Features. Regulated Converters. RP10-AW 10 Watt 1 x1 Single & Dual Output RP10- _AW/_- DC/DC Converter
|
|
- Joleen Carson
- 5 years ago
- Views:
Transcription
1 Features Regulated Converters : wide input voltage range.kv isolation UL0950- certified Efficiency up to 9% Six-sided continuous shield No minimum load required Description The series are wide input voltage range x power / converters. Despite their small size, the converters are fully specified devices with built-in Class A EMC filters, no minimum load, 00V isolation, under-voltage lockout and low ripple/noise figures. The outputs are fully protected against short circuits, overcurrent and overvoltage and can be trimmed over a +/-0% range. The series will find many uses in applications where board space is at a premium as no external components are required. / Converter 0 Watt x Single & Dual Output YEAR w a r r a n t y Selection Guide Part Number Input Output Output Input () Efficiency () Max. Capacitive Voltage Range Voltage Current Current typ. Load [V] [V] [ma] [ma] [%] [µf] RP0-.SAW (,) RP0-05SAW (,) RP0-SAW (,) RP0-5SAW (,) RP0-SAW (,) RP0-8.SAW (,) RP0-5SAW (,) RP0-8SAW (,) RP0-85SAW (,) RP0-8SAW (,) RP0-05DAW (,) 9- ±5 ± ±0 RP0-DAW (,) 9- ± ± 7 89 ±50 RP0-5DAW (,) 9- ±5 ± 8 89 ± RP0-5DAW (,) 8-75 ±5 ± ±0 RP0-8DAW (,) 8-75 ± ± 89 ±50 RP0-85DAW (,) 8-75 ±5 ± 89 ± Model Numbering Note: Measured at nominal input voltage and full load Input Voltage Output Voltage Single or Dual RP0- _AW/_- Package () CTRL Logic () UL0950- Certified E98 Ordering Examples RP0-05SAW/P = V Input, 5V Output, Positive Logic CTRL pin and Trim pin fitted RP0-5DAW/XC-HC = 8V Input, ±5V Output, without CTRL pin, with fitted Heat-sink RP0-5SAW/N = V Input, 5V Output, Negative Logic CTRL pin and Trim pin fitted Note: standard part is with suffix P for positive logic (=ON, 0=OFF) and trim pin add suffix N instead for negative logic (0=ON, =OFF) and trim pin or add suffix XC instead for no CTRL pin Note: add suffix -HC for premounted Heat-sink with clamps REV.: /08 PD-
2 BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Internal Input Filter Input Voltage Range Input Surge Voltage Under Voltage Lockout (UVLO) Input Reflected Ripple Current Output Voltage Trimming () Single Output nom. Vin = V nom. Vin = 8V Vin = V, s max. Vin = 8V, s max. Vin = V Vin = 8V.Vout, Vout Others Minimum Load 0% Start-up time ON/OFF Control (5) Power up ON/OFF CTRL Positive Logic Negative Logic 9V 8V V 8V 8V V 0mAp-p Pi-Type V 75V 50V 00V 9V 8V ±0.0% -0.0% to +0.0% 0ms 0ms Open or.0 < Vr < 5V Short or 0 < Vr <.V Short or 0 < Vr <.V Open or.0 < Vr < 5V Input Current of CTRL Pin -0.5 ma.0ma Standby Current.5mA Internal Operating Frequency 97kHz 0kHz khz Ripple and Noise 0MHz BW, with a 0µF/5V X7R 0 MLCC.Vout, 5Vout Vout, 5Vout 0mVp-p 0mVp-p 0MHz BW, with a µf/50v X7R 0 MLCC Vout 0mVp-p Note: Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external resistor between the Trim pin and either +Vout pin or -Vout pin Note5: The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to -Vin pin. If suffix XC is specified, the control pin will be omitted RP0-05SAW Efficiency vs. Output Current Efficiency vs. Input Voltage Efficiency [%] Vin Vin Vin Efficiency [%] Output Current [%] Input Voltage [V] PD- REV.: /08
3 External Output Trimming Output Voltage Trimming Single output Powerline converters offer the feature of trimming the output voltage over a certain range around the nominal value by using external trim resistors. No general equation can be given for calculating the trim resistors, but the following trimtables give typical values for chosing these trimming resistors. If voltages between the given trim points are required, extrapolate between the two nearest given values to work out the resistor required or use a variable resistor to set the output voltage. TRIM UP TRIM DOWN 5 RU RD RP0-xx.SAW 5 Vout = Volts = kohms Trim down % Vout = Volts = kohms RP0-xx05SAW Vout = Volts = kohms Trim up % Vout = Volts = kohms Trim down % Vout = Volts = kohms RP0-xxSAW Vout = Volts = kohms Trim down % Vout = Volts = kohms RP0-xx5SAW Vout = Volts = kohms Trim up % Vout = Volts = kohms Trim down % Vout = Volts = kohms REV.: /08 PD-
4 RP0-xxSAW Vout = Volts = kohms Trim up % Vout = Volts = kohms Trim down % Vout = Volts = kohms REGULATION Output Voltage Accuracy ±.0% Line Voltage Regulation Load Voltage Regulation low line to high line Single Dual 0% to 00% load Single Dual 0% to 90% load Single Dual Cross Regulation asymmetrical 5%<>00% load ±5.0% ±0.% ±0.5% ±0.% ±.0% ±0.% ±0.8% Transient Response 5% load step change recovery time 50μs typ. PROTECTION Short Circuit Protection (SCP) Over Voltage Protection (OVP) Over Load Protection (OLP) Isolation Voltage Zener Diode Clamp tested for minute.vout 5Vout Vout 5Vout Vout I/P to O/P I/P (O/P) to case continuous, automatic recovery.7-5.v. - 7.V.5-9.V V V Hiccup mode, 50% of rated Iout typ..kv.0kv Isolation Resistance tested with 500V GΩ min. Isolation Capacitance 500pF max. Note: This power module is not internally fused. An input line fuse must always be used. Recom suggests: Vin= TA; 8Vin= TA, slow blow types ENVIRONMENTAL Operating Temperature Range Maximum Case Temperature Temperature Coefficient without derating with derating -0 C to +78 C -0 C to +00 C +05 C ±0.0%/ C max. PD- REV.: /08
5 Thermal Impedance Operating Humidity Thermal Shock Vibration natural convection 0.m/s (0LFM) 8. C/W 5.8 C/W 5% - 95% RH according to MIL-STD-80F according to MIL-STD-80F MTBF according to MIL-HDBK-7F, G.B. +5 C 7 x 0 hours Derating Graph (7) RP0-05SAW RP0-05SAW-HC Output Power [%] Output Power [%] Ambient Temperature [ C] Ambient Temperature [ C] Note7: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part number not shown here please contact our technical support service at techsupportat@recom-power.com SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Standard Information Technology Equipment, General Requirements for Safety E98 UL0950- st. Ed.: 00 C. No st. Ed.: 00 EMC Compliance Condition Standard / Criterion Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement (8) without external filter with external filter EN550, Class A EN550, Class B ESD Electrostatic discharge immunity test Air ±8kV and Contact ±kv EN000--, Criteria A Radiated, radio-frequency, electromagnetic field immunity test 0V/m EN000--, Criteria A Fast Transient and Burst Immunity (9) ±kv EN000--, Criteria A Surge Immunity (9) ±kv EN000--5, Criteria A Immunity to conducted disturbances, induced by radio-frequency fields Vr.m.s EN000--, Criteria A Power Magnetic Field Immunity 00A/m continuous, 000A/m s EN000--8, Criteria A Note8: See filter suggestions below. RP0-05SAW meets EMI Class B without external components Note9: An external input filter capacitor is required if the module has to meet EN000--, EN The filter capacitor Recom suggests: Nippon chemi-con KY series, 0μF/00V EMI Filtering Class B Input Fuse C +VIN -VIN +VOUT -VOUT LOAD Input Fuse C +VIN -VIN +VOUT GND -VOUT LOAD LOAD MODEL RP0-xxS_DAW RP0-8xxS_DAW C.8μF/50V 8 MLCC.7μF/00V 8 MLCC REV.: /08 PD-5
6 DIMENSIONS ANDPHYSICAL CHARACTERISTICS Parameter Type Value Material Package Dimensions (LxWxH) Package Weight Dimension Drawing without heat sink (mm) Case Base Potting Copper Alloy C FR PCB Epoxy (UL9-V0) 5. x 5. x 9.9mm. x 5. x.5mm.5g g x = 0. Ø.0 ±0. Recommended Footprint Details Bottom View 7. 5 Top View 5 Pin Connections Pin # Single Dual XC +Vin +Vin +Vin -Vin -Vin -Vin CTRL () CTRL () no Pin +Vout +Vout +Vout 5 Trim Com Com -Vout -Vout -Vout Pin Pitch Tolerance ±0.5mm Pin dimension tolerance ±0.mm XX.X ± 0.5mm XX.XX ± 0.5mm PD- REV.: /08
7 Dimension Drawing with heat sink (mm) Top View Heat-sink Pin Connections 9.9 Pin # Single Dual XC-HC x = 0. Bottom View Ø.0 ±0. Recommended Footprint Details 5 Top View 5 +Vin +Vin +Vin -Vin -Vin -Vin CTRL () CTRL () no Pin +Vout +Vout +Vout 5 Trim Com Com -Vout -Vout -Vout Pin Pitch Tolerance ±0.5mm Pin dimension tolerance ±0.mm XX.X ± 0.5mm XX.XX ± 0.5mm PACKAGING INFORMATION Parameter Type Value Packaging Dimensions (LxWxH) Packaging Quantity Storage Temperature Range Storage Humidity Tube Tray Tube Tray 57.0 x.5 x 9.0mm 0.0 x.0 x 8.0mm 8pcs 0pcs -55 C to +5 C 5% - 95% RH The product information and specifications may be subject to changes even without prior written notice.the product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. REV.: /08 PD-7
4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 89% Six-Sided Continuous Shield
Features Regulated Converters 4:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 89% Six-Sided Continuous Shield Description The series wide range input / converters are certified to
More information4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Over Current and Over Voltage Protection No Minimum Load Required
Features Regulated Converters 4:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Over Current and Over Voltage Protection No Minimum Load Required Description The wide range input
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Fixed Operating Frequency Six-Sided Continuous Shield
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Fixed Operating Frequency Six-Sided Continuous Shield Description The series / converters are certified
More informationPackage (4) Control Logic (3)
Features Regulated Converters 2:1 Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Fixed Operating Frequency Description The series / converters are certified
More information4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 84% Fixed Operating Frequency Six-Sided Continuous Shield
Features Regulated Converters 4:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 84% Fixed Operating Frequency Six-Sided Continuous Shield Description The series wide input range / converters
More information2:1 Input Voltage Range 2.25kVDC Isolation UL Certified Efficiency up to 88% Ultraminiature Open Frame SMD No Minimum Load Required
Features Regulated Converters Description 2:1 Input Voltage Range 2.25kV Isolation UL Certified Efficiency up to 88% Ultraminiature Open Frame SMD No Minimum Load Required The RP15-SOF series, are SMD
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM40-G)
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to % Six-Sided Continuous Shield Available as Power Module (RPM-G) Description The series / converters are
More informationPOWERBOX Industrial Line PMR20W Series 20W 4:1 Single and Dual Output High Performance DC/DC Converter
Features 2250VDC input to output isolation Standard 2.00 x 1.00 x 0.40 inch Six-sided continuous shield UL60950-1, EN60950-1, & IEC60950-1 safety approvals Compliance to EN50155 and en45545-2 railway standard
More informationPackaging (5) Protection (3) Isolation Voltage (4)
Features Regulated Converters Regulated output with internal linear regulator Isolated.5W power in SMD package Up to 2kVDC isolation Industry standard pinout -4 C to + C operating temperature IEC/EN/UL62368-1
More informationRO- S/_ Protection (3) Isolation Option (4) Single
Features Unregulated Converters Industry standard pinout 1kVDC or 2kVDC isolation UL94 V- package material Fully encapsulated Efficiency up to 85% DC/DC Converter Description The DC/DC converters are typically
More informationProtection (3) alternative Pinning Option (4) Single or Dual
Features Unregulated Converters Description Pot-core transformer - separated windings high.2kvdc basic isolation in compact size Optional continuous short circuit protection Efficiency up to 82% Pin compatible
More informationPackaging (4) Isolation Voltage (3) nom. Output Voltage
Features Unregulated Converters 1W Power in SMD package Pin compatible with R1D series -40 C to +95 C operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1
More informationRM- S/_ Protection (3) Isolation Option (4) Single
Features Unregulated Converters Single output rail Industry standard pinout 1kVDC or 2kVDC/1s basic isolation High efficiency for low power applications UL94V- package material Optional continuous short
More informationIEC/EN/UL60950 & CE certified, EN55032 Class B
Features Regulated Converter Universal input VAC 4W PCB mount package
More informationFDC20-48 S 05 W - HC PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FDC20-48 S 05 W - HC Series Name Input Output Output Input Assembly Option Voltage Quantity
More informationSeries Specifications Ta= 25 C, nom. Vin, full load and after warm-up unless otherwise stated) Parameter Condition Min. Typ. Max.
Features Regulated Converter Universal input VAC 4W PCB mount package
More informationParameter Condition Min. Typ. Max. Internal Input Filter. nom. Vin = 230VDC 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input VAC 3W PCB mount package
More informationFeatures. Regulated Converter. RAC35-G/OF 35 Watt 4 x 2 Open Frame RAC35- SG/OF. AC/DC Converter
Features Regulated Converter Description Universal input -264VAC Efficiency up to 86% Short circuit and over voltage/current protected UL/EN9 certified, CE marked Conformal coated product The RAC35-xxG/OF
More informationParameter Condition Min. Typ. Max. Internal Input Filter 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input VAC 3W PCB mount package
More informationUniversal input VAC <250mW No load power consumption -25 C to +80 C Operating temperature, with derating
Features Universal input VAC
More informationUniversal input VAC <150mW No load power consumption
Features Regulated Converter Description Universal input 85-64VAC
More informationNote1: Typ. efficiency is 230VAC and full load 12VDC 24VDC 48VDC ms 8ms 16ms 80ms
Features Regulated Converters Universal Input 9-264V Efficiency Up To 86% Short Circuit And Over Voltage/Current Protected UL/EN695 Certified, CE Marked Conformal Coated Product RECOM Connector Set Available
More information12-15VDC (12V±5%) 24-28VDC (24V±5%)
Features Description Universal AC input (85-264VAC) Long 7 year warranty Protections: SCP, OVP, OCP, OTP 1% full load burn-in test DC OK indicator LED with relay contacts cooling by free air convection,
More informationVin= 24VDC Vout= full load with normal start-up time, no external components with <1 second start-up time + diode protection circuit
Features Switching Regulator Description Efficiency up to 96%, no need for heatsinks Pin-out compatible with LM78XX linears Low profile (L*W*H=11.6*8.5*10.4mm) Wide input range (5V - 4V) Short circuit
More informationDC-DC CONVERTERS SINGLE OUTPUT, 60 WATTS EXTREMELY WIDE 12:1 INPUT VOLTAGE RANGE: 9-75VDC, VDC RAILWAY APPLICATIONS
DC-DC CONVERTERS SINGLE OUTPUT, 60 WATTS EXTREMELY WIDE 12:1 INPUT VOLTAGE RANGE: 9-75VDC, 14-160VDC RAILWAY APPLICATIONS FEATURES 60 Watt Output Power Extremely Wide 12:1 Input range: 9-75, 14-160 Output
More informationC B. Models. Ultra wide 4:1 input voltage 20 W DC/DC. edition and EN55032 class A
DC/DC Converter Ultra wide 4:1 input voltage 20 W DC/DC converter in a 1.6 x 1 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1 3rd
More informationNotes: Note1: Other output voltages on request Note2: Efficiency is tested at nominal input (115/230VAC) and full load at +25 C ambient
Features Regulated Converter Description Household, medically and ITE certified Class II installations (without FG) IP68 waterproof encapsulation Long life components, rugged module Energy Efficiency Level
More information12-15VDC (12V±5%) 24-28VDC (24V±5%)
Features DIN Rail Description Universal AC input (85-264VAC) Long 7 year warranty Protections: SCP, OVP, OCP, OTP 1% full load burn-in test DC OK indicator LED with relay contacts cooling by free air convection,
More informationC B. Models. Operating up to 5000m altitude 5 year product warranty
DC/DC Converter Wide 2:1 input voltage 10 W DC/DC converter in a compact DIP-24 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1
More informationTEP 75WI Series, 75 Watt
TEP 75WI Series, 75 Watt Features UL 60950-1 Rugged, compact metal case Screw terminal adaptor available for easy connection EN 50155 approval for railway applications Optional DIN-rail mounting kit Ultra
More informationR0.5S_D ECONOLINE. Features. 0.5 Watt SMD Isolated Single or Dual Output. Derating-Graph (Ambient Temperature) DC/DC-Converter with 3 year Warranty
Features Unregulated Converter 1 : 1 Input Range.W SMD Package Efficiency up to 8% Approved for Medical Applications 1kVDC and 3 kvdc Isolation Option Operating Temperature from -4 C to +1 C with 3 year
More informationPXC-M06xxW Dual Output Series: DC-DC Converter Module 9 ~ 36 VDC and 18~ 75 VDC input; ±5 to ±15 VDC Dual Output 6 Watts Output Power
PXC-M06xxW Dual Output Series: DC-DC Converter Module 9 ~ 36 VDC and 18~ 75 VDC input; ±5 to ±15 VDC Dual Output 6 Watts Output Power FEATURES DUAL OUTPUT UP TO ±600mA REINFORCED INSULATION FOR 250VAC
More informationTEP 100WIR Series, 100 Watt
TEP 100WIR Series, 100 Watt Features Compact metal package Ultra wide 4:1 input voltage ranges 8.5 36, 16.5 75, 43 160 VDC EN 50155 approval for railway applications Very high efficiency up to 92% No minimum
More informationTEP160-WIRCM SERIES 160 Watt High Density Brick DC-DC Converter Measures: 2.40 x 2.28 x 0.50
Features Compact metal package Ultra wide 4:1 input voltage ranges 8.5 36, 16.5 75, 43 160 VDC EN 50155 approval for railway applications Very high efficiency up to 91% No minimum load Soft start Ajustable
More informationOrdering example: 40W, VDC in, single 12Vout, DIN Mount = RPMD SGW
Features Regulated Converters Class B EMC Filter built-in Reverse Polarity Protected Inrush Current Limiting (Soft Start) Output Trim Potentiometer Output LED Indicator DIN Rail Mounting or Panel Mount
More informationAC-DC POWER SUPPLIES UNIVERSAL INPUT, 65 WATT MEDICAL APPLICATIONS MUI65 SERIES
AC-DC POWER SUPPLIES UNIVERSAL INPUT, 65 WATT MEDICAL APPLICATIONS 2MOPP Medical FEATURES Universal Input Range Operating Temperature Range: -25º to 80ºC (with derating) Compact Package: 2.00 3.00 1.16
More informationMB2000ERUI. High Isolation, 1 x 2 20W, 4:1 Input Range DC/DC Con vert ers. Key Features:
MB2000ERUI High Isolation, 1 x 2 20W, 4:1 Input Range DC/DC Con vert ers Key Features: 20W Power 4:1 Input Voltage Range EN 60950 Approved 3,000 Isolation Efficiency to 90% Meets EN 55032 Compact 1 x 2
More informationoutput voltage output current max (A)
date 12/21/2011 page 1 of 6 SERIES: VYC0W DESCRIPTION: DC-DC CONVERTER FEATURES up to 0 W output industry standard pinout :1 input range (9 ~ 6 V, 18 ~ 7 V) single, dual, and triple outputs 1,00 V isolation
More information20W DC-DC Converter P20J-Series
20W - Converter P20J-Series Wide 4:1 input range Efficiency up to 89 % Adjustable output voltage Remote control on / off 3000 V isolation Continuous short circuit protection Over voltage protection MTBF
More informationMI1000ERW. Series. Miniature 1 x 1, 2:1 Input, 10W DC/DC Con vert ers. Key Features:
MI1000ERW Miniature 1 x 1, 2:1 Input, 10W DC/DC Con vert ers Key Features: 10W Output Power 2:1 Input Voltage Range Miniature 1 x 1 Case 1,500 VDC Isolation Meets CISPR 32/EN 55032 Remote On/Off Control
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE T A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
More informationApplication Package Dimension Output Input Output Output Protection Option Code Code Power Voltage Quantity Voltage Type (W) (VAC) (VDC)
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE T A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A F 150 U S 12 B - Application Package Dimension Output Input Output Output Protection
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
More informationIG480RW. Series. High Isolation IGBT Driver DC/DC Con vert ers.
IG480RW High Isolation IGBT Driver DC/DC Con vert ers Key Features: Operates With xx962 Drivers 4.8W Output Power Independent Outputs 3,000 Isolation Miniature DIP Case >1.0 MHour MTBF Short Circuit Protection
More information20W DC-DC Converter P20H-Series
Wide 4:1 input range Efficiency up to 90 % Adjustable output voltage Remote control on / off 1500 V isolation Continuous short circuit protection Over voltage protection Standard package 2 x 1 x 0.4 MTBF
More informationSeries AME25-JZ 25 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Series AME-JZ I/O Isolation 000VAC Low Ripple and Noise Operating Temp: -0 C to +70 C Over Voltage Protection Over current Protection Up to
More informationEfficiency (typ.) Load VDC VDC ma ma(typ.) ma(typ.) μf %
FEATURES Smallest Encapsulated 10W Industrial Standard DIP16 Package Ultrawide 4:1 Input Voltage Range Fully Regulated Output Voltage I/O Isolation 1500VDC Operating Ambient Temp. Range 40 to 88 Low No
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A D 100 U S 12 B - Application Package Dimension Output Input Output Output Protection
More informationVP ELECTRONIQUE MASSY - Tel
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise Screw Terminal For Optional CE, UL,
More informationSeries AMEL10-MJZ 10 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (VAC/Hz) FEATURES: Input Voltage (VDC) Max Output wattage (W) Output Voltage (V) Output Current max (A) Maximum
More information1W & 2W Wide Input Range DC/DC CONVERTERS. Features
1W & 2W Wide Input Range DC/DC CONVERTERS Features 8 Pin SIP Package 2:1 Wide Range Input Nominal 5V, 12V, 24V and 48V input Single and dual outputs Regulated Output 1kV isolation, 2kV &3kV options 40
More informationUniversal Power Supplies
, Features Universal input: 90 264 VAC or 120 30 VDC Active power factor correction (>0.95) High efficiency up to 93% Load share function for up to 3 units in parallel Adjustable output voltage EMI/EMC
More informationSeries AMEL20-AZ 20 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (/Hz) Input Voltage (VDC) Max wattage (W) Voltage (V) Current max (A) Maximum capacitive load (µf)
More informationMPV1060RI4. Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers. Key Features:
MPV1060RI4 Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers Key Features: 5W & 10W Output Power 10:1 Input Range 4,000 VAC Isolation Meets EN 62109 Wide -40 C to +70 C Oper. Reverse
More informationMPO-120S Series. Single Output, 180W Compact, Open Frame AC/DC Power Supplies. Key Features:
MPO-120S Series Single, 180W Compact, Open Frame AC/DC Power Supplies Key Features: 180W Power Universal 90-264 AC Power Factor Correction EN 60950 Approved High Efficiency Five Single Models Meets EN
More informationML100SRI. Series. Ultra-Miniature, 1W High Isolation, SMT DC/DC Con vert ers. Key Features:
ML100SRI Ultra-Miniature, 1W High Isolation, SMT DC/DC Con vert ers Key Features: 1W Output Power Ultra-Miniature SMT Case 4,200 VDC Isolation Single & Dual Outputs -40ºC to +105ºC Operation Meets JEDEC
More informationSeries AME10-VZ 10 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: Picture Coming Soon I/O Isolation 000VAC Continuous Short circuit protection Operating Temp: -0 C to + C Energy Star compliant Input: -VAC,
More informationEfficiency (typ.) (Range) VDC VDC ma ma(typ.) ma (typ.) ma(typ.) VDC μf % MKW15-12S05M. Output Current Input Current Reflected Ripple
FEATURES Industrial Standard 2" X 1" Package Wide 2:1 Input Range Fully Regulated Output I/O Isolation 40VAC with Reinforced Insulation, rated for 300VAC Working Low Leakage Current < 5µA Operating Ambient
More informationFeatures. LED Driver. RCOB Constant Current Active PFC Single Output. AC/DC Converter
Features LED Driver Low Cost 230VAC LED Supply 350mA to 1050mA Output, 25-44VDC Active Factor Correction >0.95 Designed to drive 15W-46W COB LEDs Terminal Block Input/Output with Cable Clamps Fully Protected
More informationMPV1560RI4. Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers. Key Features:
MPV1560RI4 Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers Key Features: 15W Output Power 10:1 Input Range 4,000 VAC Isolation Meets EN 62109 Wide -40 C to +70 C Oper. Reverse Input
More informationModel No. ( Single Output ) ATC-3.3S ATC-5S ATC-12S ATC-15S ATC-24S Max Output Wattage (W) 10W 10W 10W 10W 10W VAC or VDC
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise Screw Terminal For Optional CE, UL,
More informationSeries AMEL5-MAZ 5 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 4000 Operating Temp: -40 C to +80 C or -25 C to +80 C Input: 90-264, 47-440Hz, or 130-370VDC Over load, Over, Short Circuit Protection
More informationSeries AME5-CJZ 5 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 000V Continuous Short circuit protection Operating Temp: -2 C to 0 C Energy Star compliant Input: -26V, -6Hz, or 20-0VDC pact
More informationSeries AM1M-NZ 1 Watt DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Input Low Profile DIP case 1.5 and 3K V I/O Isolation Continuous Short circuit protection Max Input Current Full/No
More informationAPM-40 SERIES FEATURES PRODUCT OVERVIEW. Model Selection Guide. Input Specifications. AC/DC Power Module 40W, Industrial & Medical Safety
FEATURES Fully encapsulated Plastic Case 3 Mounting Versions: - PCB Mounting with Solder Pins - Chassis Mounting with Screw Terminals - DIN-Rail Mounting Package Dimension 88.9x63.5x30.0 mm (PCB Version)
More informationSeries AM20EW-NZ 20 Watt DC-DC Converter
FEATURES:0 Series AM0EW-NZ Models Single output Model Input Voltage (V) Efficiency up to 90% On/Off Remote Control Ultra-wide : Input range Over Voltage Protection No-load consumption 0.W I/Output Isolation
More informationSeries AMEL20-MAZ 20 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 4000 Energy Star compliant Operating Temp: -40 o C to +70 o C Ultra-small package Over load, Over, Short Circuit Protection Up
More informationOutput Current Input Current Max. capacitive Load
AB4S/D Series AC/DC Power Module 4W, Industrial & Medical Safety FEATURES Fully encapsulated Plastic Case 3 Mounting Versions: - PCB Mounting with Solder Pins - Chassis Mounting with Screw Terminals -
More informationEnclosed Power Supplies
, 15 150 Watt Features Very compact metal cased power supplies High operating temperature up to 70 C Low no load power consumption
More informationSeries AME60-MJZ 60 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (VAC/Hz) FEATURES: I/O Isolation VAC Continuous Short circuit protection Input under-voltage protection Low
More informationTMP & TMPM Series, 4 to 60 Watt. Order code Output power max. Output Efficiency
TMP & TMPM Series, 4 to 60 Watt Features Ultra compact, low profile plastic casing Fully encapsulated (pollution/dust) Single-, dual- and triple output models standard package versions: - Screw terminal
More informationPT SERIES SIP Package
FEATURES Industry Standard SIP 8 Package 3 Watts Isolated Output 2:1 Input Range Regulated Outputs Up to 86 % Efficiency -40 C to +85 operating temperature range Remote On/Off logic control Continuous
More informationRipple & Noise (max) (See Note 2) 5V output: 100mVp-p; 12V - 27V outputs: 150mVp-p; 48V output: 200mVp-p
FEATURES 3 Year Warranty 100% Full Load Burn-In Tested Universal AC Input / Full Range Built-In Remote Sense Function Built-In Remote ON/OFF Control Current Sharing up to 2000W (3+1) Forced Air Cooling
More informationMPU-120S Series. Single Output, 180W Compact, U-Channel AC/DC Power Supplies. Key Features:
MPU-120S Series Single, 180W Compact, U-Channel AC/DC Power Supplies Key Features: 180W Power Universal 90-264 AC Power Factor Correction EN 60950 Approved Compact U-Channel Five Single Models Meets EN
More informationPXC05-Dual Output Series: DC/DC Converter Module 9 to 75 Vdc input, 3.3 to 15 Vdc Dual Outputs, 5W
PXC05-Dual Output Series: DC/DC Converter Module 9 to 75 input, 3.3 to 15 Dual Outputs, 5W UL UL60950-1 TUV EN60950-1 CB IEC60950-1 CE MARK Features Low profile: 1.25 x 0.80 x 0.40 inches (32.0 x 20.3
More informationOutput Voltage* (nom.)(adjustable)
Industrial Power Supplies TBLC Series, 6 90 W Low profile case, module depth only 55 mm Suitable for mounting in domestic installation panels Very high efficiency and low standby power -> compliance to
More informationVER05 Series. xxx Series. 5 Watt. AC-DC Power Supplies. Models & Ratings. Input. Output
5 Watt xxx Series Energy Efficiency Level VI Barrel Jack & USB Versions Interchangeable Mains Connectors Included Universal Input Output Voltages from 5.0 V to 12.0 V Class II Construction Low Cost B R
More informationRS2/RD2-E10/T10. RoHS. 1.0W Unregulated Dual Separate Output
.0W Unregulated Dual Separate Output we energize electronics! RS2/RD2-E0/T0 Pin SIL/ 4Pin DIL Package 000VDC Isolation Up to 3000VDC Isolation Low Ripple and Noise Efficiency up to 80% Operating Temperature
More informationDDR-120 series. 120W DIN Rail Type DC-DC Converter
is a DIN Rail type DC-DC converter with main features including DIN rail-type easy installation, : SPECIFICATION MODEL OUTPUT INPUT PROTECTION OTHERS NOTE DDR-120A-12 DDR-120A-24 DC VOLTAGE RATED CURRENT
More informationIndustrial Power Supplies
50-600 Watt Features Switch mode power supplies for DIN-rail mounting 6 power ranges with 2, 3, 6, 12, 20 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise
More informationSeries AMES40-MAZ 40 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model (VAC/Hz) (VDC) Output Voltage (V) Output Current max (A) Efficiency (%) AMES40-3.3SMAZ 90-264/47-440 130-370 3.3
More informationSPECIFICATIONS: PSAK650
FEATURES RoHS Compliant Power OK Signal (Power Good, Logic low) Intelligent LED Indicators Remote On/Off and Remote Sense Function High Efficiency up to 91% Forced Current Sharing at Parallel Operation
More informationSeries AM1S-Z 1 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Series AM1S-Z Models Single output Model Input Voltage (V) FEATURES: RoHS compliant Operating temperature -4 o C to + 85 o C 4 Pin SIP Package Input
More informationConstant Voltage Mode
FEATURES: AC Input 1~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP Flicker Free High Operating Ambient Temp.: -3 ~+6 Surge protection: L-N 4KV, L-FG/N-FG 8KV Safety: UL 875 / PSE EMI:
More informationFeatures. Evaluation Module. Evaluation Module R-78S EVM-1
Features Evaluation Module 3.3V from a single AA battery or from an external source (boost converter) Efficiency 93%, >80% at 0% load Input voltage range down to 0.65V Input and output power measurement
More informationDDR-120 series. 120W DIN Rail Type DC-DC Converter
DIN Rail Type DC-DC Converter + is a DIN Rail type DC-DC converter with main features including DIN rail-type easy installation, : DIN Rail Type DC-DC Converter SPECIFICATION MODEL OUTPUT INPUT PROTECTION
More informationSwitching Power Supplies
, RoHS compliant Features Ultracompact Open-Frame Switching Power Supply Easy Connection via Screw Terminal Block Universal Input 85 264 VAC, 50/60Hz Industrial Grade Components ow Ripple and oise Overload
More informationR-78S Evaluation Module. Caution: ESD sensitive. Always follow ESD preventative procedures when handling the product!
Features Evaluation Module 3.3V from a single AA battery (boost converter or from an external source Efficiency 93%, >80% at 10% load Input range down to 0.65V Input and output current measurement capability
More informationOutput Voltage* (nom.)(adjustable)
Industrial Power Supplies TBLC Series, 6 90 W Low profile case, module depth only 59,5mm Suitable for mounting in domestic installation panels Low output ripples and spikes Fully compliance to ECO-Standard
More informationWatts. xppower.com. General. Input. Environmental. EMC & Safety. Output. IT & Medical Approvals. Energy Efficiency Level V, CEC2008 & EISA 2007
AC-DC 85-50 Watts AHM Series IT & Medical Approvals xppower.com Energy Efficiency Level V, CEC008 & EISA 007
More informationDatasheet. ACF-10 Series AC/DC Power Module 10W
Datasheet ACF-10 Series AC/DC Power Module 10W The information contained in this document has been carefully researched and is, to the best of our knowledge, accurate. However, we assume no liability for
More informationQKS48T21120 DC-DC Bus Converter Data Sheet Quarter-Brick with 48VDC Input; 21A Output
Quarter-Brick with 48 Input; 12 @ 21A Output Benefits Simplifies power system design; reduces design time and technical risk Compatible with all (12 Vin nom.) POLs available in the market Applications
More informationVEL05 Series. xxx Series. 5 Watt. AC-DC Power Supplies. Models & Ratings. Input
5 Watt xxx Series Energy Efficiency Level VI Barrel Jack & USB Versions Fixed Mains Connectors Universal Input Output Voltages from 5.0 V to 12.0 V Class II Construction Low Cost B R A N D The VEL05 series
More informationSafety Standards. Model Number:
060BAS12 A Highlights & Features Meet Efficiency Level VI Safety Approvals to IEC 60601-1 3rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More informationIndustrial Power Supplies
75-600 Watt Features Switch mode power supplies for DIN-rail mounting 4 power ranges with 3, 6, 12 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise EMI complies
More information400AUS24 B MDS AUS. MDS Medical AC-DC Open Frame 24Volt, 400Watt / MDS-400AUS24 B. General Description. Model Information. Model Numbering ```
400AUS24 B Highlights & Features Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More information040APS12 B MDS. MDS Medical AC-DC Open Frame 12Volt, 40Watt / MDS-040APS12 B ``` Highlights & Features. Safety Standards.
040APS12 B Highlights & Features Safety Approvals to IEC 60601-1 3rd ed. & IEC 60950-1 Risk management report available Low touch current (
More informationVEL05 Series. xxx Series. 5 Watt. AC-DC Power Supplies. Models & Ratings. Input
5 Watt xxx Series Energy Efficiency Level VI Barrel Jack & USB Versions Fixed Mains Connectors Universal Input Output Voltages from 5.0 V to 12.0 V Class II Construction Low Cost BRAND The VEL05 series
More informationDC/DC Converter E_S-1WR2 & F_S-1WR2 series
1W, Fixed input voltage, isolated & unregulated dual/single output FEATURES Compact SIP package International standard pin-out High efficiency up to 81% Isolation voltage: 3K VDC Operating temperature
More information