Optic Fiber Comverters DSC POWER, PARADOX EVO, SATEL INTEGRA Buses FIWRE-S-PDS BOX* BOX + DIN35-LOCK* ** BUS supply

Transcription

1 BOX* BOX + DIN35-* Digital modulation 1x SC/PC optical port 2x data BUS 1x relay NO/NC Overvoltage protection Current limiter in supply Working temperature from 40 C to +70 C ORDERING NAME CODE SUPPLY * VDC** -BOX/12* VDC** -BOX/12* VDC** * holders for mounting to DIN35 inclu ded ** BUS supply Connection to the KEYBUS bus of DSC POWER system BUS KEYBUS RED. 1x MM/SM 1 +13,85V M1 M2 system keyboards and modules Connection to the BUS bus of PARADOX EVO system BUS EVO RED. 1x MM/SM 1 +12V M1 M2 system keyboards and modules Connection to the bus of SATEL INTEGRA system BUS INTEGRA +KPD COM. DTM. CKM. DT1 CK1 1x MM/SM 1 M1 COM. DTM. CKM. M2 Compatible system keyboards and modules 1 max. 5/5km (MM/SM) Exp1 Exp2 1/7

2 Description and technical parameters This optic fiber converters for transmission of system buses of alarm systems : DSC POWER, PARADOX EVO, SATEL INTEGRA. Parameter Value Unit Note BUS Overvoltage protections 600 W pulse 10/1000 μs Optics Output optical power 14 to 8 / 10 to 0 dbm SM / MM Sensitivity 31 dbm SM / MM Optical fibres 1x SM 9/125 - SC connectors µm grinding PC 1x MM 50(62.5)/125 - SC conn. µm grinding PC Optical range DSC POWER 5 km SM / MM PARADOX EVO 5 km SM / MM SATEL INTEGRA 5 km SM / MM ATTEN TION: class 1 LASER PRODUCT COM PLIES WITH 21 CFR and DEN E Relay RDW NO/NC contact with max. 125VAC/0.5A or 60VDC/0.3A NO contact closed = communication OK Power Suply Voltage VDC from bus Current at 12VDC Max. 100 ma Protections overvoltage / current 600W-pulse 10/1000 μs/reversible Environment Operational range C temperature of environment Humidity max. 95 (non-condensing) % Mechanical Dimensio ns - w / h / l 110 x 97 x 30 (37) mm (with DIN holder) Parameters Weight typ: 0.2 kg The producer retains the right to change any technical parameters without previous announcement. Recommended topology Panel relay PWR DAT Max. 5km SM / MM * It is recommended to follow a bus topology. Each branch longer than 2m can be a source of disturbing reflections on lines that disrupt compactness of transmitted data. PWR DAT * 2/7

3 73,00 73,00 -S-PDS + DIN35-30,00 -S-PDS Dimension universality REVIZE: Pre-production version Production version 3/7

4 COM TYPE: -BO X/12 COD E: Connection to the KEYBUS bus of DSC POWER system RED BLK YEL GRN Max. 5km SM / MM - 13,85 VDC + RED BLK YEL GRN TYPE: -BO X/12 4/7

5 COM TYPE: -BO X/12 Connection to the BUS bus of PARADOX EVO system RED BLK GRN YEL Max. 5km SM / MM - 12VDC + RED BLK GRN YEL TYPE: -BO X/12 COD E: COD E: /7

6 CO M TYPE: -BO X/12 Connection to the bus of SATEL INTEGRA system COM +KPD DTM CKM DT1 CK1 Max. 5km SM / MM EXPANDER EXPANDER +12V COM DAT - 12VDC + +KPD COM CKM DTM TYPE: -BO X/12 6/7

7 Quick Installation Manual REV: Optoconverters DSC POWER, PARADOX EVO, SATEL INTEGRA buses 1. Mounting Place RDW-PDS to the side of the alarm system. Place TDW-PDS to the side of modules (keyboards, modules...). Mount the converters to either flat surface or DIN35 rail. 2. Connect supply 12VDC between and terminals. Connection of the supply is indicated by the yellow LED POWER switching on. Overvoltage protections are grounded through the terminal. 3. Connect optic fiber terminated by a SC connector (grinding PC). After interconnection of TDW-PDS and RDW-PDS LED switches off. The length of the optical fiber is max. 5km for both SM and MM fiber. Using of more length is not recommended. 4. Connect signal wires Proceed according to the type of alarm system with the pictures on the previous pages. Connect the data lines from the alarm system to TDW- PDS to terminals DATA and. 5. Indications LED PWR - by switching on detects supply LED - by switching on detects relay closure - by switching on detects optics interruption - by switching on detects failure of a remote device LED Rx/Tx1 - data line - red LED Tx blinking data transmission - green LED Rx blinking data reception LED Rx/Tx2 - data line - red LED Tx blinking data transmission - green LED Rx blinking data reception TDW-PDS Tx nm Rx nm RDW-PDS Tx nm Rx nm GROUND DATA < VDC GROUND DATA < VDC DATA Rx/Tx- DATA Rx/Tx- TYPE: -BOX/12 TYPE: -BOX/12 CODE: CODE: RELAY max. 125VAC / 0.5A max. 60VDC / 0.3A WHEN IS - LOCAL DEVICE IN DE-ENERGIZED STATE - REMOTE DEVICE IS IN FAILURE - OPTICS IS CORRUPTED COM AND NC ARE CONNECTED. WHEN IS - LOCAL DEVICE IS POWERED - REMOTE DEVICE IS WORKING - OPTICS IS OK COM AND NO ARE CONNECTED. COM 7/7