indication -XIMF-F- -XIMF-F- -ch -XIMF- To order a Pre-wired Cable, add the appropriate letter from the selection table above to the end of the Cat. No. below..m Cable = -CABLE_.M Cable = -CABLE_.M Cable = -CABLE_.M Cable = -CABLE_ Custom Length Cable = -CABLEXXX_. See Catalog Number Explanation on page - for available Custom Length Codes to replace XXX in Cat. No. Order plugs separately (two plugs catalog number). Plugs are available in screw style and push in style terminal types. To order, replace the in the catalog Can have up to one () expander module depending upon master used (total outputs or less). An extender cable is provided. LED indicating PLC output status The voltage rating is relay control/coil voltage. For relay contact ratings, refer to page -. -IB -IC -IN -IV -OA -OAD -OAE -OA -OB -OBE -OC -ON -OVE Publication A-CAA-EN-P -

3 Bulletin Bulletin CompactLogix Modules Relay XIMs and Cables for Bulletin CompactLogix -Point and -Point Modules RTB Plugs -IAI -IA Bulletin CompactLogix Module Relay Master (LED Indicating) DC Relays -XIM-R E AC Relays -XIM-R H DC Relays -XIM-R E DC Relays w/fusing -XIM-RF E AC Relays -XIM-R H AC Relays w/ fusing -XIM-RF H High Density Relay Master, LED Indicating Relays - Mechanical -XIMTR-R -RXIMTR-R -RTB E Relays - Solid-State -XIMTS-R -RXIMTS-R E Relay Expander (LED Indicating) Expander w/ DC relays -XIM-R -RXIM-R -RTB Expander w/ DC relays -XIM-R -ch w/ blown fuse LED -XIMF-F- -ch w/ blown fuse LED -XIMF-F- -ch Expander -XIMF- To order a Pre-wired Cable, add the Suffix No. from the table above to the end of the Cat. No. below..m Cable = -CAB_.M Cable = -CAB_.M Cable = -CAB_.M Cable = -CAB_ Custom Length Cable = -CABXXX_. See Catalog Number Explanation on page - for available Custom Length Codes to replace XXX in Cat. No. Order plugs separately (two plugs catalog number). Plugs are available in screw style and push in style terminal types. To order, replace the in the catalog In the input module's sink mode only. One expander module is connected to a master to provide a total of outputs. An extender cable is included with each expander to connect it to the master. This IFM is not recommended for use the PLC modules that have an off-state leadkage current exceeding. ma. Use a -IFMDN or - IFMDA- for inputs. Use -IFMD- for outputs. The LED indicates the PLC output status. The voltage rating is relay control/coil voltage. For relay contact ratings, refer to page -. -IQ -IQF -IM -OA -OA -OB -OB -OV -OW -OWI -OW Publication A-CAA-EN-P -

4 Bulletin Bulletin Flex Modules Relay XIMs and Cables for Bulletin Flex -Point and -Point Modules RTB Plugs -IB -IB Bulletin Flex Digital Module Relay Master (LED Indicating) Relays -XIM-R A A A Relays -XIM-R A A Relays w/ fusing -ch Expander -XIM-RF A A Relay Expander (LED Indicating) -XIM-R -RXIM-R -RTB -ch Expander -XIMF-F-... -ch Expander -XIMF- Relay XIMs and Cables for Bulletin Flex -Point and -Point Modules -IBXOB -IV -OB -OBP -OB -OBEP -OV -OVP -OW RTB Plugs Cat. No. Cat. No. Cat. No. Relay Master (LED Indicating) Bulletin Flex Digital Module -IBD -IBXOBP -IB -OBP Digital Cable Cat. No. Suffix Relays -XIM-R B Relays -XIM-R -RXIM-R -RTB B Relays w/ fusing -XIM-RF B Relay Expander (LED Indicating) Relay Expander -XIM-R -RXIM-R -RTB -ch Expander, Blown Fuse LED -XIMF-F- -ch Expander, Blown Fuse LED -XIM-RF -ch -XIMF- To order a Pre-wired Cable, add the Suffix No. from the table above to the end of the Cat. No. below..m Cable = -CAB_.M Cable = -CAB_.M Cable = -CAB_.M Cable = -CAB_ Custom Length Cable = -CABXXX_. See Catalog Number Explanation on page - for available Custom Length Codes to replace XXX in Cat. No. Order plugs separately (two plugs catalog number). Plugs are available in screw style and push in style terminal types. To order, replace the in the catalog Two or three expanders are connected to a master to provide a total of outputs max (depends on PLX module). And extender cable is included with each expander to connect it to the master. One -XIM-RF is to be used with one -XIM-R and -XIM-RF master ( pt. only). The LED indicates the PLC output status. Uses D-Shell Base -TBDS The voltage rating is relay control/coil voltage. For relay contact ratings, refer to page -. Publication A-CAA-EN-P -

5 Bulletin Specifications Analog IFM Specifications Analog IFM Cat. No. Range Max. Current (Per Circuit) [A] Max. Current (Per Module) [A] Dimensions (W x H x D) [in.] Indicator Circuit Current (Nominal) [ma] Label Card Cat. No. -AIFM-, -RAIFM- V DC. x. x. -- -AIFMC-F- V DC. x. x. -- -AIFMI-F- V DC. x. x. -- -AIFMS-, -RAIFMS- V AC/DC. x. x. -- -AIFMTC- V AC/DC. x. x. -- -AIFMCE V AC/DC. x. x. -- -AIFMCE-F V AC/DC. x. x. V DC V DC -- -AIFM-, -RAIFM- V AC/DC. x. x. --, -- -AIFM-F- V DC. x. x. --, -- -AIFM-F- V DC. x. x. -- -AIFM-F- V DC. x. x. -- -AIFMQS V DC. x. x. -- -AIFMPI V DC. x. x. -- -TAIFM-F- V DC. x. x. -- Ships with each module. For spare part, precede the part number with the letter "W." Add. in. to the width dimension for Bulletin -Rxxx modules. Relay Master/Expandable Interface Module Specifications Relay Master/Expandable XIM Cat. No. Range Max. Current (Per Circuit/Per Relay Pair) [A] Max. Current (Per Module) [A] Dimensions (W xh x D) [in.] Indicator Circuit Current (Nominal) [ma] Label Card Cat. No. -XIM-R, -RXIM-R V DC /. x. x. -- -XIM-R V DC /. x. x. -- -XIM-R V AC /. x. x. -- -XIM-R V AC /. x. x. -- -XIM-R, RXIM-R V AC /. x. x. -- -XIM-R V AC /. x. x. -- -XIM-R V DC /. x. x. -- -XIM-RF V DC /. x. x. -- -XIM-R V AC /. x. x. -- -XIM-RF V DC /. x. x. -- -XIM-RF V AC /. x. x. -- -XIMF- V AC/DC /NA. x. x. -- -XIMF-F- V DC /NA. x. x. -- -XIMF-F- V AC /NA. x. x. -- -XIM-RF V AC /. x. x. -- -XIMTR-R, -RXIMTR-R V DC. x. x. -- -XIMTR-R, -RXIMTR-R V DC. x. x. -- -XIMTS-R, -RXIMTS-R V DC.. x. x. -- -XIMTS-R, -RXIMTS-R V DC.. x. x. -- Ships with each module. For spare part, precede the part number with the letter "W." Preferred availability cat. nos. are bold. Publication A-CAA-EN-P -