Specification of Analog MEMS Microphone
|
|
- Luke Turner
- 5 years ago
- Views:
Transcription
1 Specification of Analog MEMS Microphone RoHS Compliance & Halogen Free Waterproof MEMS Microphone Model: SA04BA383-V21 Eng.No:SA Designed By: A a r o n Checked By: E s t e r Approved By: Richard Customer: P/N of Customer: Approved By: Address: NO. 619 Beihai Road, Weifang City, Shandong, China Website: doug_teng@sdxingang.cn Tel: Fax: P.C: Version:A Effective Date:2016/7/2 WISE Page 1/11
2 Revision History Version Prepared By Description Approved By Date A Aaron New Version Released Richard COMPANY PRIVATE DO NOT REPRODUCE FOR OUTSIDE USE WITHOUT WRITTEN PERMISSION Version:A Effective Date:2016/7/2 WISE Page 2/11
3 Contents 1.Introduction Electrical Characteristics Frequency Response Curve TestSetup Measurement Circuit Mechanical Characteristics Weight waterproof Appearance Drawing Application Pickup Tool Pick Location&PCB Solder Pad Layout Recommended Reflow Process Condition Storage Condition Packing Tape Specification Reel Specification Packing Quantity Packing Information Reliability Test Version:A Effective Date:2016/7/2 WISE Page 3/11
4 MEMS Microphone 1. Introduction The SA04B is a new generation Piezoelectric MEMS Microphones. It s the most reliable very-high SNR MEMS microphone for smart phones, wearables and IoT devices. It s also a drop-in replacement for capacitive MEMS microphones. SA04B is inherently waterproof, dustproof, shockproof and particle-resistant making in the most reliable consumer-grade microphone in the industry. 2. Electrical Characteristics Test Condition: V DD =2V, 23+/-2, 55+/-10%R.H., unless otherwise specified. Specification Symbol Test Conditions Min. Typ. Max. Unit Directivity Omni-directional Sensitivity Range S 94dB db Output Impedance Z out 94dB 300 Ω Current Consumption I 94dB 200 ua S/N Ratio SNR 94dB A-Weighted 61 db(a) Operating Voltage V DD V Total Harmonic distortion THD 94dB S=Typ 0.5 % Sensitivity drop S 94dB V DD =3.6V--1.5V 0.5 db Maximum input S.P.L AOP 10% S=Typ, 120 db Power Supply Rejection PSR 100mVpp Square A-weighted -70 db Version:A Effective Date:2016/7/2 WISE Page 4/11
5 3. Frequency Response Curve 4. Test Setup (Sensitivity Test in Anechoic Room) 5. Measurement Circuit Version:A Effective Date:2016/7/2 WISE Page 5/11
6 6. Mechanical Characteristics 6.1 Weight: Less than 0.3g 6.2 Waterproof:IP Appearance Drawing(unit: mm) Item Dimension Tolerance(+/-) Units Length(L) mm Width(W) mm Height(H) mm Acoustic Port(AP) Ø0.20 & Ø mm Pin # Pin Name Type Description 1 Output Signal Output Signal 2 GND Ground Ground 3 GND Ground Ground 4 V DD Power Power Supply 5 GND Ground Ground 6 GND Ground Ground Notes: All dimensions are in millimeter (mm). Tolerance±0.15mm unless otherwise specified. Version:A Effective Date:2016/7/2 WISE Page 6/11
7 7. Application 7.1 Pickup Tool Pick Location& PCB Solder Pad Layout Recommended Pickup Location Recommended Solder Pad Layout 7.2 Recommended Reflow Process Condition Recommend Re-flow Profile, solder reflow <=260 (for 30s Max of peak temperature). Important Notes In order to minimize device damage: 1. Do not boards wash or clean after the reflow process. 2. Do not apply over 0.3Mpa of air pressure into the port hole. 3. Do not expose to ultrasonic processing or cleaning. 4. Do not pull a vacuum over port hole of the microphone. Version:A Effective Date:2016/7/2 WISE Page 7/11
8 7.3 Storage Condition Storage temperature range:-40~ Operating temperature range:-40~ Packing 8.1 Tape Specification Symbol Dimension Minimum Nominal Maximum D P P P L W W W W T Notes All dimensions are in millimeter (mm). Tolerance±0.15mm unless otherwise specified. Version:A Effective Date:2016/7/2 WISE Page 8/11
9 8.2 Reel Specification 7 Reel Dimension(mm) Description Symbol Minimum Nominal Maximum Reel Diameter A Hub Diameter B Hub Hole Diameter C Reel Width(Measured at hub D Arbor Hole E Arbor Hw in mm Diameter F Arbor Slot Width G Reel Description Symbol Dimension(mm) Minimum Nominal Maximum Reel Diameter A Hub Diameter B Hub Hole Diameter C Reel Width(Measured at hub D Arbor Hole E Arbor Hw in mm Diameter F Arbor Slot Width G Notes All dimensions are in millimeter (mm). Version:A Effective Date:2016/7/2 WISE Page 9/11
10 8.3 Packing Quantity 7 Reel Packing 13 Reel Packing 8.4 Packing Information Tape & Reel 7 Qty/reel Weight/reel Reel/Carton Qty/carton Weight full Dimension carton Box Storage Pcs Kg Nos Nos Load(kg) (LxWxH)mm Temp ~3.00 Tape & Reel 13 Qty/reel Weight/reel Reel/Carton Qty/carton Weight full 272 x 159 x 236 Dimension carton Box -10 ~50 Storage Pcs Kg Nos Nos Load(kg) (LxWxH)mm Temp ~ x 276 x ~50 Version:A Effective Date:2016/7/2 WISE Page 10/11
11 9. Reliability Test Item Detail Standard Simulated Reflow (Without Solder) Static Humidity Temperature Shock ESD Sensitivity Random Vibrations Mechanical Shock Operation Life Drop Test Samples for qualification testing require 3 passes 260±5 reflow solder profiles. 2 hours of setting time is required between each reflow profile test. Precondition at +25 for 1 hour. Then expose to +85 with 85% relative humidity for 1000 hours. Finally dry at room ambient for 3±1 hours before taking final measurement. Each cycle shall consist of 30 minutes at -40, 30 minutes at +125 with 5 minutes transition time. Test duration is for 30 cycles, starting from cold to hot temperature. Perform ESD sensitivity threshold measurements for each contact according to MIL-STD-883G, Method for Human Body Model. Identify the ESD threshold levels indicating passage of 8000V Human Body Model. Vibrate randomly along three perpendicular directions for 30 minutes in each direction,4cycles from 20Hz~2000Hz with a peak acceleration 20g. Subject samples to half sine shock pulses (3000g±15% for 0.3ms) in each direction, totally 18 shocks. Subject samples to +125 for 168 hours under full maximum rated voltage. The test was repeated in six directions for three times, Dropped from 1.5m height on to a steel surface, total 18 times and inspected for mechanical damage. Note: Sensitivity should vary within +/-3dB from initial sensitivity after test conditions are performed. ±2 db Version:A Effective Date:2016/7/2 WISE Page 11/11
Specification of Analog MEMS Microphone
Specification of Analog MEMS Microphone RoHS Compliance & Halogen Free Model: SA11BA383-Y21 Eng.No:SA1602007 Designed By: Ester 02.22 Checked By: Richard 02.22 Approved By: Nina 02.22 Customer: P/N of
More informationLow-Noise Bottom Port Piezoelectric MEMS Microphone
Low-Noise Bottom Port Piezoelectric MEMS Microphone Data Sheet PMM-3738-VM1000-R PUI Audio, featuring Vesper s exclusive technology, presents the world s first and only piezoelectric MEMS microphone. The
More informationVM1000 Low Noise Bottom Port Analog Single-Ended Piezoelectric MEMS Microphone
GENERAL DESCRIPTION Vesper presents the world s first piezoelectric MEMS microphone. The provides superior performance and quality in all environments. The is a low noise, high dynamic range, single-ended
More informationOmnidirectional Microphone with Bottom Port and Analog Output ADMP401
FEATURES 4.72 mm 3.76 mm 1.0 mm surface-mount package High SNR of 62 dba Sensitivity of 42 dbv Flat frequency response from 100 Hz to 15 khz Low current consumption of
More information3SM122HZB1VA MEMS Microphone
Product Description The microphones are integrated with specialized pre-amplification ASIC to provide high sensitivity, high SNR output from a capacitive audio sensor. It s packaged for surface mounting
More informationKnowles Acoustics 1151 Maplewood Drive Itasca, IL 60143
Zero Height SiSonic Microphone Specification Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143 1of 10 1. DESCRIPTION AND APPLICATION 1.1 Description Zero Height Surface Mount Silicon Microphone 1.2
More information3SM102EZT13C MEMS Microphone
Product Description The brings excellent performance on the applications of ANC headphone, TWS headset, Beam-forming device and Voice Recognition device by the unique features of tiny package size, flat
More informationSPECIFICATION Of CMOS MEMS Analog Microphone. Model No.: JL-M2417
SPECIFICATION Of CMOS MEMS Analog Microphone ( RoHS Compliance ) : : ISSUED BY J.C 09-27-2012 CHECKED BY APPROVED BY Version 00 Pages 1 / 11 Revision History Version Description Date Author Approved 00
More information3SM102E4T13B MEMS Microphone
MEMS Microphone Product Description The is a monolithic MEMS top performing miniature analog microphone based on CMOS foundry process. By integrating an acoustic transducer and an analog amplifier circuit
More information3SM102E4T12A MEMS Microphone
MEMS Microphone Product Description The is a monolithic MEMS top performing miniature analog microphone based on CMOS foundry process. By integrating an acoustic transducer and an analog amplifier circuit
More informationDigital "Mini" SiSonic TM Microphone Specification - Halogen Free. Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143
Digital "Mini" SiSonic TM Microphone Specification - Halogen Free Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143 Sheet 1 of 11 1. DESCRIPTION AND APPLICATION 1.1 DESCRIPTION Digital "Mini" Surface
More information3SM201KMT1KB MEMS Microphone
MEMS Microphone Product Description The is a monolithic MEMS top performing miniature digital microphone based on CMOS foundry process. By integrating an acoustic transducer and an analog amplifier circuit
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION Analog MEMS Microphone Datasheet SANICO ELECTRONICS CONTENTS 1. General Description... 3 2. Features... 3 3. Application... 3 4. Electrical Characteristics... 4 5. Typical Frequency
More information3SM201KMF0KB MEMS Microphone
Product Description The is a monolithic MEMS top performing miniature digital microphone based on CMOS foundry process. By integrating an acoustic transducer and an analog amplifier circuit followed by
More information3SM102ETT13B MEMS Microphone
MEMS Microphone Product Description The is a single chip top performing miniature analog audio IC based on CMOS foundry process. By integrating an acoustic transducer and an analog amplifier circuit into
More informationAKU342 Bottom port, Analog Silicon MEMS Microphone
Bottom port, Part number(s) Package type Data sheet revision 1.04 6-pin LGA bottom port Release date 10 October 2014 Document number Notes DS28-1.04 Specifications are subject to change without notice.
More informationOmnidirectional Microphone with Bottom Port and Analog Output FEATURES
Omnidirectional Microphone with Bottom Port and Analog Output GENERAL DESCRIPTION The INMP404 * is a high-quality, high-performance, lowpower, analog-output bottom-ported omnidirectional MEMS microphone.
More informationAKU143 Top Port, Analog Silicon MEMS Microphone
AKU143 AKU143 Top Port, Part number(s) Package type AKU143 4-pin LGA top port Data sheet revision 1.01 Release date 12 December 2014 Document number Notes DS37-1.01 AKU143 Specifications are subject to
More informationAKU142 Top Port, Analog Silicon MEMS Microphone
AKU142 AKU142 Top Port, Part number(s) Package type AKU142 Data sheet revision 1.03 4-pin LGA top port Release date 21 October 2014 Document number Notes DS32-1.03 AKU142 Specifications are subject to
More informationUltralow Noise Microphone with Bottom Port and Analog Output FEATURES
Ultralow Noise Microphone with Bottom Port and Analog Output GENERAL DESCRIPTION The ADMP504* is a high performance, very low noise, low power, analog output, bottom-ported omnidirectional MEMS microphone.
More informationKnowles Acoustics 1151 Maplewood Drive Itasca, IL 60143
Enhanced RF Protected Amplified Mini SiSonic Microphone Specification Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143 1 of 10 1. DESCRIPTION AND APPLICATION 1.1 Description Mini Surface Mount Silicon
More informationOmnidirectional Microphone with Bottom Port and Analog Output FEATURES
Omnidirectional Microphone with Bottom Port and Analog Output GENERAL DESCRIPTION The INMP401 * is a high-quality, high-performance, lowpower, analog-output bottom-ported omnidirectional MEMS microphone.
More informationData sheet AKU350 Analog, HD Voice Silicon MEMS Microphone
Page 1 AKU350 Analog, HD Voice Silicon MEMS Microphone AKU350 Data Sheet Package type 5-pad LGA bottom-port, metal lid Document revision 1.2a Document release date 14 November 2016 Document number AKU-AKU350-DS43
More informationData sheet BMU563R Analog, HD Voice Silicon MEMS Microphone
Data sheet Page 1 Data sheet BMU563R Analog, HD Voice Silicon MEMS Microphone BMU563R Data Sheet Package type 5-pad LGA bottom port Document revision 1.01a Document release date 22 February 2017 Document
More informationAKU344 Bottom Port, Analog Silicon MEMS Microphone
AKU344 AKU344 Bottom Port, Part number(s) Package type AKU344 Data sheet revision 1.01 LGA, bottom port, metal lid Release date 12 December 2014 Document number Notes DS36-1.01 AKU344 Specifications are
More informationData sheet AKU151 Analog, Silicon MEMS Microphone
Preliminary Data Sheet AKU151 Page 1 AKU151 Analog, Silicon MEMS Microphone AKU151 Data Sheet Package type Document revision 1.0a 4-pad LGA top port, metal lid Document release date 14 November 2016 Document
More informationThe 5.8mm diameter ROM-2235L-HD-R is designed for extreme fidelity in a compact housing with true 20 Hz to 20 khz performance.
Data Sheet ROM-2235L-HD-R PUI Audio s all-new HD Series microphones use premium-grade FETs and diaphragms for high sensitivity and superior signal-to-noise ratio. Each microphone features GSM buzz-blocking
More informationUltra-Low Noise Microphone with Bottom Port and Analog Output FEATURES
Ultra-Low Noise Microphone with Bottom Port and Analog Output GENERAL DESCRIPTION The INMP504* is a high-performance, very low noise, low power, analog output, bottom-ported omnidirectional MEMS microphone.
More informationData sheet AKU142 Analog, Silicon MEMS Microphone
AKU142 Analog, Silicon MEMS Microphone AKU142 - Data Sheet Package type 4-pad LGA top port, L2L Document revision 1.1a Document release date 29 June 2016 Document number AKU-AKU142-DS32 Technical Reference
More informationData sheet AKU340 Analog, Silicon MEMS Microphone
AKU340 Analog, Silicon MEMS Microphone AKU340 - Datasheet Package type 5-pad LGA, bottom port, metal lid Document revision 1.1a Document release date 29 June 2016 Document number AKU-AKU340-DS26 Technical
More informationMLSEP*** Series. Multilayer Polymer ESD Suppressor. Features. Application. Electrical Characteristics
Features ESD protection for high speed data lines to IEC61000-4-2 ESD contact discharge typical 8KV, max 15KV IEC61000-4-2 ESD air discharge typical 15KV, max 25KV Protect four data lines Flow through
More informationWM7133L. Bottom Port Analogue Silicon Microphone DESCRIPTION FEATURES APPLICATIONS
WM7133L Bottom Port Analogue Silicon Microphone DESCRIPTION The WM7133L is a lo-profile silicon analogue microphone. It offers high Signal to Noise Ratio (SNR) and lo poer consumption and is suited to
More informationData sheet AKU450P/AKU450 Digital, HD Voice Silicon MEMS Microphone
AKU450P/AKU450 Digital, HD Voice Silicon MEMS Microphone AKU450P / AKU450 Data Sheet Package type 5-pad LGA bottom port Document revision 1.03a Document release date 31 May 2017 Document number AKU-AKU450P-DS49
More informationSPECIFICATION. Bulk Acoustic Wave Filter W. DATE September 5, 2014 WISOL. Byun, Kyung-Su. User WISOL CO., LTD.
SPECIFICATION Bulk Acoustic Wave Filter USER USER PART No. WISOL PART No. DOC. No. DATE September 5, 2014 REVISION WISOL Hong, Byung-Chul Byun, Kyung-Su Mun, Gil-Seop ISSUED BY APPROVED BY (R&D) APPROVED
More informationAKU340 Bottom Port, Analog Silicon MEMS Microphone
AKU340 AKU340 Bottom Port, Datasheet Part number(s) Package type AKU340 Data sheet revision 1.03 LGA, bottom port, metal lid Release date 10 October 2014 Document number Notes DS26-1.03 AKU340 Specifications
More informationAKU440 Family Bottom Port, Digital Silicon MEMS Microphones
AKU440 Family AKU440 Family Bottom Port, Part number(s) Package type Data sheet revision 1.0 AKU440, AKU441, AKU442* 5-pin LGA bottom port Release date 06 November 2014 Document number Notes DS46-1.0 AKU440
More informationAKU240 Family Top port, Digital Silicon MEMS Microphones
AKU240 Family AKU240 Family Top port, Part number(s) Package type Data sheet revision 1.01 AKU240, AKU241, AKU242 8-pin LGA top port Release date 23 December 2014 Document number Notes DS45-1.01 AKU240
More information8-line IPAD low capacitance EMI filter and ESD protection in QFN package
Datasheet 8-line IPAD low capacitance EMI filter and ESD protection in QFN package Features 1 QFN 16L 3.3 mm x 1.5 mm (bottom view) 100 Ω Input 1 Output 1 C = 22.5 pf C = 22.5 pf Typical line capacitance
More informationData sheet AKU243 Digital, HD Voice Silicon MEMS Microphone
Page 1 AKU243 Digital, HD Voice Silicon MEMS Microphone AKU243 Data Sheet Package type 8-pad LGA top-port, L2L Document revision 1.1a Document release date 29 June 2016 Document number AKU-AKU243-DS53
More informationHSP051-4M10. 4-line ESD protection for high speed lines. Applications. Description. Features. Benefits. Complies with following standards
4-line ESD protection for high speed lines Datasheet production data Benefits High ESD protection level High integration Suitable for high density boards Figure 1. Functional schematic (top view) I/O 1
More informationF4-(A)HMOE-J098R38-F2124-5P F4-(A)HMOE-J098R38-F2124-5P. High SNR / Narrow Sensitivity. OMNI-DIRECTIONAL Bottom PORT
F4-(A)HMOE-J098R38-F2124-5P F4-(A)HMOE-J098R38-F2124-5P High SNR / Narrow Sensitivity OMNI-DIRECTIONAL Bottom PORT 1. INTRODUCTION F4-(A)HMOE-J098R38-F2124-5P Analog MEMS Microphone Single Mode Bottom
More informationPRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 1 SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
More informationData sheet AKU440 / AKU441 / AKU443 Digital Silicon MEMS Microphones
AKU440 / AKU441 / AKU443 Digital Silicon MEMS Microphones AKU440 / AKU441 / AKU443 Data Sheet Package type 5-pad LGA bottom-port, metal lid revision 1.15a Release date 02 September 2016 Document number
More informationVT-820 VT-820. Temperature Compensated Crystal Oscillator Previous Vectron Model VTM3. Description
VT-820 Temperature Compensated Crystal Oscillator Previous Vectron Model VTM3 VT-820 Description Vectron s VT-820 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine
More informationLAMP UTC/S400-X9-L
Features Popular T-1 round package High luminous power Typical chromaticity coordinates x=0.29, y=0.28 according to CIE1931 Bulk, available taped on reel. The product itself will remain within RoHS compliant
More informationPRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 1 SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
More informationHSP051-4M10. 4-line ESD protection for high speed lines. Datasheet. Features. Applications. Description
Datasheet 4-line ESD protection for high speed lines Features I/O 1 I/O 2 GND 3 I/O 3 I/O 4 1 2 4 µqfn-10l package Functional schematic (top view) 10 9 8 7 5 6 Internal ly not connected GND Internal ly
More informationMP34DT05. MEMS audio sensor omnidirectional digital microphone. Description. Features. Applications. Digital still and video cameras Antitheft systems
MEMS audio sensor omnidirectional digital microphone Datasheet - production data Digital still and video cameras Antitheft systems Features Single supply voltage Low power consumption AOP = 122.5 dbspl
More information2.6 GHz capable, 10 W carrying power (at 2.6 GHz), 50Ω/75Ω impedance and 1 Form C relays
.6 GHz capable, W carrying power (at.6 GHz), 5Ω/75Ω impedance and Form C relays RE RELAYS (ARE)..44..44 mm inch FEATURES Excellent high frequency characteristics (to.6ghz) Surface-mount type also available
More informationAN-100 MEMS Microphone Handling and Assembly Guide
MEMS Microphone Handling and Assembly Guide PURPOSE AND SCOPE This document provides information and general guidelines for handling and assembling boards with InvenSense Micro Electro- Mechanical Systems
More informationP-LED EALP03SXABA0. Lead (Pb) Free Product - RoHS Compliant
Lead (Pb) Free Product - RoHS Compliant Feature Low profile. Uniform color. High flux output. Colorless clear resin. Brightness: 1125 to 2850 mlm at 30mA. Packaged in tubes for use with automatic insertion
More informationCommon Mode Noise Filter. LCFE Series. Description. Features. Applications. 1210mm Size. Source Meter. LCR Meter (3GHz) Source Meter.
Description This specification covers the engineering requirements for both Common Mode Noise Filter (CMF) and ESD Protection, especially high speed differential serial interfaces, such as USB 3., USB
More informationMEMS Micro Joystick Specification Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143
MEMS Micro Joystick Specification Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143 Sheet 1 of 9 1. DESCRIPTION AND APPLICATION 1.1 DESCRIPTION KJ 33000 is an ultra low power MEMS (Micro Electro
More informationPAGE 1/6 ISSUE SERIES Micro-SPDT PART NUMBER R516 X3X 10X R 516 _ 1 0 _
PAGE 1/6 ISSUE 13-08-18 SERIES Micro-SPDT PART NUMBER R516 X3X 10X R516 series: the RAMSES concept merges with the SLIM LINE technology, breaking up the frequency limits of SMT switches : - FULL SMT TECHNOLOGY
More informationSFI Electronics Technology. Super High Network (SHN) Series. Approval Sheet. Customer Information. Part No. : Model No. : Company Purchase R&D
Approval Sheet Customer Information Customer : Part Name : Part No. : Model No. : Company Purchase R&D Vendor Information Name: Part Name Part No. INC. Chip Surge Protection Device (CSPD) Series Lot No.
More information-42±3dB (0dB=1V/Pa at 1 KHz) 2.0V 2.2KΩ MADE BY CHECKED BY APPROVED BY. Revision level Description of changes Changed date
CUSTOMER SPECIFICATIONS WCB-413OM07(PPS CONE) DIMENSIONAL Ø4.0 1.3mm SENSITIVITY -42±3dB (0dB=1V/Pa at 1 KHz) 2.0V 2.2KΩ CUSTOMER MODEL VENDOR CUSTOMER MADE BY CHECKED BY APPROVED BY Revision level Description
More informationPESD0402MS05 Surface Mount Polymeric ESD Suppressor
\ Description polymeric ESD suppressor help protect sensitive electronic equipment against electrostatic discharge (ESD) without distorting data signals. This protection is a result of its ultra-low capacitance
More informationAluminum Electrolytic Capacitors SMD (Chip), High Temperature
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (L x W x H in mm) 25 C VALUE 8 x 8 x 0 to 8 x 8 x 2 Rated capacitance range, C R 0
More informationHSP line ESD protection for high speed lines. Applications. Description. Features. µqfn 4 leads. Benefits. Complies with following standards
2-line ESD protection for high speed lines Datasheet - production data Benefits High ESD robustness of the equipment Suitable for high density boards Complies with following standards MIL-STD 883G Method
More informationTechnical Data Sheet
Technical Data Sheet Product Name:0603-0.55T High Bright Red LED Part Number: Customer: Customer PN: Version: A.2 Date: 2013.01.01 Customer Approval Instituted By: Checked By: Approved By: TEL: 0755-88999559
More informationHSP051-4N10. 4-line ESD protection for high speed lines. Applications. Description. Features. Benefits. Complies with following standards
4-line ESD protection for high speed lines Datasheet production data Benefits High ESD protection level High integration Suitable for high density boards Figure 1. Functional schematic (top view) I/O 1
More informationINPAQ. Specification. MCB0603 Series. Product Name Chip Ferrite Bead Series MCB 0603 Size EIAJ Global RF/Component Solutions
MCB0603 Series Specification Product Name Chip Ferrite Bead Series MCB 0603 Size EIAJ 0603 Chip Ferrite Bead (MCB0603 Series) Engineering Spec. Monolithic inorganic material construction. Closed magnetic
More informationINPAQ. Specification. MCB0603 Series. Product Name Chip Ferrite Bead Series MCB 0603 Size EIAJ Global RF/Component Solutions
MCB0603 Series Specification Product Name Chip Ferrite Bead Series MCB 0603 Size EIAJ 0603 Chip Ferrite Bead (MCB0603 Series) Engineering Spec. 1.Features Monolithic inorganic material construction. Closed
More informationPRODUCT SPECIFICATION
1.0 SCOPE DDR4 DIMM SOCKET This Product Specification covers the 0.85mm centerline gold plated DDR4 DIMM edge card connector for 1.40 ± 0.10 thick memory modules..0 PRODUCT DESCRIPTION.1 PRODUCT NAME AND
More informationPRODUCT SPECIFICATION. MES3050 Rev A Date 11/06/09 T-Flash Memory Card, Push-Push + SIM Card (6-Pin), Push-Pull (2-in-1 Combo Connector).
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the 2-in-1 Combo Connector MES3050 (T-Flash Push-Push + SIM 6-Pin Push-Pull). 2.0 PRODUCT NAME AND PART
More informationLAMP UTC/S400-X9
Features Popular T-1 round package High luminous power Typical chromaticity coordinates x=0.29, y=0.28 according to CIE1931 Bulk, available taped on reel. ESD-withstand voltage: up to 4KV The product itself
More informationLAMP /F2C4-FHNO/R23
1224-15/F2C4-FHNO/R23 Features High luminous power Typical chromaticity coordinates x=0.258, y=0.228 according to CIE1931 Bulk, available taped on Ammo. ESD-withstand voltage: up to 4KV The product itself
More informationESDA7P60-1U1M. High power transient voltage suppressor. Description. Features. Applications. Complies with the following standards:
High power transient voltage suppressor Description Datasheet - production data The ESDA7P60-1U1M is a unidirectional single line TVS diode designed to protect the power line against EOS and ESD transients.
More informationLAMP EALP05RDEWA9. Features. Description. Applications. 1 Revision : 2. Release Date: :39:06.0. Expired Period: Forever
Features Popular 5mm package High luminous power Typical chromaticity coordinates x=0.30, y=0.29 according to CIE1931 Bulk, available taped on reel. The product itself will remain within RoHS compliant
More information3mm Advanced Super Flux LEDs T4C-4PRB
3mm Advanced Super Flux LEDs Lead (Pb) Free Product - RoHS Compliant Feature RoHS compliant. Piranha package. Colorless clear resin. Low thermal resistance Packaged in tubes for Automatic Insertion Equipment.
More informationCharacteristics Symbol Limit Unit IF = 1.5A V F -- IF = 3.0A V F -- VR = 800V I R -- --
GLASS PASSIVATED SURFACE MOUNT BRIDGE RECTIFIERS REVERSE VOLTAGE 800 Volts FORWARD CURRENT 3.0 Ampere GENERAL DESCRIPTION Suitable for AC-to-DC bridge full wave rectification for SMPS, LED lighting, adapter,
More informationHSP061-4M10. 4-line ESD protection for high speed lines. Datasheet. Features. Applications. Description
Datasheet 4-line ESD protection for high speed lines Features I/O I/O 2 GND 3 I/O 3 I/O 4 2 4 µqfn-0l package Functional schematic (top view) 0 9 8 7 5 6 Product status HSP06-4M0 Internal ly not connected
More information"High Frequency Ceramic Solutions"
Page 1 of 5 This filter is associated with Intel Reference Desing Platform: IRE220 General Specifications Part Number 5697CR45A0360 Operating Passband Freq. 5490-5850 MHz Top View Insertion loss (5490-5670MHz)
More informationLAMP /F1C5-1RTA
Features Popular T-1 3/4 round package High luminous power Typical chromaticity coordinates x=0.29, y=0.28 according to CIE1931 Bulk, available taped on reel. ESD-withstand voltage: up to 4KV The product
More informationSignal Relays AXICOM. P1 Relay V23026
P1 Relay V23026 n Directly triggerable with TTL standard modules as ALS, HCT & ACT n Slim line 13.5x7.85mm (0.531x0.309 ) n Switching current 1 A n Bifurcated 1 form C (CO) contact n Immersion cleanable
More informationAUTOMOTIVE MICRO-ISO RELAY FEATURES
AUTOMOTIVE MICRO-ISO RELAY RELAYS...... Compliance with RoHS Directive FEATURES Micro-ISO type terminals Small size: mm(l) mm(w) mm(h). inch(l). inch(l). inch(h) Wide line-up PC board and, Resistor and
More informationData Sheet RIC-4400 RIC-4400 DK: USA: PRC: NL: Version: Page 1 of 13
- DS Page 1 of 13 2 4 5 3 1 Features Generic RIC module for mild gain hearing loss Low vibration high gain 4400 dual receiver Future proof CS8X plug/socket with 8 terminals State-of-the-art receiver housing
More informationMonolithic Amplifier CMA-252LN+ Ultra Low Noise, High IP to 2.5 GHz. The Big Deal
Ultra Low, High IP3 Monolithic Amplifier 50Ω The Big Deal 1.5 to 2.5 GHz Ceramic, Hermetically Sealed, Nitrogen filled Low profile case,.045 high Ultra Low High Gain, High IP3 Class 1B HBM ESD (500V) CASE
More informationPRODUCT SPECIFICATION
1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.
More informationRClamp7524T. Low Capacitance RClamp 4-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 4-Line ESD Protection PROTECTION PRODUCTS Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series
More informationLAMP 6324/F1C9-1LNA. Features. Descriptions. Applications. 1 Revision : 2. LifecyclePhase: Expired Period: Forever
6324/F1C9-1LNA Features 4.8mm round package. High luminous power. Typical chromaticity coordinates x=0.29, y=0.28 according to CIE1931. Bulk, available taped on reel. ESD-withstand voltage: up to 4KV The
More informationPRODUCT SPECIFICATION
Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 1 Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 2 1.0 SCOPE. This specification covers performance, tests
More informationMULTILAYER CHIP VARISTOR. For ESD / Surge Protection. VZ0402 Green Material Series. Size Walsin Technology Corporation
MULTILAYER CHIP VARISTOR For ESD / Surge Protection Size 0402 Series *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_VZ0402 Green Series- V06 Nov. 2005 REVISION HISTORY
More informationSpecification Status: Released
PAGE NO.: 1 of 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against
More information4-Line BUS-Port ESD-Protection - Flow Through Design VBUS054CD-FHI VBUS054CD-FHI-GS
4-Line BUS-Port ESD-Protection - Flow Through Design Features Compact LLP2513-11L package Low package height
More informationCDMSP M Surface Mount TVS Diode Array
*RoHS COMPLIANT Features RoHS compliant* Protects four I/O lines Ultra-low capacitance ~.55 pf ESD protection > kv Surge protection Applications High Definition Multimedia Interface (HDMI) Digital Visual
More informationSLG7NT4505 GreenPAK TM. 1 Hz Interrupt Generator. General Description. Pin Configuration
GreenPAK TM General Description Silego GreenPAK SLG7NT4505 is a low power and small form device. The SoC is housed in a 2mm x 2mm TDFN package which is optimal for using with small devices. Features Low
More informationRClamp7528T. Ultra Low Capacitance TVS Array. PRELIMINARY Features. PROTECTION PRODUCTS - RailClamp Description. Mechanical Characteristics
- RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationLighthouse LEDs. Customer Approval. Product Name High Bright Blue LED. Part Number. Customer. Customer PN. Version.
Technical Data Sheet Product Name 1206 High Bright Blue LED Part Number A-1206UBC Customer Customer PN Version Date Customer Approval Instituted By Checked By: Approved By 1. Features: Package ( L/W/H
More informationRClamp3328P. Low Capacitance RClamp. 8-Line Protection PRELIMINARY
PROTECTION PRODUCTS - RailClamp Description The RClamp provides low voltage ESD protection for high-speed ports. It features a high maximum ESD withstand voltage of ±25kV contact and ±3kV air discharge
More informationZ1SMA4736A Z1SMA4757A
1W Surface Mount Zener Diodes Features For surface mounted applications in order to optimize board space Built-in strain relief Glass passivated junction Low inductance High temperature soldering guaranteed:
More informationPolymer ESD Part Number: ESDS0402S11018 Specification
1. Scope This Specification is applied to ESD Protection, It is designed to protect the high-speed data lines against ESD transients, Low capacitance and fast turn on times make it ideal for data and transmission
More information204-15UTC/S400-X9 InGaN White Water Clear
Features Popular T-1 3/4 round package. High luminous power. Typical chromaticity coordinates x=0.29, y=0.28 according to CIE1931. Bulk, available taped on reel. ESD-withstand voltage: up to 4KV The product
More informationMini PCI Express & msata Connector
09.Mar.2012 Rev. C Mini PCI Express & msata Connector 1 Scope: 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions of MINI PCI
More informationREFLOW SOLDERING AND BOARD ASSEMBLY
MEMS Microphone Handling and Assembly Guide PURPOSE AND SCOPE This document provides information and general guidelines for handling and assembling boards with InvenSense Micro Electro- Mechanical Systems
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description is surge rated diode arrays designed to protect high speed data interfaces. It has been specifically designed to protect sensitive
More informationExceeds IEC level 4 standards: ±25 kv (air discharge) ±10 kv (contact discharge) Notebook, laptop Streaming box
Datasheet Common mode filter with ESD protection for high speed serial interface Features 6.4 GHz differential bandwidth to comply with HDMI 2.1, HDMI 2.0, HDMI 1.4, USB 3.1 Gen 1 and Gen 2, MIPI, display
More informationTechnical Data Sheet 3mm POWER LED
Benefits. High Flux Output.. Low Profile.. Low Thermal Resistance.. Low Power Consumption..The product itself will remain within RoHS compliant version.. ESD-withstand voltage: up to 4KV. Descriptions
More information2 Channel Headset EMI Filter with ESD Protection
2 Channel Headset EMI Filter with ESD Protection Features Two channels of EMI filtering, one for a microphone and one for an earpiece speaker Pi-style EMI filters in a capacitor-resistor-capacitor (C-R-C)
More informationSRV25-4LC ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-10 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
More information