Huawei OceanStor 6800 V3 Converged Storage Interoperability Matrix

Transcription

1 6800 V3 Converged Storage Interoperability Matrix Date: 23/01/2019 Copyright Technologies Co., Ltd. 1

2 Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please contact our local representative office, agency, or customer service center. Technologies Co., Ltd. Address: Industrial Base Bantian, Longgang Shenzhen People's Republic of China Website: Copyright Technologies Co., Ltd All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Technologies Co., Ltd. Trademark Notice and other trademarks are trademarks or registered trademarks of Technologies Co., Ltd. Other trademarks, products, services and company names mentioned are the property of their respective owners. NO WARRANTY THE CONTENTS OF THIS DOCUMENT ARE FOR REFERENCE ONLY AND DO NOT CONSTITUTE ANY FORM OF COMMITMENT. EXCEPT AS REQUIRED BY APPLICABLE LAWS,NO WARRANTIES OF ANY KIND,EITHER EXPRESS OR IMPLIED,INCLUDING BUT NOT LIMITED TO,ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,ARE MADE IN RELATION TO THE CONTENTS OF THIS DOCUMENT.THE INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR FOR LOSS OF PROFIT, DATA, GOODWILL OR ANTICIPATED SAVINGS ARISING OUT OF OR IN CONNECTION WITH THE USE OF THIS DOCUMENT. UNLESS OTHERWISE SPECIFIED, WARRANTY, SERVICE, AND SUPPORT FOR NON-HUAWEI PRODUCTS ARE PROVIDED DIRECTLY TO YOU BY THE PRODUCT MANUFACTURER, SUPPLIER OR PUBLISHER OF THE PRODUCT. HUAWEI MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE NON-HUAWEI 2

3 PRODUCTES. FOR SUPPORT ISSUES REGARDING NON-HUAWEI PRODUCTS, PLEASE CONTACT THE MANUFACTURER OF THE PRODUCT DIRECTLY. HUAWEI DOES NOT PROVIDE SERVICE OR SUPPORT FOR THE NON-HUAWEI PRODUCTS LISTED, BUT DOES NOT PROHIBIT THEM FORM BEING USED TOGETHER WITH HUAWEI S STORAGE PRODUCTS. 3

4 Selections V F V V V V V V G S12100 S12300 S2100 S2200T S2300 4

5 S2300E S2600 S2600T S2900 S3100 S3200 S3900 S5300 S5500 S5500T S5600 S5600T S5800T S5900 S6800 S6800E S6800T S6900 VIS6300 VIS6600 5

6 VIS6600T 6

7 Back-end Arrays Supported by SmartVirtualization The table lists disk arrays supported by the SmartVirtualization feature of storage. No. Remote Storage V V V V F F V V V V V V V V V V3 Working Mode Topology Local Local Version Remarks A/A-A FC 6800 V3 1,2,3,4 A/A-A iscsi 6800 V3 1,2,3,4 A/A-A FC 6800 V3 1,2,4,5 A/A-A iscsi 6800 V3 1,2,4,5 A/A-A FC 6800 V3 1,2,3,4 A/A-A iscsi 6800 V3 1,2,3,4 A/A-A FC 6800 V3 1,2,4,5 A/A-A iscsi 6800 V3 1,2,4,5 A/A-A FC 6800 V3 1,2,3,4 A/A-A iscsi 6800 V3 1,2,3,4 A/A-A FC 6800 V3 1,2,4,5 A/A-A iscsi 6800 V3 1,2,4,5 A/A-A FC 6800 V3 1,2,4,5 A/A-A iscsi 6800 V3 1,2,4,5 A/A-A FC 6800 V3 1,2,4,5 A/A-A iscsi 6800 V3 1,2,4,5 A/A-A FC 6800 V3 1,2,4,5 A/A-A iscsi 6800 V3 1,2,4,5 A/A-A FC 6800 V3 1,2,4,5 A/A-A iscsi 6800 V3 1,2,4,5 1 Set the host type to "Linux" on the remote storage device. 2 The local storage system cannot take over the remote storage device s command device. 3 If the remote storage device version is V100R001C20, the specific version must be V100R001C20SPC200 or later. If the remote storage device version is V100R001C00, the specific version must be V100R001C00SPC200 or later. If the remote storage device versio 7

8 4 When the storage device is used to take over heterogeneous storage virtualization gateways or storage systems with the storage virtualization function, if such gateways or remote storage devices take over other heterogeneous arrays, they are only used for data migration and are not used for long-term takeovers. 5 The remote storage device version must be V300R001C10SPC200 or later. No. Remote Storage G G S S S S S2200T 12 S2200T 13 S S S2300E 16 S2300E 17 S S S2600T 20 S2600T Working Mode Topology Local Local Version Remarks A/A-A FC 6800 V3 1,2,3,4 A/A-A iscsi 6800 V3 1,2,3,4 A/A-A FC 6800 V3 1,2,3,5 A/A-A iscsi 6800 V3 1,2,3,5 A/A-A FC 6800 V3 1,2,3,5 A/A-A iscsi 6800 V3 1,2,3,5 A/A FC 6800 V3 V300R001/V300R002/ A/A FC 6800 V3 V300R001/V300R002/ A/A-A FC 6800 V3 V300R001/V300R002/ A/A-A iscsi 6800 V3 V300R001/V300R002/ A/A-A FC 6800 V3 V300R001/V300R002/ A/A-A iscsi 6800 V3 V300R001/V300R002/ A/A-A FC 6800 V3 V300R001/V300R002/ A/A-A iscsi 6800 V3 V300R001/V300R002/ A/A-A FC 6800 V3 V300R001/V300R002/ A/A-A iscsi 6800 V3 V300R001/V300R002/ A/P-F FC 6800 V3 V300R001/V300R002/ A/P-F iscsi 6800 V3 V300R001/V300R002/ A/A-A FC 6800 V3 V300R001/V300R002/ A/A-A iscsi 6800 V3 V300R001/V300R002/ 3,6,7,8,9 3,6,7,8,9 1,3,7,10,11,12 1,3,7,10,11,12 1,3,7,11,13,14 1,3,7,11,14 1,3,7,10,11,12,15 1,3,7,10,11,12,15 8

9 1 Set the host type to "Linux" on the remote storage device. 2 The local storage system cannot take over the remote storage device s command device. 3 When the storage device is used to take over heterogeneous storage virtualization gateways or storage systems with the storage virtualization function, if such gateways or remote storage devices take over other heterogeneous arrays, they are only used for data migration and are not used for long-term takeovers. 4 The remote storage device version must be V100R001C00SPC009 or later. 5 The remote storage device version must be V100R001C00SPCA00 or later. 6 If the LUN status is not updated automatically on the local storage system, click the "Auto Scan" button on the management page of the local storage system to update it. 7 The local storage system cannot recognize the disk failure on the remote storage device when no service is running. 8 The remote storage device version must be V20L21 or later. 9 Set the host type to "Normal Mode" on the remote storage device. 10 The remote storage device version must be V100R005C30SPC100 or later. 11 Disk enclosures on the remote storage device can go offline only when no service is running. 12 Disable ALUA on the remote storage device. 13 Set port role to "TGT" on the remote storage device. 14 The remote storage device version must be V100R001C02SPC019 or later. 15 When add remote device and use replication function, If the remote storage device version is V200R001, the specific version must be V200R001C00SPC200 or later. If the remote storage device version is V200R002, the specific version must be V200R002C00SPC200 or later. No. Remote Storage 1 S S S S S S S S S S S5500T 12 S5500T 13 S S S5600T Working Mode Topology Local Local Version A/A-A FC 6800 V3 V300R001/V300R002/ A/A-A iscsi 6800 V3 V300R001/V300R002/ A/P-F FC 6800 V3 V300R001/V300R002/ A/P-F FC 6800 V3 V300R001/V300R002/ A/A-A FC 6800 V3 V300R001/V300R002/ A/A-A iscsi 6800 V3 V300R001/V300R002/ A/P-F FC 6800 V3 V300R001/V300R002/ A/P-F iscsi 6800 V3 V300R001/V300R002/ A/P-F FC 6800 V3 V300R001/V300R002/ A/P-F iscsi 6800 V3 V300R001/V300R002/ A/A-A FC 6800 V3 V300R001/V300R002/ A/A-A iscsi 6800 V3 V300R001/V300R002/ A/P-F FC 6800 V3 V300R001/V300R002/ A/P-F iscsi 6800 V3 V300R001/V300R002/ A/A-A FC 6800 V3 V300R001/V300R002/ Remarks 1,6,7,8,9,10,11 1,6,7,8,9,10,11 1,2,4,6,12,13 1,2,4,6,13 1,2,4,6,12,14 1,2,4,6,14 1,2,4,6,12,14 1,2,4,6,14 9

10 16 S5600T 17 S5800T 18 S5800T 19 S S5900 A/A-A iscsi 6800 V3 V300R001/V300R002/ A/A-A FC 6800 V3 V300R001/V300R002/ A/A-A iscsi 6800 V3 V300R001/V300R002/ A/A-A FC 6800 V3 V300R001/V300R002/ A/A-A iscsi 6800 V3 V300R001/V300R002/ 1 The local storage system cannot recognize the disk failure on the remote storage device when no service is running. 2 Set the host type to "Linux" on the remote storage device. 3 When add remote device and use SmartVirtualization function, the remote storage device version must be V100R005C02SPC300 or later. 4 Disk enclosures on the remote storage device can go offline only when no service is running. 5 Disable ALUA on the remote storage device. 6 When the storage device is used to take over heterogeneous storage virtualization gateways or storage systems with the storage virtualization function, if such gateways or remote storage devices take over other heterogeneous arrays, they are only used for data migration and are not used for long-term takeovers. 7 If the LUN status is not updated automatically on the local storage system, click the "Auto Scan" button on the management page of the local storage system to update it. 8 The remote storage device version must be or later. 9 Set the host type to "Linux" and "AVT STATUS" to "Disabled" on the remote storage device. 10 A remote storage device can be taken over by only one local storage system at a time. 11 You need to unmap access LUNs on the remote storage device. 12 Set port role to "TGT" on the remote storage device. 13 The remote storage device version must be V100R001C01SPC025 or later. 14 The remote storage device version must be V100R001C01SPC018 or later. 15 When add remote device and use replication function, If the remote storage device version is V200R001, the specific version must be V200R001C00SPC200 or later. If the remote storage device version is V200R002, the specific version must be V200R002C00SPC200 or later. No. Remote Storage 1 S S6800E 3 S6800E 4 S6800T 5 S6800T 6 S S VIS VIS VIS6600T Working Mode Topology Local Local Version A/P-F FC 6800 V3 V300R001/V300R002/ A/A-A FC 6800 V3 V300R001/V300R002/ A/A-A iscsi 6800 V3 V300R001/V300R002/ A/A-A FC 6800 V3 V300R001/V300R002/ A/A-A iscsi 6800 V3 V300R001/V300R002/ A/A-A FC 6800 V3 V300R001/V300R002/ A/A-A iscsi 6800 V3 V300R001/V300R002/ Remarks,7 2,7,8,9,10,11 2,7,8,9,11 2,7,8,9,12,13,14 2,7,8,9,12,13,14 2,7,8,9,12,13 2,7,8,9,12,13 A/A-A FC 6800 V3 7,8,15,16 A/A-A FC 6800 V3 7,8,15,16 A/A-A FC 6800 V3 7,8,16,17 10

11 1 If the LUN status is not updated automatically on the local storage system, click the "Auto Scan" button on the management page of the local storage system to update it. 2 The local storage system cannot recognize the disk failure on the remote storage device when no service is running. 3 The remote storage device version must be or later. 4 Set the host type to "Linux" and "AVT STATUS" to "Disabled" on the remote storage device. 5 A remote storage device can be taken over by only one local storage system at a time. 6 You need to unmap access LUNs on the remote storage device. 7 When the storage device is used to take over heterogeneous storage virtualization gateways or storage systems with the storage virtualization function, if such gateways or remote storage devices take over other heterogeneous arrays, they are only used for data migration and are not used for long-term takeovers. 8 Set the host type to "Linux" on the remote storage device. 9 Disk enclosures on the remote storage device can go offline only when no service is running. 10 Set port role to "TGT" on the remote storage device. 11 The remote storage device version must be V100R005C02SPC005 or later. 12 When add remote device and use SmartVirtualization function, the remote storage device version must be V100R005C02SPC300 or later. 13 Disable ALUA on the remote storage device. 14 When add remote device and use replication function, If the remote storage device version is V200R001, the specific version must be V200R001C00SPC200 or later. If the remote storage device version is V200R002, the specific version must be V200R002C00SPC200 or later. 15 The version of the remote storage device must be V100R002C02 or later. 16 The local storage system version must be V300R003C20 or later, or V300R006C00 or later. 17 The version of the remote storage device must be V200R003C00SPC800 or later. 11