ZWS-BAF Series. 50W to 300W Single Output Power Supplies, Low Cost & High Reliability Worldwide Use. ZWS-BAF Series 1.
|
|
|
- Edwin Gray
- 5 years ago
- Views:
Transcription
1 ZWS-BAF Series 50W to 300W Single Output Power Supplies, Low Cost & High Reliability Worldwide Use Features 10 Year e-cap Lifetime 5 Year Warranty Convection Cooling Benefits Better Field Reliability Lower Cost of Ownership Easier Use Specification MODEL ZWS50-BAF ZWS75-BAF ZWS100-BAF ZWS150-BAF ZWS300-BAF ITEMS AC Input Voltage range VAC (47-63Hz) DC Input Voltage range VDC Input Current (typical) (1) A 3V model: 0.45/0.25 3V model: 0.7/0.35 3V model: 0.9/0.45 3V model: 1.3/ & 15V models: others: 0.65/0.35 others: 0.95/0.5 others:1.3/0.65 others: 1.9/ /1.9. others:3.6/1/8 Inrush Current - cold start (1) A 15/28 14/ /28 15/ 30 PFHC - All models with Active Power Factor Correction - Designed to meet EN/IEC Power Factor (1) - 3V model: 0.96/0.85 3V model: 0.96/0.85 3V model: 0.96/ /0.93 Input Current (typical) (1) A others: 0.97/0.91 others: 0.97/0.91 others:0.98/ /.8 Temperature Coefficient - <0.02%/ C Hold Up time (Typ) (1) ms 20ms 18ms (typ) at 100Vac & full Load (20ms at 100Vac & 80% load) Leakage Current (3) ma 0.2 / 0.4 max. Remote On/Off - Option ( see table next page ) Cooling - All models are convection cooling Operating Temperature (2) to +70 C, derate linearly to (Convection) -10 C to +70 C, derate linearly to 50% load from 50 C to 70 C 40% load from 45 to 70 C (from 40 C for 12 & 15V models) Operating Temperature (2) (Forced Air) Refer to output derating specifications E-cap lifetime (5) - Up to 10 years; 45 C ambient, 100% full load, 24 hours Storage Temperature C -30 C to +75 C Humidity (non condensing) - Operating: 30-90% RH, Storage: 10-90% RH Withstand Voltage - I/P to Gnd 2kVAC (10mA), I/P to O/P: 3kVAC (10mA), O/P to Gnd: 500VAC (20mA) for 1mn Isolation Resistance Ω >100MΩ at 25 C & 70%RH, Output to Gnd: 500VDC Vibration (non operating) Hz (1 minute sweep), 19.6m/s 2 constant X, Y, Z 1 hour each Shock - <196.1 m/s Safety agency Certifications - UL , CSA , EN , EN50178 (OV II), CE Mark Conducted & Radiated EMI - EN55011 / EN55022-B, FCC-B, VCCI-B Immunity - IEC ; IEC , -3, -4, -5, -6, -8, -11 Weight (Typ) g Size (W x H x D) (4) mm 50 x 26 x x 33 x x 33 x x 37 x x 42 x 180 Warranty yrs 5 (1) 100 / 200VAC Input, nominal output voltage and max. output power (2) Refer to Thermal Specifications & Application Notes (3) 100 / 230VAC input (4) Refer to Outline Drawing (5) Refer to Reliability Data ZWS-BAF Series 1
2 Model Selector Output Output Adjust Max. Max. Output Efficiency Max. Ripple Load Line OCP OVP Model Voltage Range Current Power at 200VAC and Noise Reg. Reg. (A) (V) (V) (V) (A) (W) (%) (mv pk-pk) (mv) (mv) ZWS50BAF > ZWS50BAF > ZWS50BAF > ZWS50BAF > ZWS50BAF > ZWS50BAF > ZWS75BAF > ZWS75BAF > ZWS75BAF > ZWS75BAF > ZWS75BAF > ZWS75BAF > ZWS100BAF > ZWS100BAF > ZWS100BAF > ZWS100BAF > ZWS100BAF > ZWS100BAF > ZWS150BAF > ZWS150BAF > ZWS150BAF > ZWS150BAF > ZWS150BAF > ZWS150BAF > ZWS300BAF (1) 300 (1) > ZWS300BAF (1) 300 (1) > ZWS300BAF (1) 300 (1) > ZWS300BAF (1) (1) > ZWS300BAF (1) (1) > (1) Values given for Convection Cooling: refer to detailed Specifications & Application Notes for 0.7m/s & 1.4m/s Forced Air Option Description Suffix L-Plate and Cover /A L-Plate /L Conformally coated PCB /CO2 Fixed Output Voltage /FV Remote on/off /R Terminal Block /T Terminal Block with L-Plate Terminal Block with L-Plate & Cover /TL /TA /A Option /L Option ZWS-BAF Option Matrix Power /A /L /CO2 /FV /R /T /TL /TA available for & 48V models 50W W W W W ZWS-BAF Series
3 Outline Drawing ZWS50BAF A: 4-3.5mm Ø holes are for customers chassis mounting holes. All must be screwed in order to conform the vibration specification. B: Model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications. Outline Drawing ZWS75BAF A: 4-3.5mm Ø holes are for customers chassis mounting holes. All must be screwed in order to conform the vibration specification. B: Model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications. Outline Drawing ZWS100BAF A: 4-3.5mm Ø holes are for customers chassis mounting holes. All must be screwed in order to conform the vibration specification. B: Model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications. F: Remote On/Off Control Connector (CN52): B2B-XH-AM (J.S.T.) Option Matching Housing: XHP-2 (J.S.T.). Matching Terminal: BXH-001T-P0.6 (J.S.T.) or SXH-001T-P0.6 (J.S.T.) Hand Crimping Tool: YC-110R (J.S.T.) or YRS-110 (J.S.T.) Matching Housing & Terminal --- not included with the product. ZWS-BAF Series 3
4 R Outline Drawing ZWS150BAF A: 4-3.5mm Ø holes are for customers chassis mounting holes. All must be screwed in order to conform the vibration specification. B: Model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications. F: Remote On/Off Control Connector (CN52): B2B-XH-AM (J.S.T.) Option Matching Housing: XHP-2 (J.S.T.). Matching Terminal: BXH-001T-P0.6 (J.S.T.) or SXH-001T-P0.6 (J.S.T.) Hand Crimping Tool: YC-110R (J.S.T.) or YRS-110 (J.S.T.) Matching Housing & Terminal --- not included with the product. Outline Drawing ZWS300BAF ZWS300BAF- 24/ INPUT VAC 4.0A OUTPUT 24 V 14 A 50-60Hz MADE IN JAPAN EHFP A: 4-3.5mm Ø holes are for customers chassis mounting holes. All must be screwed in order to conform the vibration specification. B: Model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications. F: Optiion Model (ZWS300BAF-*/R). Remote On/Off Control Connector (CN52): B2B- XH-AM (J.S.T.) Matching Housing: XHP-2 (J.S.T.). Matching Terminal: BXH-001T-P0.6 (J.S.T.) or SXH-001T-P0.6 (J.S.T.) Hand Crimping Tool: YC-110R (J.S.T.) or YRS-110 (J.S.T.) Matching Housing & Terminal --- not included with the product. 4 ZWS-BAF Series
5 ZWS-BAF Output Derating ZWS-BAF 50 to 150W Models Mounting A, B (1) Load % Ta ( C) Convection 0.7m/s airflow % 100% % 100% % 100% % 100% 60 75% 100% 70 50% 70% ZWS-BAF 300W 12V & 15V Models Mounting A (1) Load % Ta ( C) Convection 1.4m/s airflow % 100% % 100% 50 80% 100% 60 60% 80% 70 40% 60% ZWS-BAF 50 to 150W Models ZWS-BAF 300W 12V & 15V Models ZWS-BAF 300W 24V, 36V & 48V Models Mounting A, B (1) Load % Ta ( C) Convection 0.7m/s airflow 1.4m/s airflow % 100% 100% % 100% 100% 50 88% 100% 100% 60 64% 100% 100% 70 40% 60% 70% ZWS-BAF 300W 24V, 36V & 48V Models Standard Mounting ZWS-BAF 300W all Models Mounting A Mounting B Note: (1) For other Mounting orientations, refer to Detailed Specifications & Application Notes ZWS-BAF 300W all models Input Voltage VAC LOAD % ZWS-BAF Series
6 TDK-Lambda France SAS ZAC des Delaches CS rue Thuillere Villebon Courtaboeuf France Tel: Fax: france@fr.tdk-lambda.com Italy Sales Office Via dei Lavoratori 128/ Cinisello Balsamo (MI) Italy Tel: Fax: info.italia@it.tdk-lambda.com Netherlands info@tdk-lambda.nl TDK-Lambda Germany GmbH Karl-Bold-Strasse Achern Germany Tel: Fax: info.germany@de.tdk-lambda.com Local Distribution TDK-Lambda UK Ltd. Kingsley Avenue Ilfracombe Devon EX34 8ES United Kingdom Tel: +44 (0) Fax: +44 (0) powersolutions@uk.tdk-lambda.com TDK-Lambda Ltd. Kibbutz Givat Hashlosha Israel Tel: Fax: info@tdk-lambda.co.il Russia Technical Support: St Petersburg Tel: +7 (812) Sales: Moscow info@tdk-lambda.ru Austria Sales Office Aredstrasse Leobersdorf Austria Tel: Fax: info.germany@de.tdk-lambda.com Scandinavia Sales Office Valdemarsgade Ringsted Denmark Tel: Fax: info@de.tdk-lambda.com ZWS-BAF Dec13 v7 Switzerland Sales Office Bahnhofstrasse Dietlikon Switzerland Tel: Fax: info@de.tdk-lambda.com ZWS-BAF Series 6
DPX15W Rated Input voltage range 24V nominal input VDC 48V nominal input 18-75VDC. Input Fuse 24V input, 6A Fuse 48V input, 4A fuse
Single and Dual Output 15W Din Rail Mount DC-DC Converters DPX15W Features and Benefits Features CE Approvals Wide Range Input Benefits Easier System Approvals Less Parts to Inventory Single and dual output
Programmable Power Supplies
Programmable Power Supplies EN A lot to offer in 2U: Z + Series high density, highly flexible, many applications 2 Product features Same package size (2U format) for all models Benchtop and rack mounted
Z+ Series. 200W, 400W, 600W and 800W Programmable DC Power Supplies. Z+ Series 1. Model Selector. Minimises system rack height
Z+ Series www.uk.tdk-lambda.com/zplus Features 2U high Built-in USB, RS232 & RS485 Optional LAN, GPIB & isolated analogue programming interfaces Outputs up to 650Vdc Arbitrary function generation 5 year
Programmable Power Supplies
Programmable Power Supplies EMEA - Edition 1 Innovating Reliable Power A lot to offer in 2U: High density, highly flexible, many applications Series 2 Product features Same package size (2U format) for
Inrush Current. specified at 264Vac (63Hz). see How To Create A Product Description for options
uk.tdk-lambda.com/xms500 Medical Industrial Test roadcast Comms Renewable 500W, Configurable, Class I or II C-DC, power supply Features F ready medical isolation (MOPP) Class I / II with level EMC 1U profile
Programmable Power Supplies
Programmable Power Supplies EMEA - Edition 1.1 NEW The next generation has arrived. And it s small and mighty. The family of programmable power supplies sets a new standard for flexible, reliable, AC-DC
PFE-S SERIES Single Output AC-DC Power Module UL / EN60950 Low Voltage Directive CSA C22.2 No Features Model naming method
PFE-SSERIES 2 29 PFE300S PFE300S Specifications Voltage Range (*2)(*5) V AC85-265 Frequency (*2) Hz 47-63 Input Power Factor (min) (*1)(*5) 0.95 Efficiency (typ) (*1) 81 / 83 83 / 85 Current (*1) A 4.0
Features. Regulated Converter. RAC35-G/OF 35 Watt 4 x 2 Open Frame RAC35- SG/OF. AC/DC Converter
Features Regulated Converter Description Universal input -264VAC Efficiency up to 86% Short circuit and over voltage/current protected UL/EN9 certified, CE marked Conformal coated product The RAC35-xxG/OF
SWT SERIES. Features. Model naming method SWT Applications. Conformity to RoHS Directive. Product Line up. Triple Output 30W - 100W SWT A-273
SERIES Triple Output 30W - 100W 65 100 30 40 Features CE marking applicable 100V/200V worldwide-applicable input / Multiple outputs / Super low cost type Applicable to consumer products such as bill discriminator
Series AMEL10-MJZ 10 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (VAC/Hz) FEATURES: Input Voltage (VDC) Max Output wattage (W) Output Voltage (V) Output Current max (A) Maximum
VP ELECTRONIQUE MASSY - Tel
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise Screw Terminal For Optional CE, UL,
AC-DC POWER SUPPLIES UNIVERSAL INPUT, 65 WATT MEDICAL APPLICATIONS MUI65 SERIES
AC-DC POWER SUPPLIES UNIVERSAL INPUT, 65 WATT MEDICAL APPLICATIONS 2MOPP Medical FEATURES Universal Input Range Operating Temperature Range: -25º to 80ºC (with derating) Compact Package: 2.00 3.00 1.16
Model No. ( Single Output ) ATC-3.3S ATC-5S ATC-12S ATC-15S ATC-24S Max Output Wattage (W) 10W 10W 10W 10W 10W VAC or VDC
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise Screw Terminal For Optional CE, UL,
500Watts Medical Single Output
FEATURES Medical 60601-1 3 rd Edition approved U-Channel, End fan and Top fan types available Optional high efficiency OR-ing FET diode Current share function 2 year warranty ELECTRICAL SPECIFICATIONS
Series AME5-CJZ 5 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 000V Continuous Short circuit protection Operating Temp: -2 C to 0 C Energy Star compliant Input: -26V, -6Hz, or 20-0VDC pact
Ripple & Noise (max) (See Note 2) 5V output: 100mVp-p; 12V - 27V outputs: 150mVp-p; 48V output: 200mVp-p
FEATURES 3 Year Warranty 100% Full Load Burn-In Tested Universal AC Input / Full Range Built-In Remote Sense Function Built-In Remote ON/OFF Control Current Sharing up to 2000W (3+1) Forced Air Cooling
MPU-120S Series. Single Output, 180W Compact, U-Channel AC/DC Power Supplies. Key Features:
MPU-120S Series Single, 180W Compact, U-Channel AC/DC Power Supplies Key Features: 180W Power Universal 90-264 AC Power Factor Correction EN 60950 Approved Compact U-Channel Five Single Models Meets EN
Series AME25-JZ 25 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Series AME-JZ I/O Isolation 000VAC Low Ripple and Noise Operating Temp: -0 C to +70 C Over Voltage Protection Over current Protection Up to
12-15VDC (12V±5%) 24-28VDC (24V±5%)
Features Description Universal AC input (85-264VAC) Long 7 year warranty Protections: SCP, OVP, OCP, OTP 1% full load burn-in test DC OK indicator LED with relay contacts cooling by free air convection,
MPO-120S Series. Single Output, 180W Compact, Open Frame AC/DC Power Supplies. Key Features:
MPO-120S Series Single, 180W Compact, Open Frame AC/DC Power Supplies Key Features: 180W Power Universal 90-264 AC Power Factor Correction EN 60950 Approved High Efficiency Five Single Models Meets EN
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A F 150 U S 12 B - Application Package Dimension Output Input Output Output Protection
Series AMEL20-AZ 20 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (/Hz) Input Voltage (VDC) Max wattage (W) Voltage (V) Current max (A) Maximum capacitive load (µf)
Series AME60-MJZ 60 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (VAC/Hz) FEATURES: I/O Isolation VAC Continuous Short circuit protection Input under-voltage protection Low
Note1: Typ. efficiency is 230VAC and full load 12VDC 24VDC 48VDC ms 8ms 16ms 80ms
Features Regulated Converters Universal Input 9-264V Efficiency Up To 86% Short Circuit And Over Voltage/Current Protected UL/EN695 Certified, CE Marked Conformal Coated Product RECOM Connector Set Available
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
Series AMEL20-MAZ 20 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 4000 Energy Star compliant Operating Temp: -40 o C to +70 o C Ultra-small package Over load, Over, Short Circuit Protection Up
Series AME10-VZ 10 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: Picture Coming Soon I/O Isolation 000VAC Continuous Short circuit protection Operating Temp: -0 C to + C Energy Star compliant Input: -VAC,
efo Series Wide range AC/DC Single Output 1000W Rugged Power Supply Electrical Specification for: Telkoor Part Number:
Electrical Specification for: efo1000-124 Series Wide range AC/DC Single Output 1000W Rugged Power Supply Telkoor Part Number: 900-1124-1000 GENERAL SCALE RELEASE DATE 05/08/2012 SHEET 1 OF 6 Rev Level
12-15VDC (12V±5%) 24-28VDC (24V±5%)
Features DIN Rail Description Universal AC input (85-264VAC) Long 7 year warranty Protections: SCP, OVP, OCP, OTP 1% full load burn-in test DC OK indicator LED with relay contacts cooling by free air convection,
Series AMEL5-MAZ 5 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 4000 Operating Temp: -40 C to +80 C or -25 C to +80 C Input: 90-264, 47-440Hz, or 130-370VDC Over load, Over, Short Circuit Protection
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE T A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
CUS150M1 Instruction Manual
BEFORE USING THE POWER SUPPLY UNIT Be sure to read this instruction manual thoroughly before using this product. Pay attention to all cautions and warnings before using this product. Incorrect usage could
GLX40 GLX50 UL EN GLX60 GLX110-B GLX110-C GLX200 GLX140-C GLX140-CF GLX150-C GLX17Q-C GLX17S-C GLX250-CEF GLX250-CF
Power Supplies GL Series: Single & Multi Output Switchers The new GL series provides a broad range of AC/DC power supply solutions that covers power ratings from 25 watts to 500 watts for use in various
POWERSOLVE ELECTRONICS LTD PSL400-XX series Conduction Cooled Power Supply Engineering Specification
POWERSOLVE ELECTRONICS LTD PSL400-XX series Conduction Cooled Power Supply Engineering Specification 1. Scope 2. Electrical Specification 2.1. AC Input Requirements 2.1.1. Input Voltage 2.1.2. Input Frequency
Power Supplies GLX40 GLX50 GLX60 GLX110-B GLX110-C GLX120 GLX140-C GLX140-CF GLX150-C GLX17Q-C GLX17S-C GLX200 GLX250-CEF GLX250-CF
3 Power Supplies GL Series: Single & Multi Output Switchers The new GL series provides a broad range of AC/DC power supply solutions that covers power ratings from 25 watts to 500 watts for use in various
Standards VDE: EN60950; UL1950; C-UL: CSA C22.2 No.234; IEC950; VDE0805
AC/DC Power Supply Multi-output Wide range input for world-wide use (85 264 Vac). This series is a 3ch output model. Features Wide input voltage range: 85-264Vac 110-370Vdc High efficiency & reliability
Improved. Specifications
Improved Specifications Programmable DC Power Supplies 5kW in 2U Built in RS-232 & RS-485 Interface Advanced Parallel Operation Optional Interface: Compliant LAN IEEE488.2 SCPI (GPIB) Multi-drop Isolated
Application Package Dimension Output Input Output Output Protection Option Code Code Power Voltage Quantity Voltage Type (W) (VAC) (VDC)
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE T A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
APM-40 SERIES FEATURES PRODUCT OVERVIEW. Model Selection Guide. Input Specifications. AC/DC Power Module 40W, Industrial & Medical Safety
FEATURES Fully encapsulated Plastic Case 3 Mounting Versions: - PCB Mounting with Solder Pins - Chassis Mounting with Screw Terminals - DIN-Rail Mounting Package Dimension 88.9x63.5x30.0 mm (PCB Version)
Installation Instructions H Series
Installation Instructions H Series ** Important Note Before connecting AC power to the H Series, please verify that the power transformer is correctly terminated as detailed section 6. Failure to do so
MPM-U653-DCF-B M/N: MPM-U653-DCF-B. 650W Medical AC / DC SPECIFICATION FOR SWITCHING POWER SUPPLY. Revision History
SPECIFICATION FOR SWITCHING POWER SUPPLY M/N: Revision History Version Date Change Items Rev. 1.0 July.21. 2017 Established. Page 1 Models & Ratings FEATURES 650W medical power supply with force air cooling.
Standards VDE: EN60950; UL1950; C-UL: CSA C22.2 No.234; IEC950; VDE0805
AC/DC Power Supply Multi-Output Wide range input for world-wide use (85 264 Vac). This series is a 2ch output model. Features Wide input voltage range: 85-264Vac 110-370Vdc High efficiency & reliability
Watts. xppower.com. General. Input. Environmental. EMC & Safety. Output. IT & Medical Approvals. Energy Efficiency Level V, CEC2008 & EISA 2007
AC-DC 85-50 Watts AHM Series IT & Medical Approvals xppower.com Energy Efficiency Level V, CEC008 & EISA 007
MMA-15 series. 15W Medical Grade Ultraminiature Switching Power Supplies. Single / Dual / Triple Outputs. Universal 90 to 264VAC Input
Single / Dual / Triple Outputs Universal 90 to 264VAC Input 3.3VDC to 24VDC Outputs Chassis 3.96 L x 2.16 W x 1.0 H 4,000VAC Input to Output Isolation PCB and Chassis Mount Packages Full Safety Approvals
NEW! ZERO-UP. Control Flexibility for Worldwide Applications 200W/400W/800W. Built-in RS232 & RS485 Interface with GPIB optional.
NEW! ZERO-UP 200W/400W/800W Programmable DC Power Supplies Built-in RS232 & Interface with GPIB optional. Constant Voltage/Constant Current Built-in RS232 & Interface An embedded Microprocessor controller
3000W Programmable Single Output AEK AEK AEK AEK
000W Programmable Single Output Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (0% ~ 05%) High power density 6.W / inch³ Forced current sharing
VER05 Series. xxx Series. 5 Watt. AC-DC Power Supplies. Models & Ratings. Input. Output
5 Watt xxx Series Energy Efficiency Level VI Barrel Jack & USB Versions Interchangeable Mains Connectors Included Universal Input Output Voltages from 5.0 V to 12.0 V Class II Construction Low Cost B R
< 50 A max. (115 VAC) / < 70 A max. (230 VAC)
KEY FEATURES U Bracket Switching Power Supply Universal Input: 90-264 VAC Active P.F.C. Function, PF>0.95 300W Convection without FAN 480W Convection with 18CFM FAN Protections: Over Load / Over Voltage
Improved. Specifications
Improved Specifications GENH Series Programmable DC Power Supplies 750W in 1U Half-Rack Size Built in RS-232 & RS-485 Interface Advanced Parallel Operation Optional Interface: Compliant LAN IEEE488.2 SCPI
Over voltage protection: Output shutdown (V1 only) Weight: 730g
AC/DC Power Supply Multi-Output Wide range input for world-wide use (85 264 Vac). This series is a 2ch output model. Features Wide input voltage range: 85-264Vac 220-370Vdc High efficiency & reliability
40 & 60 Watt Models. Low Leakage Current. EN61000 Compliant. Single & Multiple Outputs. Cover Kits Available
ECM40-60 40 & 60 Watt Models Small Size 2.0 x 4.0 x 1.2 Low Leakage Current Industrial & Medical Approvals Full Load Available Convection Cooled Wide Operating Temperature 0 C to +70 C Level B Conducted
ECF40 Series. 40 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details
40 Watts 40 W Convection Rating 1.5 by 3 Footprint Low 1.1 Profile High Efficiency Medical and ITE pprovals High Power Density Less than 0.15 W No Load Input Power 3 Year Warranty The ECF40 series is designed
Electrical Specification for: efo Wide range AC/DC Single 12V Output 400W Power Supply Telkoor Part Number: CUSTOMER SIZE CAGE CO
Electrical Specification for: efo400-112 Wide range AC/DC Single 12V Output 400W Power Supply Telkoor Part Number: 900-4136-0000 GENERAL SCALE RELEASE DATE PRELIMINARY SHEET 1 OF 5 REVISION HISTORY Rev
Series AMES40-MAZ 40 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model (VAC/Hz) (VDC) Output Voltage (V) Output Current max (A) Efficiency (%) AMES40-3.3SMAZ 90-264/47-440 130-370 3.3
Industrial Power Supplies
50-600 Watt Features Switch mode power supplies for DIN-rail mounting 6 power ranges with 2, 3, 6, 12, 20 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise
EMH Series. 250 W & 350 W Forced-cooled. Industry Standard 3 x 5 x 1.43 Format. IT & Medical (BF) Approvals. 80 V VAC Operation
EMH Series 250 W & 350 W Forced-cooled Industry Standard 3 x 5 x 1.43 Format IT & Medical (BF) Approvals 80 V - 275 VAC Operation Optional ORing Diode (EMH350D Models) Analog & PMBus Signals Options (EMH350)
Max Output Power Voltage. Convection Forced Convection Forced Nom Peak (2) Model Number (1)
C-DC Power Supplies 500 Watts Convection/Forced-cooled Ratings Universal 85-264 VC Input IT & Medical Safety pprovals < 0.5 W Standby Power -40 C to +70 C Operation Remote On/Off 5 V/2 Standby Output 3
Series MPM-815H 150W PFC MEDICAL ATX POWER SUPPLY
50W PFC MEDICAL ATX POWER SUPPLY FEATURES +5V Stand-by and Remote ON/OFF U, 50W convection cooled with ATX Input Active PFC for medical purpose Power good / Power fail signal Thermal protection EN 6060-,
PJ Open Frame Power Supply 12V 100W 1 Phase / PJ-12V100W A
PJ Highlights & Features Universal AC Input (85Vac 264Vac) Low Inrush Current / Low Leakage Current High efficiency and PF factor to conserve energy Conforms to harmonic current IEC/EN 61000-3-2, Class
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A D 100 U S 12 B - Application Package Dimension Output Input Output Output Protection
Constant Voltage Mode
FEATURES: AC Input 1~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP Flicker Free High Operating Ambient Temp.: -3 ~+6 Surge protection: L-N 4KV, L-FG/N-FG 8KV Safety: UL 875 / PSE EMI:
GSP750 Series. 750 Watts. AC-DC Power Supplies. Models & Ratings. Input
C-DC Power Supplies 750 Watts 900 W Peak Power Rating for 100 ms Universal 80-264 VC Input IT & Medical Safety pprovals 1.0 W Standby Power -40 C to +70 C Operation Remote On/Off 5 V/3 Standby Output 3
MVAD040 Series 40W 2" x 4" AC-DC Power Supply Converter
www.murata-ps.com MVAD040 Series DESCRIPTION The MVAD040 series switching power supplies utilize advanced component and circuit technologies to deliver high effi ciency. Designed for Medical, Telecom,
Revision Issue Date Pages Affected A0 08/14/2006 ALL Modify From CP-8120 Specification Rev:ED by Customer given.
REVISION HISTORY Revision Issue Date Pages Affected Description A0 08/14/2006 ALL Modify From CP-8120 Specification Rev:ED by Customer given. 11/06/2006 ALL Rev:A0 CR1 Rescription CUST PN:40012100W A 40012100W
Parameter Condition Min. Typ. Max. Internal Input Filter 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input VAC 3W PCB mount package
Universal input VAC <250mW No load power consumption -25 C to +80 C Operating temperature, with derating
Features Universal input VAC
AC/DC Power Supply Single Output
AC/DC Power Supply Single Output Open frame type power supply with AC input range 85-132 (-SA) and 170-264V (-SB). Simplified circuit design provides high cost effectiveness. Features Wide input voltage
Parameter Condition Min. Typ. Max. Internal Input Filter. nom. Vin = 230VDC 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input VAC 3W PCB mount package
SPECIFICATION. For SWITCHING POWER SUPPLY M/N: MPD-F113-V
SPECIFICTION For SWITCHING POWER SUPPLY M/N: MPD-F113-V Revision History REV. Oct. 1 st 2012 REV. Dec. 6 th 2012 REV. Jun. 4 th 2013 REV. Nov. 25 th 2015 Established Revised EMS performance and added mechanical
Snaptec Australia Pty. Ltd.
KEY FEATURES Universal Input: 90-264 VAC With P.F.C. Function, PF>0.95 Remote ON/OFF Function Current Share Function Power Good Function High Efficiency up to 90~93% Protections: Over Load / Over Voltage
Universal input VAC <150mW No load power consumption
Features Regulated Converter Description Universal input 85-64VAC
Industrial Power Supplies
75-600 Watt Features Switch mode power supplies for DIN-rail mounting 4 power ranges with 3, 6, 12 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise EMI complies
Watts. xppower.com. General. Input. Output. Environmental. EMC & Safety. Compact Size. IT & Medical Approvals.
4- Watts ECM Series Compact Size xppower.com IT & Medical Approvals Convection-cooled Class I and II Construction DC Input Version Available (DCM Series) PoE Isolation Version Available (POE Series) 3
ZWX 180, 240, 300. ZWX Series. Fanless open frame Multiple Output Power Supplies. All specifications are subject to change without notice.
ZWX 80, 0, 300 ZWX Series Fanless open frame Multiple Output Power Supplies ll specifications are subject to change without notice. ZWX 80, 0, 300 Fanless multiple output power supplies - ideal for industrial
VEL05 Series. xxx Series. 5 Watt. AC-DC Power Supplies. Models & Ratings. Input
5 Watt xxx Series Energy Efficiency Level VI Barrel Jack & USB Versions Fixed Mains Connectors Universal Input Output Voltages from 5.0 V to 12.0 V Class II Construction Low Cost B R A N D The VEL05 series
IEC/EN/UL60950 & CE certified, EN55032 Class B
Features Regulated Converter Universal input VAC 4W PCB mount package
ORDERING INFORMATION SEE PAGE 6
400W High Density Medical/Industrial Grade Open Frame Power Supplies Medical Safety Approval 60601-1 3rd Edition 2 MOPP Class 2 for home use medical applications (BSM400) Single output with 5V Auxiliary
KUANTECH (SHEN ZHEN) COMPANY LIMITED KSAFD W1UK
1 GENERAL... 2 1.1 Description... 2 2 INPUT REQUIREMENTS... 2 2.1 Input Conditions... 2 2.2 AC Inrush Current... 2 3 OUTPUT REQUIREMENTS... 2 4 MECHANICAL... 3 4.1 Enclosure And Layout... 3 4.2 Input and
PSC-AC. PSC AC-series W 1 to 3 Outputs. AC-DC Power supply. Input Voltage ranges. Single output ratings. 2-3 outputs ratings
PSC-AC AC-DC Power supply PSC AC-series 100-240W 1 to 3 Outputs Input / Output Wide input voltage ranges. Single outputs from 5 to 48 V. Two to three outputs 5 to 24 V. Operation High efficiency Operating
KS15. Output Current Model Output Current Model Output Current Model 5V 1.0A KS A KS A KS V 0.45A KS A KS
// SERIES Dual Output C/DC Converter 5W-15W 1 15 10 15 5 15 10 Single Output 5 C/DC Converter 5W-15W 1 5 10 Single Output C/DC Converter 5W-15W 1 Features On board type C/DC converter, making full use
Genesys TM. RoHS. Genesys TM Family GEN H 750W Half Rack GEN 1U 750/1500W/2400W Full Rack GEN 2U 3.3/5kW GEN 3U 10/15kW
E C New From TDK-Lambda 2400W in 1U Genesys TM Programmable DC Power Supplies 2.4kW in 1U Built in RS-232 & RS-485 Interface Advanced Parallel Standard New: Auxiliary s 5V & 15V New: RoHS Compliant Optional
VEL05 Series. xxx Series. 5 Watt. AC-DC Power Supplies. Models & Ratings. Input
5 Watt xxx Series Energy Efficiency Level VI Barrel Jack & USB Versions Fixed Mains Connectors Universal Input Output Voltages from 5.0 V to 12.0 V Class II Construction Low Cost BRAND The VEL05 series
Programmable DC Power Supplies 5kW in 2U Built in RS-232 & RS-485 Interface Advanced Parallel Operation Optional Interface: Compliant LAN IEEE488.
Programmable DC Power Supplies 5kW in 2U Built in RS-232 & RS-485 Interface Advanced Parallel Operation Optional Interface: Compliant LAN IEEE488.2 SCPI (GPIB) Multi-drop Isolated Analog Programming The
5 x 8.5 x 1.61 Inch Form Factor. Convection Cooling Rated. Approved to EN Dual Fusing. Current Sharing. Open Frame. Peak Power Capability
The MCC600 Series of open-frame medical power supplies, with its wide universal 85-264 VAC input range, is available at 600 W of output power and a variety of single output voltages. The MCC series is
60 Watt Medical (MWLT)
60 Watt Medical (MWLT) Features 4 x 2 x 1.2 inches Ultra high efficiency > 85% 50-65 W from 1 to 3 outputs Low leakage current < 250 µa Nemko, UL & CSA approvals to IEC60601 EN55022-B, CISPR22-B, FCC Part15
Programmable DC Power Supplies 3.3kW in 2U Built in RS-232 & RS-485 Interface Advanced Parallel Operation Optional Interface: Compliant LAN IEEE488.
Programmable DC Power Supplies 3.3kW in 2U Built in RS-232 & RS-485 Interface Advanced Parallel Operation Optional Interface: Compliant LAN IEEE488.2 SCPI (GPIB) Multi-Drop Isolated Analog Programming
These power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC60 Series of AC-DC open-frame power supplies, with its wide universal 90-264 VAC input range and high power density, is available at 60 W of output power and a variety of single and multiple output
Over voltage protection: Output shutdown Weight: 73g
AC/DC Power Supply Single Output The BW-series is an open frame board with an optional cover. Simplified circuit design enabled cost optimisation and miniaturization. Safety design is applied to UL, CUL
KEPCO GIVES YOU ZERO-UP PROGRAMMABILITY IN AN AFFORDABLE POWER MODULE
146-1915 More than switch mode boxes with wide-range a-c/d-c input power factor correction and current-share capacity... KEPCO GIVES YOU ZERO-UP PROGRAMMABILITY IN AN AFFORDABLE POWER MODULE RKW 300W 92
Environmental. Electrical Specifications at 25 O C E Output Constant Current
12 Watt - Model: Environmental Drive Mode: Constant Current or Constant Voltage Technology: PFC Off-Line Switch Mode : Max. Input Voltage: 120 to 277VAC, 47-63Hz Number of Outputs: One Output Voltages:
Output Current Input Current Max. capacitive Load
AB4S/D Series AC/DC Power Module 4W, Industrial & Medical Safety FEATURES Fully encapsulated Plastic Case 3 Mounting Versions: - PCB Mounting with Solder Pins - Chassis Mounting with Screw Terminals -
Switching Power Supply
Switching Power Supply Miniature, Thin Power Supply to Be Built into Equipment Half the size of OMRON s conventional power supply. PCB-type and connector-type models available. UL, CSA approved. Conforming
SAM Listed LED Optimized Drivers. Environmental. Electrical Specifications at 25 O C E Output Current. Voltage Accuracy
Model: LP96W 480V UL SAM Series Drive Mode: Constant Voltage Technology: PFC Off-Line Switch Mode Power: 96W Max. Input Voltage: 77 to 480VAC, 50/60Hz Voltages: 4VDC Currents: 1000mA - 4000mA Environmental
Environmental. Electrical Specifications at 25 O C E Output Constant Current
17 Watt - LD Series LD Series Model: LD Series Environmental Drive Mode: Constant Current or Constant Voltage Technology: PFC Off-Line Switch Mode : Max. Input Voltage: 100 to 277VAC, 47-63Hz Number of
Instruction Manual. TDK Lambda INSTRUCTION MANUAL
Instruction Manual TDK Lambda BEFORE USING THE PRODUCT Be sure to read this instruction manual thoroughly before using this product. Pay attention to all cautions and warnings before using this product.
PRODUCT SPECIFICATION File: EA-A0601HE-12 Model: SSA-0601HE-12 Date: Apr. 17, 2015
SWITCHING POWER SUPPLY Rev.: A0(+12V/5A) Page: 1 of 5 1.0 Introductions: 2 2.0 AC Input Characteristics: 2 2.1 Input Voltage Rating:. 2 2.2 Input Voltage Range: 2 2.3 Input Frequency: 2 2.4 AC Inrush current:
Series AM1S-Z 1 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Series AM1S-Z Models Single output Model Input Voltage (V) FEATURES: RoHS compliant Operating temperature -4 o C to + 85 o C 4 Pin SIP Package Input
ENGINEERING SPECIFICATION SHEET SPEC. Revision History
SPEC. Revision History Revision Change Information Date No. Description Current version 2010/08/01 1 New revision Initial 2011-1-25 2 Fuse is changed T4.0A 2.0 2011-4-1 3 Add AC adapter external dimension
SPECIFICATION M/N: MPD-F For SWITCHING POWER SUPPLY. Revision History
SPECIFICTION For SWITCHING POWER SUPPLY M/N: MPD-F3- Revision History REV. Jan. 7 th 200 REV. Mar. 4 th 200 REV. Mar. 7 th 200 REV. Mar. 28 th 20 REV. Nov. 25 th 20 REV. Jul. 5 th 202 REV. Jun. 4 th 203
DPS240/12V Dimmable Power Supply Custom LitePad
Rosco s DPS240/12V Dimmable Power Supply is designed to complement larger Custom LitePad installations. The system comes with power supply and controller all pre-wired and ready to integrate with an array